MONACO LOCK COMPANY, INC. TEL (800) FAX (800)

Transcription

1 Standard Strike Plate (Old # ) D " Spacer, Door Thickness " (13 mm) floating front throw latch 2 3 4" (70 mm) backset D Cylindrical Drive Unit Assembly (Includes: , , , , , , , , ) D Thread Ring (Old # ) D Back Plate Assembly (Includes: , , , ) (Not shown in Exploded View) D Shoe Retainer and Bridge Assembly See individual components for photo presentation. Screw Pack Includes (1) , (2) , (4) , (4) , (4) , (1) , (4) ,(1) , (Not shown in Exploded View) D-11 pack 85 Shoe Retainer Cap Assembly D Accessory Kits (For lock installation) (Not shown in Exploded View) D-11 TEL (800) FAX (800)

2 UNI-LUB Use for arctic applications Includes one 4oz. (118 ml) squeeze bottle of moisture-repellant anti-freeze lubricant, and one 4oz. (118 ml) squeeze bottle of light-consistency grease (temperature range -40 to 140 ) per/set 3 4" (19mm) brass latch carries 3-hour 2 3 4" (70 mm) backset. Beveled front D " (19 mm) flat front latch carries 3-hour 2 3 4" (70 mm) backset D-01 ASA Roller Strike (For 4 7 8" (105 mm) long cutout) ( ) ( ) D-01 ( D) Best equivalent Removable Core Cylinder D-01 (Sold International Only - Not available for U.S.) Filler Plate " (267 mm) ( ) ( ) D-41 ( D) Filler Plate 15" (381 mm) ( ) ( ) D-41 ( D) ASA Strike (For 47 8" (105 mm) long cutout) (Old # ) ( ) ( ) D-01 ( D) Dominion Lock Removable Core Cylinder D " (13 mm) brass latch carries 3-hour 2 3 4" (70 mm) backset. Floating front. (Old # 55071) / D-01 Anti-spy Shield ( ) Black only Sargent Conversion Assembly (R) D-01 Schlage Conversion Assembly (S) D-01 Corbin / Russwin Conversion Assembly (C) D-01 Dominion Lock Conversion Assembly (DL) D-01 Best / Falcon / Arrow / Eagle / KSP / Lloyd Matheson Conversion Assembly (B) D-01 Assa Conversion Assembly (A) D-01 Medeco / Yale Conversion Assembly Request spacer for 5-pin Medeco. (M) D-01 Conversion Assemblies Use the following conversion assemblies to convert an existing 1000 Series lock from standard to key override. Removable core cylinders not included. Dominion Lock & Best equivalent core is available- see above. 294 TEL (800) FAX (800)

3 Key Override Models: ASSA Medeco/Yale Schlage Key Override Models: Best & Equivalent Corbin/Russwin Sargent TEL (800) FAX (800)

4 Parts Included in Kit Chamber Shaft Bushing Clutch Assembly Combination Chamber Drive Shaft (No Key Override) Drive Shaft 1 3 8" (No Key Override) Drive Shaft (key Override) Drive Shaft 1 3 8" (key override) Extension Spring Fixed Sleeve Stop Plate Left Hand: Right Hand: Left Hand Kit Shown 296 TEL (800) FAX (800)

5 1 Combination Chamber (M-63/M-56) (old # ) Front Knob Retainer Clip Pushbuttons Black Silver 12 Combination Change Sleeve Washer (For combination change) Bushing, Shaft 13 Shoe Spring (For Cylindrical Drive Unit) Spring Nut Key DF-5 (For Passage Set with keyed control) pack of 2 5 Cover for Shoe Housing Shaft Self-Aligning Bushing (For Models 1021 & 1041) Installation Wrench (spanner wrench) Retainer Ring 3 8" I.D. (For Passage Set & Combination Change Sleeve) Strike Box Screw Stud 1 4" - 20 x 1 7 8" (For combination change plug assembly) Key DF-59 (For Combination Change Control) Screw, 8-32 x 2 1 2" (For Mounting) pack of 2 9 Combination Change Stud Sems Screw, Phillips 6-32 x 1 4" R.H.M.S. (For Shoe Housing Cover) Combination Change Sleeve Sems Screw, Phillips 8-32 x 7 16" R.H.M.S. (For Spacer) TEL (800) FAX (800)

6 21 Sems Screw, Phillips 8-32 x 5 16" R.H.M.S (For Spacer) Inside Lever Coil Return Spring Combination Screw, Phillips 8-32 x 3 4" (For latch and strike plate) D Inside Lever Fixed Sleeve Retainer Clip Rubber Bumper (For Door Frame) (Self Adhesive Strip of 4) Unified Trim Plate - Standard / D Spacer for Medeco 5 pin 34 Reinforcing Plate Front Lock Housing 35 Spring Clip (For passage set) D Clutch Backing Plate 36 Unified Trim Plate - Passage Set Model D Double Wave Spring 37 Pin Linkage Cancelling Guide Bracket 38 Outside Lever Extension Return Spring Retractor Shoe 39 Linkage Pin Inside Lever Fixed Sleeve Balance Spring * When ordering a fixed sleeve for older locks, it may be necessary to order a shoe retainer cap. 298 TEL (800) FAX (800)

7 41 Outside Lever Handle Assembly Non Key Override* D D Plug Assembly (For passage set with thumbturn) D Non Key override 52 Drive Shaft Assembly (Standard) (Includes: & ) Stop Plate Assembly Drive Shaft Assembly (Key Override) (Includes: & ) Clutch cover assembly Plug Assembly (For passage set with (2) DF5 keys) (Includes: ) D Inside Drive Sleeve Assembly Includes Inside Sleeve and Inside Knob Retainer Plug 55 Chamber Release Cam (For Passage Set) Inside Lever Assembly D D-01 (Includes , (Includes , , , , , ) ) Chamber Release (For Passage Set) Combination Change Plug Assembly with (2) DF59 keys (Includes , & ) D (For Schlage Removable Core) D D Clutch Assembly ( & ) (For Sargent Removable Core) (For Best / Falcon / Arrow / Eagle & KSP / Lloyd Matheson Removable Core) D D (For Corbin/Russwin Removable Core) (For Best / Falcon / Arrow / Eagle & KSP / Lloyd Matheson Removable Core) (For Schlage Removable Core) * When ordering an outside lever assembly for older locks, it may be necessary to order a respective outside drive sleeve assembly. TEL (800) FAX (800)

8 61 (For Medeco/Yale Removable Core) Latch extension assembly to convert to 3 3 4"(10 cm) backset (For Sargent Removable Core) D D Latch extension assembly to convert to 5"(13 cm) backset (For Medeco Removable Core) D D Clip (For Clutch Link) (Old # ) (For Corbin/Russwin Removable Core) D D Inside Knob Retainer Clip (Old # ) Sems Screw, Phillips 6-32 x 7 16" (11 mm) R.H.M.S. (For Clutch Cover Clutch Backing Plate and Guide Bracket) (Old # ) 75 Sems Screw, Phillips 8-32 x 5 16" R.H.M.S. (For Spacer) (Old # ) Sems Screw, Phillips 6-32 x 5 16" (8 mm) 76 R.H.M.S. (For Comb. Chamber) (Old # ) Cross pin.100" (2.5 mm) x.500 (1.27 mm) Screw Phillips 6-32 x 3 8" F.H.M.S. (For Back Plate) (old #) Standard Strike Plate (Old # ) D (For Assa Removable Core) D D " (13 mm) Floating face front throw latch; 2 3 4" (70 mm) backset D (For Assa Removable Core) Thread Ring D Drive Insert 80 Cross Pins 0.100" diameter x 0.460" long * When ordering an outside lever assembly for older locks, it may be necessary to order a respective outside drive sleeve assembly. 300 TEL (800) FAX (800)

9 81 Shoe Retainer and Bridge Assembly 85 Back Plate Assembly (Includes: , , , ) D D Shoe Retainer Cap Assembly D See individual components for photo presentation Screw Pack Includes (1) , (2) ,(4) , (4) , (1) , (4) , (1) D " Spacer, Door Thickness Accessory Kit (For Lock Installation) (Not shown in Exploded View) D Cyllindrical Drive Unit Assembly (Includes: , , , , , , , , , ) D-01 * When ordering an outside lever assembly for older locks, it may be necessary to order a respective outside drive sleeve assembly. TEL (800) FAX (800)

10 UNI-LUB Use for arctic applications Includes one 4oz. (118 ml) squeeze bottle of moisture-repellant anti-freeze lubricant, and one 4oz. (118 ml) squeeze bottle of light-consistency grease (temperature range -40 to 140 ) per set 3 4" (19mm) brass latch carries 3-hour 2 3 4" (70 mm) backset. Beveled front D " (19 mm) flat front latch carries 3-hour 2 3 4"(70 mm) backset D-01 ASA Roller Strike (For 4 7 8" (105 mm) long cutout) ( ) ( ) D-01 ( D) Best Equivalent Removable Core Cylinder D-01 (Sold international only, not available for U.S.) Filler Plate " (267 mm) ( ) ( ) D-41 ( D) Filler Plate 15" (381 mm) ( ) ( ) D-41 ( D) 3 4" (19 mm) brass latch carries 3-hour 2 3 4" (70 mm) backset. Beveled front. (For L1076 privacy Model only) / D-01 Anti-spy Shield ( ) Black only ASA Strike (For 47 8"(105 mm) long cutout) (Old # ) ( ) ( ) D-01 ( D) Schlage Conversion Assembly (S) D D-01 Sargent Conversion Assembly (R) D D-01 Medeco / Yale Conversion Assembly Request spacer for 5-pin Medeco. (M) D D " (13 mm) brass latch carries 3-hour 2 3 4" (70 mm) backset. Beveled front. (old # 55071) / D-01 Best / Falcon / Arrow / Eagle / KSP / Lloyd Matheson Conversion Assembly (B) D D-01 Corbin / Russwin Conversion Assembly (C) D D-01 Assa Conversion Assembly (A) D D-41 Conversion Assemblies Use the following conversion assemblies to convert an existing L1000 Series lock from standard to key override. Removable core cylinders not included. Dominion Lock and Best Equivalent core is available - see above. 302 TEL (800) FAX (800)