TJ3X HEAVY DUTY TROLLEY JACK

Size: px
Start display at page:

Download "TJ3X HEAVY DUTY TROLLEY JACK"

Transcription

1 TJ3X HEAVY DUTY TROLLEY JACK OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.

2 SPECIFICATION MAX CAPACITY RETRACTED HEIGHT FULLY EXTENDED 3 TONNE 130MM 465MM OPERATION The owner is responsible for maintaining all decals and warning labels and maintaining the unit in good working order. Safety information should be emphasised and understood prior to usage. This jack shall be inspected as per the instruction manual before each use. It is the owner s/operators responsibility to study all warnings, operating and maintenance instructions contained on the product label and within this instruction manual to ensure proper operation of this jack. The owner/operator shall retain these product instructions for future reference. This jack shall be maintained in accordance with the product instructions. No alterations shall be made to this jack. INSPECTION Before each use a visual inspection shall be made for abnormal conditions such as cracked welds, damaged, bent, worn, loose or missing parts. This jack should be inspected immediately if it is believed to have been subjected to an abnormal load or shock. Owner/operators should be aware that repair of this jack requires specialised equipment and knowledge. PAGE 2

3 ASSEMBLY 1. Line up the holes in the two-piece handle and fasten with the assembly screw. 2. Loosen the location bolt at the side of the handle base. Insert jack handle and tighten the bolt. RAISING A VEHICLE 1. Make sure the jack and vehicle are on a hard level surface. 2. Always set the vehicle handbrake and chock the wheels. 3. Consult the vehicle owner s manual to ascertain the location of jacking points and position the jack beneath the lift point. 4. Turn the handle clockwise to the closed position. 5. To raise the vehicle pump the handle up and down. 6. Place jack stands beneath the vehicle at locations recommended by the vehicle manufacturer. Do not work under the vehicle without the use of jack stands. Jacks are not designed to maintain heavy loads for long periods of time. Do not attempt to place jack stands simultaneously under both ends of a vehicle or along one side of a vehicle. 7. Turn the handle slowly counter clockwise to lower the vehicle onto the jack stands. PAGE 3

4 LOWERING A VEHICLE 1. Turn the handle clockwise to close the release valve. 2. Pump the handle to lift the vehicle off the jack stands. 3. Remove the jack stands. Do not get under the vehicle while the vehicle is being lowered. 4. Turn the handle slowly counter clockwise to lower the vehicle onto the ground. WARNING Read and understand all warnings and instructions prior to use. Do not overload this jack beyond its rated capacity. This jack is a lifting device only. This jack is designed for use on hard level surfaces only. The load must be supported by jack stands once raised. Do not dolly or move the vehicle while it is on the jack. Lift only on areas as specified by the vehicle manufacturer. Only attachments and/or adaptors supplied by sgs shall be used. No alterations to the jack shall be made. Failure to heed these warnings may result in damage to the jack and/or failure resulting in personal injury or property damage. Inspect the jack before each use. PAGE 4

5 MAINTENANCE GUIDE Daily. See INSPECTION (page 2). Monthly. Lubrication is critical to jacks as they support heavy loads. Any restriction due to dirt, rust or corrosion can cause either slow movement or rapid jerks damaging the internal components. The following steps are designed to keep the jack maintained and operational: 1. Open the release valve by turning the handle knob counter clockwise and push the ram to its lowest position 2. Remove the filler plug. 3. Fill with clean hydraulic jack oil. Do not use hydraulic brake fluid. 4. Reinstall the filler plug. Add lubrication to all moving parts as needed. Every 6 months. Carry out a thorough inspection for serviceability of component parts Visually inspect for oil leaks (only a slight oil seepage is permissible). If a leak is found, take the jack out of service and consult with SGS Engineering. Annually. Check the ram oil level as follows: 1. Ensure the ram is fully retracted by turning the knob fully anticlockwise. 2. Remove the cover plate, located at the base of the handle housing, to gain access the ram, then remove the ram filler plug. 3. Lift the jack so that it is vertical, resting on its front wheels and check the oil level. It should be level with the bottom of the oil filler hole. If necessary, top up with Hydraulic oil. 4. Replace filler plug and purge system of air (see page 7). PAGE 5

6 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE ACTION JACK WILL NOT LIFT TO FULL HEIGHT JACK WILL NOT HOLD LOAD LOW OIL LEVEL RELEASE VALVE NOT CLOSING OIL CONTAMINATED PUMP VALVES NOT SEALING CYLINDER RAM BINDING CHECK OIL LEVEL AND REFILL IF NECESSARY CONTACT CUSTOMER SERVICE LIFT ARM WILL NOT LOWER JACK FEELS SPONGY WHEN LIFTING CYLINDER RAM BINDING PARTS WORN INTERNAL DAMAGE BROKEN RETURN SPRING LIFT ARM LINKAGE BENT OR BINDING SEE AIR PURGE SECTION CONTACT CUSTOMER SERVICE PURGE TRAPPED AIR FACTORY SERVICE If this hydraulic jack if found to be damaged in any way, worn or operating abnormally it should be removed from service until inspected by an authorised repair centre. Owner/operators should be aware that the repair of this jack requires specialised equipment and knowledge. Only factory authorised parts, labels and decals shall be used on this equipment. An annual inspection of this jack by an authorised repair centre is recommended to ensure the jack maintains an optimum operating condition. PAGE 6

7 CHECK THE OIL LEVEL 1. To check the hydraulic oil level, fully lower the jack and removed filter plug. 2. The correct oil level should be approximately 5mm below the filler opening. If oil level is low, fill as required. 3. Pump uloaded jack 5 or 6 timnes to expel air and then rfit the plug. NOTE: use good quality jack oil WARNING! DO NOT use brake fluid, or anything other than hydraulic jack fluid as this may cause serious damage to the jack and invalidate the warranty. SYSTEM AIR PURGE 1. Turn the handle counter clockwise one full turn to open. 2. Pump the handle eight full strokes. 3. Turn handle clockwise to close the valve. 4. Pump the handle until the ram reaches maximum height and continue to pump several times to remove air trapped in the ram. 5. Turn the handle counter clockwise one full turn and lower the ram to the lowest position. Use force on the saddle if necessary. 6. Turn the handle clockwise to the closed position and check for proper pump action. It may be necessary to perform the above more than once to ensure all the trapped air is evacuated. PAGE 7

8 No. Description QTY No. Description QTY 1 Cylinder assembly 1 25 Screw M6X Cotter Pin 1 26 Cover plug 2 3 Linkage 1 27 Cover board 12 4 Retaining ring 4 28 Right bolt 1 5 Lifting arm assembly 1 29 Handle 2 6 Supporting Shaft 1 30 Washer 2 7 Saddle 1 31 Shaft Gasket 1 8 Screw 1 32 Handle Socket 1 9 Retaining ring 2 33 Screw 2 10 Linking pin 2 34 Rubber vannulation 1 11 Wall plate assembly 1 35 Handle shaft 2 12 Front wheel 2 36 Spring 1 13 Retaining ring 2 37 Y-ring 1 14 Washer 2 38 Back supporting ring 1 15 Retaining washer Piston cap 1 16 Nut M Piston rod 1 17 Rear wheel assembly 2 41 Sealing ring 1 18 Bolt M12X House 1 19 Washer 8 dia 2 43 O ring 1 20 Screw M8X O ring 1 21 Back shaft 1 45 Screw cap 1 22 Retaining ring 6 46 Oil plug 1 23 Nut M Ball 6 dia 1 24 Washer 2 PAGE 8

9 PAGE 9

10 No. Description QTY No. Description QTY 1 Screw 1 25 O ring 2 2 O ring 1 26 Plug 1 3 Spring 1 27 Screw 1 4 Spring base 1 28 Safety spring 1 5 Ball 5 dia 6 29 Spring base 1 6 Pump piston 1 30 Ball 3 dia 1 7 Circlip 2 31 Base 1 8 O ring 2 32 Filter tubing 2 9 Spring base 1 33 Copper Washer 1 10 Spring sleeve 1 34 O Ring 1 11 Spring 1 35 Circlip 1 12 Large pumo 1 36 Cylinder 1 13 Rectangular seals 1 14 Universal joint shaft 1 15 O ring 2 16 Spring base 1 17 Spring sleeve 1 18 Spring 1 19 Small pump 1 20 Circlip 2 21 O ring 1 22 Rectangular seals 1 23 Small piston 1 24 Circlip 2 PAGE 10

11 PAGE 11

12 WARRANTY This SGS product is covered by a 24 month warranty from the initial date of purchase. This is a domestic warranty provided directly by SGS Engineering. Please keep a recipt of your pucrchase as this may be required as proof of purchase. You will invalidate your warranty if the product is found to have been misused, tampered with, modified, overloaded or used for an application for which it was not designed. The warranty will also be rendered invalid if the maintenance prodcedure has not been followed. You must contact SGS Engineering prior to returning any product. This warranty does not effect your statutory rights. PAGE 12

13 EC Declaration of Conformity SGS Engineering (UK) Ltd West Side Park Raynesway Derby, DE21 7AZ This is an important document and should be retained MANUFACTURER S NAME: TYPE OF EQUIPMENT: PART NUMBER: SGS Engineering (UK) Ltd Hydraulic Trolley Jack TJ3X APPLICATION OF EC COUNCIL DIRECTIVES / STANDARD: 2006/42/EC EN1494: A1:2008 Machinery Directive as amended by directive 2009/127/EC Mobile or movable jacks and associated lifting equipment I, the undersigned, hereby declare that the equipment specified above conforms to the above European Communities Directive(s) and Standard(s). PLACE: DATE: Derby, UK 24th JUNE 2017 (Signature) Robert Wyatt Company Secretary

PROFESSIONAL BOTTLE JACK

PROFESSIONAL BOTTLE JACK PROFESSIONAL BOTTLE JACK OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPECIFICATION MODEL MAX CAPACITY MIN HEIGHT MAX HEIGHT BJ2 2 TON 181 345

More information

TJA2.5 ALUMINIUM TROLLEY JACK

TJA2.5 ALUMINIUM TROLLEY JACK TJA2.5 ALUMINIUM TROLLEY JACK OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPECIFICATION Part Number: Product Weight: Brand: Capacity: A - Closed

More information

15,000kg HYDRAULIC BOTTLE JACK

15,000kg HYDRAULIC BOTTLE JACK Product Code: 2013 OWNER S MANUAL PRODUCT CODE: 2013 15,000kg HYDRAULIC BOTTLE JACK Lifting Capacity 15,000kg Max. Lifting Height 447mm Min. Lifting Height 227mm Hydraulic Lift 125mm Screw Adjustment 70mm

More information

1.5 TON ALUMINUM RACING JACK

1.5 TON ALUMINUM RACING JACK 1.5 TON ALUMINUM RACING JACK OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

PETROL GENERATOR SPG2200, SPG3000, SPG6500 OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.

PETROL GENERATOR SPG2200, SPG3000, SPG6500 OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. PETROL GENERATOR OWNER S MANUAL SPG2200, SPG3000, SPG6500 FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. WARRANTY This generator is covered by a 24 month warranty

More information

2¼ TONNE TROLLEY JACK

2¼ TONNE TROLLEY JACK 2¼ TONNE TROLLEY JACK Model No: CTJ2250LP PART NO: 7623070 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Trolley Jack. Before attempting to use this product,

More information

2 TONNE TROLLEY JACK

2 TONNE TROLLEY JACK 2 TONNE TROLLEY JACK Model No: CTJ2000LP PART NO: 7623065 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Trolley Jack. Before attempting to use this product,

More information

HEAVY DUTY TROLLEY JACK. Operation Manual

HEAVY DUTY TROLLEY JACK. Operation Manual HEAVY DUTY TROLLEY JACK 4T Operation Manual Make sure to read and fully understand the instruction manual before using this product and keep the manual properly 1 General Description Product Description

More information

500kg TELESCOPIC TRANSMISSION LIFTER

500kg TELESCOPIC TRANSMISSION LIFTER Product Code: 2056T PRODUCT CODE: 2056T 500kg TELESCOPIC TRANSMISSION LIFTER Safe Working Capacity 500kg Base Dimension 540 x 570 mm Minimum Height 1175mm Maximum Height 1900mm Made in China to TQB Brands

More information

GARAGE JACK MODEL NO: CTJ3000QLB PART NO: OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS

GARAGE JACK MODEL NO: CTJ3000QLB PART NO: OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GARAGE JACK MODEL NO: CTJ3000QLB PART NO: 7623205 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1216 2 INTRODUCTION Thank you for purchasing this CLARKE Garage Jack. Before attempting to

More information

20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT

20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT 20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT PART NO: 7614058 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this

More information

INTRODUCTION Please read this manual before you use your jack and ensure you understand its operation and the safety procedures to be observed.

INTRODUCTION Please read this manual before you use your jack and ensure you understand its operation and the safety procedures to be observed. Rated Capacity: 4000kg Closed Height: 19.5cm (approx) Hydraulic Lift: 11.8cm (approx) Maximum Extended Height: 6cm (approx) 4 Tonne Bottle Jack Instruction Manual Item Code: 332343 Model T90404 INTRODUCTION

More information

50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP

50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP 50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP PART NO: 7615202 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this

More information

OWNER S MANUAL PRODUCT CODE: 2006T

OWNER S MANUAL PRODUCT CODE: 2006T Jul-18 Product Code: 2006T OWNER S MANUAL PRODUCT CODE: 2006T HYDRAULIC PIPE BENDER 12,000KG Model Capacity Bending Die No of Attachments 12,000kg 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" 6 Made in China to

More information

3-TONNE GARAGE JACK OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: CTJ3000GB PART NO: ORIGINAL INSTRUCTIONS

3-TONNE GARAGE JACK OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: CTJ3000GB PART NO: ORIGINAL INSTRUCTIONS 3-TONNE GARAGE JACK MODEL NO: CTJ3000GB PART NO: 7623032 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1216 2 INTRODUCTION Thank you for purchasing this CLARKE Garage Jack. Before attempting

More information

GARAGE JACK MODEL NO: CTJ3000G PART NO: OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS

GARAGE JACK MODEL NO: CTJ3000G PART NO: OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GARAGE JACK MODEL NO: CTJ3000G PART NO: 7623030 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1217 INTRODUCTION Thank you for purchasing this CLARKE Garage Jack. Before attempting to use

More information

3.25 Ton Heavy Duty Floor Jack

3.25 Ton Heavy Duty Floor Jack Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 10 TONNE HEAVY DUTY LONG CHASSIS TROLLEY JACK MODEL NO: CTJ10GLS PART NO: 7623095 OPERATION & MAINTENANCE INSTRUCTIONS LS0915 INTRODUCTION Thank you for purchasing this CLARKE 10 Tonne Heavy Duty Long

More information

2 TONNE GARAGE JACK Model No: CTJ2QLP PART NO:

2 TONNE GARAGE JACK Model No: CTJ2QLP PART NO: TONNE GARAGE JACK Model No: CTJQLP PART NO: 7680 OPERATING & MAINTENANCE INSTRUCTIONS GC03 INTRODUCTION Thank you for purchasing this CLARKE Garage Jack. Before attempting to use this product, please read

More information

3 Ton Trolley Jack. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.

3 Ton Trolley Jack. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

SPRAY GUN OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.

SPRAY GUN OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPRAY GUN OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPECIFICATION TOOL MODEL REQUIRED AIR CFM NOZZLE MIX OPERATING PRESSURE TOOL WEIGHT SAT501

More information

PETROL GENERATOR PGH2200, PGH3000, PGH6500 OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.

PETROL GENERATOR PGH2200, PGH3000, PGH6500 OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. PETROL GENERATOR OWNER S MANUAL PGH2200, PGH3000, PGH6500 FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. WARRANTY GENERATOR SAFETY This generator is covered by

More information

INVERTER GENERATOR OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.

INVERTER GENERATOR OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. INVERTER GENERATOR OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. GENERATOR SAFETY Only use outdoors! Never use during wet conditions! Do not smoke

More information

Long Chassis Hydraulic Service Jacks

Long Chassis Hydraulic Service Jacks Long Chassis Hydraulic Service Jacks Operating Instructions & Parts Manual Model Number Atd-7390 Atd-7391 Capacity 5 Ton 10 Ton Atd Tools Inc. 160 Enterprise Drive, Wentzville MO 63385 Printed in China

More information

ABSOLUTE EQUIPMENT PTY LTD

ABSOLUTE EQUIPMENT PTY LTD Manual Hydraulic Toe Jack Model DTJ Series ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au Phone: +61 7 3865 4006 Fax: +61 7 3102 6288 This is

More information

ABSOLUTE EQUIPMENT PTY LTD

ABSOLUTE EQUIPMENT PTY LTD Manual Hydraulic Toe Jack Model DTJ Series ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au Phone: +61 7 3865 4006 Fax: +61 7 3102 6288 This is

More information

jegs.com. Installation Instructions for Ton Aluminum Floor Jack

jegs.com. Installation Instructions for Ton Aluminum Floor Jack Installation Instructions for 80077 3-Ton Aluminum Floor Jack Contents: Specifications Warning Information Setup and Operating Instructions Preventive Maintenance and Troubleshooting Hydraulic Maintenance

More information

3/4 Ton Heavy Duty Wheel Dolly

3/4 Ton Heavy Duty Wheel Dolly 3/4 Ton Heavy Duty Wheel Dolly Operating Instructions & Parts Manual BH8075 SFA Companies 2004 10939 N. Pomona Ave. Kansas City, MO 64153 816-891-6390 sales@blackhawk-automotive.com - Before using this

More information

MODEL TON HYDRAULIC FLOOR JACK

MODEL TON HYDRAULIC FLOOR JACK MODEL 66510 10 TON HYDRAULIC FLOOR JACK USER'S MANUAL *This hydraulic jack conforms to all "ANSI / ASME" safety standards. Jackco Transnational Inc. 2010 South El Monte, CA 888-452-2526 To see more jackco

More information

MODEL TON HYDRAULIC FLOOR JACK

MODEL TON HYDRAULIC FLOOR JACK MODEL 66500 5 TON HYDRAULIC FLOOR JACK USER'S MANUAL *This hydraulic jack conforms to all "ANSI / ASME" safety standards. Jackco Transnational Inc. 2010 South El Monte, CA 888-452-2526 To see more jackco

More information

Hydraulic Wheel Dolly

Hydraulic Wheel Dolly Hydraulic Wheel Dolly Operating Instructions & Parts Manual Model Number HW93765 Capacity 3/4 Ton Made in the U.S.A. This is the safety alert symbol. It is used to alert you to potential personal injury

More information

HYDRAULIC BENCH PRESS 50,000kg

HYDRAULIC BENCH PRESS 50,000kg OWNER S MANUAL PRODUCT CODE: 2037T HYDRAULIC BENCH PRESS 50,000kg Working Capacity Height Width Depth Weight 50,000kg 1660mm 1220mm 800mm 236kg Made in China to TQB Brands Pty Ltd specifications WARNING

More information

Service Jacks. Operating Instructions & Parts Manual. Model Number. Capacity 4 Ton 4 Ton Air/ Manual 10 Ton 10 Ton Air/ Manual HW93657/ HW93660

Service Jacks. Operating Instructions & Parts Manual. Model Number. Capacity 4 Ton 4 Ton Air/ Manual 10 Ton 10 Ton Air/ Manual HW93657/ HW93660 Service Jacks Operating Instructions & Parts Manual Model Number HW93657 HW93667 HW93660 HW93662 Capacity 4 Ton 4 Ton Air/ Manual 10 Ton 10 Ton Air/ Manual Made in North America HW93657/ HW93660 HW93667/

More information

6602LP CAPACITY: 2 TON LOW RIDER SERVICE JACK

6602LP CAPACITY: 2 TON LOW RIDER SERVICE JACK CONTENTS: Page 1 Specifications 2 Warning Information 3 Setup Instructions 4 Operating Instructions, Preventative Maintenance, Inspection and Proper Storage 5 Hydraulic Jack Maintenance Guide and Regular

More information

04979, 04980, 04981, 04982, 04983, 04984, 39054, 39055, 39056, 39057, 39225, 81459,

04979, 04980, 04981, 04982, 04983, 04984, 39054, 39055, 39056, 39057, 39225, 81459, Hydraulic Bottle Jacks 04979, 04980, 04981, 04982, 04983, 04984, 39054, 39055, 39056, 39057, 39225, 81459, 82132. These instructions accompanying the product are the original instructions. This document

More information

Hydraulic Wheel Dolly

Hydraulic Wheel Dolly Hydraulic Wheel Dolly Operating Instructions & Parts Manual Model Number HW93766 Capacity 3/4 Ton Made in the U.S.A. This is the safety alert symbol. It is used to alert you to potential personal injury

More information

Hydraulic Clutch Jack

Hydraulic Clutch Jack Hydraulic Clutch Jack Operating Instructions & Parts Manual Model Number Atd-7404 Capacity 500 Lb. Atd Tools Inc. 160 Enterprise Drive, Wentzville MO 63385 Printed in China ATD7404-M0 05/07 Save these

More information

6722 Rev. A CAPACITY: 22 TON TRUCK AXLE JACK WITH AIR RETURN

6722 Rev. A CAPACITY: 22 TON TRUCK AXLE JACK WITH AIR RETURN CONTENTS: Page Specifications 2 Warning Information Setup Instructions and Operating Instructions 4 Preventative Maintenance, Inspection and Proper Storage 5 Troubleshooting, Owner/User Responsibility

More information

2 TON CAPACITY PROFESSIONAL SERIES ALUMINUM JACK OWNER'S MANUAL SPECIFICATIONS

2 TON CAPACITY PROFESSIONAL SERIES ALUMINUM JACK OWNER'S MANUAL SPECIFICATIONS 80006 OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Warning Information 3 Setup, Operating and Preventative Maintenance 4 Troubleshooting 5 Maintenance 6 Exploded View Drawing and Replacement Parts

More information

2 1/4 TON HYDRAULIC FLOOR JACK

2 1/4 TON HYDRAULIC FLOOR JACK 2 1/4 TON HYDRAULIC FLOOR JACK Item Number W1611 OWNER S MANUAL WARNING It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product

More information

HYDRAULIC PALLET TRUCKS

HYDRAULIC PALLET TRUCKS HYDRAULIC PALLET TRUCKS HYDRAULIC PALLET TRUCKS MODEL Nos: PT550 GAL & PT685 GAL PART Nos: 7630234 & 7630236 OPERATION & MAINTENANCE INSTRUCTIONS 0204 Please read these instructions carefully before operating

More information

INSTALLATION AND OPERATION MANUAL Low Profile Long Frame Floor Jack Model: RFJ-3000LPF REV B

INSTALLATION AND OPERATION MANUAL Low Profile Long Frame Floor Jack Model: RFJ-3000LPF REV B PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS MANUAL

More information

Forklift & Tractor Jack

Forklift & Tractor Jack Forklift & Tractor Jack 10435 4 Ton Capacity ASSEMBLY & OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS. For your safety and the safety of others around you, read carefully before attempting to install,

More information

HYDRAULIC PALLET TRUCK. MODEL No: PTE550 PART Nos OPERATION & MAINTENANCE INSTRUCTIONS

HYDRAULIC PALLET TRUCK. MODEL No: PTE550 PART Nos OPERATION & MAINTENANCE INSTRUCTIONS HYDRAULIC PALLET TRUCK MODEL No: PTE550 PART Nos 7630171 OPERATION & MAINTENANCE INSTRUCTIONS 0604 Please read these instructions carefully before operating the truck Thank you for purchasing this CLARKE

More information

Instructions for: FOLDING ENGINE CRANE PREMIER 2 TONNE. MODEL No: SPC2000

Instructions for: FOLDING ENGINE CRANE PREMIER 2 TONNE. MODEL No: SPC2000 Instructions for: FOLDING ENGINE CRANE PREMIER 2 TONNE MODEL No: SPC2000 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

More information

Operating Instructions & Parts Manual

Operating Instructions & Parts Manual Hydraulic Long Ram Operating Instructions & Parts Manual Model Number ATD-7486 Capacity 8 Ton WARNING: This product may contain chemicals, including lead, known to the State of California to cause cancer,

More information

Air Actuated Hydraulic Bottle Jack on Wheels

Air Actuated Hydraulic Bottle Jack on Wheels Operating Instructions & Parts Manual Air Actuated Hydraulic Bottle Jack on Wheels Model Number 18127 18207 Capacity 12 Ton 20 Ton Shinn Fu Co. of America, Inc. 2002 10939 N. Pomona Avenue Kansas City,

More information

2 Ton - 50 Ton Bottle Jack

2 Ton - 50 Ton Bottle Jack Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

2 TONNE TROLLEY JACK

2 TONNE TROLLEY JACK 2 TONNE TROLLEY JACK 61829 IMPORTANT: Please read these instructions carefully to ensure the safe and effective use of this product and save these instructions for future reference. This manual has been

More information

HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: , , , ,

HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: , , , , HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: 7631700, 7631705, 7631710, 7631715, 7631720 OPERATION & MAINTENANCE INSTRUCTIONS LS0316 INTRODUCTION Thank you for purchasing this CLARKE

More information

Mini Jacks Instruction Manual

Mini Jacks Instruction Manual J11050-M0_062017 Instruction Manual MODELS: J11050, J11055-5 Ton Capacity J11100-10 Ton Capacity J11200-20 Ton Capacity This is the safety alert symbol. It is used to alert you to potential personal injury

More information

Operating Instructions 20 Ton Air/Hydraulic Service Jack

Operating Instructions 20 Ton Air/Hydraulic Service Jack MODEL: 3225 Operating Instructions 20 Ton Air/Hydraulic Service Jack WARNING: Important: Read these instructions and all warnings prior to using this equipment. Understand all operating procedures, safety

More information

STRUT SPRING COMPRESSOR

STRUT SPRING COMPRESSOR OWNER S MANUAL PRODUCT CODE: 1221T STRUT SPRING COMPRESSOR Capacity Stroke Spring Coil Spring Spring Coil Net Weight (Maximum) Thickness Length Diameter 1,000kg 330mm 10-18mm 210-570mm 100-158mm 36kg Made

More information

Air Actuated Hydraulic Bottle Jacks

Air Actuated Hydraulic Bottle Jacks Air Actuated Hydraulic Bottle Jacks Operating Instructions & Parts Manual Model Number Atd-7412 Atd-7420 Capacity 12 Ton 20 Ton Atd Tools Inc. 160 Enterprise Drive, Wentzville MO 63385 Printed in China

More information

Long Chassis Hydraulic Service Jacks

Long Chassis Hydraulic Service Jacks Model BH6011 Long Chassis Hydraulic Service Jacks Operating Instructions and Parts Manual Capacity 10 Ton Model BH6011 U.S. Patent No's. 5,946,912 5,341,723! This is the safety alert symbol. It is used

More information

Heavy Duty Engine Cranes

Heavy Duty Engine Cranes Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number ATD-7484 ATD-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model ATD-7484 Model ATD-7485 WARNING: This product may contain chemicals,

More information

Heavy Duty Engine Cranes

Heavy Duty Engine Cranes Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number Atd-7484 Atd-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model Atd-7484 Model Atd-7485 Atd Tools Inc. 160 Enterprise Drive, Wentzville,

More information

Operating Instructions & Parts Manual

Operating Instructions & Parts Manual Aluminum / Steel Hybrid Service Jack Operating Instructions & Parts Manual Model 26017 26028 26033 Capacity 1.5 Ton 2.5 Ton 3 Ton! This is the safety alert symbol. It is used to alert you to potential

More information

INSTALLATION AND OPERATION MANUAL Aluminium Racing Jack Model: RFJ-3000AL

INSTALLATION AND OPERATION MANUAL Aluminium Racing Jack Model: RFJ-3000AL PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS MANUAL

More information

TXJ0500/RR500 1,000-lbs. Truck Bed Roller Dolly

TXJ0500/RR500 1,000-lbs. Truck Bed Roller Dolly OWNER S MANUAL TXJ0500/RR500 1,000-lbs. Truck Bed Roller Dolly WARNING: Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-448-6746, 8

More information

Installation and Operation Manual

Installation and Operation Manual 1645 Lemonwood Dr. Santa Paula, CA 93060 USA Toll Free: 1 (800) 253-2363 Tel: 1 (805) 933-9970 rangerproducts.com Ranger Floor Jack Installation and Operation Manual Manual Revision B July 2017 Manual

More information

Low Profile Service Jack Jack Stand Combo

Low Profile Service Jack Jack Stand Combo Low Profile Service Jack Jack Stand Combo Jack Stands Low Profile Service Jack U.S. Patent No. 6,199,379! This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

More information

OWNER/OPERATOR MANUAL. Airmotor effective dia. in. 2.5

OWNER/OPERATOR MANUAL. Airmotor effective dia. in. 2.5 MODELS 282050, 282716 & 283513 AIR OPERATED CHASSIS PUMP SERIES A OWNER/OPERATOR MANUAL SPECIFICATIONS Airmotor effective dia. in. 2.5 Airinlet Material outlet 1/4 NPTF 1/4 NPTF Liquid to Air Pressure

More information

VEHICLE POSITIONING JACK

VEHICLE POSITIONING JACK VEHICLE POSITIONING JACK Model No: VPJ300 PART NO: 7624100 OPERATING & MAINTENANCE INSTRUCTIONS GC06/12 INTRODUCTION Thank you for purchasing this CLARKE Vehicle Positioning Jack. Before attempting to

More information

Low Profile Service Jack

Low Profile Service Jack Low Profile Service Jack Model GMG29031 Capacity 3 Ton U.S. Patent No. 6,199,379! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages

More information

Heavy Duty Bottle Jacks

Heavy Duty Bottle Jacks Heavy Duty Bottle Jacks Models: 10300 & 10500 10300 10500! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol

More information

MagicLift Hydraulic Service Jack Model (w/one piece handle) (w/one piece handle)

MagicLift Hydraulic Service Jack Model (w/one piece handle) (w/one piece handle) Operating Instructions & Parts Manual MagicLift Hydraulic Service Jack Model 27025 27026 (w/one piece handle) 27035 27036 (w/one piece handle) Capacity 2-1/2 Ton 2-1/2 Ton 3-1/2 Ton 3-1/2 Ton Model 27025

More information

Strut Spring Compressor

Strut Spring Compressor Strut Spring Compressor Operating Instruction & Parts Manual Model Number Atd-7553 Model Atd-7553 Atd Tools Inc. 114 I-70 Trade Center Drive, St. Peters, MO 63376 Printed in Taiwan Save these instructions.

More information

SPECIFICATIONS SPECIFICATIONS

SPECIFICATIONS SPECIFICATIONS 4430 and 4450 OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Warning Information 3 Setup and Operating Instructions 4 Preventative Maintenance and Troubleshooting 5 4430 Exploded View Drawing and Parts

More information

Operating Instructions & Parts Manual

Operating Instructions & Parts Manual Swift Lift Hydraulic Service Jack Operating Instructions & Parts Manual Model Number ATD7341 Capacity 3-1/2 Ton U.S. Patent No's. 5,946,912 6,199,379! This is the safety alert symbol. It is used to alert

More information

Service Jacks. Operating Instructions & Parts Manual. Made in the USA

Service Jacks. Operating Instructions & Parts Manual. Made in the USA Service Jacks Operating Instructions & Parts Manual Model Number HW93642 HW93652 Capacity 2 Ton 3 Ton Made in the USA SFA Companies 2005 10939 N. Pomona Ave. Kansas City, MO 64153 816-891-6390 customerservices@heinwerner-automotive.com

More information

1 TONNE FOLDING CRANE. 1 TONNE FOLDING CRANE MODEL No CFC100 PART No OPERATING & MAINTENANCE INSTRUCTIONS 1202

1 TONNE FOLDING CRANE. 1 TONNE FOLDING CRANE MODEL No CFC100 PART No OPERATING & MAINTENANCE INSTRUCTIONS 1202 1 TONNE FOLDING CRANE 1 TONNE FOLDING CRANE MODEL No CFC100 PART No 7611005 OPERATING & MAINTENANCE INSTRUCTIONS 1202 2 11 SPARE PARTS No Description Qty Part No No Description Qty Part No 1 Main Support

More information

Hydraulic Transmission Jacks

Hydraulic Transmission Jacks Hydraulic Transmission Jacks Operating Instructions & Parts Manual Model Number Atd-7435 Atd-7436 Atd-7437 Capacity 1100 Lb. 2000 Lb. 3000 Lb. Model Atd-7435 Model Atd-7436 Model Atd-7437 Atd Tools Inc.

More information

22/35 Two Stage Truck Jack

22/35 Two Stage Truck Jack Model 1003 CAPACITY RATCHETING JACK STAND DO NOT OVERLOAD AND. ST OVERLOADING CAN CAUSE DAMAGE AILURE TO,, OF OR ENSURE F BOTH ANDS ST ARE SET T SAME HEIGHT & HOLDING DOGS Y ENGAGED. ARE FULL THE ST AND.

More information

OPERATOR S MANUAL Model 60010

OPERATOR S MANUAL Model 60010 OPERATOR S MANUAL Model 60010 10- TON SNAP LOCK PORTA POWER SET W/ WHEELED CASE PROFESSIONAL HYDRAULIC JACKS 1531 W. Mohawk Drive Phone 715-453-9602 Customer Service 800-995-2250 Tomahawk, WI 54487 Fax

More information

Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385

Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Owner's Manual Trolley Jack Model ATD-7304 Capacity 2 Ton! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol

More information

WARNING SPECIFICATIONS MODEL # A 1-1/2 TON TRANSMISSION JACK. Manufactured to comply with the ASME PASE-2014 Safety Standard.

WARNING SPECIFICATIONS MODEL # A 1-1/2 TON TRANSMISSION JACK. Manufactured to comply with the ASME PASE-2014 Safety Standard. MODEL # 791-7180 A 1-1/2 TON TRANSMISSION JACK BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING PROCEDURES, SAFETY S AND MAINTENANCE REQUIREMENTS. It is the

More information

8-TON LONG RAM DOUBLE PISTON JACK OWNER S MANUAL

8-TON LONG RAM DOUBLE PISTON JACK OWNER S MANUAL 8-TON LONG RAM DOUBLE PISTON JACK OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

Fast Lift Hydraulic Service Jack

Fast Lift Hydraulic Service Jack Fast Lift Hydraulic Service Jack Operating Instructions & Parts Manual Model Number ATD-7314 Capacity 3.5 Ton U.S. Patent No's. 5,946,912 6,199,379! This is the safety alert symbol. It is used to alert

More information

Service Jacks Operating Instructions & Parts Manual

Service Jacks Operating Instructions & Parts Manual Service Jacks Operating Instructions & Parts Manual Model Number HW93642 HW93652 Capacity 2 Ton 3 Ton Made in the U.S.A. This is the safety alert symbol. It is used to alert you to potential personal injury

More information

Hydraulic Truck Jack

Hydraulic Truck Jack Operating Instructions & Parts Manual Hydraulic Truck Jack Model Capacity 23221C 22 Ton 23222C (Low Profile) 22 Ton 23301 30 Ton Models 23221C & 23222C Model 23301! U.S. Patent No's. 5,341,723 & 5,94,912

More information

Owner's Manual Trolley Jack

Owner's Manual Trolley Jack Owner's Manual Trolley Jack Model ATD-7304 Capacity 2 Ton! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol

More information

SPECIFICATIONS CONTENTS:

SPECIFICATIONS CONTENTS: Model 3052 1,100 Lbs 2 Stage Transmission Jack INSTRUCTION MANUAL CONTENTS: Page 1 Specifications Page 2 Warning Information Page 3 Assembly Page 4 Operating Instructions Page 4 Preventative Maintenance

More information

Magic Lift TM Hydraulic Service Jacks Operating Instructions & Parts Manual

Magic Lift TM Hydraulic Service Jacks Operating Instructions & Parts Manual Blackhawk Automotive is a Licensed Trade Mark Made by SFA Companies, Kansas City, MO Magic Lift TM Hydraulic Service Jacks Operating Instructions & Parts Manual Model BH6057 BH6107 Capacity 5 Ton 10 Ton

More information

3 TONNE TROLLEY JACK

3 TONNE TROLLEY JACK 3 TONNE TROLLEY JACK 16407 These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent

More information

Operating Instructions & Parts Manual. Capacity 2 Ton 3 Ton

Operating Instructions & Parts Manual. Capacity 2 Ton 3 Ton Service Jacks Operating Instructions & Parts Manual Model Number HW93642 HW93652 Capacity 2 Ton 3 Ton Made in the U.S.A. This is the safety alert symbol. It is used to alert you to potential personal injury

More information

Hydraulic Bottle Jack Manual

Hydraulic Bottle Jack Manual Before using this product, read and understand this manual. Follow all Safety and Operating instructions. Failure to do so may result in severe personal injury and/or property damage. Save this manual

More information

Engine Crane Owner s Manual

Engine Crane Owner s Manual Engine Crane Owner s Manual Model Number ATD04 Capacity Ton WARNING: This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive

More information

ASSEMBLY & OPERATION INSTRUCTION MANUAL

ASSEMBLY & OPERATION INSTRUCTION MANUAL Sliding Bridge Jack 3,500 lbs. Capacity ASSEMBLY & OPERATION INSTRUCTION MANUAL TABLE OF CONTENTS Specifications... 2 Description & Features... 3 Installation Instructions... 4 Safety Instructions... 4

More information

Low Profile Service Jack

Low Profile Service Jack Low Profile Service Jack Operating Instructions & Parts Manual Model Number JSA200LCX Capacity 2 Ton MAC TOOLS INC. 2005 505 N. Cleveland Ave. Suite 200 Westerville, OH 43082 Printed in PRC Save these

More information

2.5 TON TROLLEY JACK WITH 360 HANDLE OWNER S MANUAL

2.5 TON TROLLEY JACK WITH 360 HANDLE OWNER S MANUAL 2.5 TON TROLLEY JACK WITH 360 HANDLE OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,

More information

Instruction Manual. Single Acting Hydraulic Aluminium Pull Cylinders RAP Series. Maximum Operating Pressure 700 bar

Instruction Manual. Single Acting Hydraulic Aluminium Pull Cylinders RAP Series. Maximum Operating Pressure 700 bar Single Acting Hydraulic Aluminium Pull Cylinders RAP Series Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au

More information

Fast Lift Service Jack, Low Profile

Fast Lift Service Jack, Low Profile Blackhawk Automotive is a Licensed Trade Mark Made by SFA Companies, Kansas City, MO Fast Lift Service Jack, Low Profile Operating Instructions & Parts Manual Model BH6023B Capacity 2 Ton! U.S. Patent

More information

Air / Hydraulic Under Axle Jack

Air / Hydraulic Under Axle Jack 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223

More information

Instruction Manual. Single Acting, Pancake, Locking Collar Hydraulic Cylinders RPLC Series. Maximum Operating Pressure 700 bar

Instruction Manual. Single Acting, Pancake, Locking Collar Hydraulic Cylinders RPLC Series. Maximum Operating Pressure 700 bar Single Acting, Pancake, Locking Collar Hydraulic Cylinders RPLC Series Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au

More information

Operating Instructions & Parts Manual

Operating Instructions & Parts Manual Operating Instructions & Parts Manual MagicLift Service Jack, Low Profile Model 29023 29025 Capacity 2 Ton 2 Ton 29023 29025 U.S. Patent No s. 6,199,379 5,946,912! This is the safety alert symbol. It is

More information

37 LITRE MOBILE SANDBLASTING UNIT

37 LITRE MOBILE SANDBLASTING UNIT OWNER S MANUAL PRODUCT CODE: 3008 37 LITRE MOBILE SANDBLASTING UNIT Working Air Hose Overall Tank Volume Pressure Consumption Length Dimensions 37 Litre 65 125psi 6-25CFM 2400mm 480 x 290 x 830 Made in

More information

Hydraulic Transmission Jack, Telescopic

Hydraulic Transmission Jack, Telescopic Operating Instructions & Parts Manual Hydraulic Transmission Jack, Telescopic Model 4000 400 (Air Operated) Capacity 000 lbs. 000 lbs. Model 4000 Model 400 U.S. Patent No. 6,02,377! This is the safety

More information

Manual Operated Floor Jack

Manual Operated Floor Jack Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply

More information