IntelliTrac V2 PRODUCT GUIDE tbcconsoles.com

Transcription

1 IntelliTrac V2 PRODUCT GUIDE tbcconsoles.com

2 TABLE OF CONTENTS T SERIES...PAGE 3 FEATURES...PAGE 4 HD SERIES...PAGE 5 FEATURES...PAGE 6 FITT SERIES...PAGE 7 TURRETS AND UPPER MODULES...PAGE 8 OPTIONS AND ACCESSORIES... PAGE 9-10 CONFIGURATIONS... PAGE FINISHES... PAGE 13 TBC Consoles 170 Rodeo Drive, Edgewood, NY CONSOLE tbcconsoles.com sales@tbcconsoles.com PAGE 2

3 T Series Overview Base Frame Modules: Starter Bay Module, 19 wide (IT-SB) Running Bay Module, 19 wide (IT-RB) The T Series comes in three depths (T22, T26, and T30) to best meet each client s specific mix of technical, spatial, and operational requirements. All three depths can accommodate up 7 RU of equipment space in the base cabinet. For each of the three depths the basic building blocks of the lntellitrac console system are the Starting Bays and the Running Bays. The T Series comes in only 19 wide bay modules. These modules include: feet (as required), wire mesh cable tray, front and rear device Tracs for monitor and accessory mounting, vented and removable ABS lower cabinet doors (front & rear). Additional accessories sold separately. Note that lntellitrac consoles cannot be configured with more than one depth. But consoles of different depths can used in a control or facility with no distinguishable difference other than the depth. lntellitrac T Series is priced and designed per bay, but is manufactured according to final length (ex. 4-bay console). This is done to ensure smooth function and appearance of the extruded aluminum device tracks. Interchangeable, drop-in upper, equipment turret modules Easily removable Black HDPE doors, front and rear standard, optional keyed locks available Long support foot used on console ends only Front and Rear equipment Trac Wire mesh cable tray Console stanchions spaced 19 1/8 [488.9mm] apart for mounting optional 7RU rack rail Leveler feet used as needed on runs longer than 4-bays, and at angular transitions tbcconsoles.com sales@tbcconsoles.com PAGE 3

4 T Series Features FRONT EQUIPMENT TRAC: Extruded aluminum front trac, accepts monitor and speaker arms, and other TBC trac mount accessories, see page 8 of this product guide for more information WORKSURFACE FINISHES: Black rubber bumper edge w/plastic laminate or linoleum, available in variety of colors Purtech edge contoured ergonomic in black or gray w/ plastic laminate or linoleum, available in variety of colors Acrylic Plexiglas translucent 1 thick, available in 4 colors COUNTERTOP SUPPORT ARMS: Heavy gauge steel, supports up to 200lb (90.7 kg) load per pair CABLING ACCESS & DISTRIBUTION: Wire mesh cable trays provide even support and allows easy dropouts, can be located in multiple positions RACK RAIL: Optional front and, or rear rack rail, adjustable setback, metric, imperial, and cage nut style rails available TOE SPACE: T Series offers over 4 of toe space below the base cabinet FEET: Formed steel support foot REAR EQUIPMENT TRAC: Extruded aluminum rear trac, accepts monitor and speaker arms, and TBC monitor frame system SIDE PANELS: 3DL Thermofoil side panels at ends of console, 3 standard colors w/optional premium colors available BASE CABINET DOORS: Front & rear vented removable black HDPE panels, optional locks available. POWER DISTRIBUTION: Integrated power strip and power distribution units available in 120V and 240V versions. EQUIPMENT CLEARANCE: Maximum of 12 3/8 clear height for equipment when using drop-in bottom shelf. BOTTOM SHELF: Optional drop-in ventilated metal panel bottom shelf for equipment or CPUs to sit on, available in 2 widths. (Diagram is of a T26 but features are typical of all T Series consoles) tbcconsoles.com sales@tbcconsoles.com PAGE 4

5 rev. Dec 2018 HD Series Overview Base Frame Modules: Interchangeable, drop-in equipment turret modules Front and Rear equipment Trac Starter Bay Module, 19 wide (IT-HD-SB) Starter Bay Module, 25 wide (IT-HD-W-SB) Running Bay Module, 19 wide {IT-HD-RB) Running Bay Module, 25 wide (IT-HD-W-RB) Easily removable Black HDPE doors, front and rear standard, optional keyed locks available The HD Series was created to provide additional equipment capacity in the lower cabinet area than in the T Series. The HD Series comes in three depths (HD22, HD26 and HD30) to best meet each client s specific mix of technical, spatial, and operational requirements. All depths can accommodate up to 9 RU of equipment in the base cabinet. For all three depths the basic building blocks of the lntellitrac console system are the Starting Bays and the Running Bays. The HD Series comes in both 19 and 25 wide bay modules. These modules include: feet (as required), wire mesh cable tray, front and rear device Tracs for monitor and accessory mounting, vented and removable ABS lower cabinet doors (front & rear). Additional accessories sold separately. Note that lntellitrac consoles cannot be configured with more than one depth. But consoles of different depths can used in a control or facility with no distinguishable difference other than the depth. Wire mesh cable tray Vented metal CPU pullout shelf for 25 wide bays Long support foot used on console ends only Console stanchions can be spaced at 25 [635mm] or 19 1/8 [489mm] apart for mounting optional 9 RU rack rail Leveler feet used as needed on runs longer than 4-bays, and at angular transitions. lntellitrac HD Series is priced and designed per bay, but is manufactured according to final length (ex. 4-bay console). This is done to ensure smooth function and appearance of the extruded aluminum device tracks. HD 22 SECTION HD 26 SECTION HD 30 SECTION tbcconsoles.com sales@tbcconsoles.com PAGE 5

6 HD Series Features FRONT EQUIPMENT TRAC: Extruded aluminum front trac, accepts monitor and speaker arms, and other TBC trac mount accessories. WORKSURFACE FINISHES: Black rubber bumper edge w/plastic laminate or linoleum, available in variety of colors Purtech edge contoured ergonomic in black or gray w/ plastic laminate or linoleum, available in variety of colors Acrylic Plexiglas translucent 1 thk, available in 4 colors REAR EQUIPMENT TRAC: Extruded aluminum rear trac, accepts monitor and speaker arms, and TBC monitor frame system SIDE PANELS: 3DL Thermofoil side panels at ends of console, 3 standard colors w/optional premium colors available COUNTERTOP SUPPORT ARMS: Heavy gauge steel, supports up to 200lb (90.7 kg) load per pair CABLING ACCESS & DISTRIBUTION: Wire mesh cable trays provide even support and allows easy dropouts, can be located in multiple positions RACK RAIL: Optional front and, or rear rack rail, adjustable setback, metric, imperial, and cage nut style rails available FEET: Formed steel support foot BASE CABINET DOORS: Front & rear vented removable black HDPE panels, optional locks available POWER DISTRIBUTION: Integrated power strip and power distribution units available in 120V and 240V versions. EQUIPMENT CLEARANCE: Maximum of 20 3/8 clear height for equipment when using drop-in bottom shelf, alternate placement of power strips & cable tray may be required. BOTTOM SHELF: Optional drop-in ventilated metal panel bottom shelf for equipment or CPUs to sit on, available in 2 widths (Diagram is of a HD26 but features are typical of all HD Series consoles) tbcconsoles.com sales@tbcconsoles.com PAGE 6

7 FITT Series Features The FiTT Series is designed as an IntelliTrac console without the need for robust storage space under the countertop. The FiTT utilizes a smaller footprint than the other IntelliTrac consoles and custom turrets that incorporate brush grommets when it is necessary to cover the front trac. FRONT EQUIPMENT TRAC: Extruded aluminum front trac can be utilized (requires custom turret) WORKSURFACE FINISHES: Black rubber bumper edge w/plastic laminate or linoleum, available in variety of colors Purtech edge contoured ergonomic in black or gray w/ plastic laminate or linoleum, available in variety of colors Acrylic Plexiglas translucent 1 thk, available in 4 colors COUNTERTOP SUPPORT ARMS: Heavy gauge steel, supports up to 200lb (90.7 kg) load per pair RACK RAIL: Front 2RU rack rail standard, expansion to 3RU optional. Different style rack rail available EQUIPMENT CLEARANCE: Base frame allows for 11.9 (302 mm) rear clearance and 7.6 (193 mm) front clearance for equipment TURRETS: Modular turrets of different sizes and angles REAR EQUIPMENT TRAC: Extruded aluminum rear trac, accepts monitor and speaker arms, and TBC monitor frame system SIDE PANELS: 3DL Thermofoil side panels at ends of console, 3 standard colors w/optional premium colors available CABLING ACCESS & DISTRIBUTION: Wire mesh cable trays provide even support and allows easy dropouts, can be located in multiple positions BASE CABINET DOORS: Front & rear vented removable black HDPE panels, optional locks available FEET: Formed steel support foot with levelers Standard Silver powdercoat WIRE MANAGEMENT: Open channel leg design allows for cable pass through with side panel access tbcconsoles.com sales@tbcconsoles.com PAGE 7

8 IntelliTrac Turrets and Upper Modules (Identical for T & HD Series consoles of same depth) IT-UM-2 laminate finish; 2ru IT-UM-3 laminate finish; 3ru IT-UM-4 laminate finish; 4ru IT-UM-5 laminate finish; 5ru IT-UM-6 laminate finish; 6ru IT-UM-7 laminate finish; 7ru IT-UM-8 laminate finish; 8ru IT-UM-SS Upper sliding shelf module with grommet, black laminate finish IT-LS Lower shelf unit with grommets, black laminate finish IT-UM-Bl Bi-level upper rack module, black laminate finish Power and Wire Management Turrets removed for clear view into base. Power Strip (PS-2015-ET) shown in typical mounting location in console base. These powerstrips are also available with locking plugs (Twist-Lock), junction box for hardwire applications, 20 amp, and international versions. We can also provide Power Distribution Units with IEC 60320/ C13 outlets in 120V and 240V versions. tbcconsoles.com sales@tbcconsoles.com PAGE 8

9 IntelliTrac Options (Identical for T & HD Series consoles, additional accessories available) IT-TM/IT-HD-TM Angular transition base module IT-EXT Base extension for extra depth equipment IT-SP IT-HD-SP Thermofoil Side Panels IT-BTM Bottom closure panel / light-duty shelf, vented, drop-in. CTR-L Black bumper rubber edge w/plastic laminate or linoleum countertop, per linear foot [ 305mm]. CTR-URE Purtech urethane contoured edge w/plastic laminate or linoleum countertop, per linear foot [ 305mm]. CTR-AC 1 [25mm] thick Acrylic countertop, per linear foot [305mm]. AC-JNT Acrylic counter joints and associated hardware (necessary with seamed countertops). CTR-CO Counter cutout with rack rail or cleats. IT-PO-SHELF Rack mount pullout shelf, vented 16.S W x 18 d 419mm x 457mm CTR-SWR Switcher wedge with optional brackets for aux panel, size will depend on equipment. CTR-SWR-T Switcher Wedge with rack turrets built in, various configurations available. tbcconsoles.com sales@tbcconsoles.com PAGE 9

10 Accessories Identical or similar for T & HD Series consoles, additional accessories available TL-LITHAL-TM TL-LITLED-TM Trac mount gooseneck task light. IT-PD Trac mount power/data module. (2) 15amp recept. + (2) CAT 5 s IT-PD-USB same as above w/ (2) USBs. FP-3500 LCD arm, trac mounted, floating with fingertip height adjustment. VESA adapter plates included. Color: silver w/black trim. FP-STX LCD arm, reconfigurable, trac-mount and VESA adapter plates included. Color: silver w/black trim. IT-CC Trac mount adjustable cable collar, only applicable to T series consoles. Cable Collar (IT-CC) shown mounted in base, adjustable in x and y axes. IT-Phone Trac mount phone platform. TL-WALD Trac or Pole-mount LED Task Lamp. Also available with weighted base. IT-FP 1 Bay 2-3 drawer integrated file pedestal or 12RU rack. Additional accessories are available on our website tbcconsoles.com sales@tbcconsoles.com PAGE 10

11 IntelliTrac Configurations T22-4B-4T T22 4-Bay with (4) 4RU turrets Overall length: 7-8 [2362mm] T26-6B-6T T26 6-Bay with (6) 3RU turrets Overall length: 11-6 [3556mm] T30-8B-8T T30 4-Bay with (8) 4RU turrets Overall length: 14-8 [4495mm] HD30-5B-2T HD30 5-Bay with (2) 4RU turrets Overall length: Custom T T T26 7-Bay (7) 4RU turrets Overall length: 14-7 [4427mm] T T T26 9-Bay with (9) 2RU turrets Overall length: [5461mm] Notes: The configurations shown here are of a T26 are just a sampling of console lengths, typical to control room applications, that can be created with the lntellitrac system. Both T & HD Series consoles can be created in these same configurations including any of the various depths available. T26-2B-5T T26 2-Bay with (5) 4RU turrets Overall length: 8-10 [2692mm] T26-4B-4T T26 4-Bay with (4) 4RU turrets Overall length: 7-8 [2362mm] T26-6B-6T T26 6-Bay with (4) 4RU & (2) 4+8RU turrets Overall length: 10-7 [3238mm] See page 7 of this guide for the various rack equipment turret modules that are available. See page 8-9 of this guide for the various options and accessories that are available. tbcconsoles.com sales@tbcconsoles.com PAGE 11

12 IntelliTrac Configurations - Continued T T T26 4-bay 3- IT-SB, 1- IT-RB, with (2) 22.5 transitions, and (4) 4ru turrets, overall length: 9-8 [2928mm] T T T26 3-bay 3- IT-SB, 2- IT-RB, with (2) 22.5 transitions, and (3) 4ru turrets, overall length: 11-4 [3455mm] T T T26 3-bay 3- IT-SB, with (2) 22.5 transitions, and (3) 4ru turrets overall length: 7-11 [2402mm] Angular Transitions Working with the stock angular transitions shown below*, lntellitrac consoles can be configured in a cockpit style, to create ergonomically efficient layouts for single or multiple-operators. * Reverse-angle transitions are also available in 5, 10, and 15 versions. T T T26 6-bay 3- IT-SB, 3- IT-RB, with (2) 22.5 transitions, and (6) 4ru turrets, overall length: [3909mm] T T T26 9-bay 3- IT-SB, 6- IT-RB, with (2) 22.5 transitions, and (9) 4ru turrets, overall length: 17-9 [5400mm] Notes: T T T26 7-bay 3- IT-SB, 4- IT-RB, with (2) 22.5 transitions, and (7) 4ru turrets, overall length: 14-7 [4427mm] The configurations shown here are of a T26 are just a sampling of console lengths, typical to control room applications, that can be created with the lntellitrac system. Both T & HD Series consoles can be created in these same configurations including any of the various depths available. See page 7 of this guide for the various rack equipment turret modules that are available. tbcconsoles.com sales@tbcconsoles.com PAGE 12

13 Finishes The standard finish for TBC consoles includes a selection from any of the below plastic laminate or linoleum colors. The below samples represent color suggestions we have found to be more functional than others in the video production environment. They are more subdued with low light reflection, and would finish the horizontal surfaces of your console. The base cabinets and body of the console would be black laminate, unless you prefer another color that compliments the countertop selection. Premium finishes with additional lead time: Designer laminates such as fingerprint resistant or textured options, solid surface, polyurethane edge, and acrylic. LAMINATE LINOLEUM SOLID SURFACE ACRYLIC (PLEXI) Shale Graphite Nebula Blue Slate Grey Platinum Cobalt Blue Red 3DL THERMOFOIL SIDE PANELS DESKTOP EDGE OPTIONS Puretech Edge Bumper Edge Acrylic To view a wider selection of available finishes, please visit our website or contact us at sales@tbcconsoles.com. (side panels stocked in Shark Grey, Platinum Silver, and Matte Black) tbcconsoles.com sales@tbcconsoles.com PAGE 13