Telehandlers KT84, KT124, KT225, KT276. When it matters. The compact telehandlers from Kramer.

Transcription

1 Telehandlers KT84, KT124, KT225, KT276 When it matters The compact telehandlers from Kramer.

2 With their especially compact dimensions, Kramer telehandlers open up a wide range of applications across many areas of agriculture. These efficient machines impress with their dynamic 4-wheel drive, high payload, unbeatable maneuverability and low operating weight. The agile all-rounder in the farmyard. 2_3

3 When it matters There's something happening on the farm. 4_5

4 Up-to-date performance. Outfitting features that give you a head start every day. A new dimension of efficiency and safety: The Smart Handling operator assistance system not only fulfills the EN safety standard (protection against the longitudinal tipping of the machine) but also actively supports the operator through the automatic execution of the hydraulic functions. Including all sorts of power reserves: Thanks to the lifting and ripping forces, the hydraulics will meet and exceed all requirements in the farmyard. Designed with farsightedness: Low operating weight, ergonomic joystick console and a comfort cab with 360 panoramic view. Optimized for farm work: A Kramer machine provides a good overview and guarantees safety. A perfectly matched cab, low windows, and a sprung comfort seat are the basis for effective job performance. This is rounded off by the joystick, which replaces numerous levers. Domestic economy becomes child's play: With 1.90 m headroom and 1.41 m width, the KT84 is a true master for confined working conditions. When it matters Full performance in a tight space. Ready for new tasks in seconds: The hydraulic quick hitch system from Kramer saves time, increases safety, and sustainably improves your workflow. Compact and maneuverable: Strong hydrostatic all-wheel drive, an inner radius of only 595 mm, and a driving speed of up to 17 km/h. Impressive values and high mobility from Kramer. KT84 KT124 KT225 KT276 6_7

5 Enhanced performance in the farmyard. The compact and maneuverable telehandlers from Kramer. Compact, maneuverable, and powerful. These are the performance features of the Kramer telehandler, which in future will be a machine you cannot do without. The small inner radii and a driving speed of up to 28 km/h ensure a new farmwork mobility for the KT84 and the KT124. Inside radius INNER RADII mm KT KT KT225 1,193 KT276 1,700 Factors KT84 and KT124: - Ideal ratio of lift height, width, and machine performance. - Extremely small turning radii. - Easy to transport. - Good working ergonomics and clearly arranged instruments. 8_9

6 Power and performance in perfect form. You will love every detail. Lift 2.7 tons of payload nearly 6 meters high. With this power rating, the KT276 is recommended for your loading and transport work. The end position damping in the lifting telescopic cylinder makes handling material even more comfortable. A focus on the future: Low operating weight, ergonomic joystick console and a comfort cab with 360 panoramic view. When things get tight, it shows its real skill: With an overall height of less than 1.95 m and a loader width of 1.80 m, the KT225 is the ideal machine. Maintenance was never this easy: The engine hood can be folded up and completely removed if necessary. Work in your personal comfort zone: The optional adjustable steering column and comfort seat as well as the convenient control via the joystick make work easier. Drive for maximum performance: The hydrostatic all-wheel drive with inching brake pedal provides maximum power. Thanks to the high ground clearance and off-road capability, it can be used wherever it is needed. Low center of gravity for maximum stability Whether working in the stable or transporting straw bales across uneven terrain, the KT276 remains on the ground in every situation. Three steering modes and a high level of maneuverability. This is mobility of the premium class and always working from the ideal position ensures maximum productivity. KT84 KT124 KT225 KT276 10_11

7 New perspectives in safety and comfort. This also makes the telehandler from Kramer especially efficient. The love for technical solutions makes the machine. And the excitement of working with the machine creates the result. The compact telehandlers from Kramer are strong and quick. They are designed around human beings so that they can be efficiently used in any situation. The perfect visibility and the practice-oriented arrangement of the operator's controls make the difference. Viewing radius Viewing radius Full overview as a standard. An unobstructed view of the attachments and of the working area makes it easier to concentrate on the essentials and enhances safety. 12_13

8 Well-built for toughest conditions. The sturdy and stable telehandlers from Kramer. Regardless of what you do. Regardless of what your plans are. With the telehandlers from Kramer, you are perfectly equipped for heavy lifting. This is due to the sturdy design with undivided chassis, the strong hydraulics, and the perfect sizing of the boom. Heavy farm work has never been so easy. Even on open terrain, the telehandlers exploit their strengths highly modern all-wheel drive technology and high ground clearance. 1 1 Powerful and stable at the same time, loading and lifting work can be taken care of accurately. 2 Simply drive up to the attachment, hitch it up hydraulically from your seat, and safely unlock or lock it while keeping visual contact. 2 A proven principle and backbone of the long-time success of Kramer: The undivided chassis for perfect stability, consistently high payload without if's and but's and the optimal power to weight ration of the machine. Power and quality that are relayed. The hydraulic lifting arm is a small masterpiece of its own: From the highgrade steel through the tried-and-tested, well-protected hose guide to the perfect kinematics. 14_15

9 Having two machines in one is quite ingenious. With an impressive level of safety. Stricter requirements on the tipping safety of telehandlers are important for manufacturers and machine operators alike. That is why the standard EN requires an overload protection system for telehandlers in order to avoid the vehicle tipping over in the longitudinal direction during static operation. This is used for the maximum protection of the operator and the machine. However, practice has shown: Safety is often at the expense of productivity. For example, because hydraulic functions simply shut down in the event of an overload. At Kramer, we thought long and hard how we could make a virtue of necessity and furthermore create an additional benefit for our customers. Silver DLG Innovation Award Smart Handling Three* modes for all requirements Shovel mode When lowering the loader unit, it is automatically retracted. During lowering even at maximum payload this machine never enters the overload range. Stacking mode During raising and lowering of the loader unit, the telescopic arm automatically moves in a vertical line and automatically telescopes. The load center does not shift in the process the machine remains in the safe range. Quick stacking at higher altitudes are thus possible. Manual mode* When lowering the boom, the telescopic arm is not automatically telescoped in. If the overload limit is exceeded, the lowering movement is stopped only raising, telescoping, or tipping material is possible. The lowering speed increases with decreasing angle. Simply select Smart Handling: The mode can be switched via the keypad. *Manual mode is only available for the 2706 (standard) 16_17

10 Our attitude towards maintenance? Open for quick and easy service. 6 3 Also when it comes to service and maintenance, the Kramer telehandlers win customers over with quick and simple access to all components. Simply open the flap and perform maintenance you will be back at work in no time. The highly modern fault diagnosis tool also makes troubleshooting faults in the hydraulics and electronics a breeze. This saves time, money, and nerves All important maintenance points at a glance. 1 Hydraulic oil filler pipe 2 Hydraulic oil fill level inspection glass 3 Air filter 4 Engine oil filter 5 Engine cooling liquid compensating tank 6 Dipstick for engine oil fill level 7 The cover can be taken off (e.g. for replacing batteries) by removing a few screws. 8 The floor plates and the cover of the engine oil sump can be readily removed for optimum service access (e.g. oil change) _19

11 Your Kramer telehandler: Customized to your personal needs. Standard equipment and options. KT84 KT124 KT225 KT276 With Kramer, you are always on the safe side we offer telehandlers with comprehensive and sturdy standard equipment. In addition, with our different options, you can assemble your machine in terms of drive, tires, hydraulics and the operator's compartment so that it is one-hundred percent tailored to you, your business and your work tasks. KT84 KT124 KT225 DRIVE SYSTEM Hydrostatic all-wheel drive system Differential lock 100% Driving speed 0 17 km/h Driving speed 0 20 km/h Speed increase 28 km/h Speed increase 30 km/h TIRES Tires 27 x AS ET20 Tires 10.0/ AS ET40 Tires 10.5/80 18 AS ET0 Tires MPT01 HYDRAULICS 3rd control circuit, front 3rd control circuit front, proportionally via joystick 3rd control circuit, continuous function 4th control circuit, electrically double-acting High Flow, single-acting Pressureless runback Engine pre-heating + hydraulic oil 230 V Three-point receptacle in the rear Power take-off 540 rpm OPERATOR'S COMPARTMENT Operator's canopy ROPS and FOPS-tested (right window) Front window with wiper Rear window Cab with heating, ventilation and windscreen wiper ROPS and FOPS-tested (fully glazed) Work light mounted to the operator's compartment LED work light Comfort seat with seat belt Air-cushioned comfort seat with safety belt Seat heating Lighting equipment according to the road traffic licensing regulations Data confirmation OTHER Smart Handling overload assistance system Load stabilizer Fully automatic central lubrication unit Mechanical quick hitch system for attachments Hydraulic quick hitch system for attachments KT276 Standard Option Not possible Subject to change without notice. Errors and omissions are reserved. The contractual agreement is expressly decisive. 20_21

12 Specifications. Dimensions. KT84 KT124 KT225 KT276 X ENGINE DATA Manufacturer Yanmar Yanmar Perkins Kohler Type of engine (optional) 3TNV76 3TNV82A 404D-22 KDI 2504 TCR (3TNV84T) Cylinders Max. output kw/hp 19.2/ /31 (29.6/40) 36.3/ /75 (optional) at rpm 3,000 2,800 2,800 2,600 Displacement cm 3 1,116 1, ,482 Exhaust emissions stage IIIA IIIA IIIA IIIB Cooling Water Water Water Water K L M L1 M1 Y N F T V DRIVING HYDRAULICS Work hydraulics Discharge volume (optional) l/min (75) 70 (100) 90 Working pressure bar Z O C S D B A E H U Q P DRIVE SYSTEM Type of drive system Hydrostatic Hydrostatic Hydrostatic Hydrostatic Drive system Permanent allwheel drive Permanent allwheel drive Permanent allwheel drive Permanent allwheel drive VEHICLE DATA Operator's compartment (optional) FSD (cabin) FSD (cabin) Cabin Cabin Axle Planetary steering drive axle Planetary steering drive axle Planetary steering drive axle Planetary steering drive axle Driving speed (optional) km/h (30) 0 20 (30) Travel speeds Fuel tank capacity l Hydraulic oil tank capacity l Total swing angle of the attachment carrier (optional) (150) Total oscillating angle Max. steering lock 2 x 38 2 x 38 2 x 40 2 x 38 Raising/lowering lift cylinder sec 5.0/ / /4.2 6/4.2 Extending/retracting extension cylinder sec 3.5/ / / /3.8 Tilting tipping cylinder in/out sec 2.3/ / / /3.0 WEIGHTS Operating weight (standard) kg 2,270 2,700 4,200 4,900 Max. payload kg 800 1,200 2,200 2,700 ELECTRICAL SYSTEM Operating voltage V Battery Ah Alternator A NOISE CHARACTERISTIC VALUES Specified sound pressure level LpA db (A) KT84 KT124 KT225 KT276 DIMENSIONS Width with standard light materials bucket mm 1,450 1,600 1,900 2,000 A Total length mm 3,554 3,886 4,576 4,958 B Total length (with quick hitch facility and without attachment) mm 2,717 2,916 3,747 4,400 C Axle center to bucket pivotal point mm ,030 D Wheel base mm 1,795 1,920 2,449 2,650 E Rear overhang mm F Height with cab mm 1,900 1,940/1,960 2) 1,950 1,980 H Seat height mm / ,025 K Pivot point of quick hitch facility mm 4,145 4,503/4,523 2) 5,471 6,080 L1 Overhead loading height of retracted telescopic arm mm 2,725 2,909/2,929 2) 3,638 3,730 L Overhead loading height of extended telescopic arm mm 1) 3,799 4,123/4,143 2) 5,056 5,600 M1 Dumping height of retracted telescopic arm mm 1) 2,244 2,375/2,395 2) 3,103 3,450 M Dumping height of extended telescopic arm mm 1) 3,318 3,589/3,609 2) 4,520 5,280 N Dump reach mm 1) ) O Digging depth mm P Total width without attachment mm 1,413 1,560 1,808 1,960 Q Track width mm 1,252 1,296 1,530 1,660 S Ground clearance mm /306 2) T Max. outer radius mm 3,034 3,489 4,153 4,500 U Radius on outer edge mm 2,227 2,722 3,281 3,670 V Inner radius mm ,193 1,700 X Rollback angle at max. lift height Y Max. dumping angle /40 3) Z Rollback angle on bottom ) with standard bucket 0.85 m 3 2) value in chassis of large engine *With engine technology in accordance with exhaust emission stage IIIB. 3) with a total pivoting angle of 150 FSD = operator's canopy All values with standard light materials bucket and standard tires 22_23

13 Load-bearing capacity diagrams. Vibration characteristic values KT 124 Load diagram KT 84 Load diagram 60 Vibration 1,2 69 VIBRATIONS 1100 kg 40 < 2.5 m/s² Highest effective weighted acceleration value for the body < 0.5 m/s² 1. Inform operator of the dangers caused by vibration 2. Uncertainty of measurement of the vibration measurement in accordance with DIN EN 474-1: and EN 12096: kg 440 kg kg 920 kg 30 Total vibration value of the upper body limbs 10 KT 225 Load diagram KT 276 Load diagram All technical information in this brochure refers to the series models tested under Central European operating conditions and describes their standard functions. The outfitting and their operating procedures as well as the accessories depend on each model and the product's options as well as the country-specific requirements of the country of sale. Illustrations may not indicate unmentioned or non-standard products. The descriptions, illustrations, weight information and technical data are non-binding and are in keeping with the latest technological developments at the time of printing. We reserve the right to make changes in the area of design, outfitting, look and technology without advance notice due to the ongoing development of the products. If you require special features that are only available by using additional components and/or under special boundary conditions, please contact us! We will be happy to answer your questions and give you information regarding whether and under which requirements for the product and environmental conditions special functions can be represented. If you have concerns regarding the load-carrying capacity or the effectiveness of our products due to special conditions, we recommend test runs under controlled boundary conditions. Despite using the utmost care, we cannot rule out deviations of illustrations or dimensions, calculation errors, printing errors or omissions in the brochure. We therefore assume no liability for the accuracy and completeness of our information in this brochure. We guarantee the flawless functionality of our products as a part of our general terms and conditions of business. We generally do not accept any additional guarantees. Any other liability than the liability in our general terms and conditions of business is excluded. 24 _ 25

14 Only a Kramer is a Kramer. The Kramer plant. We are located in Pfullendorf in southern Germany. We are a leading global manufacturer of skid steer loaders for the construction and agriculture industries and are part of the Wacker Neuson Group. We pride ourselves on the values of a medium-sized, family-owned company that is publicly traded. With the strength and expertise of a globally active organization. With people who fulfill our motto every day. What we believe in: Quality, innovation, performance, and character and the sustainable success of our customers. 26 _ 27

15 Kramer-Werke GmbH Wacker Neuson Straße Pfullendorf Germany Tel * Fax +49(0) info@kramer.de *free of charge Kramer-Werke GmbH is a subsidiary of Wacker Neuson SE, Munich. *KA.EMEA V01.EN-GB* KA.EMEA V01.EN-GB