A Complete Family of Reliable Lubrication Equipment

Transcription

1 A Complete Family of Reliable Lubrication Equipment Real Solutions for Real People Field-Proven Performance Designed to Save You Money

2 Petroleum Management Group Products Graco Pumps Fast-Ball LD Pump Mini Fire-Ball 225 Fire-Ball 300 Fire-Ball 425 NXT Supply Systems Husky Diaphragm Pumps Ideal for lower volume, short-run transfers Handles up to 5 gpm (19 lpm)* Ratio for oil: 1:1 Ideal for low- to medium-volume applications Built-in thermal relief to protect product Handles up to 7.8 gpm (30 lpm)* Ratio for oil: 3:1, 5:1 Ratio for grease: 50:1 Ideal for low to medium volume applications In-line design with fewer parts for minimal pump wear, less downtime and maintenance Handles up to 2 gpm (7.5 lpm)* Ratio for oil: 3:1 Ratio for grease: 50:1 Ideal for medium volume, high-pressure fluid transfer High quality, corrosion-resistant design for longer pump life Handles up to 3 gpm (11 lpm)* Ratios for oil: 5:1 Ratios for grease: 15:1, 50:1 Graco Meters and Dispense Valves Ideal for the most demanding high-volume applications Also available in 55 gal (200 l), 120 lb (55 kg) or 400 lb (180 kg) cover-mounted packages for lube trucks Up to 13 gpm (49 lpm)* Ratios for oil: 3:1, 6:1, 10:1 Ratios for grease: 50:1, 75:1 Ideal for bulk transfer moves fluids fast! 31 gallons of oil or 57 pounds of grease per minute Ratios for oil: 3.5:1, 4.5:1, 6:1, 10:1,12:1 and 23:1 Ratios for grease: 14:1, 26:1, 29:1, 55:1, 63:1, 68:1 Simple, reliable transfer pumps ideal for oil, used oil, windshield wash, anti-freeze and fuel Flow rates: gpm ( lpm) Packages designed specifically for pre-mixed windshield wash also available Pro-Shot Control Valve SDV15 Control Valve XDV20 Control Valve Mechanical Meter XDM6 and XDM12 Meters LDM and LDP Meters SDM and SDP Meters Rugged design for harsh environments Pressure-assisted trigger for ease of operation Easy top adjustment with locking nut Multiple adapters available Working pressure up to 8,000 psi (552 bar) Dispenses motor oils, ATF, gear lube and anti-freeze Sturdy cast body designed for use in tough environments Lock-on trigger Indoor or outdoor use Multiple extensions available 1,500 psi (103 bar) Handles up to 15 gpm (57 lpm)* Dispenses motor oils, ATF, gear lube and anti-freeze High flow valve Sturdy cast body designed for use in tough environments Twist-lock-on/off trigger Indoor or outdoor use Multiple extensions available 1,500 psi (103 bar) Handles up to 20 gpm (76 lpm)* Graco Hose and Cord Reels Dispenses a variety of petroleum and synthetic based oils and anti-freeze Manual and pre-set dispense Indoor and outdoor use 1,500 psi (103 bar) Handles up to 8 gpm (30 lpm)* Durable design ideal for oil dispense in harsh environments Screw-tight nozzle for positive shut off Ball bearing swivel for ease of use Reset capable for periodic dispense history information Operating Temperature Range: -40 to 180º F (-40 to 82º C) 1,500 psi (103 bar) Handles up to 12 gpm (45 lpm)* Dispenses motor oils, ATF, gear lube and anti-freeze Manual and pre-set dispense models Automatic nozzle only Indoor use Multiple extensions available 1,000 psi (69 bar) Handles up to 5 gpm (19 lpm)* Reel Enclosures SD Cord and Light Reels LD Series SD Series 10/20 XD Series 10/20/30 XD Series 40/50 Dispenses motor oils, ATF, gear lube and anti-freeze Manual and pre-set dispense models High flow Indoor or outdoor use Multiple extensions available 1,500 psi (103 bar) Handles up to 14 gpm (53 lpm)* XD Series 60/70/80 Powered Reels Enclosures provide protection to extend the life of hoses and bearings Designed for enclosing the SD single pedestal reels End caps are easily removed for easy access to reels Enclosure mounting channels available to accommodate one to six reels High-strength steel construction for professional use Handles cord lengths up to 95 ft (29 m) Fluorescent or LED light with optional tool tap receptacle Duplex GFCI industrial or single Industrial receptacle cord reels Meets UL355*, CSA22.2 No. 21 and IP44 standards Designed for small service garages and repair shops Handles hose lengths up to 50 ft (15 m) Enclosed for safety and protection; extends hose life Multiple mounting options, including ceiling/wall, tote, bench or wall-mount post Easy spring tension adjustment Full-flow swivel maximizes fluid flow with minimal pressure drop Designed for daily use applications such as dealerships, fleet services and maintenance facilities Handles hose lengths up to 65 ft (20 m) Long-lasting spring provides constant spring torque through the entire range of motion Multiple mounting options Durable steel spool for demanding applications Open swivel ports ensure high fluid flow with minimal pressure loss Designed for robust, heavy-duty applications Handles hose lengths up to 75 ft (23 m) Dual pedestal frame provides increased strength for extremeduty applications Long lasting spring is sealed for protection against the weather Durable steel spool rides on sealed roller bearings to ensure trouble-free performance Graco Diesel Exhaust Fluid (DEF) Dispensing Solutions LD Blue Electric Pumps LD Blue Manual Pumps SD Blue AODD Pumps LD Blue Meter SDI15 In-Line Meter Designed for robust, heavy-duty applications Handles hose lengths up to 100 ft (30 m) Fully ported swivel and shaft for unrestricted flow Heavy-duty ball bearings outlast sleeved-type bearings Easy rewind with minimal hose guidance Overhead mounting kit available LD Blue Automatic Dispense Nozzles Designed for robust, heavy-duty applications with powered rewind Handles hose lengths up to 150 ft (46 m) Hydraulic, electric, and pneumatic direct drive options Fully ported swivel and shaft for unrestricted flow Industrial-grade paint for high abrasion and corrosion resistance SD Blue Dispense Nozzles 1 Reliable, industrial pump with self-priming capabilities 120V or 12V electric pump Maximum flow rate of 9 gpm (120V) or 9.5 gpm (12V) 120V pump includes auto shutoff timer Lightweight, reliable, and costeffective solution for dispensing DEF from 55 gallon drums Quick drum installation and change out with integrated two inch bung adapter Fast delivery capable of 11 oz. per stroke Adjustable telescoping down tube Superior-performing AODD pump capable of higher output over longer runs Maximum flow rate of 15 gpm Rugged construction resists corrosion for reliable performance and long life Easy-to-service air valve and ball checks Easy to install use in-line or at the end of the dispense hose Impulse signals single channel, or reed switch gpm flow rate 145 psi maximum pressure 1 BSPP(m) inlet and outlet Includes 1 BSPP(f) coupler Easy to use for DEF solutions (in addition to motor oils, ATF, and anti-freeze) dispenses pints, quarts, liters, or gallons Tracks totals in two modes reset for periodic history and non-reset for meter life Durable design for rugged, indoor use gpm flow rate 1500 psi maximum pressure Break-Away System for low-cost repairs if the spout becomes detached Choose with or without builtin meter 4-12 gpm flow rate 50 psi maximum pressure 3/4 BSPP inlet Heavy duty design Automatic shut-off valve with stainless steel nozzle 11 gpm flow rate 50 psi maximum pressure 3/4 BSPP inlet

3 LD Pump, Reel and Meter Performance Runs in the Family State-of-the-Art Design Each product in the LD family has innovative features built-in, plus advanced technologies designed to save you money and provide reliable performance and long life at a competitive price. More Configurations Choose drum, tote or wall mount applications with multiple meter, pump and reel choices. Industry Leading Warranty Graco offers one of the best warranties in the business 5 years on all our LD Series family products.* * Two years on LD Meter electronics Everything you need right out of the box Choose from a variety of dispense solutions. From the economical drum package to the high-performance tote packages, every solution is designed with the highest quality components for trouble free operation. Three Inch Air Motor Provides more power to create better flow. NXT Air Valve Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime. Engineered for Durability Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution. Modular Air Valve Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations. Pilot Valve Patent-pending self cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow. Adjustable Bung Adapter Included Built-in slide adjustment with easy-set hand screws is easier to fit into more applications. Built-In Thermal Relief and Inlet Strainer Built-in thermal relief (oil only) protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump. Professional Fluid Transfer Technology 2

4 DEF Dispensing Systems Choose from more configurations to get exactly what you need for your business. The complete package everything you need to get up and running fast. All packages come with quick changeover inlet kit, air controls, air-operated double diaphragm pump, supply hose and auto shut-off nozzle. Simple bolt together assembly with no special tools. Tote Mount Wall Mount Why Graco? Value built-in Choose from a variety of dispense solutions. From the economical drum package to the high-performance tote packages, every solution is designed with the highest quality components for trouble free operation. Uses long lasting BSPP seals for fewer leaks and a clean work environment. Field-proven pump provides years of reliable operation. Efficient, money saving operation Versatile Husky 515 pump delivers up to 15 gpm (57 lpm) works on as little as 20 psi (1.4 bar) for money saving efficiency and is capable of 50 psi (3.4 bar) to provide high output over a long run of hose or piping. Powerful design has superior suction and lift for deep tanks or totes. Choose the best of both in one pump power plus efficiency. Clean transfer solution Quick change inlet kit provides strong seal between drum coupler and insert to prevent tank to tank contamination easy to disconnect pump from empty tank leaving behind contaminated down tube. Everything you need right out of the box A cost-effective system designed to serve multiple markets and applications. Choose from three configurations to fit your needs. Drum Mount Note: In-line meter is optional. Check ordering information for the package that best fits your needs. 3

5 Matrix Total Fluid Management System Ideal for car dealerships, truck dealerships, off-road maintenance shops, including mining and construction, fleet facilities, fast lubes, service shops and in-plant applications 5 Steps to Choose Your System Fluid dispense and inventory control at your fingertips for petroleum, synthetic oil products and anti-freeze mixtures Select Application Software Matrix offers three software platforms using the Matrix meter including Premier, Professional and Basic. Include a Transceiver Sends and receives information from the meters, Tank Level Monitors and Pump Air Control to the work station. Security with the Pump Air Control Supplies air to the pump only when Matrix authorizes the dispense. Performance of the Matrix Meter The Matrix Meter dispenses fluid and communicates dispense information wirelessly to the PC. The Time-Saving Tank Level Monitor Ultrasonic signal accurately measures fluid levels and communicates to used oil recyclers or bulk fluid suppliers. Pump Air Control 3 5 Tank Level Monitor 2 Transceiver Meters Work Station 4 1 Tracking dispenses right to the work order saves time and eliminates lost inventory 4

6 Pumps for Any Industrial Application The Ultimate in Centralized Lubrication Pumps From your smallest jobs to your largest machines, Graco pumps are at the heart of any centralized lubrication system. Add a wide variety of quality metering devices, controllers and accessories to get a complete system for nearly any performance, input power or mounting requirement. With Graco you can be sure every piece of equipment in your plant gets the right amount of lubrication where and when it needs it. With Graco automatic lubrication systems you get: Increased productivity longer machine life and reduced downtime Reduced operating costs reduced repair labor and component costs More efficient lubrication small, carefully controlled amounts when needed Graco Automatic Lubrication Systems apply the correct amount of lubrication in the right place at the right time Manual Lubrication Automatic Lubrication Over Lubrication Excess heat build-up Wasted lubricant Unnecessary labor cost Optimal Lubrication Under Lubrication More component wear Higher energy usage Increased operating costs Amount Time Amount Time EXAMPLE: Infrequent filling of the bearing results in periods of over and under lubrication EXAMPLE: Maintain optimal lubrication by replenishing only the lubricant that is used, with small amounts at frequent intervals 5

7 Dyna-Star Hydraulic Pump Long-lasting, flexible design saves money and is easy to use and install Achieve full pressure performance by safely tapping low pressure hydraulics Pre-packaged modules ready-to-work with both injector and divider valve systems Multiple pump and accessory options for use with refinery drum and custom tank installations Self-lubricating for long life and reliable operation Ultra-quiet hydraulic motor - no need for add-on mufflers High efficiency motor design uses less hydraulic oil GL-1 and GL-11 Injectors Exclusive seal design for up to 30% longer life Field adjustable output for most every application Trabon Divider Valve Assembly Accurately meters lubrication to each point Add performance indicators to ensure vital components have been lubricated Level Indicator Positive, at-a-glance indication of reservoir lubrication level Auto shut-down when low level is reached Rugged Digital Controller Full featured performance time- or pressure-based control to monitor reservoir levels and system pressure Follower Plate Innovative design forces grease into the pump for consistent operation Pressure Switch Lets the controller know when optimum system pressure is reached ensuring complete lubrication cycle Field-Proven Graco Fire-Ball Grease Pump Lower Double-acting piston design - the industry standard for long life For optimal system performance NLGI #1 grease is recommended Detail of back side of module assembly. Center-Feed Vent and Refill Port Located below follower plate for trouble-free venting and refilling Built-In Gauge Conveniently monitor hydraulic output pressure Pressure and Flow Control Ability to adjust pressure and flow puts you in control 6

8 G3 Electric Pumps Introducing the G3 electric lubrication pump With its flexible design, including adjustable pump elements and an ability to work with both injector-based and series progressive systems, G3 is a rugged, cost-effective pump designed to serve multiple markets and applications. Three control choices also mean added flexibility for easy lube system set-up, operation and troubleshooting. Extend machinery life, reduce operating costs and increase productivity with a G3 today! Two-in-one versatility Use with Series Progressive or Injector based systems or a combination of both all from one pump Series Progressive Injectors Powerful pumping performance G3 delivers up to 5100 psi (352 bar) for handling NLGI #2 grease, even in cold temperatures IP69K Two reservoir styles to choose from Stirring paddle with wiper arm breaks up air pockets and helps prevent grease separation Follower plate design allows for operation in any orientation; includes stirring paddle to help prevent grease separation One, two or three pump elements G3 comes standard with one pump installed Add up to two more pump elements for higher output on large projects AC and DC power choices - G3 makes it easy! Flexibility to connect to DC (12 or 24V) and AC (90-240V) power sources in both CPC and DIN-style connectors Adjustable stroke pump G3 comes standard with an adjustable output pump. Its straight- forward design makes increasing or decreasing the pump displacement as simple as adding or removing a Stroke-Adjust Spacer. No need to purchase additional fixed output pump element sizes to meet your specific lube requirements No need to purchase a separate, high-priced adjustable output pump with G3, adjustability comes standard! 7

9 G3 Electric Pumps Standard, Pro and Max Choose the level of control you need for your series progressive or injector based applications. G3 Standard No internal controller use with separate or existing machine control for a low cost solution Capable of sending a low level signal to your external controller or PLC G3 Pro Built-in controller with selectable pump on/pump off timer Low level indicator provides low warning and shut-down alarm Manual run initiates lube cycle on-demand (remote option also available) Password protection safeguards settings Pre-lube function can initiate lube cycle on start-up Check out the full-featured G3 Max Easy-to-read LED display Clearly identified pump on/off indication Monitoring of up to three independent zones Programmable machine count feature Alarm signal of lube system shutdown Warning signal prior to lube system shutdown Low level indication Password protected access to control Pre-lube capability Easy-to-use navigation keys G3 Max Built-in controller with selectable pump on/pump off timer Low level indicator provides low warning and shut-down alarm Manual run initiates lube cycle on-demand (remote option also available) Password protection safeguards Pre-lube function can initiate lube cycle on start-up Up to three pressure or cycle switch inputs to ensure proper lubrication cycles Mix/match cycle and pressure switches for custom installations and feedback Machine count input ideally suited for inconsistently used equipment Fault indication to external alarms Optional Data Management System (DMS) Tech Specs Max Pressure psi (352 bar) Power VDC, 24 VDC, VAC Operating Temperature.-13 to 158 ºF (-25 to 70 ºC) Reservoir Size... 2, 4, 8, 12, or 16 liter Adjustable Pump Output Per Element Per Minute in 3, 0.18 in 3,, 0.25 in 3 (2 cm 3, 3 cm 3, 4 cm 3 ) Lube Type... Oil or Grease, up to NLGI #2 Certifications/Ratings...CE, ETL*, IP69K *Conforms to UL 73, certified to CSA 22.2 No Instruction Manual...3A0414 8

10 Dyna-Star HP and Dyna-Star HF Electric Lubrication Pumps New innovations, like tube-in-tube vent and fill path, Advantage Drive, auto-fill shut off, and adjustable motor controls give you mobile lubrication capabilities like never before. Super-efficient design delivers the right amount of lubrication at the right time all in a neat, compact system. Power Input Motor Speed Adjustment to match lube requirements to your environment Current Control to fine-tune motor amperage Signal Input from GLC Controller Versatile and Hassle Free 24 VDC electric lubrication pump Supplies grease to injector-based, series progressive and dual line metering systems High pressure (HP) model is capable of 5,000 psi (344 bar) with a maximum output of 18 cubic inches (295 cc) per minute High flow (HF) model is capable of 3,500 psi (241 bar) with a maximum output of 25 cubic inches (410 cc) per minute Top Quality Lubrication for: Mining Operations Heavy-duty Construction Industrial Applications Milling and Crushing Well Services Status Lights for easy troubleshooting Safely Move Pump Built-in lift ring is rated to 500 lbs (226 kg) Graco Advantage Drive High quality helical hardened steel gears are lubricated for life and sealed to keep contaminants out for longer lasting performance. Field-proven for the last ten years to be the longest lasting drive in the industry. Direct Mount Electric Vent Valve Mounts directly to pump with no special brackets or hoses for a compact design and less parts to break or wear out. Deutsch connector is IP69K rated to keep out moisture. Built-in pressure relief for safety and compact, efficient installations. Cavitation-free Fill and Vent Path Provides simple and direct venting and filling to the foot of the pump. No cavitation due to improper filling and venting with no external vent hoses or extra internal pipes. Convert a standard drum to an injector pump station in minutes. Adjustable Motor Control Auto Fill Shut Off Innovative mechanical design that physically actuates a shut off of the fill pump for clean, trouble-free refilling. No electronics necessary, but proximity switch can be added for electronic signal for full reservoir. Strong 12 Gauge Steel Reservoir Available in 60 lb (27 kg) or 90 lb (41 kg) reservoirs with alternate fill and vent ports that deliver lube straight to the bottom of the pump. Common bolt pattern for easy drop-in replacement without drilling or adapter plates. Choose Your Level of Control Dip Stick For visual indication of lube level Low Level Quick visual level indication with electronic signal to GLC 2200 or GLC 4400 controller Auto Fill Shut Off Avoid over- or under-filling with this cost-effective mechanical solution. Visual indication of a full reservoir or connect to proximity switch for electronic indication. 9

11 LubePro Series Pumps Field-Proven Reliability For nearly 50 years, Graco Fire-Ball pumps have been a mainstay in the lubrication marketplace for durability and long life. Designed for the toughest applications, the Fire-Ball repeatedly outperforms and outlasts the competition. LubePro series pumps leverage the same proven quality and leading technology. Designed to Perform LubePro series pumps offer a robust solution where high output and fast lubrication cycles and flow rates are needed to optimally lubricate equipment while it s working. Our robust design has been tested to outperform the competition. Positive Impact to Your Bottom Line LubePro is the choice of lubrication professionals, because it positively impacts your company s bottom line by automatically providing the optimal amount of lubrication at the right time. LubePro Horizontal Pumps Extends equipment life Improves productivity Reduces downtime Reduces repair costs Reduces operating costs Improves employee safety Two reservoir types 2 liter reservoir available in grease or oil. Select from the 19:1 oil pump or the 26:1 grease pump. High-strength, shatter-resistant reservoir Utilizes a high-quality, polycarbonate reservoir that is securely mounted to the pump with rigid tie rods for optimal sealing Easy to install Utilize existing mounting holes for easy replacement and installation Fire-Ball pump casting Leverages the proven quality and long life of Graco s Fire-Ball pump. Eliminates tie rods and end cap. Low level detection option Reliable, Graco factory-installed low level indicator that is easy to connect using a simple DIN connection Fast cycle rate and flow Cycles and vents lubricant injectors in as little as 10 seconds. 2.2 in3 of grease per stroke and 3.0 in3 of oil per stroke. Self-venting pump Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required No priming required No need to bleed the valve to prime the pump, no priming is required Pneumatic Power Easily installed into existing air line Vertical Pumps are also available 10

12 Series Progressive Divider Valves Trabon MD Series Trabon The Trabon MD Series is the most compact series progressive solution making it a perfect fit for tight spaced applications. Features Available with 2, 3, 4, or 6 outlets Easy to install on new or existing equipment Use our cycle indicator pin models to provide positive assurance of a successful lube event Typical Application Industrial or mobile applications where space is at a premium USP Uniblock Series Progressive Trabon USP is an economical option to solving your lubrication system needs. It serves as a high quality entry point to move away from manual lubrication, and is smaller than competitive mono blocks to save valuable machine space. Features Series progressive metering in a one piece block no assembly required! Space efficient design with 6, 8, 10, 12, 14, or 16 outlets. Outlets can be combined to meet larger bearing needs Requires no special fittings, all fittings come with the valve block Built-in outlet check valves ensure accurate lube delivery, every time Works with standard MSP magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Typical Application Mobile, industrial, food & beverage, wind, and many more Trabon MJ Series The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1. Features Space efficient from 6 to 16 points from one block assembly Built-in outlet check valves ensure accurate lube delivery, every time Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Typical Application Machine tools, textile, glass & can machinery, & mobile equipment Trabon MSP Series The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best! Features Quick change valve sections can be removed from the base assembly without disturbing any lube lines minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery, every time Pre-Assembled and Tested Base Plates Now Available! Typical Application Mobile, industrial, food & beverage, wind, and many more 11

13 Series Progressive Divider Valves Pre-Assembled and Tested Base Plates Now Available! Manzel MHH Series Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances. The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure oil applications. Features Quick change valve sections can be removed from the base assembly without disturbing any lube lines minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery, every time Trabon MX Series Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with it s economical and compact design. Typical Application Compressors, industrial equipment, textile and mobile equipment Features Durable design withstands harsh environments and operating conditions Built-in outlet check valves ensure accurate lube delivery, every time Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Typical Application Pulp and paper, steel mills, heavy and high volume industrial applications Trabon MXP Series Trabon MGO Series The Trabon MXP Series greater output volume makes it easy to customize your assembly to meet larger machine requirements. Features Quick change valve sections can be removed from the base assembly without disturbing any lube lines minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery, every time Typical Application Pulp and paper, steel mills, heavy and high volume industrial applications The Trabon MGO Series offers the largest output available in a series progressive system. Ideal for heavyduty and large bearing applications with wide temperature variations and high volume requirements. Features Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Typical Application Pulp and paper, steel mills, heavy and high volume industrial applications 12

14 GL-1 Injector Precision-honed Components for Reliable Operation in the Harshest Environments Graco s captured seal design is the best in the business! Test results show the difference GL-1 injectors showed no seal leakage at 215,000 cycles Seals last 5 times longer than the competition s! Combine with GL-11s and GL-32s in the same Single Line Parallel System for a full range of outputs Technical Specifications Maximum operating pressure 3500 psi (241 bar) Minimum operating pressure 1850 psi (128 bar) Suggested operating pressure 2500 psi (172 bar) Reset pressure 600 psi (4.1 bar) Output volume per cycle in 3 ( c 3 ) Recommended fluids Uses NLGI #2 grease down to 32 F (0 ºC) Instruction manual Design Guide 309 Zerk Fitting Outlet 1/8 in npt Supply Line Outlet 1/4 in npt Inlet 3/8 in npt To adjust: 1. Loosen the lock nut 2. Rotate 5/8 inch output adjustment nut clockwise to decrease grease output decrease the travel of the piston 3. Rotate 5/8 inch output adjustment nut counter-clockwise to increase grease output increase the travel piston Adjustment Screw Visual Indicator Pins Lock Nut Supply Line Outlet Zerk Fitting with Cap Mounting Holes Same as the competion for an easy retrofit 13

15 GL-32,33,42,43 Grease Injectors Precision-honed Components for Reliable Operation in the Harshest Environments Accurate, reliable and adjustable lubrication for every lube point on your machine Longer lasting seal design for troublefree performance Easy to design, setup and operate Flexible add or subtract lube points without redesigning your system High performance handles up to NLGI #2 grease Maximum operating pressure Minimum operating pressure Typical operating pressure Reset pressure GL-32 GL-43 GL-33 GL psi (241 bar) 1200 psi (83 bar) 1500 psi (103 bar) 200 psi (13.7 bar) 1000 psi (69 bar) 750 psi (52 bar) 850 psi (59 bar) 150 psi (10 bar) 3500 psi (241 bar) 1200 psi (83 bar) 1500 psi (103 bar) 200 psi (13.7 bar) 1000 psi (69 bar) 750 psi (52 bar) 850 psi (59 bar) 150 psi (10 bar) Output volume per cycle in 3 ( cm 3 ) in 3 ( cm 3 ) Maximum temperature rating 350 F (176 C) Recommended fluids Grease up to NLGI #2 SAE 10 weight oil minimum Grease up to NLGI #2 SAE 10 weight oil minimum Adjustable to fit any machine One Piece Cast Injector One piece design for added durability Output Adjustment Nut Adjustable output volume from in 3 ( cm 3 ) makes it easy to customize each individual lube point Visual Indicator Pin Convenient front-mounted cycle pin indicator confirms that the injector is functioning properly 14

16 ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers systems, products and technology that set the quality standard in a wide range of fluid handling solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco s ongoing investment in fluid management and control will continue to provide innovative solutions to a diverse global market. SALES/ DISTRIBUTION/ SERVICE Contact us today! For more details us: info_aplube@graco.com or visit: Anoka, MN, US Shanghai, China Suzhou, China 2015 Graco Inc Rev. A 06/2015 Printed in China. All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.