REVISIONS. App Thom. App Sud. App PC DD 2014/11/25

Size: px
Start display at page:

Download "REVISIONS. App Thom. App Sud. App PC DD 2014/11/25"

Transcription

1 1/11 REVISIONS Rev Description Rev n by Sud PC Thom VB LH Clyd r Act Issue Date YYYY/MM/DD 0 Initial Document Release RR 2012/03/ Revision of various details See list at end Added Specification identification numbers RR 2012/0/20 RR 2012/08/08 3 See List under endix A RR 2013/02/21 Revision includes section 6.7 & 6.8 DM 201/02/07 DD 201/11/25 Pending Pending Pending Pending Pending Pending 201/11/25 Sud = Sudbury, Ontario, PC = Port Colborne, Thom = Thompson, Manitoba, VB = Voisey s Bay, LH = Long Harbour, Act = Acton, England, Clyd = Clydach, Wales, N/A = Not licable

2 2/ PURPOSE This specification describes the minimum required vehicle systems and features for Heavy Vehicles which includes: medium-duty trucks, dump trucks, tank trucks, convoy trucks, flatbed trucks, explosive haulage trucks, vehicle mounted cranes, tire handler trucks, and other specialty trucks whether the equipment is owned, leased or rented. It includes equipment of regular and permanent service providers. This standard applies to vehicles used in surface plant operations. 2.0 APPLICATION This specification, applies at any Vale locations indicated with approval on the cover page, with the following exceptions: 2.1 EXCEPTIONS None. 3.0 REFERENCE DOCUMENTATION The following documents were used in the development of this document or have instructions and procedures applicable to it. They shall be used in their most recent revision. OO SHE 02 Mobile Equipment October 2010 SPEC Equipment Standard - Surface - Mobile Access Recommended Practice SPEC Equipment Standard - Surface - Safety Access and Maintenance Identification Vale Standard Vale Identification Guidelines for Vehicles and Heavy Equipment No.: INS-001-G Instructions on Requirements for Critical Activities Rev.: 03-27/12/ SCOPE This document outlines the general requirements that all Heavy Vehicles used on road and on Vale Canada properties may be subject to. Vale reserves the right to waive requirements or to impose additional requirements as deemed necessary upon specific machine reviews, and based on the location of use, or machine configuration.

3 3/ GENERAL REQUIREMENTS All vehicles originally constructed by the manufacturer (OEM) for use on mining / industrial properties will comply with all current applicable Federal, Provincial, and Territorial requirements. Vehicles will comply with current applicable industry standards for the design and construction of all vehicle systems and components. All vehicles originally constructed by the manufacturer (OEM) for use on public roadways will comply with all current applicable Federal, Provincial, and Territorial requirements for use as a licensed motor vehicle. Those requirements include but are not limited to: Crash worthiness including roll over protection Braking systems and performance Exterior lighting Driver and Passenger seating including seatbelts and supplemental restraints Automotive glass type and construction and location for use of each Vehicles will comply with current applicable automobile industry standards for the design and construction of all other vehicle systems and components. Vehicles will comply with all current applicable industry standards for the design and construction of all vehicle systems and components. 5.1 STANDARD VEHICLE SYSTEMS AND COMPONENT REQUIREMENTS Brakes Power assisted braking systems are required. Anti-lock brake systems (all wheel) are required where available within vehicle class Steering Power assisted steering systems are required Lights Standard headlights and taillights are required Reverse gear (backup) lights required Auxiliary work lights for night time operation as specified Auxiliary warning beacons or strobes required as specified.

4 / Engine / Exhaust Engines will meet applicable emissions regulations. Engines will be capable of being powered by fuel as designated by the end use site. Exhaust systems will meet all applicable regulations for noise regulation. Engine block heater required unless otherwise specified Horn Vehicle will be equipped with a horn for signaling purposes Transmission Transmissions will be automatic / power shift configuration unless otherwise specified by the end use site or by machine design Drivetrain Vehicles will be rear wheel drive unless otherwise specified. All wheel drive / -wheel drive systems may be required where specified. 5.2 OPERATORS COMPARTMENT Glass and Windows All windows in operator / passenger compartment areas will be fitted with automotive safety glass including laminated front windshields as prescribed by applicable regulations and industry standards. o Window operation will be manual unless power is provided as a standard feature. o Where power windows are provided they shall be configured such that controls cannot be accidentally activated to provide a choking hazard o Windows shall not be solar tinted beyond any prescribed Federal, Provincial or Territorial regulations Windshield Wipers Windshield wipers will be provided for all vehicles with windows enclosing the operator compartment. Configuration to be as follows: o To be provided on front widows o To be provided on rear and other side windows as required for safe operation o Will provide maximum area cleaning capacity o To stow out of normal view area as much as possible when not in use o Will have adjustable speeds

5 5/11 A spray washer system for use with the windshield wipers will be provided as well for all wiper locations Emergency Exit An emergency (alternate) exit from the operator compartment as well as routes to safely reach ground level will be provided Climate Control Operator compartment will be an enclosed environmental control design equipped with air conditioning and heating systems as appropriate for the area of operation Seating Seating o 3 point seatbelts for all occupants (lap belt not permitted) o Headrests for all occupants of vehicle o Drivers seat to be adjustable for position. Height adjustable where available o Seats to have cushioning and suspension systems designed to reduce vibration. o Driver seat may include air suspension system. 5.3 SAFETY SYSTEMS AND DEVICES Fire Extinguisher All vehicles will be equipped with an ABC rated fire extinguisher fitted with a gauge or other indicator to indicate they are properly charged or in a discharged condition. o Fire extinguisher size will be suitable for the vehicle o Fire extinguisher will be located such that it is readily accessible by a person standing at ground level or the operator compartment as appropriate. o Extinguishers to be mounted so as to not create a tripping hazard. o Fire extinguisher will be retained by an easy release bracket secured to the vehicle Fire Suppression System Not applicable

6 6/ Back Up Alarm All vehicles shall be fitted with an audible back-up alarm system activated automatically by the selection of reverse gear. o Alarm to be fitted to the rearmost portion of the vehicle o Where available, alarm to be configured such that it will increase volume to a set level above ambient noise until maximum volume is reached Guarding All rotating / moving parts will be guarded or provided with appropriate systems to protect operators or other personnel from possible entanglement or injury Speed Regulation Systems designed to regulate maximum vehicle speed may be required. o Speed limit to be specified by end use site Mirrors Vehicles will be equipped with two external rear view mirrors and one internal rear view mirror. Internal rear view mirror may be deleted for vehicles with no rear windows or sightline. Vehicles equipped to tow to be equipped with special extended viewing range mirrors to ensure capability to see around trailer. Power adjustable / heated mirrors may be required. Requirement to be specified by end-user site Identification All vehicles will be equipped with a unique identification number. o Number and specific details to be provided by the end user site - typically the purchase order number. Multiple vehicles on the same P.O. number will have a letter suffix added o Numbers to be black 7.5 cm (3 ) high. Font to be Myriad Pro Bold o Numbers to be located on left front fender and right rear quarter panel areas and place with a minimum of 2 cm (1 ) clear space on all sides Reflective tape requirements Reflective tape stripes in two colours will be applied on all sides of the vehicles where and how specified by machine type and application o Reflective tape to be automotive grade retro-reflective type o Standard 5 cm (2 ) wide red and silver alternating colour conspicuity tape is acceptable

7 7/11 o Positioning 5-10 cm (2 - inches) below windows unless otherwise required by NHTSA standards Load Capacity, Securement and Signage All vehicles, whether used on or off road, will be engineered for their rated load carrying capacity and will be designed so as to comply with all current Federal, Provincial and Territorial requirements for the intended area of use. Those requirements will include but not be limited to systems to properly secure any load. Vehicle will include signage indicating maximum permitted capacity when applicable 6.0 VEHICLE SPECIFIC REQUIREMENTS (ADDITIONAL) 6.1 VEHICLES IN MINING AREAS Two-way communications radio for mobile machinery in mining areas o Radio systems to meet all regulatory authority and site specific requirements including but not limited to frequency and power levels Four wheel drive (minimum) for trucks with three or more axles Device(s) displaying information on truck position, load, and vehicle speed 6.2 ADDITIONAL FEATURES Speed-recording system (to be specified) Device to prevent unwarranted activation of dump mechanism (where applicable) Device to indicate angle of dump box (where applicable) Grounding devices when inflammable and / or explosive substances are loaded and unloaded 6.3 VEHICLE MOUNTED ARTICULATED CRANES Cargo table in the command cabin / control location in the language of the country and measurement units using the system adopted in the country where the equipment will be used Hook with safety lock Hydraulic controls of a mechanical boom must be operated next to the respective vehicle in order to enable the operator to have a direct view of the entire trajectory of the cargo movement. 6. VEHICLE MOUNTED TIRE HANDLERS Cabin to be equipped with safety instruments to protect against accidental activation Cargo table in the command cabin in the language of the country and measurement units using the system adopted in the country where the equipment will be used

8 8/11 Totally protected motor rotating parts Operator compartment will be an enclosed environmental control design equipped with air conditioning and heating systems as appropriate for the area of operation. Operator cabin to meet all ergonomic requirements in terms of work space, view, noise, and instrument configuration. Reflective stickers two colours on sides of the vehicle as required by NHTSA Standards if applicable. Otherwise follow section above. Gyroscopic warning light Sensor that detects operators absence from machinery s seat Inclination limiting mechanism Adjustable speed limiting mechanism 6.5 EXPLOSIVES TRANSPORT Protection required to prevent metallic parts from coming in contact with explosives and accessories Grounding devices when explosive substances are loaded and unloaded Red flags attached to the sides and rear Safety signage indicating the presence of explosive material Sign lettering visible at a distance stating CAUTION! DANGEROUS CARGO! Gyroscopic light 6.6 MOBILE TRUCK CRANES Fire extinguishers adjacent to carrier operator area and adjacent to crane operator area Auxiliary lights for night-time operation Operations cabin seat to be adjustable for position and height o Seat to have cushioning and suspension systems designed to reduce vibration. o The seat must include head rests. o The cabin must be equipped with safety instruments to protect against accidental activation; Cargo table in the command cabin in the language of the country and using the system of measurement units adopted in the country where the equipment will be used; Totally protected motor rotating parts Reflective stickers two colours on sides of the vehicle as required by NHTSA Standards if applicable. Otherwise follow Vale section above. Gyroscopic warning light Inclinometer (slope / tilt measurement tool) Hook with safety lock Micro switch and alarm switch to indicate boom s safe range in operational conditions Overload sensor

9 9/ DUMP BODY Dump body size not to exceed GVWR capacity of truck Top hinge tailgate to have automatic lock for closure / locking latch to be accessible on operator side. Side hinge tailgate to latch(es) in open position when dumping / travel Dump body to have spill-board to protect rear of cab Rating of Dump Body lift system and cylinders to meet GVWR capacity of truck Dump body locking system to be provided to lock dump box in upright position. Pin style system is the preferred choice Low dump body physical indicator to be provided. Heavy Duty tarp cover with automatic deployment to be provided Dump body shall have wear resistance internal shell as specified by end user. 6.8 FLAT BED Flatbed size not to exceed GVWR capacity of truck as specified by end user Flatbed to have engineered headache board to protect rear of cab, and shall provide a screened window for rear view access. Load binding system to be provided. Strapping ratchet style permanently mounted to bed preferred Bed shall have engineered access system following SAE J185 Bed shall have non skid surface. Bed surface material shall be confirmed by end user. For example, wood, metal, etc. Rear metal bumper shall be provided for loading docks Engineered load barrier / containment around perimeter of bed to be provided as per end user s specifications. 7.0 APPENDICES endix A: Revision and Transition Notes endix B: Keywords endix C: Preferred Product Options

10 10/11 endix A: Revision and Transition Notes (Revisions are listed in reverse chronological order with most recent revision at the top. Revision notes describe: what was changed, why it was changed, and the plan to implement the change, including whether changes are retroactive) Revision First time posted on Engineering Standards Page Section included specifications on Dump Body Section 6.8 included specifications on Flat Bed Section 3.0 included updated INS-001G - Instructions on Requirements for Critical Activities Rev.: 03-27/12/2013 Revision 3 Section included Vale Branding Standard Reference Section Additional details for vehicle identification numbers Revision 2 Section included reference standards SPEC # Revision 1 Section revised requirements to include public road and mine / industrial site use vehicles. Section included requirement for ABS where available Section reverse gear (backup) light moved from various locations Section Reference to windows for forestry / vegetation control applications deleted N/A. Section pt seatbelt / headrest moved from various locations Section removed as not applicable to heavy vehicles Section revised internal rear view mirror requirement Section revised to red and white conspicuity tape Section delete air suspension seat Revision 0 Initial Document Release

11 11/11 endix B: Keywords Mobile Equipment Heavy Vehicles Surface endix C: Preferred Product Options Preferred Product Options lication Product Model Local Vendor

REVISIONS. App Sud. App PC. App Thom DD 2015/07/13 DD 2015/12/23

REVISIONS. App Sud. App PC. App Thom DD 2015/07/13 DD 2015/12/23 WHEEL CHOCKS FOR 1/5 REVISIONS Rev Description Rev n by Sud PC Thom VB LH Clyd Act Issue Date YYYY/MM/DD 1 New Specification BTP 015/07/13 Removed Wheel Chock Data and Table See endix A BTP 015/11/4 DD

More information

REVISIONS. App Thom. App Sud. App PC DD 2015/06/24

REVISIONS. App Thom. App Sud. App PC DD 2015/06/24 /7 REVISIONS Rev Description Rev n by Sud PC Thom VB LH Clyd r Act Issue Date YYYY/MM/DD First Issue DD 205/06/24 DD 205/06/24 Pending Pending Pending Pending Pending Pending 205/06/24 Sud = Sudbury, Ontario,

More information

REVISIONS App PC. App Sud. App Thom TC 2014/03/25

REVISIONS App PC. App Sud. App Thom TC 2014/03/25 /9 Rev Description Document format and number changed. Previous number 543-0.0.30 Rev n by TC 204/03/25 Sud TC 204/03/25 REVISIONS PC Thom VB LH Clyd r Act Issue Date YYYY/MM/DD Pending Pending Pending

More information

REVISIONS. App Thom. App Sud. App PC T.C. 2013/10/01

REVISIONS. App Thom. App Sud. App PC T.C. 2013/10/01 REQUIREMENTS / REVISIONS Rev Description Rev n by Sud PC Thom VB LH Clyd Act Issue Date YYYY/MM/DD Standard Created T.C. 203/0/0 T.C. 203/0/0 Pending Pending Pending Pending Pending Pending 203/0/0 Sud

More information

GALLATIN PUBLIC UTILITIES

GALLATIN PUBLIC UTILITIES GALLATIN PUBLIC UTILITIES Bid Proposal Item: Single Axle Dump Truck Bid Date: Company Address: Phone Number: Manufacturer: Bid Information (1) Prices F.O.B., 249 Hancock Street, Gallatin, Tennessee 37066.

More information

REQUEST FOR QUOTE. Half Ton Trucks CONTRACT NO ADDENDUM NO.2

REQUEST FOR QUOTE. Half Ton Trucks CONTRACT NO ADDENDUM NO.2 REQUEST FOR QUOTE Half Ton Trucks CONTRACT NO. 19-130080-01 ADDENDUM NO.2 ISSUE DATE: March 15, 2019 1.0 GENERAL This addendum forms part of the contract documents and is to be read, interpreted and coordinated

More information

Ontario ENGINEERING STANDARD SPECIFICATION 1.0 PURPOSE 2.0 OVERHEAD CRANES

Ontario ENGINEERING STANDARD SPECIFICATION 1.0 PURPOSE 2.0 OVERHEAD CRANES 1/5 1.0 PURPOSE This specification describes the minimum requirements for all activities involving hoisting, moving or transporting cargo using equipment such as mobile cranes, hoisting equipment in underground

More information

ESSENTIAL SAFETY RESOURCES

ESSENTIAL SAFETY RESOURCES ESSENTIAL SAFETY RESOURCES GS-3009 DRIVING SAFETY Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval: Operations Manager s Signature: Type Name Table

More information

Request for New Heavy Duty 3/4 ton Pickup Truck for Lee County Emergency Management

Request for New Heavy Duty 3/4 ton Pickup Truck for Lee County Emergency Management General: The attached specification is to aid in the purchase of an efficient and dependable 4-wheel drive pickup truck for the Office of Lee County Emergency Management. Bids must be submitted to Lee

More information

APPENDIX A TECHNCIAL SPECIFICATIONS

APPENDIX A TECHNCIAL SPECIFICATIONS 1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of four (4) five ton 6X4, 14 to 16 cubic yard dump trucks, all new current model

More information

This list applies to buses (other than motor coaches), minibuses and any trailer towed by a bus, minibus or motor coach.

This list applies to buses (other than motor coaches), minibuses and any trailer towed by a bus, minibus or motor coach. List 2 Bus This list applies to buses (other than motor coaches), minibuses and any trailer towed by a bus, minibus or motor coach. 1. Coupling devices The defects provided for in points 1.C and 1.F apply

More information

Mantis Rerailer. General Specifications

Mantis Rerailer. General Specifications General Specifications 1. Typical Operating Parameters 2. General 1.1 Operating temperatures will typically be between -4 F (-20 C) to 122 F (50 C). 1.2 Relative humidity ranges between 20% and 100%. 1.3

More information

ADDENDUM 3 - APPENDIX A - TECHNICAL SPECIFICATIONS ONE (1) 3 TON 4X2 CARGO REEL CAB/CHASSIS

ADDENDUM 3 - APPENDIX A - TECHNICAL SPECIFICATIONS ONE (1) 3 TON 4X2 CARGO REEL CAB/CHASSIS 1. SCOPE It is the intent of the JEA to purchase ONE (1) 3T 4X2 CARGO REEL REGULAR CAB/CHASSIS (Chassis Only). Truck Chassis must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville,

More information

PART A TENDER SUBMISSION

PART A TENDER SUBMISSION PART A TENDER SUBMISSION Page 1 of 24 FORM A: TENDER (SEE B7) 1. Project Title SUPPLY AND DELIVERY OF REGULAR CAB CHASSIS TRUCKS 2. Bidder Name of Bidder Street City Province Postal Code (Mailing address

More information

3. CHASSIS (FORD TRANSIT 350HD / DIESEL / HIGH TOP / EXTENDED LWB / 4X4 / DUAL REAR WHEEL VAN)

3. CHASSIS (FORD TRANSIT 350HD / DIESEL / HIGH TOP / EXTENDED LWB / 4X4 / DUAL REAR WHEEL VAN) 1. SCOPE It is the intent of the JEA to purchase (2) Two one (1) Ton Heavy Duty / Diesel / High Top / Extended LWB / Quigley 4X4 Conversion / Dual Rear Wheel Transit Vans with various up-fits and options.

More information

SANDVIK TH320 UNDERGROUND TRUCK

SANDVIK TH320 UNDERGROUND TRUCK SANDVIK TH320 UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH320 is a narrow 20 metric tonne hauler that fits in a 3 x 3 meter heading. Available with a standard forward facing, open operators

More information

Mile 3-1/2, Northern Highway, Belize City, Belize. Telephone: , Fax:

Mile 3-1/2, Northern Highway, Belize City, Belize. Telephone: , Fax: Mile 3-1/2, Northern Highway, Belize City, Belize Telephone: 224-4222, Fax: 224-4224 Email:sales@caribbeanmotors.com Date: June 11 th 2015 Dear Valued Customer, Specifications: TYPE BRAND LINE CODE DOUBLE

More information

ARTICULATED MOBILE CRANE Annual Report

ARTICULATED MOBILE CRANE Annual Report Div of The Crane Industry Council of Australia ABN 73 002 565 773 PO Box 136 MOUNT WAVERLEY VIC 3149 P: +61 (03) 9501 0078 E: assessments@cranesafe.com.au Accreditation no. 19898 ARTICULATED MOBILE CRANE

More information

Truck Specs. Sabre 9 Off-Highway GCWR: 242,000. CapacityTrucks.com

Truck Specs. Sabre 9 Off-Highway GCWR: 242,000. CapacityTrucks.com Truck Specs Sabre 9 Off-Highway GCWR: 242,000 CapacityTrucks.com Sabre 9 / Off-Highway - Base Model Base Model Sabre 9 / Off-Highway Basic Overview GCWR: 242,000 Basic Overview Axle: 4x2 Basic Overview

More information

ABS Components Air Compressors Air Dryers & Cartridges Air Tanks. Air Disc Brakes Bearings Brake Pads Brake Rotors Brake Shoes & Kits Camshafts & Kits

ABS Components Air Compressors Air Dryers & Cartridges Air Tanks. Air Disc Brakes Bearings Brake Pads Brake Rotors Brake Shoes & Kits Camshafts & Kits Air Brake Systems ABS Components Air Compressors Air Dryers & Cartridges Air Tanks Air Valves Brass Fittings Composite Fittings Coiled Air Hoses Glad Hands Nylon Tubing Rubber Hose Tire Valves Brake &

More information

APPENDIX A TECHNICAL SPECIFICATIONS Purchase of all New 2018 Model Year, Nineteen (19) Half Ton Standard Cab 4x2 Pickup Trucks

APPENDIX A TECHNICAL SPECIFICATIONS Purchase of all New 2018 Model Year, Nineteen (19) Half Ton Standard Cab 4x2 Pickup Trucks 1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of nineteen (19) half ton standard cab 4x2 pickup trucks, all new 2018 model

More information

INVITATION FOR BID BID NO FOR: 2014/15 LIGHT DUTY TRUCKS AND VANS COMMODITY CODE:

INVITATION FOR BID BID NO FOR: 2014/15 LIGHT DUTY TRUCKS AND VANS COMMODITY CODE: Mark A. Cowart Chief Information Officer 2222 M Street Merced, CA 95340 (209) 385-7331 (209) 725-3535 Fax www.co.merced.ca.us Equal Opportunity Employer Issue Date: April 16, 2014 THE COUNTY OF MERCED

More information

New Entrants Safety Education Seminar for Georgia Motor Carriers CHAPTER 5

New Entrants Safety Education Seminar for Georgia Motor Carriers CHAPTER 5 New Entrants Safety Education Seminar for Georgia Motor Carriers CHAPTER 5 Chapter 5 PART 393 PARTS & ACCESSORIES PART 393 PARTS & ACCESSORIES All required lamps must be able to light at all times. All

More information

1. Highway Traffic Act Weight & Dimension Limitations

1. Highway Traffic Act Weight & Dimension Limitations GUIDELINES FOR OVERSIZE/OVERWEIGHT VEHICLES May 2012 1. Highway Traffic Act Weight & Dimension Limitations An oversize/overweight permit is required when the dimensions or weight of a vehicle(s) exceeds

More information

Appendix A - Group 7 SPECIFICATION, JEA CLASS 119+: ONE TON SRW 4X4 PICKUP Extended Cab Unit UPDATED August 10, 2018

Appendix A - Group 7 SPECIFICATION, JEA CLASS 119+: ONE TON SRW 4X4 PICKUP Extended Cab Unit UPDATED August 10, 2018 1. SCOPE It is the intent of the JEA to purchase TWO (2) ONE Ton FORD REGULAR GAS EXTENDED CAB SRW 4X4 Pickup Trucks with Various Configurations, Up-Fits and Options. [ONE LWB 8 and ONE SWB 6 6 ] All Units

More information

JLG UTILITY VEHICLES

JLG UTILITY VEHICLES JLG UTILITY VEHICLES 1 MORE MATERIALS. MORE PEOPLE. ONLY IN YOUR JLG UTV. With a rugged design, heavy-duty drive system and class-leading cargo capacity, JLG utility vehicles outlast the competition and

More information

FLAT BED STAKE BODY TRUCK

FLAT BED STAKE BODY TRUCK Group 1 Contract Attachment 4 Price Sheet: Dump Trucks Please see Attachment D: Instruction and General Information for Instructions, Color Key, and Reference Key. GVWR* Code 2 Base Vehicle Description3

More information

ARTICULATED MOBILE CRANE Annual Report

ARTICULATED MOBILE CRANE Annual Report Div of The Crane Industry Council of Australia ABN 73 002 565 773 PO Box 136 MOUNT WAVERLEY VIC 3149 P: +61 (03) 9501 0078 E: assessments@cranesafe.com.au Accreditation no. 19898 ARTICULATED MOBILE CRANE

More information

Mantis Rerailer General Specifications

Mantis Rerailer General Specifications 2008 General Specifications 1. Typical Operating Parameters 2. General 1.1 Operating temperatures will typically be between 20 F (7 C) to 110 F (43 C). 1.2 Relative humidity ranges between 20% and 100%.

More information

CDL Series Pre-Trip Inspection AT-TC3TS T1-JA01. Pre-Trip Inspection Checklist

CDL Series Pre-Trip Inspection AT-TC3TS T1-JA01. Pre-Trip Inspection Checklist Pre-Trip Inspection Checklist This checklist covers different parts of the vehicle you would check before a trip. Note that some specifications described in the following content may not be the same as

More information

Appendix A Group 3 SPECIFICATION, JEA CLASS 133: Truck / 3T CARGO REEL FLAT BED

Appendix A Group 3 SPECIFICATION, JEA CLASS 133: Truck / 3T CARGO REEL FLAT BED 1. SCOPE It is the intent of the JEA to purchase THREE (3) 3T 4X2 CARGO REEL FLATBED UNITS. All units must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville, Florida 32209)

More information

TOYOTA TUNDRA 3 BODY LIFT INSTALLATION INSTRUCTIONS 2014 KIT# 5643

TOYOTA TUNDRA 3 BODY LIFT INSTALLATION INSTRUCTIONS 2014 KIT# 5643 3651 N Highway 89 Chino Valley, AZ 86323 (928) 636-7080 www.p-a-g.net TOYOTA TUNDRA 3 BODY LIFT INSTALLATION INSTRUCTIONS 2014 KIT# 5643 Installation of a Performance Automotive Group body lift kit will

More information

1. SCOPE 2. MODEL: 3.1 Base Curb Weight: not to exceed 7800 lbs. PAGE 1 OF 6

1. SCOPE 2. MODEL: 3.1 Base Curb Weight: not to exceed 7800 lbs. PAGE 1 OF 6 1. SCOPE It is the intent of the JEA to purchase FOUR (4) 3/4 Ton LWB Pickup / Utility Trucks with various up-fits and options (two (2) Fleet Side Pickup Bodies and two (2) Utility Bodies). All units must

More information

PART A STATEMENT OF PRINCIPLES

PART A STATEMENT OF PRINCIPLES PART A STATEMENT OF PRINCIPLES PART A: Statement of Principles A - 1 NATIONAL SAFETY CODE FOR MOTOR CARRIERS PURPOSE The National Safety Code for Motor Carriers (also referred to as NSC ) is designed

More information

Transporter Cab Range Commercial Vehicles

Transporter Cab Range Commercial Vehicles Cab Range Commercial Vehicles Cab Range Specifications. X = standard O = optional - = not available Cab Range Specification Single Cab 75KW 75kW 103kW 4MOTION 2.0 BiTDI 132kW DSG Engine Cylinders 4 4

More information

City of New Haven. 101 FRONT STREET PO BOX 236 NEW HAVEN, MO Phone * * Fax

City of New Haven. 101 FRONT STREET PO BOX 236 NEW HAVEN, MO Phone *  * Fax City of New Haven 101 FRONT STREET PO BOX 236 NEW HAVEN, MO 63068 Phone 573-237-2349 * www.newhavenmo.org * Fax 573-237-4696 August 20, 2014 Request for Bids, Medium Duty Truck City of New Haven The City

More information

LIFTS: Self-Propelled, Material Handling, etc.

LIFTS: Self-Propelled, Material Handling, etc. SEQ # 647-1217 Price quote for: STATE OF MINNESOTA PRICING PAGE Dec. 2017 (Typed Responses Required) LIFTS: Self-Propelled, Material Handling, etc. December, 2017 Vendor Name: Contact Person: Street Address:

More information

Appendix A Group 4 SPECIFICATION, JEA CLASS 135: 14 CUYD DUMP Truck

Appendix A Group 4 SPECIFICATION, JEA CLASS 135: 14 CUYD DUMP Truck 1. SCOPE It is the intent of the JEA to purchase TWO (2) 5T 6X4 14 to 16 CUYD DUMP TRUCKS with 66,000 LB GVWR. All units must be tested and delivered to JEA Fleet Facility (5717 New Kings Road Jacksonville,

More information

SANDVIK LH514E MASS MINING LOADERS

SANDVIK LH514E MASS MINING LOADERS SANDVIK LH514E MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH514E is a high capacity electric Load-Haul- Dump (LHD) developed specially for underground use. It emits very low noise and no exhaust

More information

ABS Components Air Compressors Air Dryers & Cartridges Air Tanks. Air Disc Brakes Bearings Brake Pads Brake Rotors Brake Shoes & Kits Camshafts & Kits

ABS Components Air Compressors Air Dryers & Cartridges Air Tanks. Air Disc Brakes Bearings Brake Pads Brake Rotors Brake Shoes & Kits Camshafts & Kits Air Brake Systems ABS Components Air Compressors Air Dryers & Cartridges Air Tanks Air Valves Brass Fittings Composite Fittings Coiled Air Hoses Glad Hands Nylon Tubing Rubber Hoses Tire Valves Brake &

More information

Section 11: Vehicle Inspection, Repair and Maintenance

Section 11: Vehicle Inspection, Repair and Maintenance Section 11: Vehicle Inspection, Repair and Maintenance Minnesota Trucking Regulations 79 Section 11 Vehicle Inspection, Repair, and Maintenance 49 CFR Part 396 Vehicle inspection, repair and maintenance

More information

APPENDIX A GROUP 2 SPECIFICATION, JEA CLASS 116: HALF TON 4X2 SWB (6 6 Bed) PICKUP TRUCK Standard Cab Units UPDATED JUNE 12, 2018

APPENDIX A GROUP 2 SPECIFICATION, JEA CLASS 116: HALF TON 4X2 SWB (6 6 Bed) PICKUP TRUCK Standard Cab Units UPDATED JUNE 12, 2018 1. SCOPE It is the intent of the JEA to purchase FIFTEEN (15) HALF-TON 4X2 Standard Cab SWB (6 6 Bed / ALL UNITS) Pickup Trucks with Various Configurations, Up-Fits and Options. [15 Standard Cab]. All

More information

TENDER 2019 OR 2020, ONE AND A HALF TON EXTENDED DOUBLE CAB/CHASSIS, 4X4, DUMP BODY TRUCK

TENDER 2019 OR 2020, ONE AND A HALF TON EXTENDED DOUBLE CAB/CHASSIS, 4X4, DUMP BODY TRUCK Municipality of the County of Colchester Recreation Department 1 Church Street, Truro, NS B2N 3Z5 Telephone: (902) 897-3185 TENDER 2019 OR 2020, ONE AND A HALF TON EXTENDED DOUBLE CAB/CHASSIS, 4X4, DUMP

More information

Appendices. Appendix 2 Lists of Defects. List 1 Heavy vehicle

Appendices. Appendix 2 Lists of Defects. List 1 Heavy vehicle 146 Appendix 2 Lists of Defects List 1 Heavy vehicle This list applies to heavy vehicles other than a bus, minibus or motor coach. Any trailer towed by a bus, minibus or motor coach must be inspected in

More information

REQUEST FOR BID For Trucks. Bid Notice

REQUEST FOR BID For Trucks. Bid Notice REQUEST FOR BID For Trucks Bid Notice Bell County Water Control & Improvement District No. 1 (District) is soliciting a Request for Bid for two (2) trucks to be used in its water operations. Sealed Bids

More information

Commercial Vehicle Trip Inspection Schedule Heavy Passenger Vehicles and Trailers

Commercial Vehicle Trip Inspection Schedule Heavy Passenger Vehicles and Trailers Accessibility devices Air brake system Cargo ment Coupling devices Alarm does not operate Equipment does not operate Interlock system does not operate Audible air leak Slow air pressure build-up rate Cargo

More information

2017 Toyota Sequoia dr 4x4 SR5 w/ffv (A6)

2017 Toyota Sequoia dr 4x4 SR5 w/ffv (A6) Toll Free: (800) 742-3928 Fax: (812) 474-4359 7940 4dr 4x4 SR5 w/ffv (A6) Photo may not represent exact vehicle or selected equipment. 7940 4dr 4x4 SR5 w/ffv (A6) SELECTED MODEL Code Description 7940 4dr

More information

VEHICLE SPECIFICATIONS 12 PASSENGER OFF CENTER AISLE VAN REV 02/19

VEHICLE SPECIFICATIONS 12 PASSENGER OFF CENTER AISLE VAN REV 02/19 NOTE: Accepting options to purchase 12 Passenger Off Center Aisle Vehicle with seating arrangements for 12 Ambulatory Passengers. DESCRIPTION: These specifications describe a new 12 Passenger Off Center

More information

2018 FORD F-250 XL 4X2 PICK UP Contract# 142

2018 FORD F-250 XL 4X2 PICK UP Contract# 142 2018 FORD F-250 XL 4X2 PICK UP Contract# 142 Currie Motors Fleet Nice People To Do Business With Your Full-Line Municipal Dealer www.curriefleet.com Currie Motors Frankfort SPC Contract Winner 2018 FORD

More information

THE MUNICIPALITY OF WEST ELGIN. QUOTE FOR THE SUPPLY OF ONE - 1/2 Ton Pickup Truck INSTRUCTIONS TO BIDDERS

THE MUNICIPALITY OF WEST ELGIN. QUOTE FOR THE SUPPLY OF ONE - 1/2 Ton Pickup Truck INSTRUCTIONS TO BIDDERS THE MUNICIPALITY OF WEST ELGIN QUOTE FOR THE SUPPLY OF ONE - 1/2 Ton Pickup Truck INSTRUCTIONS TO BIDDERS 1. GENERAL: This Quote is for the supply of ONE (1) NEW 2018 Pickup Truck. As follows: 1-1/2 Ton

More information

145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR

145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR Page 1 Mountrail County Road and Bridge S FOR Bidder's Instructions: Indicate compliance to the specifications on the YES/NO line by each specification. Indicate any deviations from the specifications

More information

SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs

SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs Page 1 of 5 SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs Insulated Telescopic Articulating type aerial lift with the following

More information

SANDVIK TH540 UNDERGROUND TRUCK

SANDVIK TH540 UNDERGROUND TRUCK SANDVIK TH540 UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH540 is a high performance 40 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health

More information

Fuels Safety Division. Propane Code Adoption Document Amendment

Fuels Safety Division. Propane Code Adoption Document Amendment Fuels Safety Division Ref. No.: Rev. No.: FS-201-12 1 Propane Code Adoption Document Amendment Date: December 1, 2012 Date: IN THE MATTER OF: THE TECHNICAL STANDARDS AND SAFETY ACT, 2000, S.O. 2000, c.

More information

APPENDIX A TECHNICAL SPECIFICATIONS Purchase of all New 2018 Model Year, Two (2) Vacuum Jet Trucks UPDATED November 20, 2017

APPENDIX A TECHNICAL SPECIFICATIONS Purchase of all New 2018 Model Year, Two (2) Vacuum Jet Trucks UPDATED November 20, 2017 1. SCOPE The purpose of this Invitation to Negotiate (the "ITN") is to solicit pricing and select a vendor for the purchase of two (2) vacuum jet trucks, all new 2018 model year. All new 2018 model year,

More information

Federal Motor Vehicle Safety Standards

Federal Motor Vehicle Safety Standards Federal Motor Vehicle Safety Standards Altogether the U.S. Federal government has created 60 federal motor vehicle safety standards. Of these 37 apply to school buses. Of the 37, several were written specifically

More information

Equipment Listing 3C6TR5DT6GG STANDARD EQUIPMENT. Monotone Paint. 180 Amp Alternator. 730 Amp Maintenance Free Battery

Equipment Listing 3C6TR5DT6GG STANDARD EQUIPMENT. Monotone Paint. 180 Amp Alternator. 730 Amp Maintenance Free Battery Equipment Listing VIN Vehicle Description 3C6TR5DT6GG218767 2016 RAM 2500 SLT 4X4 STANDARD EQUIPMENT Monotone Paint 180 Amp Alternator 730 Amp Maintenance Free Battery Electronic Stability Control Anti-Lock

More information

Appendix A - Group 8 SPECIFICATION, JEA CLASS 122+: ONE TON SRW 4X4 8 UTILITY BODY Extended Cab Unit UPDATED August 10, 2018

Appendix A - Group 8 SPECIFICATION, JEA CLASS 122+: ONE TON SRW 4X4 8 UTILITY BODY Extended Cab Unit UPDATED August 10, 2018 1. SCOPE It is the intent of the JEA to purchase EIGHT (8) ONE Ton FORD F-350 Extended Cab SRW 4X4 with BRAND FX 56LS 8 COMPOSITE UTILITY BODYs with Various Configurations, Up-Fits and Options. All units

More information

VEHICLE REPORT Dodge Ram 1500 SELECTED MODEL. Description SELECTED VEHICLE COLORS SELECTED OPTIONS. Interior: No color has been selected.

VEHICLE REPORT Dodge Ram 1500 SELECTED MODEL. Description SELECTED VEHICLE COLORS SELECTED OPTIONS. Interior: No color has been selected. SELECTED MODEL DS6L41 2009 Dodge Ram 1500 4WD Quad Cab 140.5" ST SELECTED VEHICLE COLORS - - - Interior: No color has been selected. Exterior 1: No color has been selected. Exterior 2: No color has been

More information

REQUEST FOR QUOTATION

REQUEST FOR QUOTATION REQUEST FOR QUOTATION Sealed quotations will be received by the CAO/Clerk until: Wednesday, July 6, 2016-11:00 am QUOTATION FOR: PICK-UP TRUCK All items must be submitted on Quotation Forms, in sealed

More information

SPECIFICATION, JEA CLASS 133+ UP-FITS, DESIGN/BUILD: FLATBED/CAB GUARDS, REEL ATTACHMENTS, FABRICATION / ASSEMBLY ETC. UPDATED July 05, 2018

SPECIFICATION, JEA CLASS 133+ UP-FITS, DESIGN/BUILD: FLATBED/CAB GUARDS, REEL ATTACHMENTS, FABRICATION / ASSEMBLY ETC. UPDATED July 05, 2018 1. SCOPE It is the intent of the JEA to award a contract to DESIGN/BUILD/INSTALL Flatbeds with Cab Guards, Three Independently Removable Reel Stands with Complete Tow Package/Off-Road Hitch Assembly s

More information

Caddy Trendline and Alltrack. Commercial Vehicles

Caddy Trendline and Alltrack. Commercial Vehicles Caddy Trendline and Alltrack Commercial Vehicles Caddy Trendline and Alltrack. X = standard O = optional - = not available Caddy Trendline and Alltrack Specification Caddy Trendline Engine Cylinders 4

More information

O5 GENERAL VEHICLE ISSUES

O5 GENERAL VEHICLE ISSUES O5 GENERAL VEHICLE ISSUES O5.1 GENERAL O5.1.1 Production vehicles are rarely suited to site work in their standard form, so before purchasing a vehicle, consideration should be given to the model s suitability

More information

Caddy Panel Van. Commercial Vehicles

Caddy Panel Van. Commercial Vehicles Commercial Vehicles X = standard O = optional - = not available Specification 1.6i 81kW Engine Cylinders 4 4 Capacity (cm 3 ) 1598 1968 Output (kw @ r/min) 81 @ 5800 81 @ 4200 Torque (Nm @ r/min) 155

More information

Sandvik TH663 Technical Specification

Sandvik TH663 Technical Specification Spec. number TH663-04 Technical Specification APPLICATIONS The is a high productivity 63 tonne articulated underground dump truck for use in 6 x 6 meter haulage ways. Operator safety, health and comfort

More information

WA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm.

WA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm. WA100M-8 EU Stage IV Engine WHEEL LOADER ENGINE POWER 69,8 kw / 93,6 HP @ 2.000 rpm OPERATING WEIGHT 6.925-7.230 kg BUCKET CAPACITY 1,05-1,8 m³ 2 Walk-Around ENHANCED FUEL EFFICIENCY AND ENVIRONMENTAL

More information

TRIP Equipment Requirements

TRIP Equipment Requirements TRIP Requirements Recovery Wrecker Specifications All eligible COMPANIES must have either one 50-Ton Recovery Truck OR one 40-Ton Rotator AND One 30-Ton Heavy Duty Wrecker. The qualifications listed below

More information

Certificate of Appointment

Certificate of Appointment Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives

More information

Standard features. Standard features of the Unimog U500 NA 2005 model

Standard features. Standard features of the Unimog U500 NA 2005 model of the Unimog U500 NA 2005 model Engine: - MB 906 diesel engine; 260 hp at 2,200 rpm, torque 700 ft-lbs, max. rpm: 2,500 - Mercedes-Benz 6-cylinder diesel engine water cooled, turbo charger and intercooler

More information

Voyager MDR-235 Four Track Articulated Carrier Specifications

Voyager MDR-235 Four Track Articulated Carrier Specifications DIMENSIONS FOR COMBINED VEHICLE (2 SECTIONS) Overall Length 385" (9.78 m) Overall Width 99" (2.51 m) without mirrors Overall Height 109" (2.77 m) Ground Clearance 18" (45.7 cm) Curb Weight Payload GVWR

More information

2017 Toyota Sequoia dr 4x4 Limited (A6)

2017 Toyota Sequoia dr 4x4 Limited (A6) Toll Free: (800) 742-3928 Fax: (812) 474-4359 7929 4dr 4x4 Limited (A6) Photo may not represent exact vehicle or selected equipment. 7929 4dr 4x4 Limited (A6) SELECTED MODEL Code Description 7929 4dr 4x4

More information

2016 Kia Sportage LX Sport Utility $17,095. Savings $16,250. Fuel Efficiency Rating

2016 Kia Sportage LX Sport Utility $17,095. Savings $16,250. Fuel Efficiency Rating 2016 Kia Sportage LX Sport Utility $17,095 WAS $845 Savings $16,250 NOW Fuel Efficiency Rating City MPG 19 Highway MPG 26 Actual rating will vary with options, driving conditions, habits and vehicle condition.

More information

Sandvik TH551 Technical Specification

Sandvik TH551 Technical Specification Spec. number TH551-05 2014-08-14 Technical Specification APPLICATIONS The is a high performance 51 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health

More information

SANDVIK LH202 NARROW VEIN LOADER

SANDVIK LH202 NARROW VEIN LOADER SANDVIK LH202 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Sandvik LH202

More information

Caddy Crew Bus. Commercial Vehicles

Caddy Crew Bus. Commercial Vehicles Commercial Vehicles Specifications. Specification SWB Engine Cylinders 4 4 4 Capacity (cm 3 ) 1598 1598 1968 utput (kw @ r/min) 81 @ 5800 81 @ 5800 81 @ 4200 Torque (Nm @ r/min) 155 @ 3800-4000 155 @

More information

CHEVY AVALANCHE 1/2-TON ONLY 3 BODY LIFT KIT INSTALLATION INSTRUCTIONS KIT# 10173

CHEVY AVALANCHE 1/2-TON ONLY 3 BODY LIFT KIT INSTALLATION INSTRUCTIONS KIT# 10173 3651 N Highway 89 Chino Valley, AZ 86323 (928) 636-7080 www.p-a-g.net CHEVY AVALANCHE 1/2-TON ONLY 3 BODY LIFT KIT INSTALLATION INSTRUCTIONS 2003-2005 KIT# 10173 Installation of a Performance Automotive

More information

SANDVIK LH208L LOW PROFILE LOADER

SANDVIK LH208L LOW PROFILE LOADER SANDVIK LH208L LOW PROFILE LOADER TECHNICAL SPECIFICATION Sandvik LH208L is a 7.7 tonnes capacity underground low-profile LHD designed to work in low profile room and pillar mining and extra low profile

More information

Commercial Vehicle Trip Inspection Schedule Trucks, Truck Tractors and Trailers

Commercial Vehicle Trip Inspection Schedule Trucks, Truck Tractors and Trailers Air brake system Cab Cargo securement Coupling devices Audible air leak Slow air pressure build-up rate Driver's or passenger's door does not open Cargo is covered but the cover is not attached, or does

More information

9,000 lb. Forklift w/tire Changing Attachment (Propane) Req. 18-GA Georgia Ports Authority. Section 3 - Performance Specs Page 1 of 7

9,000 lb. Forklift w/tire Changing Attachment (Propane) Req. 18-GA Georgia Ports Authority. Section 3 - Performance Specs Page 1 of 7 In this Request For Sealed Bid, the "Required" column means that the bidder must comply with the specifications as indicated, or will be considered non-responsive. The specifications in the "Desired" column

More information

Certificate of Appointment. Eurofins Product Service GmbH

Certificate of Appointment. Eurofins Product Service GmbH Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives

More information

Zip's Truck Equipment. 316 W. Milwaukee Street New Hampton, Iowa Phone: Fax: Visual Inspection.

Zip's Truck Equipment. 316 W. Milwaukee Street New Hampton, Iowa Phone: Fax: Visual Inspection. Zip's Truck Equipment 316 W. Milwaukee Street New Hampton, Iowa 50659 Phone: 641-394-3166 Fax: 641-394-4044 Visual Inspection Page: 1 of 6 Customer: Address: Division: Phone: null Reference #: 2NPRLZ9X37M730087

More information

2018 Ford Expedition

2018 Ford Expedition Toll Free: (800) 742-3928 Fax: (812) 474-4359 U1J 4dr 4x4 XLT Photo may not represent exact vehicle or selected equipment. U1J 4dr 4x4 XLT SELECTED MODEL Code Description U1J 4dr 4x4 XLT SELECTED VEHICLE

More information

IC-35-D. Engineering Spec. Page 1 of 8 Date: June 2006

IC-35-D. Engineering Spec. Page 1 of 8 Date: June 2006 Engineering Spec IC-35-D Page 1 of 8 Replaces: Form HD14D Dated: May 24 BMC s IC-35-2D is a Self-Propelled Industrial Crane designed for in-plant lifting and material handling applications. It has special

More information

LET THE EXPERTS AT V&H EXCEED YOUR EXPECTATIONS.

LET THE EXPERTS AT V&H EXCEED YOUR EXPECTATIONS. RENTAL CATALOG LET THE EXPERTS AT VH EXCEED YOUR EXPECTATIONS. Since 1966, VH Inc. has excelled as a full service company. We serve local, regional and national customers. Our goal is to supply task-specific

More information

Installation, Inspection, Operation & Maintenance Guide

Installation, Inspection, Operation & Maintenance Guide MANUFACTURING CO. THE FIRST NAME IN QUALITY COUPLINGS Installation, Inspection, Operation & Maintenance Guide 238DB, 245DB & 245DB-3 Bolt-On Drawbar Eyes IMPORTANT Read these instructions completely before

More information

HIGH-CAPACITY ADJUSTABLE WHEELBASE

HIGH-CAPACITY ADJUSTABLE WHEELBASE HIGH-CAPACITY ADJUSTABLE WHEELBASE 15000 80000 LBS. SPECIFICATIONS T HDA15/25 T HDA25/35 T HDA40/60 T HDA60/80 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY ADJUSTABLE

More information

Commercial Vehicle Trip Inspection Schedule School Bus

Commercial Vehicle Trip Inspection Schedule School Bus Accessibility devices Air brake system Alternating overhead lamps (if the vehicle is required to be equipped with them by a law of Manitoba or Canada or by school authority policy, or if there is evidence

More information

INVITATION TO BID ONE (1) 10-FOOT DUMPBODY DUMP TRUCK WITH DIESEL / CNG OPTIONS

INVITATION TO BID ONE (1) 10-FOOT DUMPBODY DUMP TRUCK WITH DIESEL / CNG OPTIONS P. O. B o x 1 5 4 0 T h o m a s v i l l e, G A 3 1 7 9 9 2 2 9-227- 7 0 0 0 F A X 2 2 9-227- 3 2 4 3 w w w. t h o m a s v i l l e. o r g INVITATION TO BID ONE (1) 10-FOOT DUMPBODY DUMP TRUCK WITH DIESEL

More information

Incomplete Vehicle Document 2014 Model Year NOTE:

Incomplete Vehicle Document 2014 Model Year NOTE: NOTE: YOU CAN PRODUCE YOUR OWN LEGITIMATE INCOMPLETE VEHICLE DOCUMENT BY PRINTING THIS DOCUMENT AND THEN TAKING A PHOTO OF THE CERT. LABEL ON THE DRIVERS DOOR OPENING. 55351115AZ CHRYSLER GROUP LLC 800

More information

2017 Ford F-550 Chassis

2017 Ford F-550 Chassis Toll Free: (800) 742-3928 Fax: (812) 474-4359 F5H 4x4 SD Regular Cab 169" WB DRW 84" CA L Photo may not represent exact vehicle or selected equipment. F5H 4x4 SD Regular Cab 169" WB DRW 84" CA L SELECTED

More information

Department of Finance Bureau of Purchase & Supplies 375 Executive Blvd., 2 nd Floor Elmsford, N.Y. 10523 (914) 231-1872 www.westchestergov.com TITLE: CONTRACT NUMBER: CONTRACT PERIOD: CONTRACT AWARD NOTIFICATION

More information

BODYSTYLE SAFETY SECURITY COMFORT AND CONVENIENCE IN-CAR ENTERTAINMENT AND COMMUNICATION. Standard length van (L1) Extended length van (L2)

BODYSTYLE SAFETY SECURITY COMFORT AND CONVENIENCE IN-CAR ENTERTAINMENT AND COMMUNICATION. Standard length van (L1) Extended length van (L2) L1 L2 BODYSTYLE Standard length van (L1) Extended length van (L2) SAFETY Driver airbag Passenger airbag ABS with Electronic Brake Force Distribution (EBFD) Emergency Brake Assist (EBA) Electronic Stability

More information

Specifications for New Underground Mobile Mining Equipment Underground Mobile Equipment Major Hazard Standard

Specifications for New Underground Mobile Mining Equipment Underground Mobile Equipment Major Hazard Standard WMC Environment, Health & Safety Management System Specifications for New Underground Mobile Mining Underground Mobile Major Hazard Standard MHS-05 DocsOpen Ref: 57401, 03/03/1999 Uncontrolled copy check

More information

-1- SPECIFICATION M-19-BU-N-ZZ FORKLIFT - TRUCK MOUNTED (ON 24 INCH LOAD CENTER) - 5,500 LB INDEX

-1- SPECIFICATION M-19-BU-N-ZZ FORKLIFT - TRUCK MOUNTED (ON 24 INCH LOAD CENTER) - 5,500 LB INDEX -1-006900 FORKLIFT - TRUCK MOUNTED (ON 24 INCH LOAD CENTER) - 5,500 LB I. GENERAL FORK LIFT S: A. Intent Statement B. Truck Chassis Information C. Capacity D. Forklift Component E. Engine & Drive Train

More information

R1300G II Underground Mining Loader. Name Venue Date

R1300G II Underground Mining Loader. Name Venue Date R1300G II Underground Mining Loader Name Venue Date Machine Specifications Gross Power SAE 136 kw (182 hp) @ 2200 RPM Engine Model CAT C6.6 ACERT Speeds Forward kph mph 1st 5.3 3.2 2nd 10.1 6.2 3rd 18.1

More information

Title 11 DEPARTMENT OF TRANSPORTATION Subtitle 14 MOTOR VEHICLE ADMINISTRATION VEHICLE INSPECTIONS

Title 11 DEPARTMENT OF TRANSPORTATION Subtitle 14 MOTOR VEHICLE ADMINISTRATION VEHICLE INSPECTIONS Title 11 DEPARTMENT OF TRANSPORTATION Subtitle 14 MOTOR VEHICLE ADMINISTRATION VEHICLE INSPECTIONS 11.14.04 Safety Standards for Trucks, Truck Tractors, Commercial Buses, and Type I School Vehicles Authority:

More information

MSV. Innovating for you

MSV. Innovating for you MSV Innovating for you Innovating for you - A new generation of multi-service vehicles CAB SAFETY Operators enclosure is ROPS certified to SAE J 1040C and ISO 3471 at 12,000 lbs. IN CONTROL Sure Grip Controls

More information

COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAME

COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAME RESPONDER'S NAME: Karen Montour SWIFT EVENT NUMBER: G0210-2000004717 Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will provide the required

More information

COLLEGE COMMUNITY SCHOOL DISTRICT BID SHEET. THREE (3) 78 PASSENGER TRANSIT STYLE SCHOOL BUSES and ONE (1) 65 PASSENGER LIFT BUS

COLLEGE COMMUNITY SCHOOL DISTRICT BID SHEET. THREE (3) 78 PASSENGER TRANSIT STYLE SCHOOL BUSES and ONE (1) 65 PASSENGER LIFT BUS COLLEGE COMMUNITY SCHOOL DISTRICT BID SHEET THREE (3) 78 PASSENGER TRANSIT STYLE SCHOOL BUSES and ONE (1) 65 PASSENGER LIFT BUS Bid #1 Three (3) 2010 (78) Passenger Transit Style School Buses and One (1)

More information

2019 FORD F-550 XL 4X2 CHASSIS CAB Contract# 146

2019 FORD F-550 XL 4X2 CHASSIS CAB Contract# 146 2019 FORD F-550 XL 4X2 CHASSIS CAB Contract# 146 Currie Motors Fleet Nice People to Do Business With Your Full-Line Municipal Dealer www.curriefleet.com Good Thru June 1 2018 Production begins June 18

More information