ZE500GHRS series ZE500HRS series

Transcription

1 For Large Size Truck ZE500GHRS series ZE500HRS series (Oceania)

2 IDEAL Cargo Crane, TADANO ZE The ZE features all the Tadano Cargo Crane technology that is recognized the world over. The key development concepts remain: EXCELLENT QUALITY, EASY OPERATION AND EASY MAINTENANCE. The ZE500GHRS with the maximum lifting capacity of 4.04 tons has a choice of 3 different lengths of the boom while the ZE500HRS with the maximum lifting capacity of 3.13 tons has a choice of 4 different lengths of the boom, to meet your lifting solutions. Newly Developed Radio Controller, of low electric power consumption type, displays at all times operating conditions such as the actual load, rated load, moment ratio on the liquid-crystal screen to further enhance safety working efficiency. JAMMING 40-CHANNELS WHL (Working Height Limiter) is designed to stop the boom elevation or telescoping when the boom tip reaches the registered height. (as pre programmed by the operator) This function secures STOP! safety particularly when working under the roof or in the tunnel or every height limited condition. The with a five-section long boom makes its debut in the market which supersedes the ZR506 (previous model, six-section boom). The newly developed five-section boom makes the same length as the vs ZR506 (Previous model) Lifting Chart at Fully boom extended. conventional six-section boom LIFTING CAP (t) TOP BOOM ZR enhance crane performance 0.5 by max. 130% compared to 0.0 the conventional LOAD RADIUS (m) six-section boom. NEW HEPTAGONAL BOOM 40 FREQUENCY RESPONDING TO OPERATOR S COMMAND Equipped with an optimally matched, high-performance control valve, the operating levers provide improved responsiveness fine-tuned control. Operation is fast or slow in accordance with operator s comm. The stainless rods between left right operation levers are provided as stard. The "Hook-In" system further enhances work efficiency. When the "Hook-In" switch swing switch are operated, the crane boom jack is stowed automatically. * Except 5L section boom AML The AML is a system that monitors controls crane working conditions including the state of a lifted load to ensure safer operation in addition to the outrigger middle extension function now available for the model. The advantages from the enlarged winch drum plunger motor are evident during start-up when maximum power is required. Re-hoisting with a load on the hook can also be hled with ease. The winch reduction gear comes equipped with a failsafe automatic brake. JACK INTERLOCK Jack interlock system ensures that outriggers are deployed before crane is allowed to be unfolded. Automatic crane capacity deration should horizontal outrigger extension be not fully extended. FULL CIRCLE, CONTINUOUS SWING The newly designed compact swing post improves performance providing FULL CIRCLE, continuous rotation for more efficient operations. AUTOMATIC SWING LOCK: The boom is mechanically locked at the swing post base which prevents boom rotation during vehicle travel. CENTRALIZED CONTROL PANELES Installed on both sides of the swing post is the centralized control panel where operating switches the lifting chart needed for crane operation are grouped together arranged on a single panel. RIGHT-HAND SIDE The undercoating of the crane is done by Cationic Electro-deposition coating. Soaking each materials even the narrow inner booms frames are thoroughly undercoated. GREATER WINCH CONTROL LEVER LEFT-HAND SIDE CATIONIC ELECTRO-DEPOSITION COATING HOOK IN High-Powered Radio Controller Radio Controller with powerful transmitting output automatically selects a frequency free of jamming, out of RADIO CONTROL OTHER ELECTRIC WAVES automatic transfer as many frequencies as 40 channels, to avoid interference troubles. NEW FIVE-SECTION LONG BOOM Tadano's unique heptagonal boom is made of high-tensile steel. The new boom is a structure of one piece steel plate for lower boom weight powerful lifting capacity. Special valves enable smooth boom extension retraction for smoother operation to reduce a shock when telescoping the boom. The cables sheaves are all internal - for a clean, clutter - free appearance. RADIO CONTROLLER WITH LIQUID-CRYSTAL DISPLAY 1 BOOM HEIGHT LIMIT FUNCTION THREE-POINT SUPPORT SYSTEM (Equalizer Crane Support) Photo: Tadano's Equalizer Crane Support protects the truck frame from stress. The crane is mounted to the truck chassis with the Equalizer Crane Support that evenly distributes the load to prevent excessive stress concentration at any one point.

3 ZE500GHRS series Maximum 3,800 mm QUICKER WORK WITH OUTRIGGER MECHANISM The outrigger beams can be easily operated, using a grip to lock or release extend or retract. Further more safety, new lock system prevents the outrigger beams from extending during vehicle travel. A level gauge is provided as stard equipment. WORKING RANGE 5m m 15m 8.31m LIFTING HEIGHT (m) LIFTING DEPTH BELOW GROUND LEVEL (m) (15.2) (12.7) (.3) (-9.4) (8.09) (.58) (13.12) -12 (-12.4) (-15.3) -16 RADIUS(m) NOTE: The above lifting heights boom angles are based on a straight (unladen) boom, allowance should be made for boom deflection obtained under laden conditions..8m mBOOM.8mBOOM 8.31mBOOM 13.34m TECHNICAL SPECIFICATIONS MODEL CRANE CAPACITY 4,040kg at 2.95m 4,040kg at 2.9m 4,040kg at 2.8m (5-part lines) (5-part lines) (4-part lines) BOOM Fully hydraulic telescoping boom Fully powered partly synchronized telescoping boom Sections Length 3.47m m 3.55m -.8m 3.77m m Extending Speed 4.84m / 18s 7.25m / 21s 9.57m / 25s Elevation Range/Speed 1 to 78 /12s Max. Hook Height* Approx..3m* Approx. 12.7m* Approx. 15.2m* Max. Load Radius* 8.09m*.58m* 13.12m* WINCH Hydraulic motor driven. Spur gear speed reduction, provided with mechanical brake. Max. Single Line Pull 7.92kN {808kgf} Max. Single Line Speed 76m/min. (at 4th layer) Wire rope (Diameter x length) 8mm x 67m 8mm x 82m 8mm x 97m SWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360 full circle swing on ball bearing slew ring. Automatic swing lock. Speed 2.5 min -1 {rpm} OUTRIGGERS Manually extended sliders hydraulically extended jacks Integral with crane frame Power up down Extended Width Max.: 3.8m, Mid.: 3.0m, Min.: 2.2m HYDRAULIC SYSTEM Control Valves Multiple control valves with integral safety valve STANDARD SAFETY EQUIPMENT AML(Automatic Moment Limiter) <Load indication, Load moment ratio to rated load indication, Warning alarm, Over load limiter> WHL(Working Height Limiter) Load meter Radius indicator Emergency stop switch on radio controller Terminal for emergency stop switch Over-winding alarm Hoisting limiter Jack interlock P.T.O indicator lamp Hook safety latch Hydraulic safety valves, check valves holding valves Level gauge SUITABLE TRUCKS Gross vehicle mass 12,000 to 25,000kg RATED LIFTING CAPACITIES - Empty Chassis Table A Rated Lifting Capacity (kg) 4,040 3,280 2,930 2,430 2,030 1,730 1,430 1, Rated Lifting Capacity (kg) 3,130 2,680 2,4302,030 1,730 1,430 1,330 1,180 1, Rated Lifting Capacity (kg) 4,040 2,930 2,430 1,980 1,680 1, Rated Lifting Capacity (kg) 3,130 2,930 2,430 1,980 1,6801,430 1,1801,130 1, Rated Lifting Capacity (kg) 2,130 1,980 1,630 1,180 1, Rated Lifting Capacity (kg) 4,040 2,930 2,530 1,930 1,630 1,380 1, Rated Lifting Capacity (kg) 3,130 2,930 2,530 1,930 1,630 1,380 1,130 1, Rated Lifting Capacity (kg) 2,230 1,930 1,580 1, Rated Lifting Capacity (kg) 1,430 1, Table B Rated Lifting Capacity (kg) 4,040 3,380 2,930 2,480 2,080 1,780 1, Rated Lifting Capacity (kg) 3,130 2,930 2,480 2,080 1,780 1,580 1,430 1,280 1,130 1, Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,430 2,030 1, boom 3.7 Rated Lifting Capacity (kg) 3,130 2,930 2,430 2,030 1,730 1,480 1,380 1,230 1, Rated Lifting Capacity (kg) 2,130 1,980 1,480 1, Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,430 1,980 1,680 1, Rated Lifting Capacity (kg) 3,130 2,930 2,430 1,980 1,680 1,430 1,280 1,130 1, Rated Lifting Capacity (kg) 2,230 2,180 1,930 1,430 1, Rated Lifting Capacity (kg) 1,430 1,330 1, Table C Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,630 2,380 2,130 2, Rated Lifting Capacity (kg) 3,130 2,930 2,630 2,380 2,130 1,880 1,730 1,530 1,380 1, Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,580 2,330 2, Rated Lifting Capacity (kg) 3,130 2,930 2,580 2,330 2,030 1,830 1,650 1,480 1,350 1, Rated Lifting Capacity (kg) 2,130 2,030 1,780 1,480 1,200 1, Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,530 2,230 1,980 1, Rated Lifting Capacity (kg) 3,130 2,930 2,530 2,230 1,980 1,730 1,580 1,430 1,250 1, Rated Lifting Capacity (kg) 2,230 2,180 2,030 1,730 1,400 1, Rated Lifting Capacity (kg) 1,430 1,330 1,230 1, Table D Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,630 2,380 2,180 2, Rated Lifting Capacity (kg) 3,130 2,930 2,630 2,380 2,180 1,980 1,830 1,680 1,530 1, Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,580 2,330 2, Rated Lifting Capacity (kg) 3,130 2,930 2,580 2,330 2,080 1,930 1,780 1,630 1,480 1, Rated Lifting Capacity (kg) 2,130 2,030 1,780 1,530 1,380 1,200 1,050 1, Rated Lifting Capacity (kg) 4,040 3,130 2,930 2,530 2,230 1,980 1, Rated Lifting Capacity (kg) 3,130 2,930 2,530 2,230 1,980 1,780 1,630 1,480 1,380 1, Rated Lifting Capacity (kg) 2,230 2,180 2,030 1,730 1,430 1,230 1, Rated Lifting Capacity (kg) 1,430 1,330 1,230 1, * The cables sheaves are all internal - for a clean, clutter - free appearance. Max.Boom Extended length TECHNICAL SPECIFICATIONS NOTE: 1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 60L/min. 2. *No allowance made for boom deflection under laden conditions. RATED LIFTING CAPACITIES NOTE: The mass of hook (30kg), slings all similarly used load hling devices must be added to the mass of the load.

4 ZE500HRS series Maximum 3,800 mm QUICKER WORK WITH OUTRIGGER MECHANISM The outrigger beams can be easily operated, using a grip to lock or release extend or retract. Further more safety, new lock system prevents the outrigger beams from extending during vehicle travel. A level gauge is provided as stard equipment. * The cables sheaves are all internal - for a clean, clutter - free appearance. WORKING RANGE 5m m 15m 8.31m LIFTING HEIGHT (m) LIFTING DEPTH BELOW GROUND LEVEL (m) (17.5) (15.2) (12.7) (.3) (8.09) (.58) (13.12) (15.47) (-9.4) (-12.5) (-15.5) (-18.2) -20 RADIUS(m) NOTE: The above lifting heights boom angles are based on a straight (unladen) boom, allowance should be made for boom deflection obtained under laden conditions..8m Max.Boom Extended length mBOOM 13.34mBOOM.8mBOOM 8.31mBOOM 13.34m m 1 TECHNICAL SPECIFICATIONS MODEL CRANE CAPACITY 3,130kg at 3.8m 3,130kg at 3.7m 3,130kg at 3.6m 3,130kg at 3.6m (4-part lines) (4-part lines) (4-part lines) (4-part lines) BOOM Fully hydraulic telescoping boom Fully powered partly synchronized telescoping boom Sections Length 3.47m m 3.55m -.8m 3.77m m 4.32m m Extending Speed 4.84m / 18s 7.25m / 21s 9.57m / 25s 11.37m / 29.5s Elevation Range/Speed 1 to 78 /12s Max. Hook Height* Approx..3m* Approx. 12.7m* Approx. 15.2m* Approx. 17.5m* Max. Load Radius* 8.09m*.58m* 13.12m* 15.47m* WINCH Hydraulic motor driven. Spur gear speed reduction, provided with mechanical brake. Max. Single Line Pull 7.70kN {785kgf} Max. Single Line Speed 76m/min. (at 4th layer) Wire rope (Diameter x length) 8mm x 56m 8mm x 69m 8mm x 81m 8mm x 93m SWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360 full circle swing on ball bearing slew ring. Automatic swing lock. Speed 2.5 min -1 {rpm} OUTRIGGERS Manually extended sliders hydraulically extended jacks Integral with crane frame Power up down Extended Width Max.: 3.8m, Mid.: 3.0m, Min.: 2.2m HYDRAULIC SYSTEM Control Valves Multiple control valves with integral safety valve STANDARD SAFETY EQUIPMENT AML(Automatic Moment Limiter) <Load indication, Load moment ratio to rated load indication, Warning alarm, Over load limiter> WHL(Working Height Limiter) Load meter Radius indicator Emergency stop switch on radio controller Terminal for emergency stop switch Over-winding alarm Hoisting limiter Jack interlock P.T.O indicator lamp Hook safety latch Hydraulic safety valves, check valves holding valves Level gauge SUITABLE TRUCKS Gross vehicle mass 12,000 to 25,000kg RATED LIFTING CAPACITIES - Empty Chassis Table A Rated Lifting Capacity (kg) 3,130 2,680 2,430 2,030 1,730 1,430 1,3301,180 1, Rated Lifting Capacity (kg) 3,130 2,930 2,430 1,980 1,6801,430 1,180 1,130 1, Rated Lifting Capacity (kg) 2,130 1,980 1,630 1,180 1, Rated Lifting Capacity (kg) 3,130 2,930 2,530 1,930 1,630 1,380 1,130 1, Rated Lifting Capacity (kg) 2,230 1,930 1,580 1, Rated Lifting Capacity (kg) 1,430 1, Table B 3.8 Rated Lifting Capacity (kg) 3,130 2,930 2,480 2,080 1,780 1,580 1,430 1,280 1,130 1, Rated Lifting Capacity (kg) 3,130 2,930 2,430 2,030 1,730 1,480 1,380 1,230 1, Rated Lifting Capacity (kg) 2,130 1,980 1,480 1, Rated Lifting Capacity (kg) 3,130 2,930 2,430 1,980 1,680 1,430 1,330 1,130 1, Rated Lifting Capacity (kg) 2,230 2,180 1,930 1,430 1, Rated Lifting Capacity (kg) 1,430 1,330 1, m/7.21m/.04m boom Rated Lifting Capacity (kg) 3,130 2,930 2,3801,980 1,6801,430 1,2301, Rated Lifting Capacity (kg) 1,980 1,930 1,830 1,380 1, Rated Lifting Capacity (kg) TECHNICAL SPECIFICATIONS NOTE: 1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 60L/min. 2. **No allowance made for boom deflection under laden conditions. RATED LIFTING CAPACITIES NOTE: The mass of hook (30kg), slings all similarly used load hling devices must be added to the mass of the load. Table C 3.8 Rated Lifting Capacity (kg) 3,130 2,930 2,630 2,380 2,130 1,880 1,730 1,530 1,380 1, Rated Lifting Capacity (kg) 3,130 2,930 2,580 2,330 2,030 1,830 1,650 1,480 1,350 1, Rated Lifting Capacity (kg) 2,130 2,030 1,780 1,480 1,200 1, Rated Lifting Capacity (kg) 3,130 2,930 2,530 2,230 1,980 1,730 1,580 1,430 1,250 1, Rated Lifting Capacity (kg) 2,230 2,180 2,030 1,730 1,400 1, Rated Lifting Capacity (kg) 1,430 1,330 1,230 1, m/7.21m/.04m boom Rated Lifting Capacity (kg) 3,130 2,930 2,4802,1801,9301,730 1,530 1,330 1, Rated Lifting Capacity (kg) 1,980 1,9301,8301,580 1,330 1, Rated Lifting Capacity (kg) Table D 3.8 Rated Lifting Capacity (kg) 3,130 2,930 2,630 2,380 2,180 1,980 1,830 1,680 1,530 1, Rated Lifting Capacity (kg) 3,130 2,930 2,580 2,330 2,080 1,930 1,780 1,630 1,480 1, Rated Lifting Capacity (kg) 2,130 2,030 1,780 1,530 1,380 1,200 1,050 1, Rated Lifting Capacity (kg) 3,130 2,930 2,530 2,230 1,980 1,780 1,630 1,480 1,380 1, Rated Lifting Capacity (kg) 2,230 2,180 2,030 1,730 1,430 1,230 1, Rated Lifting Capacity (kg) 1,430 1,330 1,230 1, m/7.21m/.04m boom Rated Lifting Capacity (kg) 3,130 2,9302,480 2,180 1,930 1,730 1,530 1,380 1, Rated Lifting Capacity (kg) 1,980 1,9301,8301,580 1,3301, Rated Lifting Capacity (kg) 530

5 (International Division) 4-12, Kamezawa 2-chome,Sumida-ku Tokyo ,Japan Tel: Fax: Continuing technical development requires Tadano to retain the right to make specifications, equipment price changes without notice. Some specifications are subject to change. ZE500GHRS_ZE500HRS Printed in Japan