Datasheet ERHARD ECLI butterfly valve
|
|
- Susan Wilkins
- 5 years ago
- Views:
Transcription
1 Datasheet ERHARD ECLI butterfly valve
2 Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed in the ancient world and is still used in many applications today thanks to its sophisticated technology and, above all, the free passage it provides when in the open position. The other is the butterfly valve, where a sturdy valve disc is moved between the open and closed position in the media flow, and which has a much smaller design height than a gate valve. Where high pressures and large nominal sizes are involved, double-eccentric butterfly valves such as the ERHARD ROCO Premium butterfly valve are mainly used, since their design guarantees safe opening and closing even under extreme conditions as well as reliable cavitation protection. Quite often, however, the demands made on shut-off valves are simple e. g. where only small pressures or sizes are required or if the valve is only rarely used, such as is the case with servicing valves up- or downstream from control valves. The is the perfect solution here, since it combines the small design height of a butterfly valve with the cost advantages of a gate valve all in a shorter face-to-face dimension. The can be used for applications including cold water and drinking water as well as general industrial applications. Thanks to numerous material options for the valve disc and seal, special application cases can also be realised without any problems. They are available in nominal sizes of DN 32 to DN 300 in numerous versions and can be combined with numerous drive options. 2
3 the overview Materials and finishes fact file Body: Spheroidal graphite cast iron EN-JS1030 Valve disc: central mounting, made of spheroidal graphite cast iron EN-JS1030 or stainless steel , further options on request Valve shaft: steel Shaft bearing: nylon and PTFE Profiled sealing ring: EPDM for drinking water or NBR for gas, further options on request Corrosion protection: epoxy resin coating with ERHARD EKB fusion bonded epoxy for the body as well as valve discs made of cast iron, layer thickness at least 150 µm, further coatings on request Certificate: DVGW approval for drinking water Hydraulic data Flow depending on the opening angle 100 Flow in per cent Opening angle in degrees 90 Calculation of the pressure loss with liquids Q Δp = Y ( Kv) 2 Δp in kg/cm 2 Q in m 3 /h Y relative density (in relation to water) Kv Flow coefficient according to the table on the right DN Kv 40/
4 Perfect solutions in every installation situation s are available in two versions, guaranteeing a perfect connection to the pipe: Wafer type for clamping between the two flange ends of the pipe [1]. Lug type with threaded eyelets for two-sided flange-mounting to the pipe [2]. Wafer type 1 2 Lug type Wafer and Lug type: DN 32 to DN 300 Wafer type for clamping Lug type for flange-mounting 4
5 All sizes at a glance Size DN A B E l J SW Feather key Connecting flange Bore hole acc. to PN 10 Bore hole acc. to PN 16 ISO a b K d3 d d5 d6 M Anz d5 d6 M Anz Wafer type ,5 F ,5 F ,5 F ,5 F ,5 F ,5 F ,5 F ,5 F ,5 F F F12 Lug type ,5 F M M ,5 F M M ,5 F M M ,5 F M M ,5 F M M ,5 F M M ,5 F M M ,5 F M M ,5 F M M F M M F M M
6 Low torques Max. size DN pressure 32/
7 Drive selection ECLI Pro Gear Alu gear box with handwheel Typ X size DN ISO 5211 Height Nm Type Connection Turn/stroke Spigot ø Handwheel ø Weight cpl. in kg 32 F X-21 F05 / ,4 40 F X-21 F05 / ,4 50 F ,3 X-21 F05 / ,4 65 F ,4 X-21 F05 / ,1 80 F ,5 X-21 F05 / ,9 100 F X-21 F05 / ,9 125 F ,8 X-21 F05 / ,4 150 F ,5 X-21 F05 / ,4 200 F X-41 F07 / ,6 250 F ,5 X-41 F07 / ,6 300 F ,5 X-61 F10 / , ,7 ECLI Pro Gear cast iron gear box with handwheel Typ Q size DN ISO 5211 Height Nm Type Connection Turn/stroke Spigot ø Handwheel ø Weight cpl. in kg 32 F Q-200 S F05 / ,5 40 F Q-200 S F05 / ,5 50 F ,3 Q-200 S F05 / ,5 65 F ,4 Q-200 S F05 / ,2 80 F ,5 Q-200 S F05 / F Q-200 S F05 / F ,8 Q-200 S F05 / ,5 150 F ,5 Q-200 S F05 / ,5 200 F Q-400 S F07 / F ,5 Q-400 S F07 / F ,5 Q-800 S F10 /
8 Drive selection ECLI AUMA SQ, 10 bar* size DN ISO 5211 Height Nm AUMA Type Positioning time Hz Dimensions square ISO 5211 mm Depth Handwheel ø Weight cpl. in kg 32 F SQ F ,5 40 F SQ F ,5 50 F ,3 SQ F F SQ F ,5 80 F SQ F F SQ F F ,5 SQ F07 / ,5 150 F ,8 SQ F07 / ,5 200 F ,5 SQ F F SQ F ,5 300 F SQ F * all torques plus safety of 1,3 for e-drives ECLI AUMA SQ, 16 bar size DN ISO 5211 Height Nm AUMA Type Positioning time Hz Dimensions square ISO 5211 mm Depth Handwheel ø Weight cpl. in kg 32 F SQ F ,5 40 F SQ F ,5 50 F ,3 SQ F F ,4 SQ F ,5 80 F ,5 SQ F F SQ F F ,8 SQ F07 / ,5 150 F ,5 SQ F ,5 200 F SQ F F ,5 SQ F ,5 300 F ,5 SQ F
9 Drive selection ECLI with handlever, 16 bar size DN Connection ISO 5211 Height Nm Length in mm 32 F F F , F , F , F F , F , F F ,5 not available 300 F ,5 not available ECLI AUMA SA + GS gear box, 16 bar size DN ISO 5211 Height Nm Gear box Connection ISO 5211 Depth Turn/ stroke Operating time Connection F10 Actuator ISO 5211 sec Handwheel ø mm Weight cpl. in kg 32 F GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,6 40 F GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,6 50 F ,3 GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,6 65 F ,4 GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,3 80 F ,5 GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,1 100 F GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,1 125 F ,8 GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,6 150 F ,5 GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,6 200 F GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,1 250 F ,5 GS 50.3 F ,75 SA07.2/45 F10 B4 D= ,1 300 F ,5 GS 63.3 F ,75 SA07.6/22 F10 B3 D= ,1 9
10 Drive selection Pneumatic drive ECLI-Festo DAPS, 10 bar operating pressure, 6 bar control pressure size DN ISO 5211 Height Nm Type Connection ISO 5211 Depth 32 F DAPS R-F0305 F ,2 40 F DAPS R-F0305 F ,2 50 F ,3 DAPS R-F0305 F ,2 65 F DAPS R-F0305 F ,2 80 F DAPS R-F0507 F ,5 100 F DAPS R-F0507 F ,5 125 F ,5 DAPS R-F0507 F ,5 150 F ,8 DAPS R-F0507 F ,5 200 F ,5 DAPS R-F0507 F ,3 250 F DAPS R-F0710 F ,3 300 F ,6 DAPS R-F12 F ,5 ECLI-Festo DAPS, 16 bar, 6 bar control pressure size DN ISO 5211 Height Nm Type Connection ISO 5211 Depth 32 F DAPS R-F0305 F ,2 40 F DAPS R-F0305 F ,2 50 F ,3 DAPS R-F0305 F ,2 65 F ,4 DAPS R-F0507 F ,5 80 F ,5 DAPS R-F0507 F ,5 100 F DAPS R-F0507 F ,3 125 F ,8 DAPS R-F0507 F ,5 150 F ,5 DAPS R-F0507 F ,3 200 F DAPS R-F0710 F ,8 250 F ,5 DAPS R-F0710 F ,3 300 F ,5 DAPS R-F ,5 all torques plus safety of 1,2 for pneumatic drive at 6 bar control pressure 10
11 Drive selection ECLI-BAR GTD, 10 bar, 6 bar control pressure Connection ISO size DN ISO 5211 Height Nm Type 5211 Depth 32 F GTD-058 F F GTD-058 F F ,3 GTD-058 F F GTD-068 F F GTD-078 F F GTD-078 F F ,5 GTD-078 F F ,8 GTD-088 F F ,5 GTD-110 F F GTD-127 F F ,6 GTD-163 F ECLI-BAR GTD, 16 bar, 6 bar control pressure Connection ISO size DN ISO 5211 Height Nm Type 5211 Depth 32 F GTD-058 F F GTD-058 F F ,3 GTD-058 F F ,4 GTD-078 F F ,5 GTD-078 F F GTD-088 F F ,8 GTD-088 F F ,5 GTD-098 F F GTD-115 F F ,5 GTD-127 F F ,5 GTD-185 F14 2) all torques plus safety of 1,2 for pneumatic drive at 6 bar control pressure 11
12 Screw length for mounting E = face-to-face L = thread rod length T = screw length M = thread size No = number of bolts Wafer type Lug type PN 10 PN 16 size Screw length for flange 1 and Wafer type Screw length for flange 2 Screw length for Lug type Screw length for flange 1 and Wafer type Screw length for flange 2 Screw length for Lug type Thread rod Screw Screw Nut Screw Thread rod Screw Screw Nut Screw DN E L M Nº T M Nº L M Nº M Nº T M Nº L M Nº T M Nº L M Nº M Nº T M Nº
13 Installation conditions size DN H mm x mm Face-to-face E mm Diameter disc ø B mm Inner diameter of the pipe C min mm C max mm 32/40 21,7 3, , , ,5 3, , , ,6 9, , , ,7 16, , , ,2 25, , ,7 34, , ,9 46, , , ,3 69, , , ,7 90, , , ,3 110, ,5 ø B H ø C x E 13
14 Notes on installation and mounting The following points must be heeded when mounting ERHARD ECLI butterfly valves in pipes: The distance between the flanges must be large enough for the butterfly valve to be pushed in without displacing the seals [1] or having longitudinal forces acting on them. The valve disc must be in the slightly open position shown in the drawing. The butterfly valve must not be either closed or fully open during mounting. The flanges must be mutually parallel in order to guarantee perfect contact with the butterfly valve after tightening. When the butterfly valve is already mounted, the flanges must not be welded with the pipe since the heat produced by the welding process can damage the seals. The butterfly valve is opened completely before the flange screw attachment is tightened [2] in order to guarantee trouble-free operation. s can be installed in both vertical and horizontal pipes and are fully functional independently of the direction of flow. For sizes larger than DN 300 we recommend a horizontal position for the drive shaft. 1 2 Used as an end valve, consider the following operating pressure size DN Max. allowed operating pressue, used as end valve, in bar Wafer type Lug type
15 Drive options Handlever Gear box with handwheel / elect. actuator Rotary actuator Pneumatic drive Extensions with handwheel or other drive 15
16 Weights size DN Wafer type without drive, in kg Lug type without drive, in kg 32/40 1,5 3,5 50 2,2 3, ,2 80 3, , ,3 8, ,5 10,
17 TALIS is the undisputed Number One for water transport and water flow control. TALIS has the best solutions available in the fields of water and energy management as well as for industrial and communal applications. We have numerous products for comprehensive solutions for the whole water cycle from hydrants, butterfly valves and knife gate valves through to needle valves. Our experience, innovative technology, global expertise and individual consultation processes form the basis for developing long-term solutions for the efficient treatment of the vitally important resource water. ERHARD GmbH & Co. KG Postfach 1280 D Heidenheim Meeboldstrasse 22 D Heidenheim Telefon TeleFax Internet Note: Specifications may be changed without notification at any time. Copyright: No copying without express written permission of ERHARD ERHARD is a Registered Trademark EN (04/15)
ERHARD is a company of. ERHARD ECLI butterfly valve
ERHARD is a company of ERHARD ECLI butterfly valve The cost-effective solution for simple shut-off tasks Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial
Datasheet ERHARD SWING check valve
Datasheet Non-return valve with perfect self-centring The is a non-return valve that can be flexibly used for water and sewage. Featuring a 93 % opening value, it guarantees an extremely low zeta value,
Data sheet ERHARD non slam nozzle check valve
Data sheet ERHARD non slam nozzle check valve 2 ERHARD non slam nozzle check valve ERHARD non slam nozzle check valve The innovative non-return valve for maximum economy An optimised flow cross-sectional
ERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve
ERHARD is a company of Datasheet ERHARD ERK tilting-disc check valve The universal check valve with double excentric valve disc A key component of the is the valve disc which has a freely oscillating,
ERHARD is a company of. Datasheet ERHARD ball valve
ERHARD is a company of Datasheet The economical solution for high pressures and high flow rates Especially with high flow velocities up to 5 m/s and pressure ratings up to PN 4, the offers the ideal and
ERHARD is a company of. Datasheet ERHARD ABS Premium service valve
ERHARD is a company of Datasheet ERHARD ABS Premium service valve ERHARD ABS Premium service valve The innovative tapping systems With the new it has been possible to reduce the number of required models
ERHARD is a company of. Data sheet ERHARD needle valves
ERHARD is a company of Data sheet ERHARD needle valves ERHARD RKV needle valves The innovative needle valve with the four positive points Based on decades of experience in the design and production of
Our products for water transmission Double-eccentric butterfly valves Air valves Non-return valves Connection systems
Water transmission Lengths of over 100 kilometres and nominal widths of over DN 100 are not unusual for large scale water transmission systems. Often they are installed as parallel pipelines. They ensure
UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
ERHARD is a company of. Dynamically into a new dimension the new Butterfly valve ERHARD ROCO wave
ERHARD is a company of Dynamically into a new dimension the new Butterfly valve ERHARD ROCO wave A new chapter of the success story Johannes Erhard, who founded our company more than 140 years ago, would
UNIJOINT is a company of. UNIJOINT Dismantling Joints
UNIJOINT is a company of UNIJOINT Dismantling Joints Essential for straightforward and secure installation Source: ABB Dismantling joints play a decisive role in the design and layout of pipelines and
Pneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
Industrial water applications
Industrial water applications There is hardly an industrial production process that can manage without water, for which reason a reliable and cost-effective supply of drinking, industrial and cooling water
ERHARD is a company of. Data sheet ERHARD ROCO wave
ERHARD is a company of Data sheet Content Product range (DN / PN) Fields of applications Area of use Materials Coating systems Concept of sealing Shaft bearing Gear Drive variants Approvals Weight Zeta
Butterfly valves. Introduction. Made of ductile cast iron
Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
ARI-ZESA / ARI-GESA / THEA Butterfly valves
ARI-ZESA - Fig. 012 - Free of maintenance butterfly valve with elongated eyelets - soft sealed ARI-GESA - Fig. 013 - Free of maintenance butterfly valve with threaded eyelets - soft sealed / THEA Butterfly
Talbot Pushfit Service Fittings
Talbot Pushfit Service Fittings Talbot Pushfit Talbot Pushfit fittings are quick and easy to use, with no nuts to loose or leave undone. Simply push the pipe into the fitting, The grip and seal on the
Butterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
Page 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
Butterfly Valve APORIS 16. DN PS 16 bar. Type Series Booklet
Butterfly Valve APORIS 16 DN 300-2000 PS 16 bar Type Series Booklet Legal information/copyright Type Series Booklet APORIS 16 All rights reserved. The contents provided herein must neither be distributed,
ERHARD is a company of. ERHARD ERU K1 knife gate valve
ERHARD is a company of ERHARD ERU K1 knife gate valve DN 50 600 PN 4 10 ERHARD ERU K1 tried and tested hundreds of thousands of times. Versatile: ERHARD ERU K1 is available in numerous designs. KKnife
General information Gate valves
General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard
BELGICAST is a company of. Butterfly Valves
BELGICAST is a company of Butterfly Valves TALIS the number one choice for all valve-related products. TALIS is the major brand whenever products and services are needed for the water cycle. The brands
Reliable Precision ERU Knife Gate Valve K1
Reliable Precision ERU Knife Gate Valve K1 ERHARD ERU Knife Gate Valve K1: Robust, resilient-seated knife gate valves made from cast iron for isolation and control functions. Numerous design options available.
Lined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
BELGICAST is a company of. Butterfly Valves
BELGICAST is a company of Butterfly Valves TALIS the number one choice for all valve-related products. TALIS is the major brand whenever products and services are needed for the water cycle. The brands
The HYDROMAT. Technical Information Since The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg
The HYDROMAT Technical Information Since 1953 The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg Product overview + Supply capability Nominal diameters Nominal pressure
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Application Tight closing, double eccentric butterfly valve for process engineering and plants with industrial requirements Nominal size DN 80 to DN 400
Welcome to the world of TALIS
Valve Catalogue Welcome to the world of TALIS Contents Our job is to protect water, the element that is vital for life. Together with our customers and partners, we are living up to this responsibility
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
Nero Needle Valves. Nero Needle Valves
Nero Needle Valves Main Characteristic The needle valve is mainly designed for water flow rate and pressure regulation in a pipeline. The regulation takes place thank the axial movement of the piston,
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
BV BAKIO Soft Sealing Gate Valve
TALIS in the process of innovation and continuous improvement has designed a new soft sealing gate valve named BAKIO. The process has been based on the development of the features that our customers perceive
Welcome to the world of TALIS
Valve Catalogue Welcome to the world of TALIS Our job is to protect water, the element that is vital for life. Together with our customers and partners, we are living up to this responsibility all over
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a
Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a Application Control butterfly valve for use in process engineering and industrial applications to meet high demands Suitable for liquids,
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
BR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
Operating manual Keula gate valves DN PN10/16
Operating manual Keula gate valves DN40-400 PN10/16 Page - 1 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Manufacture and sale of the slide valves: Slide valves according
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
BrewSeal butterfly valves Wafer and lugged
Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.
BROEN Butterfly valves
BROEN Butterfly valves Triple eccentric butterfly valves BROEN Butterfly valves Application Butterfly valves type BROEN are used as a shut-off valves and regulating valves in many different applications:
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
Globe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
Maxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
Wafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
Tank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
Tilting-disc Check Valves Short Body
Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40
DOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES. TIS asia
DOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES VALVES DEDICATED TO THE WATER DISTRIBUTION NETWORK AND HYDROPOWER SECTOR WE DO NOT SELL JUST VALVES, WE SELL A SOLUTION FOR THE EFFICIENCY OF THE WATER
with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
ISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
ERHARD is a company of. ERHARD butterfly valves
ERHARD is a company of ERHARD butterfly valves Butterfly valves for the requirements of tomorrow The purpose of butterfly valves is to reliably start and stop the flow of media safely and at any time.
Control valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Butterfly valves Plastic and Metal
Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement
Maxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 110 C ( 130 C temporarily ) Max Pressure
BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR
1121-1125 BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 1121 to 1125 wafer butterfly valves are dedicated to the automatic shut-off of medium pressure industrial fluids lines up to
Triple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
RESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
Series 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
BUTTERFLY VALVES + SA ACTUATOR
1150-1183 BUTTERFLY VALVES + SA ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron. The different
MAMMOUTH Type Series Booklet
Butterfly Valve MAMMOUTH DN 1050-4000 PS 25 bar Type Series Booklet Legal information/copyright Type Series Booklet MAMMOUTH All rights reserved. The contents provided herein must neither be distributed,
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
Maxifluss Rotary Plug Valves VETEC Types 72.3/R and 72.4/R
Maxifluss Rotary Plug Valves VETE Types 72.3/R and 72.4/R Application Double-eccentric control valve for process engineering and industrial applications Nominal sizes DN 25 to 400 NPS 1 to 1 Nominal pressures
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
Uniwat. Resilient Seated Gate Valves
Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications
VAG Butterfly Valves
VAG Butterfly Valves VAG EKN Butterfly Valve H-Series New for the highest requirements Runners Pressure compensation channels O-ring seal Hydrodynamic disk Automatic sealing system Retaining ring Tapered-pin
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
Bonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
BOAX-B Mat E. Type Series Booklet
Butterfly Valve with Electric Actuator BOAX-B Mat E PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 and 300 Design to EN 593 and ISO 10631 Type Series Booklet Legal information/copyright Type Series Booklet
BFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
Product Range. Products for all industrial applications
Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric