Model 1101 & Accessories

Transcription

1 The cost effective alternative to expensive motorized units and inefficient scaffolding. Adjustable Wor k Platfor m Model 1101 & Accessories Meets applicable U.S. ANSI and OSHA Standards for rolling work platforms. Made in the U.S.A. Safe Portable All Steel Construction Integrated Components No tools assembly 1 Year Limited Warranty Shown here with Model 1177 Telpro Inc Manufactured by: S o. 4 2 n d S t. G r a n d F o r k s, N D ( ) ( )

2 Innovative The Adjustable Platform Unique winch system allows the platform to telescope up and down to raise and lower the platform heights from 2 to 11 at six inch intervals (*up to 18 working height). For elevations below 6 simply mount the deck on the lower rungs. The telescoping system allows for fast height adjustments just as when working at higher elevations greater than 6. Just crank the manual winch. The spring loaded safety lock pins provide fast, safe, positive platform heights that can be locked in every 6. For higher elevations, the optional Extension Model 1177 is available. Reach platform heights from (*up to 24 working height). Installs in about 10 minutes! *Working height is approximated by adding platform height to a worker s reach. w w w. t e l p r o i n c. c o m

3 Versatile Assembly The Tele-Tower prevents wasted time setting up, adjusting, and tearing down other scaffolding. No more worries about losing parts, Tele-Tower components are integral to the unit. One person can assemble the unit safely from the ground - no tools needed. Transport in a van or pickup truck. Working Space The spacious deck allows two workers to work side by side or allows one person a generous work space. Safe and affordable, two reasons to replace your motorized units to this cost effective solution. Steel Deck: 19 W x 68 L with a safety 4 toe board 72 Full Extension 50 Half Extension 31.5 Retracted Outriggers Versatile outriggers have easy slide-out, lock-in adjustment. The 6 base provides stability at higher elevations. Slide one side in when working next to a permanent wall - slide both sides in when passing through standard 32 doorways.

4 Adjustable Wor k Platfor m 5 Dual locking casters Spring loaded lock pins Adjustable Outriggers Manual Winch System Positive Platform Heights Integral Outriggers Safety chains 4 Toe Safety Rail Heavy-Duty Casters Secure Locking Pins 6 Sturdy Base 4 Safety chains Safety & Quality

5 Reduction Drive Safety Poles Optional Accessories c Storage Cradle Storage Kit Installed 1177 Product support:

6 Model (4.47 m) max total height Model 1101 with Extension (6.43 m) max total height 133 (3.38 m) max platform height 210 (5.33 m) max platform height 47 (1.19 m) Top inside 68 (1.73 m) Inside 72.5 (1.84 m) walk through clearance 150 (3.81 m) max platform height (80.01 cm m) min. to max. base width 76.5 (1.94 m) total outside length 19 (48.26 cm) platform width 79.5 (2.02 m) clearance height with safety rails removed (1.91 m) platform height: fully assembled not elevated 24 (60.26 cm) minimum platform height Complete Model 1101: Complete Model 1177: (2) Telescoping end sections with outriggers on 5 heavy duty dual locking scaffold casters (1) Connecting beam with cable elevating mechanism (6) Interchangeable sway braces (1) Steel safety deck with 4 toe board (1) Set of 4 safety rails with 4 safety chains (2) Complete Extension Ladders (4) Extension Coupler Pipes (4) Braces (1) Deck Specifications & Features Net Weight Static Load Rating Steel Safety Deck Platform Heights Max. Working Height Safety Lock Pins Winch System 6 Base: Height to Base Ratio Ship Box Qty 1 Dimensions Optional Extension LBS. 550 LBS. w/ 4 Toe board 2-11 approx increments from 6-11 Raises Platform Better than 2:1 84 x 34 x LBS. Adds 6.5 to platform height Net Weight Static Load Rating Steel Safety Deck Platform Heights Max. Working Height Safety Lock Pins Winch System 6 Base: Height to Base Ratio Ship Box Qty 1 Dimensions Install Time 98 LBS. 550 LBS. w/ 4 Toe board approx. 24 in 6 increments from Raises Platform Better than 3:1 84 x 34 x LBS. Approximately 10 minutes!

7 1027 Safety Hoist Dual Drive winch hoists up to 75 lbs to the deck effortlessly. Patented overload protection. Unit includes bucket harness. By 1154 Large Tray Use one or both of the tool trays to keep tools at hand and off the deck Small Tray 1025 Drill Drive This is a dual drive that can be used with a drill or by hand to raise and lower the Tele-Tower Ground Drive 8-23 Reduction Drive Is an add-on to the Tele-Tower that makes it easier to raise and lower the Tele-Tower. Model 1177 Extension The 1177 is an extension unit for the 1101 Tele-Tower. It fastens to the top of the Tele- Tower and adds 6.5 feet to the height. With the extension on the 1101 is adjustable from 12.5 feet to 17.5 feet in 6 inch increments. Accessorize your Tele-Tower Safety Rail Storage Cradle Holds all four safety rails securely under your deck. Keeps the rails close at hand when not in use. While on the deck, move the Tele-Tower around the job with this attachment. Works on the 1101 from deck heights of 6 feet to 11 feet. Geared to make it easy to move the 1101 or Storage Kit The Storage Kit is excellent for keeping your Tele-Tower in a nice compact space. Keeps the unit all together in a small, rollable footprint. It will also hold the 1177 Extension. Form Telpro Inc. All rights reserved.

8 The 1630 Tele-Tower Connector will join multiple TeleTower s together at the base and the deck, allowing you to create a long working platform. Caution must be used when adjusting heights of the multiple Tele-Tower s joined by the Connector. Each Tele-Tower must be adjusted individually and the deck connector will need to be repositioned after adjusting. All Tele-Tower s need to be adjusted to the same height when using the Connector. End Chains must be used to connect the two guardrails on either end. Use the Tele-Rail to add guard rails between two Tele-Tower units spanning a bus or other large vehicle for roof top work Safety Pole Use to secure the end chains when working against a wall and not using the guardrails on the wall side. These are sold individually and two are required on a Tele-Tower. Got a custom application or need? We've solved many difficult and unique overhead access needs. Give us a call or us with all of the details and let us see what we can do for you telpromktg@telproinc.com

9 All photos are for illustration purposes only. Always wear proper personal protective equipment. Adjustable Wor k Platfor m Model 1177 Extension Simple, Safe & Cost Effective Add 6.5 to the Tele-Tower Adjustable Work Platform Stand on 17.5 by adding the 1177 Extension to your Tele-Tower Proudly made in the U.S.A 7251 South 42nd St. Grand Forks, ND Call or visit Form Telpro Inc.

10 In about 10 minutes you can add the 1177 Extension on the Tele-Tower Adjustable Work Platform allowing you to stand on platform heights between 12.5 and 17.5 in six inch increments. Simple, Simple, Safe Safe & Cost Cost Effective Effective All photos are for illustration purposes only. Always wear proper personal protective equipment. 1. Insert coupler pipes. 2. Place extension ladders 3. Attach hook. 4. Attach horizontal braces. 5. Position deck. 6. Insert the safey rails. 7. Attach safey chains. Static load rating of the Tele-Tower with the 1177 Extension installed: 550 lbs (249.5 kg) Always adjust base outriggers to maintain height-to-base ratio in accor dance with applicable ANSI/OSHA standar ds. 8. Crank it up.