RLT6X RLT6B ORIGINAL INSTRUCTIONS Cordless Line Trimmer
Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine. Subject to technical modification.
GENERAL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in Save all warnings and instruction for future reference. The term power tool in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) WORK AREA SAFETY Keep work area clean and well lit. Cluttered or dark Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks Keep children and bystanders away while operating a power tool. Distractions can cause you to lose ELECTRICAL SAFETY Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal Do not overreach. Keep proper footing and balance at all times. This enables better control of the power in Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a
BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with Use power tools only with specifically designated battery packs. Use of any other battery packs may When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This LAWN TRIMMER SAFETY WARNINGS Never allow children or people unfamiliar with the Keep bystanders, children and pets 5m away from the Never operate the product with damaged guards or Keep hands and feet away from the cutting means at Beware, the cutting elements continue to rotate after debris like small stones, gravel and other foreign Wires or string may become entangled with the cutting Switch off and remove battery pack before: servicing leaving the product unattended cleaning your product changing accessories checking for any damage if the product starts to vibrate abnormally performing maintenance Wear full eye and hearing protection while operating the Hearing protection may restrict the operators ability to hear warning sounds, pay particular attention to Secure long hair so it is above shoulder level to prevent The small blade fitted to the lawn guard is designed to trim the new extended line to the correct length for safe Always ensure that ventilation openings are kept clear Before use and after any impact, check that there are damaged should be properly repaired or replaced by an Make sure the cutting head attachment is properly Make sure all guards, deflectors and handles are Do not modify the machine in any way, this may WARNING Some regions have regulations that restrict the use of authority for advice TRANSPORTATION & STORAGE Stop the machine and allow it to cool before storing or batteries fitted, remove and secure separately cool dry and well-ventilated place that is inaccessible For transportation, secure the machine against MAINTENANCE WARNING Use only original manufacturer s replacement parts,
WARNING Servicing requires extreme care and knowledge product to your nearest authorized service center for For replacement line use only nylon filament line of the diameter described in the specification table of this After extending new cutter line, always return the Any part that is damaged should be properly repaired or Check all nuts, bolts and screws at frequent intervals for proper tightness to ensure the product is in safe INTENDED USE The product is designed for cutting grass, light weeds The cutting plane should be approximately parallel to the ground surface The product should not be used to cut or trim hedges, bushes or other vegetation where the cutting plane is not RESIDUAL RISK Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk operator should pay special attention to avoid the following: RISK REDUCTION It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud s Syndrome cold and dampness, diet, smoking and work practices are all thought to contribute to the development of the these operator to possibly reduce the effects of vibration: the unit wear gloves to keep the hands and wrists After each period of operation, exercise to increase If you experience any of the symptoms of this condition, immediately discontinue use and see your doctor about WARNING KNOW YOUR PRODUCT See page 7. Variable speed trigger Rear handle Lock-out trigger Front handle Curved shaft Grass deflector Line cut-off blade Cutting line Battery pack Battery latch button Charger Charger cable Spool cover Spool Eyelet SYMBOLS ON THE PRODUCT Safety alert Read and understand all instructions before operating the product, follow all Do not use metal blade(s) on the all bystanders a safe distance away from
Keep all bystanders, especially children and pets, at least 5m away from the Keep hands away from blades Waste electrical products should not Check with your local authority or retailer The following signal words and meanings are intended to explain the levels of risk associated with this product: DANGER Indicates an imminently hazardous situation, which, if WARNING Indicates a potentially hazardous situation, which, if not CAUTION Indicates a potentially hazardous situation, which, if not CAUTION Without safety alert symbol SYMBOLS IN THIS MANUAL Parts or accessories sold separately Waste electrical products should not Note Warning 4
RLT6X x x x x x x x x x x x 5
RLT6B x x x x x x x x x 6
4 5 9 6 0 7 8 4 5 7
5 6 4 8
4 7 8 9
p. p.4 p.6 p.7 p.8 0
4 4
5 6 5
6
7
04089v 8
PRODUCT SPECIFICATIONS Model RLT6X RLT6B Rated Voltage DC 6 Volts Maximum no-load speed 6,500 min - Cutting line diameter Cutting capacity Weight without battery pack 0 mm kg BATTERY AND CHARGER Model RLT6X RLT6B Battery pack BPL66 Not included Weight - Charger BCL60 - Compatible battery packs BPL650D REPLACEMENT PART Complete spool RAC07
Imported by: Techtronic Industries (Australia) Pty. Ltd. Level, 660 Doncaster Road Doncaster, VIC 08, Australia Techtronic Industries New Zealand Ltd. 8-6 Amelia Earhart Avenue Mangere, Auckland 0, New Zealand 9647805-0