Blue 2 3/8" TO 13 5/8"

Transcription

1 Blue 2 3/8" TO 13 5/8"

2

3 TenarisHydril TenarisHydril offers outstandg premium connection design and technology worldwide With a comprehensive range of high performance products backed by an extensive global field service network and licensed threadg shops, we develop solutions to meet the needs of ever more demandg E&P environments TenarisHydril premium connections are supplied and supported by Tenaris, the leadg manufacturer and supplier of steel tubes and tegrated tubular services to the world's energy dustry For further formation please visit our website at wwwtenariscom TenarisHydril PREMIUM CONNECTIONS BLUE 3

4 Ma attributes size availability 2 3/8" to 13 5/8" features Designed for high performance and versatility ISO CAL IV tested and field proven Parabolic seal contact pressure profile mimizes gallg risk while improves sealg performance stability 70 ISO CAL IV tests Installed 70 countries Chosen by 200 operators 7 million feet stalled with Dopeless technology APPLICATIONS Deepwater HP/HT & Deep wells Horizontal & extended reach wells Shales Casg while drillg Thermal Applications Geothermal Surface & termediate casg Production casg, tie-backs and lers Tubg Options Dopeless technology Matched strength Special bevel Special clearance 4

5 Operational solutions 1 Easy make-up is developed with the rugged, coarse pitch thread and steep taper for deep stabbg Superior compression strength obtaed by optimized torque shoulder and controlled 25 degree stab flank reduced clearance 3 % ternal and external pressure metal seal Toroidal design generates stable seal behavior for all combed-load conditions Dope pocket accommodates excess of thread compound for efficient and reliable make-up TenarisHydril PREMIUM CONNECTIONS BLUE 5

6 Seal design Behavior under extreme combed loads The sphere-to-cone seal geometry (toroidal surface on the p, tapered surface on the box) achieves the parabolic seal contact pressure profile This provides lower contact pressure peaks (mimizg gallg risks durg make-up) but higher average contact pressure combation with longer seal contact length When combed, these two characteristics provide a more stable sealg performance even under extreme combed loads This presents % PIPY gas-tightness and % API collapse pressure (or % PEPY gas-tightness) As achieved the thread design, and combation with taper and pitch parameters, seal configuration was optimized to ensure the best sealg performance while preservg seal tegrity Safer make-up The ma seal contact pot set apart from p end provides seal protection while runng and less sensitivity of the sealg capacity to axial displacement that could be reached under extreme loads Deep stabbg reduces slidg distance and risk of gallg Dope pocket When used with dope, the Dope pocket volume accommodates excess of thread compound, thus mimizg both thread tegrity (p) risk and weaker sealg performance due to dope entrapment The cyldrical crests of the box thread close to the dope pocket allow the surplus dope to flow from the threads to the dope pocket BOX Dope pocket Tangent pot (Sealg pot) p RADIUS 6

7 Stable contact pressures for all loadg conditions The TSH Blue connection's performance matches the pipe body's performance terms of tension, compression, ternal and external pressures This is clearly seen overlappg the connection service envelope (CSE) to the Von Mises Ellipse of the pipe body Connection performance validation is done accordg to the ISO CAL IV specification, over the 14 different loadg pots that are defed on the ellipse (% of the VME of the pipe body) not only for design verification, but also for customer qualification Sealg performance is evaluated each of the quadrants by plottg the seal contact pressure along the seal length for each of the loadg pots B % PB VME=CSE % CSE LOADING POINTS (LP) TEST LOAD ENVELOPE % API COLLAPSE INTERNAL PRESSURE % PIPY A service envelope for Blue In each of the ISO CAL IV 14 loadg pots the tegrity and tensity of the contact pressures the metal-to-metal seal are checked, so as to ensure the sealg capacity of the connection COMPRESSION 8&9 -% PBYS MU % APY CP % PBYS TENSION % PEPY C EXTERNAL PRESSURE D SEAL CONTACT PRESSURE MAKE-UP LOADING POINT 1 LOADING POINT 2 LOADING POINT 3 LOADING POINT 4 LOADING POINT 5 Quadrant A Contact pressure under ternal pressure and tension PREMIUM CONNECTIONS BLUE SEAL LENGTH TenarisHydril 7

8 LOADING POINT 4 LOADING POINT 5 SEAL CONTACT PRESSURE SEAL LENGTH Quadrant B Contact pressure under ternal pressure and compression SEAL CONTACT PRESSURE LOADING POINT 5 LOADING POINT 6 LOADING POINT 7 LOADING POINTS 8&9 SEAL LENGTH Quadrant C Contact pressure under external pressure and compression SEAL CONTACT PRESSURE LOADING POINTS 8&9 LOADING POINT 10 LOADING POINT 11 LOADING POINT 12 SEAL LENGTH Quadrant D Contact pressure under external pressure and tension SEAL CONTACT PRESSURE MAKE-UP LOADING POINT 1 LOADING POINT 14 LOADING POINT 12 LOADING POINT 13 SEAL LENGTH 8

9 Thread design Improved compression and over torque capacity The proper combation of the thread configuration (reduced stabbg flank gaps and optimized stabbg flank angle) and the thicker negative torque shoulder section provides % compression ratgs as well as high over-torque capacity (normally 250% of maximum torque) Improved runng Thread parameters such as thread taper and thread pitch were also optimized order to provide the best runng response terms of simplicity and safety (deep stabbg, low cross-threadg risk, reduced turns to make-up position) This is achieved by usg two different tapers and two different thread pitches that allow to cover the whole range (from 2 3/8" to 13 5/8") Tensile capacity Optimized positive run-out load flank angle, able to equalize pipe body tensile capacity while providg better manufacturg and repairg conditions (compared to hooked thread profiles) BOX Reduced thread gap (stabbg flank) Positive load flank p BOX Negative torque shoulder PREMIUM CONNECTIONS BLUE p Thicker P nose TenarisHydril 9

10

11 Technical data table & Torque table for Blue

12 Technical data table 2 3/8" TO 5" Size Designation Nomal Weight lb/ft Wall Thickness Inside Pipe Body Standard Drift Special Drift Outside Couplg Length Connection Inside Make-Up Loss Critical Section Area 2 3/8 2 7/8 3 1/ / sq Interchangeable where bracketed Small variations the connection Internal will appear Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more formation consult TenarisHydril Runng Manual) Compression efficiency for SC and MS options is the same as the standard connection For the MS option, the couplg OD is reduced to the mimum critical area capable of providg the same tensile efficiency as the standard option 12

13 13 PREMIUM CONNECTIONS BLUE TenarisHydril Compression Efficiency % Jot Yield Strength Outside Outside Critical Section Area Tensile Efficiency Special Clearance Couplg Options Matched StRENgth x 0 lb sq % ksi ksi ksi ksi ksi ksi Tensile Efficiency %

14 5 1/2" TO 9 5/8" 5 1/2 6 5/8 7 Size 7 5/8 7 3/4 8 5/8 9 5/8 Designation Nomal Weight lb/ft Wall Thickness Inside Pipe Body Standard Drift Outside Couplg Length Connection Inside Make-Up Loss Critical Section Area sq Special Drift Interchangeable where bracketed Small variations the connection Internal will appear Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more formation consult TenarisHydril Runng Manual) Compression efficiency for SC and MS options is the same as the standard connection For the MS option, the couplg OD is reduced to the mimum critical area capable of providg the same tensile efficiency as the standard option 14

15 15 PREMIUM CONNECTIONS BLUE TenarisHydril Compression Efficiency % Outside Outside Critical Section Area Tensile Efficiency Special Clearance Couplg Options Matched StRENgth x 0 lb sq % Jot Yield Strength ksi ksi ksi ksi ksi ksi Tensile Efficiency %

16 9 7/8" TO 13 5/8" Size 9 7/8 10 3/4 11 3/4 11 7/8 13 3/8 13 1/2 13 5/8 Designation Nomal Weight lb/ft Wall Thickness Inside Pipe Body Standard Drift Outside Couplg Length Connection Inside Make-Up Loss Critical Section Area sq Special Drift Interchangeable where bracketed Small variations the connection Internal will appear Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more formation consult TenarisHydril Runng Manual) Compression efficiency for SC and MS options is the same as the standard connection For the MS option, the couplg OD is reduced to the mimum critical area capable of providg the same tensile efficiency as the standard option 16

17 17 PREMIUM CONNECTIONS BLUE TenarisHydril Compression Efficiency % Outside Outside Critical Section Area Tensile Efficiency Special Clearance Couplg Options Matched StRENgth x 0 lb sq % Jot Yield Strength ksi ksi ksi ksi ksi ksi Tensile Efficiency %

18 /8 2 7/ Torque table 2 3/8" TO 3 1/2" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

19 19 PREMIUM CONNECTIONS BLUE TenarisHydril 2 7/8 3 1/ size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

20 / / /2" TO 5" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

21 21 PREMIUM CONNECTIONS BLUE TenarisHydril 4 1/ size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

22 / " TO 6 5/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

23 23 PREMIUM CONNECTIONS BLUE TenarisHydril 6 5/ size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

24 / / /8" TO 7 3/4" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

25 25 PREMIUM CONNECTIONS BLUE TenarisHydril 7 5/8 7 3/ size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

26 /4 8 5/8 9 5/ /4" TO 9 7/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

27 27 PREMIUM CONNECTIONS BLUE TenarisHydril 9 5/8 9 7/ size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

28 /8 10 3/ /8" TO 13 3/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

29 29 PREMIUM CONNECTIONS BLUE TenarisHydril 10 3/4 11 3/4 11 7/8 13 3/ size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

30 /8 13 1/2 13 5/ /8" TO 13 5/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft SMYS: Specified Mimum Yield Strength An appropriate safety factor should be applied to these yield torque values

31 TenarisHydril PREMIUM CONNECTIONS BLUE 31

32 wwwtenariscom For further formation on our connections, please visit our website and fd: Runng Manual (general guideles on handlg and care of connections and well stallation recommendations) Premium Connections Performance Data (connections performance, torque values, geometries and pipe body data) Blankg Dimensions Threadg & Repair Shops locations For technical assistance, please contact Tenaris has produced this brochure for general formation only While every effort has been made to ensure the accuracy of the formation contaed with this publication, Tenaris does not assume any responsibility or liability for any loss, damage, jury resultg from the use of formation and data here Tenaris products and services are only subject to the Company s standard terms and Conditions or otherwise to the terms resultg from the respective contracts of sale, services or license, as the case may be The formation this publication is subject to change or modification without notice For more complete formation please contact a Tenaris s representative or visit our website at wwwtenariscom This brochure supersedes TSH / PC / Version 03 / September 2012 TSH / PC / Version 04 / July 2013 Tenaris 2013 All rights reserved