The new dimension. Quotation: BBA recognition Precise, economical and environmentally friendly!

Transcription

1 UF 1

2 Introduction The new dimension Quotation: BBA recognition 2006 Precise, economical and environmentally friendly! Leading through design, innovation and reliability! Field sprayers UF 901 / UF 1201 / UF 1501 / UF1801 Large tank capacities: 900, 1200, 1500 or 1800 litres Extensive range of boom working widths: 12 to 28 metres Light in weight, high in output and very operator friendly. Those using the machines rated the build quality and the paint finish of the machines as very good. The highest rating was also given for service life, the ease of mounting and dismounting from the tractor as well as the manoeuvrability and compactness. Furthermore, the boom width and the unproblematic suspension were also praised. AMAZONE field sprayers fulfil the demands of the crop protection decree, the guide lines of the Biological Federal Institute, BBA and the highest European test standards (ENTAM certification). On request AMAZONE field sprayers are provided with an official certificate of inspection for field sprayers which, depending on the country of issue, is valid up to 2 years. CONTENTS Product family: Introducing a comprehensive family page 4-5 In operation: Mounting and filling page 6-7 Operator station: Clear and operator friendly page 8-9 Control and regulation: Spray computers for all uses page Liquid flow circuit and DUS pressure circulation system: Ingeniously simple DUS page Aircraft style boom design: Superbly strong and superbly light page Nozzles and drag hoses: For crop protection applications and liquid fertilising page The compact self-propelled: UF with front tank The advantages of the front tank Automatic control via Flow-Control Handling and transport page Technical data page

3 Product family Introducing a comprehensive family UF litres UF litres UF litres Functional tank design Narrow tank with favourable centre of gravity Smooth tank walls for easier cleaning inside and outside Minimised residual quantities even on slopes due to the specific design Effective, BBA tested agitation capacity UF litres 4 5

4 In operation Mounting and filling Get setup and start spraying quickly! Everything is functional when in orange and green Fast and safe filling The UF is, in a few simple steps, quickly and safely attached to the tractor with the sufficient space between the tractor and sprayer making the attachment easy. With the parking wheels, the sprayer can be moved easily. The quick coupler system and the Tele-Space PTO shaft available on request - ensure an even faster and simpler attachment to the tractor. All cables and hoses are arranged in a clear, functional manner to avoid any mix ups. The piston diaphragm pumps run perfectly happily when dry and are liquid fertiliser safe. The design of the pumps simultaneously ensures an even, high delivery capacity with a high filling power and quiet operation even under high pressure. Pumps with either 160, 210 and 250 l/min output capacity are available. For a constant, functional supervision of the pump from the tractor seat, the oil reservoir for the pump is placed up on the headstock in full view of the operator. UF 1801 with 24 m Super-S boom (shown with optional braked roller parking wheels) Filling via the suction Option Fill level indicator hose Fill port The sprayer can be filled using the For filling from a pressurised hose, The fill level indicator is readable The 120 litre (901/1201) or 180 litre suction hose via the 2 suction port. a fill port with either a Geka or both externally via a mechanical (1501/1801) fresh water container is The liquid flow is routed in such a Camlock coupling is available as pointer and in the cab electronically situated under the main spray tank. way that during the filling procedure an option. Using this connection, via either the AMATRON + or the Simple, ground-level filling is made there is always clean water available the fresh water can be simulta- AMASPRAY + on-board computers. possible by good positioning on the at the induction bowl. neously filled from the left hand right-hand side as viewed in the direc- side. tion of travel. If desired, the fresh water tank can also be filled via the fill port on the left-hand side. Fresh water rinse tank Induction bowl UF 1201 with 24 m Super-S boom A 2 discharge port for quick emptying under pressure, for example, transferring to a front tank, can also be supplied (option). 6 7

5 Operator station The operator control station Exact mixing of the spray agents Clear and user friendly All controls are arranged in a clear, logical, easy to understand, layout on the front left corner which is directly accessible from the driver s side. The valves are all marked with self-explanatory symbols to avoid operational errors. Compare! Induction bowl Fast and safe The 60 litre induction bowl offers fast and clean working and is very easily accessible from the front left of the central operator control panel. With the Venturi system, a high fill throughput is attained. The same professional induction bowl is used on the UX trailed sprayer! All functions are controlled with only three levers: 1 Pressure Vario-control valve for spraying, inducting, internal or external cleaning. 1 Induction Canister flushing Pressure filter 2 Agitation valve for the infinitely variable setting of the agitation intensity via the self-cleaning pressure filter. Integrated additional function: Specific draining of the pressure filter 2 Powdered ingredients and large amounts of urea are quickly and safely dissolved and simultaneously inducted with a huge capacity. Three additional nozzles ensure a splash-free and effective induction with both intake and suction aggressiveness infinitely adjustable. For unproblematic cleaning of the spray agent canisters and for full utilisation of the contents, the canisters are flushed using the rotary nozzle. With this nozzle, the induction bowl can be cleaned even when the lid is closed. A dead man s control keeps the The self-cleaning pressure filter is standard equipment. The agitator tap also enables the specific draining of the pressure filter. In this way the filter can be checked without any spray agent escaping especially useful when the tank is full. user safe. 3 Suction Vario-control valve for filling, spraying, flushing, rinsing Integrated additional function: Venting of the suction filter for pressure free residue draining. 3 Hydraulic, intensive agitator The intensity of the agitation is infinitely adjustable in order to prevent foaming of the crop protection agent or to minimise residues. Operator station UF 8 9

6 Control Exact dosage and simple operation One terminal for all AMAZONE machinery The AMATRON + on-board computer enables the fully The universal AMATRON + operator terminal is able to When used in conjunction with AMAZONE seed drills, automatic control of the prescribed spray rate (l/ha). control many machines from the AMAZONE product the AMATRON + is responsible for electronic tramline Rate changes are possible in pre-selected %steps. range. On the ZA-M fertiliser spreader, in conjunction control and additionally, changing the seed rates in This modern on-board computer, thanks to its clear, with the Comfort electronic pack, the Limiter border pre-selected steps. When using the trailed Cirrus seed simple and logical operation, is especially user-friendly spreading device and the on/off shutter slides can be drills the comprehensive electro-hydraulic functions, and with its extra-large, low-reflection display it moni- electro-hydraulically controlled. Forward speed related such as seed depth or intensity of the seedbed culti- tors the complete system. The very compact dimen- or site specific spread rate control is also possible. vation are also controlled via the AMATRON +. sions of the computer mean little space is required in the tractor cab. By using two flow meters, the application rate is extremely precisely maintained, especially at low spray rates. AMATRON + Standard functions: - Overall and part-width section on/off - Up to 9 part-width sections - Digital pressure indication - Digital fill level indication - Display of boom position and lock status - Field record management system with 20 memories - Serial interface for documentation and GPS terminal versatility - ISOBUS compatible Special functions: - Foam marker - End or boundary nozzle on/off control - Pre-select fold for independent boom folding - Profi-fold for independent boom folding or boom tip angling (only 1 tractor control valve required) - Distance Control automatic boom guidance - Comfort pack remote controlled filling and cleaning Field sprayers Fertiliser spreaders Seed drills Multi-function joystick Using the multi-function joystick makes operation of the machine even more comfortable. Without visual contact, the most important spraying functions can be controlled via the ergonomically shaped joystick. The AMATRON + is then used only as a monitoring and input device. A small toggle switch allows use of only 8 buttons to three different levels. AMACLICK In order to shut off individual part-width sections in certain applications such as bed systems when cropping vegetables, the corresponding part-width sections can be pre-selected and permanently switched off via the AMATRON +. If this function is required regularly, the use of AMACLICK is recommended. Safe, simple documentation transfer ASD, automatic field related documentation, is a product and manufacturer overlapping documentation concept for the transfer of specific application data between the AMATRON + and AMASPRAY + on-board computers and electronic field record software. The serial interface used is in the public domain and as such, is accessible to other manufacturers. ASD provides the farmer with the possibility of simply and economically integrating all machines into the documentation chain. Future proof technology The serial interface (RS232) that enables use to be made of sensor technology (e.g. Yara N-Sensor) or different GPS terminals is integrated, as standard, into the comprehensive equipment level provided by AMATRON + and AMASPRAY

7 Control AMASPRAY + on-board computer AMASET + control box AMASPRAY + modern and precise The AMAZONE AMASPRAY + on board computer is a robust and self-explanatory spray computer enabling the user to concentrate on driving, whilst the computer carries out the control and forward speed related regulation. AMASET + simple and safe The AMASET + control box is a comfortable solution for user-friendly and environmentally friendly crop protection application. All important spraying functions being controlled remotely from the tractor cab. Within the same tractor gear the spray rate (l/ha) remains constant. Standard functions: - Single line, high-contrast screen - Overall and part-width section on/off - Up to 7 part-width sections - Digital pressure indication - Digital fill level indication - Display of boom position and locking status - Hectare counter (total and daily counter) - +/- 10 % key AMASPRAY + Special functions: - Pre-select fold for the independent boom folding - End or boundary nozzle on/off control (alternatively to pre-select fold) - Fold or tilt via 1 double acting control valve (electric changeover unit) - ASD inside: serial interface for documentation and GPS terminal versatility Standard functions: - Digital pressure indication - Overall and part-width section on/off - Up to 7 part-width sections - Electric in-cab pressure adjustment - Display of boom position and lock status AMASET + Special functions: - Pre-select fold for independent boom folding - End or boundary nozzle on/off control (alternatively to pre-select fold) - Fold or tilt via 1 double acting control valve (electric changeover unit) TG control chest for AMATRON + and AMASPRAY + NG equal pressure chest for AMASET + Equal pressure valve chest The equal pressure valve chest for the AMASET + control box is positioned in the centre of the boom. Ultramodern motor valves allow the fast, drip-less on/ off control. Matching the equal pressure valve chest to the nozzle size is quickly and easily carried out via the colour coordinated dials. Top spraying technology Manually operated valve chest For the AMATRON + and AMASPRAY + spray rate computers the most modern control chest technology is available. The part-width boom sections are switched, on and off, quickly and drip-free via electric motor valves with pressure relief. The manually operated valve chest allows spraying without any electrical power supply. The main switch, the manual pressure adjustment and the switching on and off of either three or five boom part-width sections are arranged in a clever, ergonomic manner. In all situations the spray rate is exactly and quickly controlled directly via the computer and so negating the need for any mechanical equal pressure control. UF 1801 with 24 m Super-S boom Due to the equal pressure system the spray rate per hectare remains constant when switching on and off the part-width sections

8 DUS UF liquid circuit Logical and comfortable The pressure circulation system (DUS) Ingeniously simple this is how DUS works The liquid circuit of the UF series has been optimised for operator friendliness and lowest residual sprayer volumes. AMATRON + execution with DUS, quick emptying and external wash down kit Cleaning with a partly filled tank is possible and also the targeted emptying of the suction and pressure filter prior to opening the filter housing. 1 Vario-control suction side 2 Vario-control pressure side 3 Agitator tap Before commencing work, all the hoses including the spray lines are flooded under pressure with spray agent in the reverse direction. Thus the spray lines are always filled over the entire working width and thus instantly ready for use. No waiting at the headlands for the spray agent to reach the boom ends. Every time an Individual part-width section is switched off, during each turn and during transport, the spray liquid circulates continually. This is done via the AMAZONE pressure controller, which guarantees a reliable circulation. And thus deposits, blockages or any settling inside the spray lines is safely prevented. The concentration of the spray agent always remains constant right up to the nozzles, so starting the spraying operation, for example after a change of ingredients, is carried out without problems. During the cleaning operation clear fresh water flushes through the spray lines down to the nozzles without the necessity to spray. During this cleaning procedure the concentrated spray liquid is returned back to tank via the pressure re-circulation system leaving the spray lines clean. Suction side from the pump pressure relief valve 2 3 Pressure side Return flow Filling venturi Internal cleaning boom part width shut-off valve switched off to the tank The flow of spray agent is routed from the pressure regulator to the pressure relief valve and flows on at low pressure to the throttle valve. The spray agent then flows in the reverse direction back to the tank. Spray line non-return valve 1 External cleaning External cleaning The Comfort pack for the remote control of filling and cleaning The new option with three functions for all UF models with AMATRON + Automatic fill stop for controlling, on and off, the suction tap at the desired fill level. Automatic agitator shut off at a fill level of less than 5% (the nominal volume) results in small residual volumes. Cleaning the spray line, tank and agitator is possible via the AMATRON +. No need for the operator to leave the tractor cab. With the spray lance of the exterior wash down kit the outside of the crop protection sprayer can be thoroughly cleaned after use whilst still in the field. The 20 m hose reel supplies a working pressure of 10 bar to enable effective cleaning with little water consumption. Internal cleaning The standard internal tank cleaning system with rotary nozzle ensures quick and effective washing out. Smooth tank walls without nooks and crannies allow safe function and simple monitoring

9 Booms Aircraft style boom design Compare! Simultaneously superbly strong 3-fold shock absorbed suspension for AMAZONE booms and superbly light most arduous operational conditions an idea gains acceptance AMAZONE booms are designed to be simultaneously As standard all AMAZONE booms are equipped with Compactness matters! Everything shipshape! superbly strong yet superbly light. The nozzle bodies 1. springs and shock absorber pack for damping the Due to the low centre of gravity and the light and ro- The boom locates safely in the transport hooks. No with integrated diaphragm non-return anti-drip valves vertical roll movements, bust design of the machine it is easy to carry and the rattling and banging whilst on the road and no boom fit up into the boom profiles reliably preventing any 2. rubber buffer damping elements with ball suspen- tractor front axle weight reduction is much less than rests susceptible to wear fitted to the tractor. Fast dripping at the nozzle. Self-adjusting bayonet caps sion to damp down the horizontal yaw movements with many competitors. travel A to B is no problem. ensure a quick, tool-less nozzle change. For any ope- 3. tension springs for the shock absorbed suspension rational use and any application rate the right nozzles of the entire boom. Drive safely! Clean working! are available, for example, for the optimum wetting, The visibility in road transport is exemplary. Wherever No spray agent from the booms drips on to the tractor anti-drift or for liquid fertiliser use. As standard also is hydraulic height adjustment and the tractor can pass through, the boom also can go or on the operator station and the booms also do not guide skids that results in the perfect boom guidance through with no protruding parts, no boom damage hit the tractor cab. and thus, the accurate longitudinal and lateral distri- that is all down to the minimal transport dimensions. bution of the spray agent. Boom design to perfection The most important quality features In hilly terrain and with large working widths hydraulic tilt adjustment makes sense. The quick and precise tilting and return of the boom into the neutral position is possible via a tractor control valve or the electrohydraulic function via AMATRON +. Both Q-plus and the Super-S series AMAZONE booms are BBA recognised and comply to the highest European demands on crop protection implements compare that with the others! Maintenance-free The decades of experience in boom design pay off: The conical hinge pin is the intelligent centre of a well thought-out boom philosophy! The boom pivots selfadjust against any play on the conical hinge pins and that ensures for the user an optimised boom function even after many years. UF 1201 with 18 m Super-S boom Long service life Use of stainless steel, the catalytic painting process, with its automobile industry protection standards, as well as the targeted use of plastics and aluminium is the guarantee for high longevity. Exclusively from AMAZONE: All hydraulic connectors are always made from stainless steel! 16 17

10 Q-plus boom Q-plus boom Boom division and folding options Simultaneously superbly strong yet superbly light 12 12,5 15 metres Working widths Weight Nozzle arrangement The hydraulic folding is done via oversized hydraulic rams. Included as standard: Hydraulic height adjust- Q-plus boom with automatic locking and unlocking: The functions of boom folding and 12 m (Transport width 2,56 m) 202 kg ment, 3-fold shock absorbing suspension system and tilt adjustment can also be actuated via the one sided, independent folding on the left hand one tractor control valve with an optional side as viewed in direction of travel. 80 mm wide profiles provide excellent rigidity. electric changeover unit. 12,5 m (Transport width 2,56 m) 202 kg The Q-plus boom can immediately be folded out Also the manual folding out of the Q-plus boom is at half height. Folding in is possible at any desired height. Two control valves are required: - One single acting control valve for height possible. The manual folding is actuated via powerful tensioning and pressure springs without locking catches. 18 m (Transport width 3,70 m) 3 metres 228 kg adjustment The central hose guidance ensures a clean and kink- - One double acting valve for folding in/out free routing of all hoses and cables. - One double acting control valve for hydraulic tilt adjustment (option) Independent fold of the Q-plus boom As standard the Q-plus boom allows the one sided, independent fold on the left hand side viewed in direction of travel. As an option the Q-plus boom can be equipped with pre-select folding for the independent folding left or right hand side. The pre-selection of these hydraulic functions is carried out electrically via AMASET +, AMASPRAY + or AMATRON +. From the boom being folded fully out after pre-selection only this one side is then folded in again. Manually folded Q-plus boom UF 901 with 15 m Q-plus boom Alternatively, on AMASET + and AMASPRAY + the same keys can also be used to control the boundary or end nozzle on/off control

11 Super-S boom Super-S boom Boom division and folding options Superbly narrow transport width of only 2.40m on all Super-S booms metres Working widths Weight Nozzle arrangement The Super-S boom folds fully automatically in and out 15 m 415 kg via hydraulic rams. In the transport position the boom sits compactly behind the tank with a transport width 16 m 423 kg of only 2.40 m and a transport height of 2.90 m with a standard tractor. The multiple-folded steel profiles of up to 140 mm wide make the Super-S boom extremely robust. The 3-fold shock absorbing boom suspension system, the hydraulic height adjustment and the 18 m 20 m 21 m 429 kg 541 kg 544 kg elastic height skids ensure the perfect guidance of the Super-S boom with the right distance above the target 21/15 m 539 kg surface. 24 m 561 kg UF 1801 with 24 m Super-S boom 27 m 610 kg Carin Handriek regarding the Super-S boom: (Agricultural Centre of Hörsteltal, registered association, Mechterstädt) We are pleased with the output of our record-beating sprayer. Even after 110,000 hectares the joints and the entire boom technology are not suffering in any way from fatigue. 28 m Pre-select folding The pre-select folding is possible via the tractor control valves using the AMASET +, the AMASPRAY + and the AMATRON kg Independent fold Profi-fold Profi-fold is the electro-hydraulic actuation of the boom via an oil circuit from which the functions of height adjustment, folding out and in, independent fold, boom width reduction and tilt adjustment (Profi-fold I) are easily actuated via AMATRON + or the joystick. Additional boom tip angling is possible via Profi-fold II. Angling Distance Control With the Super-S boom the fully automatic boom guidance is also possible. Distance-Control allows the automatic height and tilt control in conjunction with Profi-fold I or II. Angle sensor Ultrasound sensor Ultrasound sensor 20 21

12 Nozzles The sprayer specialist advises... End and boundary nozzles...less drift, even at higher wind speeds End nozzles Boundary nozzles With the air assisted Injector nozzles crop protection agents can be applied with very low drift. They are universally usable in all crops and all situations. Because of the coarse droplet size, these nozzles can also be used at greater wind speeds. AMAZONE offers for agricultural applications a wide range of nozzles from Lechler, Agrotop and Teejet. Nozzle protection tubes, standard on the outer sections or on request over the entire boom width, protect the long injector nozzles and multi-nozzle bodies. End nozzle control switches off, independent from the normal boom part-width section valves, two or three nozzles to enable an un-sprayed buffer zone to be left at the boom end. AMASPRAY + and AMATRON + spray computers automatically keep the application rate (l/ha) constant. The boundary nozzle control provides the accurate adherence to the field s border. When actuating the boundary nozzle control the last normal nozzle is switched over to a special boundary nozzle which, via an asymmetrical spray angle nozzle, facilitates a conventional spray pattern in the field but limits the outer spray pattern to within the normal working width thus preventing potential over-spray outside the confines of the field. Single and multi-nozzle bodies Application in the field Boundary nozzle Application in the field The nozzle bodies, safely located in the boom profile fra- 1 metre Field s edge mes, have integrated diaphragm non return valves to prevent dripping of the nozzles. Self-adjusting bayonet fixings ensure a tool-less quick nozzle change. The triple or quad nozzle bodies are better suited for frequent nozzle changes or varying End nozzles Application on the field edge Application on the field edge applications and crops. Liquid Liquid fertilising Safe and user friendly Air Nozzle bodies Air For the coarse droplets distribution of liquid fertiliser AMAZONE offers multi-hole nozzles (3, 5, or 7 hole) or the FD slit nozzles. Injector insert In conjunction with the Super-S boom a separate drag hose unit is available. The self-contained aluminium profiles can be attached with a few hand clamps. Drag hoses offer a risk-free late top dressing with liquid fertiliser and stainless steel weights help keep the position of the drag hoses within the crop

13 Front tank The compact self-propelled: UF with front tank The advantages of the front tank Advantages over trailed sprayers Advantages as against self-propelled Compact unit Less side crabbing on side slopes Optimum ballasting of the front axle results in a smooth travelling behaviour in sloping terrain. Faster to back into corners on the headland Huge advantage on price Up to 50 km/h permitted speed on the road 80 km/h permitted speed with fast tractors Tractor can also be used for other operations Easy manoeuvre in smaller and in wedge shaped fields Compact transport on narrow country lanes and along roads The front tank simultaneously serves as front weight ensuring an optimum balance Reduction of soil compaction Price advantage The front tank acts both as an extension of the tank volume and also as a front weight. The special advantages offered of more manoeuvrable tractors with a mounted implement compared with trailed sprayers in smaller and more awkward shaped fields as well as the better behaviour on slopes are the major arguments for the front tank solution. However, even in the 3, 000 litre self-propelled class a comfortable tractor in combination with a high-class mounted sprayer and front tank is an interesting alternative. Quote Top Agrar 10/2008: Due to the intelligent control of the liquid flow AMAZONE managed to make the front tank really practical Examples for use: ha arable farming or mixed livestock farm: HP as a husbandry tractor with UF 901/1201 and FT ,900l / 2,200l total tank volume ha arable farm or contractor: HP as main tractor with UF 1501/1801 and FT ,500l / 2,800l total tank volume Vegetable growers: High manoeuvrability and maximum volume transport 24 25

14 FT control/handling Automatic control via Flow-Control Handling and Transport The specific feature of the FT 1001 is the 100% integration of the front tank into the mounted sprayer via the Flow-Control electronic fill level management system in the proven AMATRON +. The technological basis of Flow-Control is the two electronic fill level indicators in the tanks and the two high capacity injectors. The transfer capacity in both directions is up to 200 l/min ensuring the liquid is always ideally homogenised. No matter whether in the yard or in the barn: there is always a safe parking place for the compact combination on its parking rollers. This simple handling convinces even after just a few operations. The internal cleaning of the sprayer combination is carried out via the fresh water tank of the UF. The 100l additional clean water tank allows for the appropriate cleaning according to the European guide lines (clean water supply at least 10 % of the tank volume) AMATRON + automatically controls the liquid circuit, ensuring always, an optimised weight distribution. Premature relief of the weight on the front axle is prevented and, depending on the fill level, new liquid is delivered from the front tank early enough so that the mounted sprayer is never emptied prior to the front tank and the liquid always remains homogeneous. Manual control also allows the transport of just fresh water in the front tank. The compact sprayer-tractor unit is favourable especially in narrow lanes with hardly any obstruction to the view thanks to the well thought out design. The AMAZONE FT 1001 fulfils all relevant EC guide lines and standards for traffic safety. The optional traffic light kit is necessary in cases where the traffic lights of the tractor is hidden. The covered low beams of the tractor must be repeated on the tractor roof. The fitting on the front tank is not allowed. Automated liquid flow via Flow-Control 1 AMATRON + 2 High capacity injectors 3 Switch valves for injectors 4 Electronic fill level indicators 5 Flow-Control pump 115 l/min 6 Internal cleaning 7 UF spraying pump 8 Spray line 26 27

15 Technical data Technical data UF 901 UF 1201 UF 1501 UF 1801 UF m Q-plus 115 l/min NG 5-fold AMASET + UF m Q-plus 160 l/min TG 5-fold AMASPRAY + UF m Super-S 160 l/min NG 5-fold AMASET + UF m Super-S 210 l/min TG 7-fold AMATRON + UF m Super-S 210 l/min TG 5-fold AMASPRAY + UF m Super-S 250 l/min TG 7-fold AMATRON + UF m Super-S 250 l/min TG 7-fold AMASPRAY + UF m Super-S 250 l/min TG 9-fold AMATRON + Nominal volume (l) Empty weight (kg) Length (m) 1,55 1,55 1,60 1,60 1,85 1,85 1,85 1,85 Height (m) 2,46 2,46 2,90 2,90 2,90 2,90 2,90 2,90 Transport width (m) 2,65 3,00 2,40 2,40 2,40 2,40 2,40 2,40 Height adjustment (m) 0,50-2,10 0,50-2,10 0,50-2,20 0,50-2,20 0,50-2,20 0,50-2,20 0,50-2,20 0,50-2,20 FT 1001 FT 1001, Flow-Control Basic weight (kg) 217 Nominal volume (l) Actual volume (l) Permissible total weight (kg) Illustrations, contents and details about technical data are non-binding! AMAZONE field sprayers generate income! UG Nova field sprayer, litres, 15 to 28 m UX field sprayers, litres, 15 to 40 m SX self-propelled machine, 4000 litres, 24 to 36 m AMAZONEN-WERKE H. DREYER GmbH & Co. KG P. O. Box Hasbergen-Gaste/Germany Phone +49 (0) Fax +49 (0) MI 2223 (GB) Printed in Germany amazone@amazone.de