BT-1.5, BT-1.5-LP (NITRO) POWER UNIT Operations Manual

Size: px
Start display at page:

Download "BT-1.5, BT-1.5-LP (NITRO) POWER UNIT Operations Manual"

Transcription

1 BT-1.5, BT-1.5-LP (NITRO) POWER UNIT Operations Manual BT-1.5 BT-1.5-LP TNT Rescue Systems, Inc West Oak Street Ashippun, WI or WARNING! Read This Manual Before Operating Equipment TNT-OM # Rev: 05/23/12 1/38

2 INDEX 1) INTRODUCTION 3 2) SAFETY INFORMATION 4 3) BEFORE OPERATION CHECKS 5 4) HYDRAULIC FLUID INSTALLATION 6 5) COUPLER OPERATION 7 6) STANDARD 10,500 PSI COUPLER OPERATION 7 7) FLAT FACE 10,500 PSI COUPLER OPERATION 8 8) STANDARD 5,500 PSI COUPLER OPERATION 9 9) NEXUS 5,500 AND 10,500 PSI COUPLER OPERATION 10 10) PUMP OPERATION 11 11) TOOL OPERATION 12 12) GENERAL MAINTENANCE 12 13) STORAGE 13 14) DECONTAMINATION 13 15) LIMITATION 13 16) TOUBLE SHOOTING 14 17) ROUTINE MAINTENANCE 15 18) MAINTENANCE RECORD 16 19) WARRANTY 17 20) WARRANTY REGISTRATION 18 21) SPEC SHEET BT ,500 PSI 19 22) SPEC SHEET BT-1.5-LP 5,500 PSI 20 23) MSDS SHEET 10W-30 MOTOR OIL ) MSDS SHEET ISO 68 HYRDAULIC OIL ) MSDS SHEET FIRE RESISTANT HYDRAULIC OIL ) NOTES 37 TNT-OM # Rev: 05/23/12 2/38

3 INTRODUCTION The employees of TNT Rescue Systems, Inc. and your local dealer thank you for selecting our quality products. We want to help you to get the best results from your new rescue equipment and to operate it safely. This manual contains basic information on how to do that; please read it carefully before operating your equipment. Our commitment to you and your equipment begins with quality production and service. All information in this manual is based on the latest product information available at the time of printing. TNT Rescue Systems, Inc. reserves the right to make changes at any time without notice and without incurring any obligation. No part of this publication may be reproduced without the written consent of TNT Rescue Systems, Inc. This manual should be considered a permanent part of the tool, and should remain with the rescue equipment if resold. When you need warranty repairs, your authorized dealer is responsible for taking care of your equipment. Certain repairs could require your equipment to be returned to the factory. In the event your local dealer cannot repair your equipment, the dealer may provide you with loaner equipment until the factory can make the necessary repairs. If you should need customer assistance, parts, accessories, or service, please contact your local dealer: If you cannot reach your local dealer, contact TNT Rescue Systems at: TNT Rescue Systems, Inc West Oak Street Ashippun, WI or TNT-OM # Rev: 05/23/12 3/38

4 !! IMPORTANT SAFETY INFORMATION!! IN THE EVENT OF ANY DAMAGE TO YOUR TNT RESCUE EQUIPMENT, REMOVE THE TOOL FROM SERVICE AND CONTACT YOUR AUTHORIZED TNT SERVICE REPRESENTATIVE Understand the operation of all controls and learn how to stop the engine quickly in case of emergency. Make sure the operator receives adequate instructions before operating the equipment. Do not allow children to operate the equipment. Keep children and untrained personnel away from the area of operation. Your engine s exhaust contains poisonous carbon monoxide. Do not run engine without adequate ventilation, and never run engine indoors. The engine and exhaust becomes very hot during operation. Keep engine at least 1 meter (3 feet) away from buildings and other equipment during operation. Keep flammable materials away, and do not place anything on engine while it is running. Prior to and after each use, the tools, hoses, and connections should be cleaned and inspected for damage. Only trained and qualified personnel should use extrication equipment! Before any operation begins, the object to be worked on must be stabilized. When operating rescue tools always wear a full complement of protective equipment including, but not limited to: Protective clothing covering the arms, legs, and neck Helmet with face shield and eye protection Protective gloves Boots Do not mix 10,500psi hydraulic equipment with 5,500psi equipment. Never reach between the cutter blades, or spreader arms. Do not position yourself between the rescue tool and an object to be worked on. When spreading or cutting, be sure to control all material being moved, avoid creating projectiles. Never disconnect the hoses, couplers, fittings, etc. under pressure. Never cut objects under tension or pressure (ex. shock absorbers, springs, pressurized cylinders). CUTTING THESE AND SIMILAR OBJECTS RISKS INJURY TO THE OPERATOR AND BYSTANDERS FROM PROJECTILE PIECES. Do not cut or crush fuel tanks, lines, or fill hoses. Use caution in cutting, crushing, or spreading as to avoid hazards in vehicle construction such as: air bag controllers and components, seat belt pre-tensioners, and onboard computers. If at any time the cutter twists or rolls, stop cutting immediately and reposition the tool. Not maintaining a 90-degree working angle could result in cutter blade damage. Be sure not to cut any hardened material. Never cut energized electrical cables. Avoid cutting a loose end of materials. The cut portion could become a projectile. If cutting a loose end is absolutely necessary, be sure to secure the loose end. There are no user serviceable parts on your TNT rescue equipment. Damaged hoses or equipment should not be used. Only use TNT Hydraulic fluid in your TNT rescue tools. Do not store rescue equipment under pressure never leave a tool in the fully open or fully closed position. Never leave a working tool unattended. FAILURE TO HEED THESE WARNINGS MAY RESULT IN PERSONAL INJURY, UNNECESSARY PROPERTY DAMAGE AND OR DEATH. TNT-OM # Rev: 05/23/12 4/38

5 Before Operation Checks: 1) Remove product from shipping container. 2) Product should consist of ( 1- Power Unit, 1-Gallon of Hydraulic Oil, 1- actual crankcase volume of 10w-30 Motor Oil, 1- Power Supply Operating Manual and 1-Honda Motor Owner s Manual ) 3) Check for any visual damage (If damage has occurred during shipping please contact carrier.) 4) Be sure to read the engine s owner manual completely before operating the equipment. 5) Remove all dirt or debris, especially around the muffler and recoil starter and couplers. 6) Look around and underneath the power unit for signs of oil or gasoline leaks. 7) Check engine fluid levels. (See Honda motor owner s manual) 8) Be sure the control valve is in the neutral position. Control Valve Neutral Position TNT-OM # Rev: 05/23/12 5/38

6 Hydraulic Fluid Installation: 1) Remove the vent/filler Plug using an 11/16 open end wrench turning counterclockwise. Vent / filler Plug 2) Using a funnel, pour the hydraulic fluid into the vent/filler hole until the proper level is reached on the sight glass. (1/2 3/4 in the sight glass) Sight Glass Oil Level 3) Replace vent/filler plug, tighten clockwise securely. TNT-OM # Rev: 05/23/12 6/38

7 Coupler Operation: Standard 10,500 PSI Coupler Operation 1) Rotate locking collar counter clockwise until it lines up with pin and pull back to the open position.(see Fig. 1) 2) Insert the male coupler into the female coupler and release the locking collar to the locked position. (See Fig. 2) 3) Pull on couplers to confirm a completed connection. 4) To release, rotate locking collar clockwise to line up with pin and pull back to release the male coupler. Open Position Locked Position Insert Male Coupler Locking Collar Pull Back Rotate Pin Female Coupler Fig. 1 Fig. 2 TNT-OM # Rev: 05/23/12 7/38

8 Flat Face 10,500 PSI Coupler Operation: 1) Insert the male coupler into the female coupler until it snaps in the locked position.(see Fig. 1) and (Fig. 2) 2) Pull on couplers to confirm a completed connection. 3) To release, rotate locking collar clockwise until it stops and pull back to release the male coupler. (See Fig. 2) Open Position Locked Position Insert Male Coupler Locking Collar Rotate Pull Back Female Coupler Fig. 1 Fig. 2 TNT-OM # Rev: 05/23/12 8/38

9 Standard 5,500 PSI Coupler Operation 4) Rotate locking collar counter clockwise until it lines up with ball and pull back to the open position.(see Fig. 1) 5) Insert the male coupler into the female coupler and release and rotate the locking collar clockwise to the locked position. (See Fig. 2) 6) Pull on couplers to confirm a completed connection. 7) To release, rotate locking collar counter clockwise to line up with ball and pull back to release the male coupler. Open Position Locked Position Male Coupler Insert Locking Collar Rotate Pull Back Ball Female Coupler Fig. 1 Fig. 2 TNT-OM # Rev: 05/23/12 9/38

10 Nexus 5,500 and 10,500 PSI Coupler Operation: 1) Line up the alignment screws. (See Fig. 1) 2) Insert the male coupler into the female coupler and rotate clockwise until it snaps into the locked position. (See Fig. 2) 3) Pull on couplers to confirm a completed connection. 4) To release, pull back the Locking collar and rotate the male coupler counter clockwise and remove from female coupler, release collar.(see Fig. 2) Open Position Locked Position Male Coupler Rotate Insert Rotate Alignment Screws Locking Collar Pull Back Female coupler Fig. 1 Fig. 2 TNT-OM # Rev: 05/23/12 10/38

11 Pump Operation: 1) Before operating the power unit, be sure the control valve is in the neutral position. Neutral Position Control Valve Rotate Clockwise 2) Connect one end of the hydraulic twin line hose to the power unit and the other end to a rescue tool. (See coupler operation for specific coupler being used, pages 7,8,9 ) 3) BE SURE TO PULL ON ALL COUPLER S TO INSURE A COMPLETED CONNECTION! 4) Once the connections are made, the power unit can be started. Starting The Power Unit: 1) Starting the gas engine, refer to the engine s operation manual and guidelines supplied with this product. Power Unit Operation: 1) Once the rescue tool and hydraulic twin line hose have been properly connected and the engine started, engage the control valve on the power unit to the pressure position to allow the hydraulic oil to circulate through the rescue tool.( Note: Never engage the power unit without a hydraulic hose and rescue tool connected) Pressure Position Rotate Counter Clockwise Control Valve TNT-OM # Rev: 05/23/12 11/38

12 Tool Operation: 1) Once the power unit, rescue tool and hydraulic twin line hose have been properly connected and the pump control valve engaged to the pressure position, the tool is ready to operate. 2) Check the operation of the rescue tool by turning the control valve on the tool to the open and closed position.(see the rescue tool operation manual) Fully open and close the rescue tool one to two times to purge any air from the system. 3) The Rescue tool is equipped with a dead man feature. When the valve is released it will return to the neutral position and stop the operation of the rescue tool. 4) Once the use of the rescue tool is done or a tool change is needed, return the control valve on the power unit to the neutral position.(note: TNT hydraulic hoses and rescue tools are equipped with a pressure relieving coupler, disconnecting hoses and or rescue tools with the control valve on the power unit in the pressure position will cause hydraulic fluid to be released to the environment.) General Maintenance: 1) Disconnect hydraulic hose and rescue tool from the power unit before working on any equipment. 2) Visually inspect for loose or missing parts. 3) Check couplers for proper operation and cleanliness. Remove all dirt and debris from dust covers. 4) Check engine oil, change oil per manufacturer s guidelines. 5) Check fuel level, fuel should be changed periodically in order to reduce the chance of fuel problems.(see engine operation manual). 6) Check hydraulic fluid level, fill to ½ to ¾ on the sight glass.(see hydraulic fluid installation, page 6). 7) Run the power unit and operate the rescue tools, check for proper operation of the power unit and rescue tools. 8) Clean the pump by lightly spraying with a silicone based protectant and wipe clean. TNT-OM # Rev: 05/23/12 12/38

13 Storage: 1) Never store your power unit and rescue tools under pressure. 2) Always store power unit with fuel valve off. 3) Turn the engine switch to the on position and the choke lever to the on position to be ready for next use. 4) Store your power unit and rescue tools in a clean, dry location. 5) Be sure to store your power unit and rescue tools securely, loose tools can cause serious injury or property damage. 6) Power unit should only be stored in the upright position. 7) Do not store a hot engine in an enclosed compartment. 8) Replace dust covers on couplers. Decontamination: In the event your TNT rescue equipment is exposed to blood borne pathogens, chemicals, hazardous materials, etc., follow your department s standard blood borne/hazardous materials guidelines for equipment decontamination. Limitations: Your TNT rescue equipment is intended for use in automobile extrication. Due to the variety of vehicle construction styles and materials, and the inherent unpredictability of vehicle accidents, please consult your authorized TNT representative with questions regarding the limitations of these tools. The Important Safety Information (page 2) section of this manual provides basic guidelines to help ensure your safety and that of victims, bystanders, and other rescuers. TNT Rescue Systems, Inc. recommends that only trained and qualified personnel operate this equipment. Manufacturers Data: Your TNT rescue equipment is made in the USA. Final assembly and testing of the tool, as well as the manufacture of all major components takes place at the TNT world headquarters in Ashippun, Wisconsin. Feel free to contact TNT directly with any questions, comments, or concerns about your TNT rescue equipment. TNT-OM # Rev: 05/23/12 13/38

14 Trouble Shooting: PROBLEM CAUSE REMEDY The couplers cannot be connected. 1) There is dirt or debris in the coupler. 2) The system is under pressure. 1) Remove the debris and ensure the couplers are clean. 2) Disengage the pump. The tool does not react when turning the valve to the open or closed position. 1) The power unit is in the neutral position. 2) The power unit in not running 3) The tool is not properly connected. 4) There is an insufficient amount of hydraulic fluid in the power unit. 1) Engage the power unit. 2) Start power unit 3) Ensure that couplers are connected. 4) Fill power unit to the proper level. Engine will not start. 1) The switch is in the off position. 2) The pump is engaged. 3) The oil level switch on the engine is activated. 4) The choke is in the wrong position. 5) The power unit is out of fuel. Recoil will not pull. 1) The power unit is engaged. 2) The recoil case is damaged. 1) Turn the switch on. 2) Return the control valve to the neutral position. 3) Add engine oil to proper level. 4) Adjust the choke according to the engine operation manual. 5) Check and add fuel. 1) Return the control valve to the neutral position. 2) Contact your authorized TNT Service Representative. *Call Your Authorized TNT Distributor For Maintenance And Annual Service Care / Preventative Maintenance.* TNT Rescue Systems, Inc West Oak Street Ashippun, WI or @tntrescue.com TNT-OM # Rev: 05/23/12 14/38

15 Routine Maintenance Schedule: Daily Inspection Visually inspect all tools and components for damage, leaks and general cleanliness. Inspect couplings; insure smooth operation, clean with silicone spray if necessary. Check fluid levels in power unit: Motor Oil Hydraulic Oil Fuel Operate the power unit. Run engine and power at least one tool. Allow engine to run until normal operating temperature is reached. Add fuel if necessary. Weekly or after use inspection Visually inspect all tools and components for damage, leaks and general cleanliness. Additionally: Inspect cutter blades, look for debris in yoke area Inspect spreaders for debris in yoke area. Inspect couplings; insure smooth operation, clean with silicone spray if necessary. Check fluid levels in power unit: Motor Oil Hydraulic Oil Fuel Operate the power unit. Run engine and power at least one tool. Allow engine to run until normal operating temperature is reached. Add fuel if necessary. Monthly Inspection Visually inspect all tools and components for damage, leaks and general cleanliness. Additionally: Inspect cutter blades, look for debris in yoke area Inspect spreaders for debris in yoke area Inspect couplings; insure smooth operation, clean with silicone spray if necessary. Check fluid levels in power unit: Motor Oil Hydraulic Oil Fuel Operate the power unit. Run engine and power at least one tool. Allow engine to run until normal operating temperature is reached. Change fuel (for optimum performance never use fuel that is more than 30 days old). Clean air filter Clean spark plug, set gap (replace if necessary)- as per engine manual. Annually Inspection Have complete system serviced by an authorized / certified technician Note: Appropriate Personal Protective Equipment should be worn while conducting the above maintenance. Contact an authorized TNT Service Technician if any problems are found at any time. An authorized TNT Certified Service Technician must perform annual service. TNT-OM # Rev: 05/23/12 15/38

16 Maintenance Record: DATE SERVICE PERFORMED BY UNIT SERIAL # TNT-OM # Rev: 05/23/12 16/38

17 Warranty: TNT-OM # Rev: 05/23/12 17/38

18 2490 West Oak Street Ashippun, Wisconsin Phone Warranty Registration Organization Street Address City State County Zip Phone Contact Title Phone Chief Phone Date Purchased / / Date Placed in Service / / Dealer Model Number Serial Number Power Unit(s) Spreader(s) Cutter(s) Ram(s) Please fax or mail this document to TNT Rescue Systems, Inc. and retain a copy for your records. FAX NUMBER (920) TNT-OM # Rev: 05/23/12 18/38

19 BT ,500 PSI SPEC SHEET: TNT-OM # Rev: 05/23/12 19/38

20 BT-1.5-LP 5,500 PSI SPEC SHEET: TNT-OM # Rev: 05/23/12 20/38

21 MSDS Sheet 10W-30 Motor Oil TNT-OM # Rev: 05/23/12 21/38

22 TNT-OM # Rev: 05/23/12 22/38

23 TNT-OM # Rev: 05/23/12 23/38

24 TNT-OM # Rev: 05/23/12 24/38

25 MSDS Sheet ISO 68 Hydraulic Oil TNT-OM # Rev: 05/23/12 25/38

26 TNT-OM # Rev: 05/23/12 26/38

27 TNT-OM # Rev: 05/23/12 27/38

28 TNT-OM # Rev: 05/23/12 28/38

29 MSDS Sheet Fire Resistant Hydraulic Oil TNT-OM # Rev: 05/23/12 29/38

30 TNT-OM # Rev: 05/23/12 30/38

31 TNT-OM # Rev: 05/23/12 31/38

32 TNT-OM # Rev: 05/23/12 32/38

33 TNT-OM # Rev: 05/23/12 33/38

34 TNT-OM # Rev: 05/23/12 34/38

35 TNT-OM # Rev: 05/23/12 35/38

36 TNT-OM # Rev: 05/23/12 36/38

37 NOTES TNT-OM # Rev: 05/23/12 37/38

38 TNT Rescue Systems, Inc West Oak Street Ashippun, WI or TNT-OM # Rev: 05/23/12 38/38

! WARNING! Read This Manual Before Operating Equipment

! WARNING! Read This Manual Before Operating Equipment ATT-6.5, ATT-6.5-RC, ATT-6.5-LP, ATT-6.5-LP-RC POWER UNIT Operations Manual ATT-6.5 ATT-6.5-RC ATT-6.5-LP ATT-6.5-LP-RC TNT Rescue Systems, Inc. 2490 West Oak Street Ashippun, WI 53003 920-474-4101 or

More information

POWER UNIT Operations Manual

POWER UNIT Operations Manual PTO-TWIN-ATT & PTO-TWIN-ATT-LP POWER UNIT Operations Manual PTO-TWIN-ATT PTO-TWIN-ATT-LP TNT Rescue Systems, Inc. 2490 West Oak Street Ashippun, WI 53003 920-474-4101 or 800-474-4189 E-Mail: email@tntrescue.com!

More information

L0S ANGELES COUNTY FIRE DEPARTMENT BASIC SKILLS TRAINING PROGRAM HYDRAULIC RESCUE SYSTEM

L0S ANGELES COUNTY FIRE DEPARTMENT BASIC SKILLS TRAINING PROGRAM HYDRAULIC RESCUE SYSTEM L0S ANGELES COUNTY FIRE DEPARTMENT 18 1. General Information The hydraulic rescue system currently used by the County of Los Angeles Fire Department is manufactured by Amkus Incorporated and includes 4

More information

Manual: GH2B-MCH Mini Simo Power Unit

Manual: GH2B-MCH Mini Simo Power Unit Understand manual before use. Operating AMKUS Rescue Systems without understanding the manual, receiving proper training, and using appropriate personal protective equipment is a misuse of AMKUS equipment.

More information

Single and Double Head Powered Screed. Screed King. User Manual. SCR-UM EN-04 (December 2018)

Single and Double Head Powered Screed. Screed King. User Manual. SCR-UM EN-04 (December 2018) Single and Double Head Powered Screed Screed King SCR-UM-00364-EN-04 () User Manual Single and Double Head Powered Screed, Screed King CONTENTS Scope of This Manual.............................................

More information

X-Tractor Series. Cutters INSTRUCTION MANUAL

X-Tractor Series. Cutters INSTRUCTION MANUAL INSTRUCTION MANUAL X-Tractor Series Cutters PRINTED IN USA 0305 PART NO. 159R141 Rev. 02 2005 Hale Products, Inc. Hale Products, Inc. reserves the right to make changes at any time, without notice or obligation,

More information

Owner s Manual Pressure Washer: Machine that cleans dirty surfaces with high pressure water.

Owner s Manual Pressure Washer: Machine that cleans dirty surfaces with high pressure water. M1577541A TM ITEM NUMBERS: 1577541, 1577542 Owner s Manual Pressure Washer: Machine that cleans dirty surfaces with high pressure water. WARNING Read this manual. Serious injury or death can result if

More information

Owner's Manual Instructions for Operation, Maintenance

Owner's Manual Instructions for Operation, Maintenance Owner's Manual Instructions for Operation, Maintenance Compact Stump and Root Grinder 2961090 (200-6H) Your Dosko grinder is intended for outdoor-use only and can be used to remove many tree stumps and

More information

DOUGLAS L. BARRY, Fire Chief / Bulletin No. 67 / Date of Issue: 03/1994 / Revised 06/2008 HOLMATRO RESCUE TOOL. Table of Contents

DOUGLAS L. BARRY, Fire Chief / Bulletin No. 67 / Date of Issue: 03/1994 / Revised 06/2008 HOLMATRO RESCUE TOOL. Table of Contents Los Angeles Fire Department TRAINING BULLETIN DOUGLAS L. BARRY, Fire Chief / Bulletin No. 67 / Date of Issue: 03/1994 / Revised 06/2008 HOLMATRO RESCUE TOOL Table of Contents I. Holmatro Rescue Tool II.

More information

DIRECT-DRIVE PRESSURE WASHERS

DIRECT-DRIVE PRESSURE WASHERS DIRECT-DRIVE PRESSURE WASHERS PJG SERIES PRESSURE WASHER MANUFACTURED BY: PJG-2001 PJG-2501-6.5 PJG-2501 PJG-3000 PJG-3001 PJG-3501 PJG-4001 OPERATOR s INTRODUCTION Thank you for purchasing a Mancorp Pressure

More information

IBT Series Square Drive Torque Wrenches

IBT Series Square Drive Torque Wrenches IBT Series Square Drive Torque Wrenches Operation and Maintenance Manual Model.75, 1, 3, 5, 8, 10, 20, 25, 35, 50 http://www.torsionx.com Use the IBT Series Square Drive Torque Wrenches Model.75, 1, 3,

More information

RedGum GP160 Splitter. Owner s Manual

RedGum GP160 Splitter. Owner s Manual RedGum GP160 Splitter Owner s Manual Product Description & Intended Purpose: This Log Splitter / Wood Splitter is an outdoor product that splits wood logs for use as fuel in a fireplace or a woodstove.

More information

Service Program 17 Point Service Free Loaners On-Site Minor Repairs For NO Downtime

Service Program 17 Point Service Free Loaners On-Site Minor Repairs For NO Downtime 17 Point Service Program 17 Point Service Free Loaners On-Site Minor Repairs For NO Downtime Fixed Annual Pricing Complete Record Keeping Service Reminders So You Are Never Behind Today s HOLMATRO Rescue

More information

Operation and Maintenance Manual http://www.torsionx.eu Use the MaxDrv Series Square Drive Torque Wrench Model.75, 1, 3, 5, 8, 10, 20, 25, 35, 50 to install and remove threaded fasteners requiring precise

More information

PORTABLE TRASH PUMPS MTP200 MTP300 MTP400

PORTABLE TRASH PUMPS MTP200 MTP300 MTP400 PORTABLE TRASH PUMPS MTP200 MTP300 MTP400 OPERATING & PARTS MANUAL INTRODUCTION This manual provides information and procedures to safely operate and maintain the engine and pump. For your own safety and

More information

GH2A-MC Series Mini Power Unit User Information Manual

GH2A-MC Series Mini Power Unit User Information Manual Understand manual before use. Operating AMKUS Rescue Systems without understanding the manual, receiving proper training, and using appropriate personal protective equipment is a misuse of AMKUS equipment.

More information

Owner s Manual Pressure Washer Pump: For high pressure cleaning machines.

Owner s Manual Pressure Washer Pump: For high pressure cleaning machines. MA578F.2 TM ITEM NUMBERS: A57370, A57398, A57754, A578, A5787, A5783, A5788, A5785, A57820 A578203, A57873 Owner s Manual Pressure Washer Pump: For high pressure cleaning machines. WARNING Read this manual.

More information

PORTABLE TRASH PUMPS MDP200

PORTABLE TRASH PUMPS MDP200 PORTABLE TRASH PUMPS MDP200 OPERATING & PARTS MANUAL INTRODUCTION This manual provides information and procedures to safely operate and maintain the engine and pump. For your own safety and protection

More information

DIRECT-DRIVE PRESSURE WASHERS

DIRECT-DRIVE PRESSURE WASHERS DIRECT-DRIVE PRESSURE WASHERS PJG SERIES PRESSURE WASHER MANUFACTURED BY: PJG-2002B PJG-2502-6.5B PJG-3002B PJG-4002B INTRODUCTION Thank you for purchasing a Mancorp Pressure Washer. This manual covers

More information

Operation and Maintenance Manual Model.75,, 3, 5, 8, 0, 0, 5, 35, 50 http://www.torsionx.com Use the MaxDrv Series Square Drive Torque Wrench Model.75,, 3, 5, 8, 0, 0, 5, 35, 50 to install and remove threaded

More information

Table of Contents. Safety symbols... 3 Assembly 6. Operation Maintenance Troubleshooting 11. Storage. 12. Notes. 13

Table of Contents. Safety symbols... 3 Assembly 6. Operation Maintenance Troubleshooting 11. Storage. 12. Notes. 13 Table of Contents Safety symbols... 3 Assembly 6 Operation... 8 Maintenance... 10 Troubleshooting 11 Storage. 12 Notes. 13 2 Safety Information Attention; this machine can be dangerous! All operators should

More information

Telescoping. Rams INSTRUCTION MANUAL

Telescoping. Rams INSTRUCTION MANUAL INSTRUCTION MANUAL Telescoping Rams PRINTED IN USA 0110 PART NO. 159R128 Rev. 05 2010 Hale Products, Inc. Hale Products, Inc. reserves the right to make changes at any time, without notice or obligation,

More information

OWNER'S MANUAL WARNING DANGER. Propane cylinders sold separately. The propane cylinder must be disconnected when this firebowl is not use.

OWNER'S MANUAL WARNING DANGER. Propane cylinders sold separately. The propane cylinder must be disconnected when this firebowl is not use. OWNER'S MANUAL READ BEFORE USE! Model No.: BH5003-3 Style No.: 66646 For Outdoor Use Only! Use Propane Gas Only! Propane cylinders sold separately. USE PROPANE GAS ONLY! -Do not store or use gasoline or

More information

North Dakota State University Grounds Maintenance Equipment

North Dakota State University Grounds Maintenance Equipment North Dakota State University Grounds Maintenance Equipment I. Introduction Grounds maintenance equipment is an important part of the work activities on NDSU campus. They can make grounds maintenance jobs

More information

Make/Type/Size/Model Honda Generator EB 3500X & EB5000X Operators Manual Open Well Ventilated Area to Start & Shut Down Machine

Make/Type/Size/Model Honda Generator EB 3500X & EB5000X Operators Manual Open Well Ventilated Area to Start & Shut Down Machine HONDA GENERATORS ARE DESIGNED TO GIVE SAFE AND DEPENDABLE SERVICE IF OPERATED ACCORDING TO INSTRUCTIONS. YOU CAN HELP PREVENT ACCIDENTS BY BEING FAMILIAR WITH YOUR GENERATORS CONTROLS AND BY OBSERVING

More information

DIAMOND CONCRETE SAW MODEL CC1800XL P R O D U C T S OPERATOR S MANUAL. February Part #

DIAMOND CONCRETE SAW MODEL CC1800XL P R O D U C T S OPERATOR S MANUAL. February Part # DIAMOND P R O D U C T S OPERATOR S MANUAL CONCRETE SAW MODEL CC1800XL February 2007 Part #1801038 Intentionally Blank GENERAL SAFETY WARNINGS AND PRECAUTIONS PERSONAL SAFETY Read and understand all operating

More information

INSTRUCTION MANUAL: Industrial Series Piston Air Compressor. Model Number: V Part Number: L001128KNA

INSTRUCTION MANUAL: Industrial Series Piston Air Compressor. Model Number: V Part Number: L001128KNA INSTRUCTION MANUAL: Industrial Series Piston Air Compressor Model Number: V8051-335 Part Number: L001128KNA Pump Model: LP335 K335 Motor: 5 HP / 1 PH Air Tank: 80 Gal Vertical 1830 W. 15 th St. Houston,

More information

20 TON AIR/MANUAL BOTTLE JACK

20 TON AIR/MANUAL BOTTLE JACK ESCO Equipment Supply Company 1 20 TON AIR/MANUAL BOTTLE JACK ESCO Part #10450 ESCO Equipment Supply Company 2 Instruction Manual Please read this instruction manual carefully before use. IMPORTANT PLEASE

More information

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS OPERATION MANUAL WARHORSE IMPORTANT SAFETY INSTRUCTIONS WARNING: Failure to observe these instructions can cause personal injury to machine operator or bystanders. WARNING: Asphyxiation Hazard. An improperly

More information

LOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List

LOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List LOG CHOP Hydraulic Wood Guillotine Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk

More information

Read instructions carefully and follow rules for safe operation. Failure to do so could result in serious injury. Fradan Manufacturing Corp.

Read instructions carefully and follow rules for safe operation. Failure to do so could result in serious injury. Fradan Manufacturing Corp. OPERATOR MANUAL FRADAN POWER BLOWERS Part No. 888-011-222-0 Read instructions carefully and follow rules for safe operation. Failure to do so could result in serious injury. Fradan Manufacturing Corp.

More information

610 BUSHEL MANURE SPREADER

610 BUSHEL MANURE SPREADER 610 BUSHEL MANURE SPREADER RODA MANUFACTURING 1008 LOCUST ST. HULL, IA. 51239 Art s-way Manufacturing 712-439-2366 Co., Inc. Hwy 9 West - PO Box 288 WWW.RODAMFG.COM Armstrong, IA. 50514 U.S.A 2 INTRODUCTION

More information

Maintenance and Repair

Maintenance and Repair Maintenance and Repair WARNING ALWAYS shut off the engine, remove key from ignition, make sure the engine is cool, and disconnect the spark plug and positive battery terminal from the battery before cleaning,

More information

OWNER S / OPERATOR S MANUAL

OWNER S / OPERATOR S MANUAL OWNER S / OPERATOR S MANUAL SAFETY PAGE 1 RECOGNIZE SAFETY INFORMATION This is the safety-alert symbol. When you see this symbol in this manual or on your EdgeMasterTM, be alert to the potential for personal

More information

Owner s Manual. Mortar / Plaster Mixer. Models M785 M1000 M1200

Owner s Manual. Mortar / Plaster Mixer. Models M785 M1000 M1200 Owner s Manual Mortar / Plaster Mixer Models M785 M1000 M1200 Tiger Equipment LLC. 15 Byrd Lane Rocky Mount, VA 24151 Tel: 540-489-7777 Fax: 540-489-7778 www.tigerequip.com 1. PREFACE This manual contains

More information

LP 9-20 E PAC. Crowder Supply Co., Inc Roslyn St., Commerce City, CO Toll Free:

LP 9-20 E PAC. Crowder Supply Co., Inc Roslyn St., Commerce City, CO Toll Free: LP 9-20 E PAC www.crowdersupply.com Toll Free: 888-883-5144 ATLAS COPCO CONSTRUCTION TOOLS AB 2006-10 NACKA SWEDEN No. 3392 5033 01 a www.atlascopco.com 1 English INTRODUCTION... 2 SAFETY INSTRUCTIONS...

More information

HOFFMANN POWER PRODUCTS PARTS LIST 2014

HOFFMANN POWER PRODUCTS PARTS LIST 2014 HOFFMANN POWER PRODUCTS PARTS LIST 2014 VIBRATORY PLATE COMPACTOR ALL PARTS ARE SUBJECT TO STANDARD HOFFMANN TERMS AND CONDITIONS OF SALE 2010 Replacement parts are not manufactured, sold or warranted

More information

Hydraulic Immediate Need Power Pack

Hydraulic Immediate Need Power Pack Safety, Operation, and Maintenance Manual WARNING Improper use of this tool can result in serious bodily injury This manual contains important information about product function and safety. Please read

More information

SPECIFICATIONS CONTENTS:

SPECIFICATIONS CONTENTS: Model 3052 1,100 Lbs 2 Stage Transmission Jack INSTRUCTION MANUAL CONTENTS: Page 1 Specifications Page 2 Warning Information Page 3 Assembly Page 4 Operating Instructions Page 4 Preventative Maintenance

More information

Propane torch. Model Assembly And Operation Instructions

Propane torch. Model Assembly And Operation Instructions Propane torch Model 39953 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA

More information

OPERATORS MANUAL FOR KAFURTER ROTARY TOPPERS MODELS: TP110, TP140, TP160, TP170

OPERATORS MANUAL FOR KAFURTER ROTARY TOPPERS MODELS: TP110, TP140, TP160, TP170 OPERATORS MANUAL FOR KAFURTER ROTARY TOPPERS MODELS: TP110, TP140, TP160, TP170 SAFETY WARNING: Do not use or operate this this manual and assembly instructions (where applicable) has been read and understood.

More information

Hydraulic PTO Flow Device

Hydraulic PTO Flow Device Safety, Operation, and Maintenance Manual WARNING Improper use of this tool can result in serious bodily injury This manual contains important information about product function and safety. Please read

More information

XP-AIR Multi-Port Power Pack Operation and Maintenance Manual

XP-AIR Multi-Port Power Pack Operation and Maintenance Manual XP-AIR Multi-Port Power Pack Operation and Maintenance Manual http://www.torsionx.com Safety Guide To use the XP-AIR Multi-Port Power Pack safely you must follow correct operation guidelines and inspect

More information

Walk-Behind Sprayer SL-80 & SL-80SS. Owner's Manual and Installation Instructions Original Instructions CAUTION

Walk-Behind Sprayer SL-80 & SL-80SS. Owner's Manual and Installation Instructions Original Instructions CAUTION April 15, 2017 Lit. No. 74419, Rev. 00 Walk-Behind Sprayer SL-80 & SL-80SS Owner's Manual and Installation Instructions Original Instructions CAUTION Read this document before operating or servicing the

More information

XP-115 Multi-Port Power Pack Operation and Maintenance Manual

XP-115 Multi-Port Power Pack Operation and Maintenance Manual XP-115 Multi-Port Power Pack Operation and Maintenance Manual http://www.torsionx.com Safety Guide To use the XP-115 Multi-Port Power Pack safely you must follow correct operation guidelines and inspect

More information

Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations

Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations M S E R I E Operator Manual S This operator manual has information for all models of series M plus some options and accessories. Some of the illustrations and information may not The most apply to your

More information

HexPro Series Low Profile Wrenches

HexPro Series Low Profile Wrenches HexPro Series Low Profile Wrenches Operation and Maintenance Manual Model 2HP 4HP 8HP 14HP 30HP www.torquetoolsinc.com Use the HEXPRO Series Low Profile Wrenches Model 2HP 4HP 8HP 14HP 30HP to install

More information

SBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions

SBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions SBCNNS Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model

More information

KLW4000D Multi-Port Power Pack

KLW4000D Multi-Port Power Pack KLW4000D Multi-Port Power Pack Operation and Maintenance Manual Safety Guide To use the KLW4000DMulti-Port Power Pack safely you must follow correct operation guidelines and inspect the equipment regularly.

More information

Firewood Processor Operator s Manual SSA400Z

Firewood Processor Operator s Manual SSA400Z Distribution Limited Firewood Processor Operator s Manual SSA400Z FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE Warranty Registration Form Model: Serial Number: Type

More information

OPERATION AND MAINTENANCE MANUAL

OPERATION AND MAINTENANCE MANUAL WREN IBT SERIES HYDRAULIC TORQUE WRENCHES IBT SQUARE DRIVE SERIES OPERATION AND MAINTENANCE MANUAL FOR WREN Products: POINT 75, 1IBT, 3IBT, 5IBT, 8IBT, 10IBT, 20IBT, 25IBT, 35IBT, 50IBT SQUARE DRIVE HYDRAULIC

More information

Wood Chipper Model C550M Operator's Manual

Wood Chipper Model C550M Operator's Manual Wood Chipper Model C550M Operator's Manual THIS MANUAL MUST BE READ AND UNDERSTOOD BEFORE ANYONE OPERATES THIS MACHINE! Manual# 990023 Revised 01/2010 YOU MUST FILL OUT YOUR WARRANTY REGISTRATION TO ACTIVATE

More information

Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and

Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and Operator Manual This operator manual has information for all models of series B plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important

More information

AIR-COOLED DIESEL GENERATOR OWNERʼS MANUAL. This manual contains important safety information. TDG2500E TDGW7000E TDG7000SE TDG4500E

AIR-COOLED DIESEL GENERATOR OWNERʼS MANUAL. This manual contains important safety information. TDG2500E TDGW7000E TDG7000SE TDG4500E AIR-COOLED DIESEL GENERATOR OWNERʼS MANUAL This manual contains important safety information. TDG2500E TDGW7000E TDG7000SE TDG4500E TDG8000-3 TDG7000SE-3 TDG7000E TDG8000E TDGW7000SE TDG7000E3 TDGW8000E

More information

Model Ton Hand Carry Axle Jack P/N: CJ67D0250-1

Model Ton Hand Carry Axle Jack P/N: CJ67D0250-1 Model 1504-50 15 Ton Hand Carry Axle Jack P/N: CJ67D0250-1 Operation and Maintenance Manual with Illustrated Parts List 2222 South Third Street Columbus, Ohio 43207-2402 Phone (614) 443-7492 FAX (614)

More information

YK1900i DIGITAL INVERTER GASOLINE GENERATOR OWNER S MANUAL PLEASE READ THIS MANUAL CAREFULLY. IT CONTAINS IMPORTANT SAFETY INFORMATION.

YK1900i DIGITAL INVERTER GASOLINE GENERATOR OWNER S MANUAL PLEASE READ THIS MANUAL CAREFULLY. IT CONTAINS IMPORTANT SAFETY INFORMATION. YK1900i DIGITAL INVERTER GASOLINE GENERATOR OWNER S MANUAL PLEASE READ THIS MANUAL CAREFULLY. IT CONTAINS IMPORTANT SAFETY INFORMATION. PREFACE Thank you for purchasing YANGKE generator. This manual covers

More information

RUFNEX Series Low Profile Wrenches Operation and Maintenance Manual

RUFNEX Series Low Profile Wrenches Operation and Maintenance Manual RUFNEX Series Low Profile Wrenches Operation and Maintenance Manual http://www.torsionx.com Use the RUFNEX Series Ultra-Low Profile Wrenches to install and remove large bolts that have minimal wrench clearance.

More information

ELECTRIC HYDRAULIC GEAR PUMP

ELECTRIC HYDRAULIC GEAR PUMP ELECTRIC HYDRAULIC GEAR PUMP 46169 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.

More information

CABLE CUTTER INSTRUCTION MANUAL

CABLE CUTTER INSTRUCTION MANUAL INSTRUCTION MANUAL For additional copies at no charge order 999 6443.0 750 CABLE CUTTER Read and understand all of the instructions and safety information in this manual before operating or servicing this

More information

SPECIFICATIONS CONTENTS:

SPECIFICATIONS CONTENTS: Model 3052A 1,100 Lbs Air Assist 2 Stage Transmission Jack INSTRUCTION MANUAL CONTENTS: Page 1 Specifications Page 2 Warning Information Page 3 Assembly Page 4 Operating Instructions Page 4 Preventative

More information

LAWN MOWER OWNER S MANUAL

LAWN MOWER OWNER S MANUAL LAWN MOWER OWNER S MANUAL Woodies SKU: 1153279 & 1153280 CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Thank you for choosing our Gasoline Lawnmower. 1 To ensure

More information

Air / Hydraulic Pump Instructions. CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine.

Air / Hydraulic Pump Instructions. CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. Air / Hydraulic Pump Instructions CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. 1-800-467-2464 10 Cooperative Way Wright City, MO 63390 P.O.

More information

CONTENTS: 5740AH - 40 Ton Air/Hydraulic Shop Press 5750AH - 50 Ton Air/Hydraulic Shop Press OWNER'S MANUAL

CONTENTS: 5740AH - 40 Ton Air/Hydraulic Shop Press 5750AH - 50 Ton Air/Hydraulic Shop Press OWNER'S MANUAL OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Safety Information and Warranty Information 3 Parts List 4-6 Assembly Instructions 7 Pump and Ram Assembly Instructions 8 Procedure for Bleeding Air 9 Pump

More information

SPECIFICATIONS SKIDRIL SKIDRIL P.O. BOX 8041 GREENSBORO, NC TEL: OPERATION & PARTS MANUAL ENGINE BREAKER G23

SPECIFICATIONS SKIDRIL SKIDRIL P.O. BOX 8041 GREENSBORO, NC TEL: OPERATION & PARTS MANUAL ENGINE BREAKER G23 SPECIFICATIONS MODEL G23 DIMENSIONS 32 X18 X13 WEIGHT 50 LB. ENGINE TYPE SINGLE CYLINDER, AIR COOLED, 2 CYCLE DISPLACEMENT 40.2 CC OUTPUT 1.4PS/6000 RPM CARBURATION DIAPHRAGM, W/PRIMER AND CHOKE AIR CLEANER

More information

Installation, Operation & Maintenance Manual for Flo-Max II Coupler Model FM126

Installation, Operation & Maintenance Manual for Flo-Max II Coupler Model FM126 IMPORTANT: The Flo-Max II coupler is designed to disconnect the nurse tank hose from a tool bar before the straight pull force on the hose exceeds 450 pounds. Upon disconnect, swing checks in both halves

More information

Installation, Operation & Maintenance Manual for Flo-Max II Coupler Model FM126

Installation, Operation & Maintenance Manual for Flo-Max II Coupler Model FM126 Installation, Operation & Maintenance Manual for Flo-Max II Coupler Model FM126 December 2015 Form FVC 073 - Rev 09 IMPORTANT: KEEP THIS DOCUMENT WITH THE PRODUCT UNTIL IT REACHES THE END USER. 1. Contact

More information

STRUT SPRING COMPRESSOR

STRUT SPRING COMPRESSOR OWNER S MANUAL PRODUCT CODE: 1221T STRUT SPRING COMPRESSOR Capacity Stroke Spring Coil Spring Spring Coil Net Weight (Maximum) Thickness Length Diameter 1,000kg 330mm 10-18mm 210-570mm 100-158mm 36kg Made

More information

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS OPERATION MANUAL COMMANDER IMPORTANT SAFETY INSTRUCTIONS WARNING: Failure to observe these instructions can cause personal injury to machine operator or bystanders. WARNING: Asphyxiation Hazard. An improperly

More information

HYDRAULIC BODY REPAIR KIT

HYDRAULIC BODY REPAIR KIT HYDRAULIC BODY REPAIR KIT Distributed by Kincrome Group www.kincrome.com.au Owner s Assembly and Operating Manual SPECIFICATIONS... 2 IMPORTANT SAFETY INFORMATION... 3 UNPACKING HYDRAULIC BODY REPAIR KIT...

More information

Low Profile Wrenches Operation and Maintenance Manual

Low Profile Wrenches Operation and Maintenance Manual Low Profile Wrenches Operation and Maintenance Manual http://www.torquetoolsinc.com Use the HEXPRO Series Low Profile Wrenches Model 2HP 4HP 8HP 14HP 30HP to install and remove large bolts that have minimal

More information

#9040 FUEL TANK SWEEPER

#9040 FUEL TANK SWEEPER #9040 FUEL TANK SWEEPER INSTRUCTION MANUAL FILTERS AND REMOVES FINE BIO-CONTAMINANTS, ALGAE, ETC. SWEEPING PROCESS REMOVES LARGE CONTAMINANTS FROM OIL TANKS SUCH AS RUST, WATER, CRUDE AND DIRT CIRCULATES

More information

INSTALLATION MANUAL SWS

INSTALLATION MANUAL SWS INSTALLATION MANUAL SWS 30-30 Gallon Auxiliary Tank FOR RVB1500, 2000, 2500 SPREADERS Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, MegaBlade, V-Wing,

More information

CROMMELINS COMPACTORS

CROMMELINS COMPACTORS CROMMELINS COMPACTORS OPERATION & INSTRUCTION MANUAL Thank you for your selection of a CROMMELINS Compactor. This Operation Manual explains its use, installation, checking and maintenance. We highly recommend

More information

MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL

MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL DO NOT THROW AWAY IMPORTANT MANUAL MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL Operators Manual GROUND HOG, INC. P.O.BOX 290 San Bernardino, CA. 92402 Phone (909) 478-5700 Fax (909) 478-5710 E-mail:

More information

1100W PORTABLE GENERATOR

1100W PORTABLE GENERATOR 1100W PORTABLE GENERATOR MODEL NO: G1200 PART NO: 8010110 OPERATION & MAINTENANCE INSTRUCTIONS LS0312 INTRODUCTION Thank you for purchasing this CLARKE 1100W Portable Generator. Before attempting to use

More information

Mini Pump Installation, Operation & Maintenance Manual. For Models: BA-MS-633

Mini Pump Installation, Operation & Maintenance Manual. For Models: BA-MS-633 Mini Pump Installation, Operation & Maintenance Manual For Models: BA-MS-633 BL-309 6/08/2012 General Information & Precautions This publication provides detailed instructions for installing the single

More information

2-1/4 Gallon Sprayer

2-1/4 Gallon Sprayer 2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights

More information

Instruction Manual. Maximum Operating Pressure 510 bar

Instruction Manual. Maximum Operating Pressure 510 bar Single Speed Diesel Power Unit Model HPD11 Maximum Operating Pressure 510 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au Phone: +61 7 3865

More information

PW Operator Manual PW This operator manual. has information for all. models of series PW plus some options. and accessories.

PW Operator Manual PW This operator manual. has information for all. models of series PW plus some options. and accessories. Operator Manual PW 3000 S E R I E S This operator manual has information for all models of series PW 3000 plus some options and accessories. Some The most of the illustrations and important component information

More information

Installation and Operation Manual

Installation and Operation Manual 1645 Lemonwood Dr. Santa Paula, CA 93060 USA Toll Free: 1 (800) 253-2363 Tel: 1 (805) 933-9970 rangerproducts.com Ranger Floor Jack Installation and Operation Manual Manual Revision B July 2017 Manual

More information

Page 1 of 19. Part# /10/2006

Page 1 of 19. Part# /10/2006 Part# 1002733-01 10/10/2006 This manual contains important information concerning the installation and operation of the gun washers listed above. Read manual thoroughly and keep for future reference INSTRUCTIONS

More information

Effective June 2016 New Issue

Effective June 2016 New Issue Voltage Regulators MN225035EN Effective June 2016 New Issue COOPER POWER SERIES QD8 Quik-Drive Tap-Changer Switch Assembly Kit 5740785B13 and Switch Neutral Stationary Assembly Kit 5791646A48 Installation

More information

INSTRUCTION MANUAL GASOLINE BRUSH CUTTER TR L. 42.7cc. 1.3 kw. 450 mm. Note : Read and carefully before using this machine

INSTRUCTION MANUAL GASOLINE BRUSH CUTTER TR L. 42.7cc. 1.3 kw. 450 mm. Note : Read and carefully before using this machine INSTRUCTION MANUAL GASOLINE BRUSH CUTTER TR15142 Note : Read and carefully before using this machine 42.7cc 1.3 kw 450 mm 18" 0.70 L MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION This symbol accompanied

More information

EBG Series Surface Preparation Machines

EBG Series Surface Preparation Machines Owner s Manual EBG Series Surface Preparation Machines EBG-20/Q EBG-20/C EBG-20/E EBG-28 EBG-20/R EBG-28/R EBG-28 EBG-20/C / 800.557.6822 Square Scrub EBG Series Surface Preparation Machines Owner s Manual

More information

BEFCO. Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE. AA4-120 (fits models Hop 209 & 212) DEFLECTOR

BEFCO. Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE. AA4-120 (fits models Hop 209 & 212) DEFLECTOR BEFCO Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE AA-0 (fits models Hop 09 & ) DEFLECTOR AA-0 (fits models Baby Hop 0 & 06) 009-95 (fits models Hop 0 & 06) 009-968

More information

Decals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. WARNING! Xxxx xxx xxxx xx xxxx x xxxx.

Decals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. WARNING! Xxxx xxx xxxx xx xxxx x xxxx. symbols and decals Xxxx xxx xxxx xx xxxx x xxxx. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader

More information

HEAVY DUTY TROLLEY JACK. Operation Manual

HEAVY DUTY TROLLEY JACK. Operation Manual HEAVY DUTY TROLLEY JACK 4T Operation Manual Make sure to read and fully understand the instruction manual before using this product and keep the manual properly 1 General Description Product Description

More information

Champion Chippers OPERATOR S MANUAL. Operation & Safety. Includes Model: CX850 CX851. Part #

Champion Chippers OPERATOR S MANUAL. Operation & Safety. Includes Model: CX850 CX851. Part # OPERATOR S MANUAL Champion Chippers Operation & Safety Includes Model: CX850 CX851 Part # 990026 YOU MUST FILL OUT YOUR WARRANTY REGISTRATION TO ACTIVATE YOUR WARRANTY AND TO QUALIFY FOR PARTS SERVICE!!

More information

LP DEL PAC. ATLAS COPCO CONSTRUCTION TOOLS AB NACKA SWEDEN No

LP DEL PAC. ATLAS COPCO CONSTRUCTION TOOLS AB NACKA SWEDEN No LP 13-20 DEL PAC ATLAS COPCO CONSTRUCTION TOOLS AB 2007-03 NACKA SWEDEN No. 3392 5146 01 www.atlascopco.com 1 English!"!" INTRODUCTION... 2 SAFETY INSTRUCTIONS... 2 Introduction to safety... 2 Safety symbols

More information

OPERATING MANUAL C-1350 CABLE PUSHER. Copyright 2003 by CBS Products (KT), Ltd

OPERATING MANUAL C-1350 CABLE PUSHER. Copyright 2003 by CBS Products (KT), Ltd CBS Products (KT), Ltd, Pillings Road, Oakham, Rutland, LE15 6QF. UK Telephone: +44(0)1572723665 Fax: +44(0)1572 756006 E-Mail: sales@cbsproducts.com Website:www.cbsproducts.com OPERATING MANUAL C-1350

More information

OWNER S MANUAL PRODUCT CODE: 2006T

OWNER S MANUAL PRODUCT CODE: 2006T Jul-18 Product Code: 2006T OWNER S MANUAL PRODUCT CODE: 2006T HYDRAULIC PIPE BENDER 12,000KG Model Capacity Bending Die No of Attachments 12,000kg 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" 6 Made in China to

More information

50 Gordon Drive, Rockland, Maine sherplows.com. Walk-Behind Sprayer SS-120

50 Gordon Drive, Rockland, Maine sherplows.com. Walk-Behind Sprayer SS-120 Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com November 1, 2017 Lit. No. 76652, Rev. 01 Walk-Behind Sprayer SS-120 Owner's Manual and Installation Instructions Original

More information

HYDRAULIC POWER PACK

HYDRAULIC POWER PACK HYDRAULIC POWER PACK OPERATION & MAINTENANCE MANUAL Model 34484 Copyright 2012 by All rights reserved. No part of this publication may be copied, reproduced or transmitted in any form whatsoever without

More information

Operating Instructions & Parts Manual

Operating Instructions & Parts Manual Hydraulic Air/Manual Bottle Jacks Operating Instructions & Parts Manual Model Number ATD-74 ATD-74 Capacity Ton 0 Ton! U.S. Patent No.'s. 5,34,73-5,946,9 This is the safety alert symbol. It is used to

More information

Trench Filler for Compact Utility Loaders

Trench Filler for Compact Utility Loaders Form No. 3353-608 Rev A Trench Filler for Compact Utility Loaders Model No. 22472 260000001 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN) Contents Page Introduction................................

More information

T1-Titanium Non-HVLP Spray Gun

T1-Titanium Non-HVLP Spray Gun T1-Titanium Non-HVLP Spray Gun THE SPRAY GUN PEOPLE FOR PRODUCT INFORMATION CALL: 1-800-742-7731 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

More information

INSTRUCTION SHEET FOR LOCK NUT CYLINDERS

INSTRUCTION SHEET FOR LOCK NUT CYLINDERS Form No. E01104 Rev. A Date: 06.10.2009 INSTRUCTION SHEET FOR LOCK NUT CYLINDERS Repair Parts Sheets for hydraulic hand pumps are available from your nearest authorized EAGLE PRO Service Center or EAGLE

More information

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN REPAIR J Line Driver Model 233725 U.S. Patent Number 6,883,633 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 10 mph (16 kph) Maximum Operating

More information

POWER PACK W/OIL COOLER P/N 32800

POWER PACK W/OIL COOLER P/N 32800 POWER PACK W/OIL COOLER P/N 32800 OPERATION AND MAINTENANCE MANUAL Copyright 2017 by All rights reserved. No part of this publication may be copied, reproduced or transmitted in any form whatsoever without

More information