ECE-A1HKA010 ECE-A1HKA010B ECE-A1HKA010I ECE-A1HKS010 ECE-A1HKS010B ECE-A1HKS010I ECE-A1HKSR47 ECE-A1HKSR47B ECE-A1HKSR47I EEA-GA1H1R0 EEA-GA1H1R0B

Transcription

1

2 ECE-A1HKA0 ECE-A1HKA0B ECE-A1HKA0I ECE-A1HKS0 ECE-A1HKS0B ECE-A1HKS0I ECE-A1HKSR47 ECE-A1HKSR47B ECE-A1HKSR47I EEA-GA1H1R0 EEA-GA1H1R0B EEA-GA1H1R0H EEA-GA1HR68 EEA-GA1HR68B EEA-GA1HR68H EEE-1HARAR EEE-1HARAR EEE-1HARNR EEE-1HARSR EEE-1HARAR EEE-1HARNR EEE-1HARSR

3 0D±0.5 H B±0.2 (I) (P) K (I) Aluminum Electrolytic Capacitors/ S Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualified RoHS directive compliant Specifications Category Temp. Range 40 C to +85 C Rated Range Nominal Range Capacitance Tolerance DC Leakage Current Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat 4 V.DC to 0 V.DC 1 μf to 1500 μf ±20 % (120 Hz/+20 C) I < 0.01 CV or 3 (μa) (Bi-Polar I < 0.02 CV or 6 (μa) After 2 minutes (Whichever is greater) Please see the attached standard products list (V) Z( 25 C)/Z(+20 C) Z( 40 C)/Z(+20 C) (Impedance ratio at 120 Hz) After applying rated working voltage for 2000 hours (Bi-polar:00 hours for each polarity) at +85 C ±2 C and then being stabilized at +20 C, Capacitors shall meet the following limits. ±20 % of inisial measured value Capacitance change DC leakege current Size code Rated change B(04) to D, D8(06.3) 4 W.V 00 hours ±30 % 6.3 W.V < D(06.3) Miniature > W.V 00 hours ±20 % < 200 % initial specified value < initial specified value After storage for 00 hours at +85 C±2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 C, capacitors shall meet the following limits. Capacitance change DC leakage current Frequency correction factor for ripple current ± % of initial measured value < initial specified value < initial specified value Frequency (Hz) 50, k k to Correction factor Marking Dimensions in mm (not to scale) (Unit : mm) Example:4V μf (Polarized) Marking color: BLACK 0.3 max. A±0.2 Negative polarity marking ( ) (No marking for the bi-polar) 44 Lot number Capacitance (μf) Series indentification (S) or (A) Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (V.DC) (6=6.3 V.DC) Pressure Relief (0 and larger) L + Size code D L A, B H I W P K B max ± C max ± D max ± D ± max ± E ± max ± F 8.0.2± max ± ±0.20 G.0.2± max ± ±0.20 W ( ) Reference size This product qualify for AEC-Q200, but it has some deviations. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-9

4 Aluminum Electrolytic Capacitors/ S Standard Products (V) Case size Specification Min. Packaging Q'ty Ripple Size Current Reflow Dia. Length Endurance (RoHS:compliant) Code (120 Hz) (120 Hz) (+85 C) (+20 C) (μf) (ma r.m.s.) (hours) B EEE0GA0SR (1) B EEE0GA470SR (1) C EEE0GA1SR (1) D EEE0GA1SP (1) (D) EEE0GA1WP (1) D EEE0GA471XP (1) B EEE0JA0SR (1) (B) EEE0JA0WR (1) (B) EEE0JA470WR (1) C EEE0JA470SR (1) (C) EEE0JA1WR (1) D EEE0JA1SP (1) (D) EEE0JA1WP (1) D EEE0JA1XP (1) E EEE0JA1P (2) F EEE0JA471P (2) (F) EEE0JA2UP (2) G EEE0JA2P (2) G EEE0JA152P (2) (B) EEE1AA0WR (1) (B) EEE1AA0WR (1) C EEE1AA0SR (1) (C) EEE1AA470WR (1) (C) EEE1AA1WR (1) D EEE1AA1SP (1) D EEE1AA1XP (1) E EEE1AA1P (2) F EEE1AA1P (2) (F) EEE1AA471UP (2) G EEE1AA471P (2) G EEE1AA2P (2) B EEE1CA0SR (1) (B) EEE1CA0WR (1) C EEE1CA0SR (1) (C) EEE1CA0WR (1) (C) EEE1CA470WR (1) D EEE1CA470SP (1) (D) EEE1CA1WP (1) E EEE1CA1P (2) D EEE1CA1XP (1) F EEE1CA1P (2) (F) EEE1CA1UP (2) G EEE1CA1P (2) (F) EEE1CA471UP (2) G EEE1CA471P (2) 500 Size code( ):Miniaturization product Please refer to the page of Reflow Profile and The Dimensions. When requesting vibration-proof product, please put the last V instead to P Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-

5 Aluminum Electrolytic Capacitors/ S Standard Products (V) Case size Specification Min. Packaging Q'ty Ripple Size Current Reflow Dia. Length Endurance (RoHS:compliant) Code (120 Hz) (120 Hz) (+85 C) (+20 C) (μf) (ma r.m.s.) (hours) B EEE1EA4R7SR (1) (B) EEE1EA0WR (1) C EEE1EA0SR (1) (C) EEE1EA0WR (1) D EEE1EA0SP (1) (C) EEE1EA0WR (1) D EEE1EA0SP (1) (D) EEE1EA470WP (1) D EEE1EA1XP (1) (E) EEE1EA1UP (2) F EEE1EA1P (2) (F) EEE1EA1UP (2) G EEE1EA1P (2) (F) EEE1EA1UP (2) G EEE1EA1P (2) G EEE1EA471P (2) B EEE1VA4R7SR (1) (B) EEE1VA0WR (1) C EEE1VA0SR (1) (C) EEE1VA0WR (1) D EEE1VA0SP (1) (D) EEE1VA0WP (1) E EEE1VA0P (2) (D) EEE1VA470WP (1) E EEE1VA470P (2) D EEE1VA1XP (1) (F) EEE1VA1UP (2) G EEE1VA1P (2) (F) EEE1VA1UP (2) G EEE1VA1P (2) G EEE1VA1P (2) 500 Size code( ):Miniaturization product Please refer to the page of Reflow Profile and The Dimensions. When requesting vibration-proof product, please put the last V instead to P Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-11

6 Aluminum Electrolytic Capacitors/ S Standard Products (V) Case size Specification Min. Packaging Q'ty Ripple Size Current Reflow Dia. Length Endurance (RoHS:compliant) Code (120 Hz) (120 Hz) (+85 C) (+20 C) (μf) (ma r.m.s.) (hours) B EEE1HA0R1SR (1) B EEE1HARSR (1) B EEE1HARSR (1) B EEE1HAR47SR (1) B EEE1HA0SR (1) B EEE1HA2R2SR (1) B EEE1HA3R3SR (1) (B) EEE1HA4R7WR (1) C EEE1HA4R7SR (1) (C) EEE1HA0WR (1) D EEE1HA0SP (1) (D) EEE1HA0WP (1) E EEE1HA0P (2) D EEE1HA0XP (1) (E) EEE1HA0UP (2) F EEE1HA0P (2) D EEE1HA470XP (1) (F) EEE1HA470UP (2) G EEE1HA470P (2) (F) EEE1HA1UP (2) G EEE1HA1P (2) G EEE1HA1P (2) (E) EEE1JA0UP (2) F EEE1JA0P (2) F EEE1JA0P (2) (F) EEE1JA470UP (2) G EEE1JA470P (2) G EEE1JA1P (2) E EEE2AA3R3P (2) (E) EEE2AA4R7UP (2) (E) EEE2AA0UP (2) F EEE2AA0P (2) (F) EEE2AA0UP (2) G EEE2AA0P (2) G EEE2AA0P (2) 500 Size code( ):Miniaturization product Please kindly accept last shipment : 31/Mar/2015 Please refer to the page of Reflow Profile and The Dimensions. When requesting vibration-proof product, please put the last V instead to P Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-12

7 Aluminum Electrolytic Capacitors/ S Standard Products (Bi-polar) (V) Endurance : 85 C 2000 h Case size Specification Min. Packaging Q'ty Ripple Size Current Reflow Dia. Length Endurance (RoHS:compliant) Code (120 Hz) (120 Hz) (+85 C) (+20 C) (μf) (ma r.m.s.) (hours) C EEE0JA0NR (1) D EEE0JA470NP (1) B EEE1AA0NR (1) D EEE1AA0NP (1) B EEE1CA4R7NR (1) C EEE1CA0NR (1) D EEE1CA0NP (1) B EEE1EA3R3NR (1) C EEE1EA4R7NR (1) D EEE1EA0NP (1) B EEE1VA2R2NR (1) C EEE1VA4R7NR (1) D EEE1VA0NP (1) B EEE1HARNR (1) B EEE1HARNR (1) B EEE1HAR47NR (1) B EEE1HA0NR (1) C EEE1HA2R2NR (1) C EEENZ1H3R3R (1) D EEE1HA4R7NP (1) 00 Please kindly accept last shipment : 31/Mar/2015 Please refer to the page of Reflow Profile and The Dimensions. When requesting vibration-proof product, please put the last V instead to P Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-13

8 0D±0.5 H B±0.2 (I) (P) K (I) Aluminum Electrolytic Capacitors/ S Surface Mount Type Series: S Type: V S High temperature Lead-Free reflow (suffix:a ) Features Endurance: 85 C 2000 h Vibration-proof product is available upon request.(08 mm and larger) AEC-Q200 qualified RoHS directive compliant Specifications Category Temp. Range 40 C to +85 C Rated Range Nominal Range Capacitance Tolerance DC Leakage Current Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat 6.3 V.DC to 50 V.DC 1 μf to 1500 μf ±20 % (120 Hz/+20 C) I < 0.01 CV or 3 (μa) After 2 minutes (Whichever is greater) Please see the attached High temperature lead-free reflow products list. (V) Z( 25 C)/Z(+20 C) Z( 40 C)/Z(+20 C) (Impedance ratio at 120 Hz) After applying rated working voltage for 2000 hours (Miniaturization product type 00 hours) at +85 C±2 C and then being stabilized at +20 C, Capacitors shall meer the following limits. ±20 % of initial measured value Size code change Capacitance change D8( ) 2000 hours ±25 % <D(06.3) Miniature 00 hours ±30 % < 200 % of initial specified value DC leakege current < initial specified value After storage for 00 hours at +85 C±2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 C, capacitors shall meet the following limits. Capacitance change DC leakage current Frequency correction factor for ripple current ± % of initial measured value < initial specified value < initial specified value Frequency (Hz) 50, k k to Correction factor Marking Dimensions in mm (not to scale) (Unit : mm) Example:6.3 V μf (Polarized) Marking color: BLACK 0.3 max. A±0.2 Negative polarity marking ( ) 64 Lot number Capacitance (μf) Series indentification (S) or (A) Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (V.DC) (6=6.3 V.DC) Size code Pressure Relief (0 and larger) L + D L A, B H. I W P K B max ± C max ± D max ± D ± max ± E ± max ± F 8.0.2± max ± ±0.20 G.0.2± max ± ±0.20 W ( ) Reference size This product qualify for AEC-Q200, but it has some deviations. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-6

9 Aluminum Electrolytic Capacitors/ S High tempature Lead-Free reflow Products (V) Case size Specification Min. Packaging Q'ty Ripple Size Current Reflow Dia. Length Endurance (RoHS:compliant) Code (120 Hz) (120 Hz) (+85 C) (+20 C) (μf) (ma r.m.s.) (hours) B EEE0JA0AR (5) (B) EEE0JA0WAR (5) C EEE0JA470AR (5) (C) EEE0JA1WAR (5) D EEE0JA1AP (5) D EEE0JA1XAP (5) E EEE0JA1AP (7) (F) EEE0JA471UAP (7) G EEE0JA2AP (7) (G) EEE0JA152UAP (7) (B) EEE1AA0WAR (5) (B) EEE1AA0WAR (5) C EEE1AA0AR (5) (C) EEE1AA470WAR (5) (C) EEE1AA1WAR (5) D EEE1AA1AP (5) D EEE1AA1XAP (5) E EEE1AA1AP (7) F EEE1AA1AP (7) (F) EEE1AA471UAP (7) G EEE1AA471AP (7) (G) EEE1AA2UAP (7) B EEE1CA0AR (5) (B) EEE1CA0WAR (5) C EEE1CA0AR (5) (C) EEE1CA0WAR (5) (C) EEE1CA470WAR (5) D EEE1CA470AP (5) (D) EEE1CA1WAP (5) E EEE1CA1AP (7) D EEE1CA1XAP (5) (F) EEE1CA1UAP (7) (F) EEE1CA1UAP (7) G EEE1CA1AP (7) (F) EEE1CA471UAP (7) G EEE1CA471AP (7) B EEE1EA4R7AR (5) (B) EEE1EA0WAR (5) C EEE1EA0AR (5) (C) EEE1EA0WAR (5) D EEE1EA0AP (5) (C) EEE1EA0WAR (5) D EEE1EA0AP (5) (D) EEE1EA470WAP (5) (E) EEE1EA1UAP (7) D EEE1EA1XAP (5) F EEE1EA1AP (7) (F) EEE1EA1UAP (7) G EEE1EA1AP (7) (F) EEE1EA1UAP (7) G EEE1EA1AP (7) (G) EEE1EA471UAP (7) 500 Size code( ):Miniaturization product Please refer to the page of Reflow Profile and The Dimensions. When requesting vibration-proof product, please put the last V instead to P Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-7

10 Aluminum Electrolytic Capacitors/ S High tempature Lead-Free reflow Products Case size Specification Min. Packaging Q'ty Ripple Size Current Reflow Dia. Length Endurance (RoHS:compliant) Code (120 Hz) (120 Hz) (+85 C) (+20 C) (V) (μf) (ma r.m.s.) (hours) B EEE1VA4R7AR (5) (B) EEE1VA0WAR (5) C EEE1VA0AR (5) (C) EEE1VA0WAR (5) D EEE1VA0AP (5) (D) EEE1VA0WAP (5) E EEE1VA0AP (7) (D) EEE1VA470WAP (5) E EEE1VA470AP (7) D EEE1VA1XAP (5) (F) EEE1VA1UAP (7) G EEE1VA1AP (7) (F) EEE1VA1UAP (7) G EEE1VA1AP (7) (G) EEE1VA1UAP (7) B EEE1HARAR (5) B EEE1HARAR (5) B EEE1HARAR (5) B EEE1HAR47AR (5) B EEE1HA1R0AR (5) B EEE1HA2R2AR (5) B EEE1HA3R3AR (5) (B) EEE1HA4R7WAR (5) C EEE1HA4R7AR (5) (C) EEE1HA0WAR (5) D EEE1HA0AP (5) (D) EEE1HA0WAP (5) E EEE1HA0AP (7) (E) EEE1HA0UAP (7) D EEE1HA0XAP (5) F EEE1HA0AP (7) D EEE1HA470XAP (5) (F) EEE1HA470UAP (7) G EEE1HA470AP (7) (F) EEE1HA1UAP (7) G EEE1HA1AP (7) (G) EEE1HA1UAP (7) 500 Size code( ):Miniaturization product Please kindly accept last shipment : 31/Mar/2015 Please refer to the page of Reflow Profile and The Dimensions. When requesting vibration-proof product, please put the last V instead to P Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar EEE-8

11 F±0.5 fd±0.05 Aluminum Electrolytic Capacitors/ KS Radial Lead Type Series: KS Type: A Features Endurance : 85 C 00 h 5 mm height RoHS directive compliant Low Profile KS 5 mm height KA 7 mm height M Specifications Category Temp. Range 40 C to +85 C Rated Range Nominal Range Capacitance Tolerance DC Leakage Current Endurance Shelf Life 4 V.DC to 50 V.DC 2.2 μf to 0 μf ±20 % (120 Hz/+20 C) I < 0.01 CV or 3 (μa) After 2 minutes (Whichever is greater) Please see the attached standard products list After applying rated working voltage for 00 hours at +85 C±2 C, when the capacitors are restored to 20 C capacitors, shall meet the following limits. Capacitance change ± 20% of initial measured value (4 V : ±30 %) DC leakage current < 200 % of initial specified value < initial specified value After storage for 00 hours at +85 C±2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) 50, k k to Correction factor Dimensions in mm (not to scale) (Unit : mm) Sleeve + L± min. 3 min. 0D±0.5 Body Dia. 0D Lead Dia. 0d Lead space F Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May EEE-123

12 Aluminum Electrolytic Capacitors/ KS Standard Products (V) (μf) Case size Specification Lead Length Dia. Length Ripple Current (120 Hz) (+85 C) (ma r.m.s.) (120 Hz) (+20 C) Lead Dia. Straight Lead Space B i Endurance : 85 C 00 h Min. Packaging Q'ty Straight Leads ECEA0GKS0( ) ECEA0GKS470( ) ECEA0GKS1( ) ECEA0GKS1( ) ECEA0JKS0( ) ECEA0JKS0( ) ECEA0JKS470( ) ECEA0JKS1( ) ECEA0JKS1( ) ECEA0JKS1Q ECEA1AKS0( ) ECEA1AKS0( ) ECEA1AKS470( ) ECEA1AKS1( ) ECEA1AKS1( ) ECEA1AKS1Q ECEA1CKS0( ) ECEA1CKS0( ) ECEA1CKS0( ) ECEA1CKS470( ) ECEA1CKS1( ) ECEA1CKS1Q ECEA1EKS4R7( ) ECEA1EKS0( ) ECEA1EKS0( ) ECEA1EKS0( ) ECEA1EKS1( ) ECEA1EKS1Q ECEA1VKS3R3( ) ECEA1VKS4R7( ) ECEA1VKS0( ) ECEA1VKS0( ) ECEA1VKS0( ) ECEA1VKS0Q ECEA1VKS470( ) ECEA1VKS470Q ECEA1HKS0R1( ) ECEA1HKSR( ) ECEA1HKSR( ) ECEA1HKSR47( ) ECEA1HKS0( ) ECEA1HKS2R2( ) ECEA1HKS3R3( ) ECEA1HKS4R7( ) ECEA1HKS0( ) ECEA1HKS0( ) ECEA1HKS0Q 00 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. Please refer to the page of Dimensions. Please kindly accept last shipment : 31/Mar/2015 Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May EEE-124

13 F±0.5 fd±0.05 Aluminum Electrolytic Capacitors/ KA Radial Lead Type Series: KA Type: A Features Endurance : 85 C 00 h 7 mm height RoHS directive compliant Low Profile KA 7 mm height M Specifications Category Temp. Range 40 C to +85 C Rated Range Nominal Range Capacitance Tolerance DC Leakage Current Endurance Shelf Life 4 V.DC to 50 V.DC 2.2 μf to 470 μf ±20 % (120 Hz/+20 C) I < 0.01 CV or 3 (μa) After 2 minutes (Whichever is greater) Please see the attached standard products list After applying rated working voltage for 00 hours at +85 C±2 C when the capacitors are restored to 20 C, capacitors shall meet the following limits. Capacitance change ± 20% of initial measured value DC leakage current < 200 % of initial specified value < initial specified value After storage for 00 hours at +85 C±2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) 50, k k to Correction factor Dimensions in mm (not to scale) (Unit : mm) Sleeve + L± min. 3 min. 0D±0.5 Body Dia. 0D Lead Dia. 0d Lead space F Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Apr EEE-119

14 Aluminum Electrolytic Capacitors/ KA Standard Products (V) (μf) Case size Specification Lead Length Dia. Length Ripple Current (120 Hz) (+85 C) (ma r.m.s.) (120 Hz) (+20 C) Lead Dia. Straight Lead Space B i Endurance : 85 C 00 h Min. Packaging Q'ty Straight Leads ECEA0GKA470( ) ECEA0GKA1( ) ECEA0GKA1( ) ECEA0GKA1( ) ECEA0GKA1Q ECEA0GKA471( ) ECEA0GKA471Q ECEA0JKA470( ) ECEA0JKA1( ) ECEA0JKA1( ) ECEA0JKA1( ) ECEA0JKA1Q ECEA1AKA0( ) ECEA1AKA1( ) ECEA1AKA1( ) ECEA1AKA1Q ECEA1CKA0( ) ECEA1CKA0( ) ECEA1CKA0( ) ECEA1CKA470( ) ECEA1CKA1( ) ECEA1EKA0( ) ECEA1EKA0( ) ECEA1EKA0( ) ECEA1EKA470( ) ECEA1VKA0( ) ECEA1VKA0( ) ECEA1VKA0( ) ECEA1VKA470( ) ECEA1VKA470Q ECEA1HKA0R1( ) ECEA1HKAR( ) ECEA1HKAR( ) ECEA1HKAR47( ) ECEA1HKA0( ) ECEA1HKA2R2( ) ECEA1HKA3R3( ) ECEA1HKA4R7( ) ECEA1HKA0( ) ECEA1HKA0( ) ECEA1HKA0( ) ECEA1HKA0Q 00 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. Please refer to the page of Dimensions. Please kindly accept last shipment : 31/Mar/2015 Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Apr EEE-120

15 F±0.5 fd±0.05 Aluminum Electrolytic Capacitors/ GA Radial Lead Type Series: GA Type: A Features Endurance : 5 C 00 h RoHS directive compliant Specifications Category Temp. Range 55 C to +5 C Rated Range V.DC to 50 V.DC Nominal Range 1.5 μf to 0 μf Capacitance Tolerance ±20 % (120 Hz/+20 C) DC Leakage Current I < 0.01 CV or 3 (μa) After 2 minutes (Whichever is greater) Please see the attached standard products list Endurance Shelf Life After following life test with DC voltage and +5 C±2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 00 hours, when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Capacitance change ±20 % of initial measured value < 200 % of initial specified value DC leakage current < initial specified value After storage for 00 hours at +5 C±2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) (V.DC) Cap (μf) k k 0 k to to to Dimensions in mm(not to scale) (Unit : mm) Sleeve + L± min. 3 min. 0D±0.5 Body Dia. 0D Lead Dia. 0d Lead space F Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May EEE-7

16 Aluminum Electrolytic Capacitors/ GA Standard Products (V) (μf) Case size Specification Lead Length Dia. Ripple Endur- Current ance Length (120 Hz) (120 Hz) (+5 C) (+20 C) (ma r.m.s.) (hours) Lead Dia. Straight Lead Space B H Endurance : 5 C 00 h Min. Packaging Q'ty Straight Leads EEAGA1A0( ) EEAGA1A0( ) EEAGA1A470( ) EEAGA1A680( ) EEAGA1A1( ) EEAGA1A1( ) EEAGA1C0( ) EEAGA1C150( ) EEAGA1C0( ) EEAGA1C0( ) EEAGA1C470( ) EEAGA1C1( ) EEAGA1E0( ) EEAGA1E150( ) EEAGA1E0( ) EEAGA1E0( ) EEAGA1E680( ) EEAGA1V6R8( ) EEAGA1V0( ) EEAGA1V150( ) EEAGA1V0( ) EEAGA1V470( ) EEAGA1HR( ) EEAGA1HR15( ) EEAGA1HR( ) EEAGA1HR( ) EEAGA1HR47( ) EEAGA1HR68( ) EEAGA1H1R0( ) EEAGA1H1R5( ) EEAGA1H2R2( ) EEAGA1H3R3( ) EEAGA1H4R7( ) EEAGA1H6R8( ) EEAGA1H0( ) EEAGA1H150( ) EEAGA1H0( ) EEAGA1H0( ) When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, H=2.5 mm. Suffix "BQ" for 08 7, 5mm pitch products Please refer to the page of Dimensions. Please kindly accept last shipment : 31/Mar/2015 Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May EEE-8