Ultimate mobile, industrial grade, self-contained multipurpose structure.

Transcription

1 The Ultimate mobile, industrial grade, self-contained multipurpose structure. Product overview & application guide There s Nothing Else Like It

2 DESCRIPTION Transport Configuration Raised Roof Expanded Side Pods The Trans4mer is an industrial grade mobile work shelter. Transport is via tractor trailer and pup or on a large flat deck. It is designed to sit directly on any stable level ground. Foundations are not required. The center roof section telescopes to a height of 6 meters. The side pods which are contained within the center unit during transport, expand to create a 2 meters wide by 2.4 meters high by 11 meters long work area on each side of the center unit. They are supported by integral mechanical jacks. The roof and side pods are positioned using a crane or with optional integral hydraulics. Set up / take down time is approximately one to two hours. Installed Configuration with Generator Pup P.1

3 Transportation (closed) dimensions In transportation (closed) configuration the unit measure 4.8 meters wide by up to 15.2 meters long by 4 meters high. Overall weight is +/-31,700 kg. Other lengths are available. The optional pup trailer is 3 meters wide by 4.5 meters long and 2.6 meters high. It can be fitted with a self contained power generation unit. P.2 Sales: Engineering:

4 Installed (open) Dimensions Installed, the Trans4mer unit measures 9.1 meters wide by up to 15.2 meters long. The center section is 6 meters high with bay doors on one or both ends that measure 4.3 meters wide by 4.9 meters high. Each side pod is 2 meters wide by 11 meters long by 2.4 meters high. Multiple units can be joined together for additional space. No building permits are required and since it is portable it does not affect property values or taxes. These units transport like trailers and function like heavy duty commercial space when installed. 15.2m 6m 4.3m 4.9m 2m P.3 9.1m Floor Load Capacity = 56,700 kg.

5 Construction The construction is exterior sheet metal over polyurethane insulation (R-17.5 minimum), structural aluminum and high strength steel. The roof is designed for a minimum snow load of 1.68kPa. The design parameters far exceed that of conventional portable structures and they meet or exceed those of most site built facilities. It is ideally suited for remote locations and extreme climates. The minimum expected functional lifespan is 10 years. P.4 Sales: Engineering:

6 Interior The interior floor space of a 15.2 meters unit is approximately 139 square meters. The center floor has a capacity of 56,700kg (10.7kPa). There is a 2 meters x 2 meters electrical room located in one corner with a breaker panel and a transformer. The wiring is 3 phase and is customizable for almost any application including wet service. Within the floor is a 5600 liter waste water holding tank with trace wire radiant heat. This provides for containment of environmentally hazardous waste. Some of the most popular accessories include: 3.6 tonnes overhead gantry crane, hydraulic vehicle lifts, manual or automatic vehicle wash systems, air compressors, welders, milling machines, plasma cutters, table saws, power hack saws, and hydraulic presses. Many other customization options are available on request. P.5

7 Transport Configuration Raising the Roof P.6 Sales: Engineering:

8 Installed Configuration with Side Pods Extended Industrial Interior with Overhead Gantry Style Crane P.7

9 Single Story Configuration Standard Lengths 12.8m and 15.8m Style 1 Single Story No Side Pods Style 2 Single Story One 3m wide x 11m long Side Pod Syle 3 Single Story Two 1.8m wide x 11m long Side Pods Styles can be connected side to side and end to end for multi unit configurations. P.8 Sales: Engineering:

10 Two Story Configuration Standard Lengths 12.8m and 15.8m Style 4 Two Story (with or without mezzanine floor) No Side Pods Style 5 Two Story (with or without mezzanine floor) One 3m wide x 11m long Side Pod Style 6 Two Story (with or without mezzanine floor) Two 1.8m wide x 11m long Side Pods P.9 Styles can be connected side to side and end to end for multi unit configurations.

11 Custom multi-unit installation (approximately 900 square meters) P.10 Sales: Engineering:

12 Single Fire Hall / Apparatus Bay Double Fire Hall / Apparatus Bay Single Ambulance Station / Apparatus Bay Multiunit Apparatus Bay P.11

13 APPLICATIONS Portable buildings & portable structures Until now the traditional offering for portable work facilities has included light duty office trailer type products, soft sided tent like products, modified shipping container type products and modular semipermanent type products. Unfortunately none of these truly combine the features of being rapidly deployable and suitable for industrial, heavy duty applications. Typically the ones that are portable are light duty (office / accommodation applications) and the ones that are heavier duty require design services, foundations, building permits and long set up / take down times. The ultimate industrial grade, portable building and multipurpose structure changes all that. P.12 Sales: Engineering:

14 Portable Shops The Trans4mer is truly portable. It arrives as a tractor trailer unit and with the hydraulically automated telescoping roof and side pods it is operational in less than 2 hours. The interior of the unit is designed to be multi-purpose so is easily reconfigured for a variety of assignments. The ideal solution for work sites requiring facilities for visiting contractors or temporary projects. No foundations, no building permits, no assembly, no bs. Portable Work Bays The Trans4mer means your crew is out of the elements and working efficiently in an insulated and climate controlled environment within hours of arriving on site. Whether you re driving a bulldozer in for maintenance through the 4.3 meters wide by 4.9 meters high overhead doors or assembling equipment with the 3.6 tonnes gantry crane, you ve got everything you need on site. P.13

15 Portable Wash Bay The Trans4mer is ideal for light and heavy vehicle wash bays. Site cross contamination concerns and vehicle maintenance often dictate that vehicles and equipment need to be cleaned even though your kilometers from the nearest facilities. A Trans4mer unit equipped with either a fully automated drive through vehicle wash system or a manual pressure wash system is the solution. Our wash system partners have developed equipment that is customized specifically for use in the Trans4mer complete with recycling and filtration components. The trans4mer is wired for wet service conditions and includes a built in heated waste tank in the floor for containment. Portable Lube Bay Rolling equipment on remote sites requires regular lubrication schedules to maintain operating efficiency. The Trans4mer provides an on site, covered, secure, insulated and climate controlled maintenance facility equipped with spill containment, hoists and wheel lift, capabilities. Built in lubricant storage tanks with distribution pumps and hoses are part of the package. When your project is complete the asset can be quickly taken down and moved to the next site. P.14 Sales: Engineering:

16 Secure Portable Tool Crib / Material Storage The Trans4mer structure incorporates a high strength welded steel I beam floor system with welded structural aluminum walls and roof components. The foam core insulation has a rating of r17.5. Your unit arrives on site with tools and equipment in place and is as secure as your home shop. Materials and equipment can be driven directly into the unit through the overhead doors and loaded or unloaded with the 3.6 tonnes electric gantry crane. Portable Welding Shop Extreme weather conditions reduce efficiency by up to 75% and threatens the safety of your workers. The Trans4mer provides a self-contained, fully equipped, covered, environment controlled welding facility complete with a high capacity generator. Units are often fitted with multiple welders, plasma cutters, work stations and air quality controls. P.15

17 Portable Mechanics Bay Ask a heavy duty mechanic how much longer it takes to do a repair when he s under a frozen vehicle in -40 temperatures with limited access to power tools or lift equipment. Enough said? Portable Training Lab Trade schools, polytechnics and community colleges are frequently tasked with providing skilled labor training to remote and aboriginal communities to service demands of the natural resource and construction industry. One of the major challenges to institutions is providing a fully equipped training lab in multiple locations for the practical portion of the instruction. The Trans4mer provides a mobile campus that comes custom fitted with tools and equipment suitable to almost any trade. On completion of the 6 8 week course in one location the lab can be transported to the next community and even refitted for another trade. The portable training lab is set up and ready to go in less than a day and student are not required to leave their communities and incur lodging and travel expenses. In locations where building materials and construction services are not readily available, these units can serve as cost effective alternatives to site built structures. P.16 Sales: Engineering:

18 Command Centers / Administration Facilities Conventional portable administration facilities are often limited by typical trailer widths and ultra-light weight construction that is not suitable for emergency and remote location conditions. Industry experts endorse the ultimate portable building as an ideal solution. A portable, heavy duty, secure and affordable option for emergency operations and remote locations. Fire Halls and Apparatus Bays Hundreds of fire halls across North America are rebuilt or renovated each year. Because of the vital service they provide, these facilities cannot be closed during construction. The Extreme Portable Building is an effective turnkey solution. Rental and leasing options available. Mobile Medical Units The idea for this type of Mobile Medical Unit (MMU) originated with the desire to have a fully equipped portable medical facility available to attend events and respond to medical emergencies during the Olympics. After the Olympics, the MMU became a valuable permanent resource. In fact, it was found that MMUs are a unique asset that can serve a number of functions more efficiently and economically than site built or other types of portable structures. Medical emergency and natural disaster relief Temporary care facilities during hospital / clinic renovations Overflow beds during periods of high demand Special event support (concerts, festivals & sporting events) Permanent and / or temporary medical clinics for underserved remote and aboriginal communities. P.17

19 Environmental Considerations Integral waste containment system No ground disturbance No permanent foundations Removable on project completion Reusable and multipurpose Economic Considerations No foundations No engineering / design fees No property tax No building / regulatory permits Used units available on short notice / new units in 14 weeks Rapid deployment and take down Reusable and multipurpose Low maintenance Improved labor efficiency & safety Purchase and lease options High resale value P.18 Sales: Engineering:

20 ww.extremeportablebuildings.com ablebuildings.com Sales: Engineering: Giffen Road North Lethbridge, AB T1H5G1 Canada Design & Products protected under patents: CA A1, US