Dhatec Document No.: DHA415-APS-PH
|
|
- Britton Shelton
- 5 years ago
- Views:
Transcription
1 Elskensakker 8, NL-5571 SK Bergeijk, The Netherlands Tel Fax Web Application Procedure Specification Dhatec Pipe Hook Dhatec Document No.: DHA415-APS-PH Rev. Date Status Prepared by Reviewed by Approved by For Construction M.Hol A.S.Sridharan A.S.Sridharan For Construction M.Hol D.Neutkens I.v.Assema For Construction M.Voets M. Bayens M. Bayens Dhatec BV. The following document shall be considered as copyright and the design right reserved. Copying and/or disclosure of the information contained within the following document to any third-party, other than specifically for the purpose of the project is forbidden without prior written permission of the proprietor. Page 1 of 7
2 Elskensakker 8, NL-5571 SK Bergeijk, The Netherlands Tel Fax Web Change Record Rev. Description of Revision 00 First Issue 01 General update + layout 02 Font style Page 2 of 7
3 General Information Equipment Pipe Hook Supplier Name Dhatec B.V. Telephone No Fax No Contact address Disclaimer of liability: Every effort has been made to ensure that the information in this document is accurate and correct to the best of our knowledge, correct at the date of publication. However, Dhatec B.V. cannot be held responsible for consequences that follow from the claims that were made in this document. Do not carry out any repairs or modifications on the equipment without consulting Dhatec B.V., doing so will invalidate the guarantee. The guarantee is also invalidated if accidents and damage of any form are caused as a result of improper use and/or not obeying the warnings in general as explained in this user guide. Dhatec B.V. accepts no responsibility for any personal accidents as a consequence of not following the safety instructions and warnings. This is also the case for consequential loss in any form. Page 3 of 7
4 Safety Requirements These are general guidelines, all personnel involved should adhere to the safety requirements of the particular location at which they are performing their operations. Dhatec recommends wearing of suitable PPE while handling their products. This includes gloves, safety shoes, safety glasses, safety helmet, hearing protection and suitable work clothing. The working areas should be kept tidy at all times in order to minimize the risk of trips and slips. All personnel involved should use suitable manual handling techniques and follow industry recommended guidelines for lifting and moving, such as those described in Ergonomic Guidelines for Manual Material Handling published by the National Institute for Occupational Safety and Health (Publication ), or those otherwise prescribed by the client. The Pipe Hooks are exclusively for horizontal lifting and transporting of pipes. The Pipe Hooks can only be used in pairs while using a two-leg sling or spreader beam. All the Pipe Hooks and Shackles supplied by Dhatec, are provided with a unique registration mark. Never use a Pipe Hook or Shackle without these registration marks or when there is no valid test certificate available. The operating temperature of the Dhatec Pipe Hooks is between -30 ⁰C (-22 ⁰F) and +80 ⁰C (176 ⁰F). For other ambient temperatures, contact Dhatec. Page 4 of 7
5 Equipment The Pipe Hook Premium (figure 1.) is available with a WLL of 5 ton/set up to 60 ton/set. Figure 1. Pipe Hook Premium The Pipe Hook Standard (figure 2) is available with a WLL of 4 ton/set up to 20 ton/set. Figure 2. Pipe Hook Standard The Main Shackle (figure 3) is used to connect the Premium Pipe Hook to the chain or sling of the crane. A Shackle Protector (figure 4) is used to prevent damage to the pipe or coating that can be caused by the shackle. Figure 3. Main Shackle Figure 4. Shackle Protector To extend the lifetime of the Pipe Hooks, they must be stored in a dry and clean environment. The Pipe Hook Box (figure 5) can be used to store the Pipe Hook in a proper way. Figure 5. Pipe Hook Box If the plastic covers of the Pipe Hooks are damaged, they can be replaced with the Replacement Cover Set (figure 6). For replacement, use only original Dhatec parts. The cover sets are available for the Pipe Hook Premium and Pipe Hook Standard. Figure 6. Replacement Cover Set Page 5 of 7
6 General instructions for lifting with Dhatec Pipe Hooks - Before lifting check if the working load limit of the Pipe Hook and main Shackle is sufficient for the weight of the pipe. The Pipe Hook Standard comes with a shackle pin whereas Pipe Hook Premium is to be used together with a main shackle provided by Dhatec. - Remove grease and dirt from the Pipe Hook and Shackle so the equipment can be checked properly. - Check visually if the Pipe Hook or shackle is damaged, cracks or deformation (which is indicative of overload). In case of any doubts, please contact Dhatec before using the equipment. - Inspect the plastic parts of the Pipe Hook for wear and defects (the plastic parts must be free of contamination, dry and undamaged). The plastic parts must be replaced when the wear and tear or damages exceeds 10mm. - Each type of Pipe Hook has its specific lifting angle. Below you can find the required lifting angles for the Pipe Hook Standard and Pipe Hook Premium. α = 0-60 α = α α Figure 7. Lifting angle Pipe Hook Standard Figure 8. Lifting angle Pipe Hook Premium - Connect the Pipe Hook to the lifting equipment (make sure all attachment devices are approved and certified for the corresponding tonnage). - Place the Pipe Hook as deep as possible in the pipe, until it sits firmly in the back end of the jaws. Make sure that the hook is positioned in such a way as to balance the load when it is being lifted. - Lift steadily to allow effective gripping by the Pipe Hooks. - Make sure the load is stably positioned before the Pipe Hooks are removed. Pay attention to your own safety and to that of people around you! Keep a safe distance during lifting operations and never walk or stand under a lifted load. Page 6 of 7
7 Guidelines to check if the Pipe Hook is applied properly The Pipe Hook should be positioned leveled in the pipe end before starting lifting: - The Pipe Hook should be leveled in the pipe end. - The horizontal part must be in full contact with the internal surface of the pipe. The Pipe Hook must be placed completely inside the pipe until it sits firmly in the back end of the Pipe Hook: - There should be no distance between the pipe and vertical part of the Pipe Hook. Page 7 of 7
ABACO MACHINES OPERATION MANUAL STONE/STEEL/GLASS/WOODS LIFTER (ASSGWL20) ABACO MACHINES (USA)
ABACO MACHINES OPERATION MANUAL STONE/STEEL/GLASS/WOODS LIFTER (ASSGWL20) ABACO MACHINES (USA) 14508 S. Garfield Ave., Paramount, CA 90723, USA Tel : 310-532-0366 Fax : 310-532-99 Email : sales@abacomachines.com
More informationTranslation of the Original operating instructions Lifting device Z 70 /...
Translation of the Original operating instructions Lifting device Z 70 /... Content 1. Lifting device / Correct use according to regulations 2. Basic principles 3. General information 4. Special remarks
More informationRev. 10/27/2015 CDL-2000, MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com CDL-2000
More informationBEAM CLAMP INSTRUCTION MANUAL
BEAM CLAMP INSTRUCTION MANUAL Imported exclusively for the Global Lifting Group by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. 2 SAFETY INSTRUCTIONS THE FOLLOWING SAFETY INSTRUCTIONS OUTLINE THE CARE
More informationABACO GLASS LIFTER (AGL38)
ABACO MACHINES ABACO GLASS LIFTER (AGL38) ABACO MACHINES (USA) 14508 S. Garfield Ave., Paramount, CA 90723, USA Tel : 310-532-0366 Fax : 310-532-0499 Email : sales@abacomachines.com Website : www.abacomachines.com
More informationALULIFT Portable Aluminium Gantry Crane Operation & Maintenance Instructions
ALULIFT Portable Aluminium Gantry Crane Tel: +44 (0)115 932 7010 Fax: +44 (0)115 9306263 Email: sales@metreel.co.uk Website: www.metreel.co.uk CONTENTS Caution...3 Pre-Build Check List...4 Initial Set
More informationSBRL-SERIES SPREADER BEAMS INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: info@vestil.com
More informationUser Manual. T29870 Beam Clamp. Original Instructions. Rev /08//14.
User Manual T29870 Beam Clamp Original Instructions Rev 1.0-12/08//14 www.doughty-engineering.co.uk Contents Introduction... 2 Exclusion of Liability... 2 Safety Instructions... 2 Operation... 3 Maintenance...
More informationOperating Instructions and Parts Manual 3-1/2 ton Farm Jack Model FJ-3-1/2A
Operating Instructions and Parts Manual 3-1/2 ton Farm Jack Model FJ-3-1/2A JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-440436 Ph.: 800-274-6848 Revision A1 06/2014 www.jettools.com Copyright
More informationOperating Instructions. TM Girder Clamps
Operating Instructions TM Girder Clamps Original operating instructions in keeping with the EC Machinery Directive TM-BC-10 TM-BC-20 TM-BC-30 TM-BC-50 TM girder clamps meet requirements as per EU Machinery
More informationGuidelines for Safety Training of Overhead Crane Operators and Supervisors
Guidelines for Safety Training of Overhead Crane Operators and Supervisors Purpose These guidelines present minimum recommended safety requirements for ensuring the safe and efficient operation of overhead
More informationMG12K24T60V4 Mechanical Grapple
170 State Route 271 Attachment Solutions MG12K24T60V4 Mechanical Grapple Operators Manual KENCO Mechanical Grapple Operation Manual 1 TABLE OF CONTENTS 170 State Route 271 Section I. General Information....
More informationSANTA CRUZ BICYCLES MY18 Hightower Suspension Setup
SANTA CRUZ BICYCLES MY18 Hightower Suspension Setup Copyright Santa Cruz Bicycles 2017 TABLE OF CONTENTS SAFETY INSTRUCTIONS... 3 SAG SETUP...3 AIR SPRING FORKS...3 AIR SHOCKS...3 FORK SETUP... 4 FOX 36
More informationT Series (N6052T) Solar Battery Hybrid System. Installation Manual Version 1.1
T Series (N6052T) Solar Battery Hybrid System Installation Manual Version 1.1 Content 1. Safety... 1 1.1 How to Use This Manual... 1 1.2 Safety Rules... 1 1.3 Warning Notices Affixed to the Device... 2
More informationLifting tool forloadbearing sheet
www.ruukki.com Lifting tool forloadbearing sheet User manual Contents Description and intended use... 2 Ce-marking... 2 Lifting capacity... 3 Parts... 3 Load features... 4 Making the lift... 4 Preparing
More informationGeneral Operating Manual
This Operating Manual is valid for the following hydraulic components of MOTRAC-Hydraulik GmbH: IMA V-Manifold-Blocks Blocks IMA V-Mounting-Units Units Valves and Housings IMA V-Sandwich plates IMA V-Mounting-plates
More informationThe information in this instruction manual is subject to modifications without prior notice and is the exclusive property of Zorzini.
Dear Customer, Thank you for choosing a Zorzini S.p.A. product. Zorzini manway doors and manhole covers 1 are designed and manufactured according to the highest standards in regards safety, functionality
More informationSANTA CRUZ BICYCLES MY17 Nomad Suspension Setup
SANTA CRUZ BICYCLES MY17 Nomad Suspension Setup Copyright Santa Cruz Bicycles 2017 TABLE OF CONTENTS SAFETY INSTRUCTIONS... 3 SAG SETUP...3 AIR SPRING FORKS...3 AIR SHOCKS...3 FORK SETUP... 4 LYRIK SOLO
More informationREDEXIM-BLEC BOX-GRADER 1800 / LASER- GRADER Serial number: User Manual and Parts Book. Original manual
User Manual and Parts Book REDEXIM-BLEC BOX-GRADER 1800 / LASER- GRADER 1800 Serial number: Kwekerijweg 8 3709JA Zeist The Netherlands Tel.: (31)30-6933227 Fax: (31)30-6933228 Email: verti-drain@redexim.com
More informationRig Master Power by Mobile Thermo Systems Inc.
RigMaster Power Dealer Warranty Policy The Limited Warranty This limited warranty applies to the RigMaster Auxiliary Power Unit (RigMaster APU) which consists of the following components: 1. The generator
More informationGB Instruction for use BA16.45PLMGB POWERTEX Permanent Lifting Magnet model PLM
GB Instruction for use BA16.45PLMGB08.08.17 POWERTEX Permanent Lifting Magnet model PLM 1 POWERTEX Permanent Lifting Magnet PLM 100 kg 2 ton Instruction for use (GB) (Original instructions) These instructions
More informationPLATE CLAMPS INSTRUCTION MANUAL
PLATE CLAMPS INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand Universal Plate Clamp 1 Horizontal Plate
More informationCO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080
CO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080 STI S.r.l has taken every care in collecting and verifying the documentation contained in this Instruction Manual. The information herein contained are
More informationRadian Research, Inc. makes no warranty on the accuracy of the information contained in this Operations Manual and accepts no liability for its use.
About This Operations Manual makes no warranty on the accuracy of the information contained in this Operations Manual and accepts no liability for its use. The information contained in this Operations
More informationSANTA CRUZ BICYCLES MY18 Nomad Suspension Setup
SANTA CRUZ BICYCLES MY18 Nomad Suspension Setup Copyright Santa Cruz Bicycles 2017 TABLE OF CONTENTS SAFETY INSTRUCTIONS... 3 SAG SETUP...3 AIR SPRING FORKS...3 AIR SHOCKS...3 COIL SHOCKS...4 FORK SETUP...
More informationOperator s Manual. Fairbanks FH Series by Fairbanks Scales, Inc. All rights reserved. . Revision 1 06/2017
Operator s Manual Fairbanks FH Series 2017 by Fairbanks Scales, Inc. All rights reserved 51393. Revision 1 06/2017 Amendment Record Fairbanks FH Series Operator s Manual Operator s Manual Document 51393
More informationHARFORD SAFELOCK MECHANICAL QUICK HITCH
HARFORD SAFELOCK MECHANICAL QUICK HITCH Installation & Operation Manual Important: This manual must be kept with the excavator at all times and referred to as required Harford Attachments Ltd Table of
More informationHOOK-BASE INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-339 www.vestilmfg.com e-mail: sales@vestil.com
More informationLAD-MM Series Mobile Ladder Stands Instruction Manual
Rev..8.07 LAD-MM, MANUAL Vestil Manufacturing Corp. 999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (60) 665-7586 -or- Toll Free (800) 348-0868 Fax: (60) 665-339 Web: www.vestilmfg.com
More informationInstallation and operating instructions. BPW Landing gear. BPW-BA-SV e
Installation and operating instructions BPW Landing gear BPW-BA-SV 37451601e Page 2 BPW-BA-SV 37451601e BPW-BA-SV 37451601e Page 3 Contents: Intended use 2 1. General safety notes... Page 2 2. Intended
More informationSafelift Overhead Runway Beams & Rolling Beam Cranes
Operation & Maintenance Instructions Instructions for Safe Use Safelift Overhead Runway Beams & Rolling Beam Cranes Certification Safelift overhead runway beams and rolling beam cranes are lifting appliances
More informationOwner s Manual Gantry Cranes
Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman Equipment, Inc. 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushman.com
More informationUSER MANUAL Lifting tool for load-bearing sheet.
USER MANUAL Lifting tool for load-bearing sheet www.ruukki.com Contents DESCRIPTION AND INTENDED USE 3 CE-MARKING 3 LIFTING CAPACITY 4 PARTS 4 LOAD FEATURES 6 MAKING THE LIFT 6 PREPARING A LIFT 7 LIFTING
More informationINSTRUCTION MANUAL. Pacific Self-locking Beam Trolleys Pacific Adjustable Angle Clamps Pacific Top Girder Clamps
INSTRUCTION MANUAL Pacific Self-locking Beam Trolleys Pacific Adjustable Angle Clamps Pacific Top Girder Clamps IMPORTANT Please read this instruction manual before using these products. This manual contains
More informationSafety Clamps, Inc. Big Bite Lifting Clamps. HL-Lock Model Clamp
Big Bite Lifting Clamps Operation, Maintenance, and Repair Manual Clamp Warning Prior to operating your Safety Clamp, please ensure that All operators read and understand this manual. Effective May 1,
More informationMPG526-L Kayak Stacker Instructions
MALO LONER REV2 4/16 MPG526-L Kayak Stacker Instructions Installation and Loading Instructions - Please Read Before Beginning Whats included: (2) Kayak Stackers (2) Sets of Mounting Brackets: Upper and
More informationBPW Stützvorrichtungen BPW Landing Gear. BPW Bergische Achsen MONTAGE- UND BEDIENUNGSANLEITUNG INSTALLATION AND OPERATING INSTRUCTIONS
BPW Stützvorrichtungen BPW Landing Gear BPW Bergische Achsen MONTAGE- UND BEDIENUNGSANLEITUNG INSTALLATION AND OPERATING INSTRUCTIONS Montage - und Bedienungsanleitung Stützvorrichtungen BPW BERGISCHE
More informationRENFROE. WARNING: Before putting tool in service, take to your immediate supervisor.
WARNING: Before putting tool in service, take to your immediate supervisor. RENFROE Model NM Clamp Application, Operation and Maintenance Manual OM 211-NM Operators Manual This Operator s Manual covers
More informationIV STANDS. Assembly, Usage and Maintenance INSTRUCTION MANUAL
INSTRUCTION MANUAL IV STANDS Assembly, Usage and Maintenance Read and understand all of the instructions and safety information in this manual before operating this product. MAN-045 REV A 2018 MAC Medical,
More informationThomson Engineering Design Ltd. Drag Clamp. Operator s Instructions. Original Document in English Language. Issue 2 March 2015
Thomson Engineering Design Ltd Drag Clamp Operator s Instructions Original Document in English Language Issue 2 March 2015 Document Number: DC-Inst-01 Issue: 02 Date: March 2015 Introduction The Thomson
More informationBATTERY OPERATED PATIENT LIFT MODEL:650HD OWNER S MANUAL
BATTERY OPERATED PATIENT LIFT MODEL:650HD OWNER S MANUAL Thank you for choosing BestcareLift! To better serve you, please record the following information: Supplier Name: Telephone: Serial #: Date of Purchase:
More informationMAINTENANCE WORK INSTRUCTION. Mech OFF Replace Head Pulley CVXXX
OPF MAINTENANCE WORK INSTRUCTION PYXIS DOCUMENT CLEAN TEMPLATE SCOPE NOTE: SPECIAL TOOLING REQUIRED PREPARATION AND INFORMATION CVXXX Head Pulley The purpose of this document is to detail the safe replacement
More informationUser Manual Hoof trimmingcrush:sa0010. Version: User manual. Hoof trimming crush SA0010
User Manual Hoof trimming crush SA0010 Manufacturer: Wopa Constructiebedrijf BV Rector Hulshofstraat 10 7135 JV Harreveld The Netherlands : +31-(0)544 372415 : +31-(0)544 372445 Email: info@wopa.com Website:
More informationComplete Raised Rail Roof Rack System SR1098 SR1099
Complete Raised Rail Roof Rack System SR1098 SR1099 7 kg/15 lbs xx kg xx lbs Max. 68 kg/150 lbs Instructions Max load capacity 68 kg/150 lbs Before you begin, please read the assembly instructions carefully.
More informationHeavy Duty Four Wheeled Walker
Heavy Duty Four Wheeled Walker Weight Capacity: 500 lbs. ITEM # W1802 Made in China 2011 ESSENTIAL MEDICAL SUPPLY, INC. Manufactured for Orlando, FL 32822 -- SAVE THESE INSTRUCTIONS -- Do not attempt to
More informationOPERATIONS MANUAL LEVER CHAIN HOIST
OPERATIONS MANUAL LEVER CHAIN HOIST IMPORTANT SAFETY INFORMATION Please read, understand and follow all safety information contained in these instructions prior to the use of this hoist. Retain these instructions
More information1/2-TON MANUAL CHAIN HOIST
1/2-TON MANUAL CHAIN HOIST Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationINSTRUCTION MANUAL TITAN 16K - Fifth Wheel Hitch Plymouth MI
You can take it with you. INSTRUCTION MANUAL TITAN 16K - Fifth Wheel Hitch Plymouth MI Product No. 30866 DEALER/INSTALLER: END USER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching
More informationAssembly and Maintenance Manual Type RSBW
Assembly and Maintenance Manual Type RSBW Hatschekstr. 36 69126 Heidelberg Germany Tel +49(0)6221 30470 Tel +49(0)6221 304731 info@stieber.de www.stieber.de Stieber Clutch Date of issue: 16/03/2017 GB
More informationGeneral Instructions and Inspection Instructions for Crane
General Instructions General Instructions and Inspection Instructions for Crane Distributed by Ergonomic Partners Sales@ErgonomicPartners.com www.ergonomicpartners.com Tel: 314-884-8884 EN R_(EN)/1 --
More informationTechnical test - Theory. No. Question Answers Max. Mark
Technical test - Theory Crane/Lifting Operations- Supervisor A6 Questions Only MSLO pack No. Question Answers Max. Mark a) When and b) why are axle or suspension locks fitted to most mobile cranes? List
More informationfor CONSTRUCTION PROJECTS HOISTS & RIGGING PRODUCTS FOR CONSTRUCTION Power Plants Commercial Construction Wind Energy Bridges & Highways
A Complete Line of Products & Solutions for CONSTRUCTION PROJECTS HOISTS & RIGGING CONSTRUCTION Power Plants Commercial Construction Wind Energy Bridges & Highways TOUGH. RELIABLE. STRONG. Keeping Projects
More informationV2 02/11/15 D Newton P FitzPatrick. Changes to coupling and uncoupling processes Task. Coupling and Uncoupling Coupling. Uncoupling.
Safe Working Procedure: TAT Coupling and Uncoupling SWP 003 v2 Risk Assessment Ref: TAT - RA003 Revision Date Reviewed By Authorised By V2 02/11/15 D Newton P FitzPatrick Changes to coupling and uncoupling
More informationInstallation, Operating & Maintenance Instructions. HV gate valve with pneumatic actuator. Series 110 DN mm (I. D.
Installation, Operating & Maintenance Instructions HV gate valve with pneumatic actuator Series 110 DN 250 320 mm (I. D. 10" 12") This manual is valid for the following product ordering numbers: 11048-.
More information1000 lb. Adjustable Gantry Crane
1000 lb. Adjustable Gantry Crane Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationTurbocharger / VTR..0, VTR..1 Original assembly instructions English
Assembly Instructions Turbocharger / VTR..0, VTR..1 Original assembly instructions English This document is valid for the VTR..0/..1 series: VTR160, VTR200, VTR250, VTR320, VTR400 VTR161, VTR201, VTR251,
More information1000-lb Hydraulic Truck Crane
1000-lb Hydraulic Truck Crane Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information10 Year Limited Warranty
Power. On Your Terms. 10 Year Limited Warranty PHI 2.7 TM PHI 3.5 TM 60A SIMPLIPHI POWER, INC. REV020618 10 Year Limited Warranty: PHI 2.7 TM PHI 3.5 TM 60A 24V 48V Limited Pro-Rated Warranty Coverage
More informationOPERATION AND ASSEMBLY MANUAL HIGH JACK STANDS Models: RJS-1T RJS-1TF RJS-2TH
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS MANUAL
More informationVolume CHARGESTORM AB. Charging station model EVA Start and Protected. User Manual Start & Protected
Volume 1 CHARGESTORM AB Charging station model EVA Start and Protected User Manual EVA Start & Protected CHARGESTORM AB User manual EVA Chargestorm AB 2017 Hospitalsgatan 3 SE-602 27 Norrköping, Sverige
More informationUser Manual. H Frames. Original Instructions. Revision
User Manual H Frames Original Instructions Revision 1.3 Contents Contents: Introduction... 2 Exclusion of Liability... 2 Safety Instructions... 2 Assembly Examples... 4 Assembly... 5 Couplers... 6 Extensions...
More informationOperator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations
M S E R I E Operator Manual S This operator manual has information for all models of series M plus some options and accessories. Some of the illustrations and information may not The most apply to your
More informationBefore equipment use, please read this operation manual carefully. Serial Number: Date Purchased:
Pushed & Geared Trolleys OPERATION MANUAL This operation manual is intended as an instruction manual for trained personnel who are in charge of installation, maintenance, repair etc. Before equipment use,
More informationpanelclaw.com Polar Bear III for 10 Degree
panelclaw.com Polar Bear III for 10 Degree Installation Manual Document Number 9910024 Rev A March 2014 Revision History Rev ECO # Date Description of Changes Approved By 01 TBD 02-FEB-14 Initial Draft
More informationAnchormax Vertical Capstan
Anchormax Vertical Capstan Copyright Vetus-Maxwell APAC Ltd. All rights reserved. Vetus Maxwell APAC Ltd reserves the right to make engineering refinements on all products without notice. Illustrations
More informationNR LOGBOOK & USER MANUAL FOR MAINTENANCE AND USE OF THE. Compact Industrial Doors RED BOOK
LOGBOOK & USER MANUAL FOR MAINTENANCE AND USE OF THE NR 01-2011 Compact Industrial Doors RED BOOK All rights reserved: Reprinting, copying, processing, re-issuing and publication in any form or on any
More informationPIVOTING TANDEM CARRIER 558P
K PIVOTING TANDEM CARRIER 558P PARTS INCLUDED C A D I B D I G E J F part description part number qty. A front beam 1 B tail beam 1 C detent pin and tether 8535259 2 D wheel strap assembly 8535260 2 E handlebar
More informationOperating Instructions
Armaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel Operating Instructions BaseCom butterfly valve Rev.0 / 12.12.2009 Page 1 of 8 BA52290GB.doc
More informationAmsterdam Boats. High-quality luxury boats and hospitality. Conditions of use and disclaimer. Version: August 2018
High-quality luxury boats and hospitality Conditions of use and disclaimer Version: August 2018 B.V. Registered with the Chamber of Commerce under number: 34331505. Established at the Cruquiusweg 40 in
More informationMCHT-350 MAGNETIC CYLINDER HAND TRUCK INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More informationR20 - Fifth Wheel Hitch
You can take it with you. INSTRUCTION MANUAL R20 - Fifth Wheel Hitch Plymouth MI Product No. 30867 DEALER/INSTALLER: END USER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and
More informationSwingLift GB100 GAS BOTTLE CRANE
SwingLift GB100 GAS BOTTLE CRANE Operating and Maintenance Instructions Station Road Clowne Chesterfield Derbyshire S43 4AB Tel: 01246 811475 Fax: 01246 810403 E-mail: sales@pennyhydraulics.com Website:
More informationGEatom306KHF-5U Three-phase Grid-Tied Battery Inverter. Version 1.1. Global Mainstream Dynamic Energy Technology Ltd. 1
GEatom306KHF-5U Three-phase Grid-Tied Battery Inverter Version 1.1 Global Mainstream Dynamic Energy Technology Ltd. 1 Content Prelude... 4 1. Safety... 5 1.1 How to Use This Manual... 5 1.2 Safety Rules...
More informationInstructions for: FOLDING ENGINE CRANE PREMIER 2 TONNE. MODEL No: SPC2000
Instructions for: FOLDING ENGINE CRANE PREMIER 2 TONNE MODEL No: SPC2000 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More informationCE Operating and Maintenance Manual
CE Operating and Maintenance Manual Demolition and Sorting Grab Type S 450-D Zijtveld Grijpers The Netherlands www.zijtveld-grijpers.nl 1 Introduction Dear User, The Demolition/Selector grab is a piece
More informationBattery Charger Series EASY Charger
Battery Charger Series EASY Charger User s manual 1 Warranty RIPEnergy is not manufacturer of these units. All technical information s, data s and dimensions rely on information s given by the manufacturer.
More informationHoists & Rigging Products for Construction Projects
Manual Hoists Have a special application? Our full line of material handling products allows us to create complete solutions rather than just offering single products. Now you have one point of contact
More informationTOOL BOX TALK - SAFE USE OF LIFTING EQUIPMENT
TOOL BOX TALK - SAFE USE OF LIFTING EQUIPMENT Golden Rule 6 Mechanical Lifting Do not operate any lifting equipment unless It has been approved for use The lift has been assessed by a competent person
More informationInstallation, Operating & Maintenance Instructions. Series 081, DN (I.D. 2½" - 4") Hot surfaces; do not touch!
Vacuum Gate Valve This manual is valid for the valve ordering number(s): 08136-FA14/24/34/44 08138-FA14/24/34/44 08140-FA14/24/34/44 The fabrication number is indicated on each product as per the label
More informationOperators and Maintenance Manual. Display EEM MOT 01 FE02.02
1/16 Operators and Maintenance Manual Display EEM MOT 01 FE02.02 Rev. 01 December 2017 2/16 Table of Contents Introduction... 3 1. General information... 3 2. Handling in transport and storage... 4 3.
More informationOperator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and
Operator Manual This operator manual has information for all models of series B plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important
More informationBattery Charger. Series EASY Charger. User s manual
Battery Charger Series EASY Charger User s manual 1 Warranty RIPEnergy is not manufacturer of these units. All technical information s, data s and dimensions rely on information s given by the manufacturer.
More informationSingle Phase Floor Grinder
Single Phase Floor Grinder Operating Manual Kaladari Industries Australian Manufacturers of Quality Diamond Tools and Equipment 6 Adelaide Tce Tel: +61 8 8374 4680 St Marys 5042 Fax: +61 8 8374 4684 South
More information2000 lb Adjustable Gantry Crane
2000 lb Adjustable Gantry Crane Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationNew Bremen, Ohio USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A.
New Bremen, Ohio 45869 USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A. You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others
More informationCPM Technical Guide / Load Configuration. Load configuration for customers. Concrete Safety for Life
CPM Technical Guide / Load Configuration Load configuration for customers Concrete Safety for Life Technical Summary In order to assist our customers in their preparation for off-loading our products from
More informationPrime Attachments & Custom Fab Brush Mower Owners/Operators Manual
Prime Attachments & Custom Fab Brush Mower Owners/Operators Manual The operator is responsible for the safe operation and maintenance of the machine. It is important that anyone who uses the machine is
More informationAssembly and Maintenance Manual Type ASNU
Assembly and Maintenance Manual Type ASNU Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_ASNU.docx
More informationPh: Camlok. Lifting Clamps. Made in Britain - Safely used throughout the world.
Ph: 02 9631 8833 camlok@lbwireropes.com.au Camlok Made in Britain - Safely used throughout the world www.camlok.com.au Product Page Vertical Plate Clamps: Why a Camlok: The Advantages Explained 3 92 Series
More informationOVERHEAD CRANE SAFETY:
ERI Safety Videos DVDs, Digital Media & Custom Production 1313 OVERHEAD CRANE SAFETY: Safety Is In Your Hands Leader s Guide Safety Source Productions OVERHEAD CRANE SAFETY: Safety Is In Your Hands This
More informationInstallation, Operating & Maintenance Instructions. All-metal gate valve with compact or extended pneumatic actuator
Installation, Operating & Maintenance Instructions All-metal gate valve with compact or extended pneumatic actuator Series 48 DN 16 320 mm (I.D. ⅝" 12") This manual is valid for the following product ordering
More informationBlocks. your reliable partner
Blocks your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope- and
More informationReliance Industries, LLC. Installation, Operation, Inspection and Maintenance Instructions for the Slider Traveling Beam Anchor Clamp
Reliance Industries, LLC Installation, Operation, Inspection and Maintenance Instructions for the Slider Traveling Beam Anchor Clamp Model # 3096 Model # 3097 Model # 3104 Reliance Industries, LLC PO Box
More informationSTRUT SPRING COMPRESSOR
OWNER S MANUAL PRODUCT CODE: 1221T STRUT SPRING COMPRESSOR Capacity Stroke Spring Coil Spring Spring Coil Net Weight (Maximum) Thickness Length Diameter 1,000kg 330mm 10-18mm 210-570mm 100-158mm 36kg Made
More information1250 LB. CAPACITY MECHANICAL WHEEL DOLLY
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationIMPORTANT! DO NOT DISCARD
IMPORTANT! DO NOT DISCARD This document contains important preventative maintenance procedures that could help eliminate potential service issues and prolong the life of your G-Force unit. Please familiarize
More informationControl, Safe Use and Operation of Road-Rail Plant
Control, Safe Use and Operation of Page 1 of 13 Part A Synopsis A Standard detailing the requirements for the control, safe use and operation of road-rail plant in the railway environment. Approval and
More informationGreat Western Painting Crane Operator - Offshore CRANE OPERATOR - OFFSHORE
Crane Operator - Offshore CRANE OPERATOR - OFFSHORE Cranes, like all pieces of heavy equipment, if not properly operated, inspected and maintained have a potential for causing major bodily injury or property
More informationRigging - Offshore OFFSHORE CRANES API RP 2D Operation and Maintenance of Offshore Cranes
Clearheart Construction Co., Inc. Rigging - Offshore OFFSHORE CRANES API RP 2D Operation and Maintenance of Offshore Cranes Cranes, like all pieces of heavy equipment, if not properly operated, inspected
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
More information