RAISEBORING DRILL PIPES

Transcription

1 Secoroc Rock Drilling Tools RAISEBORING DRILL PIPES Catalogue

2 Introducing Raiseboring drill string components Atlas Copco Secoroc has a long history in Raiseboring that finds its roots in the Robbins Raiseboring Company, Ingersoll Rand Raiseboring and BHMT. Now introducing a full product offering from the Raiseboring machine, through the Raiseboring consumables, including the Raisebore drillstring. Atlas Copco Raiseboring Drillstring components are designed for each individual Raiseboring machine. Many of these machines are Robbins or IR machines designed and manufactured by Atlas Copco. Atlas Copco Secoroc Raiseboring Drillstring components are designed for durability and economy. To complement the design and manufacture of their Raiseboring Drill components, Atlas Copco has worldwide coverage, with service just a phone call away. With Atlas Copco comes constant product improvements along with the backing of Atlas Copco and the peace of mind that comes with it.

3 Raiseboring Drill Pipe Atlas Copco Secoroc Raiseboring Drill Pipes are designed and manufactured for fatigue resistance with the use of a radiused root thread instead of the industry standard flat bottom root thread design. Difference between the radiused root thread (right) and the standard thread (left). In addition, the use of shot peening in critical areas also improves the fatigue life of the pipe and other components. The combination of the radiused root thread and the shot peening of critical areas is a step above the industry standard. See the attached table for our standard offering. Shot peened areas highlighted in red. Shot peening illustration

4 A Complete Raiseboring System Raiseboring Drill Pipe Features & Benefits Features: Atlas Copco supplies the entire raiseboring offering Benefits: One stop shop DI22 with radius root thread profile Improved thread fatigue life Shot peening threads and wrench flats Standard strength & High strength material offering Improved crack resistance Wide product offering assortment Reference terms OD HS S/S FW ID ID1 ID2 GC NRS Outer diameter / Nominal pipe size Hole size / Pilot bit size Shoulder to Shoulder / length Flat to Flat / Wrench measurement Flat width Inside diameter Inside diameter / Small bore - Stepped ID Inside diameter / Large boreback - Stepped ID Gripper clearance / Rig Requirements Non-rotating stabilizer

5 Drill Pipe product offering: Catalog Code R R2AA-BB,01-82 OD S/S Strength Connection* Weight FW in mm in mm lbs kg in mm in mm 29-1/ R R2AA-BB, Standard 6-3/4 DI R R2AA-BB, R R4AB-DB, Standard R R4AB-DB, Standard R R4AB-DB, Standard 8-1/4 DI R R4AB-DB, Standard R R4AW-DB, High R R7A0-FB, /2 749 Standard 9-1/4 DI22-S R R6AC-FB, / Standard 9-1/4 DI R R6AW-FB, High 9-1/4 DI R R9AD-HB, /8 327 High 10-1/2 DI R R9AD-HB, / / / R R8BF-HB, / / High 10-1/8 DI R R8BF-IB, / Other wrench configurations are available upon request. *Connection for Pin & Box ID1: 4-3/4" for 8" & 10" Drill Pipe and 5-716" for all larger sizes ID2: 6" for 8" Drill Pipe ID2 ID1 FW 7" for 11" O.D. Drill Pipe 8" for 11-1/4" O.D. Drill Pipe OD 9" for all larger sizes listed S/S

6 Rib Stabilizer product offering: Catalog Code R-R2C-R B1H-AA,15 OD HS S/S Connection* ID GC in mm in mm in mm in mm in mm in mm / R-R2C-R B1H-AA, /4 DI / R-R2C-R B1H-AJ, / R-R2D-R B1H-AA,15 9-7/ R-R4F-R D1H-AB, R-R4F-R D1H-AJ, /4 DI / / R-R4F-R D1H-AW, R-R7I-R F1H-AO, / /4 DI22-S 5-7/ / R-R6I-R F1H-AC, / / /4 DI / R-R6I-R F1H-AC, /4 DI / R-R9J-R H1H-AD, / R-R9J-R H1H-AD, / / /2 DI / R-R9L-R H1H-AD, / R-R8K-R I1H-AE, / / R-R8M-R I1H-BF, /8 DI / / /2 268 Other wrench configurations are available upon request See Drill Pipe chart for additional wrenching detail by referencing the OD size All the listed Rib Stabilizers are manufactured using High Strength material *Connection for Pin & Box HS ID OD GC S/S

7 Roller Stabilizer product offering: Catalog Code OD HS S/S Connection Weight (kg) Float Valve* in mm in mm in mm Pin Box in mm R-17C-R B1A-AA, / /2 API-Reg R-17C-R B1A-AJ, /2 API-Reg /4 DI R-17C-R B1A-AA, /2 API-Reg R-18D-R B1A-AA,82 9-7/ /8 API-Reg R-18F-R D1A-AJ, / R-18F-R D1A-AJ, /4 DI /8 API-Reg R-18F-R D1A-AW, R-18I-R F1A-AO, / / /4 DI /8 API-Reg R-18I-R F1A-AC, R-18J-R H1B-AD, / /8 API-Reg / /2 DI-22 TBA TBA /8 API-Reg TBA 334 4R R R F-6R TBA TBA 13-1/ /8 DI /8 API-Reg TBA 5F-6R 10-1/2 268 Other wrench configurations are available upon request. See Drill Pipe chart for additional wrenching detail by referencing the OD size *Part is machined to accept a Float Valve but it is not included. HS FF OD S/S

8 Starter Pipes & Subs: 8" Nominal Size - 8.5" Pipe / Bushing Size Catalog Code Type S/S 10" Nominal Size - 9.5" Pipe / Bushing Size Connection R-17C-R B2E-AA,82 Sub /2 API-Reg R R2AA-BD,02-82 Pipe /4 DI R-17C-R B2E-AA,82 Sub /2 API-Reg R-17C-R B1E-AA,82 Sub 29-1/2 4-1/2 API-Reg R R2AA-BC,01-82 Pipe 29-1/2 6-3/4 DI R R2AA-BC,02-82 Pipe /4 DI R-17C-R B10E-AJ,82 Sub /2 API-Reg R R2AJ-BC,10-82 Pipe /4 DI R R2AA-BC,11-82 Pipe /4 DI-22 Catalog Code Type S/S Box Connection R-18E-R D2E-AB,82 Sub /8 API-Reg R R4AW-DD,02-82 Pipe /4 DI R-18E-R D11E-AJ,82 Sub /8 API-Reg R-18E-R D15E-AN,82 Sub /8 API-Reg R R4AJ-DC,02-82 Pipe /4 DI R R4AB-DC,15-82 Pipe /4 DI R R4AW-DC,01-82 Pipe /4 DI-22 Box Pin 6-3/4 DI-22 7 Pin 8-1/4 DI-22 8

9 11-1/4" Nominal Size - 11" Pipe / Bushing Size 12-7/8" Nominal Size / 12.75" Pipe / Bushing Size 13-1/8" Nominal Size Catalog Code Type S/S R-18G-R F2E-AC,82 Sub 23-5/8 6-5/8 API-Reg R R7AO-FD,02-82 Pipe 29-1/2 9-1/4 DI R-18G-R F2E-AW,82 Sub 36-1/2 6-5/8 API-Reg R-18G-R F16E-AO,82 Sub /8 API-Reg R R6AJ-FC,12-82 Pipe /4 DI-22 Catalog Code Type S/S R-181-R H2E-AD,82 Sub /8 API-Reg R R9AD-HD,02-82 Pipe /2 DI R R9AD-HC,04-82 Pipe /2 DI R-18I-R H2E-AD,82 Sub 53-3/4 6-5/8 API-Reg R R9AD-HC,17-82 Pipe /2 DI-22 Catalog Code Type S/S Box Box Box TBA TBA Sub /8 API-Reg TBA TBA Pipe /8 DI-42 TBA TBA Pipe /8 DI-42 Connection Connection Connection Pin 10-1/2 DI Pin Pin 9-1/4 DI /8 DI /2

10 NRS: Complete Assemblies Catalog Code OD S/S Connection* Weight Strength Reamer Hole Size R-R2Q-R B18K-CH, /4 DI Kg Standard 750 MM R-R7U-R F18K-AO, /4 29-1/2 29-1/2 DI22-S 631 Kg High 1.5 Meter NRS: Hub & Body Only Catalog Code OD S/S Connection* Weight Strength /4 DI Kg Standard /4 29-1/2 29-1/2 DI22-S 434 Kg High NRS: Wing Sets Catalog Code Use with these NRS Reamer Hole Size / MM / MM / Meter Other sizes are available upon request

11 Lift Bail product offering: Catalog Code Shoulder Thread Pin/Box Weight (kg)* SWL** Tons /2 6-5/8 API-Reg Box /4 7-5/8 API-Reg Box /4 DI-22 Pin /4 DI-22 Box /4 DI-22 Pin /4 DI-22 Box /4 9-1/4 DI-22 Pin /4 9-1/4 DI-22 Box /8 10-1/2 DI-22 Pin /8 10-1/2 DI-22 Box /8 10-1/8 DI-42 Pin /8 10-1/8 DI-42 Box *Weight Includes Shackle **Safe Working Load Lifting Eye Diameter Thread Shoulder Diameter Pin Shoulder Diameter Box

12 Float Valves to fit our products: Catalog Code Description Float Valve, 4R - Model "F" Float Valve, 5F-6R - Model "F"

13 Roller Stabilizer Repair Kits: Catalog Code OD HS Use with these Stabilizers / TBA TBA 8 9-7/ / / /4 TBA /4 12-1/ / 9201 HS OD

14 NOTES:

15

16 Märsta, Sweden, March a Subjected to alterations without prior notice. Atlas Copco Secoroc AB. All rights reserved COMMITTED TO SUSTAINABLE PRODUCTIVITY We stand by our responsibilties towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustainable ivity Atlas Copco Secoroc AB Box 521, Fagersta, Sweden Phone: wwww.atlascopco.com/secoroc