Small Light Capacity Electromagnetic Vibratory Feeders Model FT0CR 0.5 tonnes per hour* Light capacity model FT0CR with standard 40mm x 300mm trough has a maximum capacity of 500kg per hour. This dependable feeder is ideal for applications demanding top performance at budget prices. Common applications include metering small quantities of dry materials or conveying small parts. Tuning procedures have been simplified as they are performed externally. Model FT01 2 tonnes per hour* Model FT01 with standard 80mm x 460mm trough has a maximum capacity of 2 tph. This unit is designed for simple field adjustment as all tuning is performed externally. Model F010 4 tonnes per hour* The F010 with standard 125mm x 500mm trough is designed with a dust tight electromagnetic drive and has a maximum capacity of 4 tph.
Small Light Capacity Electromagnetic Vibratory Feeders Model FT0CR 0.5 tonnes per hour * Approx Power Consumption RC (240V 50Hz) Approx Current Input Approx Net Weight Approx Shipping Weight, Feeder & Controller Max Trough Mass Max Trough Length 18 Watts 0.3 Amps 7 kg 10 kg 2 kg 300 mm Trough Type A B C D E F G H J K L N Standard Flat Pan 40 300 165 25 172 85 220 120-159 57 13 Specific Flan Pan 50 200 165 25 172 85 220 120-159 57 13 Specific V-Shape - 300 150 25 151 85 220 120-159 57 13 Specific Tubular 25 Ø 300 150-161 85 220 120 20 Ø 159 57 13 Model FT01 2 tonnes per hour * Approx Power Consumption RC (240V 50Hz) Approx Current Input Approx Net Weight Approx Shipping Weight, Feeder & Controller Max Trough Mass Max Trough Length 30 Watts 0.45 Amps 15 kg 18 kg 3.5 kg 460 mm Trough Type A B C D E F G H J K L M Standard Flat Pan 80 460 330 45 220 130 230 150-143 79 21 Specific Flat Pan 100 460 330 45 220 130 230 150-143 79 21 Specific Flat Pan 150 300 170 45 220 130 230 150-143 79 21 Specific V-Shape - 460 330 50 225 130 230 150-143 79 21 Specific Tubular 50 Ø 460 330-229 130 230 150 45 Ø 143 79 21 Specific Tubular 75 Ø 460 330-254 130 230 150 70 Ø 143 79 21 Model F010 4 tonnes per hour * Approx Power Consumption RC (240V 50Hz) Approx Current Input Approx Net Weight Approx Shipping Weight, Feeder & Controller Max Trough Mass Max Trough Length 75 Watts 1.25 Amps 22 kg 25 kg 5.5 kg 600 mm Trough Type A B C D E F G H J K L M Standard Flat Pan 125 500 330 50 230 155 275 150-197 79 25 Specific Flat Pan 100 500 330 50 230 155 275 150-197 79 25 Specific Flat Pan 125 600 380 50 230 155 275 150-197 79 25 Specific Flat Pan 150 460 385 50 230 155 275 150-197 79 25 Specific Tubular 75 460 305 50 290 155 275 150 70 Ø 197 79 25 All dimensions are in mm. Have dimensions certified for installation purposes. * Feed rate based on free flowing granular material @ 1600kg/m³ on standard flat pan. For controller details refer separate sheet Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. SLCC10
Standard Light Capacity Electromagnetic Vibratory Feeders Model BF01 5 tonnes per hour* Model BF01 gives you maximum feed control through instantaneous material flow cut-off. The nominated maximum capacity is for a unit with a standard 150mm x 600mm trough. The electromagnetic drive is dust-proof and splash proof and can be cleaned with steam or water without damaging any electrical components. Model BF2 7.5 tonnes per hour* Model BF2 offers the same innovative features as the smaller model BF-01, but with a higher feeding capacity of 7.5 tph from a feeder using a standard 200mm x 800mm trough. Pictures: Top BF01 Tube Feeder Above BF2 Feeder with rigid trough.
Standard Light Capacity Electromagnetic Vibratory Feeders Model BF01 5 tonnes per hour * Approx Power Consumption RC (240V 50Hz) Approx Current Input Approx Net Weight Approx Shipping Weight, Feeder & Controller Max Trough Mass Suggested Max Trough Length 50 Watts 1 Amps 18 kg 21 kg 6 kg 600 mm Trough Type A B C D E F G H J K L Standard Flat Pan 150 600 380 50 245 170 275 170-168 79 Specific Flat Pan 125 500 360 50 245 170 275 170-168 79 Specific Flat Pan 200 500 360 50 245 170 275 170-168 79 Specific V-Shape 250 500 360 50 245 170 275 170-168 79 Specific Tubular 250 450 340 50 245 170 275 170-168 79 Specific Tubular 75 Ø 600 380 75 Ø 270 170 275 170 175 Ø 168 79 Model BF2 7.5 tonnes per hour * Approx Power Consumption RC (240V 50Hz) 120 Watts Approx Current Input 2 Amps Approx Net Weight 35 kg Approx Shipping Weight, Feeder & Controller 55 kg Max Trough Mass 9.5 kg Suggested Max Trough Length 1100 mm Trough Type A B C D E F G H J K L M N Standard Flat Pan 200 800 480 50 295 200 300 215-178 152 19 76 Specific Flat Pan 350 600 360 50 295 200 300 215-178 152 19 76 Specific Flat Pan 400 750 440 50 295 200 300 215-178 152 19 76 Specific V-Shape 550 500 310 50 295 200 300 215-178 152 19 76 Specific Tubular 250 1100 660 50 295 200 300 215-178 152 19 76 Specific Tubular 75Ø 800 480 75Ø 320 200 300 215 200 Ø 178 152 19 76 All dimensions are in mm. Have dimensions certified for installation purposes. * Feed rate based on free flowing granular material @ 1600kg/m³ on standard flat pan. For controller details refer separate sheet Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. StLCC10
Light Medium Capacity Electromagnetic Vibratory Feeders Ideal for installation into demanding environments such as foundries, mines or heavy mineral processing plants. When suspension mounting is preferred and feed rates still low as in sampling operations, we recommend either the F152 or F212. These units are the smallest electromagnetic feeders having the same design and construction as the Syntron medium and heavy duty feeders Model F152 12 tonnes per hour* With a capacity of 12 tph Model F152 carries heavier troughs and greater head load. This unit is commonly used in blending, mixing, sampling and packaging operations. Model F212 25 tonnes per hour* Model F212 offers the same design features as the model F152, but with a maximum capacity of 25 tph Pictures: Top Suspension mounted F152 Feeder with heated pan liner - Iron Ore Sample Plant, Above Base mounted F212 Feeder
Light Medium Capacity Electromagnetic Vibratory Feeders Model F152 12 tonnes per hour * Approx Power Consumption RC (240V 50Hz) Approx Current Input Approx Net Weight 90 Watts 1.5 Amps 55 kg Trough Type A B C D E F G H J K L M N Standard Flat Pan 250 600 215 65 367 204 258 267 405 560 370 305 152 Specific Flat Pan 200 460 280 65 367 204 183 267 405 485 320 305 152 Specific Flat Pan 150 600 215 65 367 204 258 267 405 560 270 305 152 Specific Flat Pan 300 400 315 65 367 204 158 267 405 485 420 305 152 Model F212 25 tonnes per hour * Approx Power Consumption RC (240V 50Hz) 150 Watts Approx Current Input 2.5 Amps Approx Net Weight 85 kg Trough Type A B C D E F G H J K L M N Standard Flat Pan 300 700 320 75 445 305 326 320 515 691 422 380 175 Specific Flat Pan 200 900 225 75 445 305 431 320 515 616 322 380 175 Specific Flat Pan 350 500 365 75 422 305 170 297 515 575 472 380 175 Specific Flat Pan 400 600 375 75 445 305 281 320 515 686 522 380 175 All dimensions are in mm. Have dimensions certified for installation purposes. * Feed rate based on free flowing granular material @ 1600kg/m³ on standard flat pan. For controller details refer separate sheet Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. LMCC10
Medium Capacity Electromagnetic Vibratory Feeders This range of Syntron electromagnetic feeders offers medium capacity units all with heavy duty construction suitable for the most adverse conditions. Model F22 Model FH22 50 tonnes per hour* 100 tonnes per hour* Model FR290 Model FR370 180 tonnes per hour* 250 tonnes per hour* Picture: Base mounted FR290 Feeder handling crushed glass.
Medium Capacity Electromagnetic Vibratory Feeders These feeders are ideal for use in mixing, blending and general feeding of a large range of materials. Standard units can be utilised for feeding ore or minerals into a processing plant. While Specialised feeders are available for a variety of purposes such as inspection feeders in food processing for example. All units are specifically designed and tested to suit any duty requirements. Our standard troughs are manufactured in mild steel with abrasion resistant wear liners. Units are controlled by a separate controller assembly generally using a single phase 415V 50Hz supply. Models F22 & FH22 use a controller with manual rate adjustment and minimum & maximum set points. The FR290 & FR370 are fitted with a closed loop stroke monitoring controller to ensure consistent feed rate by compensating for influences such as variations in material loading on the trough surface and fluctuations in supply voltage. Units can be supplied with special controllers for specific requirements. Feeders are suspension mounted as standard, however base mounted units are available if required. Please contact our sales engineers with your duty requirements for professional assessment and advice on your material handling needs MODEL A B C D E F G H J K F22 400 800 875 155 125 175 1240 575 500 450 FH22 500 1000 830 395 125 370 1430 690 500 685 FR290 (1) FR290 (2) 600 750 1200 1400 1100 1290 395 375 125 125 210 200 1750 1870 800 800 800 800 560 585 FR370 (1) FR370 (2) 750 900 1400 1600 1170 1470 520 500 150 150 255 260 2050 2340 All dimensions are in mm. Have dimensions certified for installation purposes. (1) Standard trough with abrasion resistant liners suitable for aggressive materials. (2) Standard trough with stainless steel contact surfaces. 1055 1200 MODEL RANGE F22 FH22 FR290 FR370 Machine weight with standard trough 195 kg 250 kg 400 kg 800 kg Rated current ** at 415V 50Hz Supply 4 Amps 5 Amps 8 Amps 16 Amps Controller Model (standard) TC8 TC8 TCA20 TCA20 * Feed rate based free flowing material, standard lined trough at 10 downslope running at maximum stroke and when correctly installed under a Syntechtron approved hopper outlet. ** Larger units are custom built to the application and ratings may vary (240V available for F22 & FH22 on application). Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. MCC10 900 900 675 715
High Stroke Model FV Electromagnetic Vibratory Feeders Bulk Material Feeding with full range control Electromagnetic feeders have always been the best for the job. The Syntechtron range of Syntron High-Stroke machines introduce flexibility in use and eliminates the problems commonly found with less advanced electromagnetic feeders. Feeders operating at 33Hz provide important benefits in many areas of feeder operation. Improved Feed Rate A lower operating frequency means that the feeder can vibrate at a higher stroke. The feed rate of feeders operating at 33Hz are improved by at least 30% of those operating at 50Hz and match most mechanical feeders. Greater Head Load The high power obtainable from an electromagnet operating well below saturation means greater power for a given size of drive. Quieter Operation The lower frequency of vibration means there is a minimum of 8dB(A) reduction in noise level compared with a similar 50Hz Machine. Improved Feeding of Material High-Stroke feeders provide vibrations which penetrate material far into the hopper above them, loosening stubborn material and moving fine, powdery material at high velocity. This eliminates aeration problems that result from using high frequency feeders with shallow drive angles. Wider Range Feeders are available in much larger sizes and screening operations like grizzlies have dramatically more effect at a higher stroke. This is beneficial to the user as the results are smaller, quieter machines for a given capacity. Feeders can also be supplied with twin and dual drives for even higher capacities. Dependable, flexible control sets Syntron feeders apart from other feeding and conveying equipment. Feed rates are easily adjusted and response is instantaneous. Control devices can be supplied for integration with systems using external signals from automatic sensing devices in instruments. Special control arrangements are also available for selecting and sequencing a group of feeders. Syntron Heavy-Duty Electromagnetic Feeders require little maintenance as the design eliminates mechanical wearing parts as there are no cams, eccentrics, belts or bearings; thus reducing parts replacement and the need for lubrication. All movement is confined to a stack of heavy duty leaf springs. Electrical components such as the coil assembly will provide years of service under normal operating conditions. Dust tight drive units are standard on all models. Also available are drive units for use in Class 1 (Zone 1) hazardous areas with associated approval as fixed apparatus in coal or shale mines. Picture: FVD540 Feeder and Hopper assembly with motorised gate.
High Stroke Model FV Electromagnetic Vibratory Feeders MODEL A B CD CT D E F G H K FV440 (1) 900 1400 1175 555 180 430 2205 1200 880 FV440 (2) 1000 1800 1200 575 180 480 2340 1300 1010 FV480 (1) 1200 1600 1330 591 200 590 2430 1600 1000 FV480 (2) 1300 2200 1600 570 200 520 2660 1800 1150 FV540 (1) 1400 1800 1583 660 250 674 2840 1900 1100 FV540 (2) 1600 2500 1500 660 250 630 3220 2100 1275 FV650 (1) 1600 2000 1800 610 250 725 3350 2200 1300 FV650 (2) 2000 3000 2000 955 250 700 3650 2500 1450 FV890 (1) 2200 2500 2425 725 250 750 3775 2800 1475 FV890 (2) 2500 3400 2555 785 250 765 4055 3000 1615 FV990 (1) 2200 3000 2725 850 300 850 4335 2800 1720 FV990 (2) 2500 4000 2550 1385 300 865 4720 3100 1910 All dimensions are in mm. Have dimensions certified for installation purposes. (1) Standard trough with abrasion resistant liners suitable for aggressive materials. (2) Standard trough with stainless steel contact surfaces. MODEL RANGE FV440 FV480 FV540 FV650 FV890 FV990 Machine weight with standard trough 1300 kg 2000 kg 3400 kg 5000 kg 7500 kg 9200 kg Rated current ** at 415V 50Hz Supply 30 Amps 40 Amps 60 Amps 75 Amps 140 Amps 175 Amps Controller Model CT32 CT50 CT63 CT75 CT140 CT175 Nominal Capacity - * Crushed Stone (1.6t/m³) Coal (0.8t/m³) 400 t.p.h. 450 t.p.h. 650 t.p.h. 700 t.p.h. 900 t.p.h. 1100 t.p.h. 1400 t.p.h. 1500 t.p.h. 2000 t.p.h. 2250 t.p.h. 2500 t.p.h. 2750 t.p.h. * Feed rate based free flowing material, standard lined trough at 10 downslope running at maximum stroke and when correctly installed under a Syntechtron approved hopper outlet. ** Larger units are custom built to the application and ratings may vary. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. HDC10
Vibratory Loss in Weight Feeders Vibratory Loss-In-Weight Systems: For any process where tight control of feed rate and accountability of material is required, Loss-In-Weight Systems are the answer. The range of Syntechtron Loss-In-Weight Feeders is designed for applications demanding high accuracy over a range of capacities. The end result is a manufactured product of improved quality from the consistent feed rates achieved. A compact and versatile Controller provides a completely automated operation. When in Auto-Mode the material is delivered at a constant rate (by weight), refilling the hopper while operating, having no effect on the output. The Controller can be interrogated to show all aspects of the operation and can even be monitored remotely. A manual mode is provided for maintenance and setting-up operations. Typical Blending & Batching Applications: Plastics resins, pellets, regrinds Chemical oxidisers, minerals, explosives Cosmetic pigments, powders, fillers Food sugar, salt, cereals, nuts, ingredients Building raw materials, glass Mining coal, aggregate, iron ore Benefits: No rotating parts Low maintenance Large range of capacities Simple operation Accurate control Millisecond response Sanitary finish available Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. LIWC10
Volumetric Feeder Machines Volumetric Feeder Machines Simple design and flexible control account for the efficient, economical performance of Syntron Volumetric Feeder Machines, and the growing industrial preference for them. These units can feed most dry bulk materials and can be supplied to meet food grade standards. Syntron Volumetric Feeder Machine designs include four basic components: a supply hopper, a hopper vibrator, a vibrating feeder and the supporting frame, with supply hoppers fabricated from either mild or stainless steel. Because of their simple design, Syntron Volumetric Feeder Machines are dependable and have an exceptionally long service life. There are no moving parts such as motors, belts, gears, valves, connecting arms or sliding rods to wear or lubricate. Syntron Volumetric Feeder Machines are supplied with electric controls that can be mounted separately at any desired location. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. VFME10
Model DSS Horizontal Vibrating Screens Picture: DSS1512 De-watering Screen with Polyurethane Screen Panels
Model DSS Horizontal Vibrating Screens Model A B C D E F G H J K mm mm mm mm mm mm mm mm mm mm DSS138 915 2438 2541 1839 302 622 1535 288 1075 2853 DSS1410 1219 3048 3214 2035 510 678 1497 322 1470 3413 DSS1512 1524 3658 3828 2531 590 761 1861 381 1800 4017 DSS1612 1830 3658 3811 2390 579 697 1832 367 2200 4034 DSS1614 1830 4267 4432 3109 515 695 1964 285 2200 4635 DSS1616 1830 4877 5043 3598 565 742 2014 328 2240 5247 DSS1716 2135 4877 5043 3649 620 885 2366 435 2545 5241 DSS1816 2450 4877 5033 3600 562 751 2049 383 2832 5359 Please note: These dimensions are derived from equipment designed for a specific application and are a guide only. Syntechtron can design screen equipment to any size, to suit any application in any environment. These units employ a straight line vibratory action, can incorporate a variety of screen panel types & sizes and can be installed at various inclinations. They are commonly used in the following applications: Fines Recovery This is the recovery of fines from slurries. Commonly used with sand, salt, coal and gypsum. Units are available in all standard sizes up to 2400mm wide x 4800mm long in single deck configuration, usually supplied with 45mm thick polyurethane panels. Sizing This is the separation of dry and moist material feed on the basis of size. Units are available in all standard sizes up to 2400mm wide x 4800mm long in single deck configuration, but can be supplied with multiple decks. Units can be supplied with modular poly panels, woven wire, punched plate or lightweight grizzly decks. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. DSSE10
Model DS Horizontal Vibrating Screens These units employ straight line action and are commonly used in carbon in pulp gold plants, ion exchange resin separation plants and other solid liquid separations. Units are available in all standard sizes up to 2400mm wide x 5400mm long in single deck configuration, but can also be supplied with multiple decks. Usually supplied with 40mm thick polyurethane panels, but can be supplied with fully stainless steel modular wedge wire panels for processes operating above 80 degrees Celsius. Picture: EDS226 Dual Deck Screen with Covers & Discharge Spout
Model DS Horizontal Vibrating Screens Model A B C D E F G H J K mm mm mm mm mm mm mm mm mm mm DS124 610 1219 1000 900 230 445 1140 190 865 1275 DS126 610 1830 1680 1200 230 445 1140 190 865 1885 DS136 915 1830 1995 1040 505 430 1255 195 1075 2180 DS138 915 2438 2605 1650 505 430 1255 195 1075 2790 DS146 1220 1830 1995 1040 505 430 1255 195 1380 2180 DS148 1220 2438 2605 1650 505 458 1395 195 1380 2790 DS1410 1220 3048 3205 2070 465 458 1345 195 1380 3400 DS1412 1220 3658 3815 2990 380 458 1345 195 1380 4010 DS1510 1525 3048 3205 2070 465 580 1515 195 1685 3400 DS1512 1525 3658 3815 2990 380 580 1515 130 1685 4000 DS1514 1525 4267 3205 3600 380 580 1515 195 1685 4610 DS1612 1830 3658 3815 2990 380 580 1600 195 1990 4000 DS1614 1830 4267 4425 3600 380 580 1600 195 1990 4610 DS1616 1830 4877 5035 4210 380 580 1700 195 1990 5220 DS1816 2440 4877 5035 4210 380 580 1700 195 2600 5220 Please note: These dimensions are derived from equipment designed for a specific application and are a guide only. Syntechtron can design screen equipment to any size, to suit any application in any environment. Vibrating Screens are fitted with two out-of-balance motors to suit the application Above data is based on 415 Volt 50 Hz supply, however units can be supplied for 460V/240V/220V/110V 50Hz/60Hz service. Units can be provided with special features for specific process or site requirements such as: Alternative motor voltage and protection Special mounting arrangements Special screen dressings Inlet / Outlet wear liners Full stainless steel or galvanised frames Multiple screen decks Support Frames Outlet chutes Dust sealing Inlet Chutes Spray bars Covers Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. DSE10
Model NRM Vibrating Screen System Model NRM Vibrating Screen System The Syntechtron Model NRM liquid vibrating screening system is specifically designed as a modular unit for the efficient separation of solids from liquids or slurries. For use in the sugar processing, canning, general food processing, effluent treatment, paper and pulp production, juice and oil; extraction, distilling and many other industries. The system consists of a Model NRM vibrating screen, support stand incorporating adjustable down slope to suit the application, a liquid collection under pan, inlet weir box with internal anti surge baffles and adjustable weir, and deck flushing spray bar. They are designed for continuous inline operation, with all product contact surfaces constructed from stainless steel. The NRM vibrating screen is available with a range of stainless steel woven wire screen cloths down to 100 microns aperture. A typical application example of a Model NRM-148 Liquid Vibrating Screen System with nominal 1200mm wide x 2400mm long deck fitted with 300 micron aperture screen cloth to remove fibre particles screening 75 m 3 /hr of Sugar Liquor Units can be provided with special features as may be needed for process or site requirements. Optional features include; Special screen cloths (down to 100 microns aperture), Full stainless steel construction, Covers, Wear liners and Special mounting arrangements. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. NRMF10
Electromagnetic Screening Feeders Benefits of using Syntron Electromagnetic Screening Feeders include: Complete controllability using Syntechtron Electronic Controllers Continuous or intermittent operation ideal in batching processes Low maintenance Available with stainless steel decks & screen materials Full sanitary finishes available Low noise Base or Suspension mounted units available Quick release screen dressings available Variety of Screen sizes and dressings Screens can also operate as Feeders Single, double & triple deck units available Can be designed with covers, inlets & downspouts Drives can be above or below deck to best suit the application Syntron Electromagnetic Screening Feeders are ideal for the sizing, separating, de-dusting and dewatering of a wide range of products and materials. Syntechtrons range of Screening Feeders offers various screening materials and apertures to suit all duty requirements and combine high frequency / low amplitude operation. This optimises the screening of finer as well as reducing degradation of the product. All Feeders are available with Electronic Controllers allowing the Feeder to be controlled at the precise vibration amplitude to ensure efficient screening of the product.
Electromagnetic Screening Feeders Model A B C D E F G H Max Current Weight SFT01 75 380 250 75 230 127 230 150 0.45 A 15 kg SFT01 150 250 120 75 230 127 230 150 0.45 A 15 kg SBF01 150 450 300 75 245 167 275 170 1.0 A 25 kg SBF01 200 300 180 75 245 167 275 170 1.0 A 25 kg SBF2 200 600 380 75 290 203 321 215 2.0 A 35 kg SBF2 200 800 500 75 290 203 321 215 2.0 A 35 kg Model A B C D F G H J K M N P R Max Current Weight SF152 150 610 135 75 305 505 330 115 460 405 160 222 273 1.5 A 45 kg SF152 200 450 210 75 305 460 330 115 460 405 85 222 324 1.5 A 45 kg SF212 200 915 125 75 380 630 400 140 530 480 355 305 330 2.5 A 110 kg SF212 305 610 275 75 380 620 400 140 530 480 200 305 432 2.5 A 110 kg SF22 305 1065 203 127 502 780 640 210 840 850 237 500 432 4.0 A 275 kg SFH22 450 1200 203 200 502 780 640 210 840 850 370 500 575 5.0 A 330 kg All dimensions are in mm. Have dimensions certified for installation purposes. All Feeders are 240 Volts (standard) except for the SFH22 (415V). Most Feeders can be supplied for 415 V operation for specific applications. For controller details refer separate sheet Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. ESF10
Model VS Vibrating Screens Picture: EVS135 Vibratory Screens This is the most cost effective Vibratory Screen in our range. VS Screens have a simplified construction fitted with a single Rotary Vibrator Motor. The VS range is suitable for general dry screening or solids recovery. The Syntechtron Model VS single rotary vibrator screen is one of the many types of screening units offered by Syntechtron to meet your specific requirements. With over 30 years of experience our engineers would be please to examine your duty requirements and recommend the most suitable vibrating screen Economical With simple construction and a single rotary vibratory drive unit, our large range of standard units are cost effective and require little maintenance. Flexible The wide range of screen sizes can be set up at various angles and fitted with a variety of screen dressings to meet duty requirements.
Model VS Vibrating Screens Model 10 Incline 20 Incline A B C mm mm mm D E F G D E F G mm mm mm mm mm mm mm mm VS124 600 1200 856 925 360 565 400 880 345 615 460 VS126 600 1800 856 1130 660 840 525 1250 505 1055 600 VS128 600 2400 856 1720 660 840 525 1640 505 1160 600 VS136 900 1800 1200 1130 660 840 525 1250 505 1055 600 VS138 900 2400 1200 1720 660 840 525 1640 505 1160 600 VS146 1200 1800 1500 1130 660 840 525 1250 505 1055 600 VS148 1200 2400 1500 1720 660 840 525 1640 505 1160 600 VS1410 1200 3000 1500 2390 575 1080 630 2208 550 1450 670 VS1412 1200 3600 1500 2970 575 1165 630 2835 550 1640 670 VS1510 1500 3000 1800 2390 575 1080 630 2280 550 1450 670 VS1512 1500 3600 1800 2970 575 1165 630 2835 550 1640 670 VS1514 1500 4200 1800 3265 575 1205 630 2115 550 1735 670 VS1610 1800 3000 2100 2390 575 1080 630 2280 550 1450 670 VS1612 1800 3600 2100 2970 575 1165 630 2835 550 1640 670 VS1614 1800 4200 2100 3265 575 1205 630 3115 550 1735 670 VS1616 1800 4800 2100 3855 575 1310 630 3680 550 1930 670 Please note: These dimensions are derived from equipment designed for a specific application and are a guide only. Syntechtron can design screen equipment to any size, to suit any application in any environment. Vibrating Screens are fitted with one out-of-balance motor to suit the application Above data is based on 415 Volt 50 Hz supply, however units can be supplied for 460V/240V/220V/110V 50Hz/60Hz service. Units can be provided with special features for specific process or site requirements such as: Alternative motor voltage and protection Special mounting arrangements Special screen dressings Inlet / Outlet wear liners Full stainless steel or galvanised frames Multiple Screen Decks Support Frames Outlet chutes Dust sealing Inlet Chutes Spray bars Covers Dual Screen Decks Wash Boxes Ball Decks Special Paints and Finishes Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. VSF10
RVF Dual Rotary Vibratory Feeders This range of Syntechtron RVF Model Feeders incorporates rotary vibratory motors generally mounted on each side of the feeder trough as to provide maximum effect near the centre of mass of the feeder. This results in more even front and rear support loads which improves control, and allows for easy access for operators to make adjustments and perform maintenance. The construction of RVF feeders results in a simple, strong economical machine. Correct selection of the feeder models to suit specific applications is assisted by utilizing Syntechtrons unique computer design program which ensures all construction is in line with acceptable stresses and that the unit is suitable for a specified duty and installation requirements. Syntechtron RVF Feeders are available in a variety of sizes to meet specified duty requirements. All feeders are backed by Syntechtron, the Australian Vibratory experts with over 40 years experience in providing first class vibratory feeders. For special requirements feeders can be provided with extra features or auxiliary units to meet the most demanding applications such as:- Grizzly/Screening Sections Variable rate controllers Suspension or Base Mounted arrangements Safety Slings and Beams Inlet and Discharge Chutes Support Frames Hopper Outlets Finite Element Analysis Dust Sealing Covers Please contact Syntechtron to speak with our highly experienced sales engineers for assistance in selecting the correct vibratory feeder to meet your specifications. Picture: Base Mounted RVF1423 (Pan size 1400mm wide x 2300mm long)
RVF Dual Rotary Vibratory Feeders Model A B C D E F G H J Cap* RVF0514 500 1400 100 1190 190 900 990 1366 756 160 RVF0615 600 1500 125 1287 190 1000 1088 1482 813 210 RVF0630 600 3000 150 2775 190 1080 1168 2223 1002 200 RVF0712 750 1200 150 990 190 1150 1238 1296 787 200 RVF0715 750 1500 150 1290 190 1150 1318 1536 880 300 RVF1015 1000 1500 150 1190 240 1480 1570 1530 880 375 RVF1018 1000 1800 150 1485 240 1480 1570 1785 972 400 RVF1020 1000 2000 150 1733 240 1480 1570 1785 950 500 RVF1040 1000 4000 200 3715 240 1600 1687 2775 1175 500 RVF1216 1200 1600 150 1287 240 1680 1768 1630 940 500 RVF1218 1200 1800 150 1485 240 1680 1768 1720 950 550 RVF1220 1200 2000 200 1683 240 1680 1887 1870 1005 600 RVF1518 1500 1800 200 1485 240 2100 2187 1940 1090 700 RVF1520 1500 2000 200 1683 240 2100 2187 2030 1106 800 RVF1524 1500 2400 200 2080 240 2100 2207 2015 1120 950 RVF1540 1500 4000 250 3714 240 2180 2322 3056 1470 800 RVF1621 1600 2100 200 1782 240 2200 2311 2140 1200 900 RVF1625 1600 2500 200 2180 240 2200 2311 2350 1260 1000 RVF1823 1800 2300 200 2080 240 2400 2510 2126 1190 1200 RVF1827 1800 2700 250 2377 240 2400 2622 2375 1287 1350 RVF2025 2000 2500 300 2180 240 2680 2818 2314 1335 1350 RVF2030 2000 3000 250 2675 240 2680 2822 1768 1476 1500 RVF2224 2200 2400 250 2080 240 2880 3022 2524 1447 1450 RVF2228 2200 2800 250 2476 240 2880 3141 2762 1508 1700 RVF2230 2200 3000 300 2674 240 2880 3141 2856 1572 1850 RVF2232 2200 3200 300 2872 240 2880 3141 2945 1588 1900 RVF2536 2500 3600 300 3119 380 2990 3445 3255 1706 2500 The above feeder data is based on 415 Volt 50 Hertz Supply. * Nominal feed rate based on free flowing coal with trough at 8 down slope, running at maximum permissible stroke and when correctly installed under a Syntechtron approved hopper outlet Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. RVFC10
Model MF Heavy-Duty Electromechanical Vibratory Feeders The High Capacity Performers Syntechtron MF heavy-duty electromechanical feeders are the heavy-weights of bulk material handling and are used for higher capacity requirements. The seven heavy-duty models available are capable of capacities of up to 6000 TPH. Maximum feed rates range from up to 0.4m/sec (80ft/min) depending on material characteristics and the trough down-slope angle. Like RF medium density units, MF heavy-duty electromechanical feeders are two-mass, spring-connected and sub-resonant tuned. The exciter unit is connected to the trough with specially designed polymer compression springs. Exciters in these heavy-duty feeders use spherical roller bearings, with life expectancies up to 140,000 hours. Fixed Feed Rate These machines can be supplied without a controller where variable feed rate is not required. Trough stroke can be set by counterweight adjustment during commissioning to achieve the required feed rate. Variable Rate Controller Syntechtron have a range of Variable Rate Controllers utilising Mechanical Feeder Control Modules and other auxiliary components providing optional Local / Remote, Start / Stop, Manual Rate Set and Auto 4-20mA control. SYNTECHTRON can also supply frequency inverters to control the motor speed. These inverters can be supplied on a prewired panel plate or housed in an IP-55 steel enclosure complete with the necessary fuses, switches and contactors etc. Feeder troughs can be fitted with a range of wear liner materials such as, abrasion resistant steel, rubber, carbide composite (dua plate), stainless steel or heated liners. Trough clads with stainless steel (plug and seal welded to trough) are often used in coal applications where high moisture contents can result in corrosive environments.
MF Heavy-Duty Electromechanical Vibratory Feeders MF200 Dimensions in mm Trough Size A B C D E F G H J K L M N P Q R S T 900 x 3000 900 3000 190 1530 200 330 2250 240 2820 460 355 1370 1140 75 760 990 550 480 1000 x 2100 1000 2100 115 1530 200 175 1730 310 2215 560 200 760 1240 75 760 925 550 480 1200 x 1800 1200 1800 160 1530 200 75 1600 385 1060 585 100 610 1440 75 760 900 550 480 1200 x 2100 1200 2100 115 1530 200 175 1730 310 2215 560 200 760 1440 75 760 925 550 480 MF400 Dimensions in mm Trough Size A B C D E F G H J K L M N P Q R S T 1000 x 3000 1000 3000 12 1875 200 425 2235 355 3015 585 455 1220 1240 100 965 1190 635 550 1200 x 3600 1200 3600 130 1875 200 570 2780 120 3470 580 605 1675 1440 100 965 1215 635 550 1500 x 2100 1500 2100 420 1875 200 210 1750 560 2520 750 230 710 1740 150 965 1120 635 550 1500 x 2400 1500 1400 265 1875 200 350 1830 495 2675 725 380 865 1740 125 965 1145 635 550 MF600 Dimensions in mm Trough Size A B C D E F G H J K L M N P Q R S T 1500 x 3600 1500 3600 5 2030 200 840 2500 260 3600 675 865 1625 1745 150 1145 1310 845 845 1700 x 2300 1700 2300 510 2030 200 355 1675 730 2760 785 380 840 1950 150 1145 1185 845 845 1800 x 2400 1800 2400 540 2070 200 355 1875 710 2940 805 380 715 2050 150 1145 1230 845 845 1800 x 3000 1800 3000 300 2030 200 535 2100 665 3300 725 365 1320 2050 150 1145 1255 845 845 MF800 Dimensions in mm Trough Size A B C D E F G H J K L M N P Q R S T 1400 x 4500 1400 4500 420 2120 255 870 3300 90 4260 625 900 2030 1675 125 1245 1420 845 845 1800 x 3600 1800 3600 30 2120 255 350 2675 630 3655 705 380 1575 1975 150 1245 1340 845 845 2000 x 3400 2000 3400 180 2120 255 350 2755 380 3485 735 380 1420 2275 150 1245 1315 845 845 2100 x 2700 2100 2700 635 2285 255 415 2100 820 3335 840 450 1120 2375 180 1245 1320 845 845 MF1000 Dimensions in mm Trough Size A B C D E F G H J K L M N P Q R S T 1200 x 6000 1200 6000 890 2310 255 990 4240 120 5350 545 1015 2895 1455 150 1425 1605 845 845 1800 x 4000 1800 4000 275 2375 255 430 2955 795 5180 735 460 1880 2075 150 1425 1425 845 845 2100 x 3000 2100 3000 620 2375 255 485 2350 810 3645 840 510 1320 2375 180 1425 1370 845 845 2400 x 3000 2400 3000 620 2375 255 485 2350 790 3625 840 510 1320 2675 205 1425 1370 845 845 Model MF1600 and MF2000: Additional information available upon request. Exciter units can be driven through Cardan shaft drive arrangements if required. All dimensions are in mm and should be certified for installation purposes. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. Model Feeder Motor Standard Maximum capacity Mass Power Trough Size Coal Sand MF200 900 kg 4 kw 1200 x 1800 700 TPH 1200 TPH MF400 1800 kg 7.5 kw 1500 x 2100 1200 TPH 2000 TPH MF600 2700 kg 11 kw 1800 x 2400 1550 TPH 2600 TPH MF800 3600 kg 18.5 kw 2100 x 2700 1900 TPH 3200 TPH MF1000 4500 kg 22 kw 2400 x 3000 2400 TPH 4000 TPH MF1600 7300 kg 30 kw 2700 x 3300 3000 TPH 5000 TPH MF2000 9000 kg 37 kw 3000 x 3600 3600 TPH 6000 TPH MFE10
Vibratory Conveyors For moving bulk materials over extended distances Syntechtron is able offer both electromagnetic, mechanical and rotary vibrator driven conveyors and tube feeders Troughs can be supplied in many configurations. Long tubular troughs allow for clean materials to be conveyed with out atmospheric contamination. Poisonous, dusty materials can be conveyed without danger to personnel. Hot materials can be conveyed without the danger of burning belts reducing maintenance concerns. Syntechtron Vibratory Conveyors and Tube Feeders are used in many industries including; Minerals, Chemical, Pharmaceutical, Cullet, Plastics, Food Processing etc. MAGNET OR MOTOR DRIVES MULTI-MAGNET DRIVE OUT-OF-BALANCE MOTOR DRIVE Syntechtron can design and manufacture Vibrating Conveyors and Tube Feeders to suit the application, complete with optional extras such as inlet/outlet spouts, top covers, liners, screening sections, inspection ports, suitable for cable or floor suspension. Single and Multi Electro-magnetic Drives. Single and Two Out-of-Balance Motor Drives. Syntron Coilmount and Fleximount Drives. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. VCC10
Vibra-Flo Bin Dischargers The Syntechtron Vibra-Flo Bin Discharger attaches to the underside of storage bins and silos ensuring that stored product or material flow smoothly and accurately when discharged. Solve Bin Flow Problems Rat-holing occurs when a product does not naturally flow to the central flow stream forming a core. The result is changing densities, flow stoppages or unpredictable rates of product flow. Bridging occurs when the material compacts on itself allowing the material to form an arch in the hopper or bin. The result jams the hopper or bin slowing or even stopping product flow. The Vibra-Flo Bin Discharger can be supplied as a stand alone unit, or as a total materials handling package incorporating one of the many Syntechtron Electromagnetic or Electromechanical Vibrating Feeders or Conveyors. Our standard sizes Bin Diameters 500mm, 1000mm, 1500mm, & 2000mm will suit most applications A Vibra-Flo VB1500 with a FH22 Syntron Feeder Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. VFBDC10
Stockpile Reclaimer High Reclaim Capacity Low Maintenance Blending Capabilities Low Noise Robust Welded Construction Simple Installation Cost Efficient Space Efficient Reclaim facilities and operators today require a high tonnage reclaim rate from their stockpiles. This is often coupled with the need to blend various grades of material to produce an in specification product that can be easily varied to suit changing customer requirements. Syntechtrons vibratory stockpile reclaimer is designed to meet these requirements, offering effective reclaim of bulk solids, whilst overcoming traditional problems such as bridging and rat-holing. Based on technology proven over 40 years, these units enable the successful reclaiming and blending of bulk solids materials in applications including ship loading installations, power stations, ROM stockpiles and train loading facilities Picture: Syntechtron Model SR2512 Stockpile Reclaimer
Stockpile Reclaimer MODEL SR2500 SRT2500 SR3500 SRT3500 Diameter 2500 mm 2500 mm 3500 mm 3500 mm Motors 1 x 18.5kW 2 x 4KW 1 x 37kW 2 x 10.8kW Capacity 200 5500 TPH 200 5500 TPH 400 7000 TPH 400 7000 TPH Weight 3400 kg 3300 kg 6200 kg 6550 kg Inlet Diameter 2500 mm 2500 mm 3500 mm 3500 mm Outlet Diameter 600 mm /1300 mm 600 mm /1300 mm 800 mm /1450 mm 800 mm /1450 mm Below: Syntechtron Stockpile Reclaimer and patented Flow Control Gate. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. SRC10
Electromagnetic Vibrating Tables Electromagnetic Vibrating Tables Syntron Vibrating Tables are designed to settle and compact dry bulk materials in various types of containers. Their application provides either a sizable increase in the net weight of the container or a reduction in the container size with subsequent savings in shipping and storage space. Syntron Electromagnetic Vibrating Tables are the most versatile and widely used Vibrating Tables in our line. The high-speed (3000 vpm) of these tables, coupled with a controlled low-amplitude that does not exceed 1.6mm linear vibration, produces a gentle settling action. Through that action the co-efficient of friction of the material is reduced. As the particles settle, the entrapped air is more readily removed. The amplitude of the vibration can be regulated to suit the characteristics of the material being handled. The rate to control this is built into Models J-1 and J-50. These units are used primarily for laboratory and light duty packing applications. On the Models VP-51 through VP-500, the control is part of a separate control box. This allows remote control, when desirable. Models VP-51 through VP-500 are heavy-duty industrial units, designed with sturdy steel framework and decks. Electromagnetic vibrating tables may also be used for laboratory testing purposes. Models J-50 and J-1 flat deck jogger units are perfect for conducting electrical and mechanical pack tests and for life tests of components. Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. VTE10
Vibra Clean Scrapings Conveyor The use of conveyor belt scrapers is a widely accepted method of removing material from belts, to prolong belt life and maintain belt tracking. Little thought is given to where this material ends up after it has been removed from the belt, until the build up needs to be removed which is often expensive, difficult and unsafe. The Syntechtron Vibra-Clean scrapings conveyor solves this problem, mounting under the transfer point between conveyor s and other process stations, spilled material is directed on towards the original destination. Units come with their own isolation rubbers and transmit minimal vibrations to supporting structures. The unique dish design ensures the product is always directed to the main product flow stream. Benefits Include: Reduced downtime for cleaning Cleaner & safer process areas Cost effective Easy installation or retrofitting Reduced spillages and product loss MODEL RVC1012 RVC1112 RVC1215 RVC1315 W x L 1000 x 1200 1100 x 1200 1200 x 1500 1300 x 1500 Mass 150 kg 160 kg 190 kg 210 kg Motor 0.6 kw 0.6 kw 0.6 kw 0.6 kw Units are supplied standard with a bolt in non-stick Tivar wear surface; however other wear liner materials are available upon request Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. VCSCE10
Syntron Jogger Models Jogger Models Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. JME10
Syntron Parts Feeders offer many years of powerful, versatile and dependable service. A diverse range of drive unit sizes are available. The appropriate sized drive is selected to suit a specially designed Trough, commonly referred to as a Bowl. The Drive is then tuned to match the particular Bowl. These units employ a vibratory action which results in the parts travelling around the bowl surface an a circular direction. The bowls are designed to orientate the parts fed making these units ideal for use in packaging applications. The Controller is selected based on the size of the Drive Unit, voltage, current draw, and any other special requirements. To ensure correct operation, all Electromagnetic Vibratory Parts Feeders must be mounted on a substantial support structure. Electromagnetic Parts Feeders Due to our policy of continuous improvement in product design and manufacture we reserve the right to change specifications and dimensions without notice. For correct and safe operation Syntechtron process equipment must be installed, operated and maintained in accordance with our instruction manual. PFE10