Scooptram ST2D. Underground diesel loader with 3.6 tonne load capacity
|
|
- Lionel Morgan
- 5 years ago
- Views:
Transcription
1 Scooptram ST2D Underground diesel loader with 3.6 tonne load capacity 1
2 Hardened loader For small and narrow vein mines A parallel boom design matched to an aggressive bucket configuration provides efficient mucking operations. Three point mounting and anti-skid protection Long life roller bearing center articulation provides safe access for operators and joint provides durable in use. service personnel. The Scooptram ST2D is a reliable loader with simple and strong structure for smaller sized operations that range from narrow vein mines to construction sites. The Scooptram ST2D has benefits from focused on safety, durability and comfort. The worldwide application in a long run of the Scooptram ST2D has been proved great reputation bucket by bucket. ISO ROPS/FOPS approved operator s canopy Side seated operator position for efficient bi-directional operation with wide and clear visibility Boom up lock device Three point mounting and anti-skip protection for safe access for operator and service personnel Main benefits High safety level thanks to features such as ISO ROPS/FOPS approved operator s canopy, boom up lock device, wheel chocks, audio-visual reverse alarm, emergency stop buttons, 3-point contact and anti-skid protection to safe access of operators & service personnel. Conventional and proven components are well protected within the frame Audio-visual reverse alarm provides safety in the work environment Durability thanks to strong frame structure and long life roller bearing center articulation joint with a parallel boom design matching to an aggressive bucket configuration which provides for quick and efficient mucking. Comfort thanks to ergonomic operator seat with seat belt for comfort during a full operating shift. Ergonomic operator seat with seat belt High ground clearance protects the machine from damage 2 3
3 Technical Specifications = Standard = Option Stable structure for long term durability The Scooptram ST2D is designed with strong and longlife structure to provide shorter machine downtime. We actively look for your feedback and take actions on improvement. Specifications Capacities Tamming capacity* Breakout force, hydraulic Breakout force, mechanical kg kg kg Hydraulic system Heavy duty gear type pumps System pressure: 11.4 MPa Hydraulic tank capacity 144 litres Filtration, suction line: 50 μm *Tramming capacity with EOD bucket kg. Manual hydraulic tank fill pump Motion times Steer cylinder: chrome plated stem, mm diameter Boom raising 3.7 sec Hoist cylinder: chrome plated stem, mm diameter Boom lowering 3.7 sec Dump cylinder: chrome plated stem, mm diameter + Safety The Scooptram ST2D is designed to keep a high level of safety. A new designed ISO ROPS/FOPS approved canopy provides safe operation. It can also be installed with Ausal fire suppression system. Dumping Weights (Standard empty vehicle) Approximate weight Axle load, front end Axle load, rear end 4.0 sec kg kg kg Control system Engine data display Audio-visual reverse alarm Monostick steering control Engine Daul lever dump and hoist control Low hydraulic oil level warning + Versatility The Scooptram ST2D is compatible for spring applied hydraulic released (SAHR) brake system, LED lights improves operators' visibility in underground mines. New instrument panel gauge cluster makes operator easily understand the status of machine. Brand/model: Deutz Deutz TCD3.6L4, EPA Tier 3/EU Stage IIIA/ CHINA III Power rating at rpm 74.4 kw / 100 hp Standard: Water cooling, turbo charge, exhaust silencer Fuel Fuel tank capacity: 126 litres Fuel filtration, primary, including water trap: 6 μm Blockout 3rd and 4th gears Blockout 4th Gear Electrical system System voltage: start & accessories, 24 V Mine duty high output alternator: 100 Amps Isolating switch lockout Emergency stop Fuel filtration, secondary: 3 μm Driving lights LED: lumen, 22 W Transmission Main frame + Comfort Side seated operator position for efficient bi-directional operation ensures wide visibility. Ergonomic operator seat with seat belt provides comfort during a full work shift. Modulated power shift, with 4 speeds forward and reverse Brand/model: Dana, R32000 Series Axles Brand/model: Dana, 14D Degree of rear axle oscillation: 16 (8 on each side) Differentials: Front, No spin Differentials: Rear, Standard KA certificate Center hinge and boom up lock device EOD bucket Wheel chocks and chocks brackets Knockdown construction Certral manual lubrication Automatic lubrication system with timer Anti-corrosion cooler Handheld fire extinguisher Ansul manually activated fire suppression system with engine shut down A comprehensive service offering Even the best equipment needs to be serviced regularly to make sure it sustains peak performance. An Epiroc service solution offers peace of mind, maximizing availability and performance throughout the lifetime of your equipment. We focus on safety, productivity and reliability. Brakes Hydraulically applied spring released; fully enclosed wet discs at each wheel end Parking and emergency: spring applied, hydraulically released, multiple wet discs, built into transmission Service brake: LCB Service/parking/emergency brakes: SAHR Tyers Tube tyres design for underground mine service* Tyre size front and rear: R24 (slicks) Tyre size front and rear: R24 (treaded) * As applications and conditions vary, Epiroc recommends that the user consults with tyre suppliers to obtain the optimum tyre selection. Operator's compartment Ansul checkfire automatically activated fire suppression system Dump cylinder rod protector Norilsk compliant BOM - ST2DR (Duetz engine F6L912W) Parts and services Preventive maintenance kits Repair and rebuild kits Upgrade kits Operator training Documentation Operator, service and spare parts manual on CD and hard copy Parts manual - Plasticized Service manual - Plasticized By combining genuine parts and an Epiroc service from our certified technicians, we safeguard your productivity wherever you are. Canopy (ISO ROPS and FOPS approved) Side seated operator for bi-directional operation and maximum visibility Ergonomic operator seat with seat belt External sound level according to ISO 6393 LwA db(a) Sound level in canopy according to ISO 6394 LpA 98.7 db(a) Whole body vibration value m/s² according to EN and ISO
4 Technical specifications Technical specifications Grade performance Standard configuration, empty bucket % Grade Side view Ratio Grade 1:12 1:10 1:8 1:7 1:5 1: st gear km/h 2nd gear rd gear th gear % rolling resistance assumed. Actual performance may vary depending on the application. Grade performance Standard configuration, loaded bucket % Grade ± (H1) Ratio Grade 1:12 1:10 1:8 1:7 1:5 1:4 1st gear nd gear km/h 3rd gear th gear % rolling resistance assumed. Actual performance may vary depending on the application. Measurements 2 112± ± (L1) (T1) Turning radius Dimensions All dimensions shown are based on standard vehicle configuration with 25 mm tyre deflection, unloaded All dimensions are shown in millimetres Top view 38 ± (W) 1 740± (H2) 1 520(T2) Bucket Data STANDARD EOD R2 870 R4 827 STD Volume, nominal heaped (m³) R5 200 Maximum material density (t/m³) Width, bucket (mm) W Tramming position: Axle centerline to bucket lip (mm) T Tramming position: Ground to bucket lip (mm) T Reach dimension (mm) L X45 Raised position: Back height, max. (mm) H Raised position: Bucket tip, height (mm) H
5 Nanjing, China. Legal Notice Copyright 2017, Epiroc (Nanjing) Mining & Construction Equipment Ltd., Nanjing, China. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information. United in performance. Inspired by innovation. Performance unites us, innovation inspires us, and commitment drives us to keep moving forward. Count on Epiroc to deliver the solutions you need to succeed today and the technology to lead tomorrow. epiroc.com
Scooptram ST2G. Underground diesel loader with 4 tonne load capacity
Scooptram ST2G Underground diesel loader with 4 tonne load capacity 1 Popular underground loader The scooptram ST2G is a popular choice for applications varying from mine development, production in small
More informationScooptram ST7 Battery. Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader
Scooptram ST7 Battery Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader 1 Cutting costs and boosting productivity with smart solutions The
More informationMinetruck MT436LP. Underground truck with 32.6-tonne load capacity
Minetruck MT436LP Underground truck with 32.6-tonne load capacity 1 Reliable underground haulage for low seam operations Minetruck MT436LP is an underground truck with a 32.6-metric tonne load capacity.
More informationMinetruck MT431B. Underground articulated truck with 28.1-metric tonne load capacity
Minetruck MT431B Underground articulated truck with 28.1-metric tonne load capacity 1 Reliable underground haulage Minetruck MT431B is a high speed, articulated underground truck, featuring state-of-the-art
More informationScooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity 1 Superior underground mucking The Scooptram ST14 is full with features that makes it powerful and yet fuel efficient and the thorough improvements
More informationMINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity
MINETRUCK MT431B Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B RELIABLE UNDERGROUND HAULAGE THE MINETRUCK MT431B IS AN ARTICULATED UNDERGROUND TRUCK WITH A 28.1-METRIC
More informationScooptram ST7. Underground small size loader with 6.8-tonne capacity
Scooptram ST7 Underground small size loader with 6.8-tonne capacity 1 The latest technology in narrow vein mining The Scooptram ST7 is a robust loader which is built for demanding underground applications
More informationScooptram EST1030. Electric underground loader with 10-tonne capacity
Scooptram EST1030 Electric underground loader with 10-tonne capacity 1 Electrically powered to save energy, time and money The Scooptram EST1030 is a fast, electrically powered loader with a 10 tonne capacity
More informationMINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity
MINETRUCK MT2010 Underground articulated truck with 20-tonne load capacity MINETRUCK MT 2010 COMPACT AND QUICK FOR EFFICIENT HAULAGE MT2010 IS AND ARTICULATED UNDERGROUND TRUCK WITH A LOAD CAPACITY OF
More informationScooptram ST7LP. Low-profile underground loader with 6.8-tonne capacity
Scooptram ST7LP Low-profile underground loader with 6.8-tonne capacity 1 Superior productivity in low seam applications The low-profile Scooptram ST7LP with a back height of only 1.6 M is a robust underground
More informationSCOOPTRAM ST7 BATTERY
SCOOPTRAM ST7 BATTERY Power Unleashed Delivering unparalleled productivity, Scooptram is the most reliable underground loader on the market. The New Scooptram ST7 is fully battery powered and fully automation
More informationMINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity
MINETRUCK MT5020 Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 FAST, EFFICIENT UNDERGROUND HAULAGE MT5020 IS AN ARTICULATED UNDERGROUND TRUCK WITH 50 METRIC TONNES LOAD CAPACITY.
More informationSCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity
SCOOPTRAM EST1030 Electric underground loader with 10-tonne capacity ELECTRICALLY POWERED TO SAVE ENERGY, TIME AND MONEY THE SCOOPTRAM EST1030 IS A FAST, ELECTRICALLY POWERED LOADER WITH A 10 -TONNE CAPACITY
More informationSCOOPTRAM ST7. Underground, small size loader with 6.8-tonne capacity
SCOOPTRAM ST7 Underground, small size loader with 6.8-tonne capacity SCOOPTRAM ST7 THE LATEST TECHNOLOGY IN NARROW VEIN MINING THE SCOOPTRAM ST7 IS A ROBUST LOADER THAT IS BUILT FOR DEMANDING UNDERGROUND
More informationMinetruck MT42. Underground truck with 42-tonne load capacity
Minetruck MT42 Underground truck with 42-tonne load capacity 1 Superior underground haulage Minetruck MT42 is a high speed, 42-metric tonne articulated underground truck, featuring state-of-the-art levels
More informationScooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity Scooptram ST14 Superior underground mucking The new Scooptram ST14 is full with new features that makes it more powerful and yet more fuel efficient.
More informationMINETRUCK MT42. Underground truck with 42-tonne load capacity
MINETRUCK MT42 Underground truck with 42-tonne load capacity MINETRUCK MT42 SUPERIOR UNDERGROUND HAULAGE THE MINETRUCK MT42 IS A HIGH SPEED, 42-TONNE ARTICULATED UNDERGROUND TRUCK, FEATURING STATE-OF-THE-ART
More informationMinetruck MT2200. Articulated underground truck with 22-tonne load capacity
Minetruck MT2200 Articulated underground truck with 22-tonne load capacity 1 Productive and reliable operations Minetruck MT2200 is a high-capacity truck built for fast, efficient underground haulage.
More informationBoomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2
Boomer 281 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationBoomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²
Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein
More informationMinetruck MT54. Underground truck with a load capacity of 54 metric tonnes
Minetruck MT54 Underground truck with a load capacity of 54 metric tonnes 1 Productive high capacity underground haulage Minetruck MT54 is a high-capacity underground truck in a compact design, engineered
More informationSimba K102 production drill rig. Hydraulic production drill rig for long-hole mining
Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift
More informationBoomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2
Boomer 281-15 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationMINETRUCK MT65. Underground truck with 65-tonne load capacity
MINETRUCK MT65 Underground truck with 65-tonne load capacity MINETRUCK MT65 EFFICIENT UNDERGROUND HAULAGE ENGINEERED WITH SAFETY, PRODUCTIVITY AND OPERATOR COMFORT IN MIND FOR HAULAGE IN LARGER UNDERGROUND
More informationMinetruck MT65. Underground truck with 65-tonne load capacity
Minetruck MT65 Underground truck with 65-tonne load capacity Minetruck MT65 Efficient underground haulage Engineered with safety, productivity and operator comfort in mind for haulage in larger underground
More informationBoltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions
Boltec S Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions 1 Making mining safe Boltec S is a fully mechanized rock bolting rig suitable
More informationBoomer XL3 D face drilling rig
Boomer XL3 D face drilling rig Three-boom tunneling drill rig for large sized underground tunnels and cross sections, with maximum coverage area 178 m 2 1 A giant of high penetration Boomer XL3 D is a
More informationBoomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²
Boomer L2 Hydraulically controlled face drilling rig with a coverage area up to 104 m² 1 Fast and efficient face drilling The Boomer L2 is a powerful hydraulically controlled face drilling rig for mining
More informationBoltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters
Boltec E Fully mechanized rock bolting rig for bolt lengths from 2.4-6 meters, effective in roof heights up to 13 meters 1 Making mining safe Boltec E is a fully mechanized rock bolting rig suitable for
More informationBoltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters
Boltec M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m and heights up to 9.5 meters 1 Making mining safe A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 meters.
More informationSANDVIK LH202 NARROW VEIN LOADER
SANDVIK LH202 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Sandvik LH202
More informationPowerROC D55 Surface drill rig for mining, aggregate quarries, and construction
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction Hole diameter: 90 165 mm (39/₁₆" 6½") 1 Power up your performance The PowerROC D55 is designed according to our philosophy
More informationMinetruck MT54. Underground truck with a load capacity of 54 metric tonnes
Minetruck MT54 Underground truck with a load capacity of 54 metric tonnes Minetruck MT54 Productive underground haulage Minetruck MT54 is a high-capacity underground truck in a compact design, engineered
More informationSimba S7. Rugged rig with smart design and increased automation made for tight, tough conditions
Simba S7 Rugged rig with smart design and increased automation made for tight, tough conditions 1 Flexibility, versatility and reliability Maximize productivity in small spaces with the Simba S7. This
More informationSandvik LH307 Technical Specification
Technical Specification APPLICATIONS is a 6,7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development work, mining and tunnelling construction.
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system 1 The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationBoomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs
More informationSandvik LH203 Technical Specification
2014-01-16 Technical Specification APPLICATIONS is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Capacities Tramming capacity 3 500
More informationSANDVIK LH208L LOW PROFILE LOADER
SANDVIK LH208L LOW PROFILE LOADER TECHNICAL SPECIFICATION Sandvik LH208L is a 7.7 tonnes capacity underground low-profile LHD designed to work in low profile room and pillar mining and extra low profile
More informationPowerROC T25 DC Surface drill rig for drill site construction civil engineering, small aggregate and limestone quarrying.
PowerROC T25 DC Surface drill rig for drill site construction, civil engineering, small aggregate and limestone quarrying. Hole diameter: 51 89 mm (2" 3½") 1 Your way to success The PowerROC T25 DC uses
More informationBoomer S2. Robust face drilling rig with a coverage area up to 56 m 2
Boomer S2 Robust face drilling rig with a coverage area up to 56 m 2 1 Robust performace in a small package The Boomer S2 is our smallest mining and tunneling rig with intelligent control, now tougher
More informationBoomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2
Boomer E1-DH Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2 1 For power and productivity The Boomer E1-DH rig has extensive coverage areas of
More informationPowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking
More informationSANDVIK LH204 UNDERGROUND LOADER
UNDERGROUND LOADER Sandvik LH204 is designed to give maximum tramming capacity in narrow mining and tunneling applications. The hydrostatic drive system delivers high tractive effort for maximum penetration
More informationSandvik TH430 Technical Specification
Technical Specification APPLICATIONS The is a true 30 metric tonne articulated mine dump truck that will fit in a 4 x 4 m envelope. The TH430 is equipped with a standard, fully enclosed, vibration isolated,
More informationSANDVIK TH320 UNDERGROUND TRUCK
SANDVIK TH320 UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH320 is a narrow 20 metric tonne hauler that fits in a 3 x 3 meter heading. Available with a standard forward facing, open operators
More informationPowerROC T35. Surface drill rig for construction and quarrying Hole diameter: mm (2½" 4½")
PowerROC T35 Surface drill rig for construction and quarrying Hole diameter: 64 115 mm (2½" 4½") 1 Power and performance Epiroc s PowerROC rigs truly live up to their names with enough muscles for tough
More informationFlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
More informationSandvik TH663 Technical Specification
Spec. number TH663-04 Technical Specification APPLICATIONS The is a high productivity 63 tonne articulated underground dump truck for use in 6 x 6 meter haulage ways. Operator safety, health and comfort
More informationFlexiROC T35 & T40 Surface drill rigs for quarrying and construction
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 hole diameter: 64 115 mm (2.5 4.5 ) FlexiROC T40 hole diameter: 64 127 mm (2.5 5 ) Flexible rigs for all occasions For
More informationFlexiROC T20 R A drill rig for surface- and underground construction
FlexiROC T20 R A drill rig for surface- and underground construction Hole diameter: 38 64 mm (1.5 2.5 ) Multi-purpose without compromise The FlexiROC T20 R (MK II) is the construction contractor s new
More informationSpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry.
SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry. Hole diameter: 70 105 mm (2.75" 4.25") Speed up your profits SpeedROC D30 is a versatile and flexible
More informationBoomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²
Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1 Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece
More informationEJC 430 TECHNICAL SPECIFICATION. Payload: 30 tons (27.3 tonnes) Dump box volume: 20.7 yd³ (15.3 m³) We are an ISO 9001 Registered Company EJC 430 1
EJC 430 1 EJC 430 TECHNICAL SPECIFICATION Payload: 30 tons (27.3 tonnes) Dump box volume:.7 yd³ (.3 m³) 02, EJC Loaders Division reserves the right to change this 2 EJC 430 General Arrangement 65 o 430
More informationPowerROC T45. Surface drill rig for quarrying and construction Hole diameter: mm( (3" 5")
Surface drill rig for quarrying and construction Hole diameter: 76 127 ( (3" 5") 1 Power built in The gives you high reliability and power worthy its name. Thanks to its compact structure and high manoeuvrability,
More informationSandvik TH320. General Arrangement
Technical Specification TH3-Revision 1 1/10 General Arrangement 65 96 in (2438) 179 in (4547) TH3 13 TH3 90 in (2286) 12 in (305) 54 in (1372) 358 in (9093) 174 in (44) 83 in (2108) 13 in (330) 87 in (2210)
More informationSandvik TH551 Technical Specification
Spec. number TH551-05 2014-08-14 Technical Specification APPLICATIONS The is a high performance 51 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health
More informationFlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction
FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction Folding boom hole diameter: 38 64 mm (1½ 2½ ) Improve your speed and accuracy The FlexiROC T25 R construction edition
More informationBOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2
BOOMER T Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 PRIME PERFORMANCE PACKED INTO A SMALL, VERSITILE UNIT THE BOOMER T1 D IS AN IDEAL RIG FOR NARROW VEIN
More informationSpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry.
SpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry. Wire speed: 0 45 m/s (0 148 ft/s) The fastest cutting machine SpeedCut, the fastest diamond
More informationFlexiROC D60/D65 Surface drill rig for quarrying and construction
FlexiROC D60/D65 Surface drill rig for quarrying and construction FlexiROC D60 hole diameter: 110 178 mm (4.3" 7") FlexiROC D65 hole diameter: 110 203 mm (4.3" 8") A rig you can rely on The FlexiROC D60
More informationBoomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²
Boomer E1/E2 series Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² 1 For power and productivity The Boomer E1 and Boomer E2 rigs have extensive coverage
More informationPowerROC T30 E Surface drill rig for quarrying and construction
PowerROC T30 E Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (3.5 5.5 ) Stronger than ever With a robust engine and a reach of 4.3 meters the PowerROC T30 E takes your performance
More informationSANDVIK LH514E MASS MINING LOADERS
SANDVIK LH514E MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH514E is a high capacity electric Load-Haul- Dump (LHD) developed specially for underground use. It emits very low noise and no exhaust
More informationFlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Extend your reach and versatility The FlexiROC T30 R Construction Edition is a tophammer
More informationRobbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
More informationBOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2
BOOMER S Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 w GROUND-BREAKING PRODUCTIVE DRILLING THE BOOMER S1 IS A FACE DRILLING RIG FOR MINING AND TUNNELLING.
More informationFlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Pioneering productivity The FlexiROC T30 R quarry edition is a tophammer rig designed
More informationSmartROC CL Surface drill rig for open pit mining and selective mining
SmartROC CL Surface drill rig for open pit mining and selective mining Hole diameter: 115 216 mm (4.5 8.5 ) The SmartROC CL is built to beat the rock The fuel-efficient SmartROC CL is one of the most powerful
More informationUnigrout Flex S and Flex M. The flexible grouting system to reinforce both underground and on surface construction
Unigrout and The flexible grouting system to reinforce both underground and on surface construction 1 A flexible grouting system Quick and easy to move, the complete Unigrout and system consists of a manually
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationHeight of safety canopy Height of dump box. Dumping angle 65. Standard box volume 10.2 m³ Dump box volume (SAE) m³
The Sandvik TH320 is a narrow 20 metric tonne hauler that fits in a 3 x 3 metre heading. Available with a standard forward facing, open operators compartment or an optional forward facing, fully enclosed
More informationSmartROC D50 and D55 DTH surface drill rig for quarrying and mining
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power
More informationSANDVIK TH540 UNDERGROUND TRUCK
SANDVIK TH540 UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH540 is a high performance 40 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health
More informationEJC EJC 522. Technical Specification. Payload: 20 tonnes (22 tons) Dump box volume (SAE): 10.2 m³ (13.4 yd³) ISO 9001:2000 FM 62442
EJC 522 1 EJC 522 Technical Specification Payload: tonnes (22 tons) Dump box volume (SAE):.2 m³ (13.4 yd³) 2 EJC 522 General Arrangement 65 83 96 in (2438) 90 in (2286) 179 in (4547) 13 358 in (9093) 174
More informationPrecise and flexible production drilling
Simba E7-series Hydraulic long-hole production drill rig for medium to large size drifts, with excellent coverage area and hole range from 51 to 178 mm 1 Precise and flexible production drilling The drill
More informationEJC 30SX 1 EJC 30SX. Technical Specification. Payload: 33 tons (30 tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) ISO 9001:2000 FM 62442
EJC SX 1 EJC SX Technical Specification Payload: 33 tons ( tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) 2 EJC SX General Arrangement 65 2 in (2591) 96 in (2438) 96 in (2438) 195 in (4953) 13 358 in
More informationSANDVIK LH307 NARROW VEIN LOADER
SANDVIK LH307 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH307 is a 6.7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development
More informationExplorac 100 Reverse circulation drill rig for exploration drilling
Explorac 100 Reverse circulation drill rig for exploration drilling Hole diameter: 127 165 mm (5" 6.5") Fast and accurate Reverse circulation (RC) drilling represents a fast and economical way to retrieve
More informationSimba M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter
Simba M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 Compact and powerful long-hole drilling solution The sturdy Simba M4 is a
More informationR1300G II Underground Mining Loader. Name Venue Date
R1300G II Underground Mining Loader Name Venue Date Machine Specifications Gross Power SAE 136 kw (182 hp) @ 2200 RPM Engine Model CAT C6.6 ACERT Speeds Forward kph mph 1st 5.3 3.2 2nd 10.1 6.2 3rd 18.1
More informationSANDVIK LH514 MASS MINING LOADERS
SANDVIK LH514 MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH514 is a high capacity Load-Haul-Dump (LHD) developed specially for underground use. By combining smart geometry with powerful thrust,
More informationHigh precision solution
Simba M6 Hydraulic production drill rig with I-beam mounted drilling unit for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 High precision solution The sturdy Simba
More informationSmartROC T45 Surface drill rig for quarrying and construction
SmartROC T45 Surface drill rig for quarrying and construction Folding boom hole diameter: 89 127 mm (3,5" 5") Standard boom hole diameter: 89 140 mm (3,5" 5,5") Smart and precise efficiency With the SmartROC
More informationTIER 3. W130C 4.4 ton m t/h 12.5 ton 172 hp
TIER 3 STANDARD BUCKET PAYLOAD BUCKET VOLUME PRODUCTIVITY (50 m DISTANCE) OPERATING WEIGHT MAX GROSS POWER W130C 4.4 ton 2.1-5 m 3 227 t/h 12.5 ton 172 hp THE MAIN COMPONENTS OF OUR W 3 1 2 2 1 MULTIPLE
More informationBoomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
Boomer E3/E4 series Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² 1 For power and productivity Face drill rigs in the Boomer E3 and E4 series have
More informationEJC 65 UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) TECHNICAL SPECIFICATION 1-3
1-3 EJC 65 TECHNICAL SPECIFICATION UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) 1-4 EJC 65 Main Dimensions 65 EJC 65 1-5 SANDVIK TAMROCK EJC Loaders Division EJC 65 Specification Sheet January 1, 2000
More informationRBH65 BACKHOE LOADER
RBH65 BACKHOE LOADER Shift productivity into a higher gear. 1 2 3 Whether you're digging, trenching, back-filling or handling material, we have a Rhino Backhoe Loader to meet your needs. Rhino Backhoe
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More informationBOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters
BOLTEC M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m heights up to 9.5 meters BOLTEC M MAKING MINING SAFE A FULLY MECHANIZED ROCK BOLTING RIG FOR BOLT LENGTHS FROM 1.5-3.5 METERS.
More informationDiamec Smart 6 Core drilling rig
Diamec Smart 6 Core drilling rig Hole diameter: A, B, N and H Designed to perform Epiroc's advanced Rig Control System means the Diamec Smart 6 operates automatically. Drilling functions are easily performed
More informationSANDVIK LH517 MASS MINING LOADERS
SANDVIK LH517 MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH517 is a high capacity Load-Haul-Dump (LHD) featuring excellent safety, productivity and reliability. It has a unique fast and efficient
More informationigh-performance, low environmental impact diesel engine: quiet, low emissions, economical fuel consumption.
VOLVO WHEEL LOADER L50F ross Power : G SAE J19 = 87 kw/ 117 hp N et Power : SAE J1349 = 85 kw/ 115 hp O perating Weight : 9.4 9.9 t B ucket Capacities : 1.4 2.5 m3 igh-performance, low environmental impact
More informationDRIVE-TO-TREE FELLER BUNCHERS SPEND A LARGE PART OF THE TOTAL DUTY CYCLE DRIVING TO THE NEXT TREE OR TO AND FROM THE BUNCH PILE.
D R I V E -T O -T R E E F E L L E R B U N C H E R S THE 718E TIGERCAT DRIVE-TO-TREE FELLER BUNCHERS LEAD THE INDUSTRY IN PRODUCTIVITY, RELIABILITY AND DURABILITY. The lowest cost per tonne harvesting solutions
More informationFLSERIES - LP12. Fuel Lube Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground fuel lubrication vehicle.
FLSERIES - LP12 Fuel Lube Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 27,000 lb (12,273 kg) 27-2 (8.3 m) 7-0 (2.13 m) Tramming Height Carrier Articulation
More information534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp)
534E LA LANDFILL COMPACTOR Net Horsepower 169 kw (227 hp) Compaction ratio 1 : 3.5 Operating Weight - w/ blade 22 900 kg (50,485 lb) - w/ bucket 24 200 kg (53,351 lb) The best in the business for productivity
More informationEJC 430 READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC 430 WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK
EJC READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK POWERED WITH A DETROIT SERIES ENGINE MILITARY SPECIFICATION WIRING WILLIAMS OPERATING SPECIFICATION
More informationEngine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged,
SK/SK TC Engine SK SK TC Manufacturer and Model John Deere PowerTech TM E HT7 turbocharged, standard John Deere PowerTech E HT6 turbocharged, standard Non-Road Emissions Standard EPA Interim Tier /EU Stage
More informationSmartROC C50 Surface drill rig for quarrying, mining and construction
SmartROC C50 Surface drill rig for quarrying, mining and construction Hole diameter: 90 140 mm (3.5 5.5") 1 Speed, power and precision The SmartROC C50 from Epiroc gives you the best of both worlds. The
More information385B SKID STEER LOADER
Engine Yanmar 4TNV98CT Tier 4 Final Gross Power 72 hp (53.7 kw) Operating Weight 8,250 lbs (3,750 kg) Bucket Capacity 0.66 yd 3 (0.5 m 3 ) 385B SKID STEER LOADER 385B SKID STEER LOADER YANMAR ENGINE Unmatched
More information