3M Boron Carbide Blasting Nozzles Performance at full blast
|
|
- Adele Cameron Greene
- 5 years ago
- Views:
Transcription
1 3M Boron Carbide Blasting Nozzles Performance at full blast Blasting nozzles of 3M Boron Carbide and 3M Silicon Carbide have a proven track record over decades of use, due to their extreme wear resistance, high quality, uniform blasting performance and long service life.
2 2 3M Boron Carbide Blasting Nozzles 3M Boron Carbide Blasting Nozzles Introduction 3M Technical Ceramics (formerly ESK Ceramics GmbH & Co. KG) is a leading manufacturer of advanced ceramic products and materials for industrial applications. For over six decades, 3M Technical Ceramics has manufactured boron carbide blasting nozzles for a wide variety of standard and specialized applications. Ongoing research and market analysis have enabled us to systematically expand our range of blasting nozzles and offer technologically sophisticated products of the highest quality. Typical Applications for 3M Boron Carbide Blasting Nozzles Prepare surface for coating or bonding Remove production contaminants Deflashing and deburring of molded parts Finalize surfaces to matte or frosted finish Shot peening Boron carbide is one of the hardest engineering materials available only diamond and cubic boron nitride are harder giving it exceptional abrasion resistance. Used correctly, 3M Boron Carbide Blasting Nozzles have exceptionally long service life, even in applications using extremely hard abrasives such as corundum and silicon carbide. Density as low as 2.50 g/cm 2 Minimal wear in demanding applications ow air consumption through minimal widening of the bore Durability that pays off Consistent blasting performance Exceptionally long service life High performance with a variety of abrasive media Due to its exceptionally high abrasion resistance, boron carbide boasts an unbeatable price/performance ratio. When costs per time unit of blasting are compared, 3M boron carbide blasting nozzles may offer a more cost-effective alternative to nozzles made of silicon carbide or hard metal Boron Carbide Silicon Carbide Aluminum Oxide Hard Metal KO3 Silicon Nitride Material Comparison: Relative Cost per Time Unit
3 3M Boron Carbide Blasting Nozzles 3 Table of Contents 3M Boron Carbide Blasting Nozzles Nozzles...4 Accessories...9 Inserts Miscellaneous Shapes...14 Product Key The product designation consists of a combination of numerals and letters. This code provides the following information: Product, dimensions, form, connection, insert material and jacket material. Order example: Nozzle 0095/0680 NKBS Nozzle Order Number Nozzle 0095/0680 NKBS Nozzle 0095/0681 NKBS Nozzle 0095/0682 NKBS Nozzle N K B S Product Type Nozzle, Insert, ance, Blast head, Air nozzle, ead-in nozzle Inner Diameter in 1/10 mm (4 digits) 0095 = 9.5 mm Overall ength in 1/10 mm (4 digits) 0680 = 68 mm Nozzle Internal Shape Type N Straight aval W Angle or curved and value of angle S ateral B Wide-jet Connection Type G F Clamping K Coupling S Hose X None/Other Insert Material F 3M Silicon Carbide B 3M Boron Carbide Material A Aluminum S Steel
4 4 3M Boron Carbide Blasting Nozzles Nozzles 6 15 Ø30 Ø38 Nozzle with Connector ength Nozzle 0040/0560 NKBS Nozzle 0060/0860 NKBS Nozzle 0080/0860 NKBS Nozzle 0100/0860 NKBS Nozzle 0100/1000 NKBS Nozzle 0120/0860 NKBS Nozzle 0120/1000 NKBS * See ead-in Nozzle with Connector section below for suitable type. Steel (only with ead-in Nozzle*) All K-types 4 Ø38 I D Ø25 Ø34 ead-in Nozzle with Connector ength ead-in Nozzle 0060/0400 NKBS ead-in Nozzle 0080/0400 NKBS ead-in Nozzle 0100/0400 NKBS ead-in Nozzle 0120/0400 NKBS ead-in Nozzle 0140/0400 NKBS For your Information: Nominal of ead-in nozzle should be the same as nominal of subsequent nozzle. If exact is not available, ead-in nozzle should be chosen with nearest bigger dimension. Steel All K-types Ø26.4 Nozzle with External ength Connection Nozzle 0060/0860 NGBS G 3/4" Nozzle 0080/0860 NGBS G 3/4" Nozzle 0100/0860 NGBS G 3/4" Connecting Piece (only with Connecting Piece) Steel All K-types
5 3M Boron Carbide Blasting Nozzles 5 Nozzles, continued 1 Ø23.7 Ø20 2 Nozzle for Clamping Type ength Nozzle 0060/0660 NFBS Nozzle 0070/0660 NFBS Nozzle 0080/0660 NFBS Nozzle 0095/0680 NFBS Steel Angle R120 Ø28 Angled Blast Nozzle 40 with 3/4" External ength Nozzle 0060/0000 W40GBS Nozzle 0080/0000 W40GBS Nozzle 0100/0000 W40GBS Connecting Piece (only with Connecting Piece) Steel All K-types
6 Ø34 Ø34 Ø34 Ø38 6 3M Boron Carbide Blasting Nozzles Nozzles, continued Ø26 Ø26 Ø30 Ø38 Ø30 Ø aval Nozzle with Connector Type ength Nozzle 0080/1000 KBS Steel All K-types* Nozzle 0100/1000 KBS Steel All K-types* Nozzle 0080/1650 KBA Aluminum All K-types Nozzle 0100/1650 KBA Aluminum All K-types Nozzle 0120/1650 KBA Aluminum All K-types * See ead-in Nozzle with Connector section on page 4 for suitable type. Rubber shock protector 25 Ø42 aval Nozzle with 2" External ength Nozzle 0080/1650 GBA Nozzle 0080/1650 GBA Nozzle 0100/1650 GBA Nozzle 0100/1650 GBA Nozzle 0120/1650 GBA Nozzle 0120/1650 GBA Aluminum ,
7 DN DN 3M Boron Carbide Blasting Nozzles 7 Nozzles, continued 1 DN 2 3 aval Nozzle for Direct Hose Connection Type ength Tube Nominal Diameter DN Nozzle 0080/1000 SBS Steel Nozzle 0100/1000 SBS Steel Nozzle 0100/1100 SBS Steel Nozzle 0120/1100 SBS Steel Nozzle 0100/1650 SBA Aluminum Nozzle 0120/1650 SBA Aluminum 32 B 6 15 A Ø30 Ø3 0 Ø38 Wide-jet Nozzle with Connector Outlet B Outlet A ength Nozzle 0150/0860 BKBS Nozzle 0160/0860 BKBS * See ead-in Nozzle with Connector section on page 4 for suitable type. Steel (only with ead-in Nozzle) All K-types*
8 8 3M Boron Carbide Blasting Nozzles Nozzles, continued Ø54 Blast Head with 4 Outlets and 1" Internal ength Blasting Head 0080/0700 S4GBS Steel Ø28 Ø30 Blast Head with 2 ateral Outlets with G 3/4" Internal ength Nozzle 0100/0600 S2GBS Steel
9 3M Boron Carbide Blasting Nozzles 9 Nozzle Accessories 6 36 Ø30 Ø34 Connecting Pieces/Adapters ength Connection 1 Connection 2 (Nozzle) Connecting Piece K - IG G 3/4" Coupling G 3/4" Steel All K-types Note: this adapter allows 3/4 thread nozzles to be used Nozzle Holder with 2" Internal and Hose Connection ength Material Connection Nozzle Connection Tube DN Nozzle Holder IS25 - IG 2" Aluminum 2" Nozzle Holder IS32 - IG 2" Aluminum 2" 32 8
10 DN M Boron Carbide Blasting Nozzles Nozzle Accessories, continued Ø34 Nozzle Holder K-type for Hose Connection ength Material Connection Nozzle Connection Tube DN Suitable Plastic Nut Nut Ø27 M45* Plastic Nozzle Holder IS16 - AG M45* Aluminum Coupling , Nozzle Holder IS19 - AG M45* Aluminum Coupling , Nut Ø35 M45* Plastic Nozzle Holder IS25 - AG M45* Aluminum Coupling , Nozzle Holder IS32 - AG M45* Aluminum Coupling , Nozzle Holder K-type for Hose Connection ength Material Connection Nozzle Connection Tube DN Suitable Plastic Nut Nut Ø27 G 1 1/ Plastic Nozzle Holder AS25 - AG G 1 1/ Steel Coupling , Nut Ø35 G 1 1/ Plastic Nozzle Holder AS32 - AG G 1 1/ Steel Coupling ,
11 3M Boron Carbide Blasting Nozzles 11 Nozzle Inserts 3 Ø6.5 Fine Jet Insert ength Insert 0008/0310 NB Insert 0012/0310 NB Insert 0018/0310 NB Short Insert ength Insert 0030/0520 NB Insert 0040/0520 NB Insert 0050/0520 NB Insert 0060/0630 NB Insert 0070/0630 NB Insert 0080/0630 NB Insert 0100/0630 NB Insert with Small ength Insert 0060/0820 NB Insert 0080/0820 NB Insert 0100/0820 NB Insert 0110/0820 NB Insert 0120/0820 NB Insert 0130/0820 NB Insert 0140/0820 NB
12 12 3M Boron Carbide Blasting Nozzles Nozzle Inserts, continued ong Insert with Small ength Insert 0060/0950 NB Insert 0080/0950 NB Insert 0100/0950 NB Insert 0120/0950 NB Insert with arge ength Insert 0060/0820 NB Insert 0080/0820 NB Insert 0100/0820 NB Insert 0120/0820 NB Short aval Insert ength Insert 0060/0950 B Insert 0080/0950 B Insert 0100/0950 B
13 3M Boron Carbide Blasting Nozzles 13 Nozzle Inserts, continued 1 ong aval Insert ength Insert 0060/1360 B Insert 0080/1360 B Insert 0080/1600 B Insert 0080/1600 B Insert 0100/1600 B Insert 0100/1600 B Insert 0120/1600 B Insert 0120/1600 B Insert 0140/1600 B Insert 0140/1600 B B A Wide-Jet Insert Outlet Outlet ength Insert 0080/0820 BB Insert 0080/0820 BB
14 14 3M Boron Carbide Blasting Nozzles Miscellaneous Shapes 1 Total Insert ength ength Insert 0025/0300 NB Insert 0030/0150 NB Insert 0064/0413 NB Insert 0063/0508 NB Insert 0079/0508 NB Insert 0080/0600 NB Insert 0095/0760 NB Insert 0127/0760 NB R4 ength Insert 0035/0380 NB ength 1/ Insert 0095/0700 B
15 3M Boron Carbide Blasting Nozzles Benefits of 3M Boron Carbide Blasting Nozzles Proven expertise For nearly 100 years, 3M Technical Ceramics has been a competent development partner and reliable supplier of series products for challenging applications worldwide. A one-stop supplier All production processes, from raw material to final component, are performed at our fully dedicated, ISO 9001 and certified facilities. Our manufacturing processes are optimized for quality, efficiency and consistency helping ensure reliable and repeatable product performance. Our customers our partners Our technical specialists are dedicated to developing new and innovative solutions to help solve your toughest challenges. We have more than 90 years of experience in designing and manufacturing cutting-edge ceramic solutions, and we continually work to develop new applications for ceramic materials in cooperation with our customers and with research institutions. Product is manufactured and sold by 3M Technical Ceramics, Zweigniederlassung der 3M Deutschland GmbH. Warranty and imitation of iability : Many factors beyond our control and uniquely within user s knowledge and control can affect the use and performance of the product in a particular application. User is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user s method of application. User is solely responsible for evaluating third party intellectual property rights and for ensuring that user s use of the product does not violate any third party intellectual property rights. Unless a different warranty is specifically stated in the applicable product literature or packaging insert, we warrant that each product meets the applicable product specification at the time we ship the product. WE MAKE NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPIED, INCUDING, BUT NOT IMITED TO, ANY IMPIED WARRANTY OR CONDITION OF MERCHANTABIITY OR FITNESS FOR A PARTICUAR PURPOSE OR ANY IMPIED WARRANTY OF NON-INFRINGEMENT OR ANY IMPIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEAING, CUSTOM OR USAGE OF TRADE. The quality of our products is warranted under our General Terms and Conditions of Sale as now are or hereafter may be in force. imitation of iability: Except where prohibited by law, we will not be liable for any loss or damages arising from the product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. We accept liability for intent and gross negligence. We are also liable for any culpable breach of major contractual obligations; however, if a breach of major contractual obligations is due to negligence, our liability is limited to the foreseeable damage associated with this type of contract. This does not affect our liability for culpable fatal or bodily injury or damage to health; this also applies to liability under the Product iability Act ( Produkthaftungsgesetz ). Other claims for compensation are excluded. Technical Information: Technical information, recommendations, and other statements contained in this document or provided by us are based on tests or experience that we believe are reliable, but the accuracy or completeness of such information is not guaranteed. Such information is intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any of our or third party intellectual property rights is granted or implied with this information. 3M Technical Ceramics Zweigniederlassung der 3M Deutschland GmbH Max-Schaidhauf-Straße Kempten, Germany T +49 (0) F +49 (0) info.technical-ceramics@3m.com / Technical-Ceramics The management system has been certified according to DIN EN ISO 9001, DIN EN ISO 50001, DIN EN ISO Please recycle. Printed in Germany. 3M All rights reserved. Issued: 06/ HB M is a trademark of 3M. Used under license by 3M subsidiaries and affiliates.
3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels
3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to grind. It s grinding reinvented. Featuring NEW cubitron ii cut & grind wheels Grinding Reinvented 3M TM Cubitron TM II bonded abrasive
More information3M TM Dyneon TM Fluoroplastics. Product Comparison Guide.
3M TM Dyneon TM Fluoroplastics Product Comparison Guide. Characteristics 3M Dyneon Fluoroplastics. Nominal values, not for specification purposes 1) Melt Index is measured at the following conditions 265
More information3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED.
3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 13020160.indd 1 2/8/13 9:46 PM GRINDING REINVENTED 3MTM CubitronTM II bonded abrasive grinding and
More informationGM Specification Annual Test Data
GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing
More informationGM Specification Annual Test Data
GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing
More informationIncreasing load transfer in bolted joints
Increasing load transfer in bolted joints with 3M Friction Shims January 2017 3M Advanced Materials Division Load transfer in bolted joints 1. Shear Joint: the applied loading is at right angles to the
More informationDoor Edge Protection Film 36 inch
Door Edge Protection Film 36 inch Technical Data Sheet June, 2013 3M Part No.(s) PN 3M Part Descriptor(s) Door Edge Protection Film 36 inch Product Description 3M Door Protection Film is a super tough
More informationShaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications
NEW! 3M Cubitron II Abrasive Belts Introducing 994F and 997F for high pressure applications Shaping the future Revolutionary shaped abrasive grain grinds cooler and dramatically faster. Now engineered
More information3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:
3M Abrasive Systems Random Orbital Abrasive Disc Portfolio Sanding & Finishing Solutions! cs NsEivW e Dis Abra see inside Distributed by: The 3M Value The RIGHT Abrasives NEW Products NEW! Look for this
More information3M Automotive Aftermarket. 3M Blue Abrasives. The upgrade you ve been waiting for.
3M Automotive Aftermarket 3M Blue Abrasives. The upgrade you ve been waiting for. 3M Stikit Blue Abrasive Disc 3M Blue Abrasives are your go-to workhorse for the entire shop. 5" 3M Hookit Blue Abrasive
More informationVentureClad Insulation Jacketing Tapes 1577 Series
VentureClad Insulation Jacketing Tapes 1577 Series Technical Data August 2017 Product Description 3M VentureClad Insulation Jacketing System is a zero permeability, all weather, multi-layered laminate
More information3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs
3M Collision Repair Solutions 3M Abrasives and Power Tools Cutting & Grinding for Body Techs 3M Disc Sander Ideal for general metal fabrication applications, including grinding, blending, weld leveling
More informationConductor Strength Tests on ACCR 1622TW T13 Pecos Conductor
Conductor Strength Tests on ACCR 1622TW T13 Pecos Conductor 3M HCC Testing Laboratory August 5, 2011 Phu Trac Sr. Quality Engineer: Phu Trac Technical Manager: Dr. Herve Deve Lead Development Specialist:
More information3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive
3 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive Technical Bulletin October, 2009 Description 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive incorporate several
More informationSMC/Fiberglass Repair Adhesive - 90
SMC/Fiberglass Repair Adhesive - 90 Technical Data Sheet June, 2014 3M Part No.(s) 3M Part Descriptor(s) 3M SMC/Fiberglass Repair Adhesive - 90 Product Description 3M SMC/Fiberglass Repair Adhesive - 90,
More informationComposite Conductor 267-T16 ACCR. Deadend Strength Tests for 267-T16 ACCR
Composite Conductor 267-T16 ACCR Deadend Strength Tests for 267-T16 ACCR Principal Investigator: Dr. Colin McCullough Reviewed by: Dr. Herve Deve Date of Report: March 24, 2010 Deadend Strength Tests for
More informationFinish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders
NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders Redefining The Finish Line 3M Elite Series Sanders NEW Elite Series Air-Powered Sanders and NEW Electric
More informationWall mount PMV pump with suction kits and hoses
Installation and maintenance guide Wall mount PMV pump with suction kits and hoses Models V30500SWM, V40600SWM, V41000SWM, series A NOTE: Oil drum shown for illustration only, not included. Date of issue
More informationElectronic Materials Brochure
Electronic Materials Brochure TABLE OF CONTENTS 3 Introduction to Materials 4 ISODAMP C-8000 Materials 6 ISOLOSS SL Molding Materials - Thermosets 8 CONFOR EG Foams CONFOR SC Foams ISODAMP C-8000 MATERIALS
More informationModels P, P, P, , DANGER
Installation and maintenance guide Air filter Models 600104P, 600106P, 600108P, 600112, 600116 Date of issue January 2015 Form number 404646B Section G10 Page 31B DANGER Read manual prior to installation
More informationDual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive
3 Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive Technical Data Sheet June 2012 General Description Applications 3M Dual Lock Reclosable Fasteners are positive-locking, blind
More informationSIGMATHERM 230 / PPG HI-TEMP 230
DESCRIPTION Two-component, high-build, heat-resistant phenolic epoxy coating PRINCIPAL CHARACTERISTICS Suitable as heat resistant system under insulation up to 230 C (450 F) Good anticorrosive properties
More informationSIGMAZINC 105. PRODUCT DATA SHEET December 15, 2014 (Revision of July 1, 2013) DESCRIPTION. Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS
DESCRIPTION Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS Excellent anticorrosive properties Quick-drying, can be overcoated after 25 minutes Excellent application properties Cures at temperatures
More informationprotect mask conduct reflect enhance 3M Specialty Tape Solutions
3M Specialty Tape Solutions protect enhance mask reflect conduct 1 quiet & more Meeting application challenges for appliances, aerospace, automotive, construction, MRO, electronics, commercial transport,
More informationChenguang Fluoroelastomer
Technical Information Chenguang Fluoroelastomer Precompound CG A60C Features and Benefits Composition Characters Process Targets Curatives Di-polymer of VDF and HFP, with incorporated curative Broad MWD,
More informationPanel Bonding Adhesive
Panel Bonding Adhesive Technical Data August 2017 Product Description 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. 3M Panel
More informationHose reels for diesel exhaust fluid (DEF)
Installation and maintenance guide Hose reels for diesel exhaust fluid (DEF) Models 85700-30 and 85700-50 Date of issue January 2015 Form number 404381C Section E35 Page 78C DANGER Read manual prior to
More informationSIGMAGUARD 730. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION
DESCRIPTION Two-component, high solids polyamine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS Tank coating with good chemical resistance against a wide range of chemicals Short curing periods
More informationSIGMACOVER 350. PRODUCT DATA SHEET December 12, 2014 (Revision of June 1, 2014) DESCRIPTION
DESCRIPTION Two-component, high-build, polyamine-cured epoxy primer/coating PRINCIPAL CHARACTERISTICS Surface tolerant primer/coating for wide use in Marine and Protective Coatings Marine use: suitable
More informationUK PG 6/23(92) Appendix 3: max g/l (approx. 1.7 lb/us gal) 7.2 m²/l for 125 µm (289 ft²/us gal for 5.0 mils)
DESCRIPTION Two-component high solids aluminum pigmented polyamine cured modified epoxy primer/coating PRINCIPAL CHARACTERISTICS Primer/coating designed for maintenance Low VOC Good flow properties Self
More informationDirective 1999/13/EC, SED: max g/kg max g/l (approx. 2.6 lb/us gal) 6.6 m²/l for 100 µm (265 ft²/us gal for 4.
DESCRIPTION Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS Primer coat in the PHENGUARD tank coating system Excellent resistance to a wide
More informationSIGMACOVER 805. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION
DESCRIPTION Two-component, high solids polyamine adduct cured epoxy coating PRINCIPAL CHARACTERISTICS Can be used directly to metal Very good surface wetting Excellent corrosion resistance Outstanding
More informationSIGMAZINC 102 HS. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION
DESCRIPTION Two-component, high solids polyamide cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Very good primer for systems with high solids epoxy buildcoats Can also be used as a system primer
More informationNOVAGUARD 810. PRODUCT DATA SHEET December 11, 2014 (Revision of April 1, 2014) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine rapid-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Excellent resistance to crude oil up to 90 C (194 F) Suitable
More information3M Locator Plate
3M Locator Plate 3443-113 Instructions for the Assembly of 3M Tripolarized Wiremount Sockets 1.0 General The 3M Locator Plate 3443-113 was designed to aid in the assembly of the 3M Mini Socket Connector.50
More information3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide
3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide Installing Tall Skirt on SVC and SVE cabinets Instructions July 2016 78-0015-3067-0 2 July 2016 78-0015-3067-0 Contents 1. General
More informationSIGMAGUARD CSF 660. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2009) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine-cured epoxy coating PRINCIPAL CHARACTERISTICS Solvent-free coating for the protection of steel storage tanks against petroleum products Can be applied by
More information3M Abrasives.
3M Abrasives. www.3m.com.au 2 3M Abrasives Cleaning Scotch-Brite Clean and Strip Discs (Depressed Centre) Scotch-Brite Clean and Strip Discs (Depressed Centre) offer you a quick and simple solution. Clean
More informationCable Ties. Data Sheet
Cable Ties Data Sheet Product Description 3M Cable Ties are molded from 6/6 Nylon and are available in a variety of sizes, styles and colors including weather resistant black for outdoor use. Agency Listings
More informationRepair Method for 3M Resilient Floor Protection System
May 2013 Technical Bulletin Repair Method for 3M Resilient Floor Protection System Description The 3M Resilient Floor Protection system is designed to allow spot repair of areas damaged by scratching,
More informationSIGMAZINC 109. PRODUCT DATA SHEET January 16, 2015 (Revision of January 5, 2015) DESCRIPTION. Two-component, zinc-rich, polyamide-cured epoxy primer
DESCRIPTION Two-component, zinc-rich, polyamide-cured epoxy primer PRINCIPAL CHARACTERISTICS Designed as a system primer for various paint systems Good corrosion prevention properties Quick-drying, can
More informationSIGMAZINC 68 SP / AMERCOAT 68 SP
DESCRIPTION Two-component, high solids polyamide adduct cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Designed as a system primer in various paint systems for aggressive environments Excellent
More informationAutomotive-Ready Portfolio of 3M Double Sided Tapes. Ready to go further. The future of automotive design begins here.
Ready to go further. The future of automotive design begins here. Unleash your design freedom Ŕ Ŕ Quickly and securely attach lightweight and hard-to-bond materials Design-ready. Production-ready. Future-ready.
More informationElectronic lube meter
Installation and maintenance guide Electronic lube meter Model 981, series A Date of issue February 2013 Form number 404531 Section F22 Page 36B Danger Read manual prior to installation or use of this
More information3M Housings CH Series
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 3M s The CH housings are constructed from 316 L or 304 stainless steel and manufactured in accordance to design and
More informationSIGMASHIELD PRODUCT DATA SHEET August 22, 2018 (Revision of April 18, 2018) DESCRIPTION
DESCRIPTION Two-component, abrasion-resistant, solvent-free, amine-cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS Single coat system designed for under water hull of ice going and ice breaking
More information3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project
3M Electrical Markets Division Rubber, Mastic and Specialty Tapes Application Guide Choose the Right Tape for your Electrical Project 2 Table of Contents Insulating and Splicing...4 Scotch Linerless Rubber
More informationSeries Description. 2 Specifications. Traffic Safety and Security Division. Product Bulletin Series 4000ESV 06/2017
Traffic Safety and Security Division 3M Diamond Grade TM DG 3 Reflective Sheeting Series 4000 Product Bulletin Series 4000ESV 06/2017 1 Description 3M TM Diamond Grade TM DG 3 Reflective Sheeting Series
More informationSIGMADUR 520. PRODUCT DATA SHEET December 12, 2014 (Revision of May 01, 2013) DESCRIPTION
DESCRIPTION Two-component, high-build semi-gloss aliphatic acrylic polyurethane finish PRINCIPAL CHARACTERISTICS Easy application by roller and airless spray Unlimited recoatable Excellent resistance to
More informationFlo-Way. Measure Granular or Powdered Material. Stand Alone or Connect to Other Devices for Blending. Used by Successful Producers World-Wide
Flo-Way R Solids Impact Flow Meter Measure Granular or Powdered Material Stand Alone or Connect to Other Devices for Blending Used by Successful Producers World-Wide Visit our website: www.beltwayscales.com
More informationInstalling the Boom Mount ET 350 Monitor (Model ET 350R)
Installing the Boom Mount ET 350 Monitor (Model ET 350R) Intended Use When properly installed using the materials provided, and according to these instructions, the boom mount is intended to mount the
More informationSIGMADUR PRODUCT DATA SHEET December 12, 2014 (Revision of January 1, 2013) DESCRIPTION. Two-component, high solids polymeric urethane
DESCRIPTION Two-component, high solids polymeric urethane PRINCIPAL CHARACTERISTICS Excellent resistance to atmospheric exposure conditions Outstanding color and gloss retention Non-chalking, non-yellowing
More informationtwo component polyamine cured epoxy tiecoat
5 pages Revision of April 2009 Description PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (Directive 1999/13/EC, SED) VOC (UK PG 6/23(92) appendix 3) Recommended
More informationNOVAGUARD 840. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Clear version for glass-mat reinforced, solvent-free tank bottom
More informationAN RPM to TACH Counts Conversion. 1 Preface. 2 Audience. 3 Overview. 4 References
AN 17.4 RPM to TACH Counts Conversion 1 Preface 2 Audience 3 Overview 4 References This application note provides look up tables for the calculation of RPM to TACH Counts for use with the EMC2103, EMC2104,
More informationDual/Triple Manifold Water Filtration Systems Instruction Manual
3M TM Water Filtration Products Dual/Triple Manifold Water Filtration Systems Instruction Manual High Flow Series Water Filtration Systems Installer: Please leave this manual with owner/operator. 3M Water
More informationAir and water reels. Models and Series B. Installation and maintenance guide DANGER
Installation and maintenance guide Air and water reels Models 83753 and 83754 Series B Date of issue June 2014 Form number 404665A Section E35 Page 83A DANGER Read manual prior to installation or use of
More informationInstructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter
Instructions and Parts List TM 3M-Matic P/N 78-8069-3971-2 Infeed/Exit Conveyor Attachment, 1.2 Meter Type 19100 The Infeed/Exit Conveyor, 1.2 Meter, has been designed and tested to be used only with 3M-Matic
More informationToro Sprayer Calibration Tool
Commercial Products Toro Sprayer Calibration Tool User Guide & Installation Instructions Toro Sprayer Calibration Tool 1 Table of Contents Introduction... 2 Program Instructions... 4 Toro Software End
More informationDual Flow Manifold Systems Instruction Manual
3M TM Water Filtration Products Dual Flow Manifold Systems Instruction Manual For DF1XX and DF2XX High Flow Series manifolds and water filtration systems Installer: Please leave this manual with owner/operator.
More informationNOVAGUARD 890. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Excellent resistance to crude oil up to 120 C (250 F) Suitable
More informationSKF Super-precision Bearing Lubrication Unit. Improved reliability, profitability and reduced environmental impact
SKF Super-precision Bearing Lubrication Unit Improved reliability, profitability and reduced environmental impact Benefit your business and the environ To meet the ever-growing performance requirements
More information3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit
3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit With High-K Stress Relief For 3-Conductor Copper Tape Shield Cables with or without Ground Wires 7600-T-3RJS Series Instructions
More informationSafety Shock Absorbers SCS33 to SCS64
Safety Shock Absorbers SCS33 to SCS64 1 Operating Instruction SCS33-25EU SCS33-50EU SCS45-25EU SCS45-50EU SCS45-75EU Rod Button SCS64-50EU SCS64-100EU SCS64-150EU Integrated Rod Seals Main Bearing Content
More information3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series
3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working
More informationPTFE seals for screw compressors
PTFE seals for screw compressors Customized and off-the-shelf sealing solutions from SKF The Power of Knowledge Engineering If you know SKF just for bearings, you only know half the story SKF is your source
More information3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms
3M Products for Electrical Networks Wind Farm Capabilities Leading Edge Electrical Solutions for Wind Farms 3M technologies for wind farms Wind farm projects are difficult enough without the risk of construction
More informationDo not install and/or operate this safety product unless you have read and understand the safety information contained
Installation and Operation Instructions ED3766 TRI Color Directional LED Available in various color combinations, the ED3766 Directional LED is a surface mount, tri-color warning light that is ideal for
More informationData Sheet July For RoHS information, please visit
Data Sheet July 2017 3M Cable Ties are molded from 6/6 nylon and are available in a variety of sizes and styles, including weather resistant black for outdoor use. Agency Approvals & Self Certifications
More information3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TS (RW)
3M Cold Shrink Skirted Termination Kit QT-III 7672-S-8-TS (RW) for Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325 kv BIL CAUTION Working around energized systems
More information- Data Brochure D 156. Difference Setpoint Control 156. Item 06/10
- Data Brochure Difference Setpoint Control 156 D 156 06/10 The Difference Setpoint Control 156 is designed to operate an on/off pump to transfer heat from a heat source to a storage tank. The control
More information3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW)
3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW) for Tape Over Wire and Wire Over Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325
More information3M-MaticTM. Tape Edge Fold Kit. Instructions and Parts List. For Use On: AccuGlide TM STD Upper and lower Taping Heads. Purpose of Attachment
Instructions and Parts List 3M-MaticTM Tape Edge Fold Kit For Use On: AccuGlide TM STD Upper and lower Taping Heads Kit Part Number Fits 78-8095-4854-4 2 Inch Upper Head 78-8095-4855-1 2 Inch Lower Head
More informationTechnical Data 3M Petroleum Sorbents
Technical Data 3M Petroleum Sorbents Use For control of spills of hydrocarbons on water or land. 3M Petroleum Sorbents repel water and will float (as long as surfactants are not also present). Product
More informationBIN & SEN Annular Pitot Tube Flow Meter. Form: 10-PTT-UM (December 2012) Installation & Operation Manual
BIN & SEN Annular Pitot Tube Flow Meter Form: 1-PTT-UM-349 (December 212) Installation & Operation Manual Installation Instructions 1. The primary station can be installed in any position on vertical or
More informationCold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions
Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Class I Indoor Termination Voltage Designation: 12/20(24) kv Kit Contents: 1 HeatShrinkBreakoutBootAssembly 3 HeatShrinkBindingSleeves
More informationScale Feeder Manifold Water Filtration System Instruction Manual
3M TM Water Filtration Products Scale Feeder Manifold Water Filtration System Instruction Manual For SF1XX High Flow Series Water Filtration Systems Installer: Please leave this manual with owner/operator.
More informationDual Port Manifold Water Filtration Systems Instruction Manual
M TM Water Filtration Products Dual Port Manifold Water Filtration Systems Instruction Manual For DP1XX, DP2XX and DPXX High Flow Series Water Filtration Systems Installer: Please leave this manual with
More informationPowerFLEX Module Limited Warranty Program
PowerFLEX Module Limited Warranty Program Global Solar provides a limited warranty applicable to the Global Solar PowerFLEX TM Modules listed below: PowerFLEX TM 6-Meter - - FG-1 BT(M or N)-(275 or 300)
More informationEMISSION CONTROL WARRANTY STATEMENT
EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board, U.S. EPA and Zenith Power Products LLC (ZPP) are pleased to explain the emission control system
More information3M Locator Plate
M Locator Plate 44-94 Instructions for the assembly of M Socket Connectors,.100" x.100" and.100" x.200" 1.0 General M Manual and Pneumatic Assembly Presses and accessory assembly equipment are recommended
More information3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series
3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series Data Sheet March 2011 Description 3M Cold Shrink 1/C Transition Splice Kits QS-III, 5510A-1T-PILC Series (which includes 5513A-1T-PILC,
More information37SCENE 46SCENE 79SCENE
Installation and Operation Instructions LED SCENE LIGHT LED SCENE LIGHT 37SCENE 46SCENE 79SCENE 37SCENE 46SCENE Introduction The 37SCENE, 46SCENE, 79SCENE LED Scene Lights are designed for the emergency
More informationMOBILE HYDRAULICS WELDED & TIE ROD CYLINDERS
MOBILE HYDRAULICS WELDED & TIE ROD CYLINDERS Since 2001, PowerX International, LLC has been collaborating with its customers to design and supply hydraulic products and systems. Specializing in mobile
More informationThe Benefit of Sucker Rod Shot Peening
7 th Annual Sucker Rod Pumping Workshop Renaissance Hotel Oklahoma City, Oklahoma September 27-30, 2011 The Benefit of Sucker Rod Shot Peening Norman W. Hein, Jr., P.E. Director Development, Engineering
More information3M Cable Ties Product Guide. Made in USA. & Plenum Rated
3M Cable Ties Product Guide Made in USA & Plenum Rated A new line of general use cable ties from 3M Made in USA These ties are made of high quality 6/6 nylon in the USA, which offers excellent availability
More informationDUAL WIDEBAND AIR/FUEL RATIO GAUGE Product Numbers: GS-W702W_Dual, GS-C702W_Dual, GS-T702W_Dual
Installation Instructions Tech Support: 856.768.8300 TechSupport@GlowShiftGauges.com DUAL WIDEBAND AIR/FUEL RATIO GAUGE Product Numbers: GS-W702W_Dual, GS-C702W_Dual, GS-T702W_Dual (1) Gauge (2) Controllers
More informationTransmission Guardian
Transmission Guardian Thank you for purchasing the Transmission Guardian from Bowler Performance Transmissions. We hope you are 100 percent satisfied with your purchase and if for any reason you are not,
More information3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
(MDR) Assembly Supports LVDS Channel Link signaling 20 shielded pairs (100 ohm) +4 drains for high bandwidth applications High density 50 position MDR with rugged ribbon type contact 3 Unshielded Twisted
More informationCCP2-FLR1-21_ flange-rod operating mechanism
Installation manual 3A3747 Rev A Contents Description Page General information 1 Required tools 2 Hardware contents 2 Installation and adjustment 2-6 Flange drilling pattern 7 HAZARD OF ELECTRIC SHOCK,
More informationHigh-voltage primary bushings installation instructions
OEM Equipment Effective November 2013 Supersedes April 2013 S800-35-2 High-voltage primary bushings installation instructions DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY The information, recommendations,
More information3M Cold Shrink QT-III Silicone Rubber Termination
3M Cold Shrink QT-III Silicone Rubber Termination For Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Cable 7673-S-8(S)-TOW/WOT Instructions IEEE Std. No. 48 Class 1 Termination 69 kv Class, 350
More informationSIGMAPRIME 700. PRODUCT DATA SHEET December 13, 2014 (Revision of March 1, 2014) DESCRIPTION
DESCRIPTION Universal epoxy anticorrosive primer, based upon pure epoxy technology PRINCIPAL CHARACTERISTICS Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull,
More informationAG903-07E TDFN Current Sensor Evaluation Board
AG903-07E TDFN Current Sensor Evaluation Board 1A Max TDFN Current Sensor Evaluation Board www.nve.com 800-GMR-7141 Under PCB Through Leadframe Under Sensor 5 Turns AG903-06 SB-00-069B NVE Corporation
More informationScania Used Vehicle Extended Driveline Warranty
Scania Used Vehicle Extended Driveline Warranty Scania Dealers supply Approved Used Vehicles with the Scania Used Vehicle Extended Driveline Warranty to first purchasers from the Dealership subject to
More informationEvolving chiller performance SKF solutions for centrifugal compressors in chillers
Evolving chiller performance SKF solutions for centrifugal compressors in chillers The Power of Knowledge Engineering Need to optimize your centrifugal Speed high mid low Oil Super-precision angular contact
More informationFull Flow Drinking Water System Model: 3MFF100
Installation and Operating Instructions For Full Flow Drinking Water System Model: 3MFF100 System tested and Certified by NSF International against NSF/ANSI Standard 42 and 53 for the reduction of the
More information3M Pleated Foil I/O Cable Assemblies MDR Series
Mates with standard 3M MDR Boardmount Headers Pleated copper foil provides a 360 degree shield Overmolded Assemblies Available in 68, 80 and 100 Positions Molded-in strain relief Can utilize either #4-40
More information60 PSI Boost Gauge. For Product Numbers: MT-DV01_60, MT-WDV01_60
60 PSI Boost Gauge For Product Numbers: MT-DV01_60, MT-WDV01_60 Red: 12v Constant (un-switched) Source (+) Orange: 12v Dimmer (switched) Source (+) (optional) White: 12v Ignition (switched) Source (+)
More information3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC
3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC For Tape Shield or Longitudinally Corrugated (LC) Shielded Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350
More information