314
315 XOOCOVE IP40 The optimum lighting solution with special mounting accessories for a wide range of cove applications
316 XOOCOVE IP40 The convenient system to master cove applications XOOCOVE approaches cove lighting in a revolutionary way. A turn-key solution with a 360 adjustable fixture. Its different optics guarantee perfect beam angle adjustment for all cove configurations. Even tiny cove dimensions with very limited space for lighting integration can be addressed by XOOCOVE with 20 mm (0.79") diameter and minimum space requirement using the clip as mounting option. The cabling concept is tailored for real life installation situations, in which the installer needs to decide about feed-in positions and cabling strategies on site. The 200 VA main supply line can be wiretapped at any position thanks to an easy to handle piercing connector. For example, using the HYDRA LD5 (approx. 600 lm/m / 183 lm/ft) as light engine, up to 80 m (262') XOOCOVE can be tapped to the supply line using only one power supply feeding 24 V from the middle. XOOCOVE is equipped with the reliable and robust HYDRA LD tape family as light source, providing excellent lifetime (L90/B10 > 60.000 h) and long term CCT stability. XOOCOVE is available in six standard lengths from 260 mm (10.23") to 2,510 mm (8.23') to be configured with four lumen packages from 300 lm/m (91 lm/ft) up to 3,200 lm/m (975 lm/ft) and the diffuse cover or 60 lens for optimal light control in all common cove applications.
317 Slim profile with 20 mm (0.79") diameter, allows for 360 adjustment of the light emission inside the cove for optimal illumination results. 24 V Supply line with 0.75 mm² (AWG18) ensures long run lengths with only one electrical feed-in. Easy to handle piercing connectors allow for maximum flexibility at the site. Tool-free installation in the cove by using silicone pads that only have to be placed inside the cove structure. Linear LED cove lighting system Cross section Length Power Luminous flux Efficacy Beam angle/optics Color temperature/color CRI 20 mm 0.79" diameter up to 2,510 mm 8.23' 5 W/m 25 W/m 1.5 W/ft 7.6 W/ft up to 3,240 lm/m 987 lm/ft up to 133 lm/w 60 or 120 2,000 K 5,000K 85 95
318 Photo: Sander Baks
319 XOOCOVE IP40 Voltage (V) CRI Lumen/W (lm/w) Watt/m / Watt/ft (W/m / W/ft) Lumen/m A / Lumen/ft A (lm/m / lm/ft) max. serial run length (m / ft) Page XOOCOVE HYDRA White IP40 LD5 24 95 124 5 / 1.5 620 / 189 40 / 131.2 320 LD10 24 85 125 10 / 3 1,250 / 381 20 / 65.6 LD15 24 85 133 15 / 4.6 1,990 / 607 12.5 / 41 LD25 24 85 130 25 / 7.6 3,240 / 988 7.6 / 24.9 A @W850. At warmer light colors the luminous flux is reduced.
320 XOOCOVE HYDRA White IP40 Linear 24 V LED luminaire as systems solution especially for the installation in coves. No tools needed for a quick and convenient commissioning enabled by innovative mounting pads or clips with integrated cable routing. Each fixture is connected to a 24 V main supply line (max. 8 A, 190 W) with special piercing connectors. Therefore, luminaire lines with up to 40 m total length are possible. XOOCOVE is available in six standard lengths from 260 mm (0.85") to 2,510 mm (8.23") to be configured with four lumen packages and the diffuse cover or 60 lens. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear Tj Away thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 16.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guaran- tees an outstanding lifetime of > 60,000 hrs L90/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of 95 and TM-30-15 up to R f = 91 / R g = 100 ensuring a remarkable light quality. Consistent light intensity all along the luminaire length is obtained thanks to active current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic discharge ± 2,000 V and polarity miswiring. Fully PWM dimmable for frequency > 0 Hz up to 2 khz (flicker free for frequency higher then 1.2 khz according to IEEE P1789 standard). Engineered and produced in Germany. Dimensions & available lengths ø 20 mm / 0.79" 13.1 mm / 0.52" 31 mm / 1.22" 31 mm / 1.22" 52 mm / 2.05" 37.5 mm / 1.48" ø 20 mm / 0.79" A ( 5 : 1 ) + VarioClip XOOCOVE Silicon mount 50 mm / 1.97" + A - Electrical & output data Voltage 24 Volt (23 V min, 25 V max) Temperature B Tc min = -25 C / -13 F, Tc max = 70 C / 158 F Storage temperature Ts min = -30 C / -22 F, Ts max = 85 C / 185 F Ambient temperature Ta min = -25 C / -13 F, Ta max = 45 C / 113 F CRI / R9 up to 95 / up to 65 XOOCOVE HYDRA LD5 LD10 LD15 LD25 Power (W/m / W/ft) A 5 / 1.5 10 / 3.1 15 / 4.6 25 / 7.6 Efficacy (lm/w) A @ W850 124 125 133 130 max. run length with one elec. feed-in (m / ft) 40 / 131.2 20 / 65.6 12.5 / 41 7.6 / 24.9 LD5 LD10 LD15 LD25 Color temperature lumen/meter (lm/m) A lumen/feet (lm/ft) A @ 60 Lens C W820 2,000 K 360 / 109 720 / 218 1,160 / 353 1,880 / 572 W822 2,200 K 410 / 124 830 / 252 1,320 / 401 2,150 / 654 W825 2,500 K 470 / 142 940 / 286 1,510 / 459 2,450 / 746 W827 W927 2,700 K 420 / 127 1,000 / 304 1,600 / 487 2,600 / 791 W830 W930 3,000 K 430 / 130 1,060 / 322 1,700 / 517 2,760 / 840 W835 W935 3,500 K 440 / 133 1,120 / 340 1,780 / 542 2,900 / 883 W840 W940 4,000 K 450 / 136 1,140 / 346 1,820 / 554 2,960 / 901 W850 5,000 K 620 / 188 1,250 / 380 1,990 / 606 3,240 / 987 A The given data are typical values. Due to tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%. B The Tc-point should be measured in thermal equilibrium according to IEC EN 60598-1. C Sample values.! Note: 40% luminous flux at opal and 25% with diffuse cover. L90/B10 > 60.000 h Wxxx/ 339 LM 79 LM 80 Lifetime Photometric code LM 79 compliant LM 80 compliant Protection against granular objects > 1 mm / 0.034" Tool free installation Edition: August 29, 2018 For actual data, further options and detailed information, please visit our website www.led-linear.com
321 Order code Your order code Order code example XOOCOVE HYDRA W IP40 XOOCOVE HYDRA LD5 W9 27 1260 DR IP40 Diffuse cover, round DIN 5040:A40 LED tape HYDRA LD5... LD5 HYDRA LD10... LD10 HYDRA LD15... LD15 HYDRA LD25... LD25 Color rendering > 80... 8 > 90 (only LD5)... 9 Color temperature 2,000 K... 20 2,200 K... 22 2,500 K... 25 2,700 K... 27 3,000 K... 30 3,500 K... 35 4,000 K... 40 5,000 K... 50 Length 260 mm (0.85')... 0260 635 mm (2.08')... 0635 1,010 mm (3.31')... 1010 1,260 mm(4.13')... 1260 1,510 mm (4.95')... 1510 2,510 mm (8.23')... 2510 Cover / Lens options Diffuse round cover... DR Linear lens 60 diffuse... 60D Ingress protection IP40... IP40 Linear lens, 60 DIN 5040:A60 Photo: Sander Baks Please choose your accessories Please choose accessories for 24 V cabling. Cabling VarioCon 8A Splitter IP20 (for connecting fixture to 24 V supply line) VarioCon 8 A Connector 2 x 0,75 mm 2, 1 m / 3.28' IP20 (for connection to 24 V PSU/driver) VarioCon 8A Extension 2 x 0,75 mm 2, 10 m / 32.8' IP20 (24 V supply line for fixtures) VarioCon 8A Extension 2 x 0,75 mm 2, 20 m / 65.6' IP20 (24 V supply line for fixtures) Art.-# 15000151 15000152 15000270 15000271 Recommended power supply Art.-# Power Supply Unit IP20 16000178 Recommended control unit Art.-# Control System White/IQ-White 16000268-DT6 VarioCon 8A Y junction parallel IP20 15000153 XOOCOVE Silicon mount (no tools needed) 13000226 VarioClip XOOCOVE 13000228-SCH For actual data, further options and detailed information, please visit our website www.led-linear.com Edition: August 29, 2018