US Catalog January Motor protection and control Manual motor starters, contactors and overload relays

US Catalog January 2017 Motor protection and control Manual motor starters, contactors and overload relays

Motor rated operational powers and currents The currents given below concern standard three-phase four-pole cage motors (1800 r.p.m. at 60 Hz 1500 r.p.m. at 50 Hz). These values are given for guidance and may vary according to the motor manufacturer and depending on the number of poles. UL / CSA Motor nominal current: standardized values (according to UL 60947-4-1A Annex G and UL 508 CSA C22.2 No.14) Motor power 120 V 240 V 208 V 220-240 V 80-415 V 440-480 V 550-600 V 1-ph 1-ph, -ph -ph -ph -ph -ph -ph hp A A A A A A A 1/10 1.5 1/8.8 1.9 1/6 4.4 2.2 1/4 5.8 2.9 1/ 7.2.6 1/2 9.8 4.9 2.4 2.2 1. 1.1 0.9 /4 1.8 6.9.5.2 1.8 1.6 1. 1 16 8 4.6 4.2 2. 2.1 1.7 1-1/2 20 10 6.6 6. 2.4 2 24 12 7.5 6.8 4..4 2.7 4 17 10.6 9.6 6.1 4.8.9 5 56 28 16.7 15.2 9.7 7.6 6.1 7-1/2 80 40 24.2 22 14 11 9 10 100 50 0.8 28 18 14 11 15 15 68 46.2 42 27 21 17 20 88 59.4 54 4 27 22 25 110 74.8 68 44 4 27 0 16 88 80 51 40 2 40 176 114 104 66 52 41 50 216 14 10 8 65 52 60 169 154 10 77 62 75 211 192 128 96 77 100 27 248 165 124 99 125 4 12 208 156 125 150 96 60 240 180 144 200 528 480 20 240 192 250 604 40 02 242 00 722 482 61 289 50 828 560 414 6 400 954 66 477 82 450 100 515 412 500 1180 786 590 472 IEC Motor nominal current: standardized values in blue (according to IEC 60947-4-1 Annex G) Motor power 220 V 20 V 240 V 80 V 400 V 415 V 440 V 500 V 660 V 690 V kw A A A A A A A A A A 0.06 0.7 0.5 0.4 0.21 0.2 0.19 0.18 0.16 0.1 0.12 0.09 0.54 0.52 0.50 0.2 0. 0.29 0.26 0.24 0.18 0.17 0.12 0.7 0.7 0.67 0.46 0.44 0.42 0.9 0.2 0.24 0.2 0.18 1 1 1 0.6 0.6 0.58 0.5 0.48 0.7 0.5 0.25 1.6 1.5 1.4 0.9 0.85 0.82 0.74 0.68 0.51 0.49 0.7 2.0 1.9 1.8 1.2 1.1 1.1 1 0.88 0.67 0.64 0.55 2.7 2.6 2.5 1.6 1.5 1.4 1. 1.2 0.91 0.87 0.75.5..2 2.0 1.9 1.8 1.7 1.5 1.15 1.1 1.1 4.9 4.7 4.5 2.8 2.7 2.6 2.4 2.2 1.7 1.6 1.5 6.6 6. 6.8.6.5.2 2.9 2.2 2.1 2.2 8.9 8.5 8.1 5.2 4.9 4.7 4..9 2.9 2.8 11.8 11. 10.8 6.8 6.5 6. 5.7 5.2 4.8 4 15.7 15 14.4 8.9 8.5 8.2 7.4 6.8 5.1 4.9 5.5 20.9 20 19.2 12.1 11.5 11.1 10.1 9.2 7 6.7 7.5 28.2 27 25.9 16. 15.5 14.9 1.6 12.4 9. 8.9 11 9.7 8 6.4 2.2 22 21.2 19. 17.6 1.4 12.8 15 5. 51 48.9 0.5 29 28 25.4 2 17.8 17 18.5 6.8 61 58.5 6.8 5.7 0.7 28 22 21 22 75. 72 69 4.2 41 9.5 5.9 25.1 24 0 100 96 92 57.9 55 5 48.2 44.5 2 7 120 115 110 69 66 64 58 5 40.8 9 45 146 140 14 84 80 77 70 64 49.1 47 55 177 169 162 102 97 9 85 78 59.6 57 75 240 20 220 19 12 127 116 106 81 77 90 291 278 266 168 160 154 140 128 97 9 110 55 40 26 205 195 188 171 156 118 11 12 418 400 8 242 20 222 202 184 140 14 160 509 487 467 295 280 270 245 224 169 162 200 67 609 584 68 50 7 07 280 212 20 250 782 748 717 45 40 414 77 44 261 250 15 98 940 901 568 540 520 47 42 27 1 55 1109 1061 1017 642 610 588 55 488 70 54 400 1255 1200 1150 726 690 665 605 552 418 400 500 1545 1478 1416 895 850 819 745 680 515 49 560 1727 1652 158 1000 950 916 82 760 576 551 60 1928 1844 1767 1116 1060 1022 929 848 64 615 710 2164 2070 1984 125 1190 1147 104 952 721 690 800 2446 240 224 1417 146 1297 1179 1076 815 780 900 2760 2640 250 1598 1518 146 10 1214 920 880 1000 042 2910 2789 1761 167 161 1466 19 1014 970

Motor protection and control Manual motor starters, contactors and overload relays Overview 1 Manual motor starters 2 Mini contactors AF, EK contactors and NF contactor relays 4 Overload relays 5 DRAF 6 Bar contactors 7 Certifications and approvals General technical data 8 Index 9 Marketing material 10 US Catalog Motor Protection and Control 1/1

-pole contactors Mini contactors Contactors for motor control and 1 IEC 1) AC- Rated operational power θ 60 C 2), 400 V kw 4 5.5 4 5.5 7.5 11 15 18.5 18.5 22 0 7 45 UL/CSA -phase motor rating 480 V hp 5 5 7.5 10 15 20 25 0 40 50 60 60 AC / DC Control supply Type AF09 AF12 AF16 AF26 AF0 AF8 AF40 AF52 AF65 AF80 AF96 AC Control supply Type B6 B7 AF09 AF12 AF16 AF26 AF0 AF8 AF40 AF52 AF65 AF80 AF96 DC Control supply Type BC6 BC7 AF09 AF12 AF16 AF26 AF0 AF8 AF40 AF52 AF65 AF80 AF96 IEC AC- Rated operational current θ 60 C 2), 400 V A 8.5 11.5 9 12 18 26 2 8 40 5 65 80 96 AC-1 Rated operational current θ 40 C, 690 V A 20 (400 V) 20 (400 V) 25 28 0 45 50 50 70 100 105 125 10 UL/CSA General use rating 600 V A 12 (00 V) 16 25 28 0 45 50 50 60 80 90 105 115 NEMA NEMA Size 00 0 1 2 1) 1000 V IEC ratings available for AF80, AF96 and AF146 AF2650 contactors. 2) θ 55 C for mini contactors and AF400... AF2650 contactors. Main accessories Auxiliary contact blocks Front mounting CAF6 CA4-10 (1 x N.O.) CA4-01 (1 x N.C.) Side mounting CA6 CAL4-11 (1 x N.O. + 1 x N.C.) Timers Electronic TEF4-ON TEF4-OFF Interlocking units ) Mechanical VM4 VM96-4 Mechanical / Electrical VEM4 Connection sets For reversing contactors BSM6-0 BER16-4 BER8-4 BER65-4 BER96-4 Surge suppressors Varistor (AC/DC) RV-BC6 Built-in surge protection RC type (AC) Transil diode (DC) RD7 ) See available reversing contactors VB6, VB7 and VAS09... VAS16. Overload relays Thermal relays Class 10 (Class 10A for TF140, TA200DU) T16 (0.10 16 A) TF42 (0.10 8 A) TF65 (22...67 A) TF96 (40...96 A) Electronic relays Class 10E, 20E, 0E E16DU (0.10 18.9 A) EF19 (0.10 18.9 A) EF19 (0.10 18.9 A) EF45 (9 45 A) Manual motor starters Thermal / magnetic protection Class 10 MS116 (0.10 2 A) Ics up to 50 ka for class 10A MS116 (0.10...2 A) lcs up to 50 ka for class 10A EF65 (20...70 A) EF96 (6...100 A) MS165 4) (10...65 A) lcs up to 100 ka MS5100 (40 100 A) Ics up to 50 ka MS12 (0.10 2 A) Ics up to 100 ka MS12 (0.10...2 A) lcs up to 100 ka Magnetic only types MO12 (0.16...2A) MO12 (0.16...2 A) Ics up to 100 ka MS497 (22 100 A) Ics up to 100 ka MO165 4) (16...65 A) lcs up to 100 ka MO496 (2 100 A) Ics up to 100 ka Accessories For contactor mounting BEA7/12 BEA16-4 BEA8-4 BEA65-4 5) 4) MS165/MO165 are suitable for use with AF09... AF0 for North american applications. 5) BEA65-4 suitable for MS165 and MO165 only. MS495 (45 100 A) Ics up to 50 ka MO5100 (70 100 A) Ics up to 6 ka MO495 (6 100 A) Ics up to 50 ka 1/2 Motor Protection and Control US Catalog

power switching 1 55 75 75 90 110 12 160 200 200 250 15 400 475 560 75 100 100 125 150 200 250 00 50 400 500 600 800 900 AF116 AF140 AF146 AF190 AF205 AF265 AF05 AF70 AF400 AF460 AF580 AF750 AF1250 AF150 AF1650 AF2050 AF2650 AF116 AF140 AF146 AF190 AF205 AF265 AF05 AF70 AF400 AF460 AF580 AF750 AF1250 AF150 AF1650 AF2050 AF2650 AF116 AF140 AF146 AF190 AF205 AF265 AF05 AF70 AF400 AF460 AF580 AF750 AF1250 AF150 AF1650 AF2050 AF2650 116 140 146 190 205 265 05 70 400 460 580 750 860 1060 160 200 225 275 50 400 500 600 600 700 800 1050 1260 150 1650 2050 2650 160 200 200 250 00 50 400 520 550 650 750 900 1210 150 1650 2100 2700 4 5 6 7 8 CAL19-11 (1 x N.O. + 1 x N.C.) CAL18-11 (1 x N.O. + 1 x N.C.) VM19 (for same size contactors) VM750H VM750V VM1650H BER140-4 BER205-4 BER70-4 BEM460-0 BEM750-0 TF140DU (66...142 A) θ 55 C EF146 (54...150 A) TA200DU 66...200 A) θ 55 C EF205 (6...210 A) Short-circuit protection devices MCCB and switch-fuses EF70 (115...80 A) EF460 (150 500 A) EF750 (250 800 A) E1250DU (75 1250 A) US Catalog Motor Protection and Control 1/

4-pole contactors Mini contactors 1 IEC AC-1 Rated operational current θ 40 C, 690 V A 16 20 UL/CSA General use rating 600 V A 12 (00 V) 16 AC / DC Control supply Type AC Control supply Type B6 B7 DC Control supply Type BC6 BC7 Contactor relays Mini contactor relays IEC AC-15 Rated operational current 400 V A UL/CSA Pilot duty A600 2 2 1 4 0 AC Control supply Type K6-22Z K6-1Z K6-40E DC Control supply Type KC6-22Z KC6-1Z KC6-40E AC / DC Control supply Type Bar contactors DC Circuit switching DC-1 Rated current up to 5000 A DC-/DC-5 Rated current up to 2000 A 1500 V with poles in series IOR.. 6-..-CC to IOR.. 5100-..-CC Specific contactors DC Circuit switching 100 A, 440 V, DC-1 GA75, GAE75 types 275 to 2050 A, 1000 V, DC-1 GAF185 to GAF2050 types 1/4 Motor Protection and Control US Catalog

Contactors 1 25 0 45 55 70 100 125 160 200 275 50 400 500 525 800 1000 25 0 45 55 60 80 105 160 175 20 250 00 50 420 540 AF09 AF16 AF26 AF8 AF40 AF52 AF80 AF116 AF140 AF190 AF205 AF265 AF05 AF70 AF09 AF16 AF26 AF8 AF40 AF52 AF80 AF116 AF140 AF190 AF205 AF265 AF05 AF70 EK550 EK1000 AF09 AF16 AF26 AF8 AF40 AF52 AF80 AF116 AF140 AF190 AF205 AF265 AF05 AF70 EK550 EK1000 Contactor relays A600, Q600 2 2 1 4 0 NF22E NF1E NF40E NF22E NF1E NF40E NF22E NF1E NF40E AC Circuit switching Special versions AC-1 Rated current up to 5000 A AC- Rated power up to 1500 kw (1520 A - 440 V) IOR.. 6-..-MT to IOR.. 5100-..-MT AC/DC Coupling: LOR.. contactors Slip ring motor control: FOR.. contactors Field discharge: AM(F)-CC-JORE contactors AC/DC Switching (N.C./N.O. main poles): NOR & JOR contactors Latching contactors for energy saving and safety requirements: AMA or AME contactors Capacitor switching 12.5 to 80 kvar UA16..RA to UA110..RA types UA16 to UA110 types US Catalog Motor Protection and Control 1/5

Manual motor starters Overview Benefits 2/2 Features 2/ Overview 2/6 2 Ordering details 0.10 to 65 A with thermal and electromagnetic protection MS116 manual motor starters 2/8 MS12 manual motor starters 2/9 MS165 manual motor starters 2/10 Ordering details 0.16 to 65 A with electromagnetic protection MO12 manual motor starters magnetic only 2/11 MO165 manual motor starters magnetic only 2/12 Ordering details 0.10 to 25 A with thermal and electromagnetic protection MS12-T circuit breakers for transformer protection 2/1 Main accessories MS116, MS12, MS165 2/14 Technical data MS116, MS12, MS165, MO12, MO165, MS12-T 2/21 Ordering details 40 to 100 A with thermal and electromagnetic protection MS5100, MS495, MS497 manual motor starters 2/2 Technical data MS5100, MS495, MS497 2/ Ordering details 70 to 100 A with electromagnetic protection MO5100, MO495, MO496 2/7 Technical data MO5100, MO495, MO496 2/8 Main accessories MS/MO5100, MS/MO49X 2/42 General accessories 2/47 For direct product details information, use order code, ex : www.abb.com/productdetails/ms12-4.0 US Catalog Motor Protection and Control 2/1

MS and MO manual motor starters A complete motor protection concept 2 Fuseless protection saves costs, space and ensures a quick reaction under overload and short circuit condition by switching off the motor within milliseconds. The full range of motor starters offers protection from 0.1 A to up to 100 A. The new family range has a harmonized range of accessories and offers the same features up to 65 A. Safety and protection Protect equipment and people With its broad range of manual motor starters, ABB offers protection and safety in almost every situation including hazardous areas. Save people from electrical shocks and the installation from short-circuits, overloads and phase failures while also controlling the current flow through a simple and handy ON/ OFF switch. Continuous operation Secure uptime Fuseless motor protection reduces maintenance costs and downtimes by avoiding fuse replacement after faults. Furthermore, MS12 and MS165 feature a magnetic trip indicator making troubleshooting easier. Speed up your projects Simplified design This range can be connected easily with ABB contactors or soft starters using the respective accessory. Additionally, the main range of accessories is shared across multiple starters, making planning simpler. At the same time, you can rely on ABB s global technical support. 2/2 Motor Protection and Control US Catalog

Protection and control A full motor protection solution 2 An all-in-one solution ABB offers protection against short-circuits, phase failures and overload together with disconnecting functionality all in one single compact product. MS116 MS12/MO12 MS165/MO165 High performance in compact size The main range of motor starters can cover short-circuit breaking capacities up to 100 ka. Also, every motor starter is temperature compensated up to 60 C, making them more reliable. Troubleshooting made easy MS12 and MS165 feature a magnetic trip indicator. This way, every tripping event will be distinguished, making troubleshooting a lot easier and faster. Always an option The MS116 and MS12 offer protection up to 2 A and a short-circuit breaking capacity of 50 ka and 100 ka, respectively all in a 45 mm housing. They are designed for high performance in addition to their compact size. US Catalog Motor Protection and Control 2/

Control everywhere and anytime Tuned for your application 2 Short-circuit protection and disconnection Control Overload and phase failure protection Dedicated for short-circuit protection MO motor starters offer magnetic-only protection for the same range of operational currents as MS family and shared the same accessories range. These starters can be combined with a contactor and an overload relay in order to create a full motor protection solution. Transformer protection MS12-T is an inrush compensated circuit breaker for control transformer protection. With the right selection, it provides overcurrent protection on the primary side of the transformer. This avoids expensive protection on the secondary side. EAC BV France GL Germany LR Gr. Britain DNV Norway Rina RINa Italy ABS USA Protection wherever you are The manual motor starter range is worldwide applicable. With its wide range of certifications, it covers standards like IEC, culus, CCC, EAC and ship approvals. All manual motor starters also apply to ATEX standards and will protect your motors in hazardous areas. Ready for IE motors MS116/MS12/MO12 and MS/MO165 comply with the latest standards. They are "IE ready" and will protect the new generation of high efficiency motors. 2/4 Motor Protection and Control US Catalog

Accessories Easy add-ons, easier control HK1 MS12 MS12-T SK1 HK1 2 H CK1 MS165 AA1 HKF1 UA1 Busbar connectors and enclosures With busbar connectors, up to 5 manual motor starters can be fitted next to each other with optional spacing for auxiliary contacts. For easier access, enclosures or door handle kits are also available. Harmonized range of accessories All types up to 65 A share the same main accessories like auxiliary contacts, signal contacts, shunt trips and under-voltage releases. This significantly slims the part list and makes selection of the right accessories easy. Safety at work With a lockable handle maintenance will be safe for every technician. For MS12 and MS165 a lock can seal the handle without the use of an additional accessory. Easy to connect Save time wiring and avoid mistakes by using a connecting link between ABB manual motor starters and soft starters or contactors. This creates harmonious and compact starter combination that is easy to mount. US Catalog Motor Protection and Control 2/5

Manual motor starters Overview 2 Type MS116 MS12 MS165 MS5100 Thermal and electromagnetic protection Yes Yes Yes Yes Electromagnetic protection - - - - Phase loss sensitivity Yes Yes Yes Yes Switch position ON/OFF ON/OFF/TRIP ON/OFF/TRIP ON/OFF/TRIP Magnetic trip indication - Yes Yes - Lockable handle without accessories - Yes Yes Yes Disconnecting feature Yes Yes Yes Yes Width 45 mm 45 mm 55 mm 90 mm Rated operational current Ie 0.16... 2 A 0.16... 2 A 16... 65 A 100 A Setting range 0.1... 2 A 0.1... 2 A 10... 65 A 40... 100 A 2) Ambient air temperature -25... +55 C 1) -25... +60 C 1) -20... +60 C 1) -25... +70 C 1) Compensated 2) For motor loads only up to 80A Accessories Auxiliary contact HKF1, HK1 AUX Signalling contact for tripped alarm SK1 AUX SA for short-circuit alarm - CK1 - Shunt trip AA1 SOR-C Undervoltage release UA1 UVR-C Table for short-circuit ratings for 480 V Selection parameters Standard range MS116 Performance range MS12, MS165, MS5100 Rated operational power Setting range for thermal release Type SCCR group installation at 480V Type SCCR group installation at 480V HP @ 480 V 0.1 0.16 A MS116-0.16 0 ka MS12-0.16 65 ka 0.16 0.25 A MS116-0.25 0 ka MS12-0.25 65 ka 0.25 0.4 A MS116-0.4 0 ka MS12-0.4 65 ka 0.4 0.6 A MS116-0.6 0 ka MS12-0.6 65 ka 0.6 1.0 A MS116-1.0 0 ka MS12-1.0 65 ka /4 1.0 1.6 A MS116-1.6 0 ka MS12-1.6 65 ka 1 1.6 2.5 A MS116-2.5 0 ka MS12-2.5 65 ka 2 2.5 4.0 A MS116-4.0 18 ka MS12-4.0 65 ka 4.0 6. A MS116-6. 18 ka MS12-6. 65 ka 5 6. 10 A MS116-10 18 ka MS12-10 65 ka 7.5 8 12 A MS116-12 18 ka MS12-12 5 ka 10 10 16 A MS116-16 18 ka MS12-16 5 ka MS165-16 65 ka 10 14... 20 A MS165-20 65 ka 10 16 20 A MS116-20 18 ka MS12-20 5 ka 10 18 25 A MS165-25 65 ka 15 20 25 A MS116-25 18 ka MS12-25 5 ka 15 25 2 A MS116-2 18 ka MS12-2 5 ka 20 2... 2 A MS165-2 65 ka 20 0... 42 A MS165-42 65 ka 0 40... 54 A MS165-54 65 ka 40 40... 54 A MS165-54 65 ka 50 52... 65 A MS165-65 65 ka 75 40... 100 A MS5100-100 65 ka 100 40... 100 A MS5100-100 65 ka Type SCCR group installation at 480V 2/6 Motor Protection and Control US Catalog

MO12 MO165 MO5100 MS12-T - - - Yes Yes Yes Yes - - - - Yes ON/OFF/TRIP ON/OFF/TRIP ON/OFF/TRIP ON/OFF/TRIP - - - Yes Yes Yes Yes Yes Yes Yes Yes Yes 45 mm 55 mm 76.2 mm 45 mm 0.16... 2 A 16... 65 A 70... 100 A 0.16... 2 A - - - 0.1... 25 A -25... +60 C -25... +60 C -25... +70 C -25... +60 C 1) 2 HKF1, HK1 AUX HKF1 SK1 - SK1 - - CK1 AA1 SOR-C AA1 UA1 UVR-C UA1 Magnetic only MO12, MO165, MO5100 Transformer protection MS12-T Type SCCR group installation at 480V Type SCCR group installation at 480V Type SCCR group installation at 480V MO12-0.16 65 ka MS12-0.16T 65 ka MO12-0.25 65 ka MS12-0.25T 65 ka MO12-0.4 65 ka MS12-0.4T 65 ka MO12-0.6 65 ka MS12-0.6T 65 ka MO12-1.0 65 ka MS12-1.0T 65 ka MO12-1.6 65 ka MS12-1.6T 65 ka MO12-2.5 65 ka MS12-2.5T 65 ka MO12-4.0 65 ka MS12-4.0T 65 ka MO12-6. 65 ka MS12-6.T 65 ka MO12-10 65 ka MS12-10T 65 ka MO12-12 5 ka MS12-12T 0 ka MO12-16 5 ka MO165-16 65 ka MS12-16T 0 ka MO165-20 65 ka MO12-20 5 ka MS12-20T 0 ka MO12-25 5 ka MO165-25 65 ka MS12-25T 0 ka MO12-2 5 ka MO165-2 65 ka Transformer protection: The instantaneous short-circuit current setting MO165-42 65 ka is 20 times the rated operational current. MO165-54 65 ka MO5100-70 MO165-65 65 ka MO5100-80 MO5100-100 US Catalog Motor Protection and Control 2/7

MS116 manual motor starters 0.10 to 2 A with thermal and electromagnetic protection Description 2 MS116-16 MS116-25 2CDC241010F0011 2CDC241001F0011 MS116 is a compact and economic range for motor protection up to 25 HP (600 V) / 2 A in width of 45 mm. Additional features include the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory. These are suitable throughout the MS116/MS12/MS165-range. Ordering details Rated operational power Setting range Short-circuit current rating (SCCR), group installation at 480V AC 240 V 480 V 600 V Rate instantaneous short-circuit current setting l i Catalog number Global code HP HP HP A ka A kg 0.10... 0.16 0 2.00 MS116-0.16 1SAM250000R1001 0.2 0.16... 0.25 0.10 MS116-0.25 1SAM250000R1002 0.2 0.25... 0.40 0 5.00 MS116-0.4 1SAM250000R100 0.2 0.40... 0.6 0 7.90 MS116-0.6 1SAM250000R1004 0.2 1/2 0.6... 1.00 0 12.5 MS116-1.0 1SAM250000R1005 0.2 /4 /4 1.00... 1.60 0 20.0 MS116-1.6 1SAM250000R1006 0.27 1/2 1 1.5 1.60... 2.50 0 1. MS116-2.5 1SAM250000R1007 0.27 1 2 2.50... 4.00 18 50.0 MS116-4.0 1SAM250000R1008 0.27 1.5 5 4.00... 6.0 18 78.8 MS116-6. 1SAM250000R1009 0.27 5 7.5 6.0... 10.0 18 150 MS116-10 1SAM250000R1010 0.27 7.5 10 8.00... 12.0 18 180 MS116-12 1SAM250000R1012 0.27 5 10 10 10.0... 16.0 18 240 MS116-16 1SAM250000R1011 0.27 5 10 15 16.0... 20.0 18 00 MS116-20 1SAM250000R101 0.1 7.5 15 20 20.0... 25.0 18 75 MS116-25 1SAM250000R1014 0.1 10 20 25 25.0... 2.0 18 480 MS116-2 1SAM250000R1015 0.1 Weight (1 pc) Note: Manual motor starters should always be selected so that the actual motor current is within the setting range. Main dimensions mm, inches 1.5 0.06" 5.5 0.22" 80.1.15" 70 2.76" 4.5 1.71" 1.5 0.06" 5.5 0.22" 79.9.15" 69.8 2.75" 4. 1.7" 90.54" 1.7 0.07" 27.5 1.1" 75 2.95" 14 0.55" 14 0.55" 45 1.77" 5 1.8" 1.77" 45 2." 57.8 2CDC242002F0010 97.8.85" 1.7 0.07" 27.5 1.1" 75 2.95" 14 0.55" 14 0.55" 5 1.8" 1.77" 45 2." 57.8 2CDC242001F0011 MS116 16 A & MS116-HKF1-11 16 A 45 1.77" MS116 20 A & MS116-HKF1-11 20 A 2/8 Motor Protection and Control US Catalog

MS12 manual motor starters 0.10 to 2 A with thermal and electromagnetic protection Description MS12-10 MS12-2 1SBC10122F0010 2CDC241001F0011 MS12 is a compact and powerful range for motor protection up to 25 HP (600 V) / 2 A in width of 45 mm. This type has also a clear and reliable indication of fault in a separate window in the event of short-circuit tripping. Additional features include the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, power in-feed blocks are available as accessory. These are suitable throughout the MS116/ MS12/MS165-range. Ordering details Rated operational power 240 V 480 V 600 V Setting range Short-circuit current rating (SCCR), group installation at 480V AC Rated instantaneous short-circuit current setting l i Catalog number Global code HP HP HP A ka A kg 0.10 0.16 65 2.00 MS12-0.16 1SAM50000R1001 0.22 0.16 0.25 65.10 MS12-0.25 1SAM50000R1002 0.22 0.25 0.40 65 5.00 MS12-0.4 1SAM50000R100 0.22 0.40 0.6 65 7.90 MS12-0.6 1SAM50000R1004 0.22 1/2 0.6 1.00 65 12.5 MS12-1.0 1SAM50000R1005 0.22 /4 /4 1.00 1.60 65 20.0 MS12-1.6 1SAM50000R1006 0.27 1/2 1 1.5 1.60 2.50 65 1. MS12-2.5 1SAM50000R1007 0.27 1 2 2.50 4.00 65 50.0 MS12-4.0 1SAM50000R1008 0.27 1.5 5 4.00 6.0 65 78.8 MS12-6. 1SAM50000R1009 0.27 5 7.5 6.0 10.0 65 150 MS12-10 1SAM50000R1010 0.27 7.5 10 8.00 12.0 5 180 MS12-12 1SAM50000R1012 0.1 5 10 10 10.0 16.0 5 240 MS12-16 1SAM50000R1011 0.1 5 10 15 16.0 20.0 5 00 MS12-20 1SAM50000R101 0.1 7.5 15 20 20.0 25.0 5 75 MS12-25 1SAM50000R1014 0.1 10 20 25 25.0 2.0 5 480 MS12-2 1SAM50000R1015 0.1 Weight (1 pc) 2 Notes: Manual motor starters should always be selected so that the actual motor current is within the setting range. SCCR 65kA when used with current limiter series S80W-SCLxxx-SR for 0.16 2A. Main dimensions mm, inches 81.25.2" 72.4 2.85" 81.05.19" 72.2 2.84" 1.5 5.5 4. 0.06" 0.22" 0.22" 1.5 0.06" 5.5 0.22" 4.5 1.71" 90.54" 1.7 0.1" 75 2.95" 5 1.8" 45" 1.77" 97.8.85" 1.7 75 2.95" 5 1.8" 45 1.77" 0.1" 14 0.55" 45 1.77" 14 0.55" 2CDC242015F0009 14 0.55" 14 0.55" 45 1.77" 2CDC242016F0009 MS12 10 A MS12 12 A US Catalog Motor Protection and Control 2/9

MS165 manual motor starters 10 to 65 A with thermal and electromagnetic protection Description 2 MS165-65 2CDC241004V0015 MS165 is a compact and powerful range for motor protection up to 60 HP (600 V) / 65 A in width of 55 mm. This type has also a clear and reliable indication of fault in a separate window in the event of short-circuit tripping. Additional features include the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, power in-feed blocks are available as accessory. These are suitable throughout the MS116/MS12/MS165-range. Ordering details Rated operational power 240 V 480 V 600 V Setting range Short-circuit current rating (SCCR), group installation at 480V AC Rated instantaneous short-circuit current setting l i Catalog number Global code Weight (1 pc) HP HP HP A ka A kg 5 10 10 10... 16 65 240 MS165-16 1SAM451000R1011 0.95 5 10 15 14... 20 65 00 MS165-20 1SAM451000R1012 0.95 7.5 15 20 18... 25 65 75 MS165-25 1SAM451000R101 0.96 10 20 0 2... 2 65 480 MS165-2 1SAM451000R1014 0.97 15 0 40 0... 42 65 60 MS165-42 1SAM451000R1015 0.97 20 40 50 40... 54 65 810 MS165-54 1SAM451000R1016 0.97 20 50 60 52... 65 65 975 MS165-65 1SAM451000R1017 0.98 Note: Manual motor starters should always be selected so that the actual motor current is within the setting range. Main dimensions mm, inches 55 2.17" 17.5 0.69" 17.5 0.69" 5.5 0.22" 122.1 4.81" 95.5.76" 106 142.65 5 44.9 76.5 1.75 4.17" 5.62" 1.8" 1.77".01" 0.07" 2.05 0.08" 9.5.68" 2CDC242001F0014 MS165 2/10 Motor Protection and Control US Catalog

MO12 manual motor starters magnetic only 0.16 to 2 A with electromagnetic protection Description Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse-less against short-circuit. MO12-6. MO12-2 2CDC241009F0011 2CDC241008F0011 Fuse-less protection with a manual motor starter saves costs, space and ensures a quick reaction under short-circuit condition, by switching off the motor within milliseconds. Fuse-less starter combinations are setup together with contactors and overload relays. Ordering details Rated operational power 240 V 480 V 600 V Rated operational current Short-circuit current rating (SCCR), group installation at 480V AC Rated instantaneous short-circuit current setting l i Catalog number Global code HP HP HP A ka A kg 0.16 65 2.00 MO12-0.16 1SAM60000R1001 0.22 0.25 65.10 MO12-0.25 1SAM60000R1002 0.22 0.40 65 5.00 MO12-0.4 1SAM60000R100 0.22 0.6 65 7.90 MO12-0.6 1SAM60000R1004 0.22 1/2 1.0 65 12.5 MO12-1.0 1SAM60000R1005 0.22 /4 /4 1.6 65 20.0 MO12-1.6 1SAM60000R1006 0.27 1/2 1 1.5 2.5 65 1. MO12-2.5 1SAM60000R1007 0.27 1 2 4.0 65 50.0 MO12-4.0 1SAM60000R1008 0.27 1.5 5 6. 65 78.8 MO12-6. 1SAM60000R1009 0.27 5 7.5 10 65 125 MO12-10 1SAM60000R1010 0.27 7.5 10 12 5 150 MO12-12 1SAM60000R1012 0.1 5 10 10 16 5 200 MO12-16 1SAM60000R1011 0.1 5 10 15 20 5 250 MO12-20 1SAM60000R101 0.1 7.5 15 20 25 5 1 MO12-25 1SAM60000R1014 0.1 10 20 25 2 5 400 MO12-2 1SAM60000R1015 0.1 Weight (1 pc) 2 Note: For overload protection of motors, an appropriate thermal or electronic overload relay must be used. Main dimensions mm, inches 81.05.19" 81.25.2" 72.4 2.85" 72.2 2.84" 5.5 4. 1.5 0.06" 0.22" 0.22" 1.5 0.06" 5.5 0.22" 4.5 1.71" 90.54" 1.7 0.1" 75 2.95" 5 1.8" 45" 1.77" 97.8.85" 1.7 75 2.95" 5 1.8" 45 1.77" 0.1" 14 0.55" 45 1.77" 14 0.55" 2CDC242005F0011 14 0.55" 14 0.55" 45 1.77" 2CDC242006F0011 MO12 10 A MO12 12 A US Catalog Motor Protection and Control 2/11

MO165 manual motor starters magnetic only 16 to 65 A with electromagnetic protection 2 Description Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse-less against short-circuit. Fuse-less protection with a manual motor starter saves costs, space and ensures a quick reaction under short-circuit condition, by switching off the motor within milliseconds. Fuse-less starter combinations are setup together with contactors and overload relays. MO165-65 2CDC241005V0015 Ordering details Rated operational power 240 V 480 V 600 V Rated operational current Short-circuit current rating (SCCR), group installation at 480V AC Rated instantaneous short-circuit current setting l i Catalog number Global code HP HP HP A ka A kg 5 10 10 16 65 240 MO165-16 1SAM461000R1011 0.95 5 10 15 20 65 00 MO165-20 1SAM461000R1012 0.95 7.5 15 20 25 65 75 MO165-25 1SAM461000R101 0.96 10 20 0 2 65 480 MO165-2 1SAM461000R1014 0.97 15 0 40 42 65 60 MO165-42 1SAM461000R1015 0.97 20 40 50 54 65 810 MO165-54 1SAM461000R1016 0.97 20 50 60 65 65 975 MO165-65 1SAM461000R1017 0.98 Weight (1 pc) Main dimensions mm, inches 55 2.17" 17.5 0.69" 17.5 0.69" 5.5 0.22" 122.1 4.81" 95.5.76" 106 142.65 5 76.5 44.9 1.75 4.17" 5.62" 1.8" 1.77".01" 0.07" 2.05 0.08" 9.5.68" 2CDC242002F0014 M0165 2/12 Motor Protection and Control US Catalog

MS12-T circuit breakers for transformer protection 0.10 to 25 A with thermal and electromagnetic protection Description MS12-10T 2CDC241001F0014 Circuit breakers for transformer protection are electro mechanical protection devices specially designed to protect control transformers on the primary side. They allow fuse-less protection against overload and short-circuit, saving space and cost and ensuring a quick reaction under short-circuit condition by switching off the transformer within milliseconds. The short-circuit current setting is fixed to 20 times the operating current to handle the high inrush current generated by transformers. The device allows manual connection and disconnection of the transformer from the mains. MS12-T is a 45 mm (width) compact and powerful range for transformer protection up to 25 KW (600 V) / 25 A. This type has also a clear and reliable indication of fault in a separate window in the event of short-circuit tripping. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, power in-feed blocks are available as accessory. These are suitable throughout the MS116/MS12/MS165-range. Moreover ABB offers special accessories for fast single-phase setup. 2 Ordering details MS12-25T 2CDC241002F0014 Setting range Short-circuit current rating (SCCR), group installation at 480V AC Rated instantaneous short-circuit current setting l i Catalog number Global code Weight (1 pc) A ka A kg 0.10 0.16 65.2 MS12-0.16T 1SAM40000R1001 0.22 0.16 0.25 65 5 MS12-0.25T 1SAM40000R1002 0.22 0.25 0.40 65 8 MS12-0.4T 1SAM40000R100 0.22 0.40 0.6 65 12.6 MS12-0.6T 1SAM40000R1004 0.22 0.6 1.00 65 20 MS12-1.0T 1SAM40000R1005 0.22 1.00 1.60 65 2 MS12-1.6T 1SAM40000R1006 0.27 1.60 2.50 65 50 MS12-2.5T 1SAM40000R1007 0.27 2.50 4.00 65 80 MS12-4.0T 1SAM40000R1008 0.27 4.00 6.0 65 126 MS12-6.T 1SAM40000R1009 0.27 6.0 10.0 65 200 MS12-10T 1SAM40000R1010 0.27 8.00 12.0 5 240 MS12-12T 1SAM40000R1012 0.1 10.0 16.0 5 20 MS12-16T 1SAM40000R1011 0.1 16.0 20.0 5 400 MS12-20T 1SAM40000R101 0.1 20.0 25.0 5 500 MS12-25T 1SAM40000R1014 0.1 Main dimensions mm, inches 81.05.19" 81.25.2" 72.2 2.84" 72.4 2.85" 5.5 4. 1.5 0.06" 0.22" 0.22" 1.5 0.06" 5.5 0.22" 4.5 1.71" 90.54" 1.7 0.1" 75 2.95" 5 1.8" 45" 1.77" 97.8.85" 1.7 75 2.95" 5 1.8" 45 1.77" 0.1" 14 0.55" 45 1.77" 14 0.55" 2CDC242015F0009 14 0.55" 14 0.55" 45 1.77" 2CDC242016F0009 MS12T 10 A MS12T 12 A US Catalog Motor Protection and Control 2/1

Main accessories MS116, MS12, MS165, MO12, MO165, MS12-T Manual motor starters with accessories (MS116, MO12, MO165) 2 HK1 SK1 HK1 MS116 MO12 HK1 MO165 AA1 UA1 HKF1 2CDC242001F0015 Manual motor starters with accessories (MS12, MS165) and circuit breaker for transformer protection (MS12-T) HK1 SK1 HK1 MS12 MS12-T HK1 SK1 CK1 HK1 MS165 CK1 AA1 HKF1 UA1 2CDC242002F0015 2/14 Motor Protection and Control US Catalog

Main accessories MS116, MS12, MS165, MO12, MO165, MS12-T HKF1-11 1SBC101208F0014 Description MMS and MS12-T can be equipped with auxiliary contacts for lateral/front mounting, signaling contacts for lateral mounting, undervoltage releases and shunt trips. Two signaling contacts are available. The accessories can be fitted wiring free and without tools. A variety of combinations is possible as required for the application. The auxiliary contacts change position with the main contacts. The signaling contact SK signals tripping regardless if it was caused by short-circuit or overload. The signaling contact CK signals tripping in case it was caused by short-circuit. Undervoltage releases are used for remote tripping of the manual motor starters especially for emergency stop circuits. Shunt trips release the MMS used for remote tripping. These main accessories are suitable throughout the MS116/MS12/MS165-range. 2 HK1-11 SK1-11 CK1-11 1SBC101209F0014 1SBC101210F0014 1SBC101286F0014 Ordering details Suitable for Auxiliary contacts N.O. Auxiliary contacts N.C. Description Catalog number Global code Pkg qty Auxiliary contacts mountable on the front MS116, MS12, 1 1 HKF1-11 1SAM201901R1001 10 0.02 MS165 MO12, 1 0 HKF1-10 1SAM201901R100 10 0.01 MO165 MS12-T 0 1 HKF1-01 1SAM201901R1004 10 0.02 2 0 HKF1-20 1SAM201901R1002 10 0.02 Auxiliary contacts mountable on the right MS116, MS12, 1 1 max. 2 pieces HK1-11 1SAM201902R1001 2 0.04 MS165 MO12, 2 0 max. 2 pieces HK1-20 1SAM201902R1002 2 0.04 MO165 MS12-T 0 2 max. 2 pieces HK1-02 1SAM201902R100 2 0.04 2 0 with lead contacts HK1-20L 1SAM201902R1004 2 0.04 Signaling contacts mountable on the right MS116, MS12, MS165 MO12, MO165 MS12-T 1 2 1 0 for tripped alarm, max. 2 pieces for tripped alarm, max. 2 pieces 0 2 for tripped alarm, max. 2 pieces MS12, MS165, 1 1 for short-circuit alarm, MS12-T max. 2 pieces 2 0 for short-circuit alarm, max. 2 pieces 0 2 for short-circuit alarm, max. 2 pieces pcs Weight (1 pc) SK1-11 1SAM20190R1001 2 0.04 SK1-20 1SAM20190R1002 2 0.04 SK1-02 1SAM20190R100 2 0.04 CK1-11 1SAM20190R100 2 0.04 CK1-20 1SAM01901R1002 2 0.04 CK1-02 1SAM01901R100 2 0.04 kg Main dimensions mm, inches 42.1 45 72 90 1.66" 1.77" 2.8".54" 9 0.5" 5.5 0.22" 27.8 1.09" 42. 1.67" 68.8 2.71" 2CDC242001F0012 HK1 US Catalog Motor Protection and Control 2/15

Main accessories MS116, MS12, MS165, MO12, MO165, MS12-T Ordering details 2 AA1-24 1SBC101211F0014 Suitable for Rated control supply voltage Catalog number Global code Pkg qty Weight (1 pc) 50 Hz V AC 60 Hz V AC pcs kg Shunt trips mountable on the left MS116, MS12, 20... 24 20... 24 AA1-24 1SAM201910R1001 1 0.10 MS165, MO12, 110 110 AA1-110 1SAM201910R1002 1 0.10 MO165, MS12-T 200... 240 200... 240 AA1-20 1SAM201910R100 1 0.10 50... 415 50... 415 AA1-400 1SAM201910R1004 1 0.10 UA1-24 1SBC101212F0014 Undervoltage releases mountable on the left MS116, MS12, 20 24 UA1-20 1SAM201904R1010 1 0.10 MS165, MO12, 24 - UA1-24 1SAM201904R1001 1 0.10 MO165, MS12-T 48 - UA1-48 1SAM201904R1002 1 0.10 60 - UA1-60 1SAM201904R100 1 0.10 110 120 UA1-120 1SAM201904R1004 1 0.10-208 UA1-208 1SAM201904R1008 1 0.10 20 240 UA1-20 1SAM201904R1005 1 0.10 400 - UA1-400 1SAM201904R1006 1 0.10 415 480 UA1-415 1SAM201904R1007 1 0.10-575 UA1-575 1SAM201904R1009 1 0.10 Main dimensions mm, inches 90.54" 45 1.77" 7 1.46" 4.5 1.71" 70 2.76" 5.5 0.22" 18 0.71" 2CDC242002F0012 AA1, UA1 2/16 Motor Protection and Control US Catalog

Main accessories MS116, MS12, MS165, MO12, MO165 Manual motor starter with three-phase busbar systems (MS116, MS12, MO12) S1-M2-25 S1-M-5 PS1-..-65 2 PS1-..-100 S1-M1-25 BS1- SA1 2CDC242021F001 2CDC242020F001 PS1-..-65 Three-phase busbar up to 65 A Three-phase busbar up to 92 A Manual motor starter with three-phase busbar systems (MS165, MO165) PS2-4-0-125 PS2-2-0-125 Three-phase busbar up to 125 A 2CDC242006F0015 BS2-2CDC242005F0015 PS2-4-0-125 Three-phase busbar up to 125 A US Catalog Motor Protection and Control 2/17

Main accessories MS116, MS12, MO12, MS12-T 2 PS1-2-0-65 PS1--1-100 S1-M1-25 S1-M2-25 SA2 1SBC101226F0014 1SBC101266F0014 2CDC24102F001 2CDC241017F0010 2CDC241014F0010 Description Three-phase busbars ensure a quick and safe connection and are therefore a cost effective solution. A variety of different three-phase busbars up to 92 A are in the assortment. Between 2 and 5 manual motor starters with none, one or two lateral auxiliary contacts can be connected. Different three-phase feeder terminals are available according to the application. Phase connecting links and phase power infeed blocks are also available for single-phase applications. Ordering details Suitable for Rated operational current Number of MMS Number of lateral aux. Catalog number Global code Pkg qty Weight (1 pc) A pcs kg Three-phase busbars MS116, MS12, 65 2 0 PS1-2-0-65 1SAM201906R1102 10 0.0 MO12 65 0 PS1--0-65 1SAM201906R110 10 0.06 65 4 0 PS1-4-0-65 1SAM201906R1104 10 0.08 65 5 0 PS1-5-0-65 1SAM201906R1105 10 0.10 65 2 1 PS1-2-1-65 1SAM201906R1112 10 0.04 65 1 PS1--1-65 1SAM201906R111 10 0.06 65 4 1 PS1-4-1-65 1SAM201906R1114 10 0.09 65 5 1 PS1-5-1-65 1SAM201906R1115 10 0.11 65 2 2 PS1-2-2-65 1SAM201906R1122 10 0.04 65 2 PS1--2-65 1SAM201906R112 10 0.07 65 4 2 PS1-4-2-65 1SAM201906R1124 10 0.10 65 5 2 PS1-5-2-65 1SAM201906R1125 10 0.12 MS116, MS12, MO12 Suitable for 92 0 PS1--0-100 1SAM201916R110 10 0.08 92 4 0 PS1-4-0-100 1SAM201916R1104 10 0.12 92 5 0 PS1-5-0-100 1SAM201916R1105 10 0.15 92 1 PS1--1-100 1SAM201916R111 10 0.09 92 4 1 PS1-4-1-100 1SAM201916R1114 10 0.1 92 5 1 PS1-5-1-100 1SAM201916R1115 10 0.17 92 2 PS1--2-100 1SAM201916R112 10 0.11 Rated operational Rated cross Mounting form Catalog Global code Pkg Weight current section number qty (1 pc) A mm² pcs kg SA1 SK0108B91 Three-phase feeder terminals MS116, MS12, 6 25 Flat S1-M1-25 1SAM201907R1101 10 0.04 MO12 6 25 High S1-M2-25 1SAM201907R1102 10 0.05 6 25 UL/CSA Type E/F S1-M-25 1SAM201907R110 10 0.04 92 5 UL/CSA Type E/F S1-M-5 1SAM20191R110 10 0.06 PB1-1-2 2CDC241004F0014 Suitable for Description Catalog number Global code Pkg qty Weight (1 pc) pcs kg MS116, MS12, Protection cover for busbars BS1-1SAM201908R1001 50 0.01 MO12 MS116, MS12, Screw fixing kit MS116-SMF 1SAM201909R1001 1 0.02 MO12, MS12-T Padlock + two keys SA2 GJF110190R0002 10 0.02 MS116 Lock handle SA1 GJF110190R0001 10 0.01 Lock handle box SA1/SA2 SA GJF110190R000 10 0.05 S1-PB1-25 2CDC241005S0014 Accessories for single-phase connection (IEC only) MS116, MS12, Phase connecting link PB1-1-2 1SAM201914R1001 1 0.01 MO12, MS12-T Phase power infeed block S1-PB1-25 1SAM201914R1002 1 0.01 2/18 Motor Protection and Control US Catalog

Main accessories MS165, MO165 Description PS2-2-0-125 PS2--0-125 2CDC241010V0014 2CDC241002V0015 2CDC24100V0015 Three-phase busbars ensure a quick and safe connection and are therefore a cost effective solution. A variety of different three-phase busbars up to 125 A are in the assortment. Between 2 and 5 manual motor starters with none, one or two lateral auxiliary contacts can be connected. Ordering details Suitable for Rated operational current Number of MMS Number of lateral aux. Catalog number Global code Pkg qty Weight (1 pc) A pcs kg Three-phase busbars MS165, MO165 125 2 0 PS2-2-0-125 1SAM401920R1002 10 0.10 125 0 PS2--0-125 1SAM401920R100 10 0.16 125 4 0 PS2-4-0-125 1SAM401920R1004 10 0.2 125 2 2 PS2-2-2-125 1SAM401920R1022 10 0.12 125 2 PS2--2-125 1SAM401920R102 10 0.20 125 4 2 PS2-4-2-125 1SAM401920R1024 10 0.28 Note: Other busbar types available on request. 2 KA165 BS2-2CDC241001V0015 Suitable for Description Catalog number Global code Pkg qty Weight (1 pc) pcs kg MS165, MO165 Terminal shroud KA165 1SAM401922R1001 10 0.0 Protection cover for busbars BS2-1SAM401921R1001 50 0.01 Padlock + two keys SA2 GJF110190R0002 10 0.02 SA2 2CDC24102F001 US Catalog Motor Protection and Control 2/19

Main accessories MS116, MS12, MO12 Description 2 IB12-Y 2CDC241004F0010 IB12 are UL/CSA Type 12 enclosures for single MMS installation. Additional mounting of auxiliary and signaling contacts, shunt trips and undervoltage release is possible. The handle is lockable in OFF position. For detailed specification see installation instruction. DMS12 are UL/CSA Type 12 door mounting kits for MMS installation in any enclosure. Additional mounting of auxiliary, signaling, shunt trips and undervoltage release is possible. The handle is lockable in OFF position. For detailed specification see installation instruction. Ordering details Suitable for Description Color Catalog number Global code Pkg qty pcs Weight (1 pc) kg IB12-G 2CDC24100F0010 UL/CSA Type 12 enclosures MS116, MS12, Padlockable max. MO12 padlocks with bail diameter 4... 6.5 mm UL/CSA Type 12 door mounting kits MS116, MS12, Padlockable max. MO12 padlocks with bail diameter 4... 6.5 mm Yellow/red IB12-Y 1SAM201911R1011 1 0.7 Grey/black IB12-G 1SAM201911R1010 1 0.7 Yellow/red DMS12-Y 1SAM201912R1011 1 0.17 Grey/black DMS12-G 1SAM201912R1010 1 0.17 Note: Indication I-O-T and ON-OFF-T DMS12-Y 2CDC241002F0010 2CDC241001F0010 DMS12-G Main dimensions mm, inches 118 4.65" 119 4.69" 15.7 5.4" 92.62" 24.94" 7.2" 18 0 OFF I ON 6.85" 7.64" 174 194 4.76" 121 0 OFF I ON 2CDC242011F0011 116.15 4.57" 2CDC242012F0011 IB12 DMS12 2/20 Motor Protection and Control US Catalog

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T Main circuit Utilization characteristics according to UL/CSA Type MS116 MS12 MS165 MO12 MO165 MS12-T Standards UL 60947-1, UL 60947-4-1 (UL 508), CSA C22.2 No.60947-4-1 (CSA C22.2 - No.14) Rated operational voltage Ue acc. to UL/CSA 600 V AC - Trip class 10A 10 - - Motor ratings 1) Horsepower See table "Motor ratings, three-phase" - Full Load Amps (FLA) See table "Motor ratings, three-phase" - Locked Rotor Amps (LRA) See table "Motor ratings, three-phase" - 2 1) See product data sheets for UL/CSA single-phase motor and general use (AC-1) ratings. UL/CSA ratings overview Type MS116 MS12 MS165 MO12 MO165 MS12-T Manual Motor Controller x x x x x - Manual Motor Controller, Suitable as Motor Disconnect x x x x x - Manual Motor Controller, Suitable for use in Group Installations x x x x x - Manual Motor Controller, Suitable for Tap Conductor Protection in Group - x x x x - Installations Manual self-protected Combination Motor Controller (Type E) - x x - - - Combination Motor Controller (Type F) - with AF with AF with AF contactor - - contactor contactor and EOL Main circuit Utilization characteristics according to IEC/EN Type MS116 MS12 MS165 MO12 MO165 MS12-T Standards IEC/EN 60947 2, IEC/EN 60947-4-1, IEC/EN 60947-1 Rated operational voltage Ue 690 V AC 690 V AC / 690 V AC 690 V AC 690 V AC 690 V AC 250 V DC Rated frequency 50/60 Hz DC, 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Trip class 10A 10 10 - - 10 Number of poles Duty time 100 % Mechanical durability 100000 cycles 100000 cycles 50000 cycles 100000 cycles 50000 cycles 100000 cycles Electrical durability up to 16 A 100000 cycles 50000 cycles 25000 cycles 50000 cycles 25000 cycles 50000 cycles 20... 65 A 50000 cycles 50000 cycles 25000 cycles 50000 cycles 25000 cycles 50000 cycles Rated impulse withstand voltage Uimp 6 kv 6 kv 8 kv 6 kv 8 kv 6 kv Rated insulation voltage Ui 690 V 690 V 1000 V 690 V 1000 V 690 V Rated operational current Ie See ordering details US Catalog Motor Protection and Control 2/21

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T 2 UL/CSA Motor ratings, three-phase MS116 Type 200 V AC 208 V AC 220 240 V AC 440 480 V AC 550 600 V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA MS116-0.16-0.16 0.96-0.16 0.96-0.16 0.96-0.16 0.96-0.16 0.96 MS116-0.25-0.25 1.5-0.25 1.5-0.25 1.5-0.25 1.5-0.25 1.5 MS116-0.40-0.4 2.4-0.4 2.4-0.4 2.4-0.4 2.4-0.4 2.4 MS116-0.6-0.6.78-0.6.78-0.6.78-0.6.78-0.6.78 MS116-1.0-1 6-1 6-1 6-1 6 1/2 1 6 MS116-1.6-1.6 9.6-1.6 9.6-1.6 9.6 /4 1.6 9.6 /4 1.6 9.6 MS116-2.5 1/2 2.5 15 1/2 2.5 15 1/2 2.5 15 1 2.5 15 1 1/2 2.5 15 MS116-4.0 /4 4 24 /4 4 24 1 4 24 2 4 24.9 25.6 MS116-6. 1 6. 7.8 1 6. 7.8 1 1/2 6. 7.8 4.8 2 5 6.1 6.8 MS116-10 2 7.8 57.5 2 7.5 55 9.6 64 5 7.6 46 7 1/2 9 50.8 MS116-12 11 7.6 10.6 71 9.6 64 7 1/2 11 6.5 10 11 64.8 MS116-16 11 7.6 10.6 71 5 15.2 92 10 14 81 10 11 64.8 MS116-20 5 17.5 105.8 5 16.7 102 5 15.2 92 10 14 81 15 17 9 MS116-25 5 17.5 105.8 7 1/2 24.2 140 7 1/2 22 127 15 21 116 20 22 116 MS116-2 7 1/2 25. 146 10 0.8 179 10 28 162 20 27 145 25 27 146 UL/CSA Motor ratings, three-phase MS12 Type 200 V AC 208 V AC 220 240 V AC 440 480 V AC 550 600 V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA MS12-0.16-0.16 0.96-0.16 0.96-0.16 0.96-0.16 0.96-0.16 0.96 MS12-0.25-0.25 1.5-0.25 1.5-0.25 1.5-0.25 1.5-0.25 1.5 MS12-0.40-0.4 2.4-0.4 2.4-0.4 2.4-0.4 2.4-0.4 2.4 MS12-0.6-0.6.78-0.6.78-0.6.78-0.6.78-0.6.78 MS12-1.0-1 6-1 6-1 6-1 6 1/2 1 6 MS12-1.6-1.6 9.6-1.6 9.6-1.6 9.6 /4 1.6 9.6 /4 1.6 9.6 MS12-2.5 1/2 2.5 15 1/2 2.5 15 1/2 2.5 15 1 2.5 15 1-1/2 2.5 15 MS12-4.0 /4 4 24 /4 4 24 1 4 24 2 4 24.9 25.6 MS12-6. 1 6. 7.8 1 6. 7.8 1 1/2 6. 7.8 4.8 2 5 6.1 6.8 MS12-10 2 7.8 57.5 2 7.5 55 9.6 64 5 7.6 46 7 1/2 9 50.8 MS12-12 11 7.6 10.6 71 9.6 64 7 1/2 11 6.5 10 11 64.8 MS12-16 11 7.6 10.6 71 5 15.2 92 10 14 81 10 11 64.8 MS12-20 5 17.5 105.8 5 16.7 102 5 15.2 92 10 14 81 15 17 9 MS12-25 5 17.5 105.8 7 1/2 24.2 140 7 1/2 22 127 15 21 116 20 22 116 MS12-2 7 1/2 25. 146 10 0.8 179 10 28 162 20 27 145 25 27 146 UL/CSA Motor ratings, three-phase MS165 Type 200 V AC 208 V AC 220 240 V AC 440 480 V AC 550 600 V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA MS165-16 11 7.6 10.6 71 5 15.2 92 10 14 81 10 11 64.8 MS165-20 5 17.5 105.8 5 16.7 102 5 15.2 92 10 14 81 15 17 9 MS165-25 5 17.5 105.8 7 1/2 24.2 140 7 1/2 22 127 15 21 116 20 22 116 MS165-2 7 1/2 25. 146 10 0.8 179 10 28 162 20 27 145 0 2 174 MS165-42 10 2.2 186. 10 0.8 179 15 42 22 0 40 218 40 41 22 MS165-54 15 48. 267 15 46.2 257 20 54 290 40 52 290 50 52 290 MS165-65 20 62.1 4 20 59.4 21 20 54 290 50 65 6 60 62 48 hp FLA LRA Horsepower Full Load Amps Locked Rotor Amps Note: Manual motor starters should always be selected so that the actual motor current is within the setting range; see ordering detail pages. Horsepower (hp) ratings are for reference only. 2/22 Motor Protection and Control US Catalog

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T UL/CSA Motor ratings, three-phase MO12 Type 200 V AC 208 V AC 220 240 V AC 440 480 V AC 550 600 V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA MO12-0.16-0.16 0.96-0.16 0.96-0.16 0.96-0.16 0.96-0.16 0.96 MO12-0.25-0.25 1.5-0.25 1.5-0.25 1.5-0.25 1.5-0.25 1.5 MO12-0.40-0.4 2.4-0.4 2.4-0.4 2.4-0.4 2.4-0.4 2.4 MO12-0.6-0.6.78-0.6.78-0.6.78-0.6.78-0.6.78 MO12-1.0-1 6-1 6-1 6-1 6 1/2 1 6 MO12-1.6-1.6 9.6-1.6 9.6-1.6 9.6 /4 1.6 9.6 /4 1.6 9.6 MO12-2.5 1/2 2.5 15 1/2 2.5 15 1/2 2.5 15 1 2.5 15 1 1/2 2.5 15 MO12-4.0 /4 4 24 /4 4 24 1 4 24 2 4 24.9 25.6 MO12-6. 1 6. 7.8 1 6. 7.8 1 1/2 6. 7.8 4.8 2 5 6.1 6.8 MO12-10 2 7.8 57.5 2 7.5 55 9.6 64 5 7.6 46 7 1/2 9 50.8 MO12-12 11 7.6 10.6 71 9.6 64 7 1/2 11 6.5 10 11 64.8 MO12-16 11 7.6 10.6 71 5 15.2 92 10 14 81 10 11 64.8 MO12-20 5 17.5 105.8 5 16.7 102 5 15.2 92 10 14 81 15 17 9 MO12-25 5 17.5 105.8 7 1/2 24.2 140 7 1/2 22 127 15 21 116 20 22 116 MO12-2 7 1/2 25. 146 10 0.8 179 10 28 162 20 27 145 25 27 146 2 UL/CSA Motor ratings, three-phase MO165 Type 200 V AC 208 V AC 220 240 V AC 440 480 V AC 550 600 V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA MO165-16 11 7.6 10.6 71 5 15.2 92 10 14 81 10 11 64.8 MO165-20 5 17.5 105.8 5 16.7 102 5 15.2 92 10 14 81 15 17 9 MO165-25 5 17.5 105.8 7 1/2 24.2 140 7 1/2 22 127 15 21 116 20 22 116 MO165-2 7 1/2 25. 146 10 0.8 179 10 28 162 20 27 145 0 2 174 MO165-42 10 2.2 186. 10 0.8 179 15 42 22 0 40 218 40 41 22 MO165-54 15 48. 267 15 46.2 257 20 54 290 40 52 290 50 52 290 MO165-65 20 62.1 4 20 59.4 21 20 54 290 50 65 6 60 62 48 hp FLA LRA Horsepower Full Load Amps Locked Rotor Amps US Catalog Motor Protection and Control 2/2

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T 2 UL/CSA Maximum short-circuit current ratings MS116 Type Manual Motor Controllers Branch circuit protection, max. size per NEC/CEC 1) for motor disconnect 2) for group installations Fuses Circuit breaker 480 V 600 V 480 V 600 V A A ka ka ka ka MS116-0.16 100-0 5 0 5 MS116-0.25 100-0 5 0 5 MS116-0.40 100-0 5 0 5 MS116-0.6 100-0 5 0 5 MS116-1.0 100-0 5 0 5 MS116-1.6 100-0 5 0 5 MS116-2.5 100-0 5 0 5 MS116-4.0 100-18 5 18 5 MS116-6. 100-18 5 18 5 MS116-10 100-18 5 18 5 MS116-12 100-18 5 18 5 MS116-16 100-18 5 18 5 MS116-20 100-18 5 18 5 MS116-25 100-18 5 18 5 MS116-2 100-18 5 18 5 1) NEC: NFPA 70 National Electrical Code ; CEC: CSA C22.1 Canadian Electrical Code. 2) Suitable as motor disconnect only when provide with padlock adaptor SA1 or SA. for motor disconnect for group installations for tap conductor protection in UL/CSA Maximum short-circuit current ratings MS12 Type Manual Motor Controllers Manual self-protected Combination Branch circuit protection, max. Motor Controllers (Type E) 2) size per NEC/CEC 1) group installations Fuses Circuit breaker 480 V 600 V 480 V 600 V 480 V 600 V 480Y / 277 V 600Y / 47 V A A ka ka ka ka ka ka ka ka MS12-0.16 Any Listed Any Listed 65 47 65 47 65 47 65 47 MS12-0.25 fuses. Size UL489 / 65 47 65 47 65 47 65 47 per NEC/CEC CSA C22.2 MS12-0.40 No.5 circuit 65 47 65 47 65 47 65 47 MS12-0.6 breaker. 65 47 65 47 65 47 65 47 MS12-1.0 Size per 65 47 65 47 65 47 65 47 NEC/CEC MS12-1.6 65 47 65 47 65 47 65 47 MS12-2.5 65 47 65 47 65 47 65 47 MS12-4.0 65 47 65 47 65 47 65 47 MS12-6. 65 18 65 5 65 18 65 18 MS12-10 65 18 65 5 65 18 65 18 MS12-12 0 18 5 5 0 18 0 - MS12-16 0 18 5 5 0 18 0 - MS12-20 0 18 5 5 0 18 0 - MS12-25 0 18 5 5 0 18 0 - MS12-2 0 18 5 5 0 18 0-1) NEC: NFPA 70 National Electrical Code ; CEC: CSA C22.1 Canadian Electrical Code. 2) Requires the use of S1-M-xx line-side terminal feeder block. Note: SCCR 65kA when used with current limiter series S80W-SCLxxx-SR for 0.16 2A. 2/24 Motor Protection and Control US Catalog

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T Type Combination Motor Controllers UL/CSA Maximum short-circuit current ratings MS12/MO12 with AF contactors Type Combination Motor Controllers (Type F) 1) (Type F) 1) Minimum contactor size 480Y / 277 V 600Y / 47 V Minimum contactor 480Y / 277 V 600Y / 47 V ka ka Size TOL ka ka MS12-0.16 AF09 100 50 MO12-0.16 AF09 TF42 65 50 MS12-0.25 AF09 100 50 MO12-0.25 AF09 TF42 65 50 MS12-0.40 AF09 100 50 MO12-0.40 AF09 TF42 65 50 MS12-0.6 AF09 100 50 MO12-0.6 AF09 TF42 65 50 MS12-1.0 AF09 100 50 MO12-1.0 AF09 TF42 65 50 MS12-1.6 AF09 100 50 MO12-1.6 AF09 TF42 65 50 MS12-2.5 AF09 100 50 MO12-2.5 AF09 TF42 65 50 MS12-4.0 AF09 100 50 MO12-4.0 AF09 TF42 65 50 MS12-6. AF09 100 47 MO12-6. AF09 TF42 65 47 MS12-10 AF09 100 0 MO12-10 AF09 TF42 65 0 MS12-12 AF09 65 0 MO12-12 AF09 TF42 65 0 MS12-16 AF12 65 0 MO12-16 AF12 TF42 65 0 MS12-20 AF26 65 - MO12-20 AF16 TF42 65 0 MS12-25 AF26 50 - MO12-25 AF26 TF42 50 0 MS12-2 AF8 50 - MO12-2 AF8 TF42 50 0 2 1) Requires the use of S1-M-xx line-side terminal feeder block. for motor disconnect for group installations for tap conductor protection in UL/CSA Maximum short-circuit current ratings MS165 Type Manual Motor Controllers Manual self-protected Combination Branch circuit protection, max. Motor Controllers (Type E) size per NEC/CEC 1) group installations Fuses Circuit breaker 480 V 600 V 480 V 600 V 480 V 600 V 480Y / 277 V 600Y / 47 V A A ka ka ka ka ka ka ka ka MS165-16 Any Listed Any Listed 65 0 65 0 65 0 65 0 MS165-20 fuses. Size per UL489 / 65 0 65 0 65 0 65 0 NEC/CEC CSA C22.2 MS165-25 No.5 circuit 65 0 65 0 65 0 65 0 MS165-2 breaker. 65 0 65 0 65 0 65 0 MS165-42 Size per 65 0 65 0 65 0 65 0 NEC/CEC MS165-54 65 0 65 0 65 0 65 0 MS165-65 65 0 65 0 65 0 65 0 1) NEC: NFPA 70 National Electrical Code ; CEC: CSA C22.1 Canadian Electrical Code. UL/CSA Maximum short-circuit current ratings MS165/MO165 with AF contactors Type Combination Motor Controllers (Type F) Type Combination Motor Controllers (Type F) Minimum contactor size 480Y / 277 V 600Y / 47 V Minimum contactor size 480Y / 277 V 600Y / 47 V ka ka TOL ka ka MS165-16 AF09 65 50 MO165-16 AF09 TF42 65 0 MS165-20 AF26 65 50 MO165-20 AF26 TF42 65 0 MS165-25 AF26 65 50 MO165-25 AF26 TF42 65 0 MS165-2 AF26 65 50 MO165-2 AF26 TF42 65 50 MS165-42 AF40 65 - MO165-42 AF40 TF65 65 - MS165-54 AF40 65 - MO165-54 AF40 TF65 65 - MS165-65 AF40 65 - MO165-65 AF40 TF65 65 - US Catalog Motor Protection and Control 2/25

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T 2 UL/CSA Maximum short-circuit current ratings MO12 Type Manual Motor Controllers Branch circuit protection, max. size per NEC/CEC 1) for motor disconnect for group installations for tap conductor protection in group installations Fuses Circuit breaker 480 V 600 V 480 V 600 V 480 V 600 V A A ka ka ka ka ka ka MO12-0.16 Any Listed fuses. Any Listed 65 47 65 47 65 47 MO12-0.25 Size per NEC/ UL489 / CSA 65 47 65 47 65 47 CEC C22.2 No.5 MO12-0.40 circuit breaker. 65 47 65 47 65 47 MO12-0.6 Size per NEC/ 65 47 65 47 65 47 MO12-1.0 CEC 65 47 65 47 65 47 MO12-1.6 65 47 65 47 65 47 MO12-2.5 65 47 65 47 65 47 MO12-4.0 65 47 65 47 65 47 MO12-6. 65 18 65 5 65 18 MO12-10 65 18 65 5 65 18 MO12-12 0 18 5 5 0 18 MO12-16 0 18 5 5 0 18 MO12-20 0 18 5 5 0 18 MO12-25 0 18 5 5 0 18 MO12-2 0 18 5 5 0 18 1) NEC: NFPA 70 National Electrical Code ; CEC: CSA C22.1 Canadian Electrical Code. UL/CSA Maximum short-circuit current ratings MO165 Type Manual Motor Controllers Branch circuit protection, max. size per NEC/CEC 1) for motor disconnect for group installations for tap conductor protection in group installations Fuses Circuit breaker 480 V 600 V 480 V 600 V 480 V 600 V A A ka ka ka ka ka ka MO165-16 Any Listed fuses. Any Listed 65 0 65 0 65 0 MO165-20 Size per NEC/ UL489 / CSA 65 0 65 0 65 0 CEC C22.2 No.5 MO165-25 circuit breaker. 65 0 65 0 65 0 MO165-2 Size per NEC/ 65 0 65 0 65 0 MO165-42 CEC 65 0 65 0 65 0 MO165-54 65 0 65 0 65 0 MO165-65 65 0 65 0 65 0 1) NEC: NFPA 70 National Electrical Code ; CEC: CSA C22.1 Canadian Electrical Code. 2/26 Motor Protection and Control US Catalog

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T General technical data Type MS116 MS12 MS165 MO12 MO165 MS12-T Pollution degree Phase loss sensitivity Yes Yes Yes No No Yes Disconnect function acc. to IEC/EN 60947-2 Yes Yes Yes Yes Yes Yes Ambient air temperature Operation Open - compensated -25... +55 C -25... +60 C -25... +60 C - - -25... +60 C Open -25... +70 C -25... +70 C -25... +60 C -25... +60 C -25... +60 C -25... +70 C Enclosed (IB12) 0... +40 C 0... +40 C - - - 0... +40 C Storage -50... +80 C -50... +80 C -50... +80 C -50... +80 C -50... +80 C -50... +80 C Ambient air temperature compensation Acc. to IEC/ EN60947-4-1 Acc. to IEC/ EN60947-4-1 Acc. to IEC/ EN60947-4-1 - - Acc. to IEC/ EN60947-4-1 Maximum operating altitude permissible 2000 m 2000 m 2000 m 2000 m 2000 m 2000 m Resistance to shock acc. to IEC 60068-2-27 25g / 11 ms 25g / 11 ms 25g / 11 ms 25g / 11 ms 25g / 11 ms 25g / 11 ms Resistance to vibrations acc. to IEC 60068-2-6 5g /... 150 Hz 5g /... 150 Hz 5g /... 150 Hz 5g /... 150 Hz 5g /... 150 Hz 5g /... 150 Hz Mounting position Position 1-6 (optional for single mounting) Position 1-6 (optional for single mounting) Position 1-6 (optional for single mounting) Position 1-6 (optional for single mounting) Position 1-6 (optional for single mounting) Position 1-6 (optional for single mounting) Mounting DIN-rail (EN 60715) DIN-rail (EN 60715) DIN-rail (EN 60715) DIN-rail (EN 60715) DIN-rail (EN 60715) DIN-rail (EN 60715) Group mounting On request On request On request On request On request - Minimum distance to other Horizontal 0 mm 0 mm 0 mm 0 mm 0 mm 0 mm units same type Vertical 150 mm 150 mm 150 mm 150 mm 150 mm 150 mm Minimum distance to electrical conductive board Horizontal, up to 400 V 0 mm 0 mm 0 mm 0 mm 0 mm 0 mm Horizontal, up to 690 V > 1.5 mm > 1.5 mm > 1.5 mm > 1.5 mm > 1.5 mm > 1.5 mm Vertical 75 mm 75 mm 75 mm 75 mm 75 mm 75 mm Degree of protection Housing IP20 IP20 IP20 IP20 IP20 IP20 Main circuit terminals IP20 IP20 IP10 IP20 IP10 IP20 2 Connecting characteristics Main circuit Type MS116 16 A MS116 20 A Connecting capacity Rigid 1 or 2 x 1... 4 mm² 2.5... 6 mm² Flexible with ferrule 1 or 2 x 0.75... 2.5 mm² 1... 6 mm² Flexible with insulated ferrule 1 or 2 x 0.75... 2.5 mm² 1... 6 mm² Flexible 1 or 2 x 0.75... 2.5 mm² 1... 6 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16-12 AWG 16-8 Stripping length 9 mm 10 mm Tightening torque 0.8... 1.2 Nm / 10 12 Ib.in 2.0 Nm / 18 Ib.in Recommended screw driver Pozidriv 2 Pozidriv 2 Main circuit Type MS12 10 A MS12 12 A Connecting capacity Rigid 1 or 2 x 1... 4 mm² 1... 2.5 mm² 2.5... 6 mm² Flexible with ferrule 1 or 2 x 0.75... 2.5 mm² 0.75... 6 mm² Flexible with insulated ferrule 1 or 2 x 0.75... 2.5 mm² 0.75... 6 mm² Flexible 1 or 2 x 0.75... 2.5 mm² 1... 2.5 mm² 2.5... 6 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16-12 AWG 16-8 Stripping length 9 mm 10 mm Tightening torque 0.8... 1.2 Nm / 10 12 Ib.in 2.0 Nm / 18 Ib.in Recommended screw driver Pozidriv 2 Pozidriv 2 US Catalog Motor Protection and Control 2/27

Technical data MS116, MS12, MS165, MO12, MO165, MS12-T 2 Connecting characteristics Main circuit Type MS165 Connecting capacity Rigid 1 or 2 x 1... 50 mm² Flexible with ferrule 1 or 2 x 1... 5 mm² Flexible with insulated ferrule 1 or 2 x 1... 5 mm² Flexible 1 or 2 x 1... 5 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16- Stripping length 16 mm Tightening torque 4.0 Nm / 5 Ib.in Recommended screw driver Pozidriv 2 Main circuit Type MO12 10 A MO12 12 A Connecting capacity Rigid 1 or 2 x 1... 4 mm² 1... 2.5 mm² 2.5... 6 mm² Flexible with ferrule 1 or 2 x 0.75... 2.5 mm² 0.75... 6 mm² Flexible with insulated ferrule 1 or 2 x 0.75... 2.5 mm² 0.75... 6 mm² Flexible 1 or 2 x 0.75... 2.5 mm² 1... 2.5 mm² 2.5... 6 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16-12 AWG 16-8 Stripping length 9 mm 10 mm Tightening torque 0.8... 1.2 Nm / 10 12 Ib.in 2.0 Nm / 18 Ib.in Recommended screw driver Pozidriv 2 Pozidriv 2 Main circuit Type MO165 Connecting capacity Rigid 1 or 2 x 1... 50 mm² Flexible with ferrule 1 or 2 x 1... 5 mm² Flexible with insulated ferrule 1 or 2 x 1... 5 mm² Flexible 1 or 2 x 1... 5 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16- Stripping length 16 mm Tightening torque 4.0 Nm / 5 Ib.in Recommended screw driver Pozidriv 2 Main circuit Type MS12-T 10 A MS12-T 12 A Connecting capacity Rigid 1 or 2 x 1... 4 mm² 1/2 x 1... 2.5 mm² 1/2 x 2.5... 6 mm² Flexible with ferrule 1 or 2 x 0.75... 2.5 mm² 1/2 x 0.75... 6 mm² Flexible with insulated ferrule 1 or 2 x 0.75... 2.5 mm² 1/2 x 0.75... 6 mm² Flexible 1 or 2 x 0.75... 2.5 mm² 1/2 x 1... 2.5 mm² 1/2 x 2.5... 6 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16-12 AWG 16-8 Stripping length 9 mm 10 mm Tightening torque 0.8... 1.2 Nm / 10 12 Ib.in 2.0 Nm / 18 Ib.in Recommended screw driver Pozidriv 2 Pozidriv 2 2/28 Motor Protection and Control US Catalog

Main accessories MS116, MS12, MS165, MO12, MO165, MS12-T General technical data Type HK1, SK1, CK1 HKF1 Standards IEC/EN 60947-2, IEC/EN 60947-4-1, IEC/EN 60947-1 Rated operational voltage Ue 690 V AC / 600 DC 250 V AC / 250 V DC Conventional free-air thermal current Ith 6 A 5 A Rated frequency 50/60 Hz Rated impulse withstand voltage Uimp 6 kv Rated insulation voltage Ui 690 V AC 250 V AC Pollution degree Ambient air temperature Operation -25... +70 C Storage -50... +80 C Resistance to shock acc. to IEC 60068-2-27 25g / 11 ms Resistance to vibrations acc. to IEC 60068-2-6 5g /... 150 Hz Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 24 V, 120 V 6 A A 240 V 4 A 1.5 A 400 V A - 440 V, 690 V 1 A - Ie / Rated operational current DC-1 acc. to IEC/EN 60947-5-1 for utilization category 24 V 2 A 1 A 125 V 0.55 A 0.27 A 250 V 0.27 A 0.11 A 440 V, 600 V 0.15 A - Minimum switching capacity 17 V / 5 ma Short-circuit protective device N.C., 95-96 10 A Type gg N.O., 97-98 10 A Type gg Duty time 100 % Mounting Right side of MMS / MS12-T Front of MMS / MS12-T Mounting positions 1-6 Mechanical durability 50000 cycles - Electrical durability 50000 cycles - 2 Contact utilization characteristics according to UL/CSA Type HK1, SK1, CK1 HKF1 Standards UL 60947-1, UL 60947-4-1 (UL 508), CSA C22.2 No.60947-4-1 (CSA C22.2 No.14) Rated operational voltage Ue acc. to UL/CSA 600 V AC / 600 V DC 250 V AC / 250 V DC Pilot duty A600, Q600 B00, Q00 AC thermal rated current 10 A 5 A AC maximum volt-ampere making 7200 VA 600 VA AC maximum volt-ampere breaking 720 VA 60 VA DC thermal rated current 2.5 A 2.5 A DC maximum volt-ampere making-breaking 69 VA 69 VA Connecting characteristics Auxiliary circuit Type HK1, SK1, CK1 HKF1 Connecting capacity Rigid 1 or 2 x 1... 1.5 mm² 1... 2.5 mm² Flexible with ferrule 1 or 2 x 0.75... 1.5 mm² Flexible with insulated ferrule 1 or 2 x 0.75... 1.5 mm² Flexible 1 or 2 x 0.75... 1.5 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16-14 Stripping length 8 mm Tightening torque 0.8... 1.2 Nm / 7 Ib.in Recommended screw driver Pozidriv 2 US Catalog Motor Protection and Control 2/29

Main accessories MS116, MS12, MS165, MO12, MO165, MS12-T 2 General technical data Type UA1 AA1 Standards IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-1, UL 60947-4-1 (UL 508), CSA C22.2 No.60947-4-1 (CSA C22.2 No.14) Rated control supply voltage see ordering details AA1-24: 20-24 V 50/60 Hz; 20-70 V 50/60 Hz KB = 5 s, 20-70 V DC KB = 5 s AA1-100: 110 V 50/60 Hz; 110-200 V 50/60 Hz KB = 5 s, 110-200 V DC KB = 5 s AA1-20: 200-240 V 50/60 Hz, 200-50 V 50/60 Hz KB = 5 s, 200-50 V DC KB = 5 s AA1-400: 50-415 V 50/60 Hz, 50-500 V 50/60 Hz KB = 5 s, 50-500 V DC KB = 5 s Rated frequency see ordering details 50/60 Hz, DC Operating voltage Tripping 0.5 0.7 x Us 0.7 1.1 x Us Coil operating voltage 0.85 1.1 x Us - Power consumption Pull-in AC on request on request DC on request on request Holding AC on request - DC on request - Rated impulse withstand voltage Uimp 6 kv 6 kv Rated insulation voltage Ui 690 V 690 V Pollution degree Ambient air temperature Operation -25. +60 C -25. +60 C Storage -50 +80 C -50 +80 C Resistance to shock acc. to IEC 60068-2-27 25g / 11 ms 25g / 11 ms Resistance to vibrations acc. to IEC 60068-2-6 5g /... 150 Hz 5g /... 150 Hz Mounting left side of MMS / MS12-T left side of MMS / MS12-T Mounting positions - - Connecting characteristics Auxiliary circuit Type UA1 AA1 Connecting capacity Rigid 1 or 2 x 1... 4 mm² Flexible with ferrule 1 or 2 x 0.75... 2.5 mm² Flexible with insulated ferrule 1 x 2 x 0.75... 2.5 mm² 0.75... 1.5 mm² Flexible 1 or 2 x 0.75... 2.5 mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16-12 Stripping length 10 mm Tightening torque 0.8... 1.2 Nm / 7 Ib.in Recommended screw driver Pozidriv 2 2/0 Motor Protection and Control US Catalog

Main accessories MS116, MS12, MS165, MO12, MO165 General technical data Type PS1-xxx-65 PS1-xxx-100 S1-Mx-25 S1-Mx-5 Standards IEC/EN 60947-4-1, IEC/EN 60947-1, UL 60947-1, UL 60947-4-1 (UL 508), CSA C22.2 No.60947-4-1 (CSA C22.2 No.14) Rated operational voltage U e 690 V Rated operational voltage U e acc. to UL/CSA 600 V AC Rated operational current I e 65 A 100 A 65 A 100 A Rated operational current I e acc. to UL/CSA 65 A 92 A 65 A 92 A Rated frequency 50/60 Hz Rated impulse withstand voltage U imp 6 kv Rated insulation voltage U i 690 V AC Pollution degree Cross-section 10 mm² 16 mm² 25 mm² 5 mm² Ambient air temperature Operation -25... +70 C Storage -50... +80 C Resistance to shock acc. to IEC 60068-2-27 25g / 11 ms Resistance to vibrations acc. to IEC 60068-2-6 5g /... 150 Hz 2 Electrical connection Main circuit Type S1-Mx-25 S1-Mx-5 Connecting capacity Rigid 1 x 6... 25 mm² 10... 5 mm² Flexible with ferrule 1 x 6... 16 mm² 10... 5 mm² Flexible with insulated ferrule 1 x 6... 16 mm² 10... 5 mm² Flexible 1 x 6... 16 mm² 10... 5 mm² Stranded acc. to UL/CSA 1 x AWG 10-4 AWG 8-2 Stripping length 10 mm 12 mm Tightening torque 2.5 Nm / 22 Ib.in 4.5 Nm / 40 Ib.in Recommended screw driver Pozidriv 2 Hexagon SW4 Note: Technical data for PS2-xxx on request. US Catalog Motor Protection and Control 2/1

MS5100, MS495, MS497 manual motor starters 22 to 100 A with thermal and electromagnetic protection Description 2 MS5100-100 MS5100-100 no mirror Manual motor starters (MMS) are protection devices for the main circuit. They combine motor control and protection in a single device. MMS are used mainly to switch motors manually ON/OFF and protect them and the installation fuse-less against short-circuit, overload and phase failures 1). Fuse-less protection with a manual motor starter saves costs, space and ensures a quick reaction under short-circuit condition, by switching off the motor within milliseconds. Ordering details Rated operational power Setting range Short-circuit current rating (SCCR), group installation at 480V AC Rated instantaneous short-circuit current setting I i Catalog number Global code Weight (1 pc) 240 V 480 V 600 V MS495-40 1SBC101184F0014 HP HP HP A ka A kg MS5100 manual motor starters 0 75 100 40-100 65 240-100 MS5100-100 1SDA08204R1 1.200 MS495 manual motor starters 25 50 60 45-6 65 819 MS495-6 1SAM550000R1007 2.247 0 60 75 57-75 65 975 MS495-75 1SAM550000R1008 2.25 0 75 100 70-90 65 1170 MS495-90 1SAM550000R1009 2.280 40 75 100 80-100 65 125 MS495-100 1SAM550000R1010 2.295 MS497 manual motor starters 10 25 0 22-2 65 418 MS497-2 1SAM580000R1004 2.222 15 0 40 28-40 65 520 MS497-40 1SAM580000R1005 2.20 20 40 50 6-50 65 650 MS497-50 1SAM580000R1006 2.20 25 50 60 45-6 65 819 MS497-6 1SAM580000R1007 2.255 0 60 75 57-75 65 975 MS497-75 1SAM580000R1008 2.266 0 75 100 70-90 65 1170 MS497-90 1SAM580000R1009 2.268 40 75 100 80-100 65 125 MS497-100 1SAM580000R1010 2.275 1) The MS49x range offers phase loss sensitivity 2) For motor loads only up to 80 A 2CDC241020F0011 MS497-100 Main dimensions mm, inches 120 (4P) 4.72 114 4.49 45 1.77 0 0 0 1.18 1.18 1.18 95.5.76 90.5.56 82.5.25 12 0.47" 2 0.91" 8 0.1" 10 5.12 65 2.56 1 0.04 1 0.04 1 0.04 4 16 0.6 41 1.61 24 0.94 7 2.87 165 6.50" 155 6.10" 45 1.77" 116 4.57" 150 5.91" 1.1Nm 45 1.77 84.1 90 (P).54 1 1 0,04 0.12 116 4.56 2 0.08 1SDC2104HF0001 0 1.18" 70 2.56" 5 0.20" 7 0.28" 12 5.20" 15 6.02" 169 6.65" 2CDC242014F0011 MS5100 MS495, MS497 2/2 Motor Protection and Control US Catalog

Technical data MS5100, MS495, MS497 manual motor starters Main circuit Utilization characteristics according to IEC/EN Type MS5100 MS495, MS497 Standards IEC/EN 60947-2 IEC/EN 60947 2, IEC/EN 60947-4-1, IEC/EN 60947-1 Rated operational voltage U e 690 V AC 690 V AC / 450 V DC Rated frequency 50/60 Hz 50/60 Hz Trip class E, 5E, 10E, 20E 10 Number of poles Duty time 100 % Mechanical durability 25000 cycles 50000 cycles Electrical durability 8000 cycles 25000 cycles Rated impulse withstand voltage U imp 6 kv 6 kv Rated insulation voltage U i 690 V AC 690 V AC Rated operational current I e See ordering details Rated instantaneous short-circuit current setting I i See ordering details Rated service short-circuit breaking capacity I cs See table "Short-circuit breaking capacity and back-up fuses" Rated ultimate short-circuit breaking capacity I cu See table "Short-circuit breaking capacity and back-up fuses" 2 Short-circuit breaking capacity and back-up fuses l CS l CU I CC Rated service short-circuit breaking capacity Rated ultimate short-circuit breaking capacity Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if I CC > I CS Type 240 V AC 400 V AC 440 V AC 500 V AC 690 V AC I CS ka I CU ka gg, am A I CS ka I CU ka gg, am A I CS ka I CU ka gg, am A I CS ka I CU ka gg, am A I CS ka Short-circuit protection MS5100 MS5100-100 100 100-70 70-65 65-0 0-15 15 - I CU ka gg, am A Short-circuit protection MS495 MS495-6 25 50 160 20 50 160 6 12 160 6 80 MS495-75 No back-up fuse required up to 25 50 160 20 50 160 6 8 160 5 100 MS495-90 I CC = 100 ka 25 50 160 20 50 160 6 8 160 5 125 MS495-100 25 50 160 20 50 160 6 8 160 5 125 MS495-40: No need for back-up fuse in networks with a prospective current of up to 50 ka at 400 V. With an approbiate 125 A type gg fuse the device can be used in a network with a prospective current of up to 100 ka. MS495-100: No need for back-up fuse in networks with a prospective current of up to 50 ka at 400 V. With an approbiate 160 A type gg fuse the device can be used in a network with a prospective current of up to 100 ka. Short-circuit protection MS497 MS497-2 50 100 50 100 No back-up 11 22 100 7 12 6 fuse required MS497-40 50 100 50 100 up to 9 18 160 6 12 80 No backup fuse 50 100 7.5 15 160 5 10 100 I CC = 100 ka MS497-50 50 100 No back-up fuse required up to MS497-6 50 100 required 50 70 200 7.5 15 160 4 7.5 100 I CC = 100 ka MS497-75 50 100 up to I CC = 50 70 200 5 10 160 6 125 100 ka MS497-90 50 100 50 70 200 5 10 160 6 160 MS497-100 50 100 50 70 200 5 10 160 6 160 MS497-2: No need for back-up fuse in networks with a prospective current of up to 100 ka at 440 V. MS497-90: No need for back-up fuse in networks with a prospective current of up to 70 ka at 440 V. With an approbiate 200 A type gg fuse, the device can be used in a network with a prospective current of up to 100 ka. US Catalog Motor Protection and Control 2/

Technical data MS5100, MS495, MS497 manual motor starters 2 Main circuit Utilization characteristics according to UL/CSA Type MS5100 MS495, MS497 Standards UL489 UL 508, CSA 22.2 No. 14 Maximum operational voltage 600 V AC 600 V AC Manual motor controller ratings See table "UL 508 Manual motor controller" See table "UL 508 Manual motor controller" Trip rating 10 % of magentic setting 125 % FLA Motor ratings Horsepower See table "Motor ratings, three-phase" See table "Motor ratings, three-phase" Full Load Amps (FLA) See table "Motor ratings, three-phase" See table "Motor ratings, three-phase" Motor ratings, three-phase hp FLA Horsepower Full Load Amps Type General purpose rating Full Load Amps 200-208 V AC 20 V AC 460 V AC 575 V AC at max. 600 V AC A FLA hp hp hp hp MS5100-100 100 1) 100 0 0 75 100 MS495-6 6 6 20 25 50 60 MS495-75 75 75 25 25 60 75 MS495-90 90 90 0 0 75 100 MS495-100 100 100 40 40 75 100 MS497-2 2 2 10 10 25 0 MS497-40 40 40 15 15 0 40 MS497-50 50 50 15 20 40 50 MS497-6 6 6 20 25 50 60 MS497-75 75 75 25 25 60 75 MS497-90 90 90 0 0 75 100 MS497-100 100 100 0 40 75 100 1) MS5100-100: For motor loads only up to 80 A UL 508 Manual motor controller Type Circuit breaker or class R fuse per UL/NEC Max. circuit breaker or fuse per UL/NEC Maximum short-circuit current for motor disconnect for group installation for tap conductor for protection UL 508 Type E 1) Type E 480/600 V A 480/600 V A 480 V ka 600 V ka 480 V ka 600 V ka 480Y/277V ka 600Y/47V ka 480Y/277V ka 600Y/47V ka MS5100-100 - - 65 25 65 25 65 65 65 25 MS495-6 250 500 65 0 65 0 65 0 65 0 MS495-75 00 500 65 0 65 0 65 0 65 0 MS495-90 50 500 65 10 65 10 65-65 - MS495-100 400 500 65 10 65 10 65-65 - MS497-2 120 500 65 0 65 0 65 0 65 0 MS497-40 160 500 65 0 65 0 65 0 65 0 MS497-50 200 500 65 0 65 0 65 0 65 0 MS497-6 250 500 65 0 65 0 65 0 65 0 MS497-75 00 500 65 0 65 0 65 0 65 0 MS497-90 50 500 65 10 65 10 - - 65 - MS497-100 400 500 65 10 65 10 - - 65-1) Only with use DX495 2/4 Motor Protection and Control US Catalog

Technical data MS5100, MS495, MS497 manual motor starters General technical data Type MS5100 1) MS495 MS497 Pollution degree Phase loss sensitivity Yes Disconnect function acc. to IEC/EN 60947-2 Yes Yes Ambient air temperature Operation Open - compensated - -20... +60 C Open -25... +70 C -20... +70 C Enclosed -25... +70 C -20... +5 C Storage -40... +70 C -50... +80 C Ambient air temperature compensation Acc. to IEC/EN60947-4-1 Acc. to IEC/EN60947-4-1 Maximum operating altitude permissible 2000 m 2000 m Resistance to shock acc. to IEC 60068-2-27 12g / 11 ms - Resistance to vibrations acc. to IEC 60068-2-6 0.7g / 1... 100 Hz 2g / 5-150 Hz Mounting position Horizontal, vertical, or lying Position 1-6 (optional for single mounting) down position Mounting - DIN-rail 15 mm / 75 mm (EN 60715) Minimum distance to other units Horizontal 0 mm 0 mm same type Vertical - up to 240 V 50 mm Vertical - up to 440 V 70 mm Vertical - up to 500 V 110 mm Vertical - up to 690 V 150 mm Vertical - Minimum distance to Horizontal See "Insulation distances for - electrical conductive board Horizontal - up to 500 V installation in metallic cubicles" 10 mm Horizontal - up to 690 V 0 mm Vertical - up to 240 V 50 mm Vertical - up to 440 V 70 mm Vertical - up to 500 V 110 mm Vertical - up to 690 V 150 mm Vertical - Degree of protection Housing IP40 (on the lever) IP20 Main circuit terminals IP00 IP00 1) For U e > 440 V power supply only from the upper terminal/lugs 2 Insulation distances for installation in metallic cubicles Manual motor starter A B C mm/in mm/in mm/in MS5100 imm_a MS5100, insulation distances US Catalog Motor Protection and Control 2/5

Technical data MS5100, MS495, MS497 manual motor starters 2 Connecting characteristics Main circuit Type MS495 MS497 Connecting capacity Rigid 1 or 2 x 2.5... 16 mm² 2.5... 16 mm² Flexible with ferrule 1 x 2 x 10... 70 mm² 10... 50 mm² 10... 70 mm² 10... 50 mm² Flexible 1 x 2 x 10... 70 mm² 10... 50 mm² 10... 70 mm² 10... 50 mm² Stranded acc. to UL/CSA 1 x 2 x AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 Flexible acc. to UL/CSA 1 x 2 x AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 Stripping length 17 mm 17 mm Tightening torque 4-6 Nm / 5-5 Ib.in 4-6 Nm / 5-5 Ib.in Recommended screw driver Hexagon 4 Hexagon 4 Front terminals - F (UL Listed) Type MS5100 Vers. F Busbar dimensions W min 1 mm W max 20 mm H 7.5 mm Ø 6.5 mm D min 2.5 mm D max 5 mm Cable terminals W 20 mm Ø 6.5 mm Tightening torque 6 Nm / 5.1 Ib.in Recommended screw driver M6 Front terminal - F F terminal with cable lug F terminal with busbar 2/6 Motor Protection and Control US Catalog

MO5100, MO495, MO496 manual motor starters magnetic only 2 to 100 A with electromagnetic protection Description The manual motor starter magnetic only is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits. Ordering detail 2 MO5100-100 MO495-75 MO5100-100 no mirror ST02601 Rated operational power 1) Ratd operational current Short-circuit current rating (SCCR), group installation at 480V AC Rated instantaneous short-circuit current setting I i Catalog number Global code Weight (1 pc) 240 V 480 V 600 V HP HP HP A ka A kg MO5100 manual motor starter magnetic only 25 50-70 65 210-770 MO5100-70 1SDA08201R1 1.100 25 60-80 65 240-880 MO5100-80 1SDA08202R1 1.100 0 75-100 65 00-1100 MO5100-100 1SDA0820R1 1.100 MO495 manual motor starter magnetic only 25 50 60 6 65 819 MO495-6 1SAM560000R1007 2.244 0 60 75 75 65 975 MO495-75 1SAM560000R1008 2.247 0 75 100 90 65 1170 MO495-90 1SAM560000R1009 2.269 40 75 100 100 65 125 MO495-100 1SAM560000R1010 2.292 MO496 manual motor starter magnetic only 10 25 0 2 65 416 MO496-2 1SAM590000R1004 2.208 15 0 40 40 65 520 MO496-40 1SAM590000R1005 2.218 20 40 50 50 65 650 MO496-50 1SAM590000R1006 2.218 25 50 60 6 65 819 MO496-6 1SAM590000R1007 2.248 0 60 75 75 65 975 MO496-75 1SAM590000R1008 2.278 0 75 100 90 65 1170 MO496-90 1SAM590000R1009 2.266 40 75 100 100 65 125 MO496-100 1SAM590000R1010 2.29 1) For overload protection of motors, an appropriate thermal or electronic overload relay must be used. 2CDC241021F0011 MO496-100 Main dimensions mm, inches 101.2 (4P).98 96.78 8.1 1.5 8.27 78.07 12 0.47" 2 0.91" 8 0.1" 25 25 25 0.98 0.98 0.98 70 2.76 4 10 5.12 65 2.56 1 0.04 1 0.04 1 0.04 1.1Nm 14 0.55 41 1.61 16 0.6 45 1.77 165 6.50" 155 6.10" 45 1.77" 116 4.57" 150 5.91" 45 1.77 71 2.8 76.2 (P).0 0.12 1 0.04 101.97 1 2 0.08 1SDC21000HF0001 0 1.18" 70 2.56" 5 0.20" 7 0.28" 12 5.20" 15 6.02" 169 6.65" 2CDC242016F0011 MO5100 MO495, MO496 US Catalog Motor Protection and Control 2/7

Technical data MO5100, MO495, MO496 manual motor starters magnetic only 2 Main circuit Utilization characteristics according to IEC/EN Type MO5100 MO495, MO496 Standards IEC/EN 60947-2 IEC/EN 60947 2, IEC/EN 60947-4-1, IEC/EN 60947-1 Rated operational voltage U e 690 V AC / 500 V DC 690 V AC / 450 V DC Rated frequency 50/60 Hz 50/60 Hz Number of poles Duty time - 100% Mechanical durability 25000 cycles 50000 cycles Electrical durability 8000 cycles 25000 cycles Rated impulse withstand voltage U imp 6 kv 6 kv Rated insulation voltage U i 690 V AC 690 V AC Rated operational current I e See ordering details Rated instantaneous short-circuit current setting I i See ordering details Rated service short-circuit breaking capacity I cs See table "Short-circuit breaking capacity and back-up fuses" Rated ultimate short-circuit breaking capacity I cu See table "Short-circuit breaking capacity and back-up fuses" Short-circuit breaking capacity and back-up fuses l CS l CU I CC Rated service short-circuit breaking capacity Rated ultimate short-circuit breaking capacity Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if I CC > I CS Type 240 V AC 400 V AC 440 V AC 500 V AC 690 V AC I CS ka I CU ka gg, am A I CS ka I CU ka gg, am A I CS ka I CU ka gg, am A I CS ka I CU ka gg, am A I CS ka Short-circuit protection MO5100 MO5100-70 48.75 65-6 6-18 6-11 22-4.5 6 - MO5100-80 48.75 65-6 6-18 6-11 22-4.5 6 - MO5100-100 48.75 65-6 6-18 6-11 22-4.5 6 - I CU ka gg, am A Short-circuit protection MO495 MO495-6 25 50 160 20 50 160 6 12 160 6 80 MO495-75 No back-up fuse required up to 25 50 160 20 50 160 6 8 160 5 100 MO495-90 I CC = 100 ka 25 50 160 20 50 160 6 8 160 5 125 MO495-100 25 50 160 20 50 160 6 8 160 5 125 MO495-100: No need for back-up fuse in networks with a prospective current of up to 50 ka at 400 V. With an approbiate 160 A type gg fuse the device can be used in a network with a prospective current of up to 100 ka. Short-circuit protection MO496 MO496-2 50 100 50 100 No back-up 11 22 100 7 12 6 fuse required MO496-40 50 100 50 100 up to 9 18 160 6 12 80 No backup fuse 50 100 7.5 15 160 5 10 100 I CC = 100 ka MO496-50 50 100 No back-up fuse required up to MO496-6 50 100 required 50 70 200 7.5 15 160 4 7.5 100 I CC = 100 ka MO496-75 50 100 up to I CC = 50 70 200 5 10 160 6 125 100 ka MO496-90 50 100 50 70 200 5 10 160 6 160 MO496-100 50 100 50 70 200 5 10 160 6 160 MO496-2: No need for back-up fuse in networks with a prospective current of up to 100 ka at 440 V. MO496-90: No need for back-up fuse in networks with a prospective current of up to 70 ka at 440 V. With an approbiate 200 A type gg fuse the device can be used in a network with a prospective current of up to 100 ka. 2/8 Motor Protection and Control US Catalog

Technical data MO5100, MO495, MO496 manual motor starters magnetic only Main circuit Utilization characteristics according to UL/CSA Type MO5100 MO495, MO496 Standards UR (UL recognized) UL 508, CSA 22.2 No. 14 Maximum operational voltage 480 V - 600 V Y / 47 V 600 V AC Manual motor controller ratings See table "UL 508 Manual motor controller" See table "UL 508 Manual motor controller" Trip rating 10% of magentic setting 125 % FLA Motor ratings Horsepower See table "Motor ratings, three-phase" See table "Motor ratings, three-phase" Full Load Amps (FLA) See table "Motor ratings, three-phase" See table "Motor ratings, three-phase" 2 Motor ratings, three-phase hp FLA Horsepower Full Load Amps Type General purpose rating Full Load Amps 200-208 V AC 20 V AC 460 V AC 575 V AC at max. 600 V AC A FLA hp hp hp hp MO5100-70 70 70 20 25 50 - MO5100-80 80 80 25 25 60 - MO5100-100 100* 100 0 0 75 - MO495-6 6 6 20 25 50 60 MO495-75 75 75 25 25 60 75 MO495-90 90 90 0 0 75 100 MO495-100 100 100 40 40 75 100 MO496-2 2 2 10 10 25 0 MO496-40 40 40 15 15 0 40 MO496-50 50 50 15 20 40 50 MO496-6 6 6 20 25 50 60 MO496-75 75 75 25 25 60 75 MO496-90 90 90 0 0 75 100 MO496-100 100 100 0 40 75 100 UL 508 Manual motor controller Type Circuit breaker or class R fuse per UL/NEC Max. circuit breaker or fuse per UL/NEC 480/600 V 480/600 V A A Maximum short-circuit current for motor disconnect for group installation 480 V 600 V 480 V ka ka ka MO5100-70 - - 65 25 - - MO5100-80 - - 65 25 - - MO5100-100 - - 65 25 - - MO495-6 60 500 65 0 65 0 MO495-75 250 500 65 0 65 0 MO495-90 00 500 65 0 65 0 MO495-100 50 500 65 10 65 10 MO496-2 120 500 65 0 65 0 MO496-40 160 500 65 0 65 0 MO496-50 200 500 65 0 65 0 MO496-6 250 500 65 0 65 0 MO496-75 00 500 65 0 65 0 MO496-90 50 500 65 10 65 10 MO496-100 400 500 65 10 65 10 600 V ka US Catalog Motor Protection and Control 2/9

Technical data MO5100, MO495, MO496 manual motor starters magnetic only 2 General technical data Type MO5100 MO495 MO496 Pollution degree Phase loss sensitivity - Disconnect function acc. to IEC/EN 60947-2 Yes Yes Ambient air temperature Operation Open - compensated - -20... +60 C Open -25... +70 C -20... +70 C (above 60 C, current derating) Enclosed -25... +70 C -20... +5 C Storage -40... +70 C -50... +80 C Ambient air temperature compensation - - Maximum operating altitude permissible 2000 m 2000 m Resistance to shock acc. to IEC 60068-2-27 12g / 11 ms 25g / 11 ms Resistance to vibrations acc. to IEC 60068-2-6 0.7g / 1... 100 Hz - Mounting position Horizontal, vertical, or lying Position 1-6 (optional for single mounting) down position Mounting - DIN-rail 15 mm / 75 mm (EN 60715) Minimum distance to other units Horizontal 0 mm 0 mm same type Vertical - up to 240 V 50 mm Vertical - up to 440 V 70 mm Vertical - up to 500 V 110 mm Vertical - up to 690 V 150 mm Vertical - Minimum distance to Horizontal See "Insulation distances for - electrical conductive board Horizontal - up to 500 V installation in metallic cubicles" 10 mm Horizontal - up to 690 V 0 mm Vertical - up to 240 V 50 mm Vertical - up to 440 V 70 mm Vertical - up to 500 V 110 mm Vertical - up to 690 V 150 mm Vertical - Degree of protection Housing IP40 (on the lever) IP20 Main circuit terminals IP00 IP20 Insulation distances for installation in metallic cubicles Manual motor starter A B C mm/in mm/in mm/in MO5100 imm_a MO5100, insulation distances 2/40 Motor Protection and Control US Catalog

Technical data MO5100, MO495, MO496 manual motor starters magnetic only Connecting characteristics Main circuit Type MO495 MO496 Connecting capacity Rigid 1 or 2 x 2.5... 16 mm² 2.5... 16 mm² Flexible with ferrule 1 x 2 x 10... 70 mm² 10... 50 mm² 10... 70 mm² 10... 50 mm² Flexible 1 x 2 x 10... 70 mm² 10... 50 mm² 10... 70 mm² 10... 50 mm² Stranded acc. to UL/CSA 1 x 2 x AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 Flexible acc. to UL/CSA 1 x 2 x AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 Stripping length 17 mm 17 mm Tightening torque 4-6 Nm / 5-5 Ib.in 4-6 Nm / 5-5 Ib.in Recommended screw driver Hexagon 4 Hexagon 4 2 Front terminals - F (UL Listed) Type MS5100 Vers. F Busbar dimensions W min 1 mm W max 16 mm H 7.5 mm Ø 6.5 mm D min.5 mm D max 5 mm Cable terminals W 16 mm Ø 6.5 mm Tightening torque 6 Nm / 5.1 Ib.in Recommended screw driver M6 Front terminal - F F terminal with cable lug F terminal with busbar US Catalog Motor Protection and Control 2/41

Main accessories MS5100, MO5100 manual motor starters Description 2 AUX-C SOR-C XT AUX-Con cavi-01 XT SOR-Con cavi-01 Manual motor starters can be equipped with auxiliary contacts, undervoltage release and shunt trips. Undervoltage release are used for remote tripping of the manual motor starter especially for emergency stop circuits. Shunt trips release the MMS used for remote tripping. For this manual motor starter range we also offer key lock solutions for customer applications. Ordering details Suitable for Auxiliary contacts N.O. Auxiliary contacts N.C. Description Catalog number Global code Pkg qty Auxiliary contacts - mountable inside the breaker on the left slot (cabled version) MS5100, Changeover AUX-C 1Q+1SY 250V AC 1SDA06641R1 2 0.06 MO5100 Changeover AUX-C 2Q+1SY 250V AC 1SDA0664R1 0.09 MS5100 Changeover AUX-C 2Q+2SY+1SA 250V AC 1SDA06648R1 5 0.15 Changeover AUX-C Q+1SY 250V AC 1SDA06644R1 4 0.12 Changeover AUX-C Q+2SY 250V AC 1SDA06646R1 5 0.15 MO5100 Changeover AUX-C 1Q+1SY 24V DC 1SDA066446R1 2 0.06 pcs Weight (1 pc) kg KLC Ronis 1SDC210C86F0001 Suitable for Rated control supply voltage Description Catalog number Global code Pkg qty V pcs kg Weight (1 pc) Shunt trips units - mountable inside the breaker on the left slot (cabled version) MS5100, Normally NON energized SOR-C 12V DC 1SDA06621R1 1 0.14 MO5100 Normally NON energized SOR-C 24-0V AC/DC 1SDA06622R1 1 0.14 Normally NON energized SOR-C 48-60V AC/DC 1SDA0662R1 1 0.14 Normally NON energized SOR-C 110-127V AC / 110-125V DC 1SDA06624R1 1 0.14 Normally NON energized SOR-C 220-240V AC / 220-250V DC 1SDA06625R1 1 0.14 Normally NON energized SOR-C 80-440V AC 1SDA06626R1 1 0.14 Normally NON energized SOR-C 480-525V AC 1SDA06627R1 1 0.14 Undervoltages releases - mountable inside the breaker on the left slot (cabled version) MS5100, Normally energized UVR-C 24-0V AC/DC 1SDA06696R1 1 0.14 MO5100 Normally energized UVR-C 48V AC/DC 1SDA060965R1 1 0.14 Normally energized UVR-C 60V AC/DC 1SDA06697R1 1 0.14 Normally energized UVR-C 110-127V AC / 110-125V DC 1SDA06698R1 1 0.14 Normally energized UVR-C 220-240V AC / 220-250V DC 1SDA06699R1 1 0.14 Normally energized UVR-C 80-440V AC 1SDA066400R1 1 0.14 Normally energized UVR-C 480-525V AC 1SDA066401R1 1 0.14 Suitable for Description Catalog number Global code Pkg qty pcs Weight (1 pc) kg Key locks MS5100 MO5100 Key lock on the circuit breaker, different keys, removable in open position Key lock on the circuit breaker, different keys, removable in open position KLC Ronis 1) 1SDA066599R1 1 NA KLC Ronis 1) 1SDA06659R1 1 NA 1) UL Listed 2/42 Motor Protection and Control US Catalog

Main accessories MS49x, MO49x manual motor starters Manual motor starter MS49x with accessories MS45x UA4-HK 2 UA4/AA4 HKS4 MS49x HK4 SK4 SK4 HKS4 2CDC242025F0011 Manual motor starter MO49x with accessories MO45x UA4-HK UA4/AA4 HKS4 MO49x HK4 SK4 SK4 HKS4 2CDC242007F001 US Catalog Motor Protection and Control 2/4

Main accessories MS49x, MO49x manual motor starters 2 HK4-11 2CDC241026F0011 Description Manual motor starters can be equipped with auxiliary contacts for lateral/front mounting, signalling contact for lateral mounting, undervoltage release and shunt trips. The accessories can be fitted wiring free and without tools. A variety of combinations is possible as required for the application. The auxiliary contacts change position with the main contacts. Undervoltage release are used for remote tripping of the manual motor starter especially for emergency stop circuits. Shunt trips release the MMS used for remote tripping. For this manual motor starter range we offer terminal shrouds, terminal insulation barriers and different lock/key solutions for customer solutions. Ordering details 2CDC241022F0011 Suitable for Auxiliary contacts N.O. Auxiliary contacts N.C. Description Catalog number Global code Pkg qty pcs Weight (1 pc) kg HKS4-20 Auxiliary contacts mountable on the front MS49x, 1 1 HK4-11 1SAM401901R1001 10 0.017 MO49x Changeover HK4-W 1SAM401901R1002 10 0.015 Auxiliary contacts mountable on the left MS49x, 1 1 Max. 1 piece HKS4-11 1SAM401902R1001 2 0.045 MO49x 2 0 Max. 1 piece HKS4-20 1SAM401902R1002 2 0.045 0 2 Max. 1 piece HKS4-02 1SAM401902R100 2 0.045 SK4-11 2CDC241024F0011 Signalling contacts mountable on the left MS49x, MO49x 2 2 Separate signalling acc. UL508E 1 N.O. + 1 N.C. for short circuit alarm and 1 N.O. + 1 N.C. for tripped alarm, max. 1x SK4-11 + 1 x HKS4-xx SK4-11 1SAM401904R1001 1 0.09 Suitable for Rated control supply voltage Frequency Catalog number Global code Pkg qty Weight (1 pc) V Hz pcs kg 2CDC24102F0011 Shunt trip units mountable on the right MS49x, 20... 24 50/60 AA4-24 1SAM401907R1001 1 0.15 MO49x 90... 110 50/60 UA4-120 1SAM401907R1002 1 0.15 200... 240 50/60 AA4-240 1SAM401907R100 1 0.128 50... 415 50/60 AA4-400 1SAM401907R1004 1 0.125 AA4-24 Undervoltage releases mountable on the right MS49x, 24 50/60 UA4-24 1SAM401905R1004 1 0.14 MO49x 110/120 50/60 UA4-110 1SAM401905R1001 1 0.14 20/240 50/60 UA4-240 1SAM401905R1002 1 0.11 400/440 50/60 UA4-400 1SAM401905R100 1 0.129 20/240 50/60 UA4-HK-20 1SAM401906R1001 1 0.140 400/440 50/60 UA4-HK-400 1SAM401906R1002 1 0.17 UA4-110 2CDC241025F0011 2CDC24102F001 Suitable for Description Catalog number Global code Pkg qty Weight (1 pc) pcs kg MS495, MS497, Terminal shroud KA495 1SAM501901R1001 10 0.018 MO495, MO496 Terminal shroud KA495C 1) 1SAM501902R1001 10 0.08 Terminal insulation barrier for DX495 1SAM401912R1001 1 0.154 UL508E MS495, MS497, MO495, MO496 Padlock + two keys SA2 GJF110190R0002 10 0.020 1) Is plugged onto the housing after removing the box terminals, if using cable lugs. SA2 2/44 Motor Protection and Control US Catalog

Main accessories MS49x, MO49x manual motor starters General technical data Type HK4-11 HK4-W HKS4 SK4 Standards IEC/EN 60947 1, IEC/EN 60947-5-1, UL 508, CSA22.2 No. 14 Rated operational voltage U e 20 V AC / 220 V DC 690 V AC / 220 V DC 690 V AC 690 V AC Conventional free-air thermal current I th 2.5 A 5 A 10 A 10 A Rated frequency DC, 50/60 Hz Rated impulse withstand voltage U imp 6 kv Rated insulation voltage U i 00 V 00 V 690 V 690 V Pollution degree Ambient air temperature Operation -20... +70 C Storage -50... +80 C Resistance to shock acc. to IEC 60068-2-27 25g / 11 ms Resistance to vibrations acc. to IEC 60068-2-6 2g / 5... 150 Hz Number of poles 1 N.C. + 1 N.O. Changeover 1 N.C. + 1 N.O. / 2 N.C. + 2 N.O. 2 N.O. / 2 N.C. I e / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 24 V 2 A 4 A 6 A 6 A 20 V 0.5 A A 4 A 4 A 400 V - 1.5 A A A 690 V - 0.5 A 1 A 1 A I e / Rated operational current DC-1 acc. to IEC/EN 60947-5-1 for utilization category 24 V 1 A 1 A 2 A 2 A 48 V 0. A - - - 60 V 0.15 A - - - 110 V - 0.22 A 0.5 A 0.5 A 20 V - 0.1 A 0.25 A 0.25 A Minimum switching capacity 17 V / 1 ma - - Short-circuit protective device 10 A Type gg Duty time 100 % Mounting Front of MMS Front of MMS Left side of MMS Left side of MMS Mounting positions 1-6 Mechanical durability 100000 cycles Electrical durability 100000 cycles 2 Type UA4-xxx AA4-xxx Power consumption Pull-in AC 20.2/1 VA/W 20.2/1 VA/W DC 20 W 1 80 W Holding AC 7.2/2.4 VA/W - DC 2.1 W - Operating voltage Tripping 0.5 0.7 V x U s 0.7 1.1 V x U s Coil operating voltage 0.85 1.1 V x U s - US Catalog Motor Protection and Control 2/45

Main accessories MS49x, MO49x manual motor starters 2 Connecting characteristics Auxiliary circuit Type HK4-11 HK4-W HKS4 SK4 Connecting capacity Rigid 1 x 2 x 0.5... 2.5 mm² 0.5... 1.5 mm² or 0.75... 2.5 mm Flexible with ferrule 1 x 2 x 0.5... 2.5 mm² 0.5... 1.5 mm² or 0.75... 2.5 mm Flexible 1 x 2 x 0.5... 2.5 mm² 0.5... 1.5 mm² or 0.75... 2.5 mm Stranded acc. to UL/CSA 1 or 2 x AWG 18-14 Flexible acc. to UL/CSA 1 or 2 x AWG 18-14 Stripping length 10 mm Tightening torque 0.8... 1.2 Nm / 7... 10. Ib.in Recommended screw driver Pozidriv 2 2/46 Motor Protection and Control US Catalog

General accessories MS1xx, MO1xx, MS5100, MO5100, MS49x, MO49x 2CDC24100F0011 Description With this solution of door coupling rotary mechanism it is possible to operate a manual motor starter in the back of a switch cabinet from outside. The door coupling mechanism prevents opening of the door of a switch cabinet with the manual motor starter in ON position. The complete mechanism includes handle, shaft, driver, shaft alignment ring and shaft supporter. Most accessories fit for 6 mm shafts with a maximum length of 180 mm. The degree of protection for handles MSHD is IP64 (UL/CSA Type 1, R, 12). 2 MSHD-LB Ordering details Suitable Description for Shaft Color Catalog number Global code Pkg Weight length qty (1 pc) mm pcs kg MSHD-LY 2CDC241002S0011 Shafts MS116, MS12, MO12, MS165, MO165, MS4xx, MO4xx For MSHD handles. Shaft diameter 6 mm. Shaft extension for door coupling driver. 85 OXS6X85 1SCA101647R1001 1 0.020 105 OXS6X105 1SCA10804R1001 1 0.020 10 OXS6X10 1SCA101655R1001 1 0.00 180 OXS6X180 1SCA101659R1001 1 0.040 1SAM10192R0002 2CDC241004F0011 IP64 handles (UL/CSA Type 1, R, 12) MS116, Padlockable max. padlocks with MS12, bail diameter 5 8 mm, door interlock in ON position defeatable, for MO12, MS165, use with 6 mm OXS6 types up to MO165, 180 mm or driver shafts MSOX. MS4xx, MO4xx Black MSHD-LB 1) 1SAM201920R1001 1 0.065 Yellow MSHD-LY 1) 1SAM201920R1002 1 0.065 Black MSHD-LTB 2) 1SAM201920R1011 1 0.065 Yellow MSHD-LTY 2) 1SAM201920R1012 1 0.065 MSH-AR 2CDC241001F0012 Driver MS116, MS12, MO12, MS165, MO165, MS4xx, MO4xx Coupling driver for use with 6 mm OXS6 types up to 180 mm. 1SAM10192R0002 ) 1SAM10192R0002 1 0.002 1SAM10192R0012 4) 1SAM10192R0012 1 0.002 MSAH1 2CDC241017V001 Shaft alignment ring MS116, The MSH-AR supports the long MS12, shafts for alignment to the handle MO12, inlet. It makes closing panel doors MS165, more easy. Use for OXS6X > 105 MO165, mm. MS4xx, MO4xx Shaft supporter MS116, With the MSAH it is possible to MS12, support the shaft in the extension of MO12 handle (MSHD). It is mandatory for the usage of shafts >10 mm. MSH-AR 1SAM201920R1000 1 0.010 MSAH1 1SAM201909R1021 1 0.05 Rotary handle operating mechanism MS5100 Rotary handle operating mechanism RHD Normal Direct 1SDA06905R1 1 0.4 Handle 5) MO5100 Rotary handle operating mechanism RHD Normal Direct 1SDA066475R1 1 0.4 Handle 5) 1) Indication I-O and ON-OFF (recommended for MS116, MS4xx, MO4xx) RHD Normal Direct Handle RHD-01 2) Indication I-O and ON-OFF + Trip indication ) Coded - Positioning of ON indication dependent from mounting orientation of the MMS 4) Uncoded - Positioning of ON indication independent from mounting orientation of the MMS 5) UL Listed US Catalog Motor Protection and Control 2/47

General accessories MS1xx, MO1xx, MS4xx, MO4xx 2 1) MSAH1 1SAM10192R0002 MSMNO OXS6X MSH-AR 1) MSAH1 fits to MS116,MS12 and MO12 MSHD 2CDC242022F001 2/48 Motor Protection and Control US Catalog

Notes 2 US Catalog Motor Protection and Control 2/49

B mini contactors K mini contactor relays With screw terminals -pole contactors B6, B7 AC operated /4 BC6, BC7, B7D DC operated /5 -pole reversing contactors VB6, VB7 AC operated /6 VBC6, VBC7 DC operated /7 VB6A, VB7A AC operated /8 VBC6A, VBC7A DC operated /9 -pole interface contactors BC6, BC7, B6S, B7S DC operated /10 -pole contactors - large coil voltage range TBC7 DC operated /11 4-pole contactors B6, B7 AC operated /12 BC6, B7D DC operated /1 4-pole contactors - large coil voltage range TBC7 DC operated /14 Contactor relays K6 AC operated /15 KC6 DC operated /16 Interface contactor relays KC6, K6S DC operated /17 Contactor relays - large coil voltage range TKC6 DC operated /18 With soldering pins -pole contactors B6, B7 AC operated /19 BC6, BC7 DC operated /20 -pole reversing contactors VB6, VB7 AC operated /21 VBC6, VBC7 DC operated /22 VB6A, VB7A AC operated /2 VBC7A DC operated /24 Contactor relays K6 AC operated /25 KC6 DC operated /26 -pole interface contactors BC6, BC7 DC operated /27 Interface contactor relays KC6 DC operated /28 With flat pin connection -pole contactors B6, B7 AC operated /29 BC6, BC7 DC operated /0 -pole reversing contactors VB7 AC operated /1 VBC7 DC operated /2 VB7A AC operated / VBC7A DC operated /4 -pole interface contactors BC6, BC7 DC operated /5 Contactor relays K6 AC operated /6 KC6 DC operated /7 Interface contactor relays KC6 DC operated /8 Accessories /9 Technical data /41 US Catalog Motor Protection and Control /1

Mini contactors Screw terminals AC Control supply -pole contactors Coil consumption.5 W Type B6 B7 - - -pole reversing contactors Coil consumption.5 W Type - - VB6 VB6A 2) 4-pole contactors Coil consumption.5 W Type B6 B7 - - VB7 VB7A 2) DC Control supply -pole contactors Coil consumption.5 W Type BC6 BC7 B7D 1) -pole interface contactors Coil consumption 1.4... 2.4 W Type BC6 BC7 - - -pole reversing contactors Coil consumption.5 W Type - - VBC6 VBC6A 2) 4-pole contactors Coil consumption.5 W Type BC6 B7D Wide range types Extended coil voltage and Type - TBC7 temperature PLC types Coil consumption 1.7 W Type B6S 1) B7S 1) VBC7 VBC7A 2) IEC Rated operational power AC- 220-20-240 V kw 2.2 2.2 80-400 V kw 4 5.5 4 5.5 Rated operational current AC-1 400 V, θ 40 C A 20 20 20 20 UL/ -phase motor rating 220-240 V AC hp 2 2 CSA 440-480 V AC hp 5 5 General use rating A 12 (00 V) 16 (600 V) 12 (00 V) 16 (600 V) 1) With integrated surge suppressor 2) With safety blocking function Main accessories Auxiliary contact blocks Front mounting CAF6 Side mounting CA6 Connection sets For reversing contactors BSM6-0 Surge suppressors Varistor (AC/DC) RV-BC6 Overload relays Thermal overload relays Class 10 Thermal and phase failure protection, with single setup possible Electronic overload relays Class 10E, 20E, 0E With single setup possible T16 E16DU Manual motor starters Thermal / magnetic protection Class 10 MS116, MS12 Magnetic only types MO12 Connecting link to manual motor starters BEA7/12 Contactor relays AC Control supply Screw terminals 4-pole contactor relays Coil consumption.5 W Type K6 DC Control supply 4-pole contactor relays Coil consumption.5 W Type KC6 4-pole interface contactor relays Coil consumption 1.4... 2.4 W Type KC6 Wide range types Extended coil voltage and temperature Type TKC6 IEC Rated operational current AC-15 220-20-240 V A 4 80-400 V A Rated operational current DC-1 24 V A 2.5 Main accessories Auxiliary contact blocks Front mounting CAF6 Side mounting CA6-11K /2 Motor Protection and Control US Catalog

Soldering pins Flat pins B6...P B7...P - - B6...F B7...F - - - - VB6...P VB6A...P 2) VB7...P - - VB6...F VB7A...P 2) VB6A...F 2) - - - - - - VB7...F VB7A...F 2) - - BC6...F BC7...F - - BC6...P BC7...P B7D...P 1) B7D...F 1) BC6...P BC7...P - - BC6...F BC7...F - - - - VBC6...P VBC6A...P 2) VBC7...P - - VBC6...F VBC7A...P 2) VBC6A...F 2) - - - - VBC7...F VBC7A...F 2) 2.2 2.2 2.2 2.2 4 5.5 4 5.5 4 5.5 4 5.5 12 12 12 12 20 20 20 20 2 2 2 2 5 5 5 5 12 (00 V) 16 (600 V) 12 (00 V) 16 (600 V) 12 (00 V) 16 (600 V) 12 (00 V) 16 (600 V) - - CA6-11K-P CA6-11K-F - - - - - - - - MS116, MS12 MS116, MS12 MO12 MO12 - - Soldering pins Flat pins K6...P K6...F KC6...P KC6...P KC6...F KC6...F 4 4 2.5 2.5 - - CA6-11K-P CA6-11K-F US Catalog Motor Protection and Control /

B6, B7 -pole mini contactors with screw terminals 4 to 5.5 kw AC operated B6-0-10 2CDC211001F0010 Description B6, B7 -pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: main poles and one built-in auxiliary contact control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) add-on auxiliary contact blocks for front or side mounting and a wide range of accessories hum-free coil designed for rail or wall mounting B7-0-10 Ordering details IEC Rated operational power UL/CSA Rated control circuit voltage U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg Pkg qty Weight (1 pce) B6 mini contactors 4 20 00 V / 12 A 24 24 1 0 B6-0-10-01 GJL1211001R0101 10 0.175 0 1 B6-0-01-01 GJL1211001R0011 10 0.175 42 42 1 0 B6-0-10-02 GJL1211001R0102 10 0.175 0 1 B6-0-01-02 GJL1211001R0012 10 0.175 48 48 1 0 B6-0-10-0 GJL1211001R010 10 0.175 0 1 B6-0-01-0 GJL1211001R001 10 0.175 110 127 110 127 1 0 B6-0-10-84 GJL1211001R8104 10 0.175 0 1 B6-0-01-84 GJL1211001R8014 10 0.175 220 240 220 240 1 0 B6-0-10-80 GJL1211001R8100 10 0.175 0 1 B6-0-01-80 GJL1211001R8010 10 0.175 80 415 80 415 1 0 B6-0-10-85 GJL1211001R8105 10 0.175 0 1 B6-0-01-85 GJL1211001R8015 10 0.175 B7 mini contactors 5.5 20 5 600 V / 16 A 24 24 1 0 B7-0-10-01 GJL111001R0101 10 0.175 0 1 B7-0-01-01 GJL111001R0011 10 0.175 42 42 1 0 B7-0-10-02 GJL111001R0102 10 0.175 0 1 B7-0-01-02 GJL111001R0012 10 0.175 48 48 1 0 B7-0-10-0 GJL111001R010 10 0.175 0 1 B7-0-01-0 GJL111001R001 10 0.175 110 127 110 127 1 0 B7-0-10-84 GJL111001R8104 10 0.175 0 1 B7-0-01-84 GJL111001R8014 10 0.175 220 240 220 240 1 0 B7-0-10-80 GJL111001R8100 10 0.175 0 1 B7-0-01-80 GJL111001R8010 10 0.175 80 415 80 415 1 0 B7-0-10-85 GJL111001R8105 10 0.175 0 1 B7-0-01-85 GJL111001R8015 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 2CDC211014F0011 42.2 1.66" 4.5 0.18" 2CDC212001F0011 B6, B7 /4 Motor Protection and Control US Catalog

BC6, BC7, B7D -pole mini contactors with screw terminals 4 to 5.5 kw DC operated BC6-0-10 2CDC211040F0011 Description BC6, BC7, B7D -pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: main poles and one built-in auxiliary contact control circuit: DC operated, low consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front or side mounting and a wide range of accessories designed for rail or wall mounting Ordering details BC7-0-10 2CDC21101F0011 IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty Weight (1 pce) current θ 40 C 400 V AC- AC-1 kw A hp V DC kg BC6 mini contactors 4 20 00 V / 12 A 12 1 0 BC6-0-10-07 GJL121001R0107 10 0.175 0 1 BC6-0-01-07 GJL121001R0017 10 0.175 24 1 0 BC6-0-10-01 GJL121001R0101 10 0.175 0 1 BC6-0-01-01 GJL121001R0011 10 0.175 48 1 0 BC6-0-10-16 GJL121001R1106 10 0.175 0 1 BC6-0-01-16 GJL121001R1016 10 0.175 60 1 0 BC6-0-10-0 GJL121001R010 10 0.175 0 1 BC6-0-01-0 GJL121001R001 10 0.175 110 125 1 0 BC6-0-10-04 GJL121001R0104 10 0.175 0 1 BC6-0-01-04 GJL121001R0014 10 0.175 220 240 1 0 BC6-0-10-05 GJL121001R0105 10 0.175 0 1 BC6-0-01-05 GJL121001R0015 10 0.175 BC7 mini contactors 5.5 20 5 600 V / 16 A 12 1 0 BC7-0-10-07 GJL11001R0107 10 0.175 0 1 BC7-0-01-07 GJL11001R0017 10 0.175 24 1 0 BC7-0-10-01 GJL11001R0101 10 0.175 0 1 BC7-0-01-01 GJL11001R0011 10 0.175 48 1 0 BC7-0-10-16 GJL11001R1106 10 0.175 0 1 BC7-0-01-16 GJL11001R1016 10 0.175 60 1 0 BC7-0-10-0 GJL11001R110 10 0.175 0 1 BC7-0-01-0 GJL11001R001 10 0.175 110 125 1 0 BC7-0-10-04 GJL11001R0104 10 0.175 0 1 BC7-0-01-04 GJL11001R0014 10 0.175 220 240 1 0 BC7-0-10-05 GJL11001R0105 10 0.175 0 1 BC7-0-01-05 GJL11001R0015 10 0.175 B7D mini contactors with integrated suppressor diode 5.5 20 5 600 V / 24 1 0 B7D-0-10-01 GJL117001R0101 10 0.175 16 A 0 1 B7D-0-01-01 GJL117001R0011 10 0.175 220 1 0 B7D-0-10-05 GJL117001R0105 10 0.175 0 1 B7D-0-01-05 GJL117001R0015 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 46.7 1.84" 47.5 1.87" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 BC6, BC7, B7D US Catalog Motor Protection and Control /5

VB6, VB7 -pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated Description VB6, VB7 -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. VB7-0-10 2CDC211006F0011 These reversing contactors are designed with: built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be de-energised for 50 ms at least to prevent phase to phase short circuit on the arc. control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front mounting designed for rail or wall mounting Ordering details IEC Rated operational power UL/CSA Rated control circuit voltage U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg VB6 mini reversing contactors 4 20 00 V / 12 A VB7 mini reversing contactors 5.5 20 5 600 V / 16 A Note: Other types on request Weight (1 pce) 24 24 1 0 VB6-0-10-01 GJL1211901R0101 5 0.55 0 1 VB6-0-01-01 GJL1211901R0011 5 0.55 42 42 1 0 VB6-0-10-02 GJL1211901R0102 5 0.55 0 1 VB6-0-01-02 GJL1211901R0012 5 0.55 48 48 1 0 VB6-0-10-0 GJL1211901R010 5 0.55 0 1 VB6-0-01-0 GJL1211901R001 5 0.55 110 127 110 127 1 0 VB6-0-10-84 GJL1211901R8104 5 0.55 0 1 VB6-0-01-84 GJL1211901R8014 5 0.55 220 240 220 240 1 0 VB6-0-10-80 GJL1211901R8100 5 0.55 0 1 VB6-0-01-80 GJL1211901R8010 5 0.55 80 415 80 415 1 0 VB6-0-10-85 GJL1211901R8105 5 0.55 0 1 VB6-0-01-85 GJL1211901R8015 5 0.55 24 24 1 0 VB7-0-10-01 GJL111901R0101 5 0.55 0 1 VB7-0-01-01 GJL111901R0011 5 0.55 42 42 1 0 VB7-0-10-02 GJL111901R0102 5 0.55 0 1 VB7-0-01-02 GJL111901R0012 5 0.55 48 48 1 0 VB7-0-10-0 GJL111901R010 5 0.55 0 1 VB7-0-01-0 GJL111901R001 5 0.55 110 127 110 127 1 0 VB7-0-10-84 GJL111901R8104 5 0.55 0 1 VB7-0-01-84 GJL111901R8014 5 0.55 220 240 220 240 1 0 VB7-0-10-80 GJL111901R8100 5 0.55 0 1 VB7-0-01-80 GJL111901R8010 5 0.55 80 415 80 415 1 0 VB7-0-10-85 GJL111901R8105 5 0.55 0 1 VB7-0-01-85 GJL111901R8015 5 0.55 Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212005F0011 VB6, VB7 /6 Motor Protection and Control US Catalog

VBC6, VBC7 -pole mini reversing contactors with screw terminals 4 to 5.5 kw DC operated VBC6-0-10 2CDC211042F0011 2CDC211001F0011 Description VBC6, VBC7 -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be de-energised for 50 ms at least to prevent phase to phase short circuit on the arc. control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front mounting designed for rail or wall mounting Ordering details VBC7-0-10 IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) VBC6 mini reversing contactors 4 20 00 V / 12 A 12 1 0 VBC6-0-10-07 GJL121901R0107 5 0.55 0 1 VBC6-0-01-07 GJL121901R0017 5 0.55 24 1 0 VBC6-0-10-01 GJL121901R0101 5 0.55 0 1 VBC6-0-01-01 GJL121901R0011 5 0.55 48 1 0 VBC6-0-10-16 GJL121901R1106 5 0.55 0 1 VBC6-0-01-16 GJL121901R1016 5 0.55 60 1 0 VBC6-0-10-0 GJL121901R010 5 0.55 0 1 VBC6-0-01-0 GJL121901R001 5 0.55 110... 125 1 0 VBC6-0-10-04 GJL121901R0104 5 0.55 0 1 VBC6-0-01-04 GJL121901R0014 5 0.55 220 240 1 0 VBC6-0-10-05 GJL121901R0105 5 0.55 0 1 VBC6-0-01-05 GJL121901R0015 5 0.55 VBC7 mini reversing contactors 5.5 20 5 600 V / 16 A 12 1 0 VBC7-0-10-07 GJL11901R0107 5 0.55 0 1 VBC7-0-01-07 GJL11901R0017 5 0.55 24 1 0 VBC7-0-10-01 GJL11901R0101 5 0.55 0 1 VBC7-0-01-01 GJL11901R0011 5 0.55 48 1 0 VBC7-0-10-16 GJL11901R1106 5 0.55 0 1 VBC7-0-01-16 GJL11901R1016 5 0.55 60 1 0 VBC7-0-10-0 GJL11901R010 5 0.55 0 1 VBC7-0-01-0 GJL11901R001 5 0.55 110... 125 1 0 VBC7-0-10-04 GJL11901R0104 5 0.55 0 1 VBC7-0-01-04 GJL11901R0014 5 0.55 220 240 1 0 VBC7-0-10-05 GJL11901R0105 5 0.55 0 1 VBC7-0-01-05 GJL11901R0015 5 0.55 Note: Other types on request Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212005F0011 VBC6, VBC7 US Catalog Motor Protection and Control /7

VB6A, VB7A -pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated with safety blocking function VB6A-0-10 2CDC21107F0011 2CDC211008F0011 Description VB6A, VB7A -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front mounting designed for rail or wall mounting VB7A-0-10 Ordering details IEC UL/CSA Rated control circuit Rated operational voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg Weight (1 pce) VB6A mini reversing contactors with safety blocking function 4 20 00 V / 24 24 1 0 VB6A-0-10-01 GJL1211911R0101 5 0.55 12 A 0 1 VB6A-0-01-01 GJL1211911R0011 5 0.55 42 42 1 0 VB6A-0-10-02 GJL1211911R0102 5 0.55 0 1 VB6A-0-01-02 GJL1211911R0012 5 0.55 48 48 1 0 VB6A-0-10-0 GJL1211911R010 5 0.55 0 1 VB6A-0-01-0 GJL1211911R001 5 0.55 110 127 110 127 1 0 VB6A-0-10-84 GJL1211911R8104 5 0.55 0 1 VB6A-0-01-84 GJL1211911R8014 5 0.55 220 240 220 240 1 0 VB6A-0-10-80 GJL1211911R8100 5 0.55 0 1 VB6A-0-01-80 GJL1211911R8010 5 0.55 80 415 80 415 1 0 VB6A-0-10-85 GJL1211911R8105 5 0.55 0 1 VB6A-0-01-85 GJL1211911R8015 5 0.55 VB7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 24 24 1 0 VB7A-0-10-01 GJL111911R0101 5 0.55 16 A 0 1 VB7A-0-01-01 GJL111911R0011 5 0.55 42 42 1 0 VB7A-0-10-02 GJL111911R0102 5 0.55 0 1 VB7A-0-01-02 GJL111911R0012 5 0.55 48 48 1 0 VB7A-0-10-0 GJL111911R010 5 0.55 0 1 VB7A-0-01-0 GJL111911R001 5 0.55 110 127 110 127 1 0 VB7A-0-10-84 GJL111911R8104 5 0.55 0 1 VB7A-0-01-84 GJL111911R8014 5 0.55 220 240 220 240 1 0 VB7A-0-10-80 GJL111911R8100 5 0.55 0 1 VB7A-0-01-80 GJL111911R8010 5 0.55 80 415 80 415 1 0 VB7A-0-10-85 GJL111911R8105 5 0.55 0 1 VB7A-0-01-85 GJL111911R8015 5 0.55 Note: Other types on request Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" VB6A, VB7A 4.5 0.18" 2CDC212005F0011 /8 Motor Protection and Control US Catalog

VBC6A, VBC7A -pole mini reversing contactors with screw terminals 4 to 5.5 kw DC operated with safety blocking function VBC6A-0-10 2CDC211044F0011 2CDC211007F0011 Description VBC6A, VBC7A -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front mounting designed for rail or wall mounting VBC7A-0-10 Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) VBC6A mini reversing contactors with safety blocking function 4 20 00 V / 12 1 0 VBC6A-0-10-07 GJL121911R0107 5 0.55 12 A 0 1 VBC6A-0-01-07 GJL121911R0017 5 0.55 24 1 0 VBC6A-0-10-01 GJL121911R0101 5 0.55 0 1 VBC6A-0-01-01 GJL121911R0011 5 0.55 48 1 0 VBC6A-0-10-16 GJL121911R1106 5 0.55 0 1 VBC6A-0-01-16 GJL121911R1016 5 0.55 60 1 0 VBC6A-0-10-0 GJL121911R010 5 0.55 0 1 VBC6A-0-01-0 GJL121911R001 5 0.55 110... 125 1 0 VBC6A-0-10-04 GJL121911R0104 5 0.55 0 1 VBC6A-0-01-04 GJL121911R0014 5 0.55 220 240 1 0 VBC6A-0-10-05 GJL121911R0105 5 0.55 0 1 VBC6A-0-01-05 GJL121911R0015 5 0.55 VBC7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 12 1 0 VBC7A-0-10-07 GJL11911R0107 5 0.55 16 A 0 1 VBC7A-0-01-07 GJL11911R0017 5 0.55 24 1 0 VBC7A-0-10-01 GJL11911R0101 5 0.55 0 1 VBC7A-0-01-01 GJL11911R0011 5 0.55 48 1 0 VBC7A-0-10-16 GJL11911R1106 5 0.55 0 1 VBC7A-0-01-16 GJL11911R0016 5 0.55 60 1 0 VBC7A-0-10-0 GJL11911R010 5 0.55 0 1 VBC7A-0-01-0 GJL11911R001 5 0.55 110... 125 1 0 VBC7A-0-10-04 GJL11911R0104 5 0.55 0 1 VBC7A-0-01-04 GJL11911R0014 5 0.55 220 240 1 0 VBC7A-0-10-05 GJL11911R0105 5 0.55 0 1 VBC7A-0-01-05 GJL11911R0015 5 0.55 Note: Other types on request Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212005F0011 VBC6A, VBC7A US Catalog Motor Protection and Control /9

BC6, BC7 -pole interface mini contactors with screw terminals 4 to 5.5 kw DC operated BC6-0-10 2CDC211040F0011 Description BC6, BC7 -pole interface mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: main poles and one built-in auxiliary contact control circuit: DC operated, very low coil consumption. Suitable for direct control by PLC outputs hum-free coil no auxiliary contact block permitted for mounting designed for rail or wall mounting BC7-0-10 Ordering details IEC Rated operational power UL/CSA Rated control circuit voltage U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) DC operation 24 V / 1.4 W 4 20 00 V / 12 A 5.5 20 5 600 V / 16 A DC operation 17 2 V / 2.4 W 4 20 00 V / 12 A 5.5 20 5 600 V / 16 A 24 1 0 BC6-0-10-1.4 GJL121001R8101 10 0.175 0 1 BC6-0-01-1.4 GJL121001R8011 10 0.175 24 1 0 BC7-0-10-1.4 GJL11001R8101 10 0.175 0 1 BC7-0-01-1.4 GJL11001R8011 10 0.175 17... 2 1 0 BC6-0-10-2.4 GJL121001R5101 10 0.175 0 1 BC6-0-01-2.4 GJL121001R5011 10 0.175 17... 2 1 0 BC7-0-10-2.4 GJL11001R5101 10 0.175 0 1 BC7-0-01-2.4 GJL11001R5011 10 0.175 Connection to PLCs with integrated protective circuit DC operation 24 V / 1.7 W 4 20 00 V / 12 A 5.5 20 5 600 V / 16 A DC operation 17 2 V / 2.8 W 4 20 00 V / 12 A 5.5 20 5 600 V / 16 A 24 1 0 B6S-0-10-1.7 GJL121001R7101 10 0.175 0 1 B6S-0-01-1.7 GJL121001R7011 10 0.175 24 1 0 B7S-0-10-1.7 GJL11001R7101 10 0.175 0 1 B7S-0-01-1.7 GJL11001R7011 10 0.175 17... 2 1 0 B6S-0-10-2.8 GJL121001R7102 10 0.175 0 1 B6S-0-01-2.8 GJL121001R7012 10 0.175 17... 2 1 0 B7S-0-10-2.8 GJL11001R7102 10 0.175 0 1 B7S-0-01-2.8 GJL11001R7012 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 2CDC21101F0011 4.5 0.18" 2CDC212001F0011 BC6, BC7 /10 Motor Protection and Control US Catalog

TBC7 -pole mini contactors with screw terminals 4 to 5.5 kw DC operated large coil voltage range TBC7-0-10 2CDC211015F0011 Description TBC7 -pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: main poles and one built-in auxiliary contact control circuit: DC operated low coil consumption (5 W at pull-in and at holding) hum-free coil expanded ambient temperature range -0 +70 C and wide range voltage supply no auxiliary contact block permitted for mounting designed for rail or wall mounting material is approved for railway applications Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U Cmin... U Cmax -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) TBC7 mini contactors 5.5 20 5 600 V / 16 A 17... 2 1 0 TBC7-0-10-51 GJL11061R5101 10 0.185 0 1 TBC7-0-01-51 GJL11061R5011 10 0.185 50... 90 1 0 TBC7-0-10-55 GJL11061R5105 10 0.185 0 1 TBC7-0-01-55 GJL11061R5015 10 0.185 77... 14 1 0 TBC7-0-10-62 GJL11061R6102 10 0.185 0 1 TBC7-0-01-62 GJL11061R6012 10 0.185 140... 260 1 0 TBC7-0-10-68 GJL11061R6108 10 0.185 0 1 TBC7-0-01-68 GJL11061R6018 10 0.185 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 TBC7 US Catalog Motor Protection and Control /11

B6, B7 4-pole mini contactors with screw terminals 4 to 5.5 kw AC operated B6-22-00 2CDC211028F0011 Description B6, B7 4-pole mini contactors are compact control products mainly used for switching resistive loads up to 690 V AC. These contactors are designed with: 4 main poles control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) add-on auxiliary contact blocks for front or side mounting and a wide range of accessories hum-free coil designed for rail or wall mounting Ordering details IEC UL/CSA Rated control Rated operational General use circuit voltage current rating U C θ 40 C 50/60 Hz AC-1 Auxiliary contacts fitted Catalog number Global code Pkg qty Weight (1 pce) A V AC kg 4 N.O. main poles 20 00 V / 12 A 24 0 0 B6-40-00-01 GJL1211201R0001 10 0.175 42 0 0 B6-40-00-02 GJL1211201R0002 10 0.175 48 0 0 B6-40-00-0 GJL1211201R000 10 0.175 110... 127 0 0 B6-40-00-84 GJL1211201R8004 10 0.175 220... 240 0 0 B6-40-00-80 GJL1211201R8000 10 0.175 20 600 V / 16 A 24 0 0 B7-40-00-01 GJL111201R0001 10 0.175 42 0 0 B7-40-00-02 GJL111201R0002 10 0.175 48 0 0 B7-40-00-0 GJL111201R000 10 0.175 110... 127 0 0 B7-40-00-84 GJL111201R8004 10 0.175 220... 240 0 0 B7-40-00-80 GJL111201R8000 10 0.175 2 N.O. + 2 N.C. main poles 20 00 V / 12 A 24 0 0 B6-22-00-01 GJL1211501R0001 10 0.175 42 0 0 B6-22-00-02 GJL1211501R0002 10 0.175 48 0 0 B6-22-00-0 GJL1211501R000 10 0.175 110... 127 0 0 B6-22-00-84 GJL1211501R8004 10 0.175 220... 240 0 0 B6-22-00-80 GJL1211501R8000 10 0.175 20 600 V / 16 A 24 0 0 B7-22-00-01 GJL111501R0001 10 0.175 42 0 0 B7-22-00-02 GJL111501R0002 10 0.175 48 0 0 B7-22-00-0 GJL111501R000 10 0.175 110... 127 0 0 B7-22-00-84 GJL111501R8004 10 0.175 220... 240 0 0 B7-22-00-80 GJL111501R8000 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 B6, B7 /12 Motor Protection and Control US Catalog

BC6, B7D 4-pole mini contactors with screw terminals 4 to 5.5 kw DC operated BC6-22-00 2CDC21102F0011 Description BC6, B7D 4-pole mini contactors are compact control products mainly used for switching resistive loads up to 690 V AC. These contactors are designed with: 4 main poles control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front or side mounting designed for rail or wall mounting Ordering details IEC UL/CSA Rated control Rated General use circuit voltage operational rating U C Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C AC-1 A V DC kg Weight (1 pce) 4 N.O. main poles 20 600 V / 16 A 24 0 0 B7D-40-00-01 GJL117201R0001 10 0.175 220 0 0 B7D-40-00-05 GJL117201R0005 10 0.175 2 N.O. + 2 N.C. main poles 20 00 V / 12 A 12 0 0 BC6-22-00-07 GJL121501R0007 10 0.175 24 0 0 BC6-22-00-01 GJL121501R0001 10 0.175 42 0 0 BC6-22-00-02 GJL121501R0002 10 0.175 48 0 0 BC6-22-00-16 GJL121501R1006 10 0.175 60 0 0 BC6-22-00-0 GJL121501R000 10 0.175 110... 125 0 0 BC6-22-00-04 GJL121501R0004 10 0.175 220... 240 0 0 BC6-22-00-05 GJL121501R0005 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 BC6, B7D US Catalog Motor Protection and Control /1

TBC7 4-pole mini contactors with screw terminals 4 to 5.5 kw DC operated large coil voltage range TBC7-1-00 2CDC211026F0011 Description TBC7 4-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: 4 main poles control circuit: DC operated low coil consumption (5 W at pull-in and at holding) hum-free coil expanded ambient temperature range -0 +70 C and wide range voltage supply no auxiliary contact block permitted for mounting designed for rail or wall mounting material is approved for railway applications Ordering details IEC UL/CSA Rated control Rated operational General use circuit voltage current rating U C min... U C max θ 40 C AC-1 Auxiliary contacts fitted Catalog number Global code Pkg qty A V DC kg Weight (1 pce) N.O. + 1 N.C. main poles 20 600 V / 16 A 50... 90 0 0 TBC7-1-00-55 GJL11461R5005 10 0.185 77... 14 0 0 TBC7-1-00-62 GJL11461R6002 10 0.185 140... 260 0 0 TBC7-1-00-68 GJL11461R6008 10 0.185 2 N.O. + 2 N.C. main poles 20 600 V / 16 A 50... 90 0 0 TBC7-22-00-55 GJL11561R5005 10 0.185 77... 14 0 0 TBC7-22-00-62 GJL11561R6002 10 0.185 140... 260 0 0 TBC7-22-00-68 GJL11561R6008 10 0.185 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 TBC7 /14 Motor Protection and Control US Catalog

K6 4-pole mini contactor relays with screw terminals AC operated K6-22Z 2CDC211012F0011 Description K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: 4-poles with various contact combinations control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front or side mounting designed for rail or wall mounting 2CDC211004F0010 Ordering details Rated control circuit voltage Catalog number Global code Pkg U C qty Weight (1 pce) 50 Hz 60 Hz K6-1Z V AC V AC kg K6 4-pole mini contactor relays 24 24 K6-22Z-01 GJH1211001R0221 10 0.175 42 42 K6-22Z-02 GJH1211001R0222 10 0.175 48 48 K6-22Z-0 GJH1211001R022 10 0.175 110...127 110...127 K6-22Z-84 GJH1211001R8224 10 0.175 220... 240 220... 240 K6-22Z-80 GJH1211001R8220 10 0.175 80... 415 80... 415 K6-22Z-85 GJH1211001R8225 10 0.175 24 24 K6-1Z-01 GJH1211001R011 10 0.175 42 42 K6-1Z-02 GJH1211001R012 10 0.175 48 48 K6-1Z-0 GJH1211001R01 10 0.175 110...127 110...127 K6-1Z-84 GJH1211001R814 10 0.175 220... 240 220... 240 K6-1Z-80 GJH1211001R810 10 0.175 80... 415 80... 415 K6-1Z-85 GJH1211001R815 10 0.175 24 24 K6-40E-01 GJH1211001R0401 10 0.175 42 42 K6-40E-02 GJH1211001R0402 10 0.175 48 48 K6-40E-0 GJH1211001R040 10 0.175 110...127 110...127 K6-40E-84 GJH1211001R8404 10 0.175 220... 240 220... 240 K6-40E-80 GJH1211001R8400 10 0.175 80... 415 80... 415 K6-40E-85 GJH1211001R8405 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 K6 US Catalog Motor Protection and Control /15

KC6 4-pole mini contactor relays with screw terminals DC operated KC6-22Z 2CDC211016F0011 Description KC6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: 4-poles with various contact combinations control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for front or side mounting designed for rail or wall mounting Ordering details Rated control circuit voltage Catalog number Global code Pkg U C qty V DC Weight (1 pce) kg KC6 4-pole mini contactor relays 12 KC6-22Z-07 GJH121001R0227 10 0.175 24 KC6-22Z-01 GJH121001R0221 10 0.175 48 KC6-22Z-16 GJH121001R1226 10 0.175 60 KC6-22Z-0 GJH121001R022 10 0.175 110... 125 KC6-22Z-04 GJH121001R0224 10 0.175 220... 240 KC6-22Z-05 GJH121001R0225 10 0.175 12 KC6-1Z-07 GJH121001R017 10 0.175 24 KC6-1Z-01 GJH121001R011 10 0.175 48 KC6-1Z-16 GJH121001R116 10 0.175 60 KC6-1Z-0 GJH121001R01 10 0.175 110... 125 KC6-1Z-04 GJH121001R014 10 0.175 220... 240 KC6-1Z-05 GJH121001R015 10 0.175 12 KC6-40E-07 GJH121001R0407 10 0.175 24 KC6-40E-01 GJH121001R0401 10 0.175 48 KC6-40E-16 GJH121001R1406 10 0.175 60 KC6-40E-0 GJH121001R040 10 0.175 110... 125 KC6-40E-04 GJH121001R0404 10 0.175 220... 240 KC6-40E-05 GJH121001R0405 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 KC6 /16 Motor Protection and Control US Catalog

KC6 4-pole interface mini contactor relays with screw terminals DC operated KC6-1Z 2CDC211017F0011 Description KC6 4-pole interface mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: 4-poles with various contact combinations control circuit: DC operated low coil consumption (1.4... 2.8 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting designed for rail or wall mounting Ordering details Rated control circuit voltage Catalog number Global code Pkg U C qty V DC Weight (1 pce) DC operation 24 V / 1.4 W 24 KC6-1Z-1.4 GJH121001R811 10 0.175 24 KC6-40E-1.4 GJH121001R8401 10 0.175 kg DC operation 17... 2 V / 2.4 W 17... 2 KC6-1Z-2.4 GJH121001R511 10 0.175 17... 2 KC6-40E-2.4 GJH121001R5401 10 0.175 DC operation 24 V / 1.7 W 24 K6S-22Z-1.7 GJH121001R7221 10 0.175 24 K6S-1Z-1.7 GJH121001R711 10 0.175 24 K6S-40E-1.7 GJH121001R7401 10 0.175 DC operation 17... 2 V / 2.8 W 17... 2 K6S-22Z-2.8 GJH121001R7222 10 0.175 17... 2 K6S-1Z-2.8 GJH121001R712 10 0.175 17... 2 K6S-40E-2.8 GJH121001R7402 10 0.175 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 KC6 US Catalog Motor Protection and Control /17

TKC6 4-pole mini contactor relays with screw terminals DC operated large coil voltage range TKC6-1Z 2CDC211021F0011 Description TKC6 4-pole mini contactors are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: 4-poles with various contact combinations control circuit: DC operated, hum free, low consumption (5 W at pull-in and at holding) expanded ambient temperature range -0 +70 C and wide range voltage supply material is suitable for railway applications humfree operating DC coil no auxiliary contact block permitted for mounting designed for rail or wall mounting Ordering details Rated control circuit voltage Catalog number Global code Pkg U C min... U C max qty V DC Weight (1 pce) kg 17... 2 TKC6-22Z-51 GJH121061R5221 10 0.180 50... 90 TKC6-22Z-55 GJH121061R5225 10 0.180 77... 14 TKC6-22Z-62 GJH121061R6222 10 0.180 140... 260 TKC6-22Z-68 GJH121061R6228 10 0.180 17... 2 TKC6-1Z-51 GJH121061R511 10 0.180 50... 90 TKC6-1Z-55 GJH121061R515 10 0.180 77... 14 TKC6-1Z-62 GJH121061R612 10 0.180 140... 260 TKC6-1Z-68 GJH121061R618 10 0.180 17... 2 TKC6-40E-51 GJH121061R5401 10 0.180 50... 90 TKC6-40E-55 GJH121061R5405 10 0.180 77... 14 TKC6-40E-62 GJH121061R6402 10 0.180 140... 260 TKC6-40E-68 GJH121061R6408 10 0.180 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212001F0011 TKC6 /18 Motor Protection and Control US Catalog

B6, B7 -pole mini contactors with soldering pins 4 to 5.5 kw AC operated B6-0-10-P 2CDC21100F0010 Description B6..P and B7..P -pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: main poles and one built-in auxiliary contact control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for side mounting designed for soldering on PCB boards B7-0-10-P 2CDC211011F0011 Ordering details IEC Rated operational power UL/CSA Rated control circuit voltage U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg Weight (1 pce) B6 mini contactors 4 12 00 V / 12 A 24 24 1 0 B6-0-10-P01 GJL1211009R0101 10 0.170 0 1 B6-0-01-P01 GJL1211009R0011 10 0.170 42 42 1 0 B6-0-10-P02 GJL1211009R0102 10 0.170 0 1 B6-0-01-P02 GJL1211009R0012 10 0.170 48 48 1 0 B6-0-10-P0 GJL1211009R010 10 0.170 0 1 B6-0-01-P0 GJL1211009R001 10 0.170 110 127 110 127 1 0 B6-0-10-P84 GJL1211009R8104 10 0.170 0 1 B6-0-01-P84 GJL1211009R8014 10 0.170 220 240 220 240 1 0 B6-0-10-P80 GJL1211009R8100 10 0.170 0 1 B6-0-01-P80 GJL1211009R8010 10 0.170 80 415 80 415 1 0 B6-0-10-P85 GJL1211009R8105 10 0.170 0 1 B6-0-01-P85 GJL1211009R8015 10 0.170 B7 mini contactors 5.5 12 5 600 V / 16 A 24 24 1 0 B7-0-10-P01 GJL111009R0101 10 0.170 0 1 B7-0-01-P01 GJL111009R0011 10 0.170 42 42 1 0 B7-0-10-P02 GJL111009R0102 10 0.170 0 1 B7-0-01-P02 GJL111009R0012 10 0.170 48 48 1 0 B7-0-10-P0 GJL111009R010 10 0.170 0 1 B7-0-01-P0 GJL111009R001 10 0.170 110 127 110 127 1 0 B7-0-10-P84 GJL111009R8104 10 0.170 0 1 B7-0-01-P84 GJL111009R8014 10 0.170 220 240 220 240 1 0 B7-0-10-P80 GJL111009R8100 10 0.170 0 1 B7-0-01-P80 GJL111009R8010 10 0.170 80 415 80 415 1 0 B7-0-10-P85 GJL111009R8105 10 0.170 0 1 B7-0-01-P85 GJL111009R8015 10 0.170 Note: Other types on request Main dimensions mm, inches 47.5 1.87" 47.7 1.88" 4. 0.17" 44.7 1.76" 45.2 1.78" 42.2 1.66" 1 0.04" 2CDC21200F0011 B6, B7 US Catalog Motor Protection and Control /19

BC6, BC7 -pole mini contactors with soldering pins 4 to 5.5 kw DC operated BC7-0-10-P 2CDC21100F0011 Description BC6, BC7 -pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: main poles and one built-in auxiliary contact control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for side mounting designed for soldering on PCB boards Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) BC6 mini contactors with N.O. main poles 4 12 00 V / 12 1 0 BC6-0-10-P07 GJL121009R0107 10 0.170 12 A 0 1 BC6-0-01-P07 GJL121009R0017 10 0.170 24 1 0 BC6-0-10-P01 GJL121009R0101 10 0.170 0 1 BC6-0-01-P01 GJL121009R0011 10 0.170 48 1 0 BC6-0-10-P16 GJL121009R1106 10 0.170 0 1 BC6-0-01-P16 GJL121009R1016 10 0.170 60 1 0 BC6-0-10-P0 GJL121009R010 10 0.170 0 1 BC6-0-01-P0 GJL121009R001 10 0.170 110 125 1 0 BC6-0-10-P04 GJL121009R0104 10 0.170 0 1 BC6-0-01-P04 GJL121009R0014 10 0.170 220 240 1 0 BC6-0-10-P05 GJL121009R0105 10 0.170 0 1 BC6-0-01-P05 GJL121009R0015 10 0.170 BC7 mini contactors with N.O. main poles 5.5 12 5 600 V / 12 1 0 BC7-0-10-P07 GJL11009R0107 10 0.170 16 A 0 1 BC7-0-01-P07 GJL11009R0017 10 0.170 24 1 0 BC7-0-10-P01 GJL11009R0101 10 0.170 0 1 BC7-0-01-P01 GJL11009R0011 10 0.170 48 1 0 BC7-0-10-P16 GJL11009R1106 10 0.170 0 1 BC7-0-01-P16 GJL11009R1016 10 0.170 60 1 0 BC7-0-10-P0 GJL11009R010 10 0.170 0 1 BC7-0-01-P0 GJL11009R001 10 0.170 110 125 1 0 BC7-0-10-P04 GJL11009R0104 10 0.170 0 1 BC7-0-01-P04 GJL11009R0014 10 0.170 220 240 1 0 BC7-0-10-P05 GJL11009R0105 10 0.170 0 1 BC7-0-01-P05 GJL11009R0015 10 0.170 BC6 mini contactors 2 N.O. + 1 N.C. main poles 4 12 00 V / 24 1 0 BC6-21-10-P01 GJL121109R0101 10 0.170 12 A 48 1 0 BC6-21-10-P16 GJL121109R1106 10 0.170 60 1 0 BC6-21-10-P0 GJL121109R010 10 0.170 110 125 1 0 BC6-21-10-P04 GJL121109R0104 10 0.170 220 240 1 0 BC6-21-10-P05 GJL121109R0105 10 0.170 Note: Other types on request Main dimensions mm, inches 47.7 1.88" 4. 0.17" 47.5 1.87" 44.7 1.76" 45.2 1.78" 42.2 1.66" 1 0.04" 2CDC21200F0011 B6, B7 /20 Motor Protection and Control US Catalog

VB6, VB7 -pole mini reversing contactors with soldering pins 4 to 5.5 kw AC operated Description VB6, VB7 -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. VB7-0-10-P These reversing contactors are designed with: built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be de-energised for 50 ms at least to prevent phase to phase short circuit on the arc control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting designed for soldering on PCB boards Ordering details IEC Rated operational power UL/CSA Rated control circuit voltage U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg VB6 mini reversing contactors 4 12 00 V / 12 A VB7 mini reversing contactors 5.5 12 5 600 V / 16 A Note: Other types on request Weight (1 pce) 24 24 1 0 VB6-0-10-P01 GJL1211909R0101 5 0.45 0 1 VB6-0-01-P01 GJL1211909R0011 5 0.45 42 42 1 0 VB6-0-10-P02 GJL1211909R0102 5 0.45 0 1 VB6-0-01-P02 GJL1211909R0012 5 0.45 48 48 1 0 VB6-0-10-P0 GJL1211909R010 5 0.45 0 1 VB6-0-01-P0 GJL1211909R001 5 0.45 110 127 110 127 1 0 VB6-0-10-P84 GJL1211909R8104 5 0.45 0 1 VB6-0-01-P84 GJL1211909R8014 5 0.45 220 240 220 240 1 0 VB6-0-10-P80 GJL1211909R8100 5 0.45 0 1 VB6-0-01-P80 GJL1211909R8010 5 0.45 80 415 80 415 1 0 VB6-0-10-P85 GJL1211909R8105 5 0.45 0 1 VB6-0-01-P85 GJL1211909R8015 5 0.45 24 24 1 0 VB7-0-10-P01 GJL111909R0101 5 0.45 0 1 VB7-0-01-P01 GJL111909R0011 5 0.45 42 42 1 0 VB7-0-10-P02 GJL111909R0102 5 0.45 0 1 VB7-0-01-P02 GJL111909R0012 5 0.45 48 48 1 0 VB7-0-10-P0 GJL111909R010 5 0.45 0 1 VB7-0-01-P0 GJL111909R001 5 0.45 110 127 110 127 1 0 VB7-0-10-P84 GJL111909R8104 5 0.45 0 1 VB7-0-01-P84 GJL111909R8014 5 0.45 220 240 220 240 1 0 VB7-0-10-P80 GJL111909R8100 5 0.45 0 1 VB7-0-01-P80 GJL111909R8010 5 0.45 80 415 80 415 1 0 VB7-0-10-P85 GJL111909R8105 5 0.45 0 1 VB7-0-01-P85 GJL111909R8015 5 0.45 Main dimensions mm, inches 47.7 1.88" 4. 0.17" 96.2.79" 44.7 1.76" 57.5 2.26" 45.2 1.78" 42.2 1.66" 1 0.04" 2CDC211010S0011 4.5 0.18" 2CDC212007F0011 VB6, VB7 US Catalog Motor Protection and Control /21

VBC6, VBC7 -pole mini reversing contactors with soldering pins 4 to 5.5 kw DC operated VBC7-0-10-P 2CDC211009F0011 Description VBC6, VBC7 -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be de-energised for 50 ms at least to prevent phase to phase short circuit on the arc control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting designed for soldering on PCB boards Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) VBC6 mini reversing contactors 4 12 00 V / 12 A 12 1 0 VBC6-0-10-P07 GJL121909R0107 5 0.45 0 1 VBC6-0-01-P07 GJL121909R0017 5 0.45 24 1 0 VBC6-0-10-P01 GJL121909R0101 5 0.45 0 1 VBC6-0-01-P01 GJL121909R0011 5 0.45 48 1 0 VBC6-0-10-P06 GJL121909R0106 5 0.45 0 1 VBC6-0-06-P06 GJL121909R0016 5 0.45 60 1 0 VBC6-0-10-P0 GJL121909R010 5 0.45 0 1 VBC6-0-01-P0 GJL121909R001 5 0.45 110... 125 1 0 VBC6-0-10-P04 GJL121909R0104 5 0.45 0 1 VBC6-0-01-P04 GJL121909R0014 5 0.45 220 240 1 0 VBC6-0-10-P05 GJL121909R0105 5 0.45 0 1 VBC6-0-01-P05 GJL121909R0015 5 0.45 VBC7 mini reversing contactors 5.5 12 5 600 V / 16 A 12 1 0 VBC7-0-10-P07 GJL11909R0107 5 0.45 0 1 VBC7-0-01-P07 GJL11909R0017 5 0.45 24 1 0 VBC7-0-10-P01 GJL11909R0101 5 0.45 0 1 VBC7-0-01-P01 GJL11909R0011 5 0.45 48 1 0 VBC7-0-10-P16 GJL11909R1106 5 0.45 0 1 VBC7-0-01-P16 GJL11909R1016 5 0.45 60 1 0 VBC7-0-10-P0 GJL11909R010 5 0.45 0 1 VBC7-0-01-P0 GJL11909R001 5 0.45 110... 125 1 0 VBC7-0-10-P04 GJL11909R0104 5 0.45 0 1 VBC7-0-01-P04 GJL11909R0014 5 0.45 220 240 1 0 VBC7-0-10-P05 GJL11909R0105 5 0.45 0 1 VBC7-0-01-P05 GJL11909R0015 5 0.45 Note: Other types on request Main dimensions mm, inches 47.7 1.88" 4. 0.17" 96.2.79" 44.7 1.76" 57.5 2.26" 45.2 1.78" 42.2 1.66" 1 0.04" 4.5 0.18" 2CDC212007F0011 VBC6, VBC7 /22 Motor Protection and Control US Catalog

VB6A, VB7A -pole mini reversing contactors with soldering pins 4 to 5.5 kw AC operated with safety blocking function VB7-0-01-P 2CDC21101F0010 Description VB6A, VB7A -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting designed for soldering on PCB boards Ordering details IEC UL/CSA Rated control circuit Rated operational voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg Weight (1 pce) VB6A mini reversing contactors with safety blocking function 4 12 00 V / 24 24 1 0 VB6A-0-10-P01 GJL1211919R0101 5 0.45 12 A 0 1 VB6A-0-01-P01 GJL1211919R0011 5 0.45 42 42 1 0 VB6A-0-10-P02 GJL1211919R0102 5 0.45 0 1 VB6A-0-01-P02 GJL1211919R0012 5 0.45 48 48 1 0 VB6A-0-10-P0 GJL1211919R010 5 0.45 0 1 VB6A-0-01-P0 GJL1211919R001 5 0.45 110 127 110 127 1 0 VB6A-0-10-P84 GJL1211919R8104 5 0.45 0 1 VB6A-0-01-P84 GJL1211919R8014 5 0.45 220 240 220 240 1 0 VB6A-0-10-P80 GJL1211919R8100 5 0.45 0 1 VB6A-0-01-P80 GJL1211919R8010 5 0.45 80 415 80 415 1 0 VB6A-0-10-P85 GJL1211919R8105 5 0.45 0 1 VB6A-0-01-P85 GJL1211919R8015 5 0.45 VB7A mini reversing contactors with safety blocking function 5.5 12 5 600 V / 24 24 1 0 VB7A-0-10-P01 GJL111919R0101 5 0.45 16 A 0 1 VB7A-0-01-P01 GJL111919R0011 5 0.45 42 42 1 0 VB7A-0-10-P02 GJL111919R0102 5 0.45 0 1 VB7A-0-01-P02 GJL111919R0012 5 0.45 48 48 1 0 VB7A-0-10-P0 GJL111919R010 5 0.45 0 1 VB7A-0-01-P0 GJL111919R001 5 0.45 110 127 110 127 1 0 VB7A-0-10-P84 GJL111919R8104 5 0.45 0 1 VB7A-0-01-P84 GJL111919R8014 5 0.45 220 240 220 240 1 0 VB7A-0-10-P80 GJL111919R8100 5 0.45 0 1 VB7A-0-01-P80 GJL111919R8010 5 0.45 80 415 80 415 1 0 VB7A-0-10-P85 GJL111919R8105 5 0.45 0 1 VB7A-0-01-P85 GJL111919R8015 5 0.45 Note: Other types on request Main dimensions mm, inches 47.7 1.88" 4. 0.17" 96.2.79" 44.7 1.76" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 1 0.04" 2CDC212007F0011 VB6A, VB7A US Catalog Motor Protection and Control /2

VBC7A -pole mini reversing contactors with soldering pins 4 to 5.5 kw DC operated with safety blocking function VBC7A-0-10-P 2CDC211009F0011 Description VBC7A -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. control circuit: AC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting designed for soldering on PCB boards Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) VBC7A mini reversing contactors with safety blocking function 5.5 12 5 600 V / 12 1 0 VBC7A-0-10-P07 GJL11919R0107 5 0.45 16 A 0 1 VBC7A-0-01-P07 GJL11919R0017 5 0.45 24 1 0 VBC7A-0-10-P01 GJL11919R0101 5 0.45 0 1 VBC7A-0-01-P01 GJL11919R0011 5 0.45 48 1 0 VBC7A-0-10-P16 GJL11919R1106 5 0.45 0 1 VBC7A-0-01-P16 GJL11919R1016 5 0.45 60 1 0 VBC7A-0-10-P0 GJL11919R010 5 0.45 0 1 VBC7A-0-01-P0 GJL11919R001 5 0.45 110... 125 1 0 VBC7A-0-10-P04 GJL11919R0104 5 0.45 0 1 VBC7A-0-01-P04 GJL11919R0014 5 0.45 220 240 1 0 VBC7A-0-10-P05 GJL11919R0105 5 0.45 0 1 VBC7A-0-01-P05 GJL11919R0015 5 0.45 Note: Other types on request Main dimensions mm, inches 47.7 1.88" 4. 0.17" 96.2.79" 44.7 1.76" 57.5 2.26" 45.2 1.78" 42.2 1.66" 1 0.04" 4.5 0.18" 2CDC212007F0011 VBC7A /24 Motor Protection and Control US Catalog

K6 4-pole mini contactor relays with soldering pins AC operated K6-22Z-P 2CDC211022F0011 Description K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: 4-poles with various contact combinations control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact block for side mounting designed for soldering on PCB boards Ordering details Rated control circuit voltage Catalog number Global code Pkg U C qty 50 Hz V AC 60 Hz V AC Weight (1 pce) kg K6 4-pole mini contactor relays 24 24 K6-22Z-P01 GJH1211009R0221 10 0.170 42 42 K6-22Z-P02 GJH1211009R0222 10 0.170 48 48 K6-22Z-P0 GJH1211009R022 10 0.170 110...127 110...127 K6-22Z-P84 GJH1211009R8224 10 0.170 220... 240 220... 240 K6-22Z-P80 GJH1211009R8220 10 0.170 80... 415 80... 415 K6-22Z-P85 GJH1211009R8225 10 0.170 24 24 K6-1Z-P01 GJH1211009R011 10 0.170 42 42 K6-1Z-P02 GJH1211009R012 10 0.170 48 48 K6-1Z-P0 GJH1211009R01 10 0.170 110...127 110...127 K6-1Z-P84 GJH1211009R814 10 0.170 220... 240 220... 240 K6-1Z-P80 GJH1211009R810 10 0.170 80... 415 80... 415 K6-1Z-P85 GJH1211009R815 10 0.170 24 24 K6-40E-P01 GJH1211009R0401 10 0.170 42 42 K6-40E-P02 GJH1211009R0402 10 0.170 48 48 K6-40E-P0 GJH1211009R040 10 0.170 110...127 110...127 K6-40E-P84 GJH1211009R8404 10 0.170 220... 240 220... 240 K6-40E-P80 GJH1211009R8400 10 0.170 80... 415 80... 415 K6-40E-P85 GJH1211009R8405 10 0.170 Note: Other types on request Main dimensions mm, inches 47.5 1.87" 47.7 1.88" 4. 0.17" 44.7 1.76" 45.2 1.78" 42.2 1.66" 1 0.04" 2CDC21200F0011 K6 US Catalog Motor Protection and Control /25

KC6 4-pole mini contactor relays with soldering pins DC operated KC6-22Z-P 2CDC211025F0011 Description KC6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: 4-poles with various contact combinations control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact block for side mounting designed for soldering on PCB boards Ordering details Rated control circuit voltage U C Catalog number Global code Pkg qty V DC Weight (1 pce) kg K6 4-pole mini contactor relays 12 KC6-22Z-P07 GJH121009R0227 10 0.170 24 KC6-22Z-P01 GJH121009R0221 10 0.170 48 KC6-22Z-P16 GJH121009R1226 10 0.170 110... 125 KC6-22Z-P04 GJH121009R0224 10 0.170 220... 240 KC6-22Z-P05 GJH121009R0225 10 0.170 24 KC6-1Z-P01 GJH121009R011 10 0.170 48 KC6-1Z-P16 GJH121009R116 10 0.170 110... 125 KC6-1Z-P04 GJH121009R014 10 0.170 220... 240 KC6-1Z-P05 GJH121009R015 10 0.170 12 KC6-40E-P07 GJH121009R0407 10 0.170 24 KC6-40E-P01 GJH121009R0401 10 0.170 48 KC6-40E-P16 GJH121009R1406 10 0.170 110... 125 KC6-40E-P04 GJH121009R0404 10 0.170 220... 240 KC6-40E-P05 GJH121009R0405 10 0.170 Note: Other types on request Main dimensions mm, inches 47.5 1.87" 47.7 1.88" 4. 0.17" 44.7 1.76" 45.2 1.78" 42.2 1.66" 1 0.04" 2CDC21102F0011 2CDC21200F0011 KC6-1Z-P KC6 /26 Motor Protection and Control US Catalog

BC6, BC7 -pole interface mini contactors with soldering pins 4 to 5.5 kw DC operated BC7-0-10-P 2CDC21100F0011 Description BC6, BC7 -pole interface mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: main poles and one built-in auxiliary contact control circuit: DC operated low coil consumption (1.4... 2.4 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting designed for soldering on PCB boards Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) DC operation 24 V / 1.4 W 4 12 00 V / 12 A 5.5 12 5 600 V / 16 A 24 1 0 BC6-0-10-P1.4 GJL121009R8101 10 0.170 0 1 BC6-0-01-P1.4 GJL121009R8011 10 0.170 24 1 0 BC7-0-10-P1.4 GJL11009R8101 10 0.170 0 1 BC7-0-01-P1.4 GJL11009R8011 10 0.170 DC operation 17 2 V / 2.4 W, I th < 8 A 4 12 00 V / 12 A 5.5 12 5 600 V / 16 A 17... 2 1 0 BC6-0-10-P2.4 GJL121009R5101 10 0.170 0 1 BC6-0-01-P2.4 GJL121009R5011 10 0.170 17... 2 1 0 BC7-0-10-P2.4 GJL11009R5101 10 0.170 0 1 BC7-0-01-P2.4 GJL11009R5011 10 0.170 Note: Other types on request Main dimensions mm, inches 47.5 1.87" 47.7 1.88" 4. 0.17" 44.7 1.76" 45.2 1.78" 42.2 1.66" 1 0.04" 2CDC21200F0011 BC6, BC7 US Catalog Motor Protection and Control /27

KC6 4-pole interface mini contactor relays with solderings pins DC operated KC6-1Z-P-1.4 2CDC21102F0011 Description KC6 4-pole interface mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: 4-poles with various contact combinations control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact block for side mounting designed for soldering on PCB boards Ordering details Rated control circuit voltage Catalog number Global code Pkg U C qty V DC Weight (1 pce) kg DC operation 24 V / 1.4 W 24 KC6-1Z-P1.4 GJH121009R811 10 0.170 24 KC6-40E-P1.4 GJH121009R8401 10 0.170 DC operation 17... 2 V / 2.4 W 17... 2 KC6-1Z-P2.4 GJH121009R511 10 0.170 17... 2 KC6-40E-P2.4 GJH121009R5401 10 0.170 Note: Other types on request Main dimensions mm, inches 47.5 1.87" 47.7 1.88" 4. 0.17" 44.7 1.76" 45.2 1.78" 42.2 1.66" 1 0.04" 2CDC21200F0011 KC6 /28 Motor Protection and Control US Catalog

B6, B7 -pole mini contactors with flat pin connection 4 to 5.5 kw AC operated B6-0-10-F 2CDC211002F0010 Description B6..F, B7..F -pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: flat pin connection for plug-in wiring and shake proven connection main poles and one built-in auxiliary contact control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for side mounting designed for rail or wall mounting B7-0-10-F 2CDC21101F0011 Ordering details IEC Rated operational power UL/CSA Rated control circuit voltage U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg Weight (1 pce) B6 mini contactors 4 20 00 V / 12 A 24 24 1 0 B6-0-10-F01 GJL121100R0101 10 0.170 0 1 B6-0-01-F01 GJL121100R0011 10 0.170 42 42 1 0 B6-0-10-F02 GJL121100R0102 10 0.170 0 1 B6-0-01-F02 GJL121100R0012 10 0.170 48 48 1 0 B6-0-10-F0 GJL121100R010 10 0.170 0 1 B6-0-01-F0 GJL121100R001 10 0.170 110 127 110 127 1 0 B6-0-10-F84 GJL121100R8104 10 0.170 0 1 B6-0-01-F84 GJL121100R8014 10 0.170 220 240 220 240 1 0 B6-0-10-F80 GJL121100R8100 10 0.170 0 1 B6-0-01-F80 GJL121100R8010 10 0.170 80 415 80 415 1 0 B6-0-10-F85 GJL121100R8105 10 0.170 0 1 B6-0-01-F85 GJL121100R8015 10 0.170 B7 mini contactors 5.5 20 5 600 V / 16 A 24 24 1 0 B7-0-10-F01 GJL11100R0101 10 0.170 0 1 B7-0-01-F01 GJL11100R0011 10 0.170 42 42 1 0 B7-0-10-F02 GJL11100R0102 10 0.170 0 1 B7-0-01-F02 GJL11100R0012 10 0.170 48 48 1 0 B7-0-10-F0 GJL11100R010 10 0.170 0 1 B7-0-01-F0 GJL11100R001 10 0.170 110 127 110 127 1 0 B7-0-10-F84 GJL11100R8104 10 0.170 0 1 B7-0-01-F84 GJL11100R8014 10 0.170 220 240 220 240 1 0 B7-0-10-F80 GJL11100R8100 10 0.170 0 1 B7-0-01-F80 GJL11100R8010 10 0.170 80 415 80 415 1 0 B7-0-10-F85 GJL11100R8105 10 0.170 0 1 B7-0-01-F85 GJL11100R8015 10 0.170 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 46.7 1.84" 47.5 1.87" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" B6, B7 4.5 0.18" 2CDC212002F0011 US Catalog Motor Protection and Control /29

BC6, BC7 -pole mini contactors with flat pin connection 4 to 5.5 kw DC operated BC6-0-10-F BC7-0-10-F 2CDC211041F0011 2CDC211024F0011 Description BC6, BC7 -pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: flat pin connection for plug-in wiring and shake proven connection main poles and one built-in auxiliary contact control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for side mounting designed for rail or wall mounting Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary Catalog number Order code Pkg contacts qty fitted current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) BC6 mini contactors 4 20 00 V / 12 A 12 1 0 BC6-0-10-F07 GJL12100R0107 10 0.170 0 1 BC6-0-01-F07 GJL12100R0017 10 0.170 24 1 0 BC6-0-10-F01 GJL12100R0101 10 0.170 0 1 BC6-0-01-F01 GJL12100R0011 10 0.170 48 1 0 BC6-0-10-F16 GJL12100R1106 10 0.170 0 1 BC6-0-01-F16 GJL12100R1016 10 0.170 60 1 0 BC6-0-10-F0 GJL12100R010 10 0.170 0 1 BC6-0-01-F0 GJL12100R001 10 0.170 110 125 1 0 BC6-0-10-F04 GJL12100R0104 10 0.170 0 1 BC6-0-01-F04 GJL12100R0014 10 0.170 220 240 1 0 BC6-0-10-F05 GJL12100R0105 10 0.170 0 1 BC6-0-01-F05 GJL12100R0015 10 0.170 BC7 mini contactors 5.5 20 5 600 V / 16 A 12 1 0 BC7-0-10-F07 GJL1100R0107 10 0.170 0 1 BC7-0-01-F07 GJL1100R0017 10 0.170 24 1 0 BC7-0-10-F01 GJL1100R0101 10 0.170 0 1 BC7-0-01-F01 GJL1100R0011 10 0.170 48 1 0 BC7-0-10-F16 GJL1100R1106 10 0.170 0 1 BC7-0-01-F16 GJL1100R1016 10 0.170 60 1 0 BC7-0-10-F0 GJL1100R010 10 0.170 0 1 BC7-0-01-F0 GJL1100R001 10 0.170 110 125 1 0 BC7-0-10-F04 GJL1100R0104 10 0.170 0 1 BC7-0-01-F04 GJL1100R0014 10 0.170 220 240 1 0 BC7-0-10-F05 GJL1100R0105 10 0.170 0 1 BC7-0-01-F05 GJL1100R0015 10 0.170 Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212002F0011 /0 Motor Protection and Control US Catalog BC6, BC7

VB7 -pole mini reversing contactors with flat pin connection 4 to 5.5 kw AC operated VB7-0-10-F 2CDC211005F0011 Description VB7 -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be de-energised for 50 ms at least to prevent phase to phase short circuit on the arc. flat pin connection for plug-in wiring and shake proven connection control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting for rail and wall mounting Ordering details IEC UL/CSA Rated control circuit Rated operational voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC kg Weight (1 pce) VB7 mini reversing contactors 5.5 20 5 600 V / 16 A 24 24 1 0 VB7-0-10-F01 GJL11190R0101 5 0.45 0 1 VB7-0-01-F01 GJL11190R0011 5 0.45 42 42 1 0 VB7-0-10-F02 GJL11190R0102 5 0.45 0 1 VB7-0-01-F02 GJL11190R0012 5 0.45 48 48 1 0 VB7-0-10-F0 GJL11190R010 5 0.45 0 1 VB7-0-01-F0 GJL11190R001 5 0.45 110 127 110 127 1 0 VB7-0-10-F84 GJL11190R8104 5 0.45 0 1 VB7-0-01-F84 GJL11190R8014 5 0.45 220 240 220 240 1 0 VB7-0-10-F80 GJL11190R8100 5 0.45 0 1 VB7-0-01-F80 GJL11190R8010 5 0.45 80 415 80 415 1 0 VB7-0-10-F85 GJL11190R8105 5 0.45 0 1 VB7-0-01-F85 GJL11190R8015 5 0.45 Note: Other types on request Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212006F0011 VB7 US Catalog Motor Protection and Control /1

VBC7 -pole mini reversing contactors with flat pin connection 4 to 5.5 kw DC operated VBC7-0-10-F 2CDC211004F0011 Description VBC7 -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be de-energised for 50 ms at least to prevent phase to phase short circuit on the arc flat pin connection for plug-in wiring and shake proven connection control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting for rail and wall mounting Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) VBC7 mini reversing contactors 5.5 20 5 600 V / 16 A 12 1 0 VBC7-0-10-F07 GJL1190R0107 5 0.45 0 1 VBC7-0-01-F07 GJL1190R0017 5 0.45 24 1 0 VBC7-0-10-F01 GJL1190R0101 5 0.45 0 1 VBC7-0-01-F01 GJL1190R0011 5 0.45 48 1 0 VBC7-0-10-F16 GJL1190R1106 5 0.45 0 1 VBC7-0-01-F16 GJL1190R1016 5 0.45 60 1 0 VBC7-0-10-F0 GJL1190R010 5 0.45 0 1 VBC7-0-01-F0 GJL1190R001 5 0.45 110... 125 1 0 VBC7-0-10-F04 GJL1190R0104 5 0.45 0 1 VBC7-0-01-F04 GJL1190R0014 5 0.45 220 240 1 0 VBC7-0-10-F05 GJL1190R0105 5 0.45 0 1 VBC7-0-01-F05 GJL1190R0015 5 0.45 Note: Other types on request Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212006F0011 VBC7 /2 Motor Protection and Control US Catalog

VB7A -pole mini reversing contactors with flat pin connection 4 to 5.5 kw AC operated with safety blocking function VB7A-0-10-F 2CDC21100F0011 Description VB7A -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. flat pin connection for plug-in wiring and shake proven connection control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting for rail and wall mounting Ordering details IEC UL/CSA Rated control circuit Rated operational voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V 50 Hz 60 Hz AC- AC-1 kw A hp V AC V AC pce kg Weight (1 pce) VB7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 24 24 1 0 VB7A-0-10-F01 GJL11191R0101 5 0.45 16 A 0 1 VB7A-0-01-F01 GJL11191R0011 5 0.45 42 42 1 0 VB7A-0-10-F02 GJL11191R0102 5 0.45 0 1 VB7A-0-01-F02 GJL11191R0012 5 0.45 48 48 1 0 VB7A-0-10-F0 GJL11191R010 5 0.45 0 1 VB7A-0-01-F0 GJL11191R001 5 0.45 110 127 110 127 1 0 VB7A-0-10-F84 GJL11191R8104 5 0.45 0 1 VB7A-0-01-F84 GJL11191R8014 5 0.45 220 240 220 240 1 0 VB7A-0-10-F80 GJL11191R8100 5 0.45 0 1 VB7A-0-01-F80 GJL11191R8010 5 0.45 80 415 80 415 1 0 VB7A-0-10-F85 GJL11191R8105 5 0.45 0 1 VB7A-0-01-F85 GJL11191R8015 5 0.45 Note: Other types on request Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212006F0011 VB7A US Catalog Motor Protection and Control /

VBC7A -pole mini reversing contactors with flat pin connection 4 to 5.5 kw DC operated with safety blocking function VBC7A-0-10-F 2CDC211002F0011 Description VBC7A -pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. flat pin connection for plug-in wiring and shake proven connection control circuit: DC operated low coil consumption (.5 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting for rail and wall mounting Ordering details IEC UL/CSA Rated control Rated operational circuit voltage power U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) VBC7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 12 1 0 VBC7A-0-10-F07 GJL1191R0107 5 0.45 16 A 0 1 VBC7A-0-01-F07 GJL1191R0017 5 0.45 24 1 0 VBC7A-0-10-F01 GJL1191R0101 5 0.45 0 1 VBC7A-0-01-F01 GJL1191R0011 5 0.45 48 1 0 VBC7A-0-10-F16 GJL1191R1106 5 0.45 0 1 VBC7A-0-01-F16 GJL1191R1016 5 0.45 60 1 0 VBC7A-0-10-F0 GJL1191R010 5 0.45 0 1 VBC7A-0-01-F0 GJL1191R001 5 0.45 110... 125 1 0 VBC7A-0-10-F04 GJL1191R0104 5 0.45 0 1 VBC7A-0-01-F04 GJL1191R0014 5 0.45 220 240 1 0 VBC7A-0-10-F05 GJL1191R0105 5 0.45 0 1 VBC7A-0-01-F05 GJL1191R0015 5 0.45 Note: Other types on request Main dimensions mm, inches 96.2.79" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212006F0011 VBC7A /4 Motor Protection and Control US Catalog

BC6, BC7 -pole interface mini contactors with flat pin connection 4 to 5.5 kw DC operated BC6-0-10-F 2CDC211041F0011 Description BC6, BC7 -pole interface mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: flat pin connection for plug-in wiring and shake proven connection main poles and one built-in auxiliary contact control circuit: DC operated low coil consumption (1.4... 2.4 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting designed for rail or wall mounting BC7-0-10-F 2CDC211024F0011 Ordering details IEC Rated operational power UL/CSA Rated control circuit voltage U C -phase motor rating 480 V General use rating Auxiliary contacts fitted Catalog number Global code Pkg qty current θ 40 C 400 V AC- AC-1 kw A hp V DC kg Weight (1 pce) DC operation 24 V / 1.4 W 4 20 00 V / 12 A 5.5 20 5 600 V / 16 A 24 1 0 BC6-0-10-F1.4 GJL12100R8101 10 0.170 0 1 BC6-0-01-F1.4 GJL12100R8011 10 0.170 24 1 0 BC7-0-10-F1.4 GJL1100R8101 10 0.170 0 1 BC7-0-01-F1.4 GJL1100R8011 10 0.170 DC operation 17 2 V / 2.4 W 4 20 00 V / 12 A 5.5 20 5 600 V / 16 A 17... 2 1 0 BC6-0-10-F2.4 GJL12100R5101 10 0.170 0 1 BC6-0-01-F2.4 GJL12100R5011 10 0.170 17... 2 1 0 BC7-0-10-F2.4 GJL1100R5101 10 0.170 0 1 BC7-0-01-F2.4 GJL1100R5011 10 0.170 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212002F0011 BC6, BC7 US Catalog Motor Protection and Control /5

K6 4-pole mini contactor relays with flat pin connection AC operated K6-22Z-F Description K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: flat pin connection for plug-in wiring and shake proven connection 4-poles with various contact combinations control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for side mounting for rail and wall mounting add-on auxiliary contact blocks for side mounting Ordering details Rated control circuit voltage Catalog number Global code Pkg qty Weight U C (1 pce) 50 Hz 60 Hz V AC V AC kg K6 4-pole mini contactor relays 24 24 K6-22Z-F01 GJH121100R0221 10 0.170 42 42 K6-22Z-F02 GJH121100R0222 10 0.170 48 48 K6-22Z-F0 GJH121100R022 10 0.170 110...127 110...127 K6-22Z-F84 GJH121100R8224 10 0.170 220... 240 220... 240 K6-22Z-F80 GJH121100R8220 10 0.170 80... 415 80... 415 K6-22Z-F85 GJH121100R8225 10 0.170 24 24 K6-1Z-F01 GJH121100R011 10 0.170 42 42 K6-1Z-F02 GJH121100R012 10 0.170 48 48 K6-1Z-F0 GJH121100R01 10 0.170 110...127 110...127 K6-1Z-F84 GJH121100R814 10 0.170 220... 240 220... 240 K6-1Z-F80 GJH121100R810 10 0.170 80... 415 80... 415 K6-1Z-F85 GJH121100R815 10 0.170 24 24 K6-40E-F01 GJH121100R0401 10 0.170 42 42 K6-40E-F02 GJH121100R0402 10 0.170 48 48 K6-40E-F0 GJH121100R040 10 0.170 110...127 110...127 K6-40E-F84 GJH121100R8404 10 0.170 220... 240 220... 240 K6-40E-F80 GJH121100R8400 10 0.170 80... 415 80... 415 K6-40E-F85 GJH121100R8405 10 0.170 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 2CDC21104S0011 4.5 0.18" 2CDC212002F0011 K6 /6 Motor Protection and Control US Catalog

KC6 4-pole mini contactor relays with flat pin connection DC operated KC6-22Z-F-01 2CDC211029F0011 Description K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: flat pin connection for plug-in wiring and shake proven connection 4-poles with various contact combinations control circuit: AC operated low coil consumption (.5 VA at pull-in and at holding) hum-free coil add-on auxiliary contact blocks for side mounting for rail and wall mounting Ordering details Rated control circuit voltage Catalog number Global code Pkg qty Weight (1 U C pce) V DC kg K6 4-pole mini contactor relays 12 KC6-22Z-F07 GJH12100R0227 10 0.170 24 KC6-22Z-F01 GJH12100R0221 10 0.170 48 KC6-22Z-F16 GJH12100R1226 10 0.170 110... 125 KC6-22Z-F04 GJH12100R0224 10 0.170 220... 240 KC6-22Z-F05 GJH12100R0225 10 0.170 12 KC6-1Z-F07 GJH12100R017 10 0.170 24 KC6-1Z-F01 GJH12100R011 10 0.170 48 KC6-1Z-F16 GJH12100R116 10 0.170 110... 125 KC6-1Z-F04 GJH12100R014 10 0.170 220... 240 KC6-1Z-F05 GJH12100R015 10 0.170 24 KC6-40E-F01 GJH12100R0401 10 0.170 48 KC6-40E-F16 GJH12100R1406 10 0.170 110... 125 KC6-40E-F04 GJH12100R0404 10 0.170 220... 240 KC6-40E-F05 GJH12100R0405 10 0.170 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 4.5 0.18" 2CDC212002F0011 KC6 US Catalog Motor Protection and Control /7

KC6 4-pole interface mini contactor relays with flat pin connection DC operated KC6-1Z-F-05 Description KC6 4-pole interface mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: flat pin connection for plug-in wiring and shake proven connection 4-poles with various contact combinations control circuit: AC operated low coil consumption (1.4... 2.4 W at pull-in and at holding) hum-free coil no auxiliary contact block permitted for mounting for rail and wall mounting no add-on auxiliary contact blocks possible Ordering details Rated control circuit voltage Catalog number Global code Pkg qty Weight U C (1 pce) V DC kg DC operation 24 V / 1.4 W 24 KC6-1Z-F1.4 GJH12100R811 10 0.170 24 KC6-40E-F1.4 GJH12100R8401 10 0.170 DC operation 17... 2 V / 2.4 W 17... 2 KC6-1Z-F51 GJH12100R511 10 0.170 17... 2 KC6-40E-F51 GJH12100R5401 10 0.170 Note: Other types on request Main dimensions mm, inches 52.5 2.07" 47.5 1.87" 46.7 1.84" 4.7 1.72" 57.5 2.26" 45.2 1.78" 42.2 1.66" 2CDC2110F0011 4.5 0.18" 2CDC212002F0011 KC6 /8 Motor Protection and Control US Catalog

B6, B7, BC6, BC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 -pole mini reversing contactors Accessories 2CDC211012F0010 Ordering details Suitable for Auxiliary contacts Catalog number Global code Pkg qty Weight (1 pce) CAF6-11N kg RV-BC6/250 2CDC211007F0010 Front mounted instantaneous auxiliary contact blocks (not allowed for mounting on TBC, B6S, B7S, interface contactors) 1) B6-, B7-40-00, BC6-, BC7-40-00 1 1 CAF6-11E GJL12010R0002 10 0.020 VB6, VB7, VBC6, VBC7, VB6A, VB7A 2 0 CAF6-20E GJL12010R0006 10 0.020 VBC6A, VBC7A 0 2 CAF6-02E GJL12010R0010 10 0.020 B6-, B7-0-10, BC6-, BC7-0-10 VB6, VB7, VBC6, VBC7, VB6A, VB7A VBC6A, VBC7A B6-, B7-0-01, BC6-, BC7-0-01 VB6, VB7, VBC6, VBC7, VB6A, VB7A VBC6A, VBC7A 1 1 CAF6-11M GJL12010R000 10 0.020 2 0 CAF6-20M GJL12010R0007 10 0.020 0 2 CAF6-02M GJL12010R0011 10 0.020 1 1 CAF6-11N GJL12010R0004 10 0.020 2 0 CAF6-20N GJL12010R0008 10 0.020 0 2 CAF6-02N GJL12010R0012 10 0.020 CA6-11E 2CDC211008F0010 Side mounted instantaneous auxiliary contact block 1) B6-, B7-40-00, BC6-, BC7-40-00 1 1 CA6-11E GJL120117R0002 10 0.00 B6-, B7-0-10, BC6-, BC7-0-10 1 1 CA6-11M GJL120117R000 10 0.00 B6-, B7-0-01, BC6-, BC7-0-01 1 1 CA6-11N GJL120117R0004 10 0.00 Side mounted instantaneous auxiliary contact block with soldering pins 2) B6-, B7-40-00-P, BC6-,BC7-40-00-P 1 1 CA6-11E-P GJL120119R0002 10 0.025 B6-, B7-0-10-P, BC6-, BC7-0-10-P 1 1 CA6-11M-P GJL120119R000 10 0.025 B6-, B7-0-01-P, BC6-, BC7-0-01-P 1 1 CA6-11N-P GJL120119R0004 10 0.025 2CDC211018F0011 Side mounted instantaneous auxiliary contact block with flat pin connection 2) B6-, B7-40-00-F, BC6-,BC7-40-00-F 1 1 CA6-11E-F GJL120118R0002 10 0.025 B6-, B7-0-10-F, BC6-, BC7-0-10-F 1 1 CA6-11M-F GJL120118R000 10 0.025 B6-, B7-0-01-F, BC6-, BC7-0-01-F 1 1 CA6-11N-F GJL120118R0004 10 0.025 Soldering receptacle (I th = 10 A, AC-: 500 V / 8 A, 690 V /.5 A, UL: 00 V / 8 A) B6, B7, BC6, BC7 LB6 GJL1201902R0001 10 0.020 2-pole aux.contact blocks CA LB6-CA GJL120190R0001 10 0.010 CA6-11E-P 1) CA6 and CAF6 must not be fitted simultaneously. Suitable for Rated control circuit Connection type Catalog number Global code Pkg voltage U C qty V DC Weight (1 pce) kg CA6-11E-F BSM6-0 2CDC211020F0011 SST27792R Surge suppressors for contactor coils BC6, BC7 24... 60 Cable lug RV-BC6/60 GHV2501902R0002 10 0.005 Flat pin, 2.8 mm RV-BC6-F/60 GHV2501902R000 10 0.005 50... 250 Cable lug RV-BC6/250 GHV250190R0002 10 0.005 Flat pin, 2.8 mm RV-BC6-F/250 GHV250190R000 10 0.010 80 Cable lug RV-BC6/80 GHV2501904R0002 10 0.005 Flat pin, 2.8 mm RV-BC6-F/80 GHV2501904R000 10 0.010 Note: Mini contactors for AC operation have an integrated protective circuit Connecting links with manual motor starters To connect B..VB.. mini contactor to MS116, MS12 BEA7/12 1SBN080906R1002 10 0.01 To connect B..VB.. mini contactors to MS25 BEA7/25 1SBN080906R1001 10 0.021 Connection sets for reversing contactors VB6, VB7, VBC6, VBC7, VB6A, VB7A, VBC6A, VBC7A, cross-section 1.8 mm² BSM6-0 GJL1201908R0001 10 0.010 Parallel connecting link B6, B7, BC6, BC7 LP6 GJL1201907R0001 100 0.009 2CDC21012F0011 Cover cap, transparent fitting to DIN rail design, sealable B6, B7, BC6, BC7 LT6-B GJL1201906R0001 10 0.015 Plastic label for markings B6, B7, BC6, BC7 BA5-50 1SBN110000R1000 50 0.020 T16-16 Thermal overload relays T16 (see "Thermal overload relays" chapter) 1 0.100 US Catalog Motor Protection and Control /9

K6, KC6 4-pole mini contactor relays Accessories Ordering details 2CDC211019F0011 Suitable for Auxiliary contacts Catalog number Global code Pkg qty Weight (1 pce) CAF6-11K Front mounted instantaneous auxiliary contact blocks 1) K6, KC6 1 1 CAF6-11K GJL12010R0001 10 0.020 2 0 CAF6-20K GJL12010R0005 10 0.020 0 2 CAF6-02K GJL12010R0009 10 0.020 kg 2CDC211009F0010 Side mounted instantaneous auxiliary contact block 1) K6, KC6 1 1 CA6-11K GJL120117R0001 10 0.00 Side mounted instantaneous auxiliary contact block with soldering pins 2) K6..P, KC6..P 1 1 CA6-11K-P GJL120119R0001 10 0.025 CA6-11K Side mounted instantaneous auxiliary contact block with flat pin connection 2) K6..F, KC6..F 1 1 CA6-11K-F GJL120118R0001 10 0.025 Soldering receptacle ( I e < 8 A ) K6, KC6 LB6 GJL1201902R0001 10 0.020 2-pole auxiliary contact blocks CA LB6-CA GJL120190R0001 10 0.010 1) CA6 and CAF6 must not be fitted simultaneously. 2CDC211011F0010 Suitable for Rated control circuit voltage U C V DC Connection type Catalog number Global code Pkg qty Weight (1 pce) kg CA6-11K-P 2CDC211010F0010 Surge suppressors for contactor coils KC6 24... 60 Cable lug RV-BC6/60 GHV2501902R0002 10 0.005 Flat pin, 2.8 mm RV-BC6-F/60 GHV2501902R000 10 0.005 50... 250 Cable lug RV-BC6/250 GHV250190R0002 10 0.005 Flat pin, 2.8 mm RV-BC6-F/250 GHV250190R000 10 0.010 80 Cable lug RV-BC6/80 GHV2501904R0002 10 0.005 Flat pin, 2.8 mm RV-BC6-F/80 GHV2501904R000 10 0.010 Note: Mini contactors for AC operation have an integrated protective circuit Cover cap, transparent fitting to DIN rail design, sealable K6, KC6 LT6-B GJL1201906R0001 10 0.015 CA6-11K-F 2CDC211006F0010 LT6-B 2CDC211007F0010 RV-BC6/250 /40 Motor Protection and Control US Catalog