XD XG A Technical Data

Transcription

1 XD XG A Technical Data

2 XD XG A Technical Data VDI 2198 Specification Manufacturer Model designation Type of drive: Electric Diesel Petrol GPL Network Power (Electric) Operation Type: Hand Standon XD25 Diesel Load Capacity Load Barycenter Distance Axle centre to fork face Wheel Base Q (t) c () x () y () 2.5 0) Weights Service Weight Axle Weight with Rated Load front / rear Axle Weight without load front / rear kg kg kg ) 5775/705 17/2220 Wheels and 3.1 : SE = Superelastic PN = Pneus 3.2 Front Size ) Rear Size : Number of Front / Rear (x = drive) 4) Front Track Width Rear track Width b10 () b11 () ) Dimensions and 4.1 Mast lift, forward / backward Grad Overall Sizes 4.2 Mast Minimum Overall Height h1 () ) 4.3 Free Lift h2 () 6) 4.4 h3 () Mast Maximum Overall Height Overhead Guard Height Seat Height Drawbar Height Overall Length Overall Length Including Fork Arms Overall Width Fork Arms Dimensions Fork Carriage in Compliance with DIN Class / Form A, B Fork Carriage Width h4 () h6 () h7 () h10 () l1 () l2 () b1/b2 () s/e/l () b3 () ) ) /1648 (twin) A Performance Engine Others Mast Ground Clearance (with load) Chassis Ground Clearance (with load) [middle of the chassis] Aisle Width with Pallet 1000x1200 and Fork Arms Pitc200 Aisle Width with Pallet 800x1200 and Fork Arms Pitch 800 Turning Radius Turning Point Minimum Distance from the Truck Center Line Drive Speed with / without load Lifting speed with / without load Lowering speed with / without load Drawbar Pull Tractive Effort (at 2 km/h) with / without load Gradeability (at 2 km/h) with / without load Acceleration Time (15 m) with / without load Service Brake Engine Manufacturer / Engine Type Engine Power Rated Number of Revolutions Cylinder Number / Displacement Fuel Consumption in compliance with VDCycle Drive Control Type Service Pressure for Attachments Oil Flow rate for Attachments (max. available) Noise at Operator s Ear Drawbar, model/type DIN m1 () m2 () Ast () Ast () Wa () b13 () km/h m/s m/s N % s kw min 1 cm 3 l/h bar l/min db (A) 105 9) / / /25 4.8/4.3 YANMAR 4TNE98UPOMD /3300 3,6 1 86,2 The values presented are to be taken as indicative and not binding; they refer to the standard equipment 0) The actual load capacity is in accordance with the position of load centre distance, the type of mast lifting height, tyres and any equipment 1) With Tx mast+25. 2) With Side Shifter hookon: 2.5T+,3.0T+67. 3) Detail refer to table of Component Weight 4) Refer to tables ) 6 / 6 (SX/DX mast with h and TX mast) 6) Other dimension and specification can be chosen. (Refer to , , ) 7) XD25/XG25: 1057(27x1012) 8) XD25/XG25: b1=1320(27x1012) 9) XD25/XG25:96 (TX mast), XD30/XG30: 106 (TX mast)

3 XD30 Diesel XG25 LPG XG30 LPG ) 2.5 0) 3.0 0) ) 6570/ / ) 5775/725 17/ ) 6575/ / ) ) ) 3.2 4) ) ) 4) ) ) ) 4.2 6) 6) 6) ) /1648 (twin) A ) ) /1648 (twin) A ) /1648 (twin) A ) / / /21 5.1/4.3 YANMAR 4TNE98UPOMD /3300 3, , ) / / /24 5.1/4.5 NISSAN K / ) / / /21 5.3/4.6 NISSAN K /

4

5 LIFT MAST SPECIFICATIONS Simplex PN (7.0012/pr16) *1 Duplex PN (7.0012/pr16) XD 25 XG 25 with 6 Rollers Fork Carriage Triplex SE (27x1012) *2 Special Triplex 4625 PN (27x1012/pr14) SE (27x1012) Simplex PN (27x1012/pr14) Duplex PN (27x1012/pr14) XD 30 XG 30 with 6 Rollers Fork Carriage Triplex (27x1012) *2 Special Triplex 4625 PN (27x1012/pr14) SE (27x1012) *1 With SE tyres (7.0012) overall lowered height (2.5t) = h118 *2 With PN tyres (27x1012/pr14) overall lowered height = h1+10 WHEELS Type Superelastic Pneumatic Front Rear Front Rear XD 25 XG single (SXDX) /16pr single (SXDX) 27x1012 single (TX) 27x1012/14pr single (TX) twin (TXSXDX) /16pr twin (TXSXDX) XD 30 XG 30 27x1012 single (SXDXTX) 27x1012/14pr single (SXDXTX) twin (TXSXDX) /16pr twin (TXSXDX)

6 XD XG A Internal combustion 2.5t to 3.0t counterbalanced forklift trucks The new XD/G 2530 is the latest evolution of OM knowhow in designing and building internal combustion forklift trucks. Each and every detail has been reviewed and enhanced: comfort, productivity, easy servicing, low operating costs and low pollution levels are the main fields of improvement. The design of the XD/G 2530 is by Zagato harmonizing together style and full functionality. The operator s place was completely redesigned to grant the user optimum comfort: it is fully suspended on rubber silent blocks to absorb vibrations (F.S.C. Full Suspended Cab system); as standard the manual reverse levers and large inching/brake pedal. The hydrodynamic transmission, perfectly tuned, allows the best precision and smoothness in handling activities. The noise level is kept low by mean of an accurate acoustic insulation system. All driving coands of XD/G 2530 range are servoassisted: inching/braking pedal and hydrostatic steering with an effort required lower than 0.5 Kg. The new Yanmar diesel engine, 3.3 liters of displacement is compliant to Stage IIIa requirements of Directive 97/68/CE. The LPG version is powered by the Nissan engine with a displacement of 2.5 liters. Both powerlines are industrial type and specifically designed for forklift trucks applications. They grant the right power and torque, environmentally friendly with the lowest fuel consumption. Simplex, duplex and triplex masts with heights up to 6 are available. Standard configuration: Engine YANMAR (diesel) / NISSAN K25 (lpg) Fork carriage 1150 Forks 1000 Vertical exaust pipe (both diesel and lpg versions) Hydrodynamic transmission with torque converter Hydraulic power steering F.S.C. (Full suspended cab) Suspended seat Pneumatic tyres Handbrake Adjustable steering column Lever forward/reverse and pedal inching/braking Low fuel warnig light Hourmeter Multifunctional display with check panel Reverse audible alarm Stop and front/rear lights Inching system Towing pin Grip handle Documentation s language english (cdrom) CE certification Options: 3rd and 4th hydraulic systems, hookon and integrated sideshifts, comfort seats, flash beacon and lights, SE wheels, load beckrest, right and left mirrors. Technical data are given as an indication. OM Carrelli Elevatori reserves the right to modify them without notice. Viale A. De Gasperi, 7 I20020 Lainate (MI) Tel.: +39(02) Fax: +39(02)