Hand Operated Hydraulic Pumps PHP121DAH65 PHP121DA95. Engineering & Manufacturing Solutions

Size: px
Start display at page:

Download "Hand Operated Hydraulic Pumps PHP121DAH65 PHP121DA95. Engineering & Manufacturing Solutions"

Transcription

1 Engineering & Manufacturing Solutions HP Specifications: Volume Displacement HP22SA 0.20 in3 (3.3 cm3) (When handle is pulled). HP61DA 0.60 in3 (9.8 cm3) per full cycle. HP121DA 1.20 in3 (19.7 cm3) per full cycle. Tank sizes 95 in3 (1557 cm3), 80 in3 (1311 cm3), 65 in3 (1065 cm3), and 50 in3. (819 cm3). TL 2 in. (50.8 mm) tank used with remote reservoir. Pressure rating and (Standard relief setting). HP22SA 6000 psi, 414 bar (4000 psi, 276 bar). HP61DA 3000 psi (3000 psi, 207 bar). HP121DA 2000 psi (2000 psi, 138 bar). Outlet Port Size #6 SAE (9/16-18). Filler Port Size 1/4 NPT. PHP121DAH65 Hand Operated Hydraulic Pumps PHP121DA95 ISO 9001:2008 WITH DESIGN Certificate #

2 Schematics & Features HPHand Operated Hydraulic Pumps HP121 OR HP61 PHP121DA95 T P PHP121DAH65 MATERIALS: Cast Iron Body Buna N O Rings Delrin Inlet Seat Stainless Steel Piston FEATURES: O RING PORT to eliminate leakage. DELRIN SEAT to seal between tank inlet and piston reservoir. O RING OUTLET CHECK for zero leakage. O RING SEAL between tank and casting. STEEL BALL RELEASE VALVE relieves outlet pressure. EVERY HP IS TESTED for outlet check leakage, double or single pump action and relief setting. OPTIONAL HORIZONTAL MOUNTING BRACKETS allows for horizontal handle actuation. H-2 HP REV(D)

3 HP GENERAL INFORMATION The Brand, hand operated hydraulic pump comes in three basic models HP121DA, HP61DA and HP22SA. Each one of these models comes with a relief that can be adjusted manually to suit the customer s requirements. Brand has also redesigned the outlet check seat for zero leakage. The zero leak seat was created by utilizing an o ring seal to replace the steel ball seal. The NT (no tank) option does not have a tank, pressure relief and release valve. To use the NT option the customer must connect the inlet of the hand pump to an external reservoir (external reservoir is not supplied by Brand). The TL (2 in. tank) option has a small tank, pressure relief and release valve. To use the TL option the customer must connect the fill port on the tank to an external reservoir (external reservoir is not supplied by Brand). When mounting the NT or TL option, the pump should be placed below the fluid level of the external reservoir. General Information HP22SA has a single-acting piston that can pump 0.20 in3 (3.3 cm3) per full cycle. The term single-acting means that the piston only pumps fluid when the handle is pulled away from the pump. The piston does not displace fluid when the handle is pushed towards the pump. The pressure rating is higher then the HP121DA because it takes less force to displace the smaller surface area of the piston. This pump is typically used in applications that require low volume displacement and high pressure. HP61DA has a double-acting piston that can pump 0.60 in3 (9.8 cm3) per full cycle. The term double-acting means that the piston pumps fluid when the handle is pushed and pulled. The pressure rating is higher then the HP121DA because it takes less force to displace the piston. This pump is typically used in applications that require medium volume displacement and medium pressure. HP121DA has a large double-acting piston that can pump 1.20 in3 (19.7 cm3) per full cycle. The term double-acting means that the piston pumps fluid when the handle is pushed and pulled. The pressure rating is lower then the HP22SA and HP61DA because it takes a greater amount of force to displace a piston that has a large surface area. This pump is typically used in applications that require high volume displacement and lower pressure. H-3

4 Model Codes / Options & Accessories HPHand Operated Hydraulic Pumps HP CREATING A COMMON MODEL CODE FOR HP S: HP PAINT: Blank No paint P Painted black (other colors available, consult factory) MP Epoxy coding DISPLACEMENT PER CYCLE & PUMP ACTION: 22SA 0.20 in3 (3.3 cm3) and single acting 61DA 0.60 in3 (9.8 cm3) and double acting 121DA 1.20 in3 (19.7 cm3) and double acting HAND PUMP MOUNTING: Omit Standard vertical mounting H Horizontal-mounting brackets (must use 50, 65, 80, or 95 tank option) TANK: in3 (12 in. height and 1/4 NPT in3 (10 in. height and 1/4 NPT in3 (8 in. height and 1/4 NPT in3 (6 in. height and 1/4 NPT TL 2 in. tank used in conjunction with customer s external reservoir (1/4 NPT filler port). NT Does not come with tank, adjust able relief and release valve. (61DA and 121DA only) RP Return port (1/4 NPT return port, cannot be used with the NT option.). HP EXAMPLES OF COMMON MODEL CODES: HP22SA in3 (3.3 cm3) displacement, single acting and 50 in3 (819 cm3) tank. HP61DA in3 (9.8 cm3) displacement, double acting and 95 in3 (1557 cm3) tank. HP121DA in3 (19.7 cm3) displacement, double acting and 65 in3 (1065 cm3) tank. HP COMPLETE LIST OF OPTIONS AND ACCESSORIES: HP22-K.Seal kit for HP22SA. HP22-K-EPR...Ethylene propylene rubber (EPR) seal kit for HP22SA. HP61-K.Seal kit for HP61DA. HP121-K...Seal kit for HP121DA. H-4 HP REV(D)

5 Dimensional Data DIMENSIONAL DATA: Inches & [millimeters] DIMENSIONS LISTED ARE THE SAME FOR ALL THREE PUMP SERIES (HP61DA SHOWN) ADJUSTABLE RELIEF 3.25" [82.5] 6.75" [171.5] 3.25" [82.5] OUTLET BRA YD ICS P.N. S.N. 3/4" PIPE ] 7.1 RELEASE VALVE 3.41" [86.6] 3.50" [88.9] FILL PLUG (1/4" NPT) COVER 80 CU. IN. 65 CU. IN. 50 CU. IN. BODY 4.05" [103.0] TL (1/4" NPT PORT) 2"[50.8] 1.84" [46.7] TANK 1.48" [37.7] 12"[304.8] 10"[254] 8"[203.2] 6"[152.4] Ø0 20"[508] 4X 95 CU. IN. " [Ø " [103.0] #6 SAE OUTLET 1/4" NPT RETURN PORT (RP, OPTIONAL) H-5

6 Dimensional Data HPHand Operated Hydraulic Pumps DIMENSIONAL DATA: Inches & [millimeters] DIMENSIONS LISTED ARE THE SAME FOR ALL THREE PUMP SERIES (HP61DA AND HP121DA SHOWN) MOUNTING BRACKET FILL/VENT PLUG (1/4" NPT) 4X Ø0.39" [Ø9.92] 4.00" [101.6] 2.88" [73.0] 3/4" PIPE ADJUSTABLE RELIEF TANK RELEASE VALVE #6 SAE OUTLET 1/4" NPT RETURN PORT (RP, OPTIONAL) 22.49" [571.2] 16.67" [423.5] 12" TANK SHOWN 15.8" [401.3] (12" TANK) 13.8" [350.5] (10" TANK) 11.8" [299.7] (8" TANK) 9.8" [248.9] (6" TANK) BODY H-6 HP REV(D)

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

4-Way Directional Control Valve With Hydraulic Kick Out

4-Way Directional Control Valve With Hydraulic Kick Out Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30

More information

DC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF

DC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF Engineering & Manufacturing Solutions Specifications: Rated for 0-45 gpm (0-170 lpm) Rated for 3000 psi (207 bar) Std. port sizes (Consult factory for others) - 3/4 NPT all ports - #16 SAE (1-5/16-12)

More information

4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications:

4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications: Engineering & Manufacturing Solutions With Pressure Compensated Flow Control Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 6-1/2 lbs. (2.9 kg) 30 Micron filtration

More information

Monoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB

Monoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB Engineering & Manufacturing Solutions Specifications: FLOW RATINGS: - MB21 & MB22 10 gpm (38 lpm) - MB23 8 gpm (30 lpm) Rated up to 4000 psi (275 bar). Port Sizes: - Inlet/Outlet #8 SAE. -Work Ports #8

More information

EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control

EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.

More information

36EFC. Series & EFC Valve Package

36EFC. Series & EFC Valve Package Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See

More information

FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL

FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL B Certificate FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL FC1 FC ISO 91:2 WIT DESIGN #2.2.1 FC1-3/ INLET (IN) FC FCB1-3/ INLET (IN) FCR1-3/ FCR1 INLET (IN) FEATURES: DIAMOND ONED SPOOL BORE

More information

Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions

Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69

More information

Series 34. Sectional Directional Control Valve Specifications: P34A Engineering & Manufacturing Solutions

Series 34. Sectional Directional Control Valve Specifications: P34A Engineering & Manufacturing Solutions Engineering & Manufacturing Solutions Specifications: 12 gpm (45.4 lpm) Nominal Capacity (see flow chart). 3500 psi (241 bar). 400 psi (27 bar) max tank pressure. 12 sections max (consult factory for more).

More information

VIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS

VIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,

More information

Electric, Pilot or Manual Double Selector Valve PDS10BE1SN PDS12BK PDS12BLS PDS12BPS

Electric, Pilot or Manual Double Selector Valve PDS10BE1SN PDS12BK PDS12BLS PDS12BPS Engineering & Manufacturing Solutions Specifications: S Electric, Pilot or Manual ouble Valve oils: - 12 V, 3.5 ohms, 40 watts, and 3.5 amps - 24 V, 14 ohms, 40 watts, and 1.75 amps - 120 VA, 300 ohms,

More information

3000 psi (207 bar) Output/ min. 115 VAC 10cc (0.61 cu. in.) 24 VDC 12cc (0.73 cu. in.) Discharge Element Output Port.

3000 psi (207 bar) Output/ min. 115 VAC 10cc (0.61 cu. in.) 24 VDC 12cc (0.73 cu. in.) Discharge Element Output Port. MultiPort Lubricator Grease, Injector General The MultiPort Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with injector systems. The unit includes two pumping

More information

Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA

Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.

More information

CXL2 Injectors & Manifolds

CXL2 Injectors & Manifolds CXL2 Injectors & Manifolds Premium Single Line Grease Systems General Designed for use in single line high pressure automatic grease systems, CXL2 Injectors deliver precise volumes of lubricant at predetermined

More information

HPVR-10 AXIAL PISTON PUMPS

HPVR-10 AXIAL PISTON PUMPS The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that

More information

PNEUMATIC RACK & PINION ACTUATOR

PNEUMATIC RACK & PINION ACTUATOR PNEUMATIC RACK & PINION ACTUATOR Automax S-Series DOUBLE ACTING SPRING RETURN 1 Integral travel stops in both directions with 10 degrees of overtravel to assure precise adjustment of both the open and

More information

DP3 Pump. 3:1, Air-operated, Oil. General. Operation. Technical Data. Installation R0 10/09. 35a 35b 35c

DP3 Pump. 3:1, Air-operated, Oil. General. Operation. Technical Data. Installation R0 10/09. 35a 35b 35c DP3 Pump 3:1, Air-operated, Oil General The DP3 Pump is a compressed air-operated piston reciprocating medium pressure pump. Suitable for medium flow transfer of high viscosity lubricants and for oil delivery

More information

4 WAY DIRECTIONAL CONTROL VALVE AO

4 WAY DIRECTIONAL CONTROL VALVE AO B Certificate 4 WAY DIRECTIONAL CONTROL VALVE AO ISO 91:2 WITH DESIGN #2.2.1 AO12O4LS B A P T AO12T4JRD FEATURES: SMALL AND COMPACT to fit your design requirements. POSITIVE METERING in either direction

More information

Series RFL In-Line Filter

Series RFL In-Line Filter APPLICATION Series RFL In-Line Filter Pressures 2 bar Flows to 400 l/min HYDAC RFL In-Line Filters are designed for in-line mounting. These filters can be used in hydraulic, flushing, and for extraction

More information

Your key to maximum design flexibility with seriesprogressive

Your key to maximum design flexibility with seriesprogressive Bulletin 10102 R MSP Modular Divider Valves Your key to maximum design flexibility with seriesprogressive reliability. IDEX CORPORATION LUBRIQUIP, INC., A Unit of IDEX Corporation 1995. All Rights Reserved.

More information

HIGH PRESSURE FILTERS

HIGH PRESSURE FILTERS HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,

More information

Series RFLD Duplex In-Line Filter

Series RFLD Duplex In-Line Filter APPLICATION Series RFLD Duplex In-Line Filter Welded Pressures to 230 psi Flows to 3900 gpm HYDAC RFLD in-line filters are designed for in-line mounting and are mainly used in continuously operating systems.

More information

aero2 Pneumatic Actuator

aero2 Pneumatic Actuator The pneumatic rack & pinion actuator is manufactured using the latest materials and methods to provide dependable and smooth operation in demanding process control conditions. aero2 DESIGN FEATURES Hard

More information

L3 SERIES COMPACT PUMPS

L3 SERIES COMPACT PUMPS L3 SERIES COMPACT PUMPS PORTABLE ECONOMICAL LIGHTWEIGHT EASY TO INSTALL & OPERATE REQUIRES NO LUBRICATION IDEAL FOR OEM APPLICATIONS SC air driven compact liquid pumps operate on the principal of differential

More information

Series PVP Variable Volume Piston Pumps

Series PVP Variable Volume Piston Pumps Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only

More information

PRODUCT OVERVIEW. Our Mission:

PRODUCT OVERVIEW. Our Mission: PRODUCT OVERVIEW Material Handling Construction Agriculture Waste Management Industrial Our Mission: Brand Hydraulics Co. will conduct business with integrity and strive to exceed customer expectations

More information

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R3 09/09

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R3 09/09 MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed output pumping elements to discharge grease

More information

PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS

PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)

More information

MHH Modular Divider Valves

MHH Modular Divider Valves Manzel MHH Modular Divider Valves Available Electronic Only Modular, Series-Progressive, Divider Valve Delivers Positive Oil Lubrication for Gas Engines, Compressors and Similar Equipment at Pressures

More information

MP18 Stacking Valve System Technical Information Manual

MP18 Stacking Valve System Technical Information Manual Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18 Stacking Valve System Technical Information Manual The Drive & Control Company Copyright 1996 Bosch

More information

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451. Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component

More information

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R6 08/17

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R6 08/17 MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to

More information

RCI 200 Series Actuators

RCI 200 Series Actuators PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact

More information

Moduflow Series IL2/RF2/CF2 Low Pressure Filters

Moduflow Series IL2/RF2/CF2 Low Pressure Filters IL/RF/CF Low Pressure Filters 35 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile filter available

More information

Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit

Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style

More information

Equipment Coll-O-Crimp Pumps

Equipment Coll-O-Crimp Pumps s T-402-2 Air/Hydraulic For use with T-400-1. (Some models have air port on right side) that a filter, regulator, lubricator and air pressure gauge be installed in the air line as close as possible to

More information

Fill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer)

Fill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer) GPO ubricator Motor-driven gear pump, Oil General The GPO ubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors

More information

400 psi (28 bar) PDI & INJ. 100 psi (7 bar) PDI & INJ

400 psi (28 bar) PDI & INJ. 100 psi (7 bar) PDI & INJ Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is

More information

ZEM Injector. Series 32, 33, 34, 35, 39. General. Operation. Features. Technical Data. Injector Outputs R2 08/10

ZEM Injector. Series 32, 33, 34, 35, 39. General. Operation. Features. Technical Data. Injector Outputs R2 08/10 ZEM Series 32, 33, 34, 35, 39 General The ZEM Series injector line are positive displacement injectors (PDI) that deliver precise and controlled lubrication outputs which meet exact requirements for diverse

More information

Pressure Instrument Testing Equipment

Pressure Instrument Testing Equipment Pressure Instrument Testing Equipment BULLETIN TE-1 A Halliburton Company A Durable, Portable Primary Standard Model 1305D Deadweight Tester The Ashcroft 1305D Deadweight Tester is an affordable, portable

More information

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R8 08/18

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R8 08/18 MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to

More information

SY Series Scotch Yoke Actuators

SY Series Scotch Yoke Actuators SY Series Scotch Yoke Actuators Engineering Creative Solutions for Fluid Systems Since 1901 FEATURES MODULAR DESIGN The Pratt Industrial SY series scotch yoke actuator has a highly efficient and interchangeable

More information

Tork-Mor Series Vane Style Hydraulic Rotary Actuators

Tork-Mor Series Vane Style Hydraulic Rotary Actuators Vane Style Hydraulic Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features...2 Ordering Information...3 Specifications...4 Dimensional Data...5 Mounting... 6-7 Shaft...7 Limit Switch Actuator...7

More information

Solutions. Hydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Models and with Pilot Operated Checks

Solutions. Hydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Models and with Pilot Operated Checks H y d r a u l i c s Hydraulics Eaton Directional Control Valves h y d r a u l i c s Models 31520 and 31530 with Pilot Operated Checks We Manufacture No. 11-501 March 1991 Solutions S o l u t i o n s H

More information

DP5 Pump. 5:1, Air-operated, Heavy Duty, Oil. General. Operation. Technical Data. Installation R1 09/10

DP5 Pump. 5:1, Air-operated, Heavy Duty, Oil. General. Operation. Technical Data. Installation R1 09/10 DP5 Pump 5:1, Air-operated, Heavy Duty, Oil General The DP5 Pump is a compressed air-operated reciprocating piston medium pressure pump. These pumps are suitable for distribution of all types of light

More information

Material Specifications

Material Specifications 5.2012.12.b 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive

More information

MultiPort II Lubricator

MultiPort II Lubricator MultiPort II Lubricator Mobile, PDI, Grease General The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with positive displacement injector(pdi)

More information

D5 & 10-5 SERIES AIR OPERATED LIQUID PUMPS

D5 & 10-5 SERIES AIR OPERATED LIQUID PUMPS D & 1- SERIES AIR OPERATED LIQUID PUMPS PRESSURE RATIO OLD & NEW PART NUMBERS In the mid 199 s with the advent of a new inventory and computer system, SC Hydraulic Engineering was forced to change the

More information

PFM6 Digital Portable Hydraulic Tester

PFM6 Digital Portable Hydraulic Tester PFM6 Digital Portable Hydraulic Tester temperature Helical tube pressure gauge One toggle switch to control power and pressure Platinum resistance temperature sensor Pressure surge protection with internal

More information

Current Steering Module ECM0001

Current Steering Module ECM0001 Engineering & Manufacturing Solutions Current Steering Module ECM0001 ISO 9001:2008 WITH DESIGN Certificate #02.002.1 Features / Description / Specifications ECM0001Current Steering Module FEATURES: Eliminates

More information

Pressure Control Valves

Pressure Control Valves Catalog HY15-351/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/ DIRECT ACTING RDH42... C4-2... Direct Acting Relief, Poppet Type... 3.8/1...

More information

RCI 200 Series Actuators

RCI 200 Series Actuators PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact

More information

Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:

Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP: VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.

More information

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves

Swagelok Alternative Fuel Ser vice (AFS) Ball Valves www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C

More information

Double Pump Operating Specifications

Double Pump Operating Specifications Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12

More information

BV3H & BV4H True Multi-Way

BV3H & BV4H True Multi-Way 6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H

More information

HPV-10 AXIAL PISTON PUMPS

HPV-10 AXIAL PISTON PUMPS SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT

More information

HPV-15 AXIAL PISTON PUMPS

HPV-15 AXIAL PISTON PUMPS SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT

More information

HYDRAULICS VINCKE HYDRAULIC PUMPS

HYDRAULICS VINCKE HYDRAULIC PUMPS VINCKE HYDRAULIC PUMPS TECH-VHP200.1 index 3 link to your page / link a su página Gear pumps Introduction 3 Group 0 3 Group 1 3 Group 2 3 Group 3 4 6 7 12 18 Variable displacement pumps 21 Hand pumps 3

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

Catalog Little Champ Hydraulic Power Units

Catalog Little Champ Hydraulic Power Units Catalog Little Champ Hydraulic Power Units 3 AND 5 Gallon Capacity General Specifications/Table of Contents Little Champ Power Units are designed for use in locations where space is limited and larger,

More information

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating

More information

Instruction Manual for Model HYDRO 12-KP 11-3 PHASE GENERATOR. Hydraulic Generator. Manufacturing of: Vehicle Mounted Generators Hydraulic Generators

Instruction Manual for Model HYDRO 12-KP 11-3 PHASE GENERATOR. Hydraulic Generator. Manufacturing of: Vehicle Mounted Generators Hydraulic Generators Setting the Standard in Mobile Power Instruction Manual for Model HYDRO 12-KP 11-3 PHASE GENERATOR Hydraulic Generator Manufacturing of: Vehicle Mounted Generators Hydraulic Generators P.O. Box 582 Chester,

More information

HPV-15 AXIAL PISTON PUMPS

HPV-15 AXIAL PISTON PUMPS SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09

More information

MP18/SIC & SIO Stacking Valve System Technical Information Manual

MP18/SIC & SIO Stacking Valve System Technical Information Manual Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright

More information

BULLETIN OCTOBER DeZURIK ROTARY DIAPHRAGM ACTUATORS

BULLETIN OCTOBER DeZURIK ROTARY DIAPHRAGM ACTUATORS BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:

More information

F SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc.

F SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc. ALL NEW DESIGN F SERIES GEAR PUMP ALL NEW DESIGN Ultimate power and performance in a small package best describes the all new F Series gear pumps. Designed exclusively for those low flow applications.

More information

Available manual, pneumatic, and hydraulic spool control kits.

Available manual, pneumatic, and hydraulic spool control kits. Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,

More information

Engineering Data Pack C Series and 4300 Series Pumps

Engineering Data Pack C Series and 4300 Series Pumps Engineering Data Pack Series and 4300 Series Pumps Excellence at work. Excellence in life. Table of ontents Product Overview 3 2F Features 3 2E Features 3 2B/4310 Features 3 K2B Features 3 2FA Features

More information

Hydraulic Master Cylinders

Hydraulic Master Cylinders Hydraulic Master Cylinders flange mount and side mount, straight-bore and two-stage cylinders Hydraulic Cylinders for Mobile and Industrial Applications Why choose MICO? MICO, Incorporated designs, manufactures

More information

HIGH PRESSURE FILTERS

HIGH PRESSURE FILTERS APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 4 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold block

More information

Pressure Control Valves

Pressure Control Valves Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal

More information

BULLTIN B PISTON ACTUATOR. The Actuator that Delivers Maximum Torque for Minimum Air Consumption

BULLTIN B PISTON ACTUATOR. The Actuator that Delivers Maximum Torque for Minimum Air Consumption BULLTIN B60 PISTON ACTUATOR The Actuator that Delivers Maximum Torque for Minimum Air Consumption TABLE OF CONTENTS: COMPACT DESIGN PRINCIPLE OF OPERATION PARTS LIST MAIN FEATURES TORQUEMETRIC TORQUEIMPERIAL

More information

Worcester Controls Directional Ball Valves

Worcester Controls Directional Ball Valves Worcester Controls Directional Ball Valves Series D44/D4, Series D51, Series 18/19 Experience In Motion Page 2 Series D44/D4, ½ " 2" Bottom Entry Page 6 Series D51, 2" 8" Bottom Entry Page 9 Series 18/19,

More information

Airmatic Lubricator. Pneumatic Operation, Oil. General. Application. Operation. Technical Data

Airmatic Lubricator. Pneumatic Operation, Oil. General. Application. Operation. Technical Data Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is

More information

MH Modular Divider Valves Product Specs and Ordering. and. Bulletin Revised October 2000

MH Modular Divider Valves Product Specs and Ordering. and. Bulletin Revised October 2000 Bulletin 10103 R and MH Modular Divider Valves Product Specs and Ordering Modular, Series- Progressive, Divider Valve Delivers Positive Oil Lubrication for Gas Engines, Compressors and Similar Equipment

More information

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the

More information

V Series AXIAL PISTON PUMP ORDER CODE

V Series AXIAL PISTON PUMP ORDER CODE V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,

More information

HIGH PRESSURE FILTERS

HIGH PRESSURE FILTERS APPLICATION HIGH PRESSURE FILTERS For Manifold Block Side Mounting Series DF...QE Pressures to 4 psi Flows to 18 gpm HYDAC DF...QE High Pressure Filters are designed to be side mounted directly onto the

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main

More information

DP556 Pump. 55:1, Air-operated, Grease. General. Operation. Technical Data. Installation. Mounting with Reinforced Cover (Recommended)

DP556 Pump. 55:1, Air-operated, Grease. General. Operation. Technical Data. Installation. Mounting with Reinforced Cover (Recommended) DP556 Pump 55:1, Air-operated, Grease General The DP556 Pump is a compressed air-operated reciprocating piston pump. This high capacity demand pump is compatible with mineral and synthetic grease and suitable

More information

Behringer Ball Valve Ordering Code

Behringer Ball Valve Ordering Code Ball Valve Catalog Behringer Ball Valve Ordering Code 1 Behringer 2-Way Ball Valves Block Body Valves with Threaded Connections Size Range: 1/4-1 Steel Material Delrin Ball Seats (Others available on request)

More information

Use Type C control units. Viscosity range is 100 to 10,000 SSU at operating temperature. See Bijur Engineering Manual for system limitations.

Use Type C control units. Viscosity range is 100 to 10,000 SSU at operating temperature. See Bijur Engineering Manual for system limitations. V5W Lubricator Automatic Continuous Operation The V5W Lubricator consists of a motor-driven gear pump, with a controlled bypass valve. (constant volume or constant pressure models) The fully automatic

More information

OPERATOR S MANUAL AND SALES AND ENGINEERING DATA

OPERATOR S MANUAL AND SALES AND ENGINEERING DATA OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General

More information

Radial piston motor for compact drives MCR-C

Radial piston motor for compact drives MCR-C Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm

More information

ALUMINUM HIGH PERFORMANCE GEAR PUMPS

ALUMINUM HIGH PERFORMANCE GEAR PUMPS ALUMINUM HIGH PERFORMANCE GEAR PUMPS FEATURES EXTRUDED ALUMINUM DIE CAST BODY ALUMINUM MOUNTING FLANGE / COVER FLOATING AXLE SLEEVE AND DU BEARINGS DOUBLE LIP SHAFT SEAL TO PREVENT CAVITATION AND LEAKAGE

More information

Monarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.

Monarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category. Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve

More information

GEAR PUMPS DIMENSIONAL DETAILS

GEAR PUMPS DIMENSIONAL DETAILS DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310

More information

Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS

Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters

More information

60VSERIES PFD-30 MSV-16 RV-30, RV-60. Muncie Power Products MP95-08 (Rev. 5-05) Printed in the U.S.A. Muncie Power Products, Inc VALVE WARRANTY

60VSERIES PFD-30 MSV-16 RV-30, RV-60. Muncie Power Products MP95-08 (Rev. 5-05) Printed in the U.S.A. Muncie Power Products, Inc VALVE WARRANTY VALVE WARRANTY The Muncie 60V Series Valve is warranted against any defect in material and workmanship which existed at the time of sale by Muncie, according to the following provisions, subject to the

More information

Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.

Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards. VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60

More information

NV452 Monoblock directional control valve

NV452 Monoblock directional control valve NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever

More information

T550 COMPACT TRACK LOADER SPECIFICATIONS

T550 COMPACT TRACK LOADER SPECIFICATIONS T550 COMPACT TRACK LOADER SPECIFICATIONS Loader Dimensions Dimensions are given for loader equipped with standard tracks and 68 in. Construction and Industrial bucket and may vary with other bucket types.

More information

HYDRAULICALLY DRIVEN PUMPS SELECTION GUIDE VERSION

HYDRAULICALLY DRIVEN PUMPS SELECTION GUIDE VERSION HYDRAULICALLY DRIVEN PUMPS SELECTION GUIDE VERSION 1 9.09 1 TABLE OF CONTENTS PAGES HYDRAULIC PUMPS/MOTORS OVERVIEW 1-11 HYDRAULIC SUBASSEMBLY FEATURES... 12 FM5 & 8 Performance curves 13-18 Dimensional

More information

S530 SKID-STEER LOADER SPECIFICATIONS

S530 SKID-STEER LOADER SPECIFICATIONS Loader Dimensions S530 SKID-STEER LOADER SPECIFICATIONS Dimensions are given for loader equipped with standard tires and 68 inch Construction and Industrial bucket and may vary with other bucket types.

More information

V250 SERIES DIRECTIONAL CONTROL VALVES

V250 SERIES DIRECTIONAL CONTROL VALVES V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated

More information

Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area

Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves

More information

KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA

KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves

More information

Radial piston motors for industrial applications MCR-D

Radial piston motors for industrial applications MCR-D Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450

More information