model 111 product guide

Transcription

1 model product guide features 73 mton (80 ton) capacity 29 mton-m (2,00 ft-kips) Maximum oad Moment 57,9 m (90') eavy-ift Boom 70,m (230') Fixed Jib on eavy-ift Boom 53 kw (205 P) engine EPIC controls 82 m/min (570 fpm) line speed 89 kn (20,000 lb) line pull kg (7,500 lb) Clamshell capacity kg (7,500 lb) Dragline capacity Fast, efficient self-assembly Complete crane, maximum boom, fixed jib and counterweight ships on only 3 trucks Manitowoc CraneCARESM contents Specifications 2 Outline Dimensions 5 Transport Data 9 Crane Assembly 0 Performance Data Boom Combinations 3 Main Boom Range Diagram 4 Main Boom oad Charts 5 Fixed Jib Range Diagram 6 Fixed Jib oad Charts 7 CraneCARE 2 SM

2 specifications model 2 Upperworks System Front Drum Rear Drum Boom oist Swing System eft Crawler Engine Cummins 6CT8.3 diesel, 6 cylinder, 53 kw ( governed RPM. Manually operated disconnect clutch for cold weather starting. Multiple hydraulic pump drive transmission provides independent power for all machine functions. Optional: consult factory for other available engines. One 340 l (90 gal) capacity diesel fuel tank, mounted on rear of upperworks, with level indicator in operator s cab. Two 2 volt maintenance-free, Group 8D batteries, 55 CCA at -8 C (0 F), 2 volt starting and 30 amp alternator. Controls Modulating electronic-over-hydraulic controls provide infinite speed response directly proportional to control lever movement. Controls include Manitowoc's exclusive EPIC Electronic Processed Independent Controls system providing microprocessor driven control logic, pump control, on-board diagnostics, and service information. Block-up limit control is standard for hoist and whip lines. Integrated oad Moment Indicator system (MI) is standard for main boom, upper boom point, and fixed jib. Function cut-out or warning only operation is available via a keyed switch on the MI console. Travel and swing alarms are standard. Right Crawler ydraulic System Six high-pressure piston pumps are driven through a multi-hydraulic pump transmission. These six pumps provide independent "closed loop" hydraulic power for front drum, rear drum, boom hoist system, swing system, and both left and right crawler operation. kg/cm 2 (psi) 422 (6,000) 422 (6,000) 422 (6,000) 36 (4,500) 387 (5,500) 387 (5,500) lpm (gpm) 284 (75) 284 (75) 55 (4) 55 (4) 55 (4) 55 (4) ydraulic reservoir capacity is 568 l (50 gal) and is equipped with breather, dipstick, clean out access, and internal diffuser. Each function is equipped with relief valves to protect the hydraulic circuit from overload or shock. Replaceable, spin on ten micron (absolute) full flow line filter is furnished in the hydraulic circuit. All oil is filtered prior to return to the hydraulic reservoir. ydraulic system also includes pump transmission disconnect clutch & hydraulic oil cooler. Drums Two identical winches 483 mm(9") diameter and 543 mm (2-3/8") wide are driven by independent variable displacement axial piston hydraulic motors through planetary reduction mounted on separate front and rear shafts with anti-friction bearings. Powered lowering standard with automatic (spring applied, hydraulically released) multi-disc brakes and drum rotation indicators. Optional free-fall for front and/or rear drum(s). Includes internally expanding clutch assembly and external contracting band brake manually applied by foot pedal with locking latch in operator s cab. Operator may select free-fall or powered lowering mode using a selector switch. Note: Free-fall drums are required for clamshell/dragline operations. Optional auxiliary (third) hydraulic powered drum rated at 66,7 kn (5,000lb) line pull for third line over upper boom point, mounted on front of rotating bed. Includes third sheave for boom top wire rope guide and boom butt wire rope guide. Optional auxiliary drum rated at 66,7 kn (5,000 lb) line pull as described above, mounted in boom butt. Optional auxiliary drum preparation includes electric wiring and hydraulic plumbing. Optional bolt-on liftcrane lagging. Optional bolt-on clamshell lagging. Optional wire rope for various applications (see page 2).

3 specifications Boom oist Independent two-drum boom hoist with grooved drums including 3, m (430') of 5,8 mm (5/8") diameter wire rope reeved with 0 parts of line. Drums are powered by a fixed displacement hydraulic motor coupled to an internal brake and planetary gearbox equipped with ratcheting pawl. Boom hoist speed: raise 57,9 m (90') full main boom from in 80 seconds. Swing System igh strength fabricated steel alloy rotating bed is mounted on,64 m (64-3/4") diameter turntable bearing. Independent swing powered by a fixed displacement hydraulic motor coupled to a planetary gearbox with internal brake. 360 positive swing lock. Swing system maximum speed: 3.6 rpm. Counterweight Total standard upper counterweight assembly is kg (44,000 lb) consisting of one inner kg (28,500 lb) counterweight and one outer kg (5,500 lb) counterweight. During self-assembly, the crane boom butt and hoist are used to lift the counterweights up onto lugs at the rear of the rotating bed upperworks via a tethered remote control. The counterweights are then secured in place by two hydraulic pins for fast, safe assembly. Optional Series B counterweight system consisting of one kg (5,700 lb) center counterweight box and two carbody counterweights at 85 kg (4,000 lb) each. Includes connecting pins, retaining bolts, and washers. Operator s Cab Fully enclosed and insulated steel module mounted to the left front corner of rotating bed. Module is equipped with sliding door, large safety glass windows on all sides and roof. Signal horn, cab space heater, front and roof windshield wipers, dome light, sun visor and shade, fire extinguisher and air circulating fan are standard equipment. Optional air conditioning for operator s cab. Optional nylon protective window covers for operator s cab. Attachments No. eavy ift Main Boom The base liftcrane comes standard with a 2,2 m (40') No. Basic eavy-ift tubular chord boom consisting of 6,4 m (2') butt and 5,8 m (9') open throat top with four 50,8 cm (20") diameter roller bearing sheaves on one shaft. The basic heavy-lift boom also includes a boom angle indicator, pendant rigging, cushioned boom stops, and automatic boom hoist stop. 4,7 m (5' 6") gantry and telescopic backhitch with sealed anti-friction bearings and nylon sheaves in gantry and equalizer system. Optional No. 3,0 m (0'), 6, m (20'), and 9, m (30') main boom inserts with pendants. Optional detachable upper boom point with one 50,8 cm (20") roller. No. Fixed Jib Optional No. Basic Fixed Jib 9, m (30') length. Consisting of 4,6 m (5') jib butt and 4,6 m (5') jib top with 3,7 m (2') jib strut, pendants and backstay. Optional No. Fixed Jib Inserts 3,0 m (0 ). Utilize up to three fixed jib inserts in combination with the No. Basic Fixed Jib for total lengths of 2,2 m (40'), 5,2 m (50'), and 8,3 m (60'). model 3

4 specifications model 4 owerworks Carbody Steel fabricated carbody with wide flange wings for mounting to crawler side frames. Two variable displacement travel motors driven through planetary gearboxes provide narrow-profile mounting within the crawler modules. Crawlers Crawler assemblies are 5,9 m (9' 4") long with 9,4 cm (36") wide triple grouser crawler pads. Excavator-type crawlers have full counter-rotation capability. ydraulic extension/retraction of crawler assemblies with tethered remote control. Maximum ground speed of 2,4 kph (.5 mph). Optional crawler handling package includes a high capacity wire rope guide mounted in the boom butt, sheave frame that attaches to the boom butt, single sheave 20 mton (22 ton) self-assembly block for 22 mm (7/8") or 3 mm (-/4") wire rope, and four,8m (6' 0") nylon eye round slings. Optional Equipment Blocks and hooks mton (2 ton) Swivel hook with 336 kg (740 lb) weight ball mton (2 ton) Non-swivel hook with 336 kg (740 lb) weight ball 27 mton (30 ton) hook block with 2 sheaves, 22 mm (7/8") wire rope grooves 36 mton (40 ton) hook block with 2 sheaves, 22 mm (7/8") wire rope grooves 45 mton (50 ton) hook block with 3 sheaves, 22 mm (7/8") wire rope grooves 54 mton (60 ton) hook block with 3 sheaves, 22 mm (7/8") wire rope grooves 64 mton (70 ton) hook block with 4 sheaves, 22 mm (7/8") wire rope grooves 73 mton (80 ton) hook block with 4 sheaves, 22 mm (7/8") wire rope grooves US Standard Tool Kit Includes all US tools required for routine maintenance (with the exception of a torque wrench). ydraulic Test Kit Required to properly analyze the performance of the EPIC control system. Service Interval Kits For the regularly scheduled maintenance of general crane operations. ighting Packages Consult Factory for available options. Special Paint In colors other than Manitowoc standard red and black. Special Customer Decals Custom vinyl decal(s) of name and/or logo from artwork supplied by customer. Export Packaging Basic crane, boom and jib sections. Additional Applications Clamshell: Includes tagline, boom point roller guide, two 5,9 cm (20-7/6") laggings for 22 mm (7/8") wire rope, and pressure rollers for both front and rear drums. Dragline: Includes fairlead, boom point roller guide, two 5,9 cm (20-7/6") laggings for 22 mm (7/8") wire rope, and pressure rollers for both front and rear drums. Pile Driving: Includes shaft for attachment of fixed pile leads.

5 outline dimensions 5 model

6 outline dimensions 6 Basic Crane x ength 2,5 m 40' " Width (retracted) 3,6 m ' 0" eight 3,5 m ' 6" Weight kg 86,700 lb Note: Weight includes crawlers, carbody, and upperworks with hydraulic fluid, half tank of fuel, standard wire rope, gantry, and boom butt. B Basic Crane x with crawlers removed ength 2,6 m 4' 2" Width 3,3 m 0' 9" eight 3,3 m 0' 7" Base 2,6 m 8' 7" Weight kg 56,820 lb Note: Weight includes carbody, and upperworks with hydraulic fluid, half tank of fuel, standard wire rope, gantry, and boom butt. W W Crawlers x 2 ength 5,9 m 9' 4" Width 0,9 m 3' 0" eight, m 3' 7" Weight kg 4,940 lb model Boom top x ength 5,8 m 20' 0" Width,3 m 4' 4" eight,7 m 5' 5" Weight 980 kg 2,62 lb

7 outline dimensions Inner Counterweight x ength 3,7 m 2' 0" Width 0,9 m 2' 9" eight,9 m 6' " Weight kg 28,500 lb 7 W Outer Counterweight x ength 3,7 m 2' 0" Width 0,7 m 2' 2" eight,9 m 6' " Weight kg 5,500 lb W Mid Counterweight - Series B x ength 3,7 m 2' 0" Width 0,4 m ' 3" eight,9 m 6' " Weight kg 5,700 lb W W Carbody Weights - Series B x 2 ength,3 m 4' 3" Width 0,6 m ' 0" eight 0,6 m ' " Weight each 84 kg 4,000 lb W ook block Capacity 73 mt 80 t ength,5 m 5' 0" Weight 863 kg,899 lb Width 0,6 m 2' " Capacity 63,4 mt 70 t ength,4 m 4' 8" Weight 67 kg,477 lb Width 0,6 m 2' " Capacity 54,4 mt 60 t ength,3 m 4' 4" Weight 636 kg,400 lb Width 0,6 m 2' " Capacity 45,4 mt 50 t ength,3 m 4' 4" Weight 595 kg,30 lb Width 0,6 m 2' " Capacity 36,3 mt 40 t ength,2 m 4' " Weight 590 kg,300 lb Width 0,6 m 2' " Capacity 2 mt 30 t ength, m 3' 9" Weight 535 kg,78 lb Width 0,6 m 2' " Optional model

8 outline dimensions 8 No. Main Boom 3, m (0') Insert & Pendants x, 2 ength 3, m 0' 4" Width,3 m 4' 4" eight,3 m 4' 4" Weight 363 kg 800 lb No. Main Boom 6, m (20') Insert & Pendants x ength 6, m 20' 4" Width,3 m 4' 4" eight,3 m 4' 4" Weight 62 kg,348 lb No. Main Boom 9,2 m (30') Insert & Pendants x, 2, 3 ength 9,2 m 30' 4" Width,3 m 4' 4" eight,3 m 4' 4" Weight 847 kg,865 lb No. Fixed Jib 9,2 m (30') Strut & Pendants x ength 9,3 m 3' 4" Width 0,7 m 2' 4" eight,3 m 4' " Weight 728 kg,604 lb No. Jib Inserts 3, m (0') Strut & Pendants x, 2, 3 ength 3,2 m 0' 3" Width 0,7 m 2' 4" eight 0,6 m ' 0" Weight 05 kg 232 lb model D Upper Boom Point x ength,3 m 4' 2" Width 0,7 m 2' 2" eight 0,6 m ' 9" Weight 53 kg 338 lb Weight Ball Capacity/Swivel 3,6 mt 2 t Diameter 0,5 m ' 6" Weight 336 kg 740 lb ength,2 m 4' 0" Capacity/Non-Swivel 3,6 mt 2 t Diameter 0,5 m ' 6" Weight 336 kg 740 lb ength,2 m 4' 0" Optional

9 transport data Trailer oad Out Summary Model Series B 48,8 m (70') No. Main Boom 8,3 m (60') No. Fixed Jib Item No. Basic Crane with Crawlers Standard Outer Counterweight Weight Quantity on each Item Trailer oad # Trailer oad # kg (lb) (86,700) (5,500) Shipping Details Two of the trailers used must be of a step-deck style. The trailer hauling the crane is usually a gooseneck style hydraulic lift low boy. Use of good quality wooden blocks, braces and spacers is recommended. Securing the load properly will create a stable and strong structure for safe shipping. 9 Standard Inner Counterweight Series B Middle Counterweight Series B Carbody Counterweight 9,2 m (30') No. Boom Insert, Pendants 6, m (20') No. Boom Insert, Pendants 3,0 m (0') No. Boom Insert, Pendants (28,500) (5,700) 84 (4,000) 847 (,865) 62 (,348) 363 (800) 2 2 Working Weight 2,2 m (40') No. Main Boom 48,8 m (70') No. Main Boom combined with 8,3 m (60') No. Fixed Jib kg (lb) Series B (54,30) (60,034) (40,60) (46,334) Standard Boom Top 5,9 m (9') Upper Boom Point 9,2 m (30 ) No. Fixed Jib Basic 3,0 m (0 ) No. Jib Insert, Pendants 980 (2,62) 53 (338) 728 (,604) 05 (232) 3 Typical working weight consists of: hydraulic reservoirs full, fuel half-full, drums loaded with standard lengths of wire rope, upper boom point, 73 mt (80 t) hook block, and standard weight ball. Note: Upper boom point not used with fixed jib. ook Block 73 mton (80 ton) Weight Ball Approximate Total Shipping Weight kg (lb) 863 (,899) 33 (730) Fast Self Assembly Three Trucks, Three People, Three ours Extremely well designed and utilizing efficient use of space allows the Manitowoc Model to be mobilized with only three people using three trucks in three hours - or less - with full boom and jib. model (86,700) (35,797) 7 83 (37,875)

10 crane assembly 0 model

11 performance data Wire Rope engths Boom ength 2,2 5,2 (50) Whip line Rear Drum part m (ft) (05) (25) oist line Front Drum m (ft) (400) (490) Maximum Required parts of line 8 8 oist Drums - 89 kn (20 kips) ayer ine Pull kg (lb) 0) (0) Full Power Drum - Continuous Duty Single ine Pull/Single ine Speed 2 (395) 2 3 (430) m/min (ft/min) (465) 52 (500) 5 63 (535) 6 74 (570) 8,3 2,3 24, (45) (65) (85) (580) (680) (680) ) (5,000) 4 540) (0,000) 3 (369) 05 (343) 22 (399) 2 (368) 3 (429) 9 (389) 40 (458) 20 (394) 48 (487) 22 (399) 57 (55) 23 (404) 30,5 (00) 33,5 (0) (205) (225) (245) (680) (725) (725) ) (5,000) 9 070) (20,000) 83 (272) 66 (28) 84 (276) 68 (223) 86 (28) 69 (227) 87 (286) 7 (232) 89 (29) 72 (237) 90 (296) 74 (242) (20) 8 (265) 22 (725) 4 39,6 42,7 (50) 48,8 5,8 57,9 6,0 (200) 64,0 (20) 67, (220) 70, (230) (285) (305) (325) (345) (365) (385) (405) (425) (445) (465) (485) (725) (725) (725) (725) (725) (725) (725) Auxiliary Drum - 66,7 kn (5 kips) ayer ine Pull kg (lb) 0) (0) 2 270) (5,000) 4 540) (0,000) 6 80) (5,000) Powered Drum - Continuous Duty Single ine Pull/Single ine Speed 60 (96) 59 (93) 57 (88) 54 (76) m/min (ft/min) (25) 64 (209) 62 (204) 7 (234) 70 (228) 66 (28) 4 77 (252) 75 (245) 7 (232) Wire Rope Specifications - 22 mm (7/8") Function 3.5: Safety Factor 5: Safety Factor Regular ay, 6x25 Filler Wire, Rotation Resistant, 2 60 N/mm 2 Extra Improved Plow Steel, IWRC DYFORM 34R 260 MCC Part No. 79 MCC Part No oist ine Whip ine oist ine Whip ine Minimum Breaking Strength Maximum oad Per ine Approximate Weight 36 0 kg (79,600 lb) 2, kg/m (.42 lb/ft) 36 0 kg (79,600 lb) kg (20,000 lb) 2, kg/m (.42 lb/ft) kg (06,20 lb) 2,46 kg/m (.65 lb/ft) kg (06,20 lb) kg (20,000 lb) 2,46 kg/m (.65 lb/ft) model

12 performance data 2 Maximum ength Unassisted Raising Over front of blocked crawlers m (ft) No. Main Boom & No. Fixed Jib Series B Boom Jib Boom Jib 57,9 5,8 48,8 5,2 (50) 8,3 8,3 57,9 5,8 48,8 9, 5,2 (50) 8,3 Drum Capacities - Wire Rope Front or Rear Drum 22,23 mm (7/8") Wire Rope* Auxiliary Drum 5,88 mm (5/8") Wire Rope** Front or Rear Drum 3,75 mm (-/4") Wire Rope*** Boom oist Drum 5,88 mm (5/8") Wire Rope Maximum ength No agging 250 m (89 ft) 6 ayers 80 m (264 ft) 4 ayers 43 m (470 ft) 4 ayers 3 m (430 ft) 5 ayers With agging 265 m (870 ft) 6 ayers (50) 8,3 (50) 8,3 * 5 m (6') is deducted from maximum spooling capacities for 3 dead wraps per drum or lagging for 22,23 mm (7/8") wire rope. Over side of extended crawlers m (ft) 57,9 5,8 2,2 57,9 5,8 ** 3 m (9') is deducted from maximum spooling capacities for 3 dead wraps on Auxiliary Drum for 22,23 mm (7/8") wire rope. *** 6 m (2') is deducted from maximum spooling capacities for 3 dead wraps per drum or lagging for 3,75 mm (-/4") wire rope. 48,8 8,3 48,8 2,2 (50) 8,3 (50) 8,3 Over side of retracted crawlers 48,8 (50) m (ft) 42,7 9, 39,6 8,3 NOTE: oad block, hook and weight ball on ground at start. model

13 No. Main Boom Combinations Boom ength 2,2 5,2 (50) 8,3 2,3 24,4 30,5 (00) 33,5 (0) (20) 39,6 42,7 (50) 48,8 5,8 57,9 NOTE: Shortest inserts must be mounted closest to the butt. 3,0 m (0') first, then 6, m (20') then 9, m (30'). Maximum quantity of two (2) each 3,0 m (0') inserts and one () each 6, m (20') insert can be used in any boom configuration. 2 each 3,0 m (0') inserts can be used in place a single 6, m (20') insert. Inserts & Pendants 3,0 m 6, m 9, m (0 ft) (20 ft) (30 ft) , m (30 ft) Boom Insert 9, m (30 ft) Boom Insert boom combinations 5,8 m (9 ft) Boom Top 9, m (30 ft) Boom Insert No. Fixed Jib Combinations Jib ength 9, 2,2 5,2 (50) 8,3 Inserts & Pendants 3,m (0 ft) 2 3 No. Fixed Jib 8,3 m (60 ft) 9, m (30 ft) Boom Insert 9, m (30 ft) Boom Insert 9, m (30 ft) Boom Insert 3,0 m (0 ft) Jib Insert 3,0 m (0 ft) Jib Insert 3,0 m (0 ft) Jib Insert 4,6 m (5 ft) Jib Butt 5,8 m (9 ft) Boom Top 4,6 m (5 ft) Jib Top 3 9, m (30 ft) Boom Insert No. Main Boom 57,9 m (90 ft) No. Main Boom 5,8 m (70 ft) 6, m (20 ft) Boom Insert 3,0 m (0 ft) Boom Insert 6,4 m (2 ft) Boom Butt 9, m (30 ft) Boom Insert 3,0 m (0 ft) Boom Insert 6,4 m (2 ft) Boom Butt model Model Series B No. Main Boom 57,9 m (90 ft) Model Series B No. Main Boom No. Fixed JIb 70, m (230 ft)

14 main boom range diagram 4 No. Main Boom (200) 6, ,9 5,8 5,8 57, ,8 (50) (50) 48, ,7 39,6 (20) (20) 39,6 42,7 40 EIGT ABOVE GROUND (0) 33,5 (00) 30,5 24,4 2,3 8,3 8,3 2,3 24,4 30,5 (00) 33,5 (0) (50) 5,2 5,2 (50) 2,2 2,2 model 9, 4,5 m (4' 7") TAISWING SERIES B 0,97 m (3' 2"),7m (5' 8") ROTATION 9, 2,2 5,2 8,3 2,3 24,4 30,5 33,5 39,6 42,7 48,8 (50) (00) (0) (20) (50) DISTANCE FROM CENTERINE ROTATION

15 main boom load charts iftcrane Boom Capacities - Series B Boom No. with Open Throat Top kg (49,700 lb) Counterweight kg (8,000 lb) Carbody counterweight 5,89 m (9' 4") Crawlers extended 360 Rating kg (lb) x Boom Radius 3,0 (0) 4,5 (5) 2,2 72,5 (60.0) 64,8 (39.5) 8,3 64,4 (39.5) 24,4 30,5 (00) (20) 42,7 48,8 57,9 Main Boom with Jib Series B & Jib ength Deduct from Capacity with Fixed Jib attached kg (lb) 6,0 (20) 39,9 (86.0) 22,2 (48.0) 39,9 (85.9) 22, (47.8) 39,8 (85.7) 2,9 (47.4) 39,7 (85.4) 2,8 (47.2) 2,6 (46.8) 2,5 (46.5) 20,9 (46.) 9, 2,2 5,2 (50) 730 (,600) 90 (2,000) 30 (2,500) 2,0 5, (32.8) 5,0 (32.5) 4,9 (32.2) 4,7 (3.9) 4,6 (3.6) 4,4 (3.2) 4,2 (30.8) 4, (30.4) 2,8 (27.9) 8,3 360 (3,000) 8,0 8,8 (9.2) 8,7 (8.9) 8,6 (8.6) 8,4 (8.3) 8,2 (7.9) 8,0 (7.5) 7,9 (7.) 7,8 (6.9) 24,0 5,9 (2.8) 5,7 (2.5) 5,6 (2.2) 5,4 (.7) 5,3 (.4) 5, (.0) 5,0 (0.7) 30,0 (00) 4,2 (9.) 4,0 (8.7) 3,8 (8.2) 3,6 (7.9) 3,4 (7.5) 3,3 (7.2) 36,0 (20) 2,9 (6.4) 2,8 (6.0) 2,6 (5.6) 2,4 (5.2) 2,3 (5.0) 42,0 2,0 (4.4),8 (4.0),6 (3.6),5 (3.4) 46,0 (55),5 (3.) iftcrane Boom Capacities Boom No. with Open Throat Top kg (44,000 lb) Counterweight 5,9 m (9' 4") Crawlers extended 360 Rating kg (lb) x 000 Boom 2,2 8,3 24,4 30,5 (00) (20) 42,7 48,8 57,9 Radius 3,0 (0) 72,5 (60.0) 4,5 (5) 59,3 (25.7) 59,3 (25.7) 6,0 (20) 35,9 (77.4) 35,9 (77.3) 9,9 (43.) 9,8 (42.8) 9,6 (42.5) 9,5 (42.2) 9,4 (4.9) 9,2 (4.5) 9, (4.) 2,0 8,0 24,0 30,0 (00) 36,0 (20) 42,0 3,6 (29.4) 3,4 (29.) 7,8 (7.0) 3,3 (28.8) 7,7 (6.7) 5,2 (.2) 3, (28.5) 7,6 (6.5) 5,0 (.0) 3,6 (7.8) 3,0 (28.) 7,4 (6.) 4,9 (0.6) 3,4 (7.4) 2,5 (5.4) 2,8 (27.7) (5.7) 4,7 (0.2) 3,2 (7.0) 2,3 (5.0),6 (3.6) 2,6 (27.4) 7, (5.4) 4,5 (9.8) 3,0 (6.6) 2, (4.6),5 (3.2) 2,5 (27.0) 6,9 (5.0) 4,3 (9.4) 2,9 (6.2),9 (4.2) 2,5 (26.8) 6,8 (4.8) 4,2 (9.2) 2,8 (6.0),8 (4.0) model Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

16 fixed jib range diagram 6 (240) 73, (230) 70, (220) 67, (20) 64,0 No. Fixed Jib on No. Main Boom ,2 (50) 30 8,3 67, (220) 70, (230) (200) 6,0 2,2 64,0 (20) 57,8 9, 57,9 6,0 (200) 50 5,8 48,8 (50) 42,7 39,6 39,6 42,7 (50) 48,8 5,8 40 (20) (20) EIGT ABOVE GROUND (0) 33,5 (00) 30,5 24,4 2,3 30,5 (00) 33,5 (0) 3 5 9, ,3 model (50) 5,2 2,2 9, 4,5 m (4' 7") TAISWING SERIES B 0,97 m (3' 2") ROTATION,7m (5' 8") 9, 2,2 5,2 8,3 2,3 24,4 30,5 33,5 39,6 42,7 48,8 (50) (00) (0) (20) (50) DISTANCE FROM CENTERINE ROTATION 5,7

17 fixed jib load charts iftcrane Jib Capacities - Series B Jib No. with 3,7 m (2 ft) Strut on Boom No. with Open Throat Top kg (49,700 lb) Counterweight kg (8,000 lb) Carbody counterweight 5,89 m (9' 4") Crawlers extended 360 Rating kg (lb) x 000 Boom Radius 7,6 (25) 2,3 3 Offset (20) (50) 2,3 30 Offset (20) (50) 7 0,0 Jib ength 9, m (30 ft) 2,0 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 8,9 (9.8) 5,5 (3.5) 4,5 (9.9) 8,8 (9.3) 5,4 (3.0) 4,3 (9.4) 8,5 (8.7) 5,0 (2.4) 4,0 (8.7) 2,6 (6.4) 8,3 (8.0) 4,7 (.7) 3,7 (8.0) 2,3 (5.7) (9.) 8,5 (8.6) 7,9 (7.4) 4,4 (.0) 3,4 (7.3) 2,0 (5.0) 8, (7.9) 7,6 (6.2) 6,7 (4.8) (3.0) (8.5) 7,9 (7.0) 7, (5.7) 5,5 (3.4) 8,3 (7.8) 7,5 (6.6) 5,3 (2.9) 4,2 (9.) (8.4) 7,9 (7.4) 5,0 (2.4) 3,9 (8.5) 2,5 (6.0) 7, (5.7) 4,8 (.9) 3,7 (8.0) 2,2 (5.4) 42,0 2,2 (4.7),8 (4.0),5 (3.3),7 (3.6) 46,0 (50),4 (3.3) Boom 2,3 3 Offset (20) (50) 2,3 30 Offset (20) (50) Radius 7,6 (25) 0,0 Jib ength 2,2 m (40 ft) 2,0 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 42,0 46,0 (50) (9.9) 5,6 (3.6) 4,6 (0.0) 8,8 (9.5) 5,4 (3.2) 4,4 (9.6) 3,0 (7.2) 8,6 (8.9) 5, (2.5) 4, (8.9) 2,7 (6.5) 2,2 (4.8),8 (4.2) 8,4 (8.2) 4,8 (.8) 3,8 (8.2) 2,4 (5.8),9 (4.),5 (3.5) 7,6 (6.8) 7,4 (6.4) 4,5 (.2) 3,5 (7.5) 2, (5.),6 (3.4) 6,6 (4.) 5,8 (2.9) 4,8 (.) 6,8 (4.6) 6, (3.5) 5, (.7) 4,6 (9.9) (5.2) 6,4 (4.2) 5,4 (2.5) 4,3 (9.4) 2,8 (6.8) 6,7 (4.7) 5,2 (2.8) 4, (8.9) 2,6 (6.3) 2, (4.5) (3.4) 5,0 (2.3) 3,8 (8.3) 2,3 (5.7),8 (3.9) (3.2) model Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

18 fixed jib load charts 8 iftcrane Jib Capacities - Series B Jib No. with 3,7 m (2 ft) Strut on Boom No. with Open Throat Top kg (49,700 lb) Counterweight kg (8,000 lb) Carbody counterweight 5,89 m (9' 4") Crawlers extended 360 Rating kg (lb) x 000 Boom Radius 0,0 2,3 8,8 (9.7) 3 Offset 8,9 (20) (50) 2,3 30 Offset (20) (50) 2,0 8,5 (8.7) 8,6 (9.) 8,9 (9.7) Jib ength 5,2 m (50 ft) 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 42,0 8,2 (7.8) 7,7 (7.0) 5,7 (3.7) 4,6 (0.) 8,4 (8.3) 7,9 (7.5) 5,5 (3.3) 4,4 (9.7) 3,0 (7.3) 8,7 (8.9) 8,2 (8.2) 5, (2.6) 4, (9.0) 2,7 (6.6) 2,3 (4.9) 8,9 (9.4) 8,3 (8.3) 4,9 (.9) 3,8 (8.3) 2,4 (5.9),9 (4.2) 6,9 (5.2) 6,7 (4.8) 4,5 (.3) 3,5 (7.6) 2, (5.2),6 (3.5) (3.0) 5,4 (.8) 4,3 (0.0) 4,0 (8.8) 5,6 (2.3) 4,6 (0.6) 4,3 (9.4) 5,8 (2.8) 4,9 (.3) 4,4 (9.6) 2,9 (7.) (3.2) 5, (.4) 4,2 (9.) 2,7 (6.5) 2,2 (4.7) 4,7 (0.5) 4,0 (8.6) 2,5 (6.0),9 (4.) 46,0,9 (3.7),6 (3.0),7,5 50,0,5 Boom Radius 0,0 2,3 (6.0) 3 Offset (20) (50) 5,8 2,3 30 Offset (20) (50) 5,8 2,0 7, (5.7) (6.0) (6.0) model Jib ength 8,3 m (60 ft) 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 42,0 46,0 50,0 6,9 (5.0) 6,5 (4.3) 5,7 (3.) 4,7 (0.2) 3,3 (7.8) 7,0 (5.4) 6,7 (4.8) 5,5 (3.3) 4,5 (9.7) 3, (7.3) 2,6 (5.7) (5.9) 6,9 (5.3) 5,2 (2.7) 4, (9.0) 2,8 (6.6) 2,3 (5.0),9 (3.7),6 (3.2) (6.0) 7, (5.7) 4,9 (2.0) 3,8 (8.3) 2,5 (6.0) 2,0 (4.3),6 (3.0) 6,8 (4.9) 6,6 (4.6) 4,6 (.5) 3,6 (7.9) 2,2 (5.5),8 (3.8) 4,8 (0.6) 3,7 (8.7) 3,3 (7.4) (0.9) 4,0 (9.2) 3,6 (8.0) 3, (7.) 4,2 (9.9) 3,9 (8.6) 3,0 (7.2) 2,5 (5.4) 4,3 (9.6) 4, (9.2) 2,8 (6.7) 2,3 (4.9),8 (3.5),4 4,0 (9.) 3,9 (8.7) 2,6 (6.4) 2, (4.5),6 (3.) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

19 fixed jib load charts iftcrane Jib Capacities Jib No. with 3,7 m (2 ft) Strut on Boom No. with Open Throat Top kg (44,000 lb) Counterweight 5,89 m (9' 4") Crawlers extended 360 Rating kg (lb) x 000 Boom Radius 7,6 (25) 2,3 3 Offset (20) (50) 2,3 30 Offset (20) (50) 9 0,0 Jib ength 9, m (30 ft) 2,0 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 8, (7.4) 4,8 (.8) 3,9 (8.5) 7,9 (7.0) 4,6 (.3) 3,7 (8.) 7,6 (6.3) 4,3 (0.6) 3,4 (7.4) 2, (5.3) (5.7) 4,0 (0.0) 3, (6.7),8 (4.6) (9.) 8,5 (8.6) 7,0 (5.0) 3,7 (9.3) 2,8 (6.0),5 (3.9) 8, (7.9) 7,6 (6.2) 6,7 (4.8) (2.0) 7,9 (7.0) 7, (5.7) 4,8 (.7) 8,3 (7.5) 7,5 (6.3) 4,6 (.3) 3,6 (7.9) (8.4) 7,7 (6.7) 4,3 (0.7) 3,3 (7.2) 2,0 (4.9) 7, (5.7) 4, (0.) 3,0 (6.6),7 (4.3) 42,0,7 (3.8),4 (3.) Boom 2,3 3 Offset (20) (50) 5,8 2,3 30 Offset (20) (50) 5,8 Radius 7,6 (25) 0,0 Jib ength 2,2 m (40 ft) 2,0 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 42,0 46,0 (50) 8,2 (7.6) 4,9 (.9) 4,0 (8.7) 7,9 (7.) 4,7 (.5) 3,8 (8.2) 2,5 (6.) 7,7 (6.5) 4,4 (0.8) 3,4 (7.5) 2,2 (5.4),8 (3.9),4 (3.3) 7,3 (5.9) 4, (0.) 3, (6.8),9 (4.7),5 (3.2) 8,7 (9.0) (5.4) 3,9 (9.7) 2,9 (6.4),7 (4.2) 6,6 (4.) 5,8 (2.9) 4,8 (.) 6,8 (4.6) 6, (3.5) 4,9 (.7) 3,9 (8.5) (5.2) 6,4 (4.2) 4,7 (.5) 3,7 (8.0) 2,4 (5.7) 6,7 (4.7) 4,5 (.) 3,5 (7.5) 2, (5.2),6 (3.5) (4.) 4,3 (0.7) 3,3 (7.),9 (4.8),4 (3.) model Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

20 fixed jib load charts 20 iftcrane Jib Capacities Jib No. with 3,7 m (2 ft) Strut on Boom No. with Open Throat Top kg (44,000 lb) Counterweight 5,89 m (9' 4") Crawlers extended 360 Rating kg (lb) x 000 Boom Radius 0,0 2,3 8,8 (9.7) 3 Offset 8,9 (20) (50) 5,8 2,3 30 Offset (20) (50) 5,8 Jib ength 5,2 m (50 ft) 2,0 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 42,0 8,5 (8.7) 8,2 (7.8) 7,7 (7.0) 4,9 (2.0) 4,0 (8.8) 8,6 (9.) 8,4 (8.3) 7,8 (7.2) 4,7 (.6) 3,8 (8.3) 2,6 (6.2) 8,9 (9.7) 8,7 (8.9) 7,7 (6.6) 4,4 (0.9) 3,5 (7.6) 2,3 (5.5),8 (4.0) 8,9 (9.4) 7,4 (6.0) 4, (0.2) 3,2 (6.9) 2,0 (4.8),5 (3.3) 7,7 (7.0) 7, (5.5) 3,9 (9.8) 2,9 (6.4),7 (4.3) (3.0) 5,4 (.8) 4,3 (0.0) 4,0 (8.8) 5,6 (2.3) 4,6 (0.6) 4, (8.8) 5,8 (2.8) 4,8 (.3) 3,8 (8.3) 2,5 (5.9) (3.2) 4,6 (.4) 3,6 (7.8) 2,2 (5.4),7 (3.7) 4,5 (0.8) 3,4 (7.4) 2, (5.),5 (3.4) 46,0 (50),5 (3.4) (3.) 3 Offset 30 Offset Boom 2,3 (20) (50) 48,8 2,3 (20) (50) 48,8 Radius 9, (25) 0,0 (6.0) Jib ength 8,3 m (60 ft) 2,0 4,0 (50) 8,0 26,0 30,0 (00) 38,0 (20) 7, (5.7) 6,9 (5.0) 6,5 (4.3) 5,0 (2.) 4,0 (8.8) 2,8 (6.7) (6.0) 7,0 (5.4) 6,7 (4.8) 4,7 (.6) 3,8 (8.3) 2,6 (6.2) (6.0) (5.9) 6,9 (5.3) 4,5 (0.9) 3,5 (7.7) 2,3 (5.5) (6.0) 7, (5.7) 4, (0.3) 3,2 (7.0) 2,0 (4.8) (6.0) 7, (5.8) 4, (0.0) 3, (6.7),9 (4.6) 4,8 (0.6) 3,7 (8.7) 3,3 (7.4) (0.9) 4,0 (9.2) 3,6 (8.0) 2,7 (6.6) 4,2 (9.9) 3,9 (8.5) 2,5 (6.) 4,3 (9.6) 3,7 (8.0) 2,3 (5.6) 4, (9.3) 3,6 (7.9) 2,2 (5.5) model 42,0 46,0 (50) 2,2 (4.7),8 (4.0),5 (3.4),5 (3.3),4 (3.) 2,0 (4.4),8 (3.9) (3.2),7 (3.7) (3.) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

21 SM CraneCARE CraneCARE is Manitowoc s comprehensive service and support program. It includes classroom and on-site training, prompt parts availability, expert field service, technical support and documentation for every one of the more than 7,000 Manitowoc cranes currently in use throughout the world. That s commitment you won t find anywhere else. That s CraneCARE. Service Training Manitowoc specialists work with you in our training center and in the field to make sure you know how to get maximum performance, reliability, and life from your cranes. Manitowoc Cranes Technical Training Center provides valuable multi-level training, which is available for all models and attachments, in the following format: Basic Provides technicians with the basic skills required in our evel I and II classes covering hydraulic and electrical theory and schematics, pump, motor, control, and MI operation, and the use of meters and gauges. evel one This model-specific class covers theory and offers hands-on training and trouble shooting for all crane systems. evel two This model-specific class provides in-depth coverage of all crane systems and components, and advanced troubleshooting of simulated faults. (Requires evel I.) Masters Covering all EPIC models and the 400W, this class stresses high level system knowledge and trouble shooting of simulated faults. (Requires evel II.),000 our Part No Consists of the entire 200 our Service Kit (Part No ), plus the following: ydraulic Filter in Tank (Part No ) Filter, Breather (Part No ) ydraulic Filter - Spin on (Part No ) 2,000 our Part No Consists of the entire,000 our Service Kit (Part No ), plus the following: Compressor Belt (Part No ) ydraulic Test Kit Part No Protect your investment by demanding Genuine Manitowoc Parts Service Kits. The ydraulic Service Kit consist of the following: All hydraulic fittings to access all pressures and flows ydraulic flow meters and pressure gauges to record hydraulic data. Electrical Break out harnesses to access voltages on all electrical circuits on all machines. Fluke Digital volt ohm meter, as used in all Manitowoc service literature. ydraulic Test Kit with case Part No The above kit (Part No ) plus a custom heavyduty carrying case. U.S. Standard Tools Kit Part No All standard tools needed to properly maintain and service your crane. (Does not include torque wrench.) 2 Parts Availability Genuine Manitowoc replacement parts are accessible through your distributor 24 hours a day, 7 days a week, 365 days a year. Service Interval Kits Provides all the parts required by Manitowoc s Preventative Maintenance Checklist. 200 our Part No Consists of the following: Engine Water Filter (Part No ) Primary Fuel Filter (Part No ) Secondary Fuel Filter (Part No ) Engine Oil Filter (Part No ) Primary Air Filter (Part No ) Secondary Air Filter (Part No ) model

22 SM CraneCARE 22 Field Service Factory-trained service experts are always ready to help maintain your crane s peak performance. For a worldwide listing of dealer locations, please consult our website at: Technical Support Manitowoc s dealer network and factory personnel are available 24 hours a day, 7 days a week, 365 days a year to answer your technical questions and more, with the help of computerized programs that simplify crane selection, lift planning, and ground-bearing calculations. For a worldwide listing of dealer locations, please consult our website at: Available from your Authorized Manitowoc Cranes Distributor, these VS videos are available in NTSC, PA and SECAM formats. Model Assembly Video Part No Model Operation Video Part No Model ubrication Video Part No Your Capacity Chart Video Part No Respect the imits Video Part No Crane Safety Video Part No Boom Inspection/Repair Video Part No Technical Documentation Manitowoc has the industry s most extensive documentation, and the easiest to understand, available in major languages and formats that include print, disk, and videotape. A complete set of Operator s, Parts, Capacity, Vendor, and Service Technician s Manuals are shipped with each crane. Additional copies available through your Authorized Manitowoc Distributor. Crane Operator s Manual Part No Crane Parts Manual Part No Crane Capacity Manual Part No Crane Vendor Manual Part No Service Technician s Manual (EPIC) Part No CD rom versions of the Operator s and Parts Manuals are shipped with each crane. Also available are the following CDs: model Maintenance Operation Service Parts (MOPS) CD Part No Ground Bearing Pressure Estimator CD Part No Crane Selection and Planning Software (CompuCRANE ) CD Part No Capacity Chart (all EPIC models) CD Part No

23 notes 23 model

24 Backed by Manitowoc CraneCARE SM CraneCARE is Manitowoc s comprehensive service and support program. It includes classroom and on-site training, prompt parts availability, expert field service, technical support and documentation for every one of the more than 7,000 Manitowoc cranes currently in use throughout the world. That s commitment you won t find anywhere else. That s CraneCARE. Manitowoc Cranes, Inc. P.O. Box 70 Manitowoc, WI, USA Telephone Facsimile PRODUCT IMPROVEMENTS MAY CANGE SPECIFICATIONS 2002 MANITOWOC 202--PG-US-E