ARCHITECT S SUPPLEMENTAL INSTRUCTIONS

Size: px
Start display at page:

Download "ARCHITECT S SUPPLEMENTAL INSTRUCTIONS"

Transcription

1 ARCHITECT S SUPPLEMENTAL INSTRUCTIONS This document is based on AIA DOCUMENT G710 OWNER ARCHITECT CONSULTANT CONTRACTOR FIELD OTHER PROJECT: 3939 SW View Point Terrace Portland, OR ARCHITECT S SUPPLEMENTAL INSTRUCTION NO. 038 OWNER: VPT llc DATE OF ISSUANCE: CONTRACTOR: Pavilion Construction 4700 SW Macadam Ave Portland, OR ARCHITECT: COLAB Architecture + Urban Design llc 421 SW 6th Ave, Suite 1250 Portland, OR CONTRACT FOR: CONTRACT DATED: General Construction ARCHITECT S PROJECT NO.: /30/2014 The Work shall be carried out in accordance with the following supplemental instructions issued in accordance with the Contract Documents without change in Contract Sum or Contract Time. Proceeding with the Work in accordance with these instructions indicates your acknowledgement that there will be no change in the Contract Sum or Contract Time. DESCRIPTION: (Provide all material and labor to perform the following) Door hardware main entry door 101 ATTACHMENTS: Item: Pages: Date: Viewpoint Terrace Project Manual section ISSUED BY: ARCHITECT: Jessica Molinar COLAB Architecture + Urban Design llc

2 SECTION DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. Work under this section includes the complete finish hardware requirements for the project. Quantities listed are for the contractor s convenience only and are not guaranteed. Items not specifically mentioned, but necessary to complete the work shall be furnished, matching the items specified in quality and finish. B. Related Sections: 1. Section Metal Doors and Frames 2. Section Wood Doors and Frames 3. Section Aluminum Doors and Frames 1.2 QUALITY ASSURANCE A. Product Qualification: 1. To assure a uniform high quality of materials for the project, it is intended that only specified items be furnished. Comparable products may be accepted upon prior approval of architect. 2. Hardware to be new, free of defects, blemishes and excessive play. Obtain each kind of hardware (Mechanical latch and locksets, exit devices, hinges and closers) from one manufacturer except where specified. 3. Fire-Rated opening in compliance with NFPA80. Hardware UL10C/UBC-7-2 (positive pressure) compliant for given type/size opening and degree of label. Provide proper latching hardware, non-flaming door closers, approved bearing hinges and smoke seal. Furnish openings complete. B. Supplier Qualifications: 1. Hardware supplier will be a direct factory contract supplier who employs a certified Architectural Hardware Consultant (AHC) available at all reasonable times during the course of the work for project hardware consultation to owner, architect and contractor. 2. Supplier will be responsible for detailing, scheduling and ordering of finish hardware. 3. Conduct pre-installation conference at jobsite. Initiate and conduct with supplier, installer and related trades. Coordinate materials and techniques and sequence complex hardware items and systems installation. 4. Key Conference shall be initiated and conducted with owner to determine system, keyway(s) and structure. C. Installer Qualifications: 1. Installer to have not less than 3 years experience specializing in installation of work in this section. Company must maintain qualified personnel trained and experienced in installing hardware. DOOR HARDWARE

3 1.3 REFERENCES A. NFPA80 Fire Doors and Windows B. NFPA101 Life Safety Code C. NFPA105 Smoke and Draft Control Door Assemblies D. ANSI A117.1 Specifications for making Buildings usable by physically handicapped people. 1.4 SUBMITTALS A. Hardware schedule: Submit digitally or six copies of schedule. Organize vertically formatted schedule into Hardware Sets with index of doors and headings, indication complete designations of every item required for each door or opening. Include the following: 1. Type, style, function, size, quantity and finish of hardware items. 2. Name, part number and manufacture of each item. 3. Fastenings and other pertinent information. 4. Explanation of abbreviations, symbols and codes contained in schedule. 5. Door and frame sizes, materials and degrees of swing. B. Product Data: Submit four copies for each product indicated. C. Templates: Obtain and distribute templates for doors, frames, and other works specified to be prepared for installing door hardware. D. Wiring/Riser diagrams: As required for electric hardware indicated. E. Maintenance Data: For each type of door hardware to include in maintenance manuals specified in Division 1. F. Keying Schedule: Prepared by or under the supervision of supplier, after receipt of the approved finish hardware schedule, detailing Owner s final keying instructions for locks. G. Samples: Upon request submit material samples. 1.5 DELIVERY, STORAGE, AND HANDLING A. Deliver, store, handle and protect products to project site under provisions of Division 1 and as specified herein. B. Tag each item or package separately, with identification related to the final Door Hardware Schedule, and include basic installation instructions with each item or package. C. Deliver keys to Owner by registered mail. 1.6 WARRANTY A. The finish hardware shall have a limited warranty against defects in workmanship and operation for a period of one year from date of substantial completions and the following items are as shown: DOOR HARDWARE

4 1. Closers: Ten Years 2. Exit Devices: Ten Years 3. Locksets: Ten years PART 2 - PRODUCTS 2.1 MATERIAL AND FABRICATION A. Provide all door hardware for complete work, in accordance with the drawings and as specified herein. B. Provide items and quantities not specifically mentioned to ensure a proper and complete operational installation. 2.2 MANUFACTURERS A. Approval of products from manufacturers indicated as Acceptable Manufacturer is contingent upon those products providing all functions and features and meeting all requirements of scheduled manufacturer s product. ITEM SCHEDULED MANUFACTURER ACCEPTABLE MANUFACTURER Hinges Ives (IVE) Hager, McKinney, Flush Bolts & Coordinators Ives (IVE) Burns, Rockwood Locksets & Deadlocks Falcon (FAL) Best, Sargent Exit Devices & Mullions Falcon (FAL) Precision, Sargent Electric Strikes Von Duprin (VON) HES, Folger Adam Cylinders & Keying Schlage (SCH) Best, Corbin-Russwin Door Closers Falcon (FAL) Corbin/Russwin, Sargent Door Trim Ives (IVE) Burns, Rockwood Protection Plates Ives (IVE) Burns, Rockwood Overhead Stops Glynn-Johnson (GLY) Rixson, Sargent Thresholds & Weatherstrip National Guard Products (NGP) Pemko, Zero 2.3 HANGING A. Conventional Hinges: Hinge open width minimum, but of sufficient throw to permit maximum door swing. Steel or stainless steel pins: 1. Three hinges per leaf to 7 feet, 6-inch height. Add one for each additional 30 inches in height or any fraction thereof. 2. Provide 4 ½ x 4 ½ for 1 3/4 thick doors up to 36. Provide 5 x 4 ½ on doors over Provide 4 x 4 for 1 3/8 thick doors. 4. Exterior outswing doors to have non removable (NRP) pins. 5. Pin tips, flat button, finish to match leaves 6. Interior doors over 36 Heavy weight 7. Interior doors up to 36 Standard weight DOOR HARDWARE

5 2.4 LOCKSETS, LATCHSETS, DEADBOLTS A. Extra Heavy Duty Cylindrical Locks: Falcon T Series 1. Provide cylindrical locks conforming to ANSI A156.2 Series 4000, Grade 1. Cylinders: Refer to KEYING article, herein. 2. Provide locks with standard 2-3/4 inches (70 mm) backset, unless noted otherwise, with a 1/2 inch (13 mm) latch throw. Provide proper latch throw for UL listing at pairs. 3. Provide locksets with separate anti-rotation thru-bolts, and no exposed screws. 4. Provide independently operating levers with two external return spring cassettes mounted under roses to prevent lever sag. 5. Provide standard ASA strikes unless extended lip strikes are necessary to protect trim. 6. Lever Trim: Solid cast levers without plastic inserts, and wrought roses on both sides. a. Lever Design: Falcon Quantum. B. Cylindrical Locks: Falcon W Series 1. Provide cylindrical locks conforming to ANSI A156.2 Series 4000, Grade 2. Cylinders: Refer to KEYING article, herein. 2. Provide locks with standard 2-3/4 inches (70 mm) backset, unless noted otherwise, with 1/2 inch (13 mm) latch throw. Provide 2-3/8 inches (60 mm) backset where noted of if door or frame detail requires. Provide proper latch throw for UL listing at pairs. 3. Provide locksets with separate anti-rotation thru-bolts, and no exposed screws. Provide levers that operate independently, and have internal return springs to prevent lever sag. 4. Provide standard ASA strikes unless extended lip strikes are necessary to protect trim. 5. Lever Trim: Solid cast levers without plastic inserts, and wrought roses on both sides. a. Lever Design: Falcon Quantum C. Tubular Locks: Schlage F Series 1. Provide tubular locks conforming to ANSI A156.2 Series 4000, Grade 2. Cylinders: Refer to KEYING article, herein. 2. Provide locks with standard 2-3/8 inches (60 mm) adjustable to 2-3/4 inches (70 mm) backset with 1/2 inch (13 mm) latch throw. Provide 2 ¾ inches (70 mm) backset, unless 2-3/8 inches (60 mm) is required by door or frame detail, or noted otherwise. 3. Provide locksets that fit standard 2-1/8 inches (54 mm) diameter bore without use of thrubolts. 4. Standard Rose Size: 2-1/2 inches (64 mm) in diameter. 5. Door Thickness: Locksets adjustable to fit in 1-3/8 inches (35 mm) or 1-3/4 inches (44 mm) door thickness. 6. Provide standard T-strikes unless extended lip strikes are necessary to protect trim. 7. Lever Trim: Solid cast levers without plastic inserts, and wrought roses on both sides. a. Lever Design: Schlage Jazz D. Interconnected Locks: Schlage CS210 Series 1. Provide interlocked locksets conforming to ANSI A Series 5000, Grade 2 with simultaneous retraction of deadbolt and latch for single motion egress. Cylinders: Refer to KEYING article, herein. 2. Provide locks with 2-3/4 inches backset, based on door detail, with 1/2 inch latch throw latchbolt and 1 inch throw deadbolt. 3. Provide independently operating levers with two external return spring cassettes mounted under roses to prevent lever sag. DOOR HARDWARE

6 4. Provide manufacturers standard T-strike, unless extended lip strike is necessary to protect trim, and deadbolt strike. a. Lever Design: Schlage Neptune 2.5 EXIT DEVICES A. Rated and Non-Rated Exit Devices: Falcon 24/25 Series 1. Provide exit devices tested to ANSI/BHMA A156.3 Grade 1, and UL listed for Panic Exit or Fire Exit Hardware. Cylinders: Refer to KEYING article, herein. 2. Exit Devices: Touchpad type, fabricated of brass, bronze, stainless steel, or aluminum, plated to standard architectural finishes to match balance of door hardware. 3. Touchpad: Extend minimum of one half of door width. Match exit device finish or provide compatible finish. Provide compression springs in devices, latches, and outside trims or controls, tension springs also acceptable. 4. Provide devices with deadlatching feature for security and for future addition of alarm kits and other electrical requirements. 5. Provide manufacturer's standard strikes. 6. Provide exit devices cut to door width and height. Locate exit devices at height recommended by exit device manufacturer, allowable by governing building codes, and approved by Architect. 7. Mount mechanism case flush on face of doors, or provide spacers to fill gaps behind devices. Where glass trim or molding projects off face of door, provide glass bead kits. 8. Provide hex key dogging at non-fire-rated exit devices. 9. Where lever handles are specified as outside trim for exit devices, provide heavy-duty lever trims with forged or cast escutcheon plates. Provide vandal-resistant levers that will travel to 90-degree down position when more than 35 pounds of torque are applied, and which can easily be re-set. a. Lever Style: Match lever style of locksets. 10. Provide UL labeled fire exit hardware for fire rated openings. 2.6 KEYS, KEYING, AND KEY CONTROL A. See Keying Requirements in this section 2.7 CLOSERS A. Heavy Duty Surface Closers: Falcon SC70 Series 1. Provide door closers certified to ANSI/BHMA A156.4 Grade 1 requirements by BHMA certified independent testing laboratory. ISO 9000 certify closers. Stamp units with date of manufacture code. 2. Provide door closers with fully hydraulic, full rack and pinion action with aluminum cylinder. 3. Closer Body: 1-1/2 inch (38 mm) diameter with 11/16 inch (17 mm) diameter heat-treated pinion journal. 4. Hydraulic Fluid: Fireproof, passing requirements of UL10C, and requiring no seasonal closer adjustment for temperatures ranging from 120 degrees F to -30 degrees F. 5. Spring Power: Continuously adjustable over full range of closer sizes, and providing reduced opening force as required by accessibility codes and standards. DOOR HARDWARE

7 6. Hydraulic Regulation: By tamper-proof, non-critical valves, with separate adjustment for latch speed, general speed, and backcheck. 7. Pressure Relief Valve (PRV) Technology: Not permitted. 8. Provide special templates, drop plates, mounting brackets, or adapters for arms as required for details, overhead stops, and other door hardware items interfering with closer mounting. B. Medium Duty Surface Closers: Falcon SC80 Series 1. Provide door closers certified to ANSI/BHMA A156.4 Grade 1 requirements by BHMA certified independent testing laboratory. 2. Provide door closers with fully hydraulic, full rack and pinion action with aluminum cylinder. 3. Closer Body: 1-1/4 inch (32 mm) diameter, with 5/8 inch (16 mm) diameter pinion journal. 4. Hydraulic Fluid: Fireproof, passing requirements of UL10C, and requiring no seasonal closer adjustment for temperatures ranging from 120 degrees F to -30 degrees F. 5. Spring Power: Continuously adjustable over full range of closer sizes, and providing reduced opening force as required by accessibility codes and standards. 6. Hydraulic Regulation: By tamper-proof, non-critical valves, with separate adjustment for latch speed, general speed, and backcheck. 7. Pressure Relief Valve (PRV) Technology: not permitted. 8. Provide special templates, drop plates, mounting brackets, or adapters for arms as required for details, overhead stops, and other door hardware items interfering with closer mounting. C. Light Duty Surface Closers: Falcon SC60 Series 1. Provide door closers certified to ANSI/BHMA A156.4 Grade 1 requirements by BHMA certified independent testing laboratory. 2. Provide door closers with fully hydraulic, full rack and pinion action with aluminum cylinder. 3. Closer Body: 1-1/8 inch (29 mm) diameter with 5/8 inch (16 mm) diameter pinion journal. 4. Hydraulic Fluid: Fireproof, passing requirements of UL10C. 5. Pressure Relief Valve (PRV) Technology: Not permitted. 6. Provide special templates, drop plates, mounting brackets, or adapters for arms as required for details, overhead stops, and other door hardware items interfering with closer mounting. 2.8 OTHER HARDWARE A. Door stops: Provide stops to protect walls, casework or other hardware. 1. Except as otherwise indicated, provide stops (wall, floor or overhead) at each leaf of every swinging door leaf. 2. Where wall or floor stops are not appropriate, provide overhead holders. B. Weatherstrip and Gasket 1. Provide continuous weather-strip gasketing on exterior doors and provide smoke, light, or sound gasketing on interior doors where indicated or scheduled. 2. Provide non-corrosive fasteners as recommended by the manufacturer for application indicated. C. Thresholds DOOR HARDWARE

8 1. Except as otherwise indicated, provide standard metal threshold unit of type, size and profile as detailed or scheduled. D. Silencers 1. Interior hollow metal frames, 3 for single doors, 2 for pairs of doors. E. Kickplates 1. Four beveled edges,.050 inches minimum thickness, height and width as scheduled. Sheet-metal screws of bronze or stainless steel to match other hardware. 2.9 HARDWARE FINISH A. Provide the following finishes unless noted differently in hardware groups: Hinges Locksets Exit Devices Closers Kickplates Other Hardware Thresholds Weatherstrip/Sweeps 630 Stainless Steel Exterior, 262 Dull Chrome Interior 626 Dull Chrome 626 Dull Chrome 689 Aluminum 630 Stainless Steel 626 Dull Chrome Aluminum Aluminum 2.10 KEYING REQUIREMENTS A. All keyed cylinders shall be subject to a new Schlage Masterkey system. B. Furnish cylinders with construction cores. Following construction supply permanent keyed cores. C. Cylinders to be furnished with visual key control with key code. Stamped on the face of the keys and marked on the back or side of the cylinders. D. Key Quantities 6 EA Master Keys 4 EA Control Keys 2 EA Construction Control Keys 10 EA Construction Keys 3 EA Change Keys per keyed alike group PART 3 - EXECUTION 3.1 ACCEPTABLE INSTALLERS: A. Factory trained, certified, and carries a factory-issued card certifying that person as a Certified Installer. Alternative: can demonstrate suitably equivalent competence and experience. DOOR HARDWARE

9 3.2 PREPARATION A. Ensure that walls and frames are square and plumb before hardware installation. B. Locate hardware per SDI-100 and applicable building, fire, life-safety, accessibility, and security codes. Notify Architect of any code conflicts before ordering materials. 3.3 INSTALLATION A. Do not install surface mounted items until finishes have been completed on substrate. Set units level, plumb and true to line and location. Adjust and reinforce attachment substrate for proper installation and operation. B. Locate floor stops not more than 4 inches from the wall. C. Drill pilot holes for fasteners in wood doors and/or frames. 3.4 ADJUSTING A. Adjust and check for proper operation and function. Replace units, which cannot be adjusted to operate freely and smoothly. B. Hardware damaged by improper installation or adjustment methods to be repaired or replaced to Owner s satisfaction. 3.5 FOLLOW UP INSPECTION A. Installer to provide letter of agreement to Owner that approximately 6 months after substantial completion, installer will visit project with representative of the manufacturers of the locking devices and door closers to accomplish the following: 1. Re-adjust locks and closers 2. Evaluate maintenance procedures and recommend changes or additions, and instruct Owner s personnel. 3. Identify items that have deteriorated or failed. 4. Submit written report identifying problems and likely future problems. 3.6 DEMONSTRATION A. Demonstrate electrical, electronic and pneumatic hardware system including adjustment and maintenance procedures 3.7 PROTECTION/CLEANING A. Cover installed hardware, protect from paint, cleaning agents, weathering, carts/barrows, etc. Remove covering materials and clean hardware just prior to substantial completion. Clean adjacent wall, frame and door surfaces soiled from installation/reinstallation process. DOOR HARDWARE

10 3.8 DOOR HARDWARE GROUPS HW SET: 01 1 EA PANIC HARDWARE 22-NL-OP-110MD 689 VON 1 EA RIM CYLINDER ICX 1 EA PERMANENT CORE BALANCE OF HARDWARE BY GATE MANUFACTURER FABRICATE GATE TO ACCOMMODATE PROPER INSTALLATION OF PANIC DEVICE. FIELD DRILL WEEP HOLES FOR PANIC DEVICE PUSH PAD. HW SET: 02 1 EA K-I-L CYLINDER HARDWARE BY DOOR / FRAME MANUFACTURER VERIFY CYLINDER REQUIREMENTS WITH DOOR/FRAME MANUFACTURER HW SET: 03 3 EA HINGE 5BB1 5 X 4.5 NRP 630 IVE 1 EA STOREROOM LOCK T581P QUA 626 FAL KEYED ALIKE FOR CONSTRUCTION 1 EA PERMANENT CYL FOR FALCON T LOCK 1 EA SURFACE CLOSER SC71 HDPA 689 FAL 1 EA KICK PLATE " X 2" LDW B4E 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 1 SET SEALS 5050B (HEAD & JAMBS) BRN NGP 1 EA DOOR SWEEP C627A CL NGP 1 EA THRESHOLD 659 MS/LA AL NGP HW SET: 04 DOOR HARDWARE

11 2 EA PIVOT SET 7226F SET 630 IVE 2 EA INTERMEDIATE PIVOT 7226F INT 630 IVE 1 EA POWER TRANSFER EPT FAL 1 EA PANIC HARDWARE 24-C-EO 626 FAL 1 EA ELEC PANIC EL-24-C-C FAL HARDWARE 1 EA RIM CYLINDER ICX 1 EA PERMANENT CORE EA 90 DEG OFFSET PULL 8190HD 10" O 630 IVE 2 EA OVERHEAD STOP 100S ADJ 630 GLY 2 EA SURFACE CLOSER SC71 HDPA 689 FAL 2 EA TOP RAIL DROP PLATE SC70-18PA 689 FAL 2 EA BLADE STOP SPACER SC FAL 1 EA POWER SUPPLY PS RS LGR FAL ACCESS CONTROL - WORK OF DIVISION 28 CARD READER - WORK OF DIVISION 28 PERIMETER SEALS BY DOOR SUPPLIER OPERATIONAL DESCRIPTION VALID CREDENTIAL WILL MOMENTARILY RETRACT LATCHBOLT OF RHR LEAF, DOOR CAN BE OPENED FROM OUTSIDE. ALWAYS FREE EGRESS. HW SET: 05 3 EA HINGE 5BB1 4.5 X IVE 1 EA STOREROOM LOCK W581P QUA 626 FAL KEYED ALIKE FOR CONSTRUCTION 1 EA K-I-L CYLINDER EA OH STOP 90S 630 GLY 1 EA SURFACE CLOSER SC81 REG FC 689 FAL 1 EA KICK PLATE " X 2" LDW B4E 630 IVE 1 SET SEALS 5050B (HEAD & JAMBS) BRN NGP HW SET: 06 3 EA HINGE 5BB1 4.5 X IVE 1 EA FIRE EXIT HARDWARE F-25-R-L-BE-510-QUA 630 FAL 1 EA SURFACE CLOSER SC71 SS 689 FAL 1 EA KICK PLATE " X 2" LDW B4E 630 IVE 1 SET SEALS 5050B (HEAD & JAMBS) BRN NGP DOOR HARDWARE

12 HW SET: 07 3 EA HINGE 5BB1 4.5 X IVE 1 EA PASSAGE SET W101S QUA 626 FAL 1 EA SURFACE CLOSER SC81 REG FC 689 FAL 1 EA KICK PLATE " X 2" LDW B4E 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 1 SET SEALS 5050B (HEAD & JAMBS) BRN NGP HW SET: 08 1 EA POWER TRANSFER EPT FAL 1 EA DELAYED PANIC CX-98-L-BE VON HARDWARE 1 EA MORTISE CYLINDER ICX 1 EA PERMANENT CORE EA SURFACE CLOSER SC71 REG 689 FAL 1 EA WALL STOP WS406/407CCV 630 IVE 1 EA DOOR CONTACT HM BLK SCE 1 EA POWER SUPPLY PS914 LGR FAL ACCESS CONTROL - WORK OF DIVISION 28 BALANCE OF HARDWARE BY DOOR SUPPLIER 2 EA CARD READER - WORK OF DIVISION 28 PERIMETER SEALS BY DOOR SUPPLIER OPERATIONAL DESCRIPTION DELAYED EGRESS SYSTEM: DEPRESSING PUSHBAR OF PANIC DEVICE BEGINS 15 SECOND IRREVERSIBLE ALARM CYCLE. UPON COMPLETION OF ALARM CYCLE FREE EGRESS IS ALLOWED. LEVER TRIM NORMALLY LOCKED. DEVICE CAN BE ARMED, RESET OR DISARMED BY KEY OR ACCESS CONTROL. PRESENTATION OF VALID CARD WILL TEMPORARILY SHUNT ALARM AND ALLOW ACCESS FROM PUSH AND PULL SIDES OF DOOR. DOOR WILL UNLOCK UPON POWER LOSS, SIGNAL FROM SPRINKLER OR FIRE DETECTION SYSTEM, OR BY SIGNAL FROM THE FIRE COMMAND CENTER. HW SET: 09 3 EA HINGE 5BB1 4.5 X IVE 1 EA STOREROOM LOCK W581P QUA 626 FAL KEYED ALIKE FOR CONSTRUCTION 1 EA K-I-L CYLINDER EA SURFACE CLOSER SC81 REG FC 689 FAL 1 EA KICK PLATE " X 2" LDW B4E 630 IVE DOOR HARDWARE

13 1 EA WALL STOP WS406/407CCV 630 IVE 1 SET SEALS 5050B (HEAD & JAMBS) BRN NGP HW SET: 10 1 EA MORTISE CYLINDER BALANCE OF HARDWARE BY DOOR SUPPLIER VERIFY CYLINDER REQUIREMENTS WITH DOOR/FRAME MANUFACTURER HW SET: 11 3 EA HINGE 5BB1 4.5 X IVE 1 EA ENTRANCE LOCK CS210TD NEP PLY 1 EA PERMANENT CORE EA SURFACE CLOSER SC61 REG SLIM 689 FAL 1 EA KICK PLATE " X 2" LDW B4E 630 IVE 1 EA BASE SPRING STOP IVE USE IVES 70 HINGE PIN STOP WHERE WALL IS NOT AVAILABLE 1 EA DOOR VIEWER U IVE PERIMETER SEALS BY DOOR SUPPLIER NOTE: TRANSITION STRIP PROVIDED BY OTHERS. COORDINATE DOOR UNDERCUT WITH DOOR SHOE, FLOORING, AND TRANSITION STRIP. HW SET: 12 3 EA HINGE ***5PB1 RC1 4 X IVE 1 EA PASSAGE SET F10 JAZ 1 EA BASE SPRING STOP IVE USE IVES 70 HINGE PIN STOP WHERE WALL IS NOT AVAILABLE 3 EA SILENCER SR65 GRY IVE ***PROVIDE 4 ½ X 4 ½ HINGE AT 1 ¾ THICK DOORS HW SET: 13 DOOR HARDWARE

14 3 EA HINGE ***5PB1 RC1 4 X IVE 1 EA PRIVACY LOCK F40 JAZ 1 EA BASE SPRING STOP IVE USE IVES 70 HINGE PIN STOP WHERE WALL IS NOT AVAILABLE 3 EA SILENCER SR65 GRY IVE ***PROVIDE 4 ½ X 4 ½ HINGE AT 1 ¾ THICK DOORS HW SET: 14 1 EA MULTIPLE BYPASS 111MD JOH PACK 3 EA FLUSH PULL IVE HW SET: 15 1 EA POCKET DOOR 1500 JOH ASSEMBLY 1 EA FLUSH PULL IVE 1 EA DOOR EDGE PULL IVE HW SET: 16 6 EA HINGE ***5PB1 RC1 4 X IVE 2 EA ROLLER LATCH RL30A 626 IVE 2 EA SINGLE DUMMY TRIM F170 JAZ 619 SCH 2 EA BASE SPRING STOP 061 USE IVES 70 HINGE PIN STOP WHERE WALL IS NOT AVAILABLE 652 IVE ***PROVIDE 4 ½ X 4 ½ HINGE AT 1 ¾ THICK DOORS HW SET: 17 3 EA HINGE 5BB1 4.5 X IVE 1 EA STOREROOM LOCK W581P QUA 626 FAL KEYED ALIKE FOR CONSTRUCTION 1 EA K-I-L CYLINDER EA SURFACE CLOSER SC81 HDPA FC 689 FAL DOOR HARDWARE

15 1 EA KICK PLATE " X 2" LDW B4E 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 1 SET SEALS 5050B (HEAD & JAMBS) BRN NGP End of Section DOOR HARDWARE

View Point Terrace Apartments SECTION DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY

View Point Terrace Apartments SECTION DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY SECTION 087100 DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. Work under this section includes the complete finish hardware requirements for the project. Quantities listed are for the contractor s convenience

More information

DESIGN!!GUIDELINES!!!!!

DESIGN!!GUIDELINES!!!!! 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 08 71 00 - DOOR HARDWARE GENERAL Work under this section comprises furnishing and installing hardware specified for a complete and

More information

B) The University shall check the installation of finish hardware at the completion of the Project.

B) The University shall check the installation of finish hardware at the completion of the Project. 08700 HARDWARE 1.0 General A) The University of California, Santa Barbara, uses IR Security & Safety Consultants (AHC) (626 585-9927) as its consultant for doors and door hardware. Contacts with the firm

More information

Design Guidelines and Standards Manual University of Cincinnati

Design Guidelines and Standards Manual University of Cincinnati SECTION 08710D - A. SPECIFICATIONS FORMAT 1. It is preferred that this section include all items of door hardware. Window hardware and operators should be specified in the window section. This approach

More information

FINISH HARDWARE

FINISH HARDWARE 1.01 DESCRIPTION OF WORK PART 1 GENERAL FINISH HARDWARE 08710-1 A. Work under this section comprises of furnishing and installing the hardware specified herein and noted on the drawings for a complete

More information

DIVISION 8 OPENINGS SECTION DOOR HARDWARE

DIVISION 8 OPENINGS SECTION DOOR HARDWARE DIVISION 8 OPENINGS SECTION 08 71 20 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

COMMERCIAL DOOR HARDWARE PRODUCT CATALOG HOME DEPOT EXCLUSIVE SPECIAL ORDER PROGRAM FOR MORE INFORMATION

COMMERCIAL DOOR HARDWARE PRODUCT CATALOG HOME DEPOT EXCLUSIVE SPECIAL ORDER PROGRAM FOR MORE INFORMATION HOME DEPOT EXCLUSIVE SPECIAL ORDER PROGRAM COMMERCIAL DOOR HARDWARE PRODUCT CATALOG FOR MORE INFORMATION Find Universal Hardware in QuoteCenter Downloadable version of this catalog can be found at UniversalHardware.com

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

SECTION FINISH HARDWARE

SECTION FINISH HARDWARE Florida International University 05/09/2012 Finish Hardware Specifications Section 08 71 00 SECTION 08 71 00 FINISH HARDWARE PART 1 GENERAL 1.01 SECTION INCLUDES A. Finish hardware items required for swinging

More information

Qty Description Catalog Number Finish Mfr 6 EA HINGE 5BB1 4.5 X 4.5 NRP 630 IVE 2 EA SURFACE BOLT SB360 12" T 604 IVE 1 EA STOREROOM

Qty Description Catalog Number Finish Mfr 6 EA HINGE 5BB1 4.5 X 4.5 NRP 630 IVE 2 EA SURFACE BOLT SB360 12 T 604 IVE 1 EA STOREROOM Hardware Group No. 01 - Exterior-Storefront Provide each PR door(s) with the following: 6 EA 5BB1 4.5 X 4.5 NRP 630 IVE 2 EA PANIC HARDWARE 9947-NL-OP-110MD 626 VON 2 EA RIM CYLINDER 20-057 ICX 626 SCH

More information

5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2

5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2 5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2 Features & Construction ANSI A156.3, Grade 2 heavy duty exit device in surface

More information

A. Hardware for new doors. B. Keying of new hardware into existing hardware keying system.

A. Hardware for new doors. B. Keying of new hardware into existing hardware keying system. SECTION 08 71 00 - PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply

More information

Adams rite. Exit Devices & parts exit devices series exit device parts

Adams rite. Exit Devices & parts exit devices series exit device parts Adams rite Exit Devices & parts exit devices 8099 8211 8099 Active Dummy Bar with Switch Can be wired normally open or normally closed to operate maglock, alarm, etc No latching mechanism 8211 Surface

More information

98/99 Series Exit Devices

98/99 Series Exit Devices 98/99 Series Exit Devices 98/99 Finishes Finishes* Color US Number BHMA Number Chromium, Polished US26 625 Anodized, Aluminum US28 628 Chromium, Dull US26D 626 Brass, Polished US3 605 Brass, Dull US4 606

More information

SERIES 700 TECHNICAL DETAILS MONDAY, JANUARY 21, 2008

SERIES 700 TECHNICAL DETAILS MONDAY, JANUARY 21, 2008 SERIES 700 TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Overall Preassembled Door Dimensions 4. Door Leaf Dimensions 5. Door Leaf Construction 6. Cylindrical Lock Preparation 7.

More information

9827/9927 Surface mounted vertical rod device. 9827/9927 Surface mounted vertical rod device. Specifications Device functions

9827/9927 Surface mounted vertical rod device. 9827/9927 Surface mounted vertical rod device. Specifications Device functions Top latch 299 Top strike for all types of single or double doors, UL listed for panic exit hardware. Devices are ANSI A56.3 200 Grade. Covers stock hollow metal doors with 86 or 6 cutouts. The 9827 device

More information

Title Page Table of Contents Instruction to Bidders Form of Proposal Equal Opportunity Statement Form of Guarantee Supplemental General Conditions

Title Page Table of Contents Instruction to Bidders Form of Proposal Equal Opportunity Statement Form of Guarantee Supplemental General Conditions P00000000 0000 DOCUMENTS SPECIFICATION DIVISION 8 NUMBER SECTION DESCRIPTION DIVISION 08 DOOR AND WINDOWS SECTION 08710 - DOOR HARDWARE Title Page Table of Contents Instruction to Bidders Form of Proposal

More information

W Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series

W Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series Lock type finish chart MA W Grade 2, medium-duty cylindrical lever and knob locks RU T Whether your application is government/military, retail, industrial or multi-family, there s a W lock that fits perfectly.

More information

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20 Exit Devices Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy

More information

33A/35A Series Exit Devices

33A/35A Series Exit Devices 33A/35A Series Exit Devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part

More information

MA Series. Mortise Lockset Functions. MA101 FO1 Passage Latchset Latchbolt by knobs/levers at all times.

MA Series. Mortise Lockset Functions. MA101 FO1 Passage Latchset Latchbolt by knobs/levers at all times. MA Series Mortise Lockset Functions ANSI MA101 FO1 Passage Latchset Latchbolt by knobs/levers at all times. MA301 F02 Privacy Lock Latchbolt by knobs/levers, deadbolt by turn inside or emergency key outside.

More information

Light/Medium-Duty Knob Locksets. CK4700 Series

Light/Medium-Duty Knob Locksets. CK4700 Series Light/Medium-Duty Knob Locksets CK4700 Series Applications Quality The CK4700 series is a Grade 2 light/medium-duty knob lockset which provides an outstanding combination of value and performance. It is

More information

CL3500 Series. Heavy-Duty Cylindrical Lever Lockset

CL3500 Series. Heavy-Duty Cylindrical Lever Lockset Series Heavy-Duty Cylindrical Lever Lockset Applications Index Applications...2 Features... 3 Functions...4 Trim Designs...6 Options & Accessories...7 How to Order...9 Quick Codes...10 How to...11 Applications

More information

SERIES 500 TECHNICAL DETAILS THURSDAY, JANUARY 24, 2008

SERIES 500 TECHNICAL DETAILS THURSDAY, JANUARY 24, 2008 SERIES 500 TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Door Overall Dimensions 4. Door Construction 5. Total Preassembled Dimensions 6. Overall Frame Dimensions 7. Frame Profile

More information

JUNE 9, 2017 SECTION SECTION DOOR HARDWARE

JUNE 9, 2017 SECTION SECTION DOOR HARDWARE JUNE 9, 2017 SECTION 087100-1 SECTION 087100 PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Items known commercially as finish or door hardware required for swing, sliding, and folding doors, except

More information

3400 Series

3400 Series 3400 Series Hager 3400 Series Grade 1 lock is designed and engineered to withstand the most abusive environments. We ve categorized it extra heavy duty and you can rest assured that it has been tested

More information

Continuous Hinges Hager McKinney Markar

Continuous Hinges Hager McKinney Markar Section 087100 - Finish Hardware Finish hardware materials must conform to the following standards. Subject to compliance with these design requirements, manufacturers offering products that may be incorporated

More information

626 FAL REQUIRED 1 EA STOREROOM LOCK T581 Q X IC - F2 MECH & 626 FAL

626 FAL REQUIRED 1 EA STOREROOM LOCK T581 Q X IC - F2 MECH & 626 FAL Hardware Group No. 201 1 EA STOREROOM LOCK T581 Q X IC - F2 (KNURLE @ MECH & ELECT) Hardware Group No. 202 204 NOT USED Hardware Group No. 205H 3 EA HINGE 5BB1HW 4.5 X 4.5 NRP 630 IVE 1 EA STOREROOM LOCK

More information

MA Series. Mortise Lockset Functions. MA101 FO1 Passage Latchset Latchbolt by knobs/levers at all times.

MA Series. Mortise Lockset Functions. MA101 FO1 Passage Latchset Latchbolt by knobs/levers at all times. MA Series Mortise Lockset Functions ANSI MA101 FO1 Passage Latchset Latchbolt by knobs/levers at all times. MA301 F02 Privacy Lock Latchbolt by knobs/levers, deadbolt by turn inside or emergency key outside.

More information

CAL-ROYAL & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156.

CAL-ROYAL & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156. CAL-ROYAL P R O D U C T S, I N C. 3 HOUR FIRE RATED 2200 & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 1 Lifetime Warranty BHMA CERTIFIED

More information

October 2014 Page 1 of 12

October 2014 Page 1 of 12 Part 1 General 1.1 Summary 1. Unless otherwise indicated, follow the standards below when specifying hardware work. These standards are not intended to restrict or replace professional judgment. 1.2 Design

More information

UC DAVIS Campus Standards & Design Guide DIVISION 08 OPENINGS

UC DAVIS Campus Standards & Design Guide DIVISION 08 OPENINGS DIVISION 08 OPENINGS METAL DOORS AND FRAMES 08 11 00 Frames: Steel Door Institute (SDI) Extra Heavy Duty. Fully welded with mortar boxes for all hardware. Frames for all exterior openings and interior

More information

An ASSA ABLOY Group brand Series. Flatbar Exit Devices

An ASSA ABLOY Group brand Series. Flatbar Exit Devices An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices introduction Yale 1800 series exit devices are the ideal choice for economy commercial applications where consistent quality, ease of use and

More information

Optional Latchbolts /8" (60 mm) Square or Round Corner, Dead Latch /4" (70 mm) Square or Round Corner, Dead Latch - Standard

Optional Latchbolts /8 (60 mm) Square or Round Corner, Dead Latch /4 (70 mm) Square or Round Corner, Dead Latch - Standard Cylindrical Grade 1 Extra Heavy Duty Commercial, Industrial, Institutional 3400 Series Lifetime warranty No exposed mounting screws Non-handed Standard and interchangeable cores available Optional Latchbolts

More information

MB1 Series ANSI Grade 1 Extra Heavy Duty Lever Locks

MB1 Series ANSI Grade 1 Extra Heavy Duty Lever Locks MB1 Series ANSI Grade 1 Extra Heavy Duty Lever Locks FEATURES: Heavy duty chassis with various lever styles available. Strong cast and machined stainless steel hubs, mounted with heavy duty return springs.

More information

T H E F A L C O N D I F F E R E N C E

T H E F A L C O N D I F F E R E N C E T H E F A L C O N D I F F E R E N C E S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you spec not only has to meet local building codes, but also your

More information

K Series. Grade 1 cylindrical lever locks

K Series. Grade 1 cylindrical lever locks K Series Grade 1 cylindrical lever locks Falcon K Series 4 Overview 5 Features and specifications 6 Designs and finishes 7 Functions 8 Cylinders 9 Competitive keyways 10 Options and accessories 11 Competitive

More information

Locksets. Requirements. Approved Manufacturers. Schlage D Series Rho Trim No Substitution Cylinders Medeco No Substitution

Locksets. Requirements. Approved Manufacturers. Schlage D Series Rho Trim No Substitution Cylinders Medeco No Substitution Locksets Requirements -All Locksets To Be Grade 1 Series 4000 Cylindrical -All Locksets To Have ADA Approved Lever Trim -All Locksets to be Dull Chrome (626) Finish -All Lock And Cylinders To Be Keyed

More information

DIAMOND DOOR PRODUCTS TECHNICAL DETAILS MARCH 2010

DIAMOND DOOR PRODUCTS TECHNICAL DETAILS MARCH 2010 DIAMOND DOOR PRODUCTS TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Warranty 4. Door Overall Dimensions Standard locations 5. Door Construction 6. Total Preassembled Dimensions 7.

More information

.1 Append the Hardware Schedule attached to this addendum to the end of the Section.

.1 Append the Hardware Schedule attached to this addendum to the end of the Section. Addendum 1 Page 1 ADDENDUM NO. 1 Window & Door/Hardware Replacement, Exterior Cladding & Washroom Upgrades Sturgeon Falls, Ontario The following Addendum shall be part of the Tendering Documents and shall

More information

5/8" Radius Corner Hinges

5/8 Radius Corner Hinges 5/8" Radius Corner Hinges FULL MORTISE 5 Knuckles Removable Pin Steel with Steel Pin Non-Template Pack with Phillips flat-head screws (machine and wood) H44-50R SPRING HINGE UL Listed Steel with Steel

More information

33A/35ATM. Series. Exit Devices

33A/35ATM. Series. Exit Devices 33A/35ATM Series Exit Devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical

More information

BUILDING DESIGN STANDARDS FACILITIES MANAGEMENT AND ANCILLARY SERVICES DOORS AND OPENINGS - DIVISION 08 Hardware

BUILDING DESIGN STANDARDS FACILITIES MANAGEMENT AND ANCILLARY SERVICES DOORS AND OPENINGS - DIVISION 08 Hardware Part 1 General 1.1 Summary.1 Unless otherwise indicated, follow the standards below when specifying hardware work. These standards are not intended to restrict or replace professional judgment. 1.2 Design

More information

HARDWARE SCHEDULE PROJECT XYZ

HARDWARE SCHEDULE PROJECT XYZ HARDWARE SCHEDULE FOR PROJECT XYZ ARCHITECT: ABC ARCHITECTURE CONTRACTOR: EFG GLASS COMPANY PHONE: 123 456-7890 FAX: 123 456-7891 PREPARED BY: JANE SMITH DATE: OCTOBER 14, 2013 Page 1 Abbr BY OTHERS Manufacturers

More information

33A/35A Series. Exit devices

33A/35A Series. Exit devices 33A/35A Series Exit devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part

More information

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series Lock type finish chart MA X Grade 1, heavy-duty cylindrical knob locks RU T When you need a tough, reliable lock that can also withstand the corrosive conditions of a marine environment you need a Falcon

More information

Table of Contents 20 Series Exit Device

Table of Contents 20 Series Exit Device 20 Series Exit Device Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Features, Applications and UL Fire Door Ratings...

More information

Spectra Class. N6000 Series Exit Devices SECURITY DOOR CONTROLS. N6100 Rim Mount Exit Device. N6200 Surface Vertical Rod Exit Device.

Spectra Class. N6000 Series Exit Devices SECURITY DOOR CONTROLS. N6100 Rim Mount Exit Device. N6200 Surface Vertical Rod Exit Device. N6000 Series Exit Devices Spectra Class Rim Mount Surface Vertical Rod N6100 Rim Mount Exit Device For use on single doors or pair of doors with mullion 1-3/4"(44 mm) door thickness standard. Specify thickness

More information

3800 Series

3800 Series 3800 Series Hager 3800 Series mortise lock provides maximum security and durability for the harshest environments. With field reversible handing, ease of installation, and both escutcheon and sectional

More information

CK4400 Series. Standard Duty Cylindrical Knob Locksets

CK4400 Series. Standard Duty Cylindrical Knob Locksets Series Standard Duty Cylindrical Knob Locksets Applications Applications An outstanding combination of value and performance. Ideal for quality residential and light commercial buildings, such as: Fine

More information

F A L C O N T S E R I E S F E A T U R E S

F A L C O N T S E R I E S F E A T U R E S F A L C O N T S E R I E S Simply put, the Falcon T-Series lock is the most versatile lockset in the industry. This extra heavy duty lock can accept any manufacturer s cylinder, and the cylinder can easily

More information

Recessed. Touch bar exit devices

Recessed. Touch bar exit devices Recessed Touch bar exit devices Table of contents 3 2390 Concealed vertical rod device 4 Accessories 5 Power supply 6 Door application 7 How to order The Falcon difference Safety, security and uncompromising

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

W Series Cylindrical Lever. W Series cylindrical lever lock

W Series Cylindrical Lever. W Series cylindrical lever lock 38 W Series cylindrical lever lock Arrow W Series Grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. They re offered in a complete range of functions and finishes and

More information

Dor-O-Matic Exit Devices

Dor-O-Matic Exit Devices Dor-O-Matic Exit Devices T H E F A L C O N D I F F E R E N C E S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet

More information

ABS-AMERICAN BUILDING SUPPLY, INC. Von Duprin

ABS-AMERICAN BUILDING SUPPLY, INC. Von Duprin 22 - Rim Device 22 rim device for all types of single and double doors with mullion, UL listed for accident hazard installations. Covers stock hollow metal doors with 161 cutouts. Fits door stiles as narrow

More information

EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES

EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES PART 1 GENERAL 1.1 DESCRIPTION A. Work included: Entrance and vestibule

More information

ADAMS RITE. ADAMS RITE MANUFACTURING COMPANY Sliding Hardware/Exit Devices Series Turns

ADAMS RITE. ADAMS RITE MANUFACTURING COMPANY Sliding Hardware/Exit Devices Series Turns Sliding Hardware/ 1000 Series Turns Series 1000 turns are designed to operate Adams Rite MS 1847 deadlocks and latches. 1000-11 and 1000-21 have a rectangular escutcheon for mounting directly on the door.

More information

GRADE 2 HEAVY & STANDARD DUTY CYLINDRICAL LOCKS

GRADE 2 HEAVY & STANDARD DUTY CYLINDRICAL LOCKS GRADE 2 HEAVY & STANDARD DUTY CYLINDRICAL LOCKS Division 8 5 YEAR WARRANTY ANSI/BHMA 156.2 GRADE 2 SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10 TABLE OF CONTENTS How to Order

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

S U B M I T T A L T R A N S M I T A L

S U B M I T T A L T R A N S M I T A L 3679 S Huron Street, Suite 404 Englewood, Colorado 80110 Phone: (303) 789-4111 FAX: (303) 789-4310 S U B M I T T A L T R A N S M I T A L PROJECT: ENGINEER: OWNER: CONTRACTOR: Harold Thompson Regional WRF

More information

E-Plex 5700 Series E-PLEX

E-Plex 5700 Series E-PLEX PIN/PROX or Dual Credential Electronic Pushbutton Lock 3,000 Access Codes 30,000 Audit Events Access Schedules ANSI/BHMA Grade-1 Certified Features Access Control: No Wires: Locking Device Options: Number

More information

33A/35A Series. Exit devices

33A/35A Series. Exit devices 33A/35A Series Exit devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part

More information

7 LINE CYLINDRICAL LEVER LOCK

7 LINE CYLINDRICAL LEVER LOCK 7 LINE CYLINDRICAL LEVER LOCK Specifications Table of Contents Lever Designs, Features, Benefits & Applications........................... 1 Functions..........................................................

More information

20 Series. Exit Device

20 Series. Exit Device 20 Series Exit Device Copyright 2003, 2007, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Table Of Contents Page Features, Applications and UL

More information

33A/35A Series. Exit devices

33A/35A Series. Exit devices 33A/35A Series Exit devices Introduction Invest in longevity Von Duprin devices are engineered to add value over time. The robust materials and unique engineering add to the longevity, while the flexible

More information

7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS. 7KC Series. Medium Duty Cylindrical Locks Levers. BEST: Setting the Standard for Security

7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS. 7KC Series. Medium Duty Cylindrical Locks Levers. BEST: Setting the Standard for Security 7KC SERIES: MEDIUM DUTY CYLINDRICAL LOCKS LEVERS 7KC Series Medium Duty Cylindrical Locks Levers BEST: Setting the Standard for Security TABLE OF CONTENTS Features...2 Specifications...2 How To Order...3

More information

6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview

6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview 6200 Series Strikes for mortise or cylindrical devices Overview Features and benefits Von Duprin electric strikes are known for their reliability, durability and security. The 6200 Series strikes are designed

More information

98/99 Series. Exit devices

98/99 Series. Exit devices 98/99 Series Exit devices Introduction Exit devices are a critical part of the fire and life safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

Auxiliary Locks. Deadlocks and Deadbolts. Falcon Monarch Dor-O-Matic

Auxiliary Locks. Deadlocks and Deadbolts. Falcon Monarch Dor-O-Matic Auxiliary Locks Deadlocks and Deadbolts Falcon Monarch Dor-O-Matic T H E F A L C O N D I F F E R E N C E F A L C O N A U X I L I A R Y L O C K S S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S

More information

Simplex. Cylindrical Knob Series. Grade 1 Extra Heavy Duty Cylindrical Knob

Simplex. Cylindrical Knob Series. Grade 1 Extra Heavy Duty Cylindrical Knob Cylindrical Knob Series Grade 1 Extra Heavy Duty Cylindrical Knob SPXCK100 F82 Entry/Office Lock Push Button locking. Pushing button in inside knob locks outside lever until unlocked with key or turning

More information

Entry. Entry. Entry. Entry

Entry. Entry. Entry. Entry Functions x 9800/9M800 AC2 Exit Device Outside Inside Series/Function Type Function Description ED5200(A) & ED5200S(A) *9833 Without Cylinder Outside lever locked (freewheeling) except when in passage

More information

351 Series Door Closers Models: Finishes: BHMA BHMA Description

351 Series Door Closers Models: Finishes: BHMA BHMA Description Door Closers Adams Rite provides Surface Applied and Pocket Closers from Sargent for controlling the closing of The RITE Door. 351 Series The 351 Powerglide line of surface door closers has been engineered

More information

S200-SERIES. Interconnected Entrance Locks

S200-SERIES. Interconnected Entrance Locks Interconnected Entrance Locks Application Multi-family dwellings, hotel/motel, office and light duty commercial use. Performance Features Simultaneous retraction of deadbolt and latch for single-motion

More information

CL3200 Series. Security Bolt Lever Lockset

CL3200 Series. Security Bolt Lever Lockset Series Security Bolt Lever Lockset Applications Applications A heavy-duty, high-use lockset that combines the convenience of a barrierfree lever lockset with the security of a 1" (25mm) deadbolt in a single

More information

Non-handed, pre-assembled for left hand door installation easily changed in the field

Non-handed, pre-assembled for left hand door installation easily changed in the field PIN Access Electronic Pushbutton Lock 100 Access Codes Cylindrical Features Access Control: No Wires: Locking Device Options: Number of Codes: Handing: Programming: Key Override (Optional): Operation Modes:

More information

98/99 Series. Exit devices

98/99 Series. Exit devices 98/99 Series Exit devices Introduction Exit devices are a critical part of the fire and life safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

9849/9949 Concealed Vertical Cable Device

9849/9949 Concealed Vertical Cable Device 9849/9949 Concealed Vertical Cable Device Top Latch 9849/9949 Concealed Vertical Cable Device 32 Hex key comes standard on 9849/9949 Concealed Vertical Cable Devices 9849/9949 concealed vertical cable

More information

350/500 Heavy Wall TM Entrances 1

350/500 Heavy Wall TM Entrances 1 350/500 Heavy Wall TM Entrances 1 FEATURES Features 350 medium stile has 3-1/2" (88.9) vertical stile, 3-1/2" (88.9) top and 6-1/2" (165.1) bottom rail 500 wide stile has 5" (127) vertical stile, 5" (127)

More information

Cylinders & Key Blanks

Cylinders & Key Blanks Pat. 5,75,77 DO NOT DUPLICATE Pat. 5,75,77 Heavy-duty floor hinges available via special order. Contact our commercial project manager at 800-677-3383 for more details. Double acting steel mechanism Adjustable

More information

BULLDOG. Commercial Hardware

BULLDOG. Commercial Hardware BULLDOG Commercial Hardware Pricing & Specification Guide March 1, 2015 1. Table of Contents Bulldog Commercial Locksets Series 6900 Grade-2 Interconnect... Series 7200 Grade-1 Levers... Series 6200 Grade

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Built to protect Von Duprin products symbolize a commitment to safety and security. It s evident in the meticulous engineering behind every exit device. After all, keeping

More information

Table Of Contents. 30 Series Exit Device. On The Cover

Table Of Contents. 30 Series Exit Device. On The Cover 30 Series Exit Device Copyright 1999, 2001, 2004, 2008, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table Of Contents Page Features, Applications and UL Fire

More information

Grade 1 Heavy-Duty Cylindrical Locksets DORMA CL800 CK800

Grade 1 Heavy-Duty Cylindrical Locksets DORMA CL800 CK800 Grade 1 Heavy-Duty Cylindrical Locksets DORMA CL800 CK800 CL800/CK800 Series Table of Contents CL800/CK800 Grade 1 Cylindrical Locksets Features...................................... 3 Technical Details

More information

Retrofit Locks and Trim. Product Catalog

Retrofit Locks and Trim. Product Catalog Retrofit Locks and Trim Product Catalog Index General Information Falcon Lock Philosophy Quality locksets delivered on time is the Falcon Lock creed. Whether you re ordering Falcon Locks for a retrofit

More information

DC3000 Series. Door Closers

DC3000 Series. Door Closers Door Closers Table of Contents Applications 2 Features 3 & 4 Mountings 5 & 6 Door Closer Arms 7 & 8 Mounting Brackets 9 Brackets and Covers 10 Size and Handing 11 How to Order 12 Quick Codes 13 Helpful

More information

ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG

ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index EXIT DEVICES 5000 Series (Grade 2)...1-10

More information

GRADE 1 HEAVY DUTY CYLINDRICAL LOCKS

GRADE 1 HEAVY DUTY CYLINDRICAL LOCKS GRADE 1 HEAVY DUTY CYLINDRICAL LOCKS Division 8 10 YEAR WARRANTY ANSI/BHMA 156.2 GRADE 1 SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10 TABLE OF CONTENTS How to order Page 1

More information

a. Classroom function, Guardbolt deadlocks latchbolt b. Latchbolt retracted by either trim unless outside trim is locked by key

a. Classroom function, Guardbolt deadlocks latchbolt b. Latchbolt retracted by either trim unless outside trim is locked by key 08 70 00 HARDWARE.01 Finish Hardware requirements (PSU standard) Requirements A. A. Office Doors: 1. LocksLocksets and trim shall be one of the following: 1. similar to Sargent #8205 WTJ. No door closers,

More information

ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device

ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device Surface Vertical Rod Features ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device Features Handing Device is handed but easily field reversible.

More information

FEATURES & SPECIFICATIONS. 100% internal parts quality inspection provides security, reliability and durability

FEATURES & SPECIFICATIONS. 100% internal parts quality inspection provides security, reliability and durability For Doors... 1 ¼ Backset... 2 ¾ Lockcase... FEATURES & SPECIFICATIONS Heavy gauge zinc chromate steel Front... Heavy gauge steel x 1 ¼ x 3 / 32. Accommodates flat doors and doors beveled ⅛ in Armored Front...

More information

Electronic Standalone Pushbutton Locking

Electronic Standalone Pushbutton Locking Electronic Standalone Pushbutton Locking Now in Cylindrical, Mortise, Narrow Stile & Exit Trim Alarm Lock Trilogy T2 Standalone Digital Cylindrical Lock TM Leading #1 Access Control Lock in its Class year

More information

22 Series Exit Devices

22 Series Exit Devices 22 Series Exit Devices 22 Exit Device Finishes Color US Number BHMA Number Sprayed Aluminum SP28 689 Sprayed Dark Bronze SP313 695 2005 Ingersoll-Rand Co. May be copied for use with specification submittal.

More information

ED5000 Series. Pushpad Exit Devices

ED5000 Series. Pushpad Exit Devices Pushpad Exit Devices Overview Table of Contents Overview... 2 Product Series Features... 3 Applications and Listings... 4 SecureBolt Features... 6 Rim Features... 8 Surface Vertical Rod Features... 10

More information

98/99 Series. Exit devices

98/99 Series. Exit devices 98/99 Series Exit devices Introduction Exit devices are a critical part of the fire and life safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

HARDWARE SCHEDULE SHELDON CHILD CEVELOPMENT CENTER TOPEKA PUBLIC SCHOOLS PART OF ADDENDUM NO. 2 ITEM NO

HARDWARE SCHEDULE SHELDON CHILD CEVELOPMENT CENTER TOPEKA PUBLIC SCHOOLS PART OF ADDENDUM NO. 2 ITEM NO HARDWARE SCHEDULE SHELDON CHILD CEVELOPMENT CENTER TOPEKA PUBLIC SCHOOLS PART OF ADDENDUM NO. 2 ITEM NO. 2.005 087100-1 HARDWARE SCHEDULE Hardware Set No. 01 Sgl. Door 01 1 ea continuous hinge 224HDxEPT

More information

GRADE 1 ELECTRIFIED CYLINDRICAL & UNIT LOCKS

GRADE 1 ELECTRIFIED CYLINDRICAL & UNIT LOCKS GRADE ELECTRIFIED CYLINDRICAL & UNIT LOCKS LAK Function: Specifications: Features: Locked on the outside only. The 00mA @ VDC Vandal resistant clutch lever release inside lever is always unlocked for 9/6

More information

E-Plex 5700 Series E-PLEX

E-Plex 5700 Series E-PLEX PIN/PROX or Dual Credential Electronic Pushbutton Lock 3,000 Access Codes 30,000 Audit Events Access Schedules ANSI/BHMA Grade-1 Certified Features Access Control: No Wires: Locking Device Options: Number

More information

MODELS TRUE WOOD DOOR OPERATIONAL HARDWARE EXIT DEVICE MODELS LEVER X LEVER MODELS DOORS WITH FLUSHBOLTS:

MODELS TRUE WOOD DOOR OPERATIONAL HARDWARE EXIT DEVICE MODELS LEVER X LEVER MODELS DOORS WITH FLUSHBOLTS: MODELS EXIT DEVICE MODELS Concealed Less Bottom Rod Type D3976 Inset Exit Device Concealed Top Latch Only Rated Doors (Paired) LEVER X LEVER MODELS D3944 Classroom Function D3945 Passage Function D3946

More information

268, 269 & 278. Concealed Door Closers

268, 269 & 278. Concealed Door Closers 268, 269 & 278 Concealed Door Closers Copyright 2004-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents General Information....3 268 Features and Benefits...4

More information