PFT-61 LH & RH Sidelite Transom Patch Fitting w/stop & Fin Installation Instructions

Size: px
Start display at page:

Download "PFT-61 LH & RH Sidelite Transom Patch Fitting w/stop & Fin Installation Instructions"

Transcription

1 PFT-61 LH & RH Sidelite Transom Patch Fitting w/stop & Fin Installation Instructions For Installation Assistance, Call Tools Needed: Torque Wrench and Bit Screwdriver (Phillips) 5mm Hex Wrench 4 3 /16" (106) 4 3 /16" (106) 2 1 /16" (52) Fin Panel Side Panel Top Panel NOT TO SCALE Parts Included 2 1 /16" (52) Exterior View PFT-61RH } Bracket Cover Plate PFT-61LH Cover Plate } Bracket z Cover Plate { Screws (3) w Bushings (5) u Cover Plate w Bushings (5) u Cover Plate { Screws (3) y Screws (5) v Bracket PFT-61RH Parts List 1 Cover Plate 2 Bracket 3 Bushings (5) 4 Bracket /16" - M6 x 27 Screws (5) 6 Cover Plate 7 3 /4" - M4 x 20 Phillips Head Screws (3) 8 Cover Plate 9 Bracket z Cover Plate y Screws (5) v Bracket PFT-61LH Parts List 1 Cover Plate 2 Bracket 3 Bushings (5) 4 Bracket /16" - M6 x 27 Screws (5) 6 Cover Plate 7 3 /4" - M4 x 20 Phillips Head Screws (3) 8 Cover Plate 9 Bracket without the express written permission of ASSA ABLOY Inc. is prohibited. PFT-61-06/17

2 1. Prepare the Glass USE FABRICATION SKETCH TO CUT AND DRILL GLASS. Cut away glass (shaded area) along dotted line to match sketch dimensions. Drill five 13 /16" (20 mm) diameter holes. NOT TO SCALE DIMENSIONS IN INCHES (MILLIMETERS) rad. 7 / 16 " (11) 2 3 /8" (60) 1 3 /16" (30) Fin Panel 7 / 16 " (11) 1 3 / 16 " (30) 1 3 / 4 " (45) 1 / 8 " (3) Top Panel Sketch shown for RIGHT HAND. Flip horizontal for LEFT HAND preparation. 2 7 / 8 " (73) 1 / 8 " (3) Side Panel Caution: Office copiers, printers and facsimile machines may change the size of a drawing and make it inaccurate to use as a template. without the express written permission of ASSA ABLOY Inc. is prohibited. PFT-61-06/17 2

3 2. Attach Fin to Support Bracket (following diagrams show RIGHT HAND bracket) Make sure the surface is thoroughly cleaned and remove all screws. Attach Bracket 11 to Bracket x with Screws { using screwdriver ensuring that the bushing side of Bracket x is facing the glass. { Screws (3) 3. Fasten Support Brackets Make sure the surface is thoroughly cleaned and remove all screws. Insert three Bushings w into prepped 13 /16" (20 mm) diameter holes to join Brackets v & x. Place Bracket x into prepped area of glass, join Bracketv from the other side. Insert two Screws y into holes and tighten with 5mm hex wrench to hold Brackets together. Do not tighten completely to allow for adjustments throughout installation. Insert Screw y into Bracket v, align fitting to desired position. Torque three Screws y to 12 nm. w Bushings y Screws 5 mm Hex Wrench v Bracket without the express written permission of ASSA ABLOY Inc. is prohibited. PFT-61-06/17 3

4 4. Adhere Cover Plates Remove adhesive strip paper on both Brackets v & x to adhere Cover Plates u & z. Hook Cover Plates u & z over hinge side locking pins. Push in spring loaded locking pin on opposite side of Bracket. Snap on Cover Plates. z Cover Plate u Cover Plate 5. Install Fin Insert two Bushings w into prepped 13 /16" (20 mm) diameter holes to join Brackets } & 11. Place Bracket 11 into prepped area of glass, join Bracket } from the other side. Insert Screw y into hole and tighten with 5mm hex wrench to hold Brackets together. Do not tighten completely to allow for adjustments throughout installation. Insert Screw y into Bracket }, align fitting to desired position. Torque both Screws y to 12 nm. w Bushings } Bracket y Screws without the express written permission of ASSA ABLOY Inc. is prohibited. PFT-61-06/17 4

5 6. Adhere Cover Plates Remove adhesive strip paper on both Brackets } & 11 to adhere Cover Plates & 10. Hook Cover Plates & 10 over hinge side locking pin. Push in spring loaded locking pin on top and bottom of Bracket. Snap on Cover Plates. Cover Plate without the express written permission of ASSA ABLOY Inc. is prohibited. PFT-61-06/17 5

6 USA: ASSA ABLOY Glass Solutions Rockwood, PA Phone: without the express written permission of ASSA ABLOY Inc. is prohibited. PFT-61-06/17

PFT-71 Transom Connector w/fin Installation Instructions

PFT-71 Transom Connector w/fin Installation Instructions PFT-71 Transom Connector w/fin Installation Instructions For Installation Assistance, Call 855.594.6989 www.assaabloyglass.us Tools Needed: Torque Wrench and Bit Screwdriver (Phillips) 5mm Hex Wrench 4

More information

626F Exit Device Trim Installation Instructions

626F Exit Device Trim Installation Instructions 626F Exit Device Trim Installation Instructions For use with all Yale 7000, 2100, 1800 and 1500 Series Exit Devices (Wood and Metal Doors) Attention Installer Any retrofit or other field modification to

More information

REF QTY PART DESCRIPTION PART NUMBER 1 1 Side Mirror, Driver (Not Shown) 1 Loctite - 263, 0.5 ml, Red Instructions

REF QTY PART DESCRIPTION PART NUMBER 1 1 Side Mirror, Driver (Not Shown) 1 Loctite - 263, 0.5 ml, Red Instructions MIRROR KIT P/N 2881001, 2881002, 2881011, 2881012 APPLICATION em1400, em1400 LSV or M1400 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

SWING DOOR SOFT ENCLOSURE (part# 16733)

SWING DOOR SOFT ENCLOSURE (part# 16733) 800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench

More information

TS93 PT/PTH. Surface applied door closer. Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH)

TS93 PT/PTH. Surface applied door closer. Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH) Surface applied door closer Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH) TABLE OF CONTENTS Technical specifications Size selection chart 2 Closer setup

More information

TS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall)

TS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall) TS96 PKT 90/9 Surface applied door closer Installation instructions: Pocket door track mount in 90 /9 pocket (Closer on wall) TABLE OF CONTENTS Closer overall Technical specifications Door templates Closer

More information

4600 Heavy Duty Designer Deadlatch Handles With 4300, 4500, and 4900 Series Deadlatches

4600 Heavy Duty Designer Deadlatch Handles With 4300, 4500, and 4900 Series Deadlatches Phoenix, AZ Tel: 1-800-872-3267 Mon-Fri: 6:00am - 4:00pm PDT Fax: 1-800-232-7329 www.adamsrite.com 4600 Heavy Duty Designer Deadlatch Handles With 4300, 4500, and 4900 Series Deadlatches Installation Instructions

More information

7100SZ Series SafeZone Installation and Instruction Manual

7100SZ Series SafeZone Installation and Instruction Manual 7100SZ Series SafeZone Installation and Instruction Manual Patent Pending 80-9371-0081-00 (10-10) Pull Side Applications with Slide Track (7110SZ, 7150SZ) (see page 5 for template) 3 1 Push Side Applications

More information

RZR WINCH KIT KIT P/N

RZR WINCH KIT KIT P/N RZR WINCH KIT KIT P/N 2878787; 2879334 Application All RZR Models except RZR XP Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

5600 Series Power Operator Installation and Instruction Manual

5600 Series Power Operator Installation and Instruction Manual 5600 Series Power Operator Installation and Instruction Manual 80-956-000-00 (08-) 5 ASSA ABLOY 6 Item No. Description Motor (5600M) Cover (5600COV) Control Inverter (5600IN) Power Supply VDC (5600PS)

More information

TIP-OUT GLASS WINDSHIELD KIT

TIP-OUT GLASS WINDSHIELD KIT TIP-OUT GLASS WINDSHIELD KIT P/N 2881108 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

Installation Instructions Series 78-B/FHA Hold Open

Installation Instructions Series 78-B/FHA Hold Open Installation Instructions Series 78-B/FHA Hold Open Traditional Style Door Closers Read these instructions before proceeding with the installation. Make sure that the door opens the full angle desired

More information

M-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET

M-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET Please contact the Techline for the most current instruction information (800) FORD788.!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: The use of a floor hoist is

More information

Door Closer Arms DC F95 (Non-Hold Open) Regular Arm Used with regular arm mounting (pull side) and top jamb mounting (push side)

Door Closer Arms DC F95 (Non-Hold Open) Regular Arm Used with regular arm mounting (pull side) and top jamb mounting (push side) Door Closer Arms Used with regular arm mounting (pull side) and top jamb mounting (push side) Non-Hold Open arm standard on the DC3200 (Hold-Open) 597F52 Heavy-Duty Mounted on pull side Optional on DC3200

More information

KAWNEER 1686 EL CONCEALED EXIT DEVICE

KAWNEER 1686 EL CONCEALED EXIT DEVICE FEBRUARY, 2012 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl

More information

M-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET

M-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET Please visit www.fordracingparts.com for the most current instruction information.!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE

More information

DODGE RAM WITHOUT FENDER FLARES FRONT MUD GUARD INSTALLATION INSTRUCTIONS

DODGE RAM WITHOUT FENDER FLARES FRONT MUD GUARD INSTALLATION INSTRUCTIONS DODGE RAM WITHOUT FENDER FLARES FRONT MUD GUARD INSTALLATION INSTRUCTIONS PART NO: 5817 Please read instructions thoroughly before installation. Tools Required Short Phillips screwdriver Center punch Drill

More information

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY 00 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) Track Assembly (0-) / Replacement

More information

Installation & Programming Guide

Installation & Programming Guide Installation & Programming Guide EMTouch & EMTouch Classic Style Electronic Lever Locksets EMTouch EMTouch Classic Style ASSA ABLOY, the global leader in door opening solutions What s in the Box 4a 4b

More information

1PC TONNEAU COVER INSTALLATION INSTRUCTIONS IMPORTANT

1PC TONNEAU COVER INSTALLATION INSTRUCTIONS IMPORTANT For use in cleaning painted metal, glass and other vehicle surfaces. For external use only. Dispose of properly after use. IMPREGNATED WITH 70% ISOPROPLY ALCOHOL TC0d PC TONNEAU COVER INSTALLATION INSTRUCTIONS

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Door Openings 85 to 0 or to 80 Adjustable Arm and Slide Track Application Maximum Hinge Side Frame Reveal to /8 (mm) Hinge (Pull) Side of Door Installation 5700 LEO

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Openings 85 to 0 or to 70 Double Lever Arm Application for Frame Reveals (76) to 7 (78mm)* Stop (Push) Side of Installation 5700 LEO Operator Installation Instructions

More information

SYSTIMAX 360 FTP Evolve Panel Instructions

SYSTIMAX 360 FTP Evolve Panel Instructions Instruction Sheet 860509975 SYSTIMAX Solutions SYSTIMAX 360 FTP Evolve Instructions General The SYSTIMAX 360 Evolve modular foiled twisted pair (FTP) patch panel is a highly flexible 24- or 48-port, front

More information

REAR ROOF SPEAKER KIT

REAR ROOF SPEAKER KIT REAR ROOF SPEAKER KIT P/N 2882876 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY

5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY 5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY 80-957-000-00 (06-5) Patents 5,88,97; 7,6,096; 7,8, 6 5 0 8 7 9 Item No. Description Back plate Door Closer

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: KIT-CARBON FIBER REAR SPOILER INFINITI Q50 T99J1 J5000 KIT CONTENTS: Item A B C D Qty. 1 4 1 1 Part Description Spoiler Assembly

More information

Assembly and Modular Table Power System Installation Instructions for Train Tables

Assembly and Modular Table Power System Installation Instructions for Train Tables Assembly and Modular Table Power System Installation Instructions for Train Tables Table of Contents Topic Attach Stretcher to Legs Attach Base To Table Top Attach Modesty Panel to Assembly Page 2 3 4

More information

KAWNEER 1686 CONCEALED EXIT DEVICE

KAWNEER 1686 CONCEALED EXIT DEVICE FEBRUARY, 2015 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl

More information

ASSA ABLOY Universal Door Closers

ASSA ABLOY Universal Door Closers Installation Instructions For Non-Hold Open or A Hold Open Arm Options DC6200 Series DC6400 Series Multi-Sized thru 6 Half-Size thru 6 Regular Arm Parallel Arm Universal Door Closers Jamb Mount See pages

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

CANVAS DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

CANVAS DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. CANVAS DOOR KIT P/N 2882902, 2882903 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY 0 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) / Replacement Motor Key (00KEY) Rod

More information

H15P. Toyota Hilux A-DECK Dual Cab

H15P. Toyota Hilux A-DECK Dual Cab Toyota Hilux A-DECK Dual Cab Page 1 of 14 Fitting Instructions Part Number H15 Toyota Hilux A-DECK Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PART # Product: Vehicle: 074ST17A89B FRONT BUMPER T17 Toyota TACOMA 2016 / ON (Third Gen) WARNING Read instructions completely before commencing fitment. Always use personal safety

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS MASSEY FERGUSON THX FOR MASSEY FERGUSON 528, 53, AGCO ST28A, ST33A, CHALLENGER MT255B SOFT SIDED CAB ENCLOSURE (p/n MFTHXSS) This Curtis Cab

More information

TS93 EMF T/PT/TDE. Surface applied door closer

TS93 EMF T/PT/TDE. Surface applied door closer TS9 EMF T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer (no smoke detector) (EMF T) Push side track mount closer (no smoke detector) (EMF PT) Double egress

More information

Installation Instructions - D-Series Warming Cabinet Instruction Door for Hinge UseReversal (Glass and Stainless Steel Doors)

Installation Instructions - D-Series Warming Cabinet Instruction Door for Hinge UseReversal (Glass and Stainless Steel Doors) Header Cam Lock Reversal... pg 1-4 Glass Door hinge reversal..... pg 5-9 Steel Door hinge reversal..... pg 10-13 Remove Panels Before reversing door hinges, the Header Cam Lock assembly must be reversed.

More information

Series 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications

Series 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications Series 940 J940 ASSA JL940 ABLOY Installation Instructions Multi-Sized to 6 Non-Hold Open Regular Arm Applications Left Hand Regular Arm Application Contents Page Template Template with 984-8 Drop Plate

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL INSTALLATION INSTRUCTIONS KAWASAKI MULE 4000 CAB KIT (p/n: KAF40-005WA and KAF40-005BA) NOTE: Hard sided doors are sold separately. This manual is the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 4000 SERIES (4500/4600/4700) (4510/4610/4710) (4120/4320/4520/4720) HARD SIDED CAB ENCLOSURE (p/n 1JD4120AS) SOFT SIDED CAB ENCLOSURE

More information

OUTSIDE OF VEHICLE INSIDE OF VEHICLE

OUTSIDE OF VEHICLE INSIDE OF VEHICLE LAND ROVER DEFENDER 90 / 110 / TDi/ TD5/ PUMA Aluminium GULLWING DOOR MKII GWLD009 INSTALL TIME: 3 Hours OUTSIDE OF VEHICLE INSIDE OF VEHICLE IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS

More information

Roller Shades CORD LOOP. Head Rail, Fascia and No Head Rail. Installation & Care Instructions

Roller Shades CORD LOOP. Head Rail, Fascia and No Head Rail. Installation & Care Instructions Roller Shades CORD LOOP Head Rail, Fascia and No Head Rail Installation & Care Instructions 152038 H 5/30/2017 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill, drill bits

More information

Vehicle and all installation material temperatures must be within the following range before and during installation: 60 F [15 C] and 100 F [43 C].

Vehicle and all installation material temperatures must be within the following range before and during installation: 60 F [15 C] and 100 F [43 C]. INSTALLATION INSTRUCTIONS DESCRIPTION: BODY SIDE MOLDING KIT, DEALER Vehicle and all installation material temperatures must be within the following range before and during installation: 60 F [15 C] and

More information

Fitting Instructions

Fitting Instructions Reverse Park Assist Suitable for: Nissan Navara Kit Part No: 5466XX NP00 Tow-Pro Wiring Kit Fitting Instructions Accessory Kit Estimated Fitting Time: 0 Minutes FI98 Page 0 of 5 General Notes Read through

More information

ASSA ABLOY Universal Door Closers with Heavy Duty Spring Stop Parallel Arms

ASSA ABLOY Universal Door Closers with Heavy Duty Spring Stop Parallel Arms DC610 Series Multi-Sized 1 thru 6 DC610 Series Half-Size 1 thru 6 Installation Instructions Universal Closers with Heavy Duty Spring Stop Parallel Arms A11 - Non- Arm A1 - Arm STANDARD APPLICATION WITH

More information

(2012 Production Onwards) INTEGRATED SIDE STEP INSTALLATION INSTRUCTION. 60 Minutes

(2012 Production Onwards) INTEGRATED SIDE STEP INSTALLATION INSTRUCTION. 60 Minutes NISSAN DUALIS (2012 Production Onwards) INTEGRATED SIDE STEP INSTALLATION INSTRUCTION Accessory Part No. STEP0004 60 Minutes Approx Product Weight: 15kg/33 lb IMPORTANT - PLEASE READ INSTRUCTIONS BEFORE

More information

M670/M680BD MAGNALOCK SERIES Installation Instructions

M670/M680BD MAGNALOCK SERIES Installation Instructions Securitron www.securitron.com Tel 800.624.5625 techsupport@securitron.com M670/M680BD MAGNALOCK SERIES Installation Instructions Page 1 Rev. D, 12/14 Table of Contents Package Contents... 3 Mounting Hardware...

More information

INSTALLATION AND OWNER S MANUAL Wing Deflectors, Fairing Mount N5107 and N5109 for HONDA GL1800

INSTALLATION AND OWNER S MANUAL Wing Deflectors, Fairing Mount N5107 and N5109 for HONDA GL1800 INSTALLATION AND OWNER S MANUAL Wing Deflectors, Fairing Mount N5107 and N5109 for HONDA GL1800 Thank you for purchasing a National Cycle product. Please read these instructions carefully and thoroughly

More information

Fabric Studio Custom Roll Shades Installation Instructions

Fabric Studio Custom Roll Shades Installation Instructions Fabric Studio Custom Roll Shades Installation Instructions Cassette System Battery Motor Lifting System Inside or Outside Mount Thank you for purchasing your new roll shade. It has been custom-made from

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS FOR MASSEY FERGUSON 233, 428v (gear), 428v (hydro) SOFT SIDED CAB ENCLOSURE (p/n: MF233SS) This Curtis Cab is designed and manufactured for use

More information

ASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device

ASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device Overhead Concealed Closer Holder Releasing Device with Rigid Slide Arm For wood or metal doors 1-3/4 to 2-1/4" (45-57mm) thick Hung in a hollow metal frame Standard butt hinges Typical Installation One

More information

Installation Instructions

Installation Instructions Installation Instructions TrailView Soft Top Important Safety Information For proper installation and best possible fit, please read all instructions BEFORE you begin. Periodically check all components

More information

REARVIEW MIRROR AND BACKUP CAMERA KIT

REARVIEW MIRROR AND BACKUP CAMERA KIT REARVIEW MIRROR AND BACKUP CAMERA KIT P/N 2881483 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for.

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-049 Cab Enclosure MULE SX 3-4 Hours WARNING Improper installation of this accessory could result in an accident causing serious

More information

Holden Captiva II. (2011 Production Onwards) ALLOY NUDGE BAR INSTALLATION INSTRUCTION

Holden Captiva II. (2011 Production Onwards) ALLOY NUDGE BAR INSTALLATION INSTRUCTION Holden Captiva II (20 Production Onwards) ALLOY NUDGE BAR INSTALLATION INSTRUCTION Accessory Part No. NBAR0035 Installation Time: 30min Approx Nudge Bar Weight: 4kg! Important: Please read each step of

More information

STEREO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev 01 03/16 Page 1 of 11. E2, E4, E6, and el XD

STEREO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev 01 03/16 Page 1 of 11. E2, E4, E6, and el XD STEREO KIT P/N 2881864 APPLICATION E2, E4, E6, and el XD BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions

More information

AUDIO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

AUDIO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. AUDIO KIT P/N 2882696 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation

More information

INSTALLATION INSTRUCTIONS CRL JACKSON P PANIC EXIT DEVICE

INSTALLATION INSTRUCTIONS CRL JACKSON P PANIC EXIT DEVICE INSTALLATION INSTRUCTIONS CRL JACKSON 1095-1095P PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0246 ORDER OF AND INSTALLATION Tools

More information

Installation Guide Folding L-Bracket with Display Mounting Extension and Keyboard Tray for M-Series or VHM Arm

Installation Guide Folding L-Bracket with Display Mounting Extension and Keyboard Tray for M-Series or VHM Arm 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Folding L-Bracket with Display Mounting Extension and Keyboard Tray for M-Series or VHM Arm

More information

Ground Effects, P/N: (V6), (V8)

Ground Effects, P/N: (V6), (V8) , P/N: 92248596 (V6), 92248560 (V8) 3. Open trunk and remove 3 scrivets per side. Retain. Remove LH and RH tail lamp access cover. Retain. Refer to Figure 1. NOTE: Installation is made easier with the

More information

Installation Instructions I - Sheet Number I-TVR-01 Rev. A

Installation Instructions I - Sheet Number I-TVR-01 Rev. A Installation Instructions I - Sheet Number I-TVR-01 Rev. A TrailView Soft Top For proper installation and best possible fit, please read all instructions BEFORE you begin. For technical assistance or to

More information

INSTRUCTIONS, ME2 BACKUP BAR KIT

INSTRUCTIONS, ME2 BACKUP BAR KIT LIFT CORPORATION Sht. 1 of 8 DSG# M-16-27 Rev. - Date: 12/20/16 INSTRUCTIONS, ME2 BACKUP BAR KIT FORD F-150 KIT P/N 296845-01 FORD F-150 KIT (GALVANIZED) P/N 296845-01G BACKUP BAR, 55-1/2 LG. P/N 296844-01,

More information

PLEASE READ THESE INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION

PLEASE READ THESE INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION PART NUMBER: L0SSJ000 INSTALLATION INSTRUCTIONS DESCRIPTION: FORESTER TRAILER HITCH PLEASE READ THESE INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION SAFETY PRECAUTION: When installing Trailer Hitch,

More information

PLEASE READ THIS INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION

PLEASE READ THIS INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION INSTALLATION INSTRUCTIONS PART NUMBER: L0SXC000 DESCRIPTION: 09 ASCENT TRAILER HITCH PLEASE READ THIS INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION SAFETY PRECAUTION: When installing Trailer Hitch,

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 3000 SERIES (4200/4300/4400) (4210/4310/4410) & (3120/3320/3520/3720) HARD SIDED CAB ENCLOSURE (p/n 1JD3520AS) SOFT SIDED CAB ENCLOSURE

More information

FRONT STABILIZER BAR KIT

FRONT STABILIZER BAR KIT FRONT STABILIZER BAR KIT P/N 2881205 APPLICATION RZR XP 1000 MY16 and Newer, RZR XP 4 1000 MY16 and Newer BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted

More information

Side Rocker Installation Instructions

Side Rocker Installation Instructions Side Rocker Installation Instructions Guidelines + Trial fit all parts prior to painting + Do not use the side rockers as an attachment point for tie downs + Every 3-6 months, make sure all fasteners are

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE GATOR HPX and/or XUV HARD SIDED CAB ENCLOSURE (p/n: 1GTR44AS) SOFT SIDED CAB ENCLOSURE (p/n: 1GTR44SS) 111 HIGGINS STREET, WORCESTER,

More information

Made in the U.S.A.! SAFETY

Made in the U.S.A.! SAFETY Made in the U.S.A.! SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. A, p. of 0 INSTALLATION & OWNER S MANUAL MASSEY FERGUSON GC2400 cab kit p/n MFGC2400 Installation Instructions The contents of this envelope are the property of the owner. Be sure to leave with the

More information

WARNING NOTICE CAUTION ASSEMBLY INSTRUCTIONS

WARNING NOTICE CAUTION ASSEMBLY INSTRUCTIONS MODEL 284 EZ-GLIDE SYSTEM 10' HIGH CUBE VAN DRIVER SIDE ALUMINUM DROP DOWN LADDER RACK ATTENTION Read and understand all instructions and warnings before operating or using this product. WARNING This product

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C p. 1 of 21 INSTALLATION & OWNER S MANUAL F5205 HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave with the owner when

More information

VOLKSWAGEN AMAROK 3 PIECE HARD TONNEAU COVER INSTALLATION INSTRUCTIONS

VOLKSWAGEN AMAROK 3 PIECE HARD TONNEAU COVER INSTALLATION INSTRUCTIONS VOLKSWAGEN AMAROK 3 PIECE HARD TONNEAU COVER INSTALLATION INSTRUCTIONS Care Instructions: Clean Tonneau Cover with a mild detergent and water solution. Do not use abrasive cleaners or solvents. Place these

More information

Hinge (Pull) Side Door Application DC6230 Series Multi-Sized 1 thru 6 DC6430 Series Half-Size 1 thru 6. Door Mounted DC6230 & DC6430

Hinge (Pull) Side Door Application DC6230 Series Multi-Sized 1 thru 6 DC6430 Series Half-Size 1 thru 6. Door Mounted DC6230 & DC6430 Installation Instructions Universal Door Closers Slide Track Application (0 Maximum Door Swing) (standard)- N.H.O. Bumper Stop A - H.O. Bumper Stop Track - Pull Side See pages 2 & Hinge (Pull) Side Door

More information

~ Manufactured. '-ccz CR, ", MOUNTING INSTRUCTIONS. With Replacement Parts Listing For A OPTIONS

~ Manufactured. '-ccz CR, , MOUNTING INSTRUCTIONS. With Replacement Parts Listing For A OPTIONS '-ccz CR, ", '..." 5 ' '.", ;,...,...'.,!e./i,.,.',.' ',', MOUNTING INSTRUCTIONS With Replacement Parts Listing For TORO 355-D/455-D A-47 ROPS CAB I- OPTIONS 4-3069 Heater Kit Option 4-307 Flashing Light

More information

Installation Instructions Supertop NX Twill

Installation Instructions Supertop NX Twill Installation Instructions Supertop NX Twill Vehicle Application: Jeep Wrangler Unlimited 2007-current Part Number 54823 Installation Tips Before you begin installing your new Supertop NX Twill, please

More information

2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E

2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E BILLET GRILLS IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete 5122-1900-11E TOOLS REQUIRED Automotive

More information

POLY TIP-DOWN WINDSHIELD KIT

POLY TIP-DOWN WINDSHIELD KIT POLY TIP-DOWN WINDSHIELD KIT P/N 2883261 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

ALLDATA Online Toyota Truck Tacoma 4WD V6-4.0L (1GR-FE) - Service and... Service and Repair 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

ALLDATA Online Toyota Truck Tacoma 4WD V6-4.0L (1GR-FE) - Service and... Service and Repair 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Page 1 of 9 Service and Repair FRONT WIPER MOTOR REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. REMOVE FRONT WIPER ARM HEAD CAP a. Using a screwdriver wrapped with protective tape, remove

More information

99-03 V6 "Shaker" System Instructions. *03 Model requires new hood Contents w/ Kit. Tool List For Appliqué:

99-03 V6 Shaker System Instructions. *03 Model requires new hood Contents w/ Kit. Tool List For Appliqué: 99-03 V6 "Shaker" System Instructions *03 Model requires new hood Contents w/ Kit 1 - Hood Appliqué 1 - Aluminum Shaker Scoop 1 - Lower Air Box w/drain tube fittings (2) 1 - Upper Air Box w/cdc nameplate

More information

INSTALLATION INSTRUCTIONS Accessory Application Publications No. 2009 CIVIC HYBRID All 40191 Issue Date AUG 2008 PARTS LIST Rear under spoiler 2 Step bolts 4 Self-tapping screws TOOLS REQUIRED Phillips

More information

Ref Qty Part Description Part Number -1- Kit ( ) Contents:

Ref Qty Part Description Part Number -1- Kit ( ) Contents: REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publication No. SADDLEBAG SUPPORT BRACKETS P/N 08L73-MGS-A30 2012 Only NC700X/XD Honda Dealer: Please give a copy of these instructions to your customer.

More information

ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 INSTALLATION INSTRUCTIONS AND OWNERS MANUAL SIDE AND TOP MOUNT ENGINE CONTROLS MODEL SL-3

ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 INSTALLATION INSTRUCTIONS AND OWNERS MANUAL SIDE AND TOP MOUNT ENGINE CONTROLS MODEL SL-3 MEMBER INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Part # 212442, Rev 0, 08/2013 www.seastarsolutions.com ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 MANUFACTURED BY MARINE ACQUISITION INCORPORATED

More information

Engine, disassembly and

Engine, disassembly and Page 1 of 13 13-1 Engine, disassembly and assembly Ribbed belt, removing and installing Removing - Remove noise insulation -arrows-. - Remove bumper Repair Manual, Body Exterior, Repair Group 63 - Move

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Standard Clutch CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... Installation: Mounting Types and Window Terminology... Mount the Installation Brackets

More information

V2M1200/1290 Series Maglock Installation Instructions

V2M1200/1290 Series Maglock Installation Instructions Securitron Phoenix, AZ 85044 Tel: 1-800-624-5625 Mon-Fri: 6:00am - 4:00pm PDT Fax: 1-800-232-7329 www.securitron.com V2M1200/1290 Series Maglock Installation Instructions 1 Table of Contents Product Information...

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. G, p. 1 of 19 INSTALLATION & OWNER S MANUAL YANMAR Sc SERIES cab kit with hard doors and soft rear curtain Curtis p/n: 1CYSC1AS Yanmar p/n: 59A40056727 Optional Hard Rear Panel Curtis p/n: SC100-06A

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 15 INSTALLATION & OWNER S MANUAL YANMAR Sc2450 cab kit with hard doors and soft rear curtain Curtis p/n: 1CYSC2450AS The contents of this envelope are the property of the owner. Be sure to leave

More information

P/N Rev 01 04/14-1- NOTE: If you are ordering hinges for your rear doors, order and/or

P/N Rev 01 04/14-1- NOTE: If you are ordering hinges for your rear doors, order and/or REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2505 Lowering Spindle Assembly Installation Instructions ½ TON SILVERADO

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL INSTALLATION INSTRUCTIONS KAWASAKI MULE 4000 TRANS 4 FRONT CAB KIT (p/n: KAF40T-001WA and p/n: KAF40T-001BA) NOTE: Hard sided doors, soft sided doors, and rear cab are sold

More information

MAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

MAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS MAZDA BT-50 (October 0 Production Onwards) & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS Installation Time: Approx. 0 Minutes Care Instructions: Clean Tonneau Cover with a mild detergent

More information

Cervini's Functional Ram Air Kit (05-09) - Installation Instructions

Cervini's Functional Ram Air Kit (05-09) - Installation Instructions Cervini's Functional Ram Air Kit (05-09) - Installation Instructions The below installation instructions work for the following products: Cervini's Functional Ram Air Kit for 05-09 Ram Air Hood Cervini's

More information

Installation Instructions For Profile Series v.g1.5 Cylindrical Lock

Installation Instructions For Profile Series v.g1.5 Cylindrical Lock Installation Instructions For Profile Series v.g1.5 Cylindrical Lock A7854B Copyright 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in

More information

POLY TIP-DOWN WINDSHIELD KIT

POLY TIP-DOWN WINDSHIELD KIT POLY TIP-DOWN WINDSHIELD KIT P/N 2881919 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

REV READ BEFORE INSTALLATION OF KIT:

REV READ BEFORE INSTALLATION OF KIT: REV. 05-08 QTY 3D PN. FCS PART NUMBER DESCRIPTION 1 691509 A7EDG-7820049-AAPLN EDGE BODY KIT- V6 B PCS & EXH TIPS 1 691256 A 7 E D G - 7 8 20049-BAPLN EDGE BODY KIT- V6 8PCS & EXH TIPS W/HITCH 1 691501

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory HARD ROOF (3P) P/N 0SR85-HL4-1 Application SXS00M3/M3P Honda Dealer: Please give a copy of these instructions to your customer. Publication No. MII 16083 Issue Date

More information

FREEDOM4. Portable Restroom Assembly Instructions

FREEDOM4. Portable Restroom Assembly Instructions FREEDOM4 Portable Restroom Assembly Instructions 2530 Xenium Lane North, Minneapolis, MN 55441 Telephone: 763-553-1900 Fax: 763-553-1905 800-328-3332 / www.satelliteindustries.com 9/18 REVD 22541 INSTRUCTION,

More information

Connected To Control Box Series. Closer. Set Screw. Arm Screw. Right Hand Shown. 1/8" I.D. Air Inlet Tubing Connected To Control Box

Connected To Control Box Series. Closer. Set Screw. Arm Screw. Right Hand Shown. 1/8 I.D. Air Inlet Tubing Connected To Control Box *19963* 19963 Auto-Equalizer Low Energy Door Operator 1/8" I.D. Air Inlet Tubing Connected To Control Box Closer 2610 Series Set Screw Arm Screw Track Roller Track Installation Instructions Top Of Door

More information