V Washing Kit

Transcription

1 V Washing Kit

2 Catalogue Structure... 3 Installation And Application... 4 Usage of the accessories... 5 Steps for car washing... 5 How to wash your car better... 6 Maintenance... 7 General failure and solution... 7 Safety cautions:... 8 Pay attention:

3 Structure 3

4 Installation And Application 1. Connect the pressure hose with the outlet, screw it and at the same time, connect the other end with the spray gun or foam gun. 2. Fill water into the tank, connect the power cord with the cigarette lighter socket. 3. Start your car or make it on the situation of power-on. When the cigarette lighter light is on, shut the door and turn on the power. Smear the cleaning product soap or foam on the car and adjust the straight line flow or mist flow by rotating the nozzle. When all is done, you can start to wash your car now. 4. After finishing washing your car, draw off the water, shut off the spray gun and turn off the power to OFF. Pull the plug from the cigarette lighter socket, dry it and pull off the power line. 4

5 5. Loose the pressure pipe apart from the host machine by rotating the buttery nut in anti-clockwise direction. Drawn the water in the pipe, roll it up and put it in the tank for your next use. Usage of the accessories 1. Foam gun-- Add enough cleaning solution into the bottle and screw the cap tightly. Connect the foam gun with the ON-OFF. Open the switch to clean your car in Fan-shaped water. 2. Spray Gun-- There are three levels can be chosen. ( Mist, line & Shower). Adjust it by rotating the spray nozzle. Steps for car washing Step 1. Spray the cleaning solution with the foam gun Step 2. Use the brush to blow the sand and dust. Use the spray gun as well in order to strengthen the cleaning effect. Step 3. Let your car dry naturally or use the cloth to dry it faster. 5

6 How to wash your car better Cleaning the car according to the directions of the arrows: from centre to both sides, then from top to bottom. Directions from top to bottom. 6

7 Maintenance 1.You need to drain off the water remained in the sprayer gun,pressure tubes and machine after finishing washing the car every time. 2.If there is sands on the surface of pressure tubes and power line,you must wipe them with Soft cloth,then placed them neatly. 3.Please place accessories neatly in turn after finishing every usage 4.When the sprayer gun can not spray or pressure become low,maybe the strainer is blocked by mess. It is time to clean the strainer in water tank. The methods as follow: Open the water tank,and find the suction pipe,and pull out it and strainer. General failure and solution General failure and solution Fault Cause Solution The sprayer gun can not spray or the pressure become low The car washer machine can not operate 1.the strainer is blocked 2.the connection of sprayer gun and pump is leaking 3.the high pressure is pinched 1.The power supply without power or cigarette lighter Poorly contact between socket 2.Car battery power shortage 3.The cigarette lighter light is not bright or the fuse the cigarette lighter is blowed 4.The residual water in the machine to freeze due to the low temperature clean the strainer reconnect as clockwise rotation Place the pressure sprayer gun turn on the power or reconnect the cigarette lighter start up the car replace the fuse please Use the machine in 5-45 environment 7

8 Safety cautions: 1. When cleaning your cars, please read the instruction carefully first. 2. When using cigarette lighter, please rotate the switch to the ON position and you do not need to start the engine. 3. Please pay attention to the situation that the air conditioning in the car has been off to prevent battery loss, resulting unable to start the engine. 4. When washing the car, please make the door closed so as to avoid water entering inside. As the door edge is made by rubber, it will not crush the power cord. 5. There should no gap so the joints must fit closely with the bucket; if there is lacune, it will leak causing safety directly. 6. When washing the car, the water should be soaked the tank, and not let the bucket stay in the anhydrous state in a long time. 7. The cleaning agent should be enough to spray foam and to clean better. Pay attention: 1. When cleaning your cars, please read the instruction carefully first. After packing, please do not wash your car immediately. You d better wash after minutes, otherwise, the paint will suddenly affected by the cold, causing cracking. 2. After washing, please do not use the dry towel cleaning the car, you d better use the wrung wet wipes or cotton cloth. 3. Washing car should not be too frequent, usually 3 or 4 times monthly is appropriate. 4. Please do not use washing powder, soap to wash the car because of its high PH value. It s easy to damage the paint. 5. Prohibiting spraying at people and animals, or flushing the engine, so as to avoid damage. 6. As to prevent the water freeze in the machine in winter, please re-spray after spraying water for some time, until the water is drained. 7. Do not damage the power cord and puncture the filter. 8