SDGV LED Device mount Product news for efficiency and technology Made in Germany
SDGV LED the logical component of the already successful SDT system has been beefed up convert your SDT system to LED now and save energy! remarkably high luminance up to 7600 lm/unit energy efficiency featuring up to 115 lm/watt quality LED in fine-binning mode, with outstanding colour consistency lighting technologies for all applications ideal for high bay rack areas: the new system conforms with the latest regulations, thanks to special mirrors and sensors intelligent functions: light and presence sensors, emergency lighting outstanding efficiency up to 91% Comparison of energy efficiency SDGV LED Comparative calculation*: Standard LED-lighting Luminaire SDT+SDG+SDR T8 SDT+SDGV LED 7000 Light source 1x T8 58W EVG 60W 7000 lm 840 Lighting suggestion/ requisite number of luminaires 218.400lm/ 42 luminaires Average illuminance 306lx 308lx 210.000lm/ 30 luminaires Total power consumption 2310W 1950W Efficiency indicator 1,68 W/m²/100 lx 1,41 W/m²/100 lx Number of luminaires saved 12 luminaires saved Efficiency optimization 16% *Room situation: Room 30m length, 15m width, room height 5m, mounting height 4,5m, standard reflection factors (0,7 ceiling; 0,5 walls; 0,2 floor)
SDGV LED 3 SDGV-LED ProduCT news for efficiency and technology Out with the old and in with the new, as the saying goes; but we have also (as is our wont) retained the tried and true! Which is to say that our LED modules are now the best option for our rapid mounting SDT system. We have retained the tried and true mounting rails and contact system, not to mention superior quality lighting technology that offers top notch efficiency for all applications. Which means that it is a snap to convert your SDT system to LED. And so what s new amongst all this tried and true? Well we have added intelligent functions to the device mount such as sensors, emergency lighting and adaptors for projectors. And what is more, the optimized-for-led optical guides can be readily fitted onto the device mount using snap-in closures. In short, these new modules make the SDT system more versatile than ever before. Quality criteria Temperature management housing construction optimal in terms of material and form for passive, fanless cooling LED technology high performance, quality LEDs good colour rendering (Ra=80) frequently and quickly switchable, if required via sensorics outstanding energy efficiency thanks to a dimming function Energy efficiency high efficiency class up to 115 lm/w driver for complete service life Lighting technology high light output ratio due to optimised light control mirrors optimized for various lighting requirements: narrow beam, asymmetrical, wide narrow beam, extremely narrow beam (for shelf storage) general diffuse luminaire with slightly frosted diffuser for a high degree of lighting uniformity Product design LED SDGV can be combined with the SDT system as a device mount large area lighting via LED Application areas shelf storage, factory halls, retail spaces, showrooms, training venues, archives
1 2 1 Device mount SDGV LED + SDFH high bay reflector + S3 high bay sensors for large heights (Corridor function for 7000 lm) Sensor unit with integrated Highbay LC-OM presence sensor (lighting comes on or is dimmed thanks to the Corridor function). Comes wired and ready to connect. Can be used with ceiling heights of up to 10 metres. Device mount with integrated nine-pin plug and four occupied contact pins. For further information see the Light Control section of our main catalogue 2 Device mount SDGV LED + SDFT narrow distribution reflector + NL B3 emergency light unit Complete 6500 K LED emergency lighting module, including battery for escape route emergency lighting, integrated into the device mount. With high temperature 2Ah NiMH battery pack (rated duration: three hours); plus a special LED lens lighting system for 1.0 lx illuminance at minimum (according to EN 1838).
SDGV LED device mount Modules; combination options 3 4 5 3 Device mount SDGV LED + SDFB wide distribution reflector + M1S1 light and presence sensor + reflector connector + reflector end caps (Auxiliary SDBA S1/M1S1 light and presence sensor) Master module with integrated controller and sensor for daylight and presence dependent control of up to 32 Dali slave luminaire drivers. Wired and ready to connect via an integrated nine pin plug. Includes a programming button that s accessible from the outside. Functions: on/off daylight dependent lighting control; presence function. For further information see the Light Control section of our main catalogue. 4 Device mount SDGV LED + SDFA asymmetrical reflector + three phase track on request 5 Device mount SDGV LED open distribution
6 SDGV LED Device mount Housing: Device mount constructed of galvanized sectional white (RAL 9016) sheet steel; LED module constructed of extruded aluminum profile; anodised finish; PMMA diffuser, lightly frosted; end caps of plastic; position adjustable in strip lighting. Installation: Mounted via a plastic sash lock on the mounting rail. Each SDT mounting rail module integrates a five, seven, or 11 pole unit. The device mount, which features an integrated three, four or five pole rapid mounting plug, allows for tool-free phase selection by pushing the contact pin. Illuminant: LED included in the delivery. Light colour: neutral white (840) with outstanding colour rendering index (RA = 80); warm white (830) available by special order. Luminous flux: 4000, 7000 and 7600 lm. Lighting technology: Light distribution modes: direct-diffuse; asymmetric; narrow beam; wide narrow beam; extremely narrow beam (high bay) via cantilevered mirror reflectors. Other: Dali and 1-10V dimmable. M1S1 presence and daylight sensor; S3 presence sensor for large heights, with Corridor function (available with 7000 lm model only). Modular design: Order SDT mounting rails, fastening systems and mirror reflectors separately. SDT SDGV LED + = Combination sfi1ip 40 SDT+SDGV/1500 LED 35 W 4000 lm 840 η LB 91 % lm/w 112 direct/indirect 100/0 % UGR q/l 25,9/26,4 340 255 170 85 cd/klm Products Unit Length LED configuration Ballast Item number G SDGV LED IP 40 1500 1531mm LED 60W 7000lm 840 Driver 1820 3014 150 2,70 Driver DALI 1820 3016 650 2,70 Driver DALI + S3 1820 3216 650 2,89 Driver DALI + NL-B3 1820 3716 650 3,04 Driver DALI + M1S1 1820 3116 650 2,86 1500 1531mm LED 70W 7600lm 840 Driver 1820 2014 150 2,70 Driver DALI 1820 2016 650 2,70 Driver 1-10V 1820 2015 150 2,70 Driver + S3 1820 2214 150 2,89 Driver + NL-B3 1820 2716 650 3,04 Driver DALI + M1S1 1820 2116 650 2,86 1500 1531mm LED 35W 4000lm 840 Driver 1820 1014 150 2,70 Driver DALI 1820 1016 650 2,70 Driver 1-10V 1820 1015 150 2,70 Driver + S3 1820 1214 150 2,89 Driver + NL-B3 1820 1716 650 3,04 Driver DALI + M1S1 1820 1116 650 2,86 SDGV LED 55 43 SDGV LED S3 116 SDT+SDGV LED 63 73 60
SDGV LED 7 Accessories SDFA LED SDFB LED SDFT LED SDFH LED Accessories SDGV LED 1500 Type Colour Material Item number V G Mirror asymmetric angle SDFA LED 1500 aes al 1873 6000 100 1 0,17 Mirror wide angle SDFB LED 1500 aes al 1873 3000 100 1 0,14 Mirror narrow angle SDFT LED 1500 aes al 1873 4000 100 1 0,14 Mirror extremely narrow distribution (high bay) SDfh LED 1500 aeh al 1873 9000 100 1 0,15 Mirror connector SDFAV LED aes al 1873 6001 100 1 0,10 Mirror connector SDFBV LED aes al 1873 3001 100 1 0,10 Mirror connector SDFTV LED aes al 1873 4001 100 1 0,10 Mirror end piece SDFAE LED aes al 1873 6002 100 1 0,10 Mirror end piece SDFBE LED aes al 1873 3002 100 1 0,10 Mirror end piece SDFTE LED aes al 1873 4002 100 1 0,10 Spare parts SDGV LED 1500 Type Colour Material Item number V G Contact pin SDG-Contact 1-Pol me St+mix 9200 0267 101 1 0,01 Installation note 1 Mounting rail 2 Mounting rail connectors (SDTV) 3 Front side of mounting rail (SDTES) 4 Mounting rail fasteners (e.g. SDH) 5 Device mount (SDGV LED) 6 Optical guides (e.g. SDFB LED) 7 Mirror connector (e.g. SDFBV LED) 8 Mirror end piece (e.g. SDFBE LED)
9999 1401 212 1A 1000 10/12 AD/AD Subject to changes Overview - LED luminaires alvia vakant MLF LED heip cooky LED planara lens LED PU LED peanut doma LED WBLR LED WQL LED SDGV LED Verifiably printed on FSC paper. Regiolux Made in Germany Regiolux GmbH Hellinger Straße 3 D 97486 Königsberg T +49 9525 89 0 F +49 9525 89 7 info@regiolux.de www.regiolux.de