TRACTOR: LOADER-BACKHOE

Transcription

1 Price quote for: TRACTOR: LOADER-BACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Titan Machinery Inc. Andy Bethel 6340 County Road 101 E Shakopee, MN andy.bethel@titanmachinery.com Version of Excel used: 2007 Spec # Information Requested Answer 1.0 Make & Model Case 580SN WT 4WD Price for base unit $ 67, Tier 3, 3i, or 4? Tier 4 Engine HP gross/net (SAE) Aspiration Transmission, type and number of forward and reverse gears Hydraulic pump (GPM and PSI) GPM for backhoe GPM for loader Brakes Steering Drive Axles Front tires, size and type Rear tires, size and type 97 hp gross/ 95 hp net Turbo Charged 4F/4R Synchromesh psi 40 gpm 31.5 gpm Hyd wet disc brakes Hydrostatic Planetary 12.5/80X18, 10PR 21LX24 10PR Backhoe digging depth (SAE) (Standard stick) 14' 5" Backhoe digging depth 2' flat bottom (SS) 14' 3" Backhoe reach from swing pivot at ground line (SS) 18' 1" Backhoe loading height (SS) 11' 2" Backhoe loading reach (SS) 8' 9" Backhoe digging depth (SAE) (Retracted extendable stick) 14' 10" Backhoe digging depth (SAE) (Extended extendable stick) 18' 3" Backhoe digging depth 2' flat bottom (RES) 14' 10"

2 Backhoe digging depth 2' flat bottom (EES) 18' 2" Backhoe reach from swing pivot at ground line (RES) 18' 5" Backhoe reach from swing pivot at ground line (EES) 21' 10" Backhoe loading height (RES) 11' 5" Backhoe loading height (EES) 13' 3" Backhoe loading reach (RES) 8' 8" Backhoe loading reach (EES) 11' 6" Loader capacity (SAE) standard bucket 1 cu yd Loader standard bucket width 93" Loader maximum operating height 14' Loader lift capacity at maximum height Loader breakout force 6,182 lbs 9,667 lbf Loader maximum hinge pin height 11' 2" Loader dump reach at maximum height 30" Loader maximum bucket roll back at ground level 40 degrees Loader digging depth, with bucket flat 5.9" Lights, front/rear Gauges Warranty Term (months, years) 2 headlights, 4 rear floods, 2 front floods 12 Areas monitored one year unlimited hours two years/2000 hourspowertrain

3 Price quote for: TRACTOR: LOADER-BACKHOE VENDOR NAME MAKE AND MODEL Titan Machinery Inc. Case 580SN WT 4WD Spec # Description Price 1.0 Price for base unit: $ 67, OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers as you need. 2.1 Air conditioning $ 1, Mech. suspension (cloth) with arm rests, Cab unit only $ Deluxe air suspension (cloth) with arm rest, Cab unit only $ Mech. Suspension, Vinyl, w/armrests standard 2.5 Deluxe air suspension, Vinyl $ Deluxe Cab Package $ (includes deluxe interior, visor, windshield washers, 72 dba sound level) 2.7 Deduct for ROPS only - (no cab) $ (3,561.00) 2.8 Deluxe ROPS pkg - windshield w/wiper, 2 additional lights frt & rear $ Fire Extinguisher # ABC - BIC $ Tool box $ Weatherband AM-FM Stereo Radio (Factory) $ Auto Ride control - factory $ Optional right hand door on cab with A/C $ Tilt Steering Wheel - Cab only standard 2.15 Comfort Steer $ " seat belt ILOS $ Mirror Package - BIC SI3045 $ Heated Mirror package - BIC SI3045-H $

4 2.19 Special Paint $ 3, Chrome Exhaust Stack $ ELECTRICAL 3.1 Cold start aid - block heater standard 3.2 Corner Strobe Set LED - mount in Turn Signal Housing - BIC $ Strobe light - Whelen $ Master Electric Disconnect Pkg - BIC $ Rotating Beacon - Factory Installed $ Battery Disconnect / Jump start terminals $ Dual batteries $ POWERTRAIN 4.1 Fuel tank, 42 gallon $ (973.00) 4.2 Powershift - S Type Transmission standard 4.3 Powershift - H Type Transmission $ 1, AXLES & TIRE OPTIONS /80X18 10PR Sure grip lug standard LX24 10PR standard Extra Tire & /80X18 10PR Sure grip lug $ LX24 10PR $ Counterweight, front (700#) for standard backhoe $ Counterweight, front (1100#) for standard backhoe $ Counterweight, front (1100#) for extendahoe ILO 440# standard $ Stabilizer Guard Set - BIC $ HYDRAULICS Loader 6.1 Auxiliary hydraulics and controls for units w/manual controls. $ (included with 4 in 1 or hydraulic quick attach) 6.2 Auxiliary hydraulics and controls for units w/pilot controls. $ (included with 4 in 1 or hydraulic quick attach) Backhoe 6.3 Combo Direct. auxiliary hydraulics for units w/pilot Controls $ 2, Controlled by switch on left joystick. Capped tubes routed to dipper stick.

5 6.4 Combo Direct. auxiliary hydraulics for units w/manual Controls $ 2, Capped tubes routed to dipper stick. 6.5 Uni-directional auxiliary hydraulics for units w/pilot Controls, for use $ 1, w/hammers.(includes boom guard) Adjustable single direction flow of up to 28.5 gpm controlled by switch on left joystick, Capped tubes routed to dipper stick. 6.6 Uni-directional auxiliary hydraulics for units w/manual Controls, for use $ 1, w/hammers.(includes boom guard) Adjustable single direction flow.of up to 28.5 gpm controlled by foot switch. Capped tubes routed to dipper stick. 6.7 Auxiliary hydraulics for backhoe - BIC K2800/2900 $ 2, (single direction w/8 flow settings - EPiC Kit - internal tubes) 6.8 Auxiliary hydraulics for backhoe - BIC K5800/5900 $ 3, For both Hyd Hammer and hyd Thumb, Finger switch for thumb, foot control for hammer. EPiC Kit with Internal tubes 6.9 Power Lift, only for mech. Controls (std on pilot) standard 7.0 BACKHOE OPTIONS 7.1 Extendahoe $ 3, Dual lever control, direct linkage or Foot Swing control standard 7.3 Pilot Controls with infinite variable fore/aft & lateral $ 1, position. Includes backhoe/excavator pattern switch. and auto-up stabilizer control 7.4 Hydraulic Backhoe coupler $ 1, Combination stabilizer pads, flip-over standard 7.6 Cleated dirt pad - ILO flip-over pads standard $ (463.00) 7.7 Street / Cemetery pads - ILO flip-over pads standard $ (337.00) Backhoe Buckets - one required " Universal (3.40 cu ft/.10 cu m heaped capacity) $ " Universal (5.30 cu ft/.15 cu m heaped capacity) $ " Universal (7.70 cu ft/.18 cu m heaped capacity) $ " Universal (10.20 cu ft/.29 cu m heaped capacity) $ " Universal (12.70 cu ft/.36 cu m heaped capacity) $

6 " heavy duty - Hi-Capacity (8.50 ft/.22cu.m heaped capacity) $ " heavy duty - Hi-Capacity (10.60 ft/.30cu.m heaped capacity) $ KENT DEMOLITION (standard with working steel, whip hoses, tool kit, and with couplers, plus QA mtd) QT = QUIET VERSION 10M) 7.15 FX45 FSP $ 7, FX45 QT $ 8, Moil point 2.4" x 22", 25 lbs $ Chisel point 2.4" x 22", 25 lbs $ Blunt point 2.4" x 22", 25 lbs $ Asphalt cutter, cross, or in-line $ Tamper assembly $ FX55 FSP $ 9, FX55 QT $ 9, Moil point 2.6" x 23.6", 33 lbs $ Chisel point 2.6" x 22", 33 lbs $ Blunt point 2.6" x 23.6", 33 lbs $ Asphalt cutter, cross, or in-line $ Tamper assembly $ FX65 FSP $ 11, FX65 QT $ 11, Moil point 3.0" x 25", 45 lbs $ Chisel point 3.0" x 25", 45 lbs $ Blunt point 3.0" x 25", 45 lbs $ Asphalt cutter, cross, or in-line $ Tamper assembly $ Plate Compactors 7.36 KHP 35ME lb - 12" wide $ 4, KHP 35ME FT lb - 12" wide $ 5, KHP 65TLB lb $ 5, KHP 65 FT lb $ 6, KHP 75TLB lb $ 5, KHP 75 FT lb $ 6, KHP 135 II FT/FB - 13,500 lb $ 9, Compaction Wheels 7.43 KCW 18-18" wide $ 4,610.00

7 7.44 KCW 24-24" wide $ 6, KCW 36-36" wide $ 9, Amulet - 12" or 16" width thumb 7.46 Thumb - Non Hydraulic FIXED w/adj strt CT BIC $ 3, Thumb - HYD - CT20 POWERBRUT (req. aux hyds) - BIC $ 4, McMillen Hydraulic Augers (req back hoe Hyds) 7.48 Mounting Plate - auger to backhoe $ Hydraulic auger, planetary drive, gpm X1475 $ 1, Hydraulic auger, planetary drive, gpm X1975 $ 1, Hydraulic auger, planetary drive, gpm X2475 $ 1, Hydraulic auger, planetary drive, gpm X3575 $ 2, Fixed length Extension - 12" $ Variable length Extension - 24" $ Variable length Extension - 48" $ Auger Bits for difficult ground "HDC" Style " x 48" with 2" hex collar $ " x 48" with 2" hex collar $ " x 48" with 2" hex collar $ " x 48" with 2" hex collar $ " x 48" with 2" hex collar $ " x 48" with 2" hex collar $ " x 48" with 2" hex collar $ 1, " x 48" with 2" hex collar $ 1, Tree Augers "/30" x 48" with 2" hex collar $ "/36" x 48" with 2" hex collar $ 1, Mech Coupler Retrofit Kit $ Hydraulic Coupler Retrofit Kit $ Gripper Teeth Extension $ FRONT LOADER OPTIONS - one bucket required " wide, long lip (1.3 cu yd) $ 1, (includes bolt on edge) " wide, long lip (1.5 cu yd) $ 1, (includes lift eyes and bolt on edge)

8 8.3 4 in 1 Bkt (1.2 cu yd) - $ 3, ( includes ldr hyds, and bolt on edge, requires 3-pt or ctwt. ) 8.4 Hydraulic Quick attach for loader bucket (includes loader aux hydraulics) $ 2, FFC Equipment 8.5 QA Coupler, manual quick attach (grey), LAF1721 $ 2, QA 83" wide GP Bucket (1.11 cu yd) with BOE, LAF3382 $ 2, QA 92" wide GP Bucket (1.23 cu yd) with BOE, LAF3390 $ 2, QA 83" wide Scrap grapple bucket, LAF5283 $ 6, QA 82" wide 4-in-1 bucket, LAF3182 $ 5, QA Pallet forks, 48" tines, 60" backplate (grey), #10047 $ 3, QA 108" Floating Snow Blade (loader hyd. Req.), #11508 $ 3, QA 96" Angle broom, 22096P $ 5, Hydraulic Angle kit for broom, Code H $ 1, QA coupler black female ears for existing buckets, LAF1723 $ RoadHog Milling Attachments 8.15 RH " Drum with 80hp Engine and Female FFC QA $ 67, RH " Drum with 80hp Engine and Female FFC QA $ 68, Lights, 2 on engine cowling, 1 on master panel, w/panel switch $ Horn with button on master panel & remote $ RoadHog Oil Injection kit $ 1, Pin on Attachment ILO quick attach that is standard $ 1, Gal. tank mounted water kit $ 2, " Drum for RH 3075 $ 7, " Drum for RH4075 $ 8, " Drum for RH4075 $ 9, PERFORMANCE OPTIONS Use this section to offer performance options. Number items starting with 9.1, 9.2, etc. Use as many numbers as you need. 9.1 One set OEM air and fluid filters standard 9.2 One set Parts, service, and operations manuals on CD standard 10.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 10.00

9 11.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: N/A Weekly Rental Rate: $ Monthly Rental Rate: $ 2, Percent (%) of Rental Fee applied to purchase price: 80% first 90 days If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS 12.0 Delivery Starting Point - City, State, Zip code Nearest Titan Machinery Case CE Location 12.1 Price per loaded mile $ Warranty Details: Months, Years, Hours, etc.: Case standard warranty is for one year - unlimited hours Engine is two years or 2000 hours EXTENDED WARRANTY OPTIONS Case Warranty covers the CASE machine only. Protection Plan must be purchased with-in first 90 days or add 15% additional during base warranty. Mfg's standard warranty is applicable to non-case equipment. Case Purchased Protection Plan - Zero deductible Months/hours Coverage / power train only $ / power train only $ 1, / power train only $ 1, / power train only $ 1, / power train plus electronics or hyds $ / power train plus electronics or hyds $ / power train plus electronics or hyds $ 1,988.00

10 / power train plus electronics or hyds $ 2, / power train plus electronics or hyds $ 3, / full machine $ 1, / full machine $ 2, / full machine $ 3, / full machine $ 4, / full machine $ 5, HOURLY SHOP RATE $ (Installation services may be requested on an "as needed" basis)