Cordless Line Trimmer
|
|
- Lucas Fowler
- 5 years ago
- Views:
Transcription
1 RLT6X RLT6B ORIGINAL INSTRUCTIONS Cordless Line Trimmer
2 Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine. Subject to technical modification.
3 GENERAL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in Save all warnings and instruction for future reference. The term power tool in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) WORK AREA SAFETY Keep work area clean and well lit. Cluttered or dark Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks Keep children and bystanders away while operating a power tool. Distractions can cause you to lose ELECTRICAL SAFETY Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal Do not overreach. Keep proper footing and balance at all times. This enables better control of the power in Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a
4 BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with Use power tools only with specifically designated battery packs. Use of any other battery packs may When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This LAWN TRIMMER SAFETY WARNINGS Never allow children or people unfamiliar with the Keep bystanders, children and pets 5m away from the Never operate the product with damaged guards or Keep hands and feet away from the cutting means at Beware, the cutting elements continue to rotate after debris like small stones, gravel and other foreign Wires or string may become entangled with the cutting Switch off and remove battery pack before: servicing leaving the product unattended cleaning your product changing accessories checking for any damage if the product starts to vibrate abnormally performing maintenance Wear full eye and hearing protection while operating the Hearing protection may restrict the operators ability to hear warning sounds, pay particular attention to Secure long hair so it is above shoulder level to prevent The small blade fitted to the lawn guard is designed to trim the new extended line to the correct length for safe Always ensure that ventilation openings are kept clear Before use and after any impact, check that there are damaged should be properly repaired or replaced by an Make sure the cutting head attachment is properly Make sure all guards, deflectors and handles are Do not modify the machine in any way, this may WARNING Some regions have regulations that restrict the use of authority for advice TRANSPORTATION & STORAGE Stop the machine and allow it to cool before storing or batteries fitted, remove and secure separately cool dry and well-ventilated place that is inaccessible For transportation, secure the machine against MAINTENANCE WARNING Use only original manufacturer s replacement parts,
5 WARNING Servicing requires extreme care and knowledge product to your nearest authorized service center for For replacement line use only nylon filament line of the diameter described in the specification table of this After extending new cutter line, always return the Any part that is damaged should be properly repaired or Check all nuts, bolts and screws at frequent intervals for proper tightness to ensure the product is in safe INTENDED USE The product is designed for cutting grass, light weeds The cutting plane should be approximately parallel to the ground surface The product should not be used to cut or trim hedges, bushes or other vegetation where the cutting plane is not RESIDUAL RISK Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk operator should pay special attention to avoid the following: RISK REDUCTION It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud s Syndrome cold and dampness, diet, smoking and work practices are all thought to contribute to the development of the these operator to possibly reduce the effects of vibration: the unit wear gloves to keep the hands and wrists After each period of operation, exercise to increase If you experience any of the symptoms of this condition, immediately discontinue use and see your doctor about WARNING KNOW YOUR PRODUCT See page 7. Variable speed trigger Rear handle Lock-out trigger Front handle Curved shaft Grass deflector Line cut-off blade Cutting line Battery pack Battery latch button Charger Charger cable Spool cover Spool Eyelet SYMBOLS ON THE PRODUCT Safety alert Read and understand all instructions before operating the product, follow all Do not use metal blade(s) on the all bystanders a safe distance away from
6 Keep all bystanders, especially children and pets, at least 5m away from the Keep hands away from blades Waste electrical products should not Check with your local authority or retailer The following signal words and meanings are intended to explain the levels of risk associated with this product: DANGER Indicates an imminently hazardous situation, which, if WARNING Indicates a potentially hazardous situation, which, if not CAUTION Indicates a potentially hazardous situation, which, if not CAUTION Without safety alert symbol SYMBOLS IN THIS MANUAL Parts or accessories sold separately Waste electrical products should not Note Warning 4
7 RLT6X x x x x x x x x x x x 5
8 RLT6B x x x x x x x x x 6
9
10
11
12 p. p.4 p.6 p.7 p.8 0
13
14
15
16 4 4
17 5 6 5
18 6
19 7
20 04089v 8
21 PRODUCT SPECIFICATIONS Model RLT6X RLT6B Rated Voltage DC 6 Volts Maximum no-load speed 6,500 min - Cutting line diameter Cutting capacity Weight without battery pack 0 mm kg BATTERY AND CHARGER Model RLT6X RLT6B Battery pack BPL66 Not included Weight - Charger BCL60 - Compatible battery packs BPL650D REPLACEMENT PART Complete spool RAC07
22 Imported by: Techtronic Industries (Australia) Pty. Ltd. Level, 660 Doncaster Road Doncaster, VIC 08, Australia Techtronic Industries New Zealand Ltd. 8-6 Amelia Earhart Avenue Mangere, Auckland 0, New Zealand
RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner
RPS5 ORIGINAL INSTRUCTIONS Cordless Pruner Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.
More informationR18DDBL ORIGINAL INSTRUCTIONS. 18V Brushless Drill Driver
R18DDBL ORIGINAL INSTRUCTIONS 18V Brushless Drill Driver Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical
More informationRMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool
RMT1201 ORIGINAL INSTRUCTIONS Cordless Multi-Tool Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL
More informationoriginal instructions 18V Torch RFP1801
original instructions 18V Torch RFP1801 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL POWER
More informationOPERATOR'S MANUAL. Cat. No. C12 PC. To reduce the risk of injury, user must read and understand operator's manual.
OPERATOR'S MANUAL Cat. No. C12 PC M12 Cordless Copper Tubing Cutter To reduce the risk of injury, user must read and understand operator's manual. General POWER TOOL SAFETY WARNINGS WARNING Read all safety
More informationeclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #:
eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com Test Equipment Depot - 800.517.8431-99
More information4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL
CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When
More informationWR 22SE WR 25SE WR25SE. Handling instructions
WR 22SE WR 25SE WR25SE Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
More informationRLM36X46L50HI RLM36X46L40 RLM36B46L ORIGINAL INSTRUCTIONS. Cordless Lawn Mower
RLM36X46L50HI RLM36X46L40 RLM36B46L ORIGINAL INSTRUCTIONS Cordless Lawn Mower Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining this
More informationRLM36X40H25 ORIGINAL INSTRUCTIONS. Cordless Lawn Mower
RLM6X40H5 ORIGINAL INSTRUCTIONS Cordless Lawn Mower Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining this machine. Subject to technical
More informationSAFETY AND OPERATING MANUAL. Lithium-Ion cordless hammer drill WX372 WX372.1 WX372.9
SAFETY AND OPERATING MANUAL 2 Original Instructions General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationIt is essential that you read the instructions in this manual before assembling, operating, and maintaining the product.
AHT185B AHT185BS6 Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications. FRONT HANDLE FRONT
More informationInstruction Manual. CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION. Model SROM 1172
Instruction Manual CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION Model SROM 1172 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Product Features: 1. Keyless
More informationCat. No. M18 Cordless multi-tool. To reduce The risk of injury, user must read and understand operator's manual.
OPERATOR'S MANUAL Cat. No. M18 Cordless multi-tool To reduce The risk of injury, user must read and understand operator's manual. 2 General POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and
More informationInstruction Manual 4.0V Li-Ion Screwdriver. Part #: ECLIPSE ENTERPRISES, INC Chula Road, Amelia Court House, VA 23002, U.S.
Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 ECLIPSE ENTERPRISES, INC. 13302 Chula Road, Amelia Court House, VA 23002, U.S.A 2 3 Intended use Your ECLIPSE ENTERPRISES, INC. 902-588 screwdriver
More informationInstruction Manual CORDLESS DRILL & DRIVER 18V. Model SROM 1170
Instruction Manual CORDLESS DRILL & DRIVER 18V Model SROM 1170 Product Features: Dear Valued Customer, Thank you for purchasing this Samson Power Tool. We are dedicated to providing quality Samson Power
More informationWR 16SE. de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru. Handling instructions
en WR 16SE de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to
More informationSAFETY AND OPERATING MANUAL. Cordless Hedge Trimmer WG259E WG259E.5 WG259E.9
SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 9 5 8 7 6 A2 A1 1 2 B1 A3 3 2 1 C1 B2 2 3 1 C2 C3 C2 C3 D E F G -- -- -- = 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 7 6 2 5 4 2 3 A1 A2 1 2 A3 B A3 B C1 C2 3 C3 D 1. FORWARD/ REVERSE ROTATION CONTROL 2. SOFT GRIP HANDLE 3. BATTERY PACK RELEASE BUTTON 4. BATTERY PACK*
More informationSAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS
SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 9 8 5 6 7 A1 A2 1 2 1 3 2 A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 C2 C3 D F E 1. KEYLESS CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE
More informationCordless Hedge Trimmer Taille-haies sans fil Cortasetos Inalámbrico EN F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280.
Taille-haies sans fil Cortasetos Inalámbrico F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280.9 2 5 3 6 4 7 1 8 9 A B1 1 2 1 3 B2 C C B2 1 2 D1 D2 D3 E 1. BATTERY PACK* 2. REAR HANDLE
More informationSSW 18 LTX 600 SSW 18 LTX 400 BL
SSW 18 LTX 600 SSW 18 LTX 400 BL en Operating Instructions 5 fr Mode d'emploi 9 es Instrucciones de manejo 13 www.metabo.com SSW 18 LTX 400 BL 1 SSW 18 LTX 600 1 2 3 2 3 4 5 7 4 7 6 6 9 8 9 8 10 2 11.
More informationTOOLPRO 18V Li-Ion Brushless Impact wrench
TOOLPRO 18V Li-Ion Brushless Impact wrench Instruction Manual CIW180HB.9 After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 8 9 5 7 6 A1 A2 1 2 1 3 2 A3 B1 A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 D E1 1-18 D E1 E2 E3 F 1-18 6 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR
More information18V CORDLESS DRILL DRIVER CDT16180
18V CORDLESS DRILL DRIVER CDT16180 LX400 SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
More informationELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
More information1200W CaR PoliSheR en RS4900
1200W Car Polisher RS4900 RS4900 8 1 2 7 3 4 5 6 A B flat nozzle C D E F 1200W Car Polisher RS4900 G H flat nozzle I J K L 4 1200W Car Polisher COMPONT LIST 1 2 3 4 5 6 7 Variable speed control Switch
More informationW6VB3 W8VB2. Handling instructions
Screw Driver Model W 6VM W 6V4 W 6VA4 W 6VB3 W 8VB2 Handling instructions W6VM W6V4 W6VA4 W6VB3 W8VB2 Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to
More informationTOOLPRO 18V 2 Speed Drill Driver
TOOLPRO 18V 2 Speed Drill Driver Instruction Manual CDT218G.1 After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before operating
More informationSAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS
SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS LITHIUM-ION BRUSHLESS DRILL DRIVER LITHIUM-ION BRUSHLESS HAMMER DRILL WU175 WU175.1 WU309 1 2 3 4 10 5 9 8 6 7 12 11 100% A1 A2 0% 1 2 A3 A4 B1 B2 2 C1
More information20V Cordless Shrub Shear & Grass Shear P02 P10 P15 WG801 WG801.9
P02 P0 P5 WG80 WG80.9 2 WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth
More informationELECTRIC CAR POLISHER
ELECTRIC CAR POLISHER MODEL NO: CP254 PART NO: 6462108 OPERATION & MAINTENANCE INSTRUCTIONS LS0610 INTRODUCTION Thank you for purchasing this CLARKE electric car polisher. Before attempting to use this
More informationR18IW7. ORIGINAL INSTRUCTIONS 18V Brushless Impact Wrench
R18IW7 ORIGINAL INSTRUCTIONS 18V Brushless Impact Wrench Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical
More informationGTC650L-XE Australia New Zealand
www.blackanddecker.com.au GTC650L-XE Australia New Zealand 2 11 D1 D2 D3 D4 3 ENGLISH (Original instructions) Intended use Your Black & Decker hedgetrimmer has been designed for trimming hedges, shrubs
More informationINSTRUCTION MANUAL. Cordless Angle Drill XAD01
INSTRUCTION MANUAL Cordless Angle Drill XAD0 0474 ENGLISH (Original instructions) SPECIFICATIONS Model XAD0 Capacities Steel 0 mm (3/8") Wood 25 mm (") No load speed (RPM) 0 -,800 /min Overall length 34
More informationWHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com.
WHAT S IN THE BOX METAL CUTTING SHEARS 500W INSTRUCTION MANUAL SPECIFICATIONS Motor: No load speed: Max. Thickness: Tool weight: 500W 0 1,600 rpm 1.2mm 2.2kg Metal Cutting Shears Hex Key ozito.com.au MCS-5000
More informationRD V RECIPRO/PRUNING SAW
RD2865 RD2865 7 1 6 2 3 5 4 8 9 RD2865 1 A B C 2 7 1 2 D E F1 F2 COMPONT LIST 1 2 3 4 5 6 7 8 9 TOOL-FREE BLADE CLAMP LEVER LOCK-OFF BUTTON HANDLE BATTERY PACK * BATTERY PACK RELEASE LATCH ON/OFF SWITCH
More informationPower Paint Scraper 200W CPS-200. To view the full range visit: Instruction Manual 3 Year Replacement Warranty
Power Paint Scraper 200W Instruction Manual 3 Year Replacement Warranty CPS-200 WARNING! Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric
More informationOPERATOR'S MANUAL M12 FIR38, M12 FIR12 M12 FUEL RATCHETS WARNING. Cat. No.
OPERATOR'S MANUAL Cat. No. M12 FIR38, M12 FIR12 M12 FUEL RATCHETS WARNING To reduce the risk of injury, user must read and understand operator's manual. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read
More informationOPERATOR'S MANUAL WARNING. Cat. No. M18 FMTIWP12, M18 FMTIWF12 M18 FUEL MID-TORQUE IMPACT WRENCHES
OPERATOR'S MANUAL Cat. No. M18 FMTIWP12, M18 FMTIWF12 M18 FUEL MID-TORQUE IMPACT WRENCHES WARNING To reduce the risk of injury, user must read and understand operator's manual. GENERAL POWER TOOL SAFETY
More information40 V HEDGE TRIMMER ATTACH YOUR RECEIPT HERE
ITEM #0796788 40 V HEDGE TRIMMER MODEL #KHT 240-07 Español p. 17 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer
More information12V CORDLESS DRILL DRIVER. Model HY2150. User Manual
12V CORDLESS DRILL DRIVER Model HY2150 User Manual CONTENTS Section Description Page N o /N o s 1. OWNER S MANUAL & SAFETY INSTRUCTIONS 3 2. GENERAL SAFETY 3 5 3. BATTERY PACK 5 6 4. CHARGING 6 5. INSERTING/REMOVING
More informationPT-1441 Cordless Drill Driver 14.4V User s Manual
PT-1441 Cordless Drill Driver 14.4V User s Manual 1 st Edition, 2009 2009 Copy Right by Prokit s Industrial Co., Ltd. Please read this handbook carefully before using the tool General Safety Rules WARNING
More informationOPERATOR'S MANUAL M12 FID M12 FUEL 1/4" HEX IMPACT DRIVER WARNING. Cat. No.
OPERATOR'S MANUAL Cat. No. M12 FID M12 FUEL 1/4" HEX IMPACT DRIVER WARNING To reduce the risk of injury, user must read and understand operator's manual. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read
More informationCordless Driver Drill
INSTRUCTION MANUAL Cordless Driver Drill MT064 MT065 003947 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT064 MT065 Steel 0 mm 3 mm Capacities Wood 25 mm 28 mm Wood
More informationSAFETY AND OPERATING MANUAL. 3 in 1 Grass Trimmer/Edger WG160E.5
SAFETY AND OPERATING MANUAL 3 in 1 Grass Trimmer/Edger WG160E.5 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions
More informationPower Carver 50W CPC-050. To view the full range visit: Instruction Manual 3 Year Replacement Warranty
Power Carver 50W Instruction Manual 3 Year Replacement Warranty CPC-050 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
More informationCORDLESS GRASS TRIMMER & SHEAR
WHAT S IN THE BOX Cordless Grass Trimmer / Shear CORDLESS GRASS TRIMMER & SHEAR Hedge Trimmer Blade Grass Shear Blade INSTRUCTION MANUAL SPECIFICATIONS Voltage: 18V No Load Speed: 1,200/min Hedge Trimmer:
More informationCordless Driver Drill
INSTRUCTION MANUAL Cordless Driver Drill FD0 008796 ENGLISH (Original instructions) SPECIFICATIONS Model FD0 Steel 0 mm (3/8") Capacities Wood 2 mm (3/6") Wood screw 5. mm x 63 mm (7/32" X 2-/2") Machine
More informationCORDLESS GLUE GUN. 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au GGL-7000 WHAT S IN THE BOX. Cordless Glue Gun.
WHAT S IN THE BOX CORDLESS GLUE GUN 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Input: 7.2V Glue Stick Diameter: 7.2mm Glue Stick Length: 190mm Heating Time: 15sec Working Time: 45min Battery Power:
More informationMULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX MSW Multi-purpose Saw. Blades x 3.
WHAT S IN THE BOX MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS Input: Voltage: No Load Speed: Stroke Length: Blade Fitment: Cutting Capacity: Weight: ozito.com.au 500W 230-240V ~ 50Hz 500-3000
More informationSFC 18 A SFC 22 A English
SFC 18 A SFC 22 A English en 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a is a prerequisite for safe, trouble-free
More informationCordless Driver Drill
ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 607D 637D 6337D 6347D 0089 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 607D 637D 6337D 6347D
More informationCORDLESS BLOWER KIT INSTRUCTION MANUAL
WHAT S IN THE BOX Cordless Blower CORDLESS BLOWER KIT INSTRUCTION MANUAL 4.0Ah Battery & Fast Charger SPECIFICATIONS Voltage: 18V Battery: 4.0Ah Li-ion Charge Time: 80 min No Load Speed: 12,000/min Max.
More informationOPERATOR'S MANUAL M18 HKP M18 6-TON KNOCKOUT TOOL WARNING. Cat. No. To reduce the risk of injury, user must read and understand operator's manual.
OPERATOR'S MANUAL Cat. No. M18 HKP M18 6-TON KNOCKOUT TOOL WARNING To reduce the risk of injury, user must read and understand operator's manual. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety
More informationCORDLESS HEDGE TRIMMER KIT INSTRUCTION MANUAL
WHAT S IN THE BOX Cordless Hedge Trimmer CORDLESS HEDGE TRIMMER KIT INSTRUCTION MANUAL SPECIFICATIONS Voltage: 18V Battery: 2.0Ah Li-ion Charge Time: 2.5Hrs No Load Speed: 2,200/min Max. Cutting Capacity:
More information360 LINE LASER LEVEL. 20m Working Range WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LLT-3605 WHAT S IN THE BOX
WHAT S IN THE BOX 360 LINE LASER LEVEL 20m Working Range INSTRUCTION MANUAL SPECIFICATIONS Battery: Laser Power: Working Range: Laser Diode: Accuracy: 6V DC (4 x AA Battery) Class 2,
More informationCordless Driver Drill
ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 670D 680D 6390D R 0056 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 670D 680D 6390D Steel
More informationSAFETY AND OPERATING MANUAL. Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.4
SAFETY AND OPERATING MANUAL Original instructions 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationRBL1851S OBL1820S. ORIGINAL INSTRUCTIONS Cordless Blower
RBL85S OBL80S ORIGINAL INSTRUCTIONS Cordless Blower Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical
More informationBENCH GRINDER MODEL NO. OZBG150WA
BENCH GRINDER 150mm MODEL NO. OZBG150WA OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS MODEL NO. OZBG150WA Input Power: 150W Input Voltage: 230V ~ 50Hz No Load Speed:
More informationCORDLESS TORCH LIGHT. 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PXTLS-900 WHAT S IN THE BOX. Torch Light
WHAT S IN THE BOX CORDLESS TORCH LIGHT 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Input: 18V Number of LEDs: 1 Brightness: 250 Lumen Weight: 0.2kg ozito.com.au Torch Light Battery & Charger sold
More informationHDE 500-A22. English. Printed: Doc-Nr: PUB / / 000 / 03
HDE 500-A22 English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and
More informationCORDLESS LED TORCH INSTRUCTION MANUAL
WHAT S IN THE BOX CORDLESS LED TORCH INSTRUCTION MANUAL LED Torch SPECIFICATIONS Input: 18V Number of LEDs: 1 Cree LED 3W Brightness: 250 Lumen Weight: 0.2kg ozito.com.au Battery & Charger sold separately
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
More information2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos Part Nos. CRIL/COB/BL CRIL/COB/OR CRIL/COB/GR CRIL/COB/YW
INSTRUCTIONS FOR 2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos.82679 Part Nos. CRIL/COB/BL 82684 CRIL/COB/OR 82685 CRIL/COB/GR 82688 CRIL/COB/YW IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY
More informationCORDLESS BLOWER. 36V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au BLL- 036 WHAT S IN THE BOX. Blower. Blower Tube.
WHAT S IN THE BOX CORDLESS BLOWER 36V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Voltage: 36V Battery: 3.0Ah Li-ion Charge Time: 3 Hours No Load Speed: 10,000-16,000/min Max. Air Speed: 252km/hr Weight
More informationBelt Sander JCB-BS950
Safety and operating manual Belt Sander JCB-BS950 ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions
More information4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT
SKU 241-1394 4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT Operation Manual WARNING! Please read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS
More informationCORDLESS BLOWER KIT. 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PXCBLK-018 WHAT S IN THE BOX. Cordless Blower.
WHAT S IN THE BOX CORDLESS BLOWER KIT 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Voltage: Battery: Charge Time: No Load Speed: Max. Air Speed: Weight: ozito.com.au 18V 1.5Ah Li-ion 2 Hours 12,000/min
More informationAustralia
www.blackanddecker.com.au 2 5 3 1 4 WP1500K-XE Australia New Zealand Intended use Your Black & Decker sander has been designed for sanding and polishing wood, metal, plastics and painted surfaces. This
More information18V CORDLESS DRILL MODEL NO: CON18LiC
18V CORDLESS DRILL MODEL NO: CON18LiC PART NO: 6479531 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 - ISS 2 INTRODUCTION Thank you for purchasing this CLARKE Cordless Drill. Before
More information3.6V SCREWDRIVER INSTRUCTION MANUAL CSD36F
3.6V SCREWDRIVER INSTRUCTION MANUAL CSD36F ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions
More information7.2V Cordless Grass Shear/Shrub
7.2V Cordless Grass Shear/Shrub 1600002 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.greenworkstools.com Read all safety rules and instructions carefully before operating this tool.
More information24V CORDLESS HAMMER DRILL
24V CORDLESS HAMMER DRILL CDI224MN ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationSBC12 H Operating instructions Mode d emploi Manual de instrucciones
*254901* 254901 SBC12 H Operating instructions Mode d emploi Manual de instrucciones Safety Precautions Read all Instructions GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING! Read and understand
More informationRegister at
12in Cordless Trimmer Form No. 3371-411 Rev D Model No. 51486 Serial No. 312000001 and Up Operator's Manual Register at www.toro.com If you have questions or problems, contact us at www.toro.com or call
More information40V LITHIUM-ION CORDLESS HEDGE TRIMMER
40V LITHIUM-ION CORDLESS HEDGE TRIMMER 22332 Some Greenworks Lithium-Ion products are sold with or without battery and charger. To order: Battery (Sold Separately) (2Ah Model # 29462 / 4Ah Model # 29472)
More informationCordless Impact Wrench
ENGLISH INSTRUCTION MANUAL Cordless Impact Wrench BTW0 00534 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH SPECIFICATIONS Capacities
More informationSAFETY AND OPERATING MANUAL. Cordless Lawn Trimmer Lawn Edge Trimmer WG168E
SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
More informationG-24V LITHIUM-ION CORDLESS HEDGE TRIMMER
G-24V LITHIUM-ION CORDLESS HEDGE TRIMMER 2200302 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.greenworkstools.com Read all safety rules and instructions carefully before operating
More informationRLM1836H40 OLM1836H. ORIGINAL INSTRUCTIONS Cordless Lawn Mower
RLM836H40 OLM836H ORIGINAL INSTRUCTIONS Cordless Lawn Mower Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to
More informationDisc Grinder Model G 18SCY G 18SEY G 18UBY G 23SCY G 23SEY G 23UBY
Disc Grinder Model G 18SCY G 18SEY G 18UBY G 23SCY G 23SEY G 23UBY Handling instructions G23SEY NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure
More informationCordless Blower. 18 Volt OZCBL18VA. To view the full range visit: Operation Manual 2 Year Replacement Warranty
Cordless Blower 18 Volt Operation Manual 2 Year Replacement Warranty OZCBL18VA 1008 To view the full range visit: www.ozito.com.au SPECIFICATIONS - MODEL NO. OZCBL18VA Batteries: Charge time: No load speed:
More informationCordless Driver Drill
INSTRUCTION MANUAL Cordless Driver Drill XFD0 0360 ENGLISH (Original instructions) SPECIFICATIONS Model XFD0 Steel 3 mm (/") Capacities Wood 38 mm (-/") Wood screw 0 mm x 89 mm (3/8" X 3-/") Machine screw
More informationRAG80125 ORIGINAL INSTRUCTIONS. Angle Grinder
RAG805 ORIGINAL INSTRUCTIONS Angle Grinder Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
More informationKNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS BLOWER (PXCBLK-018) 1. Blow Tube 2. Blow Tube Release Tab 4. Trigger Switch 5. Battery Seating 3. Handl
WHAT S IN THE BOX Cordless Blower CORDLESS BLOWER INSTRUCTION MANUAL SPECIFICATIONS Voltage: 18V Battery: 4.0Ah Li-ion Charge Time: 80 min No Load Speed: 12,000/min Max. Air Speed: 210km/hr Weight: 2.0kg
More informationSAFETY AND OPERATING MANUAL. 3 in 1 Grass Trimmer/Edger WG169E WG169E.5 WG169E.9
SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
More informationBENCH GRINDER MODEL NO: CBG6250
CBG6250 Bench Grinder.fm Page 1 Thursday, November 10, 2011 3:26 PM BENCH GRINDER MODEL NO: CBG6250 PART NO: 6500522 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 CBG6250 Bench Grinder.fm Page 2 Thursday,
More informationCordless Impact Driver
ENGLISH: Original instructions INSTRUCTION MANUAL Cordless Impact Driver TD0D Read before use. SPECIFICATIONS Model: TD0D Fastening capacities Machine screw 4 mm - 8 mm Standard bolt High tensile bolt
More informationSPECIFICATIONS MODEL NO. OZBG150WA
SPECIFICATIONS MODEL NO. OZBG150WA Input Power: 150W Input Voltage: 230V ~ 50Hz No Load Speed: 2950/min Wheel Diameter: 150mm (6 ) Wheel Thickness: 16mm Wheel Bore: 12.7mm Protection Class: 1 (earthed
More information18V Lithium-ion Cordless Grass Trimmer
Qualcast 18V Lithium-ion Cordless Grass Trimmer Instruction Manual After Sales Support UK/Ireland 0845 077 8888 Republic of Ireland 0124 77708 Web www.homebasespares.co.uk Important - Please read these
More informationCORDLESS AIR PUMP. 12V Li-ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LAP-4100 WHAT S IN THE BOX. Cordless Air Pump.
WHAT S IN THE BOX CORDLESS AIR PUMP 12V Li-ion INSTRUCTION MANUAL SPECIFICATIONS Input: Max Air Pressure: Flow Rate: Battery: Charge time: Weight with Battery: ozito.com.au 12V 160psi 14l/min 1.3Ah Li-ion
More informationOWNER S TECHNICAL MANUAL
OWNER S TECHNICAL MANUAL 18V Cordless Grease Gun 450g 670AN3 Description These model guns are designed to dispense petroleum-based greases (up to NLGI 2) for general lubrication applications. A 36-inch
More informationPLANER 400W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX. Planer. Guide Fence. Spanner. Input Power: Planing Width:
WHAT S IN THE BOX PLANER 400W INSTRUCTION MANUAL SPECIFICATIONS Input Power: No Load Speed: Planing Width: Blade Type: Planing Depth: Rebate Depth: Weight: ozito.com.au 400W 16,000 / min 82mm HSS Blades
More informationSFC 14 A SFC 22 A English
SFC 14 A SFC 22 A English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling
More informationDrill Driver. Cordless 18V. Operating Instructions XDD-180. XU1 Power tools
Cordless Operating Instructions XDD-180 18V Drill Driver XU1 Power tools 1 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.xuone.com.au XDD-180 0916 1 2 3 4 5
More informationPowerPlex 14in 40V MAX String Trimmer
Form No. 3417-958 Rev C PowerPlex 14in 40V MAX String Trimmer Model No. 51482 Serial No. 318000001 and Up Model No. 51482T Serial No. 318000001 and Up Register at www.toro.com. Original Instructions (EN)
More informationE-DRIV MD-Series DC Torque Control System Calibration Procedure
Revision: 1.1 July 05, 2017 E-DRIV MD-Series DC Torque Control System Calibration Procedure www.mountztorque.com 1080 N 11 th St - San Jose CA 95112-408.292.2214 1 GENERAL SAFETY RULES WARNING! Read and
More information