Slipper. For sliding cupboard doors. Max 9kg. straight sliding top hung systems B20. application

Transcription

1 Slipper straight sliding top hung systems For sliding cupboard doors. Max 9kg. APPLICATION For fitted bathroom and kitchen furniture of all kinds, such as serving hatches, cupboards and other items made from lightweight wood or chipboard For timber, timber framed or composite doors Silent nylon slides on attractive aluminium track Easily top fixed Simple to remove doors for cleaning and decorating DOOR SPECIFICATION Track System For Individual Doors: Max Door Weight Max Door Width Door Thickness Max Door Height Slipper 9kg 900mm 16-30mm 1800mm STANDARD SETS AND PACK Sets comprise of 2 top aluminium section tracks, 4 nylon sliders, 3 guides, safety stop, 2 flushpulls, all screws and fitting instructions. Set No. opening width Track length Hardware for HSS4 10mm 10mm 2 doors HSS 10mm 10mm 2 doors HSS6 1800mm 1800mm 2 doors Pack No. application HSS1 Single door fittings pack HARDWARE SPECIFICATION Track H130 Aluminium (900, 10, 10, 1800, 2400 & 3600mm lengths) Slider H1 White nylon Sliders are molded with radiused sides for ease of installation and for a smooth sliding action. Door Stop H28P Rubber-buffered stop s H132 White nylon saw cut guide s can be positioned on both sides of the door or slide in a sawcut in the centre line of the door. Accessories Flush Pull HP H130 - Track H1 - H28P - Door Stop H132 - HP - Flush Pull B

2 19 13 H1 Slider H130 Track NOT TO SCALE Door Height = height of opening less 16mm MAX MIN. 30 MAX. 16 MIN H28P Door Stop H132 Nylon BB ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

3 DOUBLE TOP LITE straight sliding top hung systems For top hung sliding wardrobe doors. Max 27kg each. APPLICATION For built-in furniture, i.e. wardrobes and cupboards in residential applications Easily adjusted door height Alternative guide channel systems available DOOR SPECIFICATION Track System double Top Lite For Individual Doors: Max Door Weight 27kg Door Thickness 16-mm Lightly framed timber doors or doors made from medium density fibreboard (MDF) must have provision for hangers to be screwed securely to the back face of the doors. STANDARD SETS AND PACKS Sets comprise top track, hangers, door stop(s), saw cut guide(s), all screws and fitting instructions. Set No. opening width Track length Hardware for HLW12 10mm 10mm 2 doors HLW1 10mm 10mm 2 doors HLW mm 1800mm 2 doors HLW mm 2400mm 3 doors Pack No. application HLW01 1 door pack HARDWARE SPECIFICATION Track HLWDA Aluminium (10, 10, 1800, 2400 & 4800mm lengths) s (2 per door) HLW2 HLW2 HLW222 Outer offset hanger Inner offset hanger Reversible offset hanger Door Stop H28P Rubber-buffered stop s H101N Nylon saw cut guide Accessories Single track HLWA Aluminium (10, 10, 1800, 2400 & 4800mm lengths) s H24/ Adjustable nylon guide H106SL/94 Spring loaded guide (suits H81X channel & H94FM channel) H113/81X Nylon guide (suits H81X channel) s For heavy duty applications or where more than 3 doors are required per opening H81X Aluminium channel (10, 10, 1800, 2400 & 3600mm lengths) H94FM Aluminium channel (00, 3000, 4000 & 6000mm lengths) HLWDA - Track HLW2 with white wheel H28P - Door Stop H24/ - HLW222 reversible with white wheel HLWA - Track HLW2 with coloured wheel H101N included in sets and packs H106SL/94 - H113/81X - and H81X - H94FM - B30

4 HLW HLWDA Track HLWDA Track HLW2 HLW2 NOT TO SCALE Double Top Lite 2 Door Application Finger Pull Removable Fascia MIN. MAX. H101N H94FM H101N s 19 MIN. MAX. 16 MIN. 19 MAX. HLWDA Track HLW2 Alternative H106SL/94 Spring Loaded (Not supplied with kit) Removable Fascia * For options and further information on door thickness and three hanger layouts, please contact our technical sales team. Alternative H24/ Adjustable Nylon (Not supplied with kit) H28P Door Stop Alternative H113/81X Nylon (Not supplied with kit) Double Top Lite 3 Door Application H101N s H81X 16 MIN. 19 MAX. HLWA Track HLW2 Lock Nut and Washer HLW222 Reversible Enables doors to be fitted either on the front or rear line of track (Included in HLW24 set and in Fitting Pack HLW01) H28P Door Stop H28P Door Stop H28P Door Stop Inside Inside 3 MIN. B30B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

5 SWIFt straight sliding top hung systems For top hung sliding doors. Max 30kg each. APPLICATION Ideal for residential interior top hung sliding doors Suitable for a single door or for two doors on a bi-parting installation - door width limits apply The track is sidewall fitted with provision for a hook-on pelmet All screws are the same size and length for quick selection and easy installation DOOR SPECIFICATION Track System Swift For Individual Doors: Max Door Weight 30kg Max Door Width 10mm Min Door Thickness mm Suitable for use with lightly constructed timber framed doors of flush or panelled construction. Provision must be made for fitting the hangers securely, since the hangers strike the door stops. STANDARD SETS AND PACK Sets comprise of top track, 2x hangers, 2x door stops, H101N and H162 guides, all screws and installation instructions. Set No. max door width Hardware for Track length HS16 900mm 1 door 1600mm HS24 10mm 1 door 2440mm Pack No. HS1 The S1 is a pack of fittings only, without track, for use with one S24 set for bi-parting doors, each 7mm maximum width. HARDWARE SPECIFICATION Track H30A Aluminium (1600 & 2440mm lengths) Track includes recess for hook-on pelmet. s (2 per door) H30HDP Steel hanger with nylon wheel Door Stop H30DS Rubber buffered stop s H101N Nylon saw cut guide H162 Adjustable floor guide. Accessories Pelmet and End Caps H30PEL Pelmet in pearl white on zinc coated steel. Hooks onto track, no screws required. Supplied with End Caps made from high impact polypropylene. The end caps are a push-fit onto the pelmet. Pelmet length: 1800mm. H30A - Track H30EC - End Cap left hand H30DS - Door Stop H101N - (supplied in sets and fitting packs) H30PEL - Pelmet H30HDP - H162 (supplied in sets and fitting packs) B40

6 7 H30A - Track H30HDP - NOT TO SCALE 32 Door Height 8 H MIN 9 MAX H30PEL - Pelmet (optional) H101N - MIN MIN MAX MAX 73 B40B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

7 SPRINT straight sliding top hung systems For top hung sliding doors. Max 30kg. APPLICATION For entrance doors and doors between rooms For timber, timber framed or composite doors Silent nylon guides and hangers on aluminium track Floor component guide only DOOR SPECIFICATION Track System For Individual Doors: Max Door Weight Max Door Width Door Thickness Max Door Height Senator 30kg 900mm or 1mm -mm 2400mm STANDARD SETS AND PACK Sets comprise of jump-proof, face/soffit fixing aluminium section track, top fixing hangers, H162 guide, stop, all screws and fitting instructions. Set No. opening width Hardware for Track Length HSP3 900mm 1 door 1800mm HSP 1mm 1 door 3000mm Pack No. application HSENSP1 One door fitting kit HARDWARE SPECIFICATION Track HA Aluminium (3000mm length) s (2 per door) H161 Door Stop H28P Rubber buffered stop s H101N Nylon cut saw guide H162 Adjustable floor guide Accessories Pelmet Senator hanger Top fixing hangers with ball race nylon tyred wheels for smooth operation. Built in adjustability for ease of installation H40P/184DP Pelmet in white on zinc coated steel. Face fixes to wall. Supplied with screw on End Caps. Pelmet length: 184mm. HA - Track H28P - Door Stop H101N H40P/184 - Pelmet H161 - H162 (supplied in sets and fitting packs) B

8 HA Track H MIN MAX. NOT TO SCALE H162 MIN. MIN MAX. MAX H28P Door Stop BB ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

9 single top straight sliding top hung systems For single track sliding wardrobe doors. Max 4kg. APPLICATION For timber framed composite doors Silent nylon wheeled ball bearing hangers and aluminium track Easily adjusted door height Alternative guide channel systems available DOOR SPECIFICATION Track System For Individual Doors: Max Door Weight Max Door Width Door Thickness Max Door Height Single Top 4kg 900mm 16-40mm 2400mm STANDARD SETS AND PACK Sets comprise of jump-proof, face/soffit fixing aluminium section track, ball bearing hangers, nylon guides, rubber-buffered stop, all screws and fitting instructions. Set No. opening width Track length Hardware for HST12 600mm 10mm 1 door HST1 7mm 10mm 1 door HST18 900mm 1800mm 1 door Pack No. application HST01 Single door fittings pack HARDWARE SPECIFICATION Track HA Aluminium (3000mm length) s (2 per door) H2 Door Stop H28P Rubber-buffered stop Outer offset hanger Nylon tyred wheel face fitted to the back of the door. s H24/ Nylon adjustable guide set Included in sets and packs. Alternative guides available. Accessories s H101N Nylon saw cut guide H106SL/94 Spring loaded guide (suits H81X channel & H94FM channel) H113/81X Nylon guide (suits H81X channel) s H81X Aluminium channel (10, 10, 1800, 2400 & 3600mm lengths) H94FM Aluminium channel (00, 3000, 4000 & 6000mm lengths) Pelmet HF134/# Fascia for soffit fixed applications for doors up to mm thick HF134/ECP Fascia end cap pack HF1/# Fascia for soffit fixed applications for doors up to mm thick HF1/ECP Fascia end cap pack Note: Replace # with 00, 3000 & 4000mm lengths. All fascia anodised finish HF134 - Fascia H2 H24/ - H101N HA - Track HF1 - Fascia H28P - Door Stop H113/81X - and H81X - H106SL/94 - H81X - H94FM - B60

10 HA Track HA Track 44 MIN. 2 MAX. HF134 Fascia NOT TO SCALE H24/ Adjustable Nylon 16 MIN 4016 MAX MIN. 40 MAX. ( MAX. with H134 Fascia) H HF1 Fascia H101N Saw Cut 8 ( MAX. with H1 Fascia) H106SL/94 Spring loaded H113/81X Nylon H81X H94FM H2 3 MIN. B60B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

11 double top straight sliding top hung systems For double track sliding wardrobe doors. Max 4kg. APPLICATION For heavy duty applications larger wardrobes and cupboards in hotels, schools and offices For timber, timber framed or composite doors Silent nylon wheeled ball bearing hangers and aluminium track Easily adjusted door height Alternative guide channel systems available DOOR SPECIFICATION Track System For Individual Doors: Max Door Weight Max Door Width Door Thickness Max Door Height double Top 4kg 900mm 16-40mm 2400mm STANDARD SETS AND PACK Sets comprise of jump-proof, face/soffit fixing aluminium section track, ball bearing hangers, nylon guides, rubber-buffered stop, all screws and fitting instructions. Set No. opening width Track length Hardware for HW12 10mm 10mm 2 doors HW1 10mm 10mm 2 doors HW mm 1800mm 2 doors HW mm 2400mm 3 doors Pack No. application HW01 Single door fittings pack HW02 Two door fittings pack HARDWARE SPECIFICATION Track HA Aluminium (3000mm length) s (2 per door) H2 H2 H222 Outer offset hanger Inner offset hanger Reversible offset hanger Door Stop H28P Rubber-buffered stop s H24/ Nylon adjustable guide set 1 guide set for 2 doors, 2 sets for 3 doors. Included in door sets and packs. Alternative guides available. Accessories Track HA Aluminium single track (3000mm length) s H101N Nylon saw cut guide H106SL/94 Spring loaded guide (suits H81X channel & H94FM channel) H113/81X Nylon guide (suits H81X channel) s For heavy duty applications or where more than 3 doors are required per opening H81X Aluminium channel (10, 10, 1800, 2400 & 3600mm lengths) H94FM Aluminium channel (00, 3000, 4000 & 6000mm lengths) Pelmet HF134/# Fascia for soffit fixed applications for doors up to mm thick HF134/ECP Fascia end cap pack HF1/# Fascia for soffit fixed applications for doors up to mm thick HF1/ECP Fascia end cap pack Note: Replace # with 00, 3000, 4000mm lengths. All fascia anodised finish HA - Track HF134 - Fascia HF1 - Fascia H2 H2 H222 H28P - Door Stop H113/81X - and H81X - H81X - H24/ - Set H106SL/94 - HA - Track H101N - H94FM - B70

12 HA Track HA Track MIN to MIN to 2 2 MAX 2 MAX Finger Pull HF134 Fascia NOT TO SCALE H2 30 ( MAX. with HF134 Fascia) HA Track H94FM Double Top 2 Door Application H101N s MIN MIN MAX. MAX H2 MIN. 40 MAX. H106SL/94 Spring Loaded MIN. 40 MAX. HF1 Fascia H2 ( MAX. with HF1 Fascia) MIN. 40 MAX. Double Top 3 Door Application H101N s MIN. MIN 24 MAX. H28P Door Stop H28P Door Stop H28P Door Stop Inside Inside 42 H24/ Adjustable Nylon H28P Door Stop H113/81X Nylon HA Track H2 H81X H2 3 MIN. B70B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

13 MARATHON & 90 straight sliding top hung systems For sliding doors. Max kg or 90kg. APPLICATION Used for heavy-duty domestic and light commercial applications, doors and partitions For timber, timber framed or composite doors Easily adjusted door height Simultaneous action option Fire door kit option available for Marathon 90 DOOR SPECIFICATION Track System marathon Marathon 90 For Individual Doors: Max Door Weight kg 90kg Max Door Width 10mm 10mm Door Thickness 32-mm 32-mm Max Door Height 3000mm 3000mm STANDARD SETS AND PACK Sets comprise of top assembly, nylon top plates, floor guide, nylon, channel, wall mounted stop, all screws and fitting instructions. Marathon Marathon 90 Set No. Set No. Door width Track length Hardware for HJ2 HS mm 19mm 1 door HJ3 HS mm 1473mm 1 door HJ4 HS mm 1702mm 1 door HJ HS 10-10mm 1981mm 1 door HJ6 HS mm 24mm 1 door HARDWARE SPECIFICATION Top plate (2 per door) H43 Nylon top plate with integral buffer Stop H44 Wall mounted stop s H101N Nylon saw cut guide H102N/93 Floor mounted channel guide s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) Accessories Self closing kit HSCK1 For doors up to 60kg Pelmet H40P/184 Galvanised fascia for face fixed applications (HJ3 and HS3 sets only) HEC40P Galvanised fascia end cap pack H40P/184P Artic white fascia for face fixed applications (HJ3 and HS3 sets only) HEC40PW Artic white fascia end cap pack H3/40 Soffit fix brackets (pack of ) Fire door kit HFDK1 Self closing fire door kit. For use in conjunction with Marathon kits S3, S4, S & S6 (purchased separately) HFDK2 Non-self closing fire door kit. For use in conjunction with Marathon kits S3, S4, S & S6 (purchased separately) Simultaneous Action Kit H23 For biparting doors up to 60kg H3/40 - H43 - Top plate H44 - Wall Mounted Stop Marathon Sliding Door System H40P/184 - Pelmet H101N - H93 - H102N/93 - B80

14 H40P/184 Pelmet HJ or HS Marathon Track Set H3/40 32 MIN MAX 32 MIN 32 MIN MAX 16 H93S 16 H102N/93 H102N/93 6 MIN 7 MAX H44 Wall Mounted Stop H43 Top Plate HJ or HS Marathon Track Set H43 Top Plate 32 MIN 32 MIN MAX H93S 70 MIN 80 MAX 32 M B80B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

15 Sirocco Self Closing System straight sliding top hung systems For sliding timber and metal doors. Max. 80kg. APPLICATION Suitable for both domestic and commercial interior applications Designed to give a smooth and quiet operation, with a hydraulically controlled soft close feature Adjustable closing speed feature Door brake to reduce opening speed to prevent damage to the door and system Operational between temperature ranges of -10 C to 40 C Optional hold open unit giving adjustable time delay before self closing DOOR SPECIFICATION Track System For Individual Doors: Max Door Weight Min Door Width Max Door Width Door Thickness Sirocco 80kg 800mm 10mm 30-46mm STANDARD SETS AND PACK Sets comprises of aluminium track (20mm), hangers, hydraulic control unit, power spring unit, door stops, guides, roller, all screws and fitting instructions. Pack No. application HSIRRH Right Hand Opening HSIRLH Left Hand Opening HDELRH Delayed Closing Timer Right Hand HDELLH Delayed Closing Timer Left Hand HARDWARE SPECIFICATION s H102SS/94 Timber doors - wall mounted and multiple run guide H10SS/94 Timber doors - face mounted guide H106SS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories H10SS/ Ø16 1 Sirocco Self Closing System H106SS/94-1 Sirocco 3 30 H102SS/ H94 - B100 7 Ø

16 NOT TO SCALE 1 30 MIN MAX. MIN 46 MAX or more 30 OR MORE HSIRFAS Pelmet Leading Edge LEADING EGDE 1 1 Trailing Edge TRAILING EGDE 100 FFL B100B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

17 HUSKY & 100 straight sliding top hung systems For sliding timber and metal doors. Max. kg or 100kg. APPLICATION Ideally suited for room dividers and wardrobe doors Quiet operation galvanised steel or aluminium track with nylon rollers Suitable for timber, timber framed, composite or metal framed doors DOOR SPECIFICATION Track System husky husky 100 For Individual Doors: Max Door Weight kg 100kg Max Door Width 12mm* 12mm* Door Thickness -mm -mm Max Door Height 2400mm 2400mm * Max door width using Husky sets. Wider doors can be accomodated by ordering track and door components separately. STANDARD SETS AND PACK Sets comprise of aluminium track, 2x hangers, 1x clip stop, 1x track stop, 1x saw cut guide, face fix brackets, all screws & fitting instructions. Husky Husky 100 Set No. Set No. Track Length Max Door Size H/1A H100/1A 10mm 1 door H/18A H100/18A 1800mm 1 door H/A H100/A 00mm 1 door H/24A H100/24A 2400mm 1 door Pack No. application HN Single door fittings pack kg. H100 Single door fittings pack 100kg. HARDWARE SPECIFICATION Track H280 Steel (00, 3000, 4000 & 6000mm lengths) H280A Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 27mm centres (maximum) s H281 Face fixed steel (for steel track) H281A Face fixed aluminium (for aluminium track) H281AX End and jointing bracket aluminium (for aluminium track) Spacing 27mm centres (maximum) s (2 per door)* H284N Nylon bodied, acetal wheel hangers (Husky ) H284 Nylon bodied, needle roller bearings 4-wheel hangers (Husky 100) * Each panel must be rigid enough to be supported by only two hangers Clip Stop H601H Adjustable retaining stop Track Stop H287 Rubber buffer stop s H102N Nylon saw cut guide H106N/94 Roller guide. Steel plate with nylon roller H106SL/94 Spring loaded guide (suits H81X channel & H94FM channel) s H94FM Aluminium (00, 3000, 4000 & 6000mm lengths) H94X Aluminium (00, 3000, 4000 & 6000mm lengths) Accessories Fascia HF134/# Fascia for soffit fixed applications for doors up to mm thick HF134/ECP Fascia end clip pack HF1/# Fascia for soffit fixed applications for doors up to mm thick HF1/ECP Fascia end clip pack HF140/# Fascia for face fixed applications for doors up to mm thick (includes end caps) Note: Replace # with 00, 3000, 4000 & 6000*mm lengths. *HF140 only Soft Stop See data sheet B100 Simultaneous Kit See data sheet B1 (Husky 100 only) H281 - H280A - Track H284 - H287 - Track Stop H106N/94 - H94 - H281A - H106SL/94 - H280 - Track H281AX - H284N - H601H - Clip Stop H102N - H94FM - B110

18 7 23 Min 23 to Max MAX. MAX NOT TO SCALE B Packer = Packer 13 Min MIN. H284 H102N Saw Cut H281A Face Fix B 7 Aluminium Track 14 Aluminium Track H280A Track F140 Fascia 23 Min 23 to Max 7 to Min Max 13 Min MIN. Steel Track 33 Packer H281 Face 32 Fix H280A Track H280 Track 49 B B = -mm B B B B B B H284 Alternative guide H106N/94 (Not supplied with kit) HF134 Fascia H106SL/94 (Not supplied with kit) H94X H94FM 8 30 H Alternative guide arrangement requires an additional H106SL/94 (Not supplied with kit) Steel Track H28 10 H94X or H94 29 Alternative guide H106N/94 (Not supplied with kit) H280 Track 1 Min 1 to 23* 23 Max * Measureme based on 3mm *Measurements metal framing based on 3mm metal framing 8.4Ø Ø8.4 B110B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

19 SIM 100 (for Husky) straight sliding top hung systems Simultaneous action kit for bi-parting doors. Max. 100kg. APPLICATION Designed for internal bi-parting panels To be used in conjunction with the Husky 100 system For internal partition bi-parting timber, timber framed or composite panels Kit can be retro fitted to existing installations Ideal for pairs of doors opening in to pocket walls For use with either steel or aluminium Husky track The system uses polypropylene coated cable for quiet operation, plastic pulley wheels rotating on ball bearings to provide reliable operation and a tension spring providing smooth operation DOOR SPECIFICATION Simultaneous Action Kit SIM 100 Max Door Weight 100kg Minimum Door Weight kg Max Door Width 12mm Door Thickness -mm Max Door Height 2400mm Door Material Timber STANDARD SETS AND PACK Set No. opening width Hardware for SIM mm 2 doors SET COMPRISES OF 1 Polypropylene coated cable with 1 Fixed loop 2 Pully assemblies with extended bolts 1 Adjuster bolt with nut 1 RH door bracket 1 LH door bracket 1 Cable collar with grub screws 1 Thimble inset 1 Cable clamp 1 Spring 1 Fitting instructions Left hand clip stop and pulley assembly Cable anchored to right hand door, tensioning and adjustment bolt Right hand clip stop and pulley assembly Cable anchored to left hand door B1

20 E nd bolt removed and replaced with olt, spacer and pulley assembly k or Diagram 1. Left hand clip stop and pulley assembly Clip stop end bolt removed and replaced with extended Left hand bolt, clip spacer stop and pulley assembly assembly Track Track Left hand door Right hand door Left hand Left hand door door Right hand hand door door Diagram 3. Cable anchored to left hand door Elevation view of system Diagram 3. Cable anchored to left hand door Diagram. Cable anchored to left hand door Cable collar Left hand door bracket Centre Line of doors Centre line of doors Track Cable clamp Right Left hand door mm Left hand door Cable Clip stop end bolt removed and replaced with extended bolt, spacer and pulley assembly Elevation view of system Elevation view of system Diagram 2. Right hand clip stop and pulley assembly mm Right hand door Track Left hand doo Clip stop end bolt removed and replaced with extended Right hand clip stop and pulley assembly bolt, spacer and pulley assembly Clip st Elevation view of system Diagram 4. Cable anchored to right hand door, tensioning Cable and anchored adjustment to right bolt. hand door, tensioning and adjustment bolt Thimble insert Spring Adjuster bolt Lock nut Adjuster nut Right hand door bracket Door thickness Fixed loop Righ B1B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax able anchored to left hand door Diagram 4. C

21 HUSKY low headroom 100 straight sliding top hung systems For timber top hung sliding doors. Max 100kg. APPLICATION Designed to create a modern minimalist finish with all parts concealed Can reduce the clearance between the track and the top of the door to 2mm Vertically adjustable sliding door kit for low or restricted headroom applications Designed to accomodate single or multiple panels on one or more tracks Used to maximise door height Engineered for easy installation and adjustment DOOR SPECIFICATION Track System low Headroom 100 For Individual Door Leaves: Max Door Weight 100kg Door Thickness 34-mm* Max Door Height 2700mm * For doors thicker than mm, please contact our technical sales team for further information. STANDARD SETS AND PACK Sets comprise of 2x Low Headroom units, 2x end caps, 2x clip stops, guides, all screws and fitting instructions. Pack No. application HLH100 1 door pack HARDWARE SPECIFICATION Track H280A Aluminium (00, 3000, 4000 & 6000mm lengths) H280AN Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) HLH280AN Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 27mm centres (maximum) s H281A Face fixed aluminium H281AX End and jointing bracket aluminium H281A pack, piece pack includes 2x H281AX Spacing 27mm centres, use H281AX at either end of track s H102N Nylon saw cut guide H102SS/94 Timber doors - for multiple runs of doors H106SL/94 Spring loaded guide H106SS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94FM Aluminium (00, 3000, 4000 & 6000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Interlocking Seal H9BZ/4800 H9CA/4800 Bronze anodised (4800mm to suit typical 2400mm door height) Clear anodised aluminium (4800mm to suit typical 2400mm door height) Drilled and countersunk. Includes brush seal. Refer to Components Section for more information HLH280AN - Track H280A - Track H281A - H281AX - Low Headroom Unit H94 - H94FM - H106SS/94 - H106SL/94 - H102SS/94 - H102N - B130

22 ? 33?? H280A Track 44 MAX. 37 MIN. MIN. 33 Packer B Packer = ?? MAX 37 MIN. H280A Track X.. 2 MIN. 9 MAX. NOT TO SCALE 3 MIN. 10 MAX. 2 MIN. 9 MAX. 2 to 9 102N MAX MAX. 34 MIN. 34 MIN. H106SS/94 3 MIN. 10 MAX. 3 to 10 H94X MAX. MIN MIN. 9 MAX. MAX 34 MIN. 119 Cutout for Low Headroom Unit H106SS/94 3 MIN. 10 MAX. 2 MIN. 92 MAX. to 9 3 MIN. 0 to MAX. 10?? 7 HLH280AN Track 3 MIN. 10 MAX. 14 H94PSC Ceiling panel H106SS/ H102SS/94 2 to 9 H102N Saw Cut 9 to B130B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

23 3 3 6 SOLTAIRE 1 straight sliding top hung systems For top hung sliding doors. Max 1kg each. APPLICATION Manufactured from high grade 6 stainless steel with anodised aluminium track This reliable system is extremely durable and ideal for coastal applications, heavy use or areas requiring a high level of corrosion resistance Designed for interior and exterior doors up to 1kg Ideal for residential or commercial applications Designed to accommodate single or multiple panels on one or more tracks s available for MDF, timber or metal doors The track can be soffit fixed or face fixed to give flexibility of installation DOOR SPECIFICATION Track System Soltaire1 For Individual Doors: Max Door Weight 1kg Door Thickness 19-48mm* Max Panel Height 3000mm * For doors thicker than 48mm, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H1 Aluminium (00, 3000, 4000 & 6000mm lengths) H1A Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 600mm centres (maximum) Brush Strips BS10, BS1, Available in black in 4 brush heights, by the metre BS, BS s H1/SS Face fixed stainless steel H/SS Double run face fixed stainless steel Starting mm from end of track fix at 600mm maximum centres. s H1/1/SS Timber Doors top fix surface mounted (2 per door)* H2/1/SS MDF Doors face fixing H6/1/SS Metal Doors angle frame fixing H7/1/SS Timber Doors concealed plate fixing * Each panel must be rigid enough to be supported by only two hangers Track Stop HH4/SS Anodised aluminium with rubber buffer s H101N Nylon saw cut guide H102SS/94 Timber doors - wall mounted and multiple run guide H104P/89 Metal door - angle frame H104PX/89 Metal door - box section H10SS/94 Timber doors - face mounted guide H106SS/94 Timber doors - concealed fixing with SS bearing s H89SS Stainless steel (00 & 3000mm length) H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Interlocking Seal H9BZ/4800 H9CA/4800 Bronze anodised (4800mm to suit typical 2400mm door height) Clear anodised aluminium (4800mm to suit typical 2400mm door height) Drilled and countersunk. Includes brush seal. Refer to Components Section for more information M HH4/SS - Track Stop Ø10 69 H7/1/SS M8 H1/SS - Ø M8 H2/1/SS - IMAGE COMING SOON H/SS - 10 H10SS/ H6/1/SS - M H1 - Track H1/1/SS H94 - H106SS/ Ø H102SS/94 - H104P/89 - H101N - B

24 H1/SS Face Fix 40.7 H1/SS Face Fix 80 NOT TO SCALE 12 MAX. MIN. 0 HH4/SS 1 12 H7/1/SS 2/1/SS MAX. 12 to N 3 MIN MAX. to 1 H106SS/94 H2/1/SS H106SS/94 H94PSC 14 /SS HH4/SS /1/SS 34 MIN. 7 MAX. HH4/SS 1/1/SS 19 H6/1/SS 104P/89 106SS/ X 12 H102SS/94 H94 H94X MIN. to MAX. H101N Saw Cut H1/1/SS 8 3 to 1 19 MIN. 32 MAX. H/SS Face Fix 88 H106HSS/94 12 to MAX MIN to MAX. 7 MAX. 12 MAX MIN to MIN. MAX. MIN. H104P/89 H89SS 3 to 1 H94 H94X 19 MIN. 19 to MAX. MIN. 3 MIN. 1 MAX. B140B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

25 SOLTAIRE low headroom 1 straight sliding top hung systems For timber top hung sliding doors. Max 1kg. APPLICATION Designed to create a modern minimalist finish with all parts concealed Can reduce the clearance between the track and the top of the door to 2mm Vertically adjustable sliding door kit for low or restricted headroom applications Used to maximise door height Engineered for easy installation and adjustment Designed to accomodate single or multiple panels on one or more tracks DOOR SPECIFICATION Track System low Headroom 1 For Individual Door Leaves: Max Door Weight 1kg Door Thickness -48mm* Max Door Height 2700mm * For doors thicker than 48mm, please contact our technical sales team for further information. STANDARD PACK Pack comprises of 2x Low Headroom units, 2x end caps, 2x track stops, all screws and fitting instructions. Pack No. application HLH1 1 door pack HARDWARE SPECIFICATION Track H1 Aluminium (00, 3000, 4000 & 6000mm lengths) H1A Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 600mm centres (maximum) s H1/SS Face fixed stainless steel H/SS/1 Double face fixed stainless steel Starting mm from end of track fix at 600mm centres (maximum) Track Stop HH4/SS Anodised aluminium with rubber buffer s H102N Nylon saw cut guide H102SS/94 Timber doors - wall mounted and multiple run guide H10SS/94 Timber doors - face mounted guide H106SS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Interlocking Seal H9BZ/4800 H9CA/4800 Bronze anodised (4800mm to suit typical 2400mm door height) Clear anodised aluminium (4800mm to suit typical 2400mm door height) Drilled and countersunk. Includes brush seal. Refer to Components Section for more information HH4/SS - Track Stop H/SS Ø H10SS/ H1 - Track H1/SS - Low Headroom Unit H94-1 H102N - Ø16 H102SS/94-1 H106SS/94 - B1

26 NOT TO SCALE 23 H94PSC H1/SS Face Fix MAX. 102N MIN. MIN. 2 Mto 9 9 M 3 M 3 to 101 M H106SS/94 H106SS/94 12 MAX. MIN. H94X 3 to 1 H106SS/ H1 Track Cutout for Low Headroom Unit H1 Track H/SS Double Face Fix 88 7 H102SS/94 19 M 32 M 3 to 1 34 M 7 M 34 MIN. 7 MAX. 34 to 7 H102N Saw Cut B1B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

27 Sienna straight sliding top hung systems For sliding timber doors. Max. 1kg. APPLICATION Elegant timber door system that creates a minimalist look 1kg system designed for doors 30-70mm thickness Rollers are engineered to run effortlessly along a brushed stainless steel track Stops are positioned to run on the track to limit door travel High quality stainless steel hangers and brackets DOOR SPECIFICATION Track System For Individual Doors: Max Door Weight Min Door Width Door Thickness Max Door Height Sienna 1kg 700mm 30-70mm 20mm STANDARD SETS AND PACKS Sets comprise of 2 hangers, 2 left & right door stops, one guide & 2 bar end caps Pack No. hardware for HSN1T 1 door HARDWARE SPECIFICATION Track H Stainless Steel (00, 20, 3000, 30, 4000 & 00mm lengths) Ømm tubular track, drilled and pre-assembled with correct number of brackets Track Stop (2 per door) H/UDS s H101/SS Floor guide End Cap H/EC End cap for track H/UDS - Track Stop H/EC - End Cap Wall Plate H - Track H101/SS - Floor B160

28 1 Marking first bracket position Marking first bracket position Y 100 H Track X OPENING OH X = 1-40 = 110mm Y = 40 + = 81mm Wall Plate NOT TO SCALE Opening Opening height (OH) Height (OH) 1 H101/SS Floor 40mm Opening Width width (OW) Door Door Width width (DW) DW = OW + 80mm = 40 = Floor Door Door Height height (DH) DH = OH mm 1 = Standard Bar No. of Fixing Plates/s 00mm 4 20mm 3000mm 6 30mm mm 8 00mm 11 B160B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

29 6 SOLTAIRE 180 straight sliding top hung systems For top hung sliding doors. Max 180kg each. APPLICATION Manufactured from high grade 6 stainless steel with anodised aluminium track This reliable system is extremely durable and ideal for coastal applications, heavy use or areas requiring a high level of corrosion resistance Designed for interior and exterior doors up to 180kg Ideal for residential or commercial applications Designed to accommodate single or multiple panels on one or more tracks s available for timber or metal doors The track can be soffit fixed or face fixed to give flexibility of installation DOOR SPECIFICATION Track System Soltaire 180 For Individual Doors: Max Door Weight 180kg Door Thickness -48mm* Max Panel Height 3000mm * For doors thicker than 48mm, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H180A Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 900mm centres (maximum) Brush Strips BS10, BS1, Available in black in 4 brush heights, by the metre BS, BS (mm) s H1/SS Face fixed stainless steel H/SS Double run face fixed stainless steel Starting mm from end of track fix at 900mm maximum centres. s H2/180/SS Timber doors angle plate fixing (2 per door)* H3/180/SS Timber doors saddle plate fixing H6/180/SS Metal doors angle frame fixing H6X/180/SS Metal doors box frame fixing H7/180/SS Timber doors concealed plate fixing H7/180/SS Metal doors concealed plate fixing * Each panel must be rigid enough to be supported by only two hangers Track Stop HH/SS Anodised aluminium with rubber buffer s H102SS/94 Timber doors - wall mounted and multiple run guide H104PX/89 Metal door - box section H104P/89 Metal door - angle frame H10SS/94 Timber doors - face mounted guide H106HSS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H89SS Stainless steel (00 & 3000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Interlocking Seal H9BZ/4800 H9CA/4800 Bronze anodised (4800mm to suit typical 2400mm door height) Clear anodised aluminium (4800mm to suit typical 2400mm door height) Drilled and countersunk. Includes brush seal. Refer to Components Section for more information 102 HH/SS - H2/180/SS - H6/180/SS - Ø H10SS/94 - IMAGE COMING SOON HH/SS - Track Stop H6X/180/SS , Ø6 80 H3/180/SS H7/180/SS H94 - M H180 - Track H1/SS H104PX/ M Ø16 H102SS/94-1 H104P/89 - H106HSS/94 - B Ø

30 8 1/SS HH/SS 7/180/SS NOT TO SCALE 106HSS/94 94X 6 H/SS 47 1/SS HH/SS SS/94 104PX/893/180/SS MIN X 18 MIN - 24 MAX 10SS/94 34 MIN - 6 MAX 94X 4 MAX. 88 H2/180/SS H1/SS Face Fix to 32 MAX. 6/180/SS 104P/89 89 MIN. MIN. H89SS 88 HH/SS Double Face Fix HH/SS H6/180/SS 1 H7/180/SS 180 MAX MAX. 2/1/SS MIN. 3/180/SS 7 MAX H/SS X/180/SS HH/SS 19 MIN. MIN. MIN. H3/180/SS 32 MAX. 12to MAX. MAX. HH/SS 3 to 10 H1/SS Face Fix to 32 MIN. * H104PX/89 H89SS H106HSS/94 H94PSC H106HSS/94 6 MIN. 1 MAX. 6 to 1 * For doors thicker than 10 48mm, please contact our technical sales team for further information. HH/SS 10SS/94 H106HSS/94 94X H102SS/ H94X to 42 MAX. MAX MIN MIN. MAX. 12 to 42 MAX. MAX. H6X/180/ SS MIN. H104P/89 6 MIN. 1 6 MAX. to 1 MIN. H10SS/94 B170B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax MIN - 24 MAX 34 MIN - 6 MAX

31 SOLTAIRE low headroom 180 straight sliding top hung systems For timber top hung sliding doors. Max 180kg. APPLICATION Designed to create a modern minimalist finish with all parts concealed Can reduce the clearance between the track and the top of the door to 2mm Vertically adjustable sliding door kit for low or restricted headroom applications Used to maximise door height Engineered for easy installation and adjustment Designed to accomodate single or multiple panels on one or more tracks DOOR SPECIFICATION Track System low Headroom 180 For Individual Door Leaves: Max Door Weight 180kg Max Door Width 3300mm Door Thickness -48mm* Max Door Height 2700mm * For doors thicker than 48mm, please contact our technical sales team for further information. STANDARD PACK Pack comprises of 2x Low Headroom units, 2x end caps, 2x track stops, all screws and fitting instructions. Pack No. application HLH180 1 door pack HARDWARE SPECIFICATION Track H180A Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 900mm centres (maximum) s H1/SS Face fixed stainless steel HH/SS Double face fixed stainless steel (heavy) Starting mm from each end of track fix at 900mm centres (max.) Track Stop HH/SS Anodised aluminium with rubber buffer s H102SS/94 Timber doors - wall mounted and multiple run guide H10SS/94 Timber doors - face mounted guide H106HSS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Interlocking Seal H9BZ/4800 H9CA/4800 Bronze anodised (4800mm to suit typical 2400mm door height) Clear anodised aluminium (4800mm to suit typical 2400mm door height) Drilled and countersunk. Includes brush seal. Refer to Components Section for more information HH/SS - Track Stop 10 H10SS/94 - IMAGE COMING SOON HH/SS - 4 Low Headroom Unit H180 - Track H1/SS - 2 H94 - H102SS/94 - H106HSS/94 - B180

32 47 47 H1/SS Face Fix H180 Track NOT TO SCALE 23 4 MIN. 4 3 MIN. 0 to MAX MIN. to 9 9 MAX. 12 H106HSS/94 MAX. MIN. 119 H180 Track Cutout for Low Headroom Unit H106HSS/ MAX. MIN. 3 to 1 HH/SS Double Face Fix H10SS/94 3 to 10 1 H94X H94PSC H106HSS/ H102SS/ H94X 3 to MIN 7 MA 19 MIN 32 MA B180B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

33 PACER straight sliding top hung systems For top hung sliding timber and metal doors. Max. 0kg. APPLICATION Ideally suited to shop fronts, offices and other stylish interiors Designed for straight sliding doors in timber, aluminium or metal DOOR SPECIFICATION Track System pacer For Individual Doors: Max Door Weight 0kg Max Door Width 00mm Door Thickness -mm* Max Door Height 3000mm * For doors thicker than mm, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H600 Aluminium (00, 3000, 4000 & 6000mm lengths) s H1B Face fixed H1BX Jointing and end bracket s (2 per door) H2B H6B H6BX H7B Timber Doors angle plate fixing Metal Doors angle frame Metal Doors box frame Timber/Metal Doors concealed fixing Clip Stop H601P Adjustable retaining stop s H102SS/94 Timber doors - wall mounted and multiple run guide H104PX/89 Metal door - box section H104P/89 Metal door - angle frame H10SS/94 Timber doors - face mounted guide H106HSS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H89SS Stainless steel (00 & 3000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Fascia HF160 Anodised aluminium for soffit fixed applications (00, 20, 3000, 30, 4000 & 6000mm lengths) HF0 Anodised aluminium with standard return for face fixed applications (00, 20, 3000, 30, 4000 & 6000mm lengths) H601 - Clip Stop IMAGE COMING SOON H1BX - IMAGE COMING SOON H2B - H6BX - H10SS/94-10 H104PX/89 - H600 - Track IMAGE COMING SOON H1B - H6B - H7B - H94 - H104P/89 - H102SS/94 - H106HSS/94 - B190

34 48 H1B 00 0 Face Fix NOT TO SCALE 12 H/SS HH/SS 2 6/2/SS 104P/ MIN - 24 MAX 34 MIN - 6 MAX H106HSS/ MAX. MIN to to H7B H89SS 3 to H94PSC MAX. MIN H2B H6B H104P/89 6 MIN. 16 MAX. to 1 H/SS HH/SS 2 HH/SS 6X/2/SS 2 H106HSS/94 3/2/SS 104PX/ SS/94 18 MIN H102SS/94-24 MAX 34 MIN - 6 MAX 94X 88 H104PX/89 H MAX. 12 to to to to MAX. MAX. H106HSS/ to to MAX. 10 H94X 34 MIN. 7 MAX. 19 MIN. MIN. H1B Face Fix MIN. H6BX MIN. 6 MIN. 1 6 to MAX. 1 H10SS/94 B190B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

35 6 SOLTAIRE 2 straight sliding top hung systems For top hung sliding doors. Max 2kg each. APPLICATION Manufactured from high grade 6 stainless steel with anodised aluminium track This reliable system is extremely durable and ideal for coastal applications, heavy use or areas requiring a high level of corrosion resistance Designed for interior and exterior doors up to 2kg Ideal for residential or commercial applications Designed to accommodate single or multiple panels on one or more tracks s available for timber or metal doors The track can be soffit fixed or face fixed to give flexibility of installation DOOR SPECIFICATION Track System Soltaire 2 For Individual Doors: Max Door Weight 2kg Door Thickness -48mm* Max Panel Height 3300mm * For doors thicker than 48mm, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H2A Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 900mm centres (maximum) Brush Strips BS10, BS1, Available in black in 4 brush heights, by the metre BS, BS (mm) s H1/SS Face fixed stainless steel HH/SS Double face fixed stainless steel (heavy) Starting mm from end of track fix at 900mm maximum centres. s H2/2/SS Timber doors angle plate fixing (2 per door)* H3/2/SS Timber doors saddle plate fixing H6/2/SS Metal doors angle frame fixing H6X/2/SS Metal doors box frame fixing H7/2/SS Timber doors concealed plate fixing H7/2/SS Metal doors concealed plate fixing * Each panel must be rigid enough to be supported by only two hangers Track Stop HH/SS Anodised aluminium with rubber buffer s H102SS/94 Timber doors - wall mounted and multiple run guide H104PX/89 Metal door - box section H104P/89 Metal door - angle frame H10SS/94 Timber doors - face mounted guide H106HSS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H89SS Stainless steel (00 & 3000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Interlocking Seal H9BZ/4800 H9CA/4800 Bronze anodised (4800mm to suit typical 2400mm door height) Clear anodised aluminium (4800mm to suit typical 2400mm door height) Drilled and countersunk. Includes brush seal. Refer to Components Section for more information Ø10 HH/SS - Track Stop H3/2/SS - 39 H2/2/SS H10SS/94 - IMAGE COMING SOON ,0 HH/SS H7/2/SS Ø H6/2/SS - M10 82 H6X/2/SS - M H94 - H2 - Track 10 H1/SS - H104PX/ Ø16 H102SS/94-1 H104P/89 - H106HSS/94 - B Ø

36 6 1/SS HH/SS /2/SS 106HSS/94 94X 6 B0B 0 NOT TO SCALE H106HSS/94 H/SS 1/SS H1/SS Face Fix HH/SS MAX. 12 to 28 2 HH/SS 13 MAX. 2 1 H7/2/SS 2/2/SS MAX MIN. 3/2/SS 7 MAX H/SS 6X/2/SS HH/SS 19 MIN. MIN. MIN. H3/2/SS 32 MAX. 12 to MAX. MAX. HH/SS 2 MIN. MIN. * 106HSS/94 3/2/SS 104PX/89 MIN. 94X 89 10SS/94 18 MIN - 24 MAX 3 MIN. 10 MAX. 34 MIN - 6 MAX 94X 3 to H104PX/89 H89 H94PSC H2/2/SS 12 to 28 MAX. HH/SS Double Face Fix to MAX. MAX. ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax H1/SS Face Fix SS/94 6/2/SS 104P/ MIN. 1 6 to MAX. 1 H106HSS/94 * For doors thicker than 48mm, please contact our technical sales team for 10 further information. HH/SS H106HSS/94 94X H102SS/94 18 MIN - 24 MAX 34 MIN - 6 MAX MIN. MIN. 48 MIN. 12 H89SS 88 H6/2/SS 10 H94X MAX. MAX. 12 to H6X/2/SS MIN. MIN. H104P/89 6 MIN. 16 MAX. to 1 MIN. H10SS/94 DRAFT

37 6 SOLTAIRE low headroom 2 straight sliding top hung systems For timber top hung sliding doors. Max 2kg. APPLICATION Designed to create a modern minimalist finish with all parts concealed Can reduce the clearance between the track and the top of the door to 2mm Vertically adjustable sliding door kit for low or restricted headroom applications Used to maximise door height Engineered for easy installation and adjustment Designed to accomodate single or multiple panels on one or more tracks DOOR SPECIFICATION Track System low Headroom 2 For Individual Door Leaves: Max Door Weight 2kg Door Thickness -48mm* Max Door Height 3300mm * For doors thicker than 48mm, please contact our technical sales team for further information. STANDARD PACK Pack comprises of 2x Low Headroom units, 2x end caps, 2x track stops, all screws and fitting instructions. Pack No. application HLH2 1 door pack HARDWARE SPECIFICATION Track H2A Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) Soffit fix spacing 900mm centres (maximum) s H1/SS Face fixed stainless steel HH/SS Double face fixed stainless steel (heavy) Starting mm from each end of track fix at 900mm centres (max.) Track Stop HH/SS Anodised aluminium with rubber buffer s H102SS/94 Timber doors - wall mounted and multiple run guide H10SS/94 Timber doors - face mounted guide H106HSS/94 Timber doors - concealed fixing with SS bearing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) Accessories Interlocking Seal H9BZ/4800 H9CA/4800 Bronze anodised (4800mm to suit typical 2400mm door height) Clear anodised aluminium (4800mm to suit typical 2400mm door height) Drilled and countersunk. Includes brush seal. Refer to Components Section for more information HH/SS - Track Stop H2 - Track 6 Ø10 H1/SS - HH/SS - Low Headroom Unit H94-10 H10SS/ , H102SS/94 - H106HSS/94 - B0

38 H1/SS Face Fix H2 Track 6 NOT TO SCALE 23 MIN MIN. 10 MAX. 3 to 1 H106HSS/94 2 MIN. 9 MAX MAX. MIN. H106HSS/94 HH/SS 3/2/SS 12 H2 Track SS/94 94X MAX. MIN. 3 to 1 HH/SS Double Face Fix H94PSC H106HSS/94 88 H10SS/94 3 to 10 1 H94X 88 MAX. H102SS/94 MIN. 72 MIN. 3 to MIN 7 MA 19 MIN 32 MA H94X B0B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

39 FLEXIROL 0 straight sliding top hung systems For top hung sliding timber and metal doors. Max. 0kg. APPLICATION Ideally suited to hotels, conference centres, shop fronts, showrooms or any site requiring high performance and an attractive finish Designed for straight sliding doors in timber, metal or glass DOOR SPECIFICATION Track System Flexirol 0 For Individual Doors: Max Door Weight 0kg. 2 s per leaf. Max Door Width 6000mm Door Thickness mm* Max Door Height 6000mm * For doors thicker than 100mm, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H Anodised Aluminium (00, 3000, 4000 & 6000mm lengths) See Components Section for full range of finishes s H1A/ Face fixed H3S/ Soffit fixed s H6 Metal doors - angle frame fixing (2 per door)* H6/2 Timber doors - angle plate fixing H6/7 Timber doors - concealed plate fixing * Each panel must be rigid enough to be supported by only two hangers Track Stop H3/301 Flexirol track stop s H104N/94 Metal doors - angle frame fixing H104NX/94 Metal doors - box frame fixing H106HSS/94 Timber doors - concealed fixing s H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94P Polypropylene (00, 3000, 4000 & 6000mm lengths) H94PSC Aluminium supporting channel and polypropylene (00, 3000, 4000 & 6000mm lengths) H - Track H1A/ - H3S/ - H6 - H6/2 - H6/7 - H94 - H104P/89 - H104PX/89 - H106HSS/94 - B2

40 MINIMUM THICKNESS FOR A TIMBER DOOR WHEN USING MOUNTING ANGLE PLATE 100 NOT TO SCALE Minimum MINIMUM clearance CLEARANCE H1A/ H6/61 Minimum thickness MINIMUM for a THICKNESS timber door FOR A TIMBER DOOR WHEN when USING using MOUNTING ANGLE Mounting PLATE Angle Plate HSF190C Flushbolt H6/ HR/94 H Track H6 H94PSC H3S/ H106HHSS/94 B2B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax

41 10 straight sliding 290 straight sliding top hung systems For timber or metal top hung sliding doors. Max 1 or 0kg APPLICATION Designed for commercial and industrial applications Designed to accomodate single or multiple panels on one or more tracks Versatile range of hanger, track, bracket and guide options, allows the 290 system a wide range of applications Where doors are fitted externally, a canopy is recommended DOOR SPECIFICATION Track System 290 For Individual Doos: Max Door Wt Nylon 1kg Max Door Wt Steel 0kg Door Thickness -48mm Max Door Height 3000mm HARDWARE SPECIFICATION Track H290 Galvanised Steel (00, 20, 3000, 4000 & 6000mm lengths) Fix spacing at 900mm centres (maximum) s Aluminium Steel (Zinc plated) H1A/290 H1/290S Face fix, single track H3A/290 - Soffit fix, single track H4A/290 - Soffit fix (in line), single track - H4R/290S Soffit fix (adjustable), single track H/290 - Face fix, double track H9A/290 - Face fix (low headroom), single track Refer to Components Section for closed and jointing bracket options s 1kg 0kg (2 per door)* H2K/N H2K/S0 Timberdoors - angle plate fixing H3K/N H3K/S0 Timber doors - apron fixing H7K/N H7K/S0 Timber doors - concealed fixing H6K/N H6K/S0 Metal doors - angle frame H6KX/N H6KX/S0 Metal doors - box frame H7K/N H7K/S0 Metal doors - concealed plate - All hangers suffixed N have silent running nylon wheels and S have steel wheels. - Nylon wheeled hangers should not be used on installations involving temperatures exceeding 80 C * Each panel must be rigid enough to be supported by only two hangers s HD Wall guide, double HS Wall guide, single H104P/89 Metal doors angle frame H104PX/89 Metal doors box frame H10R/89 Timber doors H106R/94 Timber doors concealed fixing H1 Ground stay roller s H89 Galvanised steel (00, 3000 & 4000mm lengths) H94X Aluminium (00, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths) Pre-drilled and countersunk for wood or lugging into concrete. H290 - Track H4A/290 - H9A/290 - H6KX - H104PX/97 - H89 - H4R/290S - H1A/290 - H2K H4R/290SB - H6K - H3K - H7K - H10R/89 - Ø H1-1 H1/290S - HA/290 - H104P/97 - H106R/89 - HD - HS - B230

42 MAX H3A/ H/ Ø H1A/290 A/290 H290 Track A/290EC 290 MIN MAX to Ø8 Ø8 B230B NOT TO SCALE H106R/ MIN MIN 40 MAX MAX MIN to 28 MAX 3K/N 28 or 3K/S Ø MIN MIN 40 2 MAX MAX MIN MAX to ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax A/290 1A/290EC H7K 290 HH3/290 4A/290 1A/290EC 6K/N or 6K/S 290 HH3/290 6K/N or 6K/S 104P P 89 HH3/ R 89 H290 Track H6K Ø17 H104/89 H89 24 MIN MAX 2 40 MAX Ø MIN 2 MAX Ø10. H6KX 4 MIN 22 MAX to to MAX (Adjustable distance) H3K H4A/ MIN 40 MAX 2 H9A/290 Concrete Lug HS 40 H2K 24 H104PX/89 H1 10 MIN 40 MAX 2 MIN 22 MAX 22 to NOTES: 1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE W 2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 1Kg. 3. ALL DIMENSIONS ARE IN MILLIMETER. Description: STRAIGHT SLIDING DOUBLE RUN TIMBER PCH-code: CAD-scale: techincal@pchend Drawing-size: Revision: /A/3K/106R/ A0 A MIN 22 MAX 28 4 H89 6 Telephone :

43 Description: PCH-code: CAD-scale: Drawing-size: Revision: M Description: PCH-code: CAD-scale: Drawing-size: Revision: Description: PCH-code: CAD-scale: P.C.HENDERSON Drawing-size: LIMITED, BOWBURN, DURHAM DH6 NG ENGLAND Telephone: (0191) Fax No.: (0191) Revision: A4 A M P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 NG ENGLAND Telephone: (0191) Fax No.: (0191) Description: PCH-code: CAD-scale: Drawing-size: Revision: A4 A 1 P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 NG ENGLAND Telephone: (0191) Fax No.: (0191) P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 NG ENGLAND Telephone: (0191) Fax No.: (0191) Description: PCH-code: CAD-scale: Drawing-size: Revision: A4 A 42 M16 P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 NG ENGLAND Telephone: (0191) Fax No.: (0191) straight sliding 301 straight sliding top hung systems For timber or metal top hung sliding doors. Max 300, 400 or 4kg APPLICATION Designed for commercial, industrial and agricultural applications Designed to accomodate single or multiple panels on one or more tracks Versatile range of hanger, track, bracket and guide options, allows the 301 system to be used in a wide range of applications Where doors are fitted externally, a canopy is recommended Suitable for Fire Resistant applications DOOR SPECIFICATION Track System H For Individual Doors: Max Door Wt Nylon 400kg 4kg Max Door Wt Steel 300kg 360kg Door Thickness 43-7mm* 43-7mm* Max Door Height 3600mm 40mm * For doors outside the recommended door thickness, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H301 or H301H Galvanised Steel (00, 20, 3000, 4000 & 6000mm lengths) Fix spacing at 900mm centres (maximum) s Aluminium Steel (Zinc plated) H1A/301 H1/301S Face fix, single track H3A/301 H3/301S Soffit fix, single track H4A/301 H4/301S Soffit fix (in line), single track - H4R/301S Soffit fix (adjustable), single track H/301 - Face fix, double track H6/301 - Soffit fix, double track - H7/301S Face fix, triple track - H8/301S Soffit fix, triple track - H9/301S Face fix (low headroom), single track Refer to Components Section for closed and jointing bracket options s Steel wheels Nylon wheels (2 per door)* H2A/S H2A/N Timberdoors - angle plate fixing H3A/S H3A/N Timber doors - apron fixing H6A/S H6A/N Metal doors - angle frame H6AX/S H6AX/N Metal doors - box frame H7A/S H7A/N Timber/metal doors - concealed plate - All hangers suffixed N have silent running nylon wheels and S have steel wheels. - Nylon wheeled hangers should not be used on installations involving temperatures exceeding 80 C * Each panel must be rigid enough to be supported by only two hangers s HD Wall guide, double HS Wall guide, single H102/97 Timber doors H104P/97 Metal doors angle frame H104PX/97 Metal doors box frame H106R/97 Timber doors concealed fixing H1H Ground stay roller H128 Shoe guide All steel parts are electro zinc-plated. s H97 Galvanised steel (1800, 00, 20, 3000, 4000 & 6000mm lengths) 2A HANGER A4 A Pre-drilled for lugging into concrete and for use in drainage funnel. n6 H4A/301 - H6A/ H2A H6AF - 3A HANGER A4 A H104P/97-6AF HANGER H301 - Track H106R/97-16 n6 H1A/301 - H4R/301S - H7/301S - H3A - H7A - 18 M16 H1H AX HANGER 3, H3A/301- HA/301 - H8/301S - H6/AX H102/97 6A HANGER - HD H128 - H4/301S - HR/301S - H6A - 8 n6 HS - M16 42 H104PX/97 - B240

44 A 3A Ø14 H1A/ HA/ A EC 301(H) HH3/301 6A/N OR 6A/S ø14 104P B240B MAX 900 NOT TO SCALE EC 301(H) HH3/301 7 HH3/ H106/97 ø14 H97 97 MIN 32 MAX 32 to A/N OR 3A/S 106R 97 Ø11 6A 104P EC 301(H) HH3/ A/N OR 6A/S 104P MIN 43 MAX MIN MAX to DESCRIPTION?_ PCH_CODE?_001 techincal@pchenderson.com MIN 32 MIN to 32 6 to MAX 6 MAX 18 H DESCRIPTION?_001 NOTES: 1. DRAWING IS FOR 98 MAX REFERENCE 98 MAX PCH_CODE?_001 AND SUBJECT TO CHANGE WIT 2. APPLICATION SCALE?_001 IS OF : techincal@pchenderson.com (Adjustable TIMBER (Adjustable DOOR WEIGHT MAX 300 OR 4Kg DWG_SIZE?_ ALL DIMENSIONS ARE IN MILLIMETER. REVISION?_001 Telephone : distance) distance) 3 MIN 43 MAX 7 MIN MAX to Description: ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New 301(H) Zealand - STRAIGHT SLIDING DOUBLE RUN TIMBER Within New Zealand: Tel Fax Outside New Zealand: Tel PCH-code: Fax (H)/A/3A/106R/ CAD-scale: techincal@pchenderson.co Drawing-size: A0 Revision: A Telephone : (H) EC 6A/N OR 6A/S MIN 43 MIN 43 MAX ø14 Ø14 H3A/301 H to 13 H301 Track H6AX H3A H4A/301 H104/97 301(H) 3A EC HH3/301 6A/N OR 6A/S 104P 97 Ø11 Ø14 NOTES: 1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE. 2. APPLICATION IS OF METAL DOOR WEIGHT MAX 300 OR 4 Kg. 3. ALL DIMENSIONS ARE IN MILLIMETERS. Description: PCH-code: CAD-scale: Drawing-size: Revision: H102/97 H SCALE?_001 DWG_SIZE?_001 REVISION?_001 MIN 43 MAX ø14 H6A H104PX/97 Telephone : H3A H6A/301 H6A MIN 43 MAX 7 24 H299 Rail 27 NOTES: 1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE. 2. APPLICATION IS OF METAL DOOR WEIGHT MAX 300 OR 4 Kg. 3. ALL DIMENSIONS ARE IN MILLIMETERS. Description: PCH-code: CAD-scale: Drawing-size: Revision: MIN MAX MIN 43 MAX to H HD 40

45 straight sliding 30 straight sliding top hung systems For timber or metal top hung sliding doors. Max 700kg. APPLICATION Used in commercial, industrial and agricultural applications where robust gear is required Designed to accomodate single or multiple panels on one or more tracks Designed for interior and exterior applications Versatile range of hanger, track, bracket and guide options, allows the 30 system a wide range of applications Where doors are fitted externally, a canopy is recommended Suitable for Fire Resistant applications DOOR SPECIFICATION Track System 30 For Individual Doors: Max Door Wt Steel 700kg Door Thickness 43-7mm* Max Door Height 4800mm * For doors outside the recommended door thickness, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H30 Galvanised Steel (00, 20, 3000, 4000 & 6000mm lengths) Fix spacing at 900mm centres (maximum) s H1A/30 Face fix aluminium, single track H3A/30 Soffit fix aluminium, single track H4A/30 Soffit fix (in line) aluminium, single track H4R/30 Soffit fix (adjustable) steel, single track H/30 Face fix aluminium, double track H9A/30 Face fix (low headroom) steel, single track Refer to Components Section for closed and jointing bracket options Fire Door s H1/30 Face fix cast iron, single track H1/30L Face fix cast iron closed left, single track H1/30R Face fix cast iron closed right, single track H1X/30 Face fix cast iron jointing, single track s H2C/S Timber doors - angle plate fixing (2 per door)* H3C/S Timber doors - apron fixing H6C/S Metal doors angle frame H6CX/S Metal doors box frame H7C/S Timber/metal doors - concealed fixing * Each panel must be rigid enough to be supported by only two hangers s HD Wall guide, double HS Wall guide, single H102/97 Timber doors H104P/97 Metal doors angle frame H104PX/97 Metal doors box frame H106/97 Timber doors concealed fixing H1H Ground stay roller H128 Shoe guide All steel parts are electro zinc-plated. s H89 Galvanised steel (00, 3000 & 4000mm lengths) H97 Galvanised steel (00, 3000, 4000 & 6000mm lengths) Rail H299 Galvanised steel (00, 20 & 3000mm lengths) H30 - Track H4A/30 - H9/30 - H6C - H102/97 - H1A/30 - H/30 - H6CF - H104P/97 - H2C - H6CX - H104PX/97 - H3A/30 - H4R/30 - H106R/97 - H3C - H7C - H1H - H128 - HD - HS - B2 14

46 MAX 900 MAX A H1A/30 H3A/ HA/ H6C R 6A EC 301(H) HH3/301 6A/N OR 6A/S 104P 97 NOT TO SCALE H106R/ ø14 Ø11 6C P MIN32 32 to 6 MAX 6 H3C 16 MIN43 43 MAX H30 Track to 13 H (H) H4A/30 H104/97 H A EC HH3/301 6A/N MIN OR 43 MAX 7 6A/S 104P MIN MAX MIN ø14 MAX to H6CX/S H104PX/ to - 13 NOTES: DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE. 2. APPLICATION IS OF METAL DOOR WEIGHT MAX 700Kg. 3. ALL DIMENSIONS ARE IN MILLIMETER. Description: 30 - STRAIGHT SLIDING SINGLE RUN STEEL PCH-code: 30/3A/6C/104P/97 CAD-scale: techincal@pchenderson.com Drawing-size: A0 Revision: A Telephone : H3C 27 3 NOTES: 1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE. 2. APPLICATION IS OF METAL DOOR WEIGHT MAX 300 OR 4 Kg. 3. ALL DIMENSIONS ARE IN MILLIMETERS. Description: Drawing-size: DESCRIPTION?_001 PCH_CODE?_001 SCALE?_001 DWG_SIZE?_001 REVISION?_ MIN H9A/30 MAX 16 Concrete Lug MAX (Adjustable distance) HD 98 MAX PCH-code: (Adjustable CAD-scale: Revision: distance) 40 MIN 43 MAX H97 H1H : techincal@pchenderson.com Telephone : H89 H6CX/S 24 H299 Rail 62 MAX to 6 MIN 6 8 MIN 43 MAX B2B ASSA ABLOY New Zealand Ltd. PO Box , North Shore, Auckland Armstrong Road, Albany, Auckland 0632, New Zealand Within New Zealand: Tel Fax Outside New Zealand: Tel Fax Description: 30 - STRAIGHT SLIDING DOUBLE RUN TIMBER PCH-code: 30/A/3C/106R/97 CAD-scale: tec Drawing-size: A0

47 90 Telephone: (0191) Fax No.: (0191) ENGLAND NG DH6 DURHAM BOWBURN, LIMITED, P.C.HENDERSON Description: PCH-code: CAD-scale: Drawing-size: Revision: A Revision: Drawing-size: CAD-scale: Description: PCH-code: A P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 NG ENGLAND Telephone: (0191) Fax No.: (0191) straight sliding 307 straight sliding top hung systems For timber or metal top hung sliding doors. Max 00kg. APPLICATION Designed to allow very heavy and large industrial doors to be easily moved Designed to accomodate single or multiple panels on one or more tracks Versatile range of hanger, track, bracket and guide options, allows the 307 system to be used in a wide range of applications Where doors are fitted externally, a canopy is recommended DOOR SPECIFICATION Track System 307 For Individual Doors: Max Door Weight 00kg Door Thickness -70mm* Max Door Height 6000mm * For panels thicker than 70mm, please contact our technical sales team for further information. HARDWARE SPECIFICATION Track H307 Steel Zinc Plated (00, 3000 & 4000mm lengths) Fix spacing at 900mm centres (maximum) s H1/307S Face fix steel, single track H3/307S Soffit fix steel, single track H4/307S Soffit fix (in line) steel, single track H4R/307S Soffit fix (adjustable), single track H/307S Face fix steel, double track H9/307S Restricted headroom face fix steel Refer to Components Section for closed and jointing bracket options s (2 per door) H3FJ H6FJ H6FJX Timber doors - apron fixing Metal doors - angle frame Metal doors - box frame s HD Wall guide, double HS Wall guide, single H102/97 Timber doors H104P/97 Metal doors angle frame H104PX/97 Metal doors box frame H106/97 Timber doors concealed fixing H1H Ground stay roller H128 Shoe guide All steel parts are electro zinc-plated. s H89 Galvanised steel (00, 3000 & 4000mm lengths) H97 Galvanised steel (00, 3000, 4000 & 6000mm lengths) Rail H299 Galvanised steel (00, 20 & 3000mm lengths) H307 - Track H3/307S - H1/307S - H4/307S - H4R/307S - H/307S - H9/307S - H6FJ Description: 3FJ HANGER PCH-code: 244 H104PX/97 CAD-scale: FJX HANGER Drawing-size: A4 Revision: 7486 A 87 M A4 A 7 H104P/97 - H6FJX - 6FJ HANGER M n88 18 H1H - H3FJ - H102/97 - H106R/ P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 NG ENGLAND Telephone: (0191) Fax No.: (0191) HD - HS - H97 - M MIN 94 MAX B0