Standard Features. Available Options ABOVE FRAME SERIES AF SERIES ROLL-OFF CABLE HOISTS. » 60,000 lb. capacity» Tandem axle

Transcription

1 ROLL-O L OSTS Tel: sales@wastequip.com OV RM SRS bove rame () cable hoists are versatile enough to work with any truck chassis, suspensions, exhaust systems and fuel tanks.» 60,000 lb. capacity» Tandem axle -OR model shown SRS Standard eatures vailable Options ase of Operation entered cab-mount Power Tower Plug n Play wiring system Pintle-ready rear aprons Standard inside air control Safety utomatic front container spring-loaded locking system and rear container holddowns eavy-duty safety props old-up bumper ackup alarm and hoist up alarm with signal light on dash Optional hoist up speed-limiting parameters * actory mount models ll albreath products are designed to be compliant with NS standard container requirements. urability 3 micron filtration system with dual viscosity oil Two-part epoxy primer and paint* ield-tested heavy-duty rear hinge oist frames are huck bolted to chassis* Shock-absorbing sub-frame Oil reservoir is filter cart ready L lighting Lifetime warranty on frame and two-year warranty on hydraulics Quality Stringent, multi-year product testing, engineering, solid modeling, and stress analysis testing ensure maximum product quality ustomized engineering layouts are based on customers chassis to ensure compatibility Pintle hook applications Various fender options uxiliary hydraulic hook-ups Scale systems Pioneer Rack n Pinion tarping systems Lift axles dditional hydraulics Special safety lighting with strobes Wet kit Mobile Products ivision

2 R S OUT 12" W N NTR PTRLT ORZONTL XUST ON NOR LOT ON PSS. S WT 1.5" OUTOR PROTRUN NR MOUNTS SPTONS OR Series OST RM TL 35-1/2 3-1/2 10 SWVL L N N 40.5 TNK Notes for charts below: PSS. S WT STPS 1 When recommending container lengths, weight distribution, fender interference and overhang are factors 2 actory tested with recommended container length and water level load 3 rame = top of truck chassis frame RV. S VLV LRN RQUR N ONTROL ON RV. S ROUN MSUR N RR TNMS /2 llustration applies to -OR style only. See next page for other models. Length is 18 if welding oil tank to tarper support, or 24 if unable to weld oil tank to the tarper support Use 22.5 tires only; for larger tires, consult representative Request additional tail length for truck frames higher than 45 -OR-174 -OR-194 -O-174 -O-194 TUR TNM XL TNM XL TNM XL TNM XL Recommended container size Rated capacity 2 60,000 lbs. 60,000 lbs. 60,000 lbs. 60,000 lbs. - eight above truck frame ack of ab to oist xle spread 51-60" 51-60" 51-60" 51-60" - Raised dump angle Top of truck frame to ground 3, 5, 6 45" 45" 45" 45" - Tire O to O 101-1/2" 101-1/ / /2 - lear ab to Trunnion (T) (includes behind the cab tank on tarper mounting platform) 188" 208" oist length 282-1/2" 305-1/2" 282-1/2" 302-3/4" - fter frame 25" 25" 25" 25" Lift cylinders 6 x 3-1/2 x 73 6 x 3-1/2 x 73 6 x 3-1/2 x 73 6 x 3-1/2 x 73 Lift cylinders shaft 2-3/4 solid 2-3/4 solid 2-3/4 solid 2-3/4 solid Winch cylinders 7 x 4 x 80 7 x 4 x 90 7 x 4 x 80 7 x 4 x 90 pprox. weight with standard features 7,882 lbs. 8,526 lbs. 8,378 lbs. 9,022 lbs.

3 TURS oist frame Subframe ront stop ront safety lock inge shaft able anchors able end Rear hold-downs Operating pressure ydraulic pump ydraulic valve Oil reservoir Outside rollers able sheaves Working points TRUK SPTONS hassis front axle hassis rear axle TNM XL 10 x 4" x 1/2" rade Tubing 4" x 4" x 1/4" rade tubing 1-1/2" plate utomatic spring loaded 2-1/2" solid steel Wedge and ferrule Swedged end swivel eye 3/4" plate located for standard Wastequip containers 3,200 psi ear type, 37-1/ RPM 2 spool / 45 PM with safety bypass 47 gallon with 3 micron filter and fill 4" O.. with bronze bearings 10" O.. with bronze bearings reasable RQURMNTS 18,000 lbs. (minimum) capacity with power steering 44,000 lbs. (minimum) capacity with walking beam suspension rame modulus 50,000 psi or more chassis frame - minimum section modulus = 24 in. 3 Torque required 383 foot pounds of torque -X-174 -X-194 -OX-174 -OX TUR TNM XL TNM XL TNM XL TNM XL TNM XL Recommended container size Rated capacity 2 60,000 lbs. 60,000 lbs. 60,000 lbs. 60,000 lbs. 50,000 lbs. - eight above truck frame ack of ab to oist xle spread 51-60" 51-60" 51-60" 51-60" 51-60" - Raised dump angle Top of truck frame to ground 3, 5, 6 45" 45" 45" 45" 45" - Tire O to O 101-1/ / / / /2 - lear ab to Trunnion (T) (includes behind the cab tank on tarper mounting platform) " 188" 208" 188" - oist length 242" / " / /2" / /2" / /4" - fter frame 25" 25" 25" 25" 25" Lift cylinders 6 x 3-1/2 x 73 6 x 3-1/2 x 73 6 x 3-1/2 x 73 6 x 3-1/2 x 73 6 x 3-1/2 x 73 Lift cylinders shaft 2-3/4 solid 2-3/4 solid 2-3/4 solid 2-3/4 solid 2-3/4 solid Winch cylinders 7 x 4 x 80 7 x 4 x 90 7 x 4 x 80 7 x 4 x 90 7 x 4 x 80 pprox. weight with std. features 8,849 lbs. 9,133 lbs. 9,316 lbs. 9,600 lbs. 7,555 lbs.

4 R S OUT 12" W N NTR PTRLT ORZONTL XUST ON NOR LOT ON PSS. S WT 1.5" OUTOR PROTRUN NR MOUNTS VLV LRN RQUR OTR SRS OST RWNS O Series OST RM TL 35-1/2 34-1/2 3-1/ SWVL L N X Series ROUN MSUR N RR TNMS 12-1/2 35-1/2 7" 2 3-1/2 10-3/8 10 OST RM TL XTNL (S ) SWVL L N ROUN MSUR N RR TNMS 12-1/2 7 2 Series OST RM TL / /2 40-3/16 ROUN MSUR N RR TNMS KNUKL L N

5 LRT QULTY Standard eatures albreath filter ompetitor s filter 3 micron (pictured at right) filtration system with dual viscosity oil reduces contamination, required maintenance and down time utomatic front container springloaded locking system and rear container hold-downs help ensure container remains in place Oil reservoir is filter cart ready, reducing maintenance costs ir assist bumper Plug n Play wiring system eliminates crossed wires, loose connections, corrosion and splices; allows for easy light replacement oist frames are huck bolted to chassis, providing unmatched strength and durability (factory mount only) vailable Options Rear skid plate with outboard supported rollers Optional rear ratchet straps on all cable models Pintle ready rear aprons allow for the addition of a pintle hook and easy upgrade to a trailer package

6 VLL OPTONS Pintle hook applications Various fender selections uxiliary hydraulic hook-ups Scale systems Pioneer Rack n Pinion tarping systems TRUK SPTONS Tandem axle: ront axle: 18,000 lbs. (min.) capacity Rear axle: 44,000 lbs. (min.) capacity 50,000 psi or more chassis frame Minimum section modulus = 24 in. 3 dditional information: Operating pressure is 3,200 psi and engine/ transmission torque required = 383 ft. lbs. ONTNR RQURMNTS NS RL ONTNR RQURMNTS 33-1/4 O.. Long Sills 1-1/4 18-1/2 Minimum ONTNR RQURMNTS 36-1/2.. Long Sills 40-1/2 O.. Long Sills Strap ook 78 for 18 feet thru 30 feet Rear old own 3-1/2 6 4 O.. Rail Roller X (See chart below for imension X ) 2-1/8 4-1/2 Max. 1-1/2 6 LT ONTNR RQURMNTS X (See chart below for imension X ) 5/ O.. X 4-1/2 W 7-3/8 8-1/4 3-1/ /2 2-5/8 36-1/2.. X 40-1/2 O.. LON SLL MNSON X * ONTNR LNTS MOL 18 ft. 20 ft. 22 ft. 24 ft. ll Models * imension X is center of rail roller to front of rear hold-down NOT: Tolerance for all models is +1 / -0 except where container lengths are not recommended or where more information is required. ll albreath products are designed to be compliant with NS standard container requirements. Wastequip is the leading North merican manufacturer of waste and recycling equipment for collecting, processing and transporting recyclables and solid or liquid waste. January Wastequip, all rights reserved. Specifications subject to improvement without notice. quipment displayed should be operated by properly trained personnel. Operators should become familiar with OS, NS and any other applicable standards or laws for using this equipment. mproper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in the literature are illustrative only. We assume no liability or responsibility for proper training/operation of equipment not manufactured by Wastequip. We reserve the right to make changes at any time without notice. nformation contained within this literature is intended to be the most accurate available at time of printing. L Tel: sales@wastequip.com