Secoroc Rock Drilling Tools SECOROC MAGNUM SR AND TC EQUIPMENT. For bench drilling
|
|
- Simon Ford
- 5 years ago
- Views:
Transcription
1 Secoroc Rock Drilling Tools SECOROC MAGNUM SR AND TC EQUIPMENT For bench drilling
2 SECOROC MAGNUM SR AND SECOROC TC breaking the surface Since the advent of Secoroc Magnum SR35, this range of patented threaded drill systems have expanded with new applications. Now, two Magnum SR and one TC can be found above ground working on construction and bench drilling. More material where it s needed Thanks to these patented conical threaded systems, we re confident that rod breakage is a problem you will see a lot less of. Because there is more material at the rod end - hence the distinctive conical shape - we ve successfully strengthened the product, while minimizing any tendency to deviate during collaring. The result? Straighter holes and a much longer service life. The common denominator for both systems is that they offer thicker and stronger rods with the same bit diameters as the equivalent R or T threaded system. The result is less downtime, straighter holes and better productivity. And as an extra bonus, rods and bits are much easier to couple and uncouple. 2
3 Made to match the FlexiRoc drilling rigs The FlexiRoc T15 and T20 are a range of remote controlled tophammer drilling rigs that regularly operate on construction and bench drilling sites. They needed to find new and appropriate drillstring solutions to match and found it in the Magnum SR28, Magnum SR32 and the TC35. This group of drill strings cover holes from 33 mm to 64 mm and offer unique drilling qualities. Secoroc TC35 Fits the FlexiRoc T20 The TC35 matches the FlexiRoc T20 perfectly, working on construction or bench drilling sites. Replacing the R32 system, this mm diameter drill system is quite an all rounder. Despite being more robust than the R32, the TC35 still offers an equivalent range of drill sizes, though this time, with minimal bending tendency and maximal longevity. And thanks to this trapezoidal conical system, the TC35 can use 51 mm extension drilling equipment such as round Speedrods and retrac button bits. They are ideal in urban housing areas, for example, where stringent restrictions on vibration and noise have been set. Quite simply, the combination of TC35 and 51mm extension equipment means faster drilling, larger blast areas and minimal disturbance to the surroundings. Magnum SR32 Ideal for FlexiRoc T15 The FlexiRoc T15, a size smaller than the T20, is ideal for those tight urban construction sites. Here, the Magnum SR32 can drill holes from mm using hexagonal or round Speedrods and a choice of three button bits designs. In fact, SR32 drill rods are stronger and thicker that the equivalent R28 drills. Magnum SR28 Extension or shank end rods The Magnum SR28, the smallest of these three models, has a hole range from mm in diameter using shank end rods or single pass Speedrods. If you prefer extension rod systems then you can drill holes as small as mm by using hexagonal Speedrods. There is also a choice of the five drill bits designs four button bits and one cross type enabling FlexiRoc T15 to operate productively in difficult areas. Even though the R25 drill system offers the same size of drill holes, the Magnum SR28 offers more with its conical threads, its robust rods and long service life. 3
4 SR28 (1 1 8") Magnum SR28 thread system 33 % more material means a substantial increase in metal fatigue resistance 28 mm (1 1 8") diameter thread 25 mm (1") diameter thread Conical shaped rope thread facilitates rapid coupling and uncoupling More material between skirt and bit head Magnum SR28 drill string Shank end rod Button bit Shank adapter Hex. Speedrod Cross-type bit Dome reaming bit Drill bits xxx-27-5xxx xxx-41 Cross-type bit Buttons button meter No. of Buttons angle hole Product No. Product code diameter (mm) approx. buttons mm inch Gauge Centre Gauge Centre Side Centre kg BUTTON BIT - Spherical buttons , , , , , ,4 38 1½ , , , , , ,9 4
5 SR28 (1 1 8") Buttons button meter No. of Buttons angle hole Product No. Product code diameter (mm) approx. buttons mm inch Gauge Centre Gauge Centre Side Centre kg BUTTON BIT - Ballistic buttons , , , ,4 38 1½ , , , , , ,7 CROSS-TYPE BIT , ,3 19, , , ,3 19, ,5 DOME BIT - Spherical buttons ,49-20* ,7 1 12, ,0 * For reaming, reversed flushing. Width (mm) Insert Height (mm) Speedrod SR28 (1 1 8") Hex. 25 mm (1") SR28 (1 1 8") Fully carburized (C). D = 34 mm. Rod section 28,5 mm. hole diameter 8,6 mm. mm ength () foot Product No. Product code MF-C,02 12,1 Shank end rods Fully carburized. hole diameter 8,6 mm. ength () mm foot inch Product No. Product code Seal Product No. Seal Product code Shank hex. 25 mm (1") 108 mm (4¼"). 28 mm (1 1 8") thread " C,02 1, ' C, ,2 5
6 SR32 (1¼") Magnum SR32 thread system 30 % more material means a substantial increase in metal fatigue resistance 32 mm (1¼") diameter thread 28 mm (1 1 8") diameter thread Conical shaped rope thread facilitates rapid coupling and uncoupling More material between skirt and bit head Magnum SR32 drill string Shank adapter Round Speedrod Button bit 6
7 SR32 (1¼") Drill bits -5xxx xxx Buttons button meter Gauge No. of hole Product No. Product code diameter (mm) buttons buttons mm inch Gauge Centre angle Side Centre BUTTON BIT - Ballistic buttons 38 1½ , , , , , ,6 45 1¾ , , , ,9 Speedrods SR32 (1¼") Round 32 mm (1¼") SR32 (1¼") Fully carburized (C). D = 38 mm. hole diameter 11,7 mm. mm ength () foot inch Product No. Product code ' MF-C,02 11, '1 5 8" MF-C,02 18,5 7
8 TC35 (1 3 8") TC35 thread system 30 % more material means a substantial increase in metal fatigue resistance 35 mm (1 3 8") diameter thread 32 mm (1¼") diameter thread Conical shaped T-thread facilitates rapid coupling and uncoupling More material between skirt and bit head TC35 drill string Shank adapter Round Speedrod Button bit Retrac button bit 8
9 TC35 (1 3 8") Drill bits xxx Buttons button meter Gauge No. of hole Product No. Product code diameter (mm) buttons buttons mm inch Gauge Centre angle Side Centre approx. kg BUTTON BIT - Ballistic buttons / , , , , / , , 1x , / , x11 3x , / , x11 3x , / , x10 4x10, 1x ,0 Speedrods TC35 (1 3 8") Round 39 mm ( ") TC35 (1 3 8") Fully carburized (C). D = 46 mm. hole diameter 14,5 mm. mm ength () foot Product No. Product code MF-C,02 19, MF-C,02 24, MF-C,02 29, MF-C,02 34,6 9
10 Shank adapters Atlas Copco COP 1028 Ø33 55 ength () mm SR28 (1 1 8") , ,7 SR32 (1¼") , ,8 Atlas Copco COP 1032 Ø54 58,5 ength () mm TC35 (1 3 8") , ,9 Atlas Copco COP 1036, COP 1038, COP 1238 Ø54 74 ength () mm TC35 (1 3 8") , ,4 Atlas Copco COP 1132 Ø38 79 ength () mm SR32 (1¼") , ,5 TC35 (1 3 8") , ,5 Atlas Copco COP 1132 Ø38 79 ength () mm SR28 (1 1 8") , ,8 SR32 (1¼") , ,0 TC35 (1 3 8") , ,0 Atlas Copco COP 1140 Ø38 79 ength () mm SR32 (1¼") , ,5 TC35 (1 3 8") , ,6 10
11 Shank adapters Atlas Copco COP 1240, COP 1640 Ø54 124,5 ength () mm TC35 (1 3 8") , ,4 Atlas Copco COP 1440, COP 1550, COP 1838 Ø54 84,5 ength () mm TC35 (1 3 8") , ,8 Atlas Copco COP 1838 Ø54 84,5 ength () mm TC35 (1 3 8") , ,2 11
12 We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call - Sustainable Productivity. Atlas Copco Secoroc AB Box 521, SE Fagersta, Sweden Phone: Subjected to alterations without prior notice. Atlas Copco Secoroc AB. All rights reserved
Secoroc Rock Drilling Tools Tapered equipment
Secoroc Rock Drilling Tools Tapered equipment The lowest cost per metre drilled is now lower than ever The lowest cost per metre drilled has long been synonymous with Secoroc products. Our Uppercut tapered
More informationSecoroc Rock Drilling Tools COP 66 DTH HAMMER. Taking blasthole drilling to a new dimension
Secoroc Rock Drilling Tools COP 66 DTH HAMMER Taking blasthole drilling to a new dimension THE COP 66: FASTER, LIGHTER, SHORTER and built on success The new COP 66 and its new platform design represent
More informationTOP HAMMER DRILLING TOOLS. Percussive Products
TOP HAMMER DRILLING TOOLS Percussive Products 2 TABLE OF CONTENTS HARD ROCK TOOLING OVERVIEW 5 Bit Types 6 Bit Face Designs 8 Button Types 9 Blade Bit Designs 10 Reaming Tooling Designs 11 Rod Types 12
More informationdevelopment for Targeted operations. This way! Sandvik Alpha 330
The latest development for Targeted operations. This way! The All-New Sandvik 330 The 330 goes from strength to strength HEX 35 Today s rock drills generate almost unlimited impact power. We need to control
More informationDown-the-hole drill strings
Secoroc Rock Drilling Tools Down-the-hole drill strings Secoroc high quality DTH drill string equipment for Atlas Copco waterwell drill rigs: T2W, T3W, T3WDH, TH60, TH60DH T4W, T4WDH Atlas Copco waterwell
More informationAtlas Copco Geotechnical Engineering Products. Pipe roofing solutions
Atlas Copco Geotechnical Engineering Products Pipe roofing solutions Pipe roofing solutions pre-support in tunnel constructions Cities and urban areas around the world are continuously being modernized
More informationBOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2.
BOOMER M-SERIES Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2. RELOADED TO MEET YOUR CONDITIONS THE BOOMER M-SERIES FACE DRILLING RIGS HAVE BECOME A KEY PIECE
More informationT50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6
powerroc T50 Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: 102 152mm / 4 6 trustful performer with striking efficiency Everything about
More informationROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
More informationBOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
More informationBOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m²
BOOMER E1/E2 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² FOR POWER AND PRODUCTIVITY THE BOOMER E1 AND BOOMER E2 RIGS HAVE EXTENSIVE COVERAGE
More informationBOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
More informationFlexiROC T20 R A drill rig for surface- and underground construction
FlexiROC T20 R A drill rig for surface- and underground construction Hole diameter: 38 64 mm (1.5 2.5 ) Multi-purpose without compromise The FlexiROC T20 R (MK II) is the construction contractor s new
More informationBOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2
BOOMER T Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 PRIME PERFORMANCE PACKED INTO A SMALL, VERSITILE UNIT THE BOOMER T1 D IS AN IDEAL RIG FOR NARROW VEIN
More informationpowerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying.
powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. Hole diameter : 64 89mm (2 1/2 3 1/2 ) : 64 115mm (2 1/2 4 1/2 ) Power and performance Atlas Copco s
More informationFlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
More informationFlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction
FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction Folding boom hole diameter: 38 64 mm (1½ 2½ ) Improve your speed and accuracy The FlexiROC T25 R construction edition
More informationOverburden drilling catalogue
Atlas Copco Ground Engineering Products Overburden catalogue Symmetrix overburden systems Overburden Drilling Catalogue Atlas Copco Overburden Drilling System... 3 The Symmetrix System... 4 Drilling overburden...
More informationSIMBA MAIN BENEFITS. FOPS and ROPS approved cab for a safe and comfortable operator environment
SIMBA E7-SERIES Hydraulic long hole production drill rig for medium to large size drifts, with excellent cover area and flexibility. Hole range from 51 up to 127 mm. SIMBA PRODUCTION DRILLING IN MEDIUM
More informationFlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Pioneering productivity The FlexiROC T30 R quarry edition is a tophammer rig designed
More informationAtlas Copco Surface drill rig. ROC F7 Recommended hole range mm (3" 4 1 /2")
Atlas Copco Surface drill rig ROC F7 Recommended hole range 76 5 mm (3" /") Power and economy in perfect harmony Atlas Copco s ROC F7 surface crawler is an excellent example of company philosophy. A philosophy
More informationAtlas Copco Pneumatic Surface Drill Rig ROC 442PC. Tophammer Crawler Rig. Hole range mm (1 5 / / 2 )
Atlas Copco Pneumatic Surface Drill Rig ROC 442PC 3 8 Tophammer Crawler Rig Hole range 41 115 mm (1 5 / 8 4 1 / 2 ) ROC 442PC the Workmate A tophammer crawler rig for 41 115 mm (1 5 /8 4 1 /2 ) holes.
More informationBoomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²
Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein
More informationBoomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²
Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1 Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece
More informationGLOBAL PRODUCT CATALOGUE. January 2009 PERCUSSIVE TOOLING. THIS PAGE LEFT INTENTIONALLY BLANK
GLOBAL PRODUCT CATALOGUE THIS PAGE LEFT INTENTIONALLY BLANK PERCUSSIVE TOOLING January 2009 www.boartlongyear.com TABLE OF CONTENTS About Our Products 4 SAFETY 7 Overview 11 SYSTEM Set-up 12 bits 15 rods
More informationECM-720 CM-760D CM-780D
Setting The Pace Hydraulic Crawler Drills ECM-720 CM-760D CM-780D HOLE QUALITY PENETRATION RATE ACCESSORY LIFE COLLAR SOFT ROCK Strata-Sense Drill Automatics Optimization of drilling speed, hole straightness
More informationFlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 )
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 Hole diameter: 64 115 mm (2 1/2 4 1/2 ) FlexiROC T40 Hole diameter: 64 127 mm (2 ½ 5 ) Flexible rigs for all occasions
More informationFlexiROC T35 & T40 Surface drill rigs for quarrying and construction
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 hole diameter: 64 115 mm (2.5 4.5 ) FlexiROC T40 hole diameter: 64 127 mm (2.5 5 ) Flexible rigs for all occasions For
More informationBOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2
BOOMER S Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 w GROUND-BREAKING PRODUCTIVE DRILLING THE BOOMER S1 IS A FACE DRILLING RIG FOR MINING AND TUNNELLING.
More informationROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter
ROBBINS 53RH C Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter SMART IN THE UPS AND DOWNS OF DRILLING THE ROBBINS 53RH C IS A UNIQUE MULTIPURPOSE RAISE DRILL, ABLE TO
More informationQUALITY EXPERTISE COMMITMENT EXPERTISE YOU CAN DEPEND ON WWW.QUARRYMINING.COM USEFUL INFORMATION EXPERTISE. QUALITY. COMMITMENT. QUARRY MINING has been setting the industry standard for over 30 years in
More informationMustang geotechnical drilling rig
Atlas Copco Ground Engineering Products Mustang geotechnical drilling rig Mustang 4-F1 for geothermal drilling Mustang 4-F1 dedicated to geothermal drilling Geothermal heat pumps, or ground source heat
More informationRAISEBORING DRILL PIPES
Secoroc Rock Drilling Tools RAISEBORING DRILL PIPES Catalogue Introducing Raiseboring drill string components Atlas Copco Secoroc has a long history in Raiseboring that finds its roots in the Robbins Raiseboring
More informationFlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Extend your reach and versatility The FlexiROC T30 R Construction Edition is a tophammer
More informationROBBINS 73-SERIES. Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter
ROBBINS 73-SERIES Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter RAISEBORING SPECIALIST ROBBINS 73 RIGS ARE THE STURDIEST, MOST WIDELY SOLD RAISEBORING RIGS IN
More informationSERPENT. A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation.
SERPENT A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation. CONTROL THE AIR. CONTROL YOUR BUSINESS. THE SERPENT
More informationBoomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²
Boomer L2 Hydraulically controlled face drilling rig with a coverage area up to 104 m² 1 Fast and efficient face drilling The Boomer L2 is a powerful hydraulically controlled face drilling rig for mining
More informationSecoroc Rock Drilling Tools DTH equipment
Secoroc Rock Drilling Tools DTH equipment Product catalogue 770-483-0788 Contents Guide to product codes...5 7 Bit shanks... 8 Drill bits... 9 23 Hammers...24 27 Reverse circulation...28 29 Economy kits...30
More informationFLEXIROC T35,T40 SPEEDROC D30. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2
FLEXIROC T35,T40 Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 SPEEDROC D30 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone
More informationDRILLS. Down The Hole Button Bits
DRILLS Down The Hole Button Bits ECM Drills Down The Hole drilling equipment ECMining, the registered holder of ECMDrills, has sourced globally competitive and proven high quality Down The Hole (DTH) drilling
More informationMEYCO ME3. Concrete Spraying Mobile for medium sized tunnels
MEYCO ME3 Concrete Spraying Mobile for medium sized tunnels VERSATILE CONCRETE SPRAYING APPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE. MAIN BENEFITS
More informationSIMBA M6. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M6 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA HIGH PRECISION SOLUTION THE STURDY SIMBA M6 IS A LONG-HOLE PRODUCTION
More informationSIMBA M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA THE STURDY SIMBA M4 IS A LONG-HOLE PRODUCTION DRILL RIG FOR MEDIUM TO
More informationHydraulic breakers and drills. Powerful, lightweight and portable
Hydraulic breakers and drills Powerful, lightweight and portable The best power-to-weight Construction and rental companies around the world are discovering the advantages of using hydraulics. They know
More informationSmartROC C50 Surface drill rig for quarrying, mining and construction
SmartROC C50 Surface drill rig for quarrying, mining and construction Hole diameter: 90 140 mm (3.5 5.5") 1 Speed, power and precision The SmartROC C50 from Epiroc gives you the best of both worlds. The
More informationBoomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
Boomer E3/E4 series Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² 1 For power and productivity Face drill rigs in the Boomer E3 and E4 series have
More informationBoomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²
Boomer E1/E2 series Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² 1 For power and productivity The Boomer E1 and Boomer E2 rigs have extensive coverage
More informationMEYCO ME5. Mobile concrete spraying for large sized tunnels
MEYCO ME5 Mobile concrete spraying for large sized tunnels DEPENDABLE CONCRETE SPRAYING ACCURATE ECONOMICAL CONCRETE SPRAYER. BETTER THAN EVER Productivity heightened with improved pumping efficiency Accuracy
More informationFLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION FIELD
More informationSimba K102 production drill rig. Hydraulic production drill rig for long-hole mining
Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift
More informationBoomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity
More informationSecoroc G10/G10L Pneumatic Pick Hammer
Secoroc Rock Drilling Tools Secoroc Pneumatic Tools Secoroc G10/G10L Pneumatic Pick Hammer Operator's instructions / Spare parts list Foreword Thank you for selecting the Secoroc pick hammer G10/G10L.
More informationSecoroc Rock Drilling Tools LARGE DTH SOLUTIONS
Secoroc Rock Drilling Tools LARGE DTH SOLUTIONS secoroc Cluster drills The Cluster drill Range With the need for larger diameters in the foundations market worldwide we have adapted our Cluster drill packages
More informationFLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION YEARS OF
More informationEaser L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m
Easer L Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m Versatile Raiseboring rig Designed to drill opening holes in block cave, sub level caving and sub level stoping mines, this
More informationConcave Face Design Convex Face Design Flat Face Design Oilfield Face Design. Choosing a Downhole Drill Bit
Concave Face Design Convex Face Design Flat Face Design Oilfield Face Design Choosing a Downhole Drill Bit Concave Face - For medium soft to medium hard rock conditions in consolidated ground conditions
More informationSteel Accessories for hand held demolition tools
Steel Accessories for hand held demolition tools Steel Accessories for pneumatic, hand held hydraulic, gas powered and electric demolition tools The steel accessories in this catalog are intended for use
More informationPowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction. Hole range: 90 165mm ( 3 9/16 6 1/2 ) Power up your performance The PowerROC D55 is designed according to our philosophy
More informationST68 (2 3/4") tube drilling tools Shank adapters
Page Hexagonal shank adapters...61... 62 Atlas Copco... 67 Boart... 70 Furukawa... 71 T Tube Gardner-Denver, Ingersoll-Rand & Klemm... 72 Montabert... 73 SIG... Secoma... 75 Toyo...76 Shank adapter dimensions:
More informationBoomer XL3 D face drilling rig
Boomer XL3 D face drilling rig Three-boom tunneling drill rig for large sized underground tunnels and cross sections, with maximum coverage area 178 m 2 1 A giant of high penetration Boomer XL3 D is a
More informationFLEXIROC T30 R. Construction Edition. Hole diameter: mm (1 3/4 3 1/2 )
FLEXIROC T30 R Construction Edition Hole diameter: 45 89 mm (1 3/4 3 1/2 ) EXTEND YOUR RECH ND VERSTILITY THE FLEXIROC T30 R CONSTRUCTION EDITION IS TOPHMMER RIG DESIGNED FOR WIDE RNGE OF DRILLING PPLICTIONS.
More informationBoomer S2. Robust face drilling rig with a coverage area up to 56 m 2
Boomer S2 Robust face drilling rig with a coverage area up to 56 m 2 1 Robust performace in a small package The Boomer S2 is our smallest mining and tunneling rig with intelligent control, now tougher
More informationAtlas Copco Cobra petrol drill and breakers Multi-purpose tools for higher productivity
Atlas Copco Cobra petrol drill and breakers Multi-purpose tools for higher productivity Cobra a reliable team mate The Cobra machine has been building up a loyal fanclub since it was first launched in
More informationCasing Rotator Casing Oscillators Casings up to 3000 Special Hammer Grab Chisels Interlocking Tremie Pipes
Casing Rotator Casing Oscillators Casings up to 3000 Special Hammer Grab Chisels Interlocking Tremie Pipes Hydraulic Casing Rotator RDM/RDM-M Hydraulic Casing Rotator Type RDM Type RDM-M A A H2 H1 H2 H1
More informationDRILL FASTER AND REDUCE YOUR COSTS
DRILL FASTER AND REDUCE YOUR COSTS SANDVIK RH560 3.5, 4, 5 AND 6 DTH HAMMERS HIGHER PRODUCTIVITY, REDUCED DOWNTIME The all-new RH560 DTH hammer has been developed to be a robust and reliable addition to
More informationAtlas Copco forward and reversible plates More compaction efficiency, longer lasting
Atlas Copco forward and reversible plates More compaction efficiency, longer lasting Selection guide Expect more Get the job done faster... The Atlas Copco range of compaction equipment will take your
More informationPowerROC T30 E Surface drill rig for quarrying and construction
PowerROC T30 E Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (3.5 5.5 ) Stronger than ever With a robust engine and a reach of 4.3 meters the PowerROC T30 E takes your performance
More informationBoomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs
More informationShank adapters. Crowder Supply Co., Inc Roslyn St., Commerce City, CO Toll Free:
Crowder Supply Co., Inc. 8 Roslyn St., Commerce City, CO 80022 Toll Free: 888-883-54 www.crowdersupply.com Shank adapters Crowder Supply Co., Inc. 8 Roslyn St., Commerce City, CO 80022 Toll Free: 888-883-54
More informationLEOPARD DI650i TIME FOR A NEW LEADER
LEOPARD DI650i TIME FOR A NEW LEADER RELIABLE AND ROBUST MAIN COMPONENTS For over 50 years, we have claimed widespread expertise in developing drill rigs to meet your expectations. With that expertise,
More informationRobbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
More informationPOWER TO SUCCESS. SOOSAN TOP-HAMMER DRILL RIGS STD Series STD Series
www.soosanheavy.com STD Series STD Series Head office / Hwaseong Plant 109-2, Songsan-Ri, Yanggam-Myeon, Hwaseong-Si, Gyeonggi-Do, Korea TEL +82-31-350-5112 FAX +82-31-350-5259 Soosan China Soosan Machinery
More informationBoltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions
Boltec S Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions 1 Making mining safe Boltec S is a fully mechanized rock bolting rig suitable
More informationLHD. Spare parts list 23 M. Rock drills Construction Tools PC AB No
LHD 23 M Spare parts list Rock drills 2015 Construction Tools PC AB No. 3392 5014 01 2015-06 General information This spare parts list applies to the following: Part number Description 1801 3800 01 (clockwise
More informationHigh precision rock drilling for reliable performance and lower costs
High precision rock drilling for reliable performance and lower costs While every component in the drill string is crucial, the shank adapter must be engineered to withstand the most extreme stress. Its
More informationPowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking
More informationRH 571-5L, 571-5LS. Spare parts list. Rock drills Construction Tools PC AB No
Rock drills 2015 Construction Tools PC AB No. 9800 0808 01 2015-06 General information This spare parts list applies to the following: Part number Description 8311030129 RH 571-5L 8311030137 RH 571-5LS
More informationSmartROC T35 & T40 Surface drill rigs for quarrying and construction
SmartROC T35 & T40 Surface drill rigs for quarrying and construction SmartROC T35 hole diameter: 64 115 mm (2.5" 4.5") SmartROC T40 hole diameter: 76 127 mm (3" 5") World champion of fuel efficiency SmartROC
More informationBoomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2
Boomer 281 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationMG 300. Spare parts list. Multi grapple Atlas Copco Construction Tools GmbH No
MG 300 Spare parts list Multi grapple 0 Atlas Copco Construction Tools GmbH No. 3390 7354 0 0046 MG 300 Contents Contents General information................................................................
More informationPRODUCT CATALOGUE FLEXIBLE DUCTING
PROUCT CATALOGUE FLEXIBLE UCTING Serpent underground ventilation system Version 1.3 CONTENTS INTROUCTION UCTING 4 SYSTEM PARTS 5 SYSTEM INSTALLATION 6 PROUCTS TITAN / ZIP Straight uct 8 uct Adapter 9 uct
More informationGrind Matic BQ3-DTH. Operator s instructions Spare parts list
Grind Matic BQ3-DTH Operator s instructions Spare parts list Contents Safety instructions...3 Technical data...4 General...4 Applications...4 Technical description...4 Controls and other parts...5 Installation...6
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationBoomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2
Boomer 281-15 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationGrind Matic BQ3. Operator s instructions Spare parts list
Grind Matic BQ3 Operator s instructions Spare parts list Contents Safety instructions...3 Technical data...4 General...4 Applications...4 Technical description...4 Controls and other parts...5 General
More informationBOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters
BOLTEC M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m heights up to 9.5 meters BOLTEC M MAKING MINING SAFE A FULLY MECHANIZED ROCK BOLTING RIG FOR BOLT LENGTHS FROM 1.5-3.5 METERS.
More informationDiamec Smart 6 Core drilling rig
Diamec Smart 6 Core drilling rig Hole diameter: A, B, N and H Designed to perform Epiroc's advanced Rig Control System means the Diamec Smart 6 operates automatically. Drilling functions are easily performed
More informationMACH 303. Suitable for operation at air pressures of psi (7-24 bar). Drilling diameters of mm (3 3/8-4 ). Mach 303 Air Consumption
3 MACH 303 Mach 303 is a general purpose hammer for small hole drilling used in applications such as seismic, geological survey, micro-piling, floor, wall and roof-bolting or for blast-holes where environmental
More informationRock Drilling Tools. Brunner &Lay. Quality First since 1882.
Rock Drilling Tools &ay Quality First since 1882. In 2012, & ay, Inc. celebrated one hundred and thirty years of continuous operations under the ownership and control of the founding family. The original
More informationMining and Quarrying. Mining and Quarrying
History 1948 Halifax Tool Co founded to manufacture T/C & masons tools. 1951 Halco developed the first DTH (down-the-hole) hammer. 100 psi. 1953 Halco DTH drill rigs introduced. 1983 Valveless high pressure
More informationAtlas Copco screwdrivers Our know-how in your hands
Atlas Copco screwdrivers Our know-how in your hands Your needs drive us Product development at Atlas Copco is guided by the true experts you, the people who use our assembly tools every day. Based on your
More information00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
More informationRight rotation. Left rotation
HAND AUGER 35 to 150 mm CONTINUOUS FLIGHT AUGERS HAND AUGER Thread - auger 22 conical 20/27 Square rod 23 Square rod 32 35 F5 01003501 - - - 46 F5 01004602 - - - 63 F5 01006302 F5 01006303 F5 01006301-80
More informationSpare parts list. Post drivers heavy-duty PDR 95 T, PDR 95 RV.
Spare parts list Post drivers heavy-duty PDR 95 T, PDR 95 RV www.cp.com 339 536 0b Contents Contents General information............................................................... 5 Spare parts list....................................................................
More informationLPD. Spare parts list. Post drivers heavy-duty HD-T, HD-RV Atlas Copco Construction Tools AB No f
LPD HD-T, HD-RV Post drivers heavy-duty Contents Contents General information................................................................ 5.....................................................................
More informationMINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity
MINETRUCK MT431B Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B RELIABLE UNDERGROUND HAULAGE THE MINETRUCK MT431B IS AN ARTICULATED UNDERGROUND TRUCK WITH A 28.1-METRIC
More informationSADEv STRoNG SADEv MEDIUM PAGE 2
Sadev Strong Sadev Strong The Strong sliding door system has unique features that set it apart from the competition. Practical design to assist with installation, precision machined components, the strength
More informationComplete systems for efficient diamond drilling
Complete systems for efficient diamond drilling Power and intelligence in perfect When you measure efficiency in terms of number of holes per hour or day, it s just as much about useability and ergonomics
More informationRD20II RD20III Worldwide Dealer Network Worldwide Product Support Worldwide Availability Atlas Copco Drilling Solutions Inc.
Atlas Copco RD20 The RD20 Advantage equals power, performance, and mobility Powerful Feed System The patented carriage feed system is the heart of the RD20. It delivers a full 110,000 lb. (49,896 kg) of
More informationFast food that s full of fibre: Cobra petrol-driven drill and breakers Taste the real power. The take-away drill/breakers
obra Fast food that s full of fibre: Cobra petrol-driven drill and breakers Taste the real power The take-away drill/breakers A recipe for success The Cobra machine has been building up a loyal fan-club
More information