OPERATING INSTRUCTIONS Thread unscrewing unit Z 5410, Z5420, Z5430

Size: px
Start display at page:

Download "OPERATING INSTRUCTIONS Thread unscrewing unit Z 5410, Z5420, Z5430"

Transcription

1 STRACK NORMA GmbH & Co. KG Postfach Lüdenscheid Königsberger Str Lüdenscheid Tel.: / Fax: / info@strack.de D 8138E OPERATING INSTRUCTIONS Thread unscrewing unit Z 5410, Z5420, Z5430

2 Index of contents page Preamble 3 1. Application according to regulation Structure and application of the operating instructions 4 2. Purpose of application Survey over the connections Technical dates Application according to regulation Definition Authorised person Application not according to regulation Guarantee information 8 3. Essential safety instructions The used safety symbols The safety devices Essential types of risk Duty to take care of the operator Demands on the staff Transport Dimensions and weight Tranist support Installation Requirements of the environment Assembly Initial operation Supply and removal connections Preparation for the first start Execution of the first start Example of assembly Controls after the first start Operation Allowed operator stations The switching-on of the thread unscrewing unit Machine maintenance Things you have to consider Visual inspections Cleaning Maintenance Removal from service Preliminary removal from service Final removal from service Removal Additional information Service addresses Assembly dimensions, dimensions, drawings of the thread core 24 2

3 Preamble Thank you for the confidence in the product of STRACK NORMA GmbH & Co. KG. We are pleased about your decision to buy a product of STRACK. To facilitate the handling with the product we established these operating instructions. The operating instructions are an important element of the thread unscrewing units Z Z 5430 and provide the secure and efficient operating. They are intended for all persons which are operating the thread unscrewing units and which are responsible for the secure operating. For reasons of the operating safety a copy of these operating instructions has to be left at the thread unscrewing unit to guarantee the direct access of the operating personnel. The security advices in the operating instructions have particularly to be respected to recognize and to avoid possible dangers. Please read the operating instructions carefully and completely before mounting and initial operation of the thread unscrewing units. A regular maintenance is necessary to guarantee a secure and economic application. If the instructions and advices of these operating instructions are not observed, any liability on our part for resulting damages and performance losses will be excluded. 3

4 1. Application according to regulation Survey In this chapter you will find the following subchapters: Structure and application of the operating instructions Indications concerning the manufacturer and contact person 1.1 Structure and application of the operating instructions These operating instructions are valid for the following installation: Denomination: Thread unscrewing unit Type: Z 5410, Z 5420, Z 5430 Date of issue: November Purpose of application The thread unscrewing unit is used for the unscrewing of internal threads out of injection moulded parts. It is attached to an existing injection mould and builds a separate unit. By means of a core pulling control of the injection moulding machine it is electrically operated and is driven hydraulically. The traverse path is actuated by limit switches. The thread unscrewing unit distinguishes itself particularly through the simple mounting and operating. Gear plate Picture 1: Front view of a single-unscrewing unit Z 5410 Base plate 4

5 2.1 Survey over the connections Hydraulic connections Overflow oil line connections Limit switch Gear wheel Adjusting collar (switch cams) Limit switch Fixing holes at the base plate Picture 2: Top view of a double-unscrewing unit Z 5420 To guarantee the function of the thread unscrewing unit all connections have correctly to be attached by a qualified person which has been trained correspondingly. The overflow oil line connection serves to remove excessive oil from the motor, absolutely attach this connection and guide the included hose back in the oil-holding tank of the injection moulding machine. Thereby the wastage of the hydraulic motor can considerably be reduced. 5

6 2.2 Technical dates Hydraulic motor: OMM 8 OMM 32 OMP 25 Geometrical displacement 8,2 cm³ 31,6 cm³ 25,0 cm³ Maximal rotation speed 1950 min min min-1 Maximal turning moment Int. 1) 15 Nm Int. 1) 57 Nm Int. 1) 47 Nm Peak 2) 21 Nm Peak 2) 64 Nm Peak 2) 67 Nm Maximal performance 2,6 kw 3,2 kw 6,1 kw Maximal drop of pressure 100 bar 100 bar 100 bar Maximal oil flow 20 l/min 25 l/min 45 l/min Maximal starting pressure 4 bar 4 bar 10 bar at unloaded shaft Minimal starting torque 10 Nm 48 Nm 40 Nm at maximal drop of pressure 1) Intermittent operation: the allowed values may all in all appear for the duration of maximal 10 % per minute. 2) Peak load : the allowed values may all in all appear for the duration of maximal 1 % per minute. Installation sizes and standard distances between axless at double-thread-unscrewing units: Type Minimal Maximal Hydraulic motor Type Distanz between axles at thread thread double unscrewing units 1/2 3 mm 12 mm OMM 8 / OMM 32 double 30-50mm 3/4 3 mm 18 mm OMM 8 / OMM 32 double 80 mm 5/6 3 mm 18 mm OMM 8 / OMM 32 double 20 mm 7/8 3 mm 18 mm OMM 8 / OMM 32 double 160 mm Pitch: Minimal thread pitch Maximal thread pitch Installation size 0,3 mm 3,5 mm 25 / 2 0,3 mm 3,5 mm 25 / 2 0,3 mm 3,5 mm 25 / 2 0,3 mm 3,5 mm 25 / 2 0,3 mm 3,5 mm 25 / 2 6

7 2.3 Application according to regulation Definition "Authorised person" A person can be considered as an authorised person, if it is charged with certain works at or with the thread unscrewing unit according to instructions. The thread-unscrewing unit and the operating instructions are exclusively be destined for the industrial use. The thread unscrewing unit may not be used or put in operation by private users. In the following each person is considered as operator, which installs, puts in operation, actuates, maintains or disassembles the thread unscrewing unit. Each operator of the thread unscrewing unit has to read the present operating instructions before the installation, the maintenance, the initial operation, the operation or the disassembling carefully and completely. It has to be secured that the operator has understood the present operating instructions completely and that he always acts according to the instructions and recommendations of these operating instructions. Therefore the operator of the thread-unscrewing units should read the present operating instructions in regular intervals repeatedly. The operating company is responsible for training of the operators of the thread unscrewing units. Each operator needs basic knowledge of control engineering, electrical engineering, mechanics and hydraulics. The operating company has to secure that the operator has read the present operating instructions completely and has understood the content, that he can realise the contents of these operating instructions practically and that the contents of these operating instructions are completely be considered. The operating instructions have to be handed to third persons, if the unscrewing unit is handed to third persons (Sale, rental ). A transfer of the thread unscrewing unit without operating instructions is not allowed. Application according to regulation The thread unscrewing unit is only applied according to regulation, if the following points are considered: The thread unscrewing unit is used for the unscrewing of internal threads out of injection moulded parts. The thread unscrewing unit is attached to a present injection mould in an injection moulding machine and builds a separate unit. The thread unscrewing unit is electrically controlled and operated hydraulically. The traverse path is controlled over the limit switches. In the extended condition additionally to the limit switch also the mechanical stop is used. The leakage oil hose is connected correctly and excessive oil is reverted unpressurised in the oil holding tank of the injection moulding machine. The thread unscrewing unit may only be operated with the installed safety installations. The safety- and operating advices of these operating instructions have to be observed. The operating instructions of the operator have to be observed. The legal accident prevention regulations have to be observed. The safety- and operating advices of the injection moulding machine have to be observed. 7

8 2.4 Application not according to regulation As application not according to regulation in the sense of a predictable faulty operation is considered: Any modifications of the operating procedure or the process, which were not approved by the responsible employee, the operating with modified, removed or bypassed safety installations and the operating of the installation by personnel which is not instructed or unauthorised. 2.5 Guarantee information 12 months from date of invoice we concede for the Thread unscrewing units Types: Z 5410/Z 5420/Z 5430 guarantee for all defects, which are based on material- and fabrication mistakes. Seal parts and wearing parts are excluded from the guarantee. Damages which are caused by improper handling, for example overloading, use of force, modifications, own attempted repairs are excluded from the guarantee. Nonobservance of the operating instructions, utilisation of not mentioned materials, insufficient cleaning and maintenance, as well as improper handling lead to a loss of warranty claim. The opening of the machine may only be effected in the way the operating instructions are giving instruction for that. A further opening or disassembling of the machine is prohibited. If you really have operating problems, please call us or describe your problems by fax. We are pleased to help you. 8

9 3. Essential safety instructions Survey In this chapter you will find the following subchapters The used safety symbols The safety devices Essential types of risk Duty to take care of the operator Requirements to the personnel First of all The following essential safety advices have to be understood as supplementation to the already valid national accident prevention regulations and laws. That means that besides these essential safety advices at any rate also the existing accident prevention regulations and laws have to be observed. 3.1 The used safety symbols Danger! This symbol points out that there are essential dangers for the health of persons. The word DANGER OF LIFE points separately to possible fatal dangers. Danger! This symbol points out that there are electrical dangers for the health of persons because of electrical voltages. The word DANGER OF LIFE points separately to possible fatal dangers. Attention! This symbol points out that damages for the thread unscrewing unit, the material or the environment can occur. 9

10 3.2 Safety devices The thread unscrewing unit is equipped with the following safety devices, which by no means may be removed or manipulated: Limit switches (inductive proximity switch) Adjusting collars Please always pay attention to a faultless function of the security devices! The thread unscrewing unit may not be operated with defective security devices! Covering protection: The thread unscrewing unit has to be installed in such a way that it is impossible to enter the unit with body parts or to touch it during the operation. If the thread unscrewing unit is not secured by the cover of the injection moulding machine, a separate protective casing has to be fitted. 3.3 Essential types of risk Content Here you will find information concerning the essential safety advices for the secure handling with the thread unscrewing unit. Risk of injury The thread unscrewing unit is actuated with hydraulic oil, which is transported with high pressure. Extruding oil can cause injuries of the skin, eyes and mucous membranes. Hot hydraulic oil can cause burns. Inform the maintenance staff immediately about damaged cables and components. Maintenance- and repair works may only be effected by trained maintenance staff. Keep all access doors and safety devices locked. Connect the hydraulic motor of the thread unscrewing unit only with the hydraulic couplings and hoses which are provided for that and which are type-approved. Please pay attention that the maximum pressure indicated on the hydraulic hoses and the maximum shelf life is not exceeded. A very high flow velocity of hydraulic oil in hydraulic hoses can cause static electricity and can lead to elec tric shocks. The thread unscrewing unit and all other parts must therefore be connected earthed, this must particularly be considered in explosive areas. 10

11 Electric shock! The electrical connection may only be effected by electricity specialist or a specially trained operator. Connect the limit switches only to the core puller control of the injection moulding machine which is provided for that purpose. The limit switches may only be operated with 24 V continuous current. Operate in each case only one thread unscrewing unit at one core puller control, no further devices. Consider the connecting diagram of the core puller control. ATTENTION! Modifications at the thread unscrewing unit are not allowed, otherwise the guarantee expires and possibly the thread unscrewing unit does not function. If the thread unscrewing unit should be modified from the delivered execution, or, in case of need, should be repaired, please only use the original replacements, conversion parts and accessories. Or use components which are produced according to drawings which were approved by STRACK NORMA. At utilisation of foreign accessories and replacement parts each liability and guarantee by STRACK NORMA is excluded. In principle it has to be considered that the thread length and the deactivation of the thread un screwing unit is exclusively realised by the delivered limit switches. The thread unscrewing unit may not be operated without the delivered limit switches. For the connection of the limit switches consider the electric connecting diagrams of the respective core puller controls at the injection moulding machine, in which the thread unscrewing unit should be used. 11

12 3.4 Duty to take care of the operator The thread unscrewing unit was constructed and produced in consideration of a risk analysis and according to a careful selection of the harmonized engineer standards, which have to be kept as well as in consideration of further technical specifications. Therewith it corresponds to the state of technology and guarantees the maximum possible safety. In the operating practice this security can only be reached, if all necessary measures are taken. It is subjected to the duty to take care of the operator to plan these measures and to control their fulfilment. In particular the operator has to secure, that: The thread unscrewing unit is only used according to regulations The system is only operated in faultless, fully functional condition and that in particular the safety devices are controlled regularly concerning their functional efficiency. Necessary personal protective equipments for the operating-, maintenance- and repair staff are available and are used. In each case the operating instructions are available at the site of operation of the system in a readable and complete condition. Only sufficiently qualified and authorised staff operates, maintains and repairs the system. This staff is regularly trained in all appropriate questions concerning operational safety and envi ronment protection, and that the staff knows the operating instructions and particularly the safety instructions, which are included. These operating instructions are preserved at the machine. It must be assured that all persons, who are operating the machine, can review the operating instructions at any time. Additionally to the operating instructions also directives in the sense of the Labour Protection. Law and the Work Equipment Ordinance have to be provided. All securityand operating information signs have to be kept in a very good readable condition. Damaged signs or signs which have become unreadable have to be exchanged immediately. 3.5 Demands on the staff Each operator of the thread unscrewing unit has to read the present operating instructions before the installation, the maintenance, the initial operation, the operating or the disassembly. It has to be secured that the operator has completely understood the present operating instructions and conducts itself always according to the instructions and recommendations of these operating instructions. Therefore the operator of the tread unscrewing unit should repeatedly read the present operating instructions carefully in regular intervals. The operating company is responsible for the training of the operator of the thread unscrewing unit. Each operator needs basic experiences in control engineering, electrical engineering, mechanics and hydraulics. 12

13 4. Transport Survey In this chapter you will find the following subchapters: Dimensions and weight Transit support 4.1 Dimension and weight Height/width/length in mm Weight: see data sheet in the appendix see data sheet in the appendix 4.2 Transit support The connectors have to be closed against leakage during the carriage 5. Installation Survey In this chapter you will fin the following subchapters: Requirements of the environment Assembly 5.1 Requirements of the environment 2 13

14 5.2 Assembly The thread unscrewing unit has to be connected firmly with the injection mould; it may not loosen or shift. The thread unscrewing unit may only be attached, where no things can fall down on the thread unscrewing unit. If this is not possible, the thread unscrewing unit has to be protected by a protective covering. Thread core support Fixing screw Thread core Guiding threaded nut Thread core support Both parts are screwed together According to the customer s specifications the pitch of the thread which has to be demoulded, is already in advance manufactured in the threaded nut and the core support at delivery. The toolmaker fabricates only the forming thread core. The pitch of the guiding thread and the thread core must always correspond. 14

15 6. Initial operation Survey In this chapter you will find the following subchapters: Supply and removal connections Preparations for the first start Execution of the first start Controls after the first start 6.1 Supply and removal connections Hydraulic connection The thread unscrewing unit is operated with hydraulic oil from bar. A hydraulic hose, at minimum of the type series 8S from the hydraulic aggregate of the injection moulding machine to the thread unscrewing unit has to be passed. The utilisation of the overflow oil line connection prolongs the service life of the shaft sealing of the Sauer-Danfoss hydraulic motors by a multiple. For this, establish a connection with the delivered oil leakage pipe (plastic hose Ø 6 mm) from the hydraulic motor to the hydraulic holding tank of the injection moulding machine, on which the thread unscrewing unit should be used. Absolutely secure that the leak oil can flow unpressurised in the hydraulic holding tank of the injection moulding machine. Also consider the further operating instructions for the Sauer-Danfoss Hydraulic Motors, particularly the indications concerning the maximal operating pressures. Electrical connection The threat unscrewing unit may not be operated without the included limit switches. Only these limit switches secure an exact positioning of the respective end positions. For the connection of the limit switches please consider the electric connecting diagrams concerning the core puller control of the injection moulding machine, at which the thread unscrewing unit should be used. Secure that the core puller control operates the hydraulic motor of the thread unscrewing unit in the end positions unpressurised. Don t operate further devices with the core puller control which is provided for the thread unscrewing units. If besides the thread unscrewing unit also further devices should be operated, then absolutely use an injection moulding machine with a multicore puller control. 15

16 6.2 Preparations for the first start The thread unscrewing unit has to be mounted firmly on the injection mould, it may not loosen or shift. All connections have to be joined correctly. 6.3 Execution of the first start Carry out test run to control the adjusted values. Example of a mould with thread unscrewing unit and core puller cylinde 16

17 6.4 Example of assembly Thread unscrewing unit complete Thread core Insertion of the thread core in the thread core support backwards till the stop Fix the thread core by means of 2 screws Screw the thread core support in the guiding threaded nut Hold both, thread core support and guiding threaded nut, ready 17

18 Attach the base plate with the two thread core supports and the guiding threaded nuts at the mould by means of fixing screws and tighten them firmly. Plug the gear plate on the thread core supports and fix it with the cylinder head screws. Rotate the gear wheels till the stop is reached. Not before both thread core supports were screwed on the stop, attach and fix the motor. Adjust the desired parameters in the core puller control of the injection moulding machine. Connect the hydraulic tube to the valve of the core puller control. Connect the limit switch with the electronics of the core puller control. 18

19 Upper limit switch Bottom limit switch Set the adjusting collars at the adjusting collar tube (bottom end position) Adjust the adjusting collars at the adjusting collar tube (upper end position) Execute test run of the correct positioning Start production During the setting it is important to extend with less pressure (to the stop) and to retract with more pressure (unscrewed). This can optionally be adjusted in the core puller control of the injection moulding machine, for example use for the extension 40 bar and for the retraction 80 bar. This guarantees that the thread core supports can loosen again from the stop. If they are once stuck at the stop, in the gear wheel borings exist, which can be used as point of application by means of a face spanner for the loosening without being forced to dismount the thread-unscrewing unit. 6.5 Controls after the first start After the first start control the correct function of the thread-unscrewing unit in connection with the injection moulding machine. Control the made settings. 19

20 7. Operation Survey In this chapter you will find the following subchapters Allowed operator stations The switching-on of the thread unscrewing unit 7.1 Allowed operator stations The operating of the thread unscrewing unit may only be effected from the same operator stations as the injection moulding machine. IMPORTANT ANNOTATION! All other stations are not necessary for the operation of the thread unscrewing device and are therefore not allowed. 7.2 The switching-on of the thread unscrewing unit The switching-on of the thread unscrewing unit may exclusively be effected by means of the core puller control. 20

21 8. Maintenance Survey In this chapter you will find the following subchapters Things you have to consider Visual inspection Cleaning Maintenance Repairs 8.1 Things you have to consider The basics: Only effect maintenance- and cleaning works, when the thread unscrewing unit is switched off Inform the maintenance staff immediately about any defect, any leakage or any damage. All maintenance- and repair works may only be effected by specially trained staff. After the first 2 operating hours all screwed fastenings of the whole thread unscrewing unit have to be controlled and if necessary have to be retightened. Thereafter all 100 operating hours. Spray the guiding threaded nut and the thread core support all 100 operating hours with thin fluid oil (WD-40 or equivalent). Please consider the further operating instructions and limits for the Sauer-Danfoss Hydraulic Motors. In particular the indications about the maximal operating pressures. 8.2 Visual inspections Content: Here you learn which visual inspections are necessary to guarantee the functional capability of the thread unscrewing unit. Regular visual inspections: Please effect the following visual inspections: Leak tightness monthly Defect cables and lines monthly Control oil leakage pipe monthly Before each working shift the thread unscrewing unit has to be examined concerning conspicuous defects. If defects are found, these have to be corrected before start of work. 21

22 8.3 Cleaning Content: Here you learn which regular cleanings are necessary to guarantee the functional capability of the thread unscrewing unit. Strong fouling can cause disruption in operation. Therefore clean on demand, but not later than 100 operating hours the following parts of the system: Guiding thread nut Thread core support Adjusting collar tube Adjusting collar 8.4 Maintenance Content: Here you learn which regular maintenance works are necessary to guarantee the functional capability of the thread unscrewing unit. Dismountings, maintenance works and repairs may only be effected by trained staff. For dismounting, maintenance or repair all connections of the thread unscrewing unit to the energy sources have to be cut. In particular the connections to the hydraulic aggregate and to the current source have to be cut. Protective clothing has to be worn. Always discharge the hydraulic pressure before maintenance- and repair works. Death or serious injuries may occur because of hydraulic oil which escapes with high pressure out of the hydraulic motor of the thread unscrewing unit. Before dismounting clean the thread unscrewing unit efficiently. Dangerous ingredients, which are a peril for health or the environment, have to be completely removed from the hydraulic motor of the thread unscrewing unit. After the first 2 operating hours all screwed fastenings of the whole thread unscrewing unit have to be controlled and if necessary be retightened. Thereafter all 100 operating hours. Spray the guiding threaded nut and the thread core support all 100 operating hours with thin fluid oil (WD-40 or equivalent). Consider the further operating instructions and limits for the Sauer-Danfoss Hydraulic Motors. In particular the indications about the maximal operating pressures. 22

23 9. Removal from service Survey In this chapter you will find the following subchapters: Preliminary removal from service Final removal from service Removal 9.1 Preliminary removal from service Content: Here you learn which measures are necessary to remove the thread unscrewing unit finally from service. The final removal from service may only be effected by specially trained operators. Bring the thread unscrewing unit in its upper end position (unscrewed) Deactivate the thread unscrewing unit in the core puller control. Cut the thread unscrewing unit from the energy sources and lines. Dismount the thread unscrewing unit from the injection mould. 9.2 Final removal from service Content: Here you learn which measures are necessary to remove the thread unscrewing unit finally from service. The final removal from service may only be effected by specially trained operators. Bring the thread unscrewing unit in its upper end position (unscrewed) Deactivate the thread unscrewing unit in the core puller control. Cut the thread unscrewing unit from the energy sources and lines. Dismount the thread unscrewing unit from the injection mould. 23

24 9.3 Removal Content: Here you get information concerning the removal of the thread unscrewing unit. Remove all parts of the thread unscrewing unit in such a manner that health problems and environment damages are excluded. You get special advices for the removal: From the documentation and the data sheets of the suppliers From your environmental protection officer 10. Additinal information Survey In this chapter you will find the following subchapters: Service addresses Assembly dimensions, dimensions, drawings of the thread cores 10.1 Service addresses Content: Here you get information concerning the service addresses of the thread unscrewing unit. Service exclusively by: STRACK NORMA GmbH & Co. KG 10.2 Assembly dimensions, dimensions, drawings of the thread In the following appendix you will find assembly dimensions and dimensional drawings of the thread unscrewing units. Additionally you will find dimensional drawings of the thread cores, which are fixed in the thread unscrewing unit. 24

25 25

26 26

27 27

28 28

29 29

30 30

31 31

32 32

33 33

34 34

35 35

36 36

Installation manual wall-mounted distributor

Installation manual wall-mounted distributor EN Installation manual wall-mounted distributor EN 60003233 Issue 11.2016 2016-14-11 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3 Signal words used 4 2

More information

Installation manual portable distributors

Installation manual portable distributors EN Installation manual portable distributors EN 60003206 Issue 11.2016 15/11/2016 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3 Signal words used 4 2 Intended

More information

Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM

Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM 150 150 150 This instruction manual contains proprietary information which is protected by copyright laws. No part of

More information

User Guide. Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC)

User Guide. Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC) User Guide Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC) version 04/2013 Content General Information 3 Warning 3 Scope of Supply 3 Overview 3 General safety details 4 Intended use 4

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Evolution & Racing for the SUZUKI GSX-R 1000 *503501* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please

More information

Assembly and Maintenance Manual Type AS

Assembly and Maintenance Manual Type AS Assembly and Maintenance Manual Type AS Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_AS.docx

More information

Assembly and Maintenance Manual Type ASNU

Assembly and Maintenance Manual Type ASNU Assembly and Maintenance Manual Type ASNU Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_ASNU.docx

More information

Quick-Disconnect Coupling one-hand operation Push Pull ND 5, connecting thread G 1/4,max. operating pressure 500 bar

Quick-Disconnect Coupling one-hand operation Push Pull ND 5, connecting thread G 1/4,max. operating pressure 500 bar Issue 12-2013 Quick-Disconnect Coupling one-hand operation Push Pull ND 5, connecting thread G 1/4,max. operating pressure 500 bar Figure 1: Coupling complete Figure 4: Coded coupling, complete Table of

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Rear Carbon Fiber Diffuser for the Porsche 911 Turbo (type 991) Porsche 911 Turbo S (type 991) www.akrapovic.com Installation instructions Akrapovič

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Evolution Link Pipe Set for the BMW M3 (type F80) BMW M4 (type F82) Installation instructions Akrapovič Exhaust System: Evolution Link Pipe Set for

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Optional Header for the BMW R ninet * 504335* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read

More information

Translation of the Original operating instructions Lifting device Z 70 /...

Translation of the Original operating instructions Lifting device Z 70 /... Translation of the Original operating instructions Lifting device Z 70 /... Content 1. Lifting device / Correct use according to regulations 2. Basic principles 3. General information 4. Special remarks

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the BMW R1200GS *503648* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the entire

More information

Installation instructions

Installation instructions Installation instructions Akrapovič System: Evolution and Optional Front Link Pipe Set for the Porsche Cayenne Turbo (type 958) Porsche Cayenne Turbo S (type 958) www.akrapovic.com Installation instructions

More information

Operating instructions Spray nozzle SDU

Operating instructions Spray nozzle SDU Operating instructions Spray nozzle SDU INDEX Page 1. General... 2 2. Safety... 2 4 A. Nozzles type... 5 B. Nozzles inserts... 5 C. Revision... 5 D. Monitoring... 6 E. Heating... 6 F. Accessories... 6

More information

HST -LS Interlocking device (Translation of Original Manual)

HST -LS Interlocking device (Translation of Original Manual) Installation and Operating Manual for Components HST -LS Interlocking device (Translation of Original Manual) HST-LS Ident.-No.: 10268 HST-LS Ident.-No.: 10269 HST-LS, pictured Ident-Nr. 10269 The image

More information

Swing Piston Compressors and Vacuum Pumps

Swing Piston Compressors and Vacuum Pumps Swing Piston Compressors and Vacuum Pumps NPK 018 AC Pressure NPK 018 DC Pressure NPK 018 AC Vacuum NPK 018 DC Vacuum Operating and Installation Instructions Read and observe these Operating and Installation

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems: Down-Pipe and Link-Pipe for the VW GOLF GTI (type Mk VI.) VW GOLF 1.8TSI (type Mk VI.) www.akrapovic.com Installation instructions Akrapovič Exhaust

More information

Mounting and Operating Instructions EB 8053 EN. Series 250 Type and Type Pneumatic Control Valves

Mounting and Operating Instructions EB 8053 EN. Series 250 Type and Type Pneumatic Control Valves Series 250 Type 3252 1 and Type 3252 7 Pneumatic Control Valves Type 3252 High-pressure valve with Type 3277 Pneumatic Actuator and Type 3767 Electropneumatic Positioner Mounting and Operating Instructions

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems: Tail Pipes, Evolution and Optional Down Pipe for the MINI COOPER S (type R56) MINI COOPER S Cabrio (type R57) MINI COOPER S Coupe (type R58) MINI JCW

More information

AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the Kawasaki Ninja ZX-6R Kawasaki 636 Ninja ZX-6R

AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the Kawasaki Ninja ZX-6R Kawasaki 636 Ninja ZX-6R Installation instructions: *502180* AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the Kawasaki Ninja ZX-6R Kawasaki 636 Ninja ZX-6R Congratulations on purchasing an Akrapovic exhaust system. Please read these installation

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Porsche Cayenne Turbo (type 958 FL) ENGLISH Version 1.1 11/2015 www.akrapovic.com Installation instructions Akrapovič Exhaust System:

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Kawasaki Z800 *503616* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Operating instructions Actuator and Emergency exit AZ/AZM 200-B30 AZ/AZM 201-B About this document. Content

Operating instructions Actuator and Emergency exit AZ/AZM 200-B30 AZ/AZM 201-B About this document. Content 1. About this document Operating instructions............pages 1 to 10 Original 1.1 Function This operating instructions manual provides all the information you need for the mounting, set-up and commissioning

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Racing for the Honda SH125 Honda SH150 Honda PS125 Honda PS150 *503042* Congratulations on purchasing an Akrapovič exhaust system. Please read the entire

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the BMW R1200GS 2010 *502470* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Porsche Cayenne Turbo (type 958) Porsche Cayenne Turbo S (type 958) Porsche Cayenne S (type 958) Porsche Cayenne Diesel (type 958) Porsche

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Racing for the Honda Forza 125 *504523* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On Low for the BMW R ninet *503951* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Installation instructions. Akrapovič Exhaust System: Evolution for the VW GOLF GTI (type MK VII.)

Installation instructions. Akrapovič Exhaust System: Evolution for the VW GOLF GTI (type MK VII.) Installation instructions Akrapovič Exhaust System: Evolution for the VW GOLF GTI (type MK VII.) Congratulations on purchasing an Akrapovič exhaust system. Please read the entire installation manual prior

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems: Slip-On for the AUDI TT-S 2008-2010 www.akrapovic.com Installation instructions Akrapovič Exhaust Systems: Slip-On for the AUDI TT-S 2008-2010 www.akrapovic.com

More information

General Operating Manual

General Operating Manual This Operating Manual is valid for the following hydraulic components of MOTRAC-Hydraulik GmbH: IMA V-Manifold-Blocks Blocks IMA V-Mounting-Units Units Valves and Housings IMA V-Sandwich plates IMA V-Mounting-plates

More information

Safety Shock Absorbers SCS33 to SCS64

Safety Shock Absorbers SCS33 to SCS64 Safety Shock Absorbers SCS33 to SCS64 1 Operating Instruction SCS33-25EU SCS33-50EU SCS45-25EU SCS45-50EU SCS45-75EU Rod Button SCS64-50EU SCS64-100EU SCS64-150EU Integrated Rod Seals Main Bearing Content

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Racing for the Honda PCX 125 Honda PCX 150 *504859* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please

More information

English. Instruction and operation manual S 212. Dew point sensor

English. Instruction and operation manual S 212. Dew point sensor English Instruction and operation manual S 212 Dew point sensor Dear Customer, thank you for choosing our product. The operating instructions must be read in full and carefully observed before starting

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Sports Cup for the Porsche 911 GT3 (type 991) www.akrapovic.com Installation instructions Akrapovič Exhaust System: Sports Cup for the Porsche 911 GT3

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Ducati Multistrada 1200 Ducati Multistrada 1200S *504797* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Aprilia RSV4 *504732* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Instructions for Use Plain Trolley ULK Geared Trolley UHK

Instructions for Use Plain Trolley ULK Geared Trolley UHK Instructions for Use Plain Trolley Geared Trolley Item no. Load-carrying capacity (payload) Weight Trolley widths *special trolley widths* Device dimensions mm H / W / D Minimum curve radius mm -005 0,5

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Rear Carbon Fiber Diffuser for the Porsche 911 GT3 (type 991) Installation instructions Akrapovič Exhaust System: Rear Carbon Fiber Diffuser for the

More information

Assembly and maintenance manual Type FSO, FSO-GR, FS, HPI

Assembly and maintenance manual Type FSO, FSO-GR, FS, HPI Type FSO, FSO-GR, FS, HPI Hatschekstr.36 69126 Heidelberg Deutschland Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 23.08.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\M1124E_0_FSO_FSO-GR_FS_HPI.docx

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Evolution Header for the Ducati Monster 1200 Ducati Monster 1200S Ducati Monster 821 Ducati Monster 821 Dark *504286* Congratulations on purchasing an

More information

Angle seat valve with piston actuator VZXA-...-K

Angle seat valve with piston actuator VZXA-...-K Angle seat valve with piston actuator VZXA-...-K Festo AG & Co. KG Postfach 73726 Esslingen Germany +49 711 347-0 www.festo.com 3 Further information Accessories www.festo.com/catalogue Spare parts www.festo.com/spareparts

More information

Printed: Doc-Nr: PUB / / 000 / 00

Printed: Doc-Nr: PUB / / 000 / 00 ORIGINAL OPERATING INSTRUCTIONS Hilti HTE-P 33 dispenser It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Ducati 899 Panigale Ducati 1199 Panigale *504110* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust

More information

OTTO HYDRAULICS GmbH & Co KG SYSTEME UND KOMPONENTEN FÜR ÖLHYDRAULISCHE ANTRIEBE UND STEUERUNGEN SIEMENSSTRASSE 12/ FRIEDRICHSHAFEN

OTTO HYDRAULICS GmbH & Co KG SYSTEME UND KOMPONENTEN FÜR ÖLHYDRAULISCHE ANTRIEBE UND STEUERUNGEN SIEMENSSTRASSE 12/ FRIEDRICHSHAFEN Hydraulik-aggregates Otto-Hydraulics Operating manual Author: Reinhard Otto Date: 16.01.2016 Operating manual rev.1 page: 1/11 Table of Contents Page 1...General information of this operating manual 3

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems Slip-On for the YAMAHA YZF-R1 *504448* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the YAMAHA X-MAX 125/125 ABS/250/250 ABS, YAMAHA X-CITY 125/250, MBK SKYCRUISER 125/125ABS, MBK CITYLINER 125 *502840* www.akrapovic.com

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the HONDA VFR800F *504163* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the ABARTH 500 ABARTH 500C www.akrapovic.com Installation instructions Akrapovič Exhaust System: Slip-On for the ABARTH 500 ABARTH 500C

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Laborghini Gallardo 550-2 Coupe Laborghini Gallardo 560-4 Coupe / Spyder Laborghini Gallardo 570-4 Coupe / Spyder Congratulations on

More information

Assembly and Maintenance Manual Type RSBW

Assembly and Maintenance Manual Type RSBW Assembly and Maintenance Manual Type RSBW Hatschekstr. 36 69126 Heidelberg Germany Tel +49(0)6221 30470 Tel +49(0)6221 304731 info@stieber.de www.stieber.de Stieber Clutch Date of issue: 16/03/2017 GB

More information

Operating Instructions. Parallel shaft cam gear

Operating Instructions. Parallel shaft cam gear Operating Instructions Parallel shaft cam gear Type : Serial No. : C O N T E N T S 1. General 1.1 Validity 1.2 Safety instructions 1.3 Shipment 1.4 Transport Regulations 1.5 Weights of gear types 2. Instructions

More information

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Ducati Scrambler *504778* Congratulations on purchasing an Akrapovič exhaust system. Please read the entire installation manual prior

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the HONDA CBF600 2008-2010 *502715* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Racing for the YAMAHA YZF-R25 YAMAHA YZF-R3 *504503* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the SUZUKI DL650 VStorm *503566* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Optional Header for the Kawasaki Z1000 Kawasaki Z1000SX *504006* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Link Pipe Set for the Lamborghini Aventador LP700-4 Lamborghini Aventador LP700-4 Roadster www.akrapovic.com Installation instructions Akrapovič Exhaust

More information

RADEX -N Composite Operating/Assembly instructions

RADEX -N Composite Operating/Assembly instructions 1 of 14 RADEX -N is a torsionally stiff flexible steel lamina coupling. It is able to compensate for shaft misalignment, for example caused by thermal expansion, etc. note ISO 101. Drawn: 0.05.15 Kb/Wig

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the BMW K1600GT/K1600GTL *502967* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read

More information

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions 1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems: Racing and Evolution for the YAMAHA YZ250F FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. *503670* www.akrapovic.com www.akrapovic.com

More information

Pressure relief valve

Pressure relief valve Pressure relief valve Operating manual Series DHV 712 Version BA-2015.10.20 EN Print-No. 300 510 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems: Racing and Evolution for the HONDA CRF250R *503981* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please

More information

Technical Information. A U R O R A Konrad G. Schulz GmbH & Co. KG Tel.: /

Technical Information. A U R O R A Konrad G. Schulz GmbH & Co. KG Tel.: / 1/8 Heater Mini Content: 1 Safety advises 2 Device description 3 Function description 4 Operation 5 Installation 6 Technical data 7 Maintenance 8 Spare parts 9 Optional accessories 10 Fault diagnosis A

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the Kawasaki ZX-10R *504877* EN Version 1.0 10/2015 www.akrapovic.com www.akrapovic.com Congratulations on purchasing the Akrapovič exhaust

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the Piaggio MP3 LT 400 i.e. Piaggio MP3 RST 400 i.e. Piaggio MP3 500 Piaggio MP3 500LT Piaggio Xevo 400 i.e. Piaggio Beverly Cruiser 500 i.e.

More information

Installation instructions:

Installation instructions: Installation instructions: *350106* AKRAPOVIC SLIP-ON, SLIP-ON STREET LEGAL & SLIP-ON SP SERIES EXHAUST SYSTEM for the YAMAHA YZF R1 (2004-2006) Congratulations on purchasing an Akrapovic exhaust system.

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Optional Valve Set for the Harley-Davidson Sportster *504169* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust

More information

Operating and Maintenance Manual. for. HADEF overhead crane. as jointed crane TA

Operating and Maintenance Manual. for. HADEF overhead crane. as jointed crane TA 5.52.714.00.1.0 Edition 03.2004 GB Operating and Maintenance Manual for HADEF overhead crane as jointed crane TA Subject to changes. 1 HADEF Table of Contents 1 General Page 3 2 Product description Page

More information

Installation instructions. Carbon Fiber Diffuser for the VW GOLF GTI (type MK VII.)

Installation instructions. Carbon Fiber Diffuser for the VW GOLF GTI (type MK VII.) Installation instructions Carbon Fiber Diffuser for the VW GOLF GTI (type MK VII.) Congratulations on purchasing an Akrapovič exhaust system. Please read the entire installation manual prior to undertaking

More information

AKRAPOVIC SLIP-ON & SLIP-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 1000 (2005, 2006)

AKRAPOVIC SLIP-ON & SLIP-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 1000 (2005, 2006) Installation instructions: *350154* AKRAPOVIC SLIP-ON & SLIP-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 1000 (2005, 2006) Congratulations on purchasing an Akrapovic exhaust system. Please read

More information

Operating instructions Solenoid interlock AZM 161../.. 1. About this document. Content

Operating instructions Solenoid interlock AZM 161../.. 1. About this document. Content Solenoid interlock AZM 11../.. 1. About this document Operating instructions.............pages 1 to ranslation of the original operating instructions 1.1 Function his operating instructions manual provides

More information

English. Instruction and operation manual S 110. Power Meter

English. Instruction and operation manual S 110. Power Meter English Instruction and operation manual S 110 Power Meter Dear Customer, thank you for choosing our product. The operating instructions must be read in full and carefully observed before starting up the

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On for the Triumph Speed Triple 1050 *503390* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please

More information

Service - Safety Manual

Service - Safety Manual Service - Safety Manual Mounting and maintenance instructions Linear Units LT50 series Code Unit Serial number Date by Linear Units LT50 series Table of contents 1 Safety 3 1.1 Significance of the manual

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Optional Link Pipe for the YAMAHA YZF-R1 *504783* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please

More information

AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the SUZUKI GSR 600 ( )

AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the SUZUKI GSR 600 ( ) Installation instructions: *501996* AKRAPOVIC SLIP-ON EXHAUST SYSTEM for the SUZUKI GSR 600 (2006-2009) Congratulations on purchasing an Akrapovic exhaust system. Please read these installation instructions

More information

CENTAFLEX-K Assembly and operating instructions 014K S... M EN Rev. 1

CENTAFLEX-K Assembly and operating instructions 014K S... M EN Rev. 1 Assembly and operating instructions Contents 1 General remarks... 5 2 Safety... 6 2.1 Qualification of deployed personnel... 6 2.2 Warning notes... 6 2.2.1 Signal words... 6 2.2.2 Symbols... 7 2.3 Application

More information

AKRAPOVIC BOLT-ON & BOLT-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 600 (2004), GSX-R 750 (2004), GSX-R 1000 (2003, 2004)

AKRAPOVIC BOLT-ON & BOLT-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 600 (2004), GSX-R 750 (2004), GSX-R 1000 (2003, 2004) Installation instructions: *350089* AKRAPOVIC BOLT-ON & BOLT-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 600 (2004), GSX-R 750 (2004), GSX-R 1000 (2003, 2004) Congratulations on purchasing an Akrapovic

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On for the Yamaha XJR 1300 *503789* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust system. Please read the

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Evolution for the Renault Megane RS Coupe III. 2.0 www.akrapovic.com Installation instructions Akrapovič Exhaust System: Evolution for the Renault Megane

More information

GL Ludemann Y-Strainers

GL Ludemann Y-Strainers GL Ludemann Y-Strainers Installation, Operation and Maintenance Manual English Issue 1-03/2014 - Page 1/7 GENERAL These instructions are for installing, operation and maintenance of Y-strainers fabricated

More information

FLENDER ZAPEX couplings. Type ZWT. Operating instructions BA 3505 EN 10/2011. FLENDER couplings

FLENDER ZAPEX couplings. Type ZWT. Operating instructions BA 3505 EN 10/2011. FLENDER couplings FLENDER ZAPEX couplings Type ZWT Operating instructions FLENDER couplings FLENDER ZAPEX couplings Type ZWT Operating instructions Translation of the original operating instructions Technical data Notes

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems Racing and Evolution for the Kawasaki KX450F FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. *504872* EN Version 1.1 10/2015 www.akrapovic.com

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Open for the Harley-Davidson models: V-Rod Muscle V-Rod Night Rod *503494* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems: Slip-On for the HONDA CRF450R FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. *503657* www.akrapovic.com www.akrapovic.com Congratulations

More information

AKRAPOVIC RACING & EVOLUTION EXHAUST SYSTEM for the Kawasaki Ninja ZX-6R Kawasaki 636 Ninja ZX-6R

AKRAPOVIC RACING & EVOLUTION EXHAUST SYSTEM for the Kawasaki Ninja ZX-6R Kawasaki 636 Ninja ZX-6R Installation instructions: *502181* AKRAPOVIC RACING & EVOLUTION EXHAUST SYSTEM for the Kawasaki Ninja ZX-6R Kawasaki 636 Ninja ZX-6R Congratulations on purchasing an Akrapovic exhaust system. Please read

More information

Installation instructions

Installation instructions Installation instructions Akrapovič: Heat Shield for the Ducati Monster 1200 Ducati Monster 1200S Ducati Monster 821 Ducati Monster 821 Dark *504287* Congratulations on purchasing an Akrapovič exhaust

More information

AKRAPOVIC SINGLE RACING&EVOLUTION EXHAUST SYSTEM for the HONDA CRF250R ( )

AKRAPOVIC SINGLE RACING&EVOLUTION EXHAUST SYSTEM for the HONDA CRF250R ( ) Installation instructions: *350240* AKRAPOVIC SINGLE RACING&EVOLUTION EXHAUST SYSTEM for the HONDA CRF250R (2006 2009) Congratulations on purchasing an Akrapovic exhaust system. Please read these installation

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Slip-On Classic Line for the Harley-Davidson Sportster *503783* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič exhaust

More information

Tension Meter. Edition FT 03.E. FT Series. Instruction Manual. Valid as of: Please keep the manual for future reference!

Tension Meter. Edition FT 03.E. FT Series. Instruction Manual. Valid as of: Please keep the manual for future reference! Tension Meter FT Series S C H M I D T c o n t r o l i n s t r u m e n t s Edition FT 03.E Model FT Instruction Manual Valid as of: 01.09.2011 Please keep the manual for future reference! Contents 1 Warranty

More information

Operating instructions Solenoid interlock TKM/TKF. 1. About this document. Content

Operating instructions Solenoid interlock TKM/TKF. 1. About this document. Content 1. About this document Operating instructions.............pages 1 to 6 Original 1.1 Function This operating instructions manual provides all the information you need for the mounting, set-up and commissioning

More information

Bowl feeder WV401-1 / Translation of operating and installation instructions

Bowl feeder WV401-1 / Translation of operating and installation instructions Bowl feeder WV401-1 / 402-1 Translation of operating and installation instructions Copyright by Afag GmbH This operation instruction applies to: Bowl feeder WV401-1 Bowl feeder WV402-1 Type 230 V / 50

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System: Optional Valve Set for the Harley-Davidson models: DYNA (parallel mounted mufflers models) *503324* Congratulations on purchasing an Akrapovič exhaust

More information

Application cup for OptiFlex 2 GM03 manual powder gun

Application cup for OptiFlex 2 GM03 manual powder gun En Operating instructions and spare parts list Application cup for OptiFlex 2 GM03 manual powder gun Translation of the original operating instructions Documentation OptiFlex GM03 application cup Copyright

More information

CM3-E Operation Manual DOK-347E / Rev.:1.01 KH / October 1999 Portable 3 turbine check meter

CM3-E Operation Manual DOK-347E / Rev.:1.01 KH / October 1999 Portable 3 turbine check meter -E DOK-347E / Rev.:1.01 KH / October 1999 Portable 3 turbine check meter Contents 1 General Remarks... 1-1 1.1 About This Manual... 1-1 1.2 How to Use This Manual... 1-1 2 Approval... 2-1 2.1 Explosion

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust System Slip-On and Slip-On High Mounted for the Honda VFR 1200F 2010 *502653* www.akrapovic.com www.akrapovic.com Congratulations on purchasing an Akrapovič

More information