4815RR1,4810RR RR1,14810RR1

Size: px
Start display at page:

Download "4815RR1,4810RR RR1,14810RR1"

Transcription

1 4815RR1,4810RR RR1,14810RR1 This Manual applies to Models: 4815RR1, 4810RR1, 14815RR1, 14810RR1 FLEX-WING ROTARY CUTTERS / SHREDDERS Published 07/16 Part No

2

3

4

5 To the Owner/Operator/Dealer This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the implement at all times. A Manual canister is provided on the implement where this manual can be properly stored. If you lose or damage this manual a free replacement manual can be obtained from an authorized Bush Hog dealer or by down loading the manual from the Bush Hog website BEFORE YOU START!! READ, UNDERSTAND, and FOLLOW the information provided in this manual, the AEM Mower Safety manual and the tractor operator's manual carefully to learn how to operate and service your machine properly. Failure to do so could result in personal injury to you and bystanders. All implements with moving parts are potentially hazardous. Every effort has been made to ensure that the machine is safe but operators must avoid engaging in unsafe practices and follow the written instructions provided. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. SAFETY FIRST. Completely read and understand the safety section of this manual before operating this equipment. Do not allow anyone to operate this equipment who has not fully read and understood this manual.contact your Dealer to explain any instructions that you do not fully understand. The care you give your Bush Hog Implement will greatly determine your satisfaction with its performance and its service life. Carefully read and follow the instructions in this manual to provide you with a thorough understanding of your new implement and its intended use and service requirements. All references made in this manual to right, left, front, rear, top or bottom are as viewed facing the direction of forward travel with the implement properly attached to the tractor. Replacement Parts information is located in a separate Parts Manual. Bush Hog mowers use balanced and matched system components for blade carriers, blades, cutter shafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Bush Hog specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of "will fit" parts may reduce mower performance, void warranties, and present a safety hazard. Use genuine Bush Hog mower parts for economy and safety. For future reference, record your Bush Hog product model number and serial number. Dealer Telephone Model Number Owner Purchase Date Serial Number SERIAL NUMBER LOCATION

6 DEALER to CUSTOMER Pre-Delivery/ Operation Instructions Dealer should inform the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable.dealer should inform Purchaser to review the contents of the Operator s Manual including safety equipment, safe operation, and maintenance, to review the Safety Signs on the implement (and tractor if possible),and of Purchaser s responsibility to train his/her operators s in safe operation procedures. IMPLEMENTS: I have explained that Deflectors, Chain Guards, or Solid Skirts must be installed and maintained ingood repair. DRIVELINES: I have made certain that all driveline, gearbox, and other shields are in good repair and fastened securely in place to prevent injuries from entanglement or thrown objects. HYDRAULIC MACHINES: I have explained the necessity of using clean hydraulic oil, changing filters as instructed, stopping leaks, damage caused by operating with over-heated oil, caring for hoses, using hoses of proper rating, maintaining the specified operating pressure and the potential hazard of oil s penetrating the skin. FOLDING-TYPE IMPLEMENTS: I have explained that it is not possible to guard against thrown objects when the head is lifted off ground and that operator is responsible to watch out for persons in the area. I have explained that the lifted mower head or boom can contact overhead obstructions with damage to cables and telephone lines and possible injury. I have explained that the extended head or boom or retracted boom cancontact power lines with resulting electrocution, injury or death and that operator is responsible for keeping clear of such hazards. PRE-DELIVERY SERVICE CHECK AND ADJUST OR LUBRICATE AS REQUIRED See Operator s Manual for Details Inspection Performed - Warranty and Safety Procedures Explained - Installation Complete LUBRICATION & HYDRAULICS Gearbox (Oil Levels) Hydraulic Oil Level (External Tank) Tractor Hydraulic Oil Level Hydraulic Hoses (Not Kinked Tighten Connections) Front Pump Drive (Assembly Is Tight And Shaft Properly Aligned) MOWER Spindle And Motor Bolts Properly Torqued Spindle Oil Level Blade Carrier Bolts Properly Torqued/Retaining Pin In Place Mower Cutting Height And Level Adjusted Cutting Shaft Bearings Lubricated All Hardware Properly Torqued Tire and Air Pressure/Lug Nuts (Correct Torque) Wheel Bearings (Check, Grease, and Preload) ATTACHMENTS & INSTALLATION Deflectors Front And Rear Shredding Attachments Correct Blade Rotation Direction Axle Arms And Beams Tongue And Control Rods (Installed And Adjusted) All Bolts - Pins And Nuts (Proper Torque) MOWER TO TRACTOR CONNECTIONS Draw Bar Length (Check And Set) A-Frame Pivot & Links Control Rods (Adjusted Equal) Axle Height (Adjusted) Cutting Height (Adjust) Mount Kit-Pre-Operation Check Complete Mower Wing (Adjust Level With The Center) Mower Wing (Check For Proper Raising Operation) C.V. Driveline (Check Max Turn Radius) Pull Type Hitch (Height Adjustment) Mounting Hardware Properly Torqued SAFETY ITEMS Protective Shields (Operation And Installation) Driveline Clutch (Torque Limiter) (Adjust And Run In) Safety Decals (Installed) Operator s Manual (Supplied) Tractor PTO Shield (Installed) S.M.V. Emblem (Installed If Needed) Tongue Jack (Installation and Operation) Safety Tow Chain (Installed) ADMA Driveline Safety Manual Supplied AEM Mower Safety Manual (Supplied in Canister) AEM Mower Safety Video has been shown to Purchaser

7 TABLE OF CONTENTS SAFETY SECTION GENERAL SAFETY INSTRUCTIONS AND PRACTICES OPERATOR SAFETY CRUSHING HAZARDS CONNECTING OR DISCONNECTING IMPLEMENT SAFETY THROWN OBJECTS HAZARDS THROWN OBJECTS HAZARD(CONTINUED) RUN OVER HAZARDS PTO ENTANGLEMENT HAZARDS MOWER BLADE CONTACT HAZARDS HIGH PRESSURE OIL LEAK HAZARD ELECTRICAL & FIRE HAZARD TRANSPORTING HAZARDS HAZARDS WITH MAINTENANCE OF IMPLEMENT PARTS INFORMATION Decal Location Decal Description Federal Laws and Regulations INTRODUCTION SECTION Equipment Specifications KEY OPERATION POINTS Limited Warranty ASSEMBLY SECTION DEALER SET-UP INSTRUCTIONS ASSEMBLY Tongue Hose Holder LINKAGE RODS TIRES AND WHEELS HYDRAULICS DRIVELINE ATTACHMENT TO IMPLEMENT CV DRIVELINE CENTER DRIVELINE WING DRIVELIN DRIVELINE ATTACHMENT OPERATION SECTION OPERATOR REQUIREMENTS TRACTOR REQUIREMENTS ROPS and Seat Belt Tractor Safety Devices Tractor Horsepower Drawbar Tractor Hydraulics Front End Weight Power Take Off (PTO) Tire Spacing GETTING ON AND OFF THE TRACTOR Boarding the Tractor Dismounting the Tractor STARTING THE TRACTOR...4-8

8 CONNECTING THE MOWER TO THE TRACTOR Connecting Mower Tongue to the Tractor Connecting Mower Hydraulic Lines to the Tractor SETTING THE MOWER Setting Deck Height Setting Deck Pitch DRIVELINE ATTACHMENT Driveline Length Check Constant Velocity (CV) Driveline PRE-OPERATION INSPECTION AND SERVICE Tractor Pre-Operation Inspection/Service Mower Pre-Operation Inspection/Service Cutting Component Inspection Blade Bolt Inspection DRIVING THE TRACTOR AND IMPLEMENT Starting the Tractor Brake and Differential Lock Setting Operating the Mower Wings Transport Position Operating Position Driving the Tractor and Cutte OPERATING THE TRACTOR AND IMPLEMENT Foreign Debris Hazards Bystanders/Passersby Precautions Engaging the Power Take Off (PTO) PTO RPM and Ground Speed Operating the Mower Right of Way (Highway) Mowing Shutting Down the Implement DISCONNECTING THE MOWER FROM THE TRACTOR MOWER STORAGE TRANSPORTING THE TRACTOR AND IMPLEMENT Tire and Wheels Transporting on Public Roadways Lighting & Marking of Agricultural Equipment Hauling the Tractor and Implement TROUBLE SHOOTING GUIDE MAINTENANCE SECTION HAZARDS WITH MAINTENANCE OF IMPLEMENT PARTS INFORMATION Lubrication CENTER & WING GEARBOXES DIVIDER GEARBOX MAIN CV DRIVELINE SAFETY SHIELD SLIP CLUTCH MAINTENANCE & ADJUSTMENT BLADE SERVICING & REMOVAL / 5/10 Blade Bolt Inspection BLADE HOLDER ASSEMBLY Blade Removal Installation WHEEL HUB ASSEMBLY AXLE ARM SPRING TONGUE HIGH PRESSURE OIL LEAK HAZARD HYDRAULIC HOSES Flex Wing Hydraulic Cylinder Replacement Instructions STORAGE PROPER TORQUE FOR FASTENERS / 5-17

9 SAFETY SECTION Safety Section 1-1

10 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-2

11 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-3

12 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-4

13 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-5

14 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-6

15 SAFETY THROWN OBJECTS HAZARD (CONTINUED) MOWER OPERATION: DO NOT exceed mower's rated Cutting Capacity or cut non-vegetative material. USE ENCLOSED TRACTOR CABS when two or more mowers are operating in mowing area. Do Not mow in areas where bees or insects may attack unless you WEAR PROTECTIVE CLOTHING or use enclosed tractor cab. ADJUST mower sections or wing close and parallel to ground without exposing blades. ADJUST cutting HEIGHT to AVOID BLADE CONTACT with solid objects like wire, rocks, posts, curbs, guard rails and fixed obstructions. DO NOT operate mower when mower wing(s) is raised or in transport position. STOP MOWING immediately if blades strike heavy objects, fixed structures, metal guard rails and concrete structures: 1. BLADES CAN FAIL from impact and objects can be thrown with great velocity. 2. INSPECT and REPLACE any damaged blades. 3. CHECK blade carrier and REPLACE if damaged. DO NOT mow in standing water TO AVOID possible BLADE FAILURE. AVOID MOWING in reverse: 1. STOP PTO and back up mower. 2. LOWER mower, engage PTO and mow forward. STOP PTO and BLADES when raising wings or the mower to transport position. DO NOT ENGAGE PTO with mower in transport position. STOP mowing when EXCESSIVE VIBRATION occurs: 1. STOP PTO and tractor ENGINE. 2. INSPECT mower for vibration source. 3. REPLACE any damage parts and bent or damaged BLADES. PN TO01-X SAFETY 4815/4810/14815/ /16 Safety Section 1-7

16 SAFETY RUN OVER HAZARD SAFETY TO AVOID SERIOUS INJURY OR DEATH FROM FALLING OFF TRACTOR OR EQUIPMENT RUN OVER: USE ROPS and SEAT BELT equipped tractors for mowing operations. KEEP ROPS locked in UP position. ONLY start tractor while seated in tractor seat. ALWAYS BUCKLE UP seat belt when operating tractor and equipment. ONLY OPERATE tractor and equipment while seated in tractor seat. NEVER ALLOW RIDERS on tractor or implement. WHEN MOUNTING AND DISMOUNTING TRACTOR: ONLY mount or dismount when tractor and moving parts are stopped. STOP ENGINE AND PTO, engage parking brake, lower implement, allow all moving parts to stop and remove key before dismounting from tractor. PN RO /4810/14815/ /16 Safety Section 1-8

17 SAFETY PTO ENTANGLEMENT HAZARDS SAFETY KEEP AWAY FROM ROTATING DRIVELINES AND ELEMENTS TO AVOID SERIOUS INJURY OR DEATH: STAY AWAY and KEEP hands, feet and body AWAY from rotating blades, drivelines and parts until all moving elements have stopped. STOP, LOOK and LISTEN before approaching the mower to make sure all rotating motion has stopped. ROTATING COMPONENTS CONTINUE to ROTATE after the PTO is shut off. PTO SHIELDING: TO AVOID SERIOUS INJURY OR DEATH FROM ENTANGLEMENT WHEN OPERATING IMPLEMENT: KEEP PTO shields, integral driveline shields and input shields installed DO NOT OPERATE mower without shields and guards in place or missing REPAIR OR REPLACE if damage, broken or missing ALWAYS REPLACE GUARDS that have been removed for service or maintenance. Do Not use PTO or PTO guard as a step. TO AVOID broken driveline during operations: CHECK driveline for proper length between PTO shaft and implement gearbox shaft.(refer to Instructions in Operation Section) Drivelines too short can pull apart or disengage. Drivelines too long can bottom out.bottoming driveline telescoping assembly will stop sliding and become solid. Driveline bottoming can push through support bearings and break off PTO shaft AVOID sharp turns or lift mower to heights to cause driveline "knocking". Lubricate driveshaft-telescoping components weekly. CONTACT DEALER if implement driveline does not match Tractor PTO shaft: DO NOT USE PTO ADAPTER. Using a PTO adapter can cause excessive vibration, thrown objects, blade and implement failures by dou bling operating speed. Increased working length exposing unshielded driveline areas. PN PE /4810/14815/ /16 Safety Section 1-9

18 SAFETY MOWER BLADE CONTACT HAZARDS SAFETY KEEP AWAY FROM ROTATING BLADES TO AVOID SERIOUS INJURY OR DEATH FROM BLADE CONTACT: HIGH PRESSURE OIL LEAK HAZARD 4815/4810/14815/ /16 Safety Section 1-10

19 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-11

20 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-12

21 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-13

22 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-14

23 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-15

24 SAFETY ITEM PART NO. QTY TYPE DESCRIPTION SAFETY 1. D546 4 DANGER Rotating Driveline 2. D614 6 DANGER Thrown Object Shield Missing 3. D587 1 INSTRUCT Lubrication 4. D549 1 DANGER Multi Hazard 5. D555 2 DANGER Shield Missing IMPORTANT Slip Clutch 7. D559 1 WARNING Use Bush Hog Genuine Parts 8. D565 2 DANGER Crushing Hazard 9. D553 1 WARNING Hydraulic Pressure/Towing 10. D547 1 DANGER 540 RPM 11. D548 1 DANGER 1000 RPM 12. D551 2 WARNING Torque Bolts/Blade Rotation CCW 13. D552 1 WARNING Torque Bolts/Blade Rotation CW IMPORTANT Driveline Lube INSTRUCT Gearbox Warranty 16. D544 1 IMPORTANT Transport Latch REFLECT Red REFLECT Amber INSTRUCT This Side Up 20. D762 1 WARNING Jackstand LOGO Bush Hog MODEL MODEL MODEL MODEL IMPORTANT Manual Canister 24. D575 1 DANGER Crushing Hazard REFLECT SMV 26. D813 1 DANGER Multi Language 4815/4810/14815/ /16 Safety Section 1-16

25 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-17

26 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-18

27 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-19

28 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-20

29 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-21

30 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-22

31 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-23

32 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-24

33 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-25

34 SAFETY SAFETY 4815/4810/14815/ /16 Safety Section 1-26

35 INTRODUCTION SECTION Introduction Section 2-1

36 INTRODUCTION INTRODUCTION 4815/4810/14815/ /16 Introduction Section 2-2

37 INTRODUCTION INTRODUCTION NOTE: All references made in this manual to right, left, front, rear, top or bottom are as viewed facing the direction of forward travel with implement properly attached to tractor. The Models 4815/14815 Rotary Cutter consists of a center unit with two variable position wings together having a cutting width of 15 feet (4.6m). The Models 4810/14810 Rotary Cutter consists of a center unit with one variable position wing together having a cutting width of 10-1/2 feet (3.2m). Wing operating angles and machine cutting height are independently controlled using hydraulic cylinders. A self-leveling linkage maintains a level cutter at all cutting heights. Power from the tractor PTO is split at the power divider gearbox and supplied to each of the blade gearboxes. Each blade gearbox has two free-swinging uplift blades designed to cut grass, corn stalks and light brush. Free-swinging blades reduce the shock of impact when a stationary object is hit. Slip clutches are installed on each gearbox for additional protection. Front and rear discharge shields are included as standard equipment. Equipment Specifications 4815/ / / /14810 Cutting Width Blade Tip Speed 540 PTO 1000 PTO Transport Width Center 16,000 FPM 16,000 FPM Overall Width Wings 16,000 FPM 16,000 FPM Overall Length Cutting Height Gearbox Rating HP Required (min) 60HP 60HP Power Divider 250 HP 250 HP Cutting Capacity (max) 4 4 Center & Wings 225 HP 225 HP Drawbar Load Rating (min) 2,158 lbs 2,158 lbs LImited Warranty 6 Year 6 Year Wing Flex Up Wing Flex Down Driveline Size Main CAT 6 CAT 6 Wings CAT 5 CAT /4810/14815/ /16 Introduction Section 2-3

38 INTRODUCTION KEY OPERATION POINTS Cutting performance and distribution are best when cutter is level from side to side. Mower front to rearpitch should be 1 or less. INTRODUCTION In extra heavy material, rear chains will allow better discharge and better distribution than solid rear deflectors or bands. Never operate the Flexwing below full PTO speed of 540 or 1000 rpm. For good distribution, the distribution baffles must be used. Make sure PTO driveline slip clutches are not frozen and are properly adjusted. To reduce uneven grass cutting and streaking. -make sure tractor rear tire spacing is a minimum of 60 between the inside of the tires. -make sure blades are not bent and are in good condition. -reduce ground speed to allow more cutting time. If Tractor engine is lugging down, shift tractor to a lower gear ALWAYS OPERATE WITH THE WING HYDRAULIC CYLINDER CONTROL VALVES IN A FLOAT POSITION. For maximum performance and service life, Always use Genuine Bush Hog replacement parts. 4815/4810/14815/ /16 Introduction Section 2-4

39 INTRODUCTION INTRODUCTION 4815/4810/14815/ /16 Introduction Section 2-5

40 ASSEMBLY SECTION Assembly Section 3-1

41 ASSEMBLY ASSEMBLY 4815/4810/14815/ /16 Assembly Section 3-2

42 ASSEMBLY Tongue During shipping tongue is tilted back toward unit.roll tongue down into working position. Pin jackstand to tongue. Hose Holder Attach the Hose Holder to the mounting lug on the inside left strut of the tongue. Use the 5/8 x 2 bolt,5/8 nut and flatwasher provided. ASSEMBLY LINKAGE RODS Pin the leveling rods assemblies to the tongue using pin, flatwasher and cotter pins shipped with assembly. The slotted casting end should be attached to the tongue (Position for greasing). It may be necessary to raise the tongue slightly for the attachment of the leveling rod. Connect the oppisite end to the center-axle weldment using the pin and cotter pins shipped in the leveling rod assembly. 4815/4810/14815/ /16 Assembly Section 3-3

43 ASSEMBLY ASSEMBLY 4815/4810/14815/ /16 Assembly Section 3-4

44 ASSEMBLY ASSEMBLY 4815/4810/14815/ /16 Assembly Section 3-5

45 ASSEMBLY ASSEMBLY 4815/4810/14815/ /16 Assembly Section 3-6

46 ASSEMBLY HYDRAULICS All versions of the 4815/14815/4810/14810 are shipped from the factory with the plumbing attached. Be sure to check fittings prior to use, to make sure they are tight. Fittings for attaching to the tractor remotes or independent valves should be purchased locally to fit the application. Plumb hydraulic cylinders as shown, (Hydraulic Hoses are supplied for attachment to three tractor remotes.) Plugs are supplied to adapt value for either an open or closed center tractor hydraulic system. Consult your tractor dealer to determine which type system your tractor has. Use tie straps to secure hydraulic hoses. 4815/14815 Plumbing Diagram Failure to match valve to tractor hydraulic system by using incorrect plug will cause damage to tractor. ASSEMBLY 4810/14810 Plumbing Diagram 4815/4810/14815/ /16 Assembly Section 3-7

47 ASSEMBLY DRIVELINE ATTACHMENT TO IMPLEMENT ASSEMBLY CV DRIVELINE 1. Secure the opposite end to the power divider gearbox using the tapered pin and locknut. Tighten nut to 30 ft. lbs. 2. Install driveline with the CV body attaching to the tractor PTO. 3. Pull on each driveline section to make certain it is securely attached. 4. Do not chain the CVF bell shielding. CENTER DRIVELINE NOTE: The center driveline is assembled too the unit at the factory and these instructions are for reinstallation,should it be removed for repair. Follow reverse order for driveline removal. 1. Assemble center section driveline as shown in Asm-R The driveline must be disassembled by removing the bolts holding the two halves together. Install clutch end to center section gearbox using tapered pin, lockwasher, and nut. Tighten to 30 ft. lbs. Slide yoke end onto power divider gearbox.reinstall bolts holding the two halves together. Note that the bolts must be installed so that nuts will be on clutch end. Rotate grease fittings to the top for easy access later. Bolt Holding 2 halves together Tighten to 30 ft. lbs. Clutch End to Center Section Gearbox 4815/4810/14815/ /16 Assembly Section 3-8

48 ASSEMBLY ASSEMBLY 4815/4810/14815/ /16 Assembly Section 3-9

49 OPERATION SECTION Introduction Section 4-1

50 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-2

51 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-3

52 OPERATION OPERATION 2158 lbs. 4815/4810/14815/ /16 Operation Section 4-4

53 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-5

54 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-6

55 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-7

56 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-8

57 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-9

58 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-10

59 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-11

60 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-12

61 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-13

62 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-14

63 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-15

64 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-16

65 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-17

66 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-18

67 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-19

68 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-20

69 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-21

70 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-22

71 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-23

72 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-24

73 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-25

74 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-26

75 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-27

76 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-28

77 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-29

78 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-30

79 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-31

80 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-32

81 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-33

82 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-34

83 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-35

84 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-36

85 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-37

86 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-38

87 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-39

88 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-40

89 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-41

90 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-42

91 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-43

92 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-44

93 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-45

94 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-46

95 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-47

96 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-48

97 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-49

98 OPERATION OPERATION 4815/4810/14815/ /16 Operation Section 4-50

99 MAINTENANCE SECTION Introduction Section 5-1

100 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-2

101 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-3

102 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-4

103 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-5

104 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-6

105 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-7

106 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-8

107 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-9

108 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-10

109 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-11

110 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-12

111 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-13

112 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-14

113 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-15

114 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-16

115 MAINTENANCE MAINTENANCE 4815/4810/14815/ /16 Maintenance Section 5-17

116 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-26 SEGURIDAD

117 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-25 SEGURIDAD

118 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-24 SEGURIDAD

119 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-23 SEGURIDAD

120 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-22 SEGURIDAD

121 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-21 SEGURIDAD

122 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-20 SEGURIDAD

123 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-19 SEGURIDAD

124 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-18 SEGURIDAD

125 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-17 SEGURIDAD

126 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-16 SEGURIDAD

127 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-15 SEGURIDAD

128 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-14 SEGURIDAD

129 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-13 SEGURIDAD

130 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-12 SEGURIDAD

131 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-11 SEGURIDAD

132 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-10 SEGURIDAD

133 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-9 SEGURIDAD

134 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-8 SEGURIDAD

135 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-7 SEGURIDAD

136 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-6 SEGURIDAD

137 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-5 SEGURIDAD

138 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-4 SEGURIDAD

139 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-3 SEGURIDAD

140 SEGURIDAD 4815/4810/14815/ /16 Sección Seguridad 1-2 SEGURIDAD

141 4815/4810/14815/ /16 Sección de Seguridad 1-1

142

143

144

145 Placa de Número de serie

146 4815RR1,4810RR RR1,14810RR1

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR 1. PRINT FIRMLY. 2. REMOVE WHITE COPY FOR CUSTOMER RECORDS. 3. REMOVE YELLOW

More information

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR 1. PRINT FIRMLY. 2. REMOVE WHITE COPY FOR CUSTOMER RECORDS. 3. REMOVE YELLOW

More information

SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY.

SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY. SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY. 1. Wear personal protective equipment such as, but not limited to protection

More information

Models 2308 ROTARY MOWER

Models 2308 ROTARY MOWER 2308 SERIES Models 2308 ROTARY MOWER Rigid Deck / Multi Spindle Publish Date 10//15 Manual Part No. 50075993 This Operator's Manual is an integral part of the safe operation of this machine and must be

More information

SQ84T SQUEALER. Dual Spindle Offset Lift Type Rotary Mower Published 01/19 Part No Alamo Group Inc.

SQ84T SQUEALER. Dual Spindle Offset Lift Type Rotary Mower Published 01/19 Part No Alamo Group Inc. SQ84T SQUEALER Dual Spindle Offset Lift Type Rotary Mower Published 01/19 Part No. 50075492 This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with

More information

RMB 1445 BUSH HOG REAR-MOUNT BOOM MOWER Griffin Ave. Selma, AL Alamo Group Inc.

RMB 1445 BUSH HOG REAR-MOUNT BOOM MOWER Griffin Ave. Selma, AL Alamo Group Inc. RMB 1445 REAR-MOUNT BOOM MOWER Published 02/13 Part No. 50068815 OPERATOR S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit

More information

2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER

2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER 0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions

More information

Performance You Can Count On FLEX-WING ROTARY CUTTERS

Performance You Can Count On FLEX-WING ROTARY CUTTERS Performance You Can Count On FLEX-WING ROTARY CUTTERS 1812 1815 2215 2810 2815 3810 3815 4815 2820 1812 FLEX-WING ROTARY CUTTER The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO

More information

10 Ft Flex Wing New*Roadside Cutters

10 Ft Flex Wing New*Roadside Cutters Bush Hog TOUGH 10 Ft Flex Wing New*Roadside Cutters * Featuring NEW Bush Hog TOUGH 2710L Flex Wing Roadside Cutter Unit Is Available In Right Or Left Hand Version The Only 10 Ft Roadside Cutters Built

More information

BH200 SERIES ROTARY CUTTER

BH200 SERIES ROTARY CUTTER Revised Published01/19 BH200 SERIES ROTARY CUTTER PARTS MANUAL SECTION 121 MODELS BH215, BH216, BH217 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the

More information

FLEX-WING ROTARY CUTTERS

FLEX-WING ROTARY CUTTERS FLEX-WING ROTARY CUTTERS 1812 FLEX-WING ROTARY CUTTER The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO horsepower of 50 to 75. The narrow cutting width of 12-feet makes this Flex-Wing

More information

PARTS MANUAL SECTION. Models 295, 296, 297, 1297 ROTARY MOWER

PARTS MANUAL SECTION. Models 295, 296, 297, 1297 ROTARY MOWER 0 Series Models,,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and

More information

Part Number Published 08/ Series Blade. 181 Series Blade

Part Number Published 08/ Series Blade. 181 Series Blade 141 SERIES 181 SERIES Published 08/15 Part Number 50076192 141 Series Blade 181 Series Blade To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute

More information

320 Series Models 325, 326, 327

320 Series Models 325, 326, 327 0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and

More information

GROUNDSMASTER. 52 Recycler. for 120 Traction Unit. Model No & UP. Operator s Manual

GROUNDSMASTER. 52 Recycler. for 120 Traction Unit. Model No & UP. Operator s Manual FORM NO. 8-980 Rev A GROUNDSMASTER 5 Recycler for 0 Traction Unit Model No. 077 79000 & UP Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety

More information

OPE R AT O R S MANU A L QUICK-HITCH ADAPTER. 5BP (Field conversion kit)

OPE R AT O R S MANU A L QUICK-HITCH ADAPTER. 5BP (Field conversion kit) OPE R AT O R S MANU A L 5BP006750 (Field conversion kit) Manual 5BP97378B Date 06/8/05 SAFETY Take note! This safety alert symbol found throughout this manual is used to call your attention to instructions

More information

MULTI-SPINDLE ROTARY CUTTERS

MULTI-SPINDLE ROTARY CUTTERS Performance You Can Count On MULTI-SPINDLE ROTARY CUTTERS SQ & 2000 SERIES 3000 SERIES Nothing beats a Bush Hog! Bush Hog s entire line of multi-spindle rotary cutters is designed for heavy crop clearing,

More information

MULTI-SPINDLE ROTARY CUTTERS

MULTI-SPINDLE ROTARY CUTTERS MULTI-SPINDLE ROTARY CUTTERS SQ & 2000 Series MULTI-SPINDLE ROTARY CUTTERS Nothing beats a Bush Hog! Bush Hog s entire line of multi-spindle rotary cutters is designed for heavy crop clearing, pasture

More information

ProLine. 44 Mower. for 120 Traction Unit. Model No & Up. Operator s Manual

ProLine. 44 Mower. for 120 Traction Unit. Model No & Up. Operator s Manual FORM NO. 9 ProLine Mower for 0 Traction Unit Model No. 05 99000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety of others. Also become

More information

TT4101 Rotary Tedder

TT4101 Rotary Tedder TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N

More information

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0

More information

SINGLE SPINDLE ROTARY CUTTERS

SINGLE SPINDLE ROTARY CUTTERS SINGLE SPINDLE ROTARY CUTTERS RAZORBACK-SERIES ROTARY CUTTER AVAILABLE IN RED, ORANGE, BLUE, AND GREEN The Razorback-Series has Bush Hog s legendary durability and reliability built into each of the three

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY

More information

FINISHING MOWERS & TRI-DECKS

FINISHING MOWERS & TRI-DECKS FINISHING MOWERS & TRI-DECKS ATH SERIES AIR TUNNEL FINISHING MOWER IMPECCABLE GROOMING. If a beautiful, smooth, contoured appearance is important, you want Bush Hog. Our finishing mowers are ideal for

More information

Bush Hog Land Maintenance Parts May, 2017

Bush Hog Land Maintenance Parts May, 2017 Revised 05/17 Bush Hog Land Maintenance Parts May, 2017 TABLE OF CONTENTS ROTARY CUTTERS BH4-2, BH5-2, BH6-2 DESCRIPTION...PAGE NUMBER Tail Wheel Assembly (With Hub)...104A-1-1 Tail Wheel Assembly (Without

More information

Mulching and Finishing Mowers MP and FP

Mulching and Finishing Mowers MP and FP Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)

More information

OPERATOR'S MANUAL ROTARY CUTTER MAN0571 DS1260 / DS1260Q DS1440 / DS1440Q DSO1260 / DSO1260Q MDS1260/MDS1260Q MDS1440/MDS1440Q

OPERATOR'S MANUAL ROTARY CUTTER MAN0571 DS1260 / DS1260Q DS1440 / DS1440Q DSO1260 / DSO1260Q MDS1260/MDS1260Q MDS1440/MDS1440Q ROTARY CUTTER MAN0571 (Rev. 8/30/2013) DS1260 / DS1260Q DS1440 / DS1440Q DSO1260 / DSO1260Q MDS1260/MDS1260Q MDS1440/MDS1440Q Serial Number 1081498 & Above Also includes Service & Parts Information for

More information

TT4100 Rotary Tedder

TT4100 Rotary Tedder TT0 Rotary Tedder Serial numbers 0 and higher Illustrated Parts Breakdown Page Page Tongue Assembly S/N - Tongue Assembly S/N to Page Page Page Page Page Tongue Assembly S/N to Tongue Assembly S/N + Main

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: -0 RPM & -000 RPM SECTION: 9 0 Griffin Ave. Selma, Al. 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com April, 0 BUSH HOG/ LAND MAINTENANCE

More information

GROOMING MOWERS FM1012 FM1015 FM1017 REAR DISCHARGE. 5WPMAN0183 (Rev. 7/9/2008)

GROOMING MOWERS FM1012 FM1015 FM1017 REAR DISCHARGE. 5WPMAN0183 (Rev. 7/9/2008) O P E R A T O R S M A N U A L GROOMING MOWERS FM1012 FM1015 FM1017 REAR DISCHARGE 5WPMAN0183 (Rev. 7/9/2008) TO THE DEALER: Assembly and proper installation of this product is the responsibility of the

More information

BATWING ROTARY CUTTER BW1800X, BW1800XQ BW1260X, BW1260XQ OPERATOR'S MANUAL MAN0964. (Rev. 9/11/2013)

BATWING ROTARY CUTTER BW1800X, BW1800XQ BW1260X, BW1260XQ OPERATOR'S MANUAL MAN0964. (Rev. 9/11/2013) MAN0964 (Rev. 9/11/2013) BATWING ROTARY CUTTER BW1800X, BW1800XQ BW1260X, BW1260XQ OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer.

More information

Finishing Mower Estate 72

Finishing Mower Estate 72 Finishing Mower Estate 72 Owners/Operators Manual & Spare Parts List Issue Date: October 2011 1 Introduction Your FIELDMASTER Estate 72 Finishing Mower has been designed to do a range of work to your satisfaction.

More information

BATWING BW1800, BW1800Q BW1260, BW1260Q OPERATOR'S MANUAL MAN0500. (Rev. 11/13/2012)

BATWING BW1800, BW1800Q BW1260, BW1260Q OPERATOR'S MANUAL MAN0500. (Rev. 11/13/2012) MAN0500 (Rev. 11/13/2012) BATWING BW1800, BW1800Q BW1260, BW1260Q OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual

More information

ROTARY MOWER OPERATION, SERVICE & PARTS MANUAL FOR

ROTARY MOWER OPERATION, SERVICE & PARTS MANUAL FOR ROTARY MOWER OPERATION, SERVICE & PARTS MANUAL FOR L-G-40-40-P, L-G-48-40-P, L-G-60-40-P & L-G-72-40-P Slip Clutch Models: L-G-60-40-SC-P & L-G-72-40-SC-P February 2003 FORM: RotMwrBook.QXD TABLE OF CONTENTS

More information

REAR MOUNTED BOOM MOWER PA6570. Parts Manual. Alamo Industrial 1502 E. Walnut Seguin, Texas alamo-industrial.

REAR MOUNTED BOOM MOWER PA6570. Parts Manual. Alamo Industrial 1502 E. Walnut Seguin, Texas alamo-industrial. REAR MOUNTED BOOM MOWER PA6570 Parts Manual Alamo Industrial 1502 E. Walnut Seguin, Texas 78155 830-379-1480 alamo-industrial.com An Operator's Manual was shipped with the equipment in the Manual Canister.

More information

EverythingAttachments.com

EverythingAttachments.com EverythingAttachments.com 60 Xtreme Duty Brush Cutter Owner s Manual SAFETY GENERAL SAFETY INSTRUCTIONS AND PRACTICES A careful operator is the best operator. Safety is of primary importance to the manufacturer

More information

BUSH HOG. Operator s Manual FLEX-WING ROTARY CUTTER ASSEMBLY OPERATION MAINTENANCE. Part No

BUSH HOG. Operator s Manual FLEX-WING ROTARY CUTTER ASSEMBLY OPERATION MAINTENANCE. Part No BUSH HOG 2315 FLEX-WING ROTARY CUTTER Operator s Manual ASSEMBLY OPERATION MAINTENANCE 797 $4.00 Part No. 91885 CONGRATULATIONS! You have invested in the best implement of its type on the market today.

More information

6' & 7' Superrr highway and 7' predatorrr

6' & 7' Superrr highway and 7' predatorrr YOU'RE ALWAYS AHEAD...WITH A MODERN BEHIND. 6' & 7' Superrr highway and 7' predatorrr Operator's Manual go galvanized! P.O. Box 790 Beaumont, Tx 77704 409.833.2665 1.800.231.8198 Fax: 409.726.8333 www.modernusa.com

More information

2820/12820 SECTION 103. This Manual applies to Models: 2820R1, 12820R1, 12820S1 2820RR1, 12820RR1, 12820SR1 FLEX WING ROTARY CUTTER/SHREDDER

2820/12820 SECTION 103. This Manual applies to Models: 2820R1, 12820R1, 12820S1 2820RR1, 12820RR1, 12820SR1 FLEX WING ROTARY CUTTER/SHREDDER 0/0 This Manual applies to Models: 0R, 0R, 0S 0RR, 0RR, 0SR FLEX WING ROTARY CUTTER/SHREDDER Published 0/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual

More information

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER NO. 3640 OPERATOR S MANUAL TO THE OWNER: Congratulations on your purchase of a new W & A Top Leveling Stacker Level Bander. Your selection is an indication

More information

Reel Mower TRM 5138 and TRM 7192

Reel Mower TRM 5138 and TRM 7192 Reel Mower TRM and TRM Parts Manual Locke Turf 0 Highway E, Opp, Alabama () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing

More information

BATWING ROTARY CUTTER BW240X, BW240XQ OPERATOR'S MANUAL MAN0725. (Rev. 10/17/2017)

BATWING ROTARY CUTTER BW240X, BW240XQ OPERATOR'S MANUAL MAN0725. (Rev. 10/17/2017) MAN0725 (Rev. 10/17/2017) BATWING ROTARY CUTTER BW240X, BW240XQ OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual

More information

New. Bush Hog TOUGH. SqUealer Series rotary Cutters. Loaded With Bush Hog TOUGH Features

New. Bush Hog TOUGH. SqUealer Series rotary Cutters. Loaded With Bush Hog TOUGH Features New Bush Hog TOUGH SqUealer Series rotary Cutters Loaded With Bush Hog TOUGH Features Bush Hog Squealer Series Rotary Cutters deliver performance the first day on the job and for years to come. They are

More information

BATWING- ROTARY CUTTER BW180X BW180XQ BW126X BW126XQ OPERATOR'S MANUAL MAN0962. (Rev. 9/1/2016)

BATWING- ROTARY CUTTER BW180X BW180XQ BW126X BW126XQ OPERATOR'S MANUAL MAN0962. (Rev. 9/1/2016) MAN0962 (Rev. 9/1/2016) BATWING- ROTARY CUTTER BW180X BW180XQ BW126X BW126XQ OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer.

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00

More information

Smart-Till. Models ST101, ST151, ST203, and ST303. HCC, inc st Avenue Mendota, IL

Smart-Till. Models ST101, ST151, ST203, and ST303. HCC, inc st Avenue Mendota, IL Owners Manual Smart-Till Models ST101, ST151, ST203, and ST303 HCC, inc. 1501 1st Avenue Mendota, IL 61342 815-539-9371 www.hccincorporated.com C-1159 May 2010 Safety Most work related accidents are caused

More information

BATWING- ROTARY CUTTER BW12 OPERATOR'S MANUAL MAN1078. (Rev. 9/1/2016)

BATWING- ROTARY CUTTER BW12 OPERATOR'S MANUAL MAN1078. (Rev. 9/1/2016) MAN1078 (Rev. 9/1/2016) BATWING- ROTARY CUTTER BW12 OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual instructions

More information

Published Part No. 4702C OPERATOR'S MANUAL

Published Part No. 4702C OPERATOR'S MANUAL WHEEL RAKE CARRIER Published 05-06 Part No. 4702C OPERATOR'S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ,

More information

Model 858-RH. Operating and Assembly Manual. Palmor Products Inc Serum Plant Road Thorntown, IN 46071

Model 858-RH. Operating and Assembly Manual. Palmor Products Inc Serum Plant Road Thorntown, IN 46071 Model 5-RH Operating and Assembly Manual Palmor Products Inc. 55 Serum Plant Road Thorntown, IN 6071 3/31/015 SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the

More information

BEFCO. Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE. AA4-120 (fits models Hop 209 & 212) DEFLECTOR

BEFCO. Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE. AA4-120 (fits models Hop 209 & 212) DEFLECTOR BEFCO Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE AA-0 (fits models Hop 09 & ) DEFLECTOR AA-0 (fits models Baby Hop 0 & 06) 009-95 (fits models Hop 0 & 06) 009-968

More information

BUSH HOG. Model 278 Rotary Cutter. OPERATION l MAINTENANCE. 05/09 Rev.1 $

BUSH HOG. Model 278 Rotary Cutter. OPERATION l MAINTENANCE. 05/09 Rev.1 $ BUSH HOG Model 278 Rotary Cutter Operator s Manual OPERATION l MAINTENANCE 05/09 Rev.1 $4.00 91077 CONGRATULATIONS! You have invested in the best implement of its type on the market today. The care you

More information

Reel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334)

Reel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334) Reel Mower TRM-0 Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing

More information

ROTARY CUTTER DS8.50/DS8.50Q DS10.50/DS10.50Q DSO8.50/DSO8.50Q DSO10.50/DSO10.50Q OPERATOR'S MANUAL MAN1168. (Rev. 10/16/2017)

ROTARY CUTTER DS8.50/DS8.50Q DS10.50/DS10.50Q DSO8.50/DSO8.50Q DSO10.50/DSO10.50Q OPERATOR'S MANUAL MAN1168. (Rev. 10/16/2017) ROTARY CUTTER MAN1168 (Rev. 10/16/2017) DS8.50/DS8.50Q DS10.50/DS10.50Q DSO8.50/DSO8.50Q DSO10.50/DSO10.50Q OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility

More information

Rotary Cutters RC5015 & RC6015 (540 RPM) and RCM5015 & RCM6015 (1000 RPM)

Rotary Cutters RC5015 & RC6015 (540 RPM) and RCM5015 & RCM6015 (1000 RPM) Rotary Cutters RC5015 & RC6015 (540 RPM) and RCM5015 & RCM6015 (1000 RPM) 15678 318-047M Operator s Manual! Read the Operator s Manual entirely. When you see this symbol, the subsequent instructions and

More information

Tube-Line Bale Processor Boss II

Tube-Line Bale Processor Boss II Tube-Line Bale Processor Boss II Operator's Manual 28686 (13/08/13) BOSS TWO SQUARE BALE PROCESSOR INTRODUTION Your BOSS TWO SQUARE BALE PROCESSOR is designed to load and shred all types of forage in large

More information

All Flex Grooming Mowers AFM4011, AFM4014 and AFM4016

All Flex Grooming Mowers AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers AFM4011, AFM4014 and AFM4016 22380 315-160M Operator s Manual! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions and warnings are serious

More information

BUSH HOG. ASSEMBLY l OPERATION l MAINTENANCE. 06/09 Rev. 1 $

BUSH HOG. ASSEMBLY l OPERATION l MAINTENANCE. 06/09 Rev. 1 $ BUSH HOG Model 2715 / 2710 Flex-Wing Rotary Cutter Operator s Manual ASSEMBLY l OPERATION l MAINTENANCE 06/09 Rev. 1 $4.00 50054473 CONGRATULATIONS! You have invested in the best implement of its type

More information

BUSH HOG. Model 4215 Rotary Cutter Operator s Manual. OPERATION l MAINTENANCE. 05/09 Rev. 1 $

BUSH HOG. Model 4215 Rotary Cutter Operator s Manual. OPERATION l MAINTENANCE. 05/09 Rev. 1 $ BUSH HOG Model 4215 Rotary Cutter Operator s Manual OPERATION l MAINTENANCE 05/09 Rev. 1 $4.00 91121 CONGRATULATIONS! You have invested in the best implement of its type on the market today. The care you

More information

Rotary Cutters RC5010 & RC6010 (540 RPM) and RCM5010 & RCM6010 (1000 RPM)

Rotary Cutters RC5010 & RC6010 (540 RPM) and RCM5010 & RCM6010 (1000 RPM) Rotary Cutters RC5010 & RC6010 (540 RPM) and RCM5010 & RCM6010 (1000 RPM) 16602 318-128M Operator s Manual! Read the Operator s Manual entirely. When you see this symbol, the subsequent instructions and

More information

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14 8 FLEX WING ROTARY CUTTER Published 09/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must

More information

Spearhead. Swipe E150/E180/E210. Parts Book

Spearhead. Swipe E150/E180/E210. Parts Book Spearhead Swipe E150/E180/E210 Parts Book 1 st Edition April 2009 Please ensure that this manual is handed to the operator before using the machine for the first time. The operator must fully understand

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,

More information

Operator s Manual. Table of Contents. RCR2584 Rotary Cutter. Copyright 2008 Printed M 7/14/08

Operator s Manual. Table of Contents. RCR2584 Rotary Cutter. Copyright 2008 Printed M 7/14/08 Operator s Manual RCR2584 Rotary Cutter 14397 Cover photo may show optional equipment not supplied with standard unit.! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions

More information

ROTARY CUTTER DS8.30 DS10.40 OPERATOR'S MANUAL MAN1167. (Rev. 8/13/2018)

ROTARY CUTTER DS8.30 DS10.40 OPERATOR'S MANUAL MAN1167. (Rev. 8/13/2018) MAN1167 (Rev. 8/13/2018) ROTARY CUTTER DS8.30 DS10.40 OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual instructions

More information

57 ROUGH CUT WITH ELECTRIC CLUTCH BLADE ENGAGEMENT OWNER S MANUAL. With Assembly Instructions For Model: MR55KE

57 ROUGH CUT WITH ELECTRIC CLUTCH BLADE ENGAGEMENT OWNER S MANUAL. With Assembly Instructions For Model: MR55KE 57 ROUGH CUT WITH ELECTRIC CLUTCH BLADE ENGAGEMENT OWNER S MANUAL With Assembly Instructions For Model: MR55KE KUNZ ENGINEERING, INC. / MENDOTA, IL 61342 / PH (815) 539-6954 01/05 ASSEMBLY INSTRUCTIONS

More information

SIDE FLAIL ASSEMBLIES

SIDE FLAIL ASSEMBLIES Current as of 9/7/2016 SIDE FLAIL ASSEMBLIES NH T4.90 PARTS LISTING WITH MOUNTING AND OPERATING INSTRUCTIONS Tiger Corporation 3301 N. Louise Ave. Sioux Falls, SD 57107 1-800-843-6849 1-605-336-7900 www.tiger-mowers.com

More information

BUSH HOG. ASSEMBLY l OPERATION l MAINTENANCE. 06/09 Rev1. $

BUSH HOG. ASSEMBLY l OPERATION l MAINTENANCE. 06/09 Rev1. $ BUSH HOG 2615L/2610L Flex-Wing Rotary Cutter Operator s Manual ASSEMBLY l OPERATION l MAINTENANCE 06/09 Rev1. $4.00 50018135 CONGRATULATIONS! You have invested in the best implement of its type on the

More information

PARTS MANUAL SECTION R1, 2215RR1-540 RPM 12215R1, 12215RR1-1000RPM FLEX WING ROTARY CUTTER. Published 07/16

PARTS MANUAL SECTION R1, 2215RR1-540 RPM 12215R1, 12215RR1-1000RPM FLEX WING ROTARY CUTTER. Published 07/16 225R, 225RR - 50 RPM 225R, 225RR - 000RPM FLEX WING ROTARY CUTTER Published 07/6 PARTS MANUAL SECTION 3 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of

More information

HT46X Rotary Tedder. Illustrated Parts Breakdown. Center Section

HT46X Rotary Tedder. Illustrated Parts Breakdown. Center Section HTX Rotary Tedder Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Center Section Hydraulics Outer Wing Assembly Center Bolted Components Tine Rotor and Hardware Tilt

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,

More information

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR Alamo Ind. Model Serial No. Purchase Date Purchaser Last Name Street & No.,

More information

BRUSHBULL ROTARY CUTTER BB6000X BB7200X BB8400X OPERATOR'S MANUAL MAN0680. (Rev. 10/24/2008)

BRUSHBULL ROTARY CUTTER BB6000X BB7200X BB8400X OPERATOR'S MANUAL MAN0680. (Rev. 10/24/2008) MAN0680 (Rev. 10/24/2008) BRUSHBULL ROTARY CUTTER TM BB6000X BB7200X BB8400X OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer.

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0

More information

FLX15 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO

FLX15 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO Published: /0 FLX ROTARY CUTTERS S/N A00000 A0000 inclusive PARTS MANUAL Part No. A0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this

More information

WOOD CHIPPER WC1103 5PQ (8/02/12)

WOOD CHIPPER WC1103 5PQ (8/02/12) O P E R A T O R ' S M A N U A L WOOD CHIPPER WC1103 5PQ990101 (8/02/12) To the Owner; Thank-You for choosing a quality product from Frontier Equipment. We strive to give you the best equipment and the

More information

ROTARY TILLER. Operation, Service & Parts Manual For P-P/C Series. November 1996 (Rev. 4-05) FORM: PTillerBook.QXD

ROTARY TILLER. Operation, Service & Parts Manual For P-P/C Series. November 1996 (Rev. 4-05) FORM: PTillerBook.QXD ROTARY TILLER Operation, Service & Parts Manual For P-P/C Series FORM: PTillerBook.QXD November 1996 (Rev. 4-05) TABLE OF CONTENTS Preparation......................................1 Assembly Instructions.............................2

More information

3308, 3308SH PARTS MANUAL SECTION ROTARY MOWER

3308, 3308SH PARTS MANUAL SECTION ROTARY MOWER 0, 0SH ROTARY MOWER Published / PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained

More information

Quiet Collector. Model No & Up

Quiet Collector. Model No & Up FORM NO. -8GB Rev A Quiet Collector Model No. 795-890000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety and the safety

More information

BUSH HOG. Model 2720 Flex-Wing Rotary Cutter Operator s Manual. OPERATION l MAINTENANCE. 06/09 Rev.1 $

BUSH HOG. Model 2720 Flex-Wing Rotary Cutter Operator s Manual. OPERATION l MAINTENANCE. 06/09 Rev.1 $ BUSH HOG Model 2720 Flex-Wing Rotary Cutter Operator s Manual OPERATION l MAINTENANCE 06/09 Rev.1 $4.00 50028833 CONGRATULATIONS! You have invested in the best implement of its type on the market today.

More information

Wheel Horse. 52 Mowers. Model No & Up Model No & Up. Operator s Manual

Wheel Horse. 52 Mowers. Model No & Up Model No & Up. Operator s Manual FORM NO. 9-567 Wheel Horse 5 Mowers for Lawn & Garden Tractors Model No. 7880 890000 & Up Model No. 7885 890000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about

More information

Operator s Manual. Table of Contents. Rotary Cutter RC35120 RCM Copyright 2008 Printed M 7/14/08

Operator s Manual. Table of Contents. Rotary Cutter RC35120 RCM Copyright 2008 Printed M 7/14/08 Operator s Manual RC35120 RCM35120 Rotary Cutter 10438 Cover photo may show optional equipment not supplied with standard unit.! Read the Operator s manual entirely. When you see this symbol, the subsequent

More information

HAMMER KNIFE FLAIL MOWER SHREDDER

HAMMER KNIFE FLAIL MOWER SHREDDER HAMMER KNIFE FLAIL MOWER SHREDDER Operation, Service, & Parts Manual For Models: GOL79 & GOL89 October 2010 FORM: GOLShredder.QXD TABLE OF CONTENTS Installation....................................................1

More information

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION

ALAMO INDUSTRIAL WARRANTY REGISTRATION INFORMATION TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR TEAR 1. PRINT FIRMLY. 2. REMOVE WHITE COPY FOR CUSTOMER RECORDS. 3. REMOVE YELLOW

More information

BUSH HOG. Model 3715/3710 Flex-Wing Rotary Cutter Operator s Manual. OPERATION l MAINTENANCE. 06/09 Rev.1 $

BUSH HOG. Model 3715/3710 Flex-Wing Rotary Cutter Operator s Manual. OPERATION l MAINTENANCE. 06/09 Rev.1 $ BUSH HOG Model 3715/3710 Flex-Wing Rotary Cutter Operator s Manual OPERATION l MAINTENANCE 06/09 Rev.1 $4.00 50029874 CONGRATULATIONS! You have invested in the best implement of its type on the market

More information

HT419H BUSH HOG. 2501Griffin Ave. Selma, Al Published 11/15 Part No

HT419H BUSH HOG. 2501Griffin Ave. Selma, Al Published 11/15 Part No Published Part No. 50076695 BUSH HOG 2501Griffin Ave. Selma, Al 36703 www.bushhog.com Read and understand the complete Warranty Statement Found in this Manual. Be sure at time of purchase your Dealer has

More information

ROTARY TILLER. Operation, Service & Parts Manual For "AS" Series. FORM: ASTillerBook.QXD

ROTARY TILLER. Operation, Service & Parts Manual For AS Series. FORM: ASTillerBook.QXD ROTARY TILLER Operation, Service & Parts Manual For "AS" Series FORM: ASTillerBook.QXD April 2002 TABLE OF CONTENTS Preparation......................................1 Assembly Instructions.............................2

More information

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount. HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards

More information

15' RAPTORRR CUTTER 15 RAPTOR CUTTER YOU'RE ALWAYS AHEAD...WITH A MODERN BEHIND.

15' RAPTORRR CUTTER 15 RAPTOR CUTTER YOU'RE ALWAYS AHEAD...WITH A MODERN BEHIND. SPRING 2016 15' RAPTORRR CUTTER 15 RAPTOR CUTTER Operator s Manual PART 1 OF 2 Operator s Manual YOU'RE ALWAYS AHEAD...WITH A MODERN BEHIND. LAST REVISION SUMMER 2012 P.O. BOx 790 BeaumOnt, tx 77704 409.833.2665

More information

610 BUSHEL MANURE SPREADER

610 BUSHEL MANURE SPREADER 610 BUSHEL MANURE SPREADER RODA MANUFACTURING 1008 LOCUST ST. HULL, IA. 51239 Art s-way Manufacturing 712-439-2366 Co., Inc. Hwy 9 West - PO Box 288 WWW.RODAMFG.COM Armstrong, IA. 50514 U.S.A 2 INTRODUCTION

More information

BATWING- ROTARY CUTTER BW15.50 BW15.50Q BW10.50 BW10.50Q OPERATOR'S MANUAL MAN1237. (Rev. 12/11/2017)

BATWING- ROTARY CUTTER BW15.50 BW15.50Q BW10.50 BW10.50Q OPERATOR'S MANUAL MAN1237. (Rev. 12/11/2017) MAN1237 (Rev. 12/11/2017) BATWING- ROTARY CUTTER BW15.50 BW15.50Q BW10.50 BW10.50Q OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer.

More information

BENGAL ASSEMBLIES PARTS LISTING WITH MOUNTING AND OPERATING INSTRUCTIONS

BENGAL ASSEMBLIES PARTS LISTING WITH MOUNTING AND OPERATING INSTRUCTIONS Current as of 1/ 26/2017 BENGAL ASSEMBLIES NH TS6.1XX T4B 4 WHEEL DRIVE PARTS LISTING WITH MOUNTING AND OPERATING INSTRUCTIONS Tiger Corporation 3301 N. Louise Ave. Sioux Falls, SD 57107 1-800-843-6849

More information

DM-135 DRUM MOWER USER S MANUAL

DM-135 DRUM MOWER USER S MANUAL DM-135 DRUM MOWER USER S MANUAL 1 DM135 DRUM MOWER INSTRUCTIONS CHAPTER 1 SAFE OPERATION Do not attempt to operate the mower until you have read the operator s manual and all the safety signs on the mower.

More information

TURF BATWING TBW150C OPERATOR'S MANUAL MAN0765. (Rev. 6/04/2018)

TURF BATWING TBW150C OPERATOR'S MANUAL MAN0765. (Rev. 6/04/2018) MAN0765 (Rev. 6/04/2018) TURF BATWING TBW150C OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual instructions and safety

More information

Price Per Loaded Mile:

Price Per Loaded Mile: SEQ. #416-612 MINNESOTA PRICING PAGES (Typed Responses Required) JUNE, 2012 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address:

More information

HERITAGE ROTARY CUTTER HC48 HC54 HC60 HC72 OPERATOR'S MANUAL MAN0670. (Rev. 9/4/2013)

HERITAGE ROTARY CUTTER HC48 HC54 HC60 HC72 OPERATOR'S MANUAL MAN0670. (Rev. 9/4/2013) MAN0670 (Rev. 9/4/2013) HERITAGE ROTARY CUTTER HC48 HC54 HC60 HC72 TM OPERATOR'S MANUAL TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual

More information

Rotary Brush Cutter. Model Number RBV. Serial Number. Serial Number and Greater. Maximum Flow Rate gpm. Phone: RBV

Rotary Brush Cutter. Model Number RBV. Serial Number. Serial Number and Greater. Maximum Flow Rate gpm. Phone: RBV Rotary Brush Cutter Model Number RBV. Serial Number. Serial Number 75 and Greater Maximum Flow Rate gpm. Phone: 0--700 0/5/0 Revised // RBV Features of Virnig Mfg. Inc. Rotary Brush Cutter include: diameter

More information

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER

W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER W & A 12 ROW TOP LEVELING STACKER LEVEL BANDER NO. 3640 OPERATOR S MANUAL TO THE OWNER: Congratulations on your purchase of a new W & A Top Leveling Stacker Level Bander. Your selection is an indication

More information

BOOM ARM MOWER ALAMO INDUSTRIAL E. Walnut Seguin, Texas

BOOM ARM MOWER ALAMO INDUSTRIAL E. Walnut Seguin, Texas BOOM ARM MOWER Published 02/10 Part No. 02924700C OPERATOR S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ,

More information

FINISH MOWERS. Discover the premium cut quality that makes Woods the undisputed leader in finish mowers

FINISH MOWERS. Discover the premium cut quality that makes Woods the undisputed leader in finish mowers FINISH MOWERS Discover the premium cut quality that makes Woods the undisputed leader in finish mowers Contents Finish Mowers Table of Contents Rear Discharge Mowers...4 RDC54 RD60 RD72 PRD6000 PRD7200

More information

Rotary Brush Cutter (Standard Flow)

Rotary Brush Cutter (Standard Flow) Rotary Brush Cutter (Standard Flow) Model Number RBV. Serial Number. Serial Number 6795-0050 Maximum Flow Rate gpm. For and 5 GPM Max Models Phone: 0-9-700 0/5/0 Revised // RBV Features of Virnig Mfg.

More information