ACCESSORIES. DIVIDER BROWSER SHELF Estey Shelving Price List MAGAZINE SHELF A-FRAME MEDIA/PAPERBACK SHELF FLAT SHELVES CASTER KITS

Transcription

1 ACCESSORIES DIVIDER BROWSER SHELF Estey Shelving Price List CAT. NO. W D H WT. PRICE BRS3611A EXTRA DIVIDER 3/ / BRSDIV11 Ideal for storing a wide variety of media items. Shelf includes 5 dividers and an attractive front profile. A-FRAME MAGAZINE SHELF CAT. NO. W D H WT. PRICE DSDMS36LF Perfect for any retail environment, our magazine shelf includes 8 fixed dividers to showcase your periodicals. MEDIA/PAPERBACK SHELF CAT. NO. W D H WT. PRICE DSDAV Our zig-zag design is the perfect solution when displaying Blu-rays, DVDs, CDs, audio books, paperbacks and more. FLAT SHELVES CAT. NO. W D H WT. PRICE ED3608A ED3609A ED3610A ED3611A ED3612A Display hard backed books and other media with our attractive, adjustable shelf CAT. NO. WT. CASTER KITS DSCK-S W D H CASTER KIT FOR STARTER UNIT 2 with brakes, 2 without brakes 4.0 PRICE DSCK-S CAT. NO. DSCK-A W D H WT. CASTER KIT FOR ADDER UNIT 1 with brake, 1 without brake 2.0 PRICE DSCK-A Adding 3" diameter swivel casters to your A-Frame Display Shelving System allows you to adapt your library space as your needs evolve. 64 NOTE: A-Frame display shelving does not support ANY other accessories, aside from those listed above. EFFECTIVE AUGUST 15, 2018

2 TABLE OF CONTENTS 2Table of Contents Policies & Services Introduction to Estey 2.5" Weld Frame About the 2.5" Weld Frame System Shelving Units Frames & Frame Accessories Base Shelves Shelves, Brackets, Dividers, Shims Periodical, Sloped, Storage and Integral Back Shelves Storage, Reference and Specialty Shelves Cabinets, Trays & Accessories Newspaper Rack, Wall Hung Columns & Accessories Book Supports, Fillers, End Brackets Backstops, Base Filler Closures Canopy Tops & Accessories Gussets & Fillers End Panels and Backs Designer Series Display Units & Divider Units Uprights & Accessories Shelves, Dividers, Brackets, Struts Cabinets, Trays, Newspaper Rack & Accessories Specialty Shelves Book Supports, Fillers, Backstops Wall Hung Columns, Miscellaneous Accessories Canopy Tops, Brackets, Signage, Gussets End Panels & Backs 2" Weld Frame About the 2" Weld Frame System Shelving Units Frames & Frame Accessories Base Shelves Shelves, Brackets, Dividers, Shims Periodical, Sloped, Storage and Integral Back Shelves Storage, Reference and Specialty Shelves Cabinets, Trays & Accessories Newspaper Rack, Wall Hung Columns & Accessories Book Supports, Fillers, End Brackets Backstops, Base Filler Closures Canopy Tops & Accessories Gussets & Fillers End Panels and Backs A-Frame Shelving Units Accessories

3 POLICIES AND SERVICES POLICY AND SERVICES PRICING: All prices are F.O.B. Tennsco Corp s Facility in Dickson, Tennessee. All orders are subject to final acceptance at the Home Office, Dickson, Tennessee. Prices subject to change without notice. Tennsco has the right to make product design changes at any time. Tennsco s prices do not include sales, use, excise or similar taxes. Consequently, in addition to the prices specified herein, the amount of any present or future sales, use, excise or similar tax applicable to the manufacture, sale, purchase or use of the goods sold hereunder shall be paid by Buyer. In lieu thereof, Buyer shall provide Seller with a tax exemption certificate acceptable to the applicable taxing authorities. TERMS OF PAYMENT: Terms are Net 30 Days from date of shipment. A service charge of 1 1/2% per month will be charged for overdue invoices. MINIMUM ORDERS: Minimum order is $ SPECIFICATIONS: Tennsco reserves the right to change any product specifications contained in this price list. FREIGHT CHARGES: All shipments will be made freight collect unless otherwise specified. If freight is prepared, it will be added to the invoice or billed separately, depending on arrangements. On shipments by parcel post, the postage will be added to the invoice. All routing will be done solely by the Home Office. If purchaser does not accept delivery of merchandise when ready for shipment, storage fees will be charged to the purchaser. WEIGHT: Weights shown are approximate. FREIGHT CLAIMS: Claims for shortages must be made in writing to the Home Office within 5 business days from receipt of shipment. Claims for damaged or lost material must be filed with the carrier. Policies & Services CAUTION: When you give delivering carrier a clear receipt for a shipment in which there is damaged merchandise or a shortage, the carrier is relieved of further responsibility. Claims for damage or shortage must be filed by you with the delivering carrier. Tennsco will not accept return of merchandise damaged in transit. Your claim is with the delivering carrier. PARTIAL SHIPMENTS: Tennsco reserves the right to make delivery in installments unless otherwise expressly stated herein. All such installments shall be separately invoiced and paid for when due, without regard to subsequent deliveries. Delay in delivery of all installments shall not relieve Buyer of its obligations to accept remaining deliveries. SHIPPING TIME: Shipping dates are estimates only, based on standard manufacturing times. Tennsco makes every effort to meet shipping date requests, but will not be held liable for missed shipping dates. Once items are shipped, Tennsco is not responsible for delays caused by the delivering carrier. This includes, but is not limited to, delays in installation proceedings due to slow delivery by carrier. CANCELLATIONS & RETURNS: Orders for Special items are not subject to change or cancellation. Special colors and textured colors cannot be returned. All returns are subject to approval. No return merchandise will be accepted without written consent of the General Office, Dickson, Tennessee. All returned shipments are subject to a handling charge of 25% plus all transportation charges incurred by Tennsco unless Tennsco is at fault. Once production of Special items has begun, cancellation of order is subject to Tennsco approval. A 15% surcharge will be assessed to approved cancelled items. CODE RESTRICTIONS: Local building codes vary. It is the purchaser s responsibility to determine that product installation is in accordance with local requirements. LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. Tennsco s warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons not authorized by Seller, where goods are damaged during shipment. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW: a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED. b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER S OPTION AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyer s place of business or require Buyer to return the goods to Seller for inspection on Seller s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above. 3

4 Introduction to Estey 4Introduction To Estey Designer Series Shelving European styling was the inspiration behind the Estey Designer Series Library Shelving. Cantilever Library Shelving Estey Cantilever Library Shelving is designed to be functional, versatile and aesthetically beautiful. Cantilever Library Shelving offers a 2" Weld Frame option and a 2.5" Weld Frame option. A-Frame Display Shelving A-Frame Display Shelving offers a clean, modern style, perfect for any library environment. FOR ESTEY COLORS, PLEASE REFER TO ESTEY'S COLOR CARD (AVAILABLE UPON REQUEST).

5 THE 2.5" WELD FRAME SYSTEM Estey Weld Frame construction eliminates the need for sway bracing and separate starter/adder units. All Units Feature: Basic Shelving Components: Upright slot spacing 1" on centers in a 6" Welded frames repeat pattern for easy shelf alignment. Base brackets Upright posts have 8 right angle bends for Base shelf added strength. Adjustable shelves and brackets Six-point leveling system per double-face section; Kickplate(s) (black powder coat finish) four-point leveling system per single face section (adjustable levelers provided on both base units). Base shelves available in one-piece pan, or in multiple-piece construction with kickplate(see below). Electrostatically applied/baked-on epoxy/polyester powder coated finish. 2.5" Weld Frame FIXED BASE SHELF ADJUSTABLE (KICKPLATE) BASE SHELF NOTE: All shelf depths in this catalog are expressed in nominal sizes. Base shelf dimensions will actually be greater than those shown; all other shelf sizes will be 1" less. Contact factory for specific dimensions. 5

6 SHELVING UNITS - 36" WIDE FIXED & ADJUSTABLE BASE SINGLE FACE* *All single face shelving must be wall anchored. 62.5" Weld Frame 60 WF41080 WF71080 WF91080 WF61080 WF81080 FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. WF810802); for 30" units, add "3" (e.g. WF810803). BASE DEPTH 42" HIGH, 3 LEVELS WF WA " 8" WF WA " 10" WF WA " 9" WF WA " 10" WF WA " 10" WF WA " 12" WF WA " 12" 66" HIGH, 5 LEVELS WF WA " 8" WF WA " 10" WF WA " 9" WF WA " 10" WF WA " 10" WF WA " 12" WF WA " 12" 78" HIGH, 6 LEVELS WF WA " 8" WF WA " 10" WF WA " 9" WF WA " 10" WF WA " 10" WF WA " 12" WF WA " 12" 84" HIGH, 7 LEVELS WF WA " 8" WF WA " 10" WF WA " 9" WF WA " 10" WF WA " 10" WF WA " 12" WF WA " 12" 90" HIGH, 7 LEVELS WF WA " 8" WF WA " 10" WF WA " 9" WF WA " 10" WF WA " 10" WF WA " 12" WF WA " 12"

7 SHELVING UNITS - 36" WIDE FIXED & ADJUSTABLE BASE DOUBLE FACE FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH BASE DEPTH 42" HIGH, 3 LEVELS WF WA " 16" WF WA " 20" WF WA " 18" WF WA " 20" WF WA " 20" WF WA " 24" WF WA " 24" 66" HIGH, 5 LEVELS WF WA " 16" WF WA " 20" WF WA " 18" WF WA " 20" WF WA " 20" WF WA " 24" WF WA " 24" 78" HIGH, 6 LEVELS WF WA " 16" WF WA " 20" WF WA " 18" WF WA " 20" WF WA " 20" WF WA " 24" WF WA " 24" 84" HIGH, 7 LEVELS WF WA " 16" WF WA " 20" WF WA " 18" WF WA " 20" WF WA " 20" WF WA " 24" WF WA " 24" 90" HIGH, 7 LEVELS WF WA " 16" WF WA " 20" WF WA " 18" WF WA " 20" WF WA " 20" WF WA " 24" WF WA " 24" WF42080 WF72080 WF62080 WF " Weld Frame 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. WF820802); for 30" units, add "3" (e.g. WF820803). WF

8 INTEGRAL BACK DIVIDER UNITS - 36" WIDE FIXED & ADJUSTABLE BASE SINGLE FACE* *All single face shelving must be wall anchored. 82.5" Weld Frame 60 WBDF41080 WBDF61080 WBDF71080 WBDF81080 WBDF91080 WBDF01080 FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. WBDF811002); for 30" units, add "3" (e.g. WBDF811003). All units come with 5 dividers per shelf. Dividers are adjustable on 1" centers. BASE DEPTH 42" HIGH, 3 LEVELS WBDF WBDA " 10" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 16" 66" HIGH, 5 LEVELS WBDF WBDA " 10" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 16" 78" HIGH, 6 LEVELS WBDF WBDA " 10" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 16" 84" HIGH, 7 LEVELS WBDF WBDA " 10" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 16" 90" HIGH, 7 LEVELS WBDF WBDA " 10" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 16" 93" HIGH, 8 LEVELS WBDF WBDA " 10" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 12" WBDF WBDA " 13" WBDF WBDA " 16"

9 INTEGRAL BACK DIVIDER UNITS - 36" WIDE FIXED & ADJUSTABLE BASE DOUBLE FACE WBDF42100 FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH BASE DEPTH 42" HIGH, 3 LEVELS WBDF WBDA " 20" WBDF WBDA " 24" WBDF WBDA " 26" WBDF WBDA " 24" WBDF WBDA " 26" WBDF WBDA " 32" 66" HIGH, 5 LEVELS WBDF WBDA " 20" WBDF WBDA " 24" WBDF WBDA " 26" WBDF WBDA , " 24" WBDF , WBDA , " 26" WBDF , WBDA , " 32" 78" HIGH, 6 LEVELS WBDF , WBDA , " 20" WBDF , WBDA , " 24" WBDF , WBDA , " 26" WBDF , WBDA , " 24" WBDF , WBDA , " 26" WBDF , WBDA , " 32" 84" HIGH, 7 LEVELS WBDF , WBDA , " 20" WBDF , WBDA , " 24" WBDF , WBDA , " 26" WBDF , WBDA , " 24" WBDF , WBDA , " 26" WBDF , WBDA , " 32" 90" HIGH, 7 LEVELS WBDF , WBDA , " 20" WBDF , WBDA , " 24" WBDF , WBDA , " 20" WBDF , WBDA , " 24" WBDF , WBDA , " 26" WBDF , WBDA , " 32" 93" HIGH, 8 LEVELS WBDF , WBDA , " 20" WBDF , WBDA , " 24" WBDF , WBDA , " 20" WBDF , WBDA , " 24" WBDF , WBDA , " 26" WBDF , WBDA , " 32" 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. WBDF821002); for 30" units, add "3" (e.g. WBDF821003). WBDF62100 WBDF72100 WBDF82100 WBDF " Weld Frame All units come with 5 dividers per shelf. Dividers are adjustable on 1" centers. WBDF

10 INTEGRAL BACK UNITS - 36" WIDE FIXED & ADJUSTABLE BASE SINGLE FACE* *All single face shelving must be wall anchored. 2.5" Weld Frame WFIB41080 WFIB71080 WFIB61080 WFIB81080 FIXED BASE CAT. NO. WT. PRICE ADJUSTABLE BASE CAT. NO. WT. PRICE SHELF DEPTH BASE DEPTH 42" HIGH, 3 LEVELS WFIB WAIB " 8" WFIB WAIB " 10" WFIB WAIB " 9" WFIB WAIB " 10" WFIB WAIB " 10" WFIB WAIB " 12" WFIB WAIB " 12" 66" HIGH, 5 LEVELS WFIB WAIB " 8" WFIB WAIB " 10" WFIB WAIB " 9" WFIB WAIB " 10" WFIB WAIB " 10" WFIB WAIB " 12" WFIB WAIB " 12" 78" HIGH, 6 LEVELS WFIB WAIB " 8" WFIB WAIB " 10" WFIB WAIB " 9" WFIB WAIB " 10" WFIB WAIB " 10" WFIB WAIB " 12" WFIB WAIB " 12" 84" HIGH, 7 LEVELS WFIB WAIB " 8" WFIB WAIB " 10" WFIB WAIB " 9" WFIB WAIB " 10" WFIB WAIB " 10" WFIB WAIB " 12" WFIB WAIB " 12" 90" HIGH, 7 LEVELS WFIB WAIB " 8" WFIB WAIB " 10" WFIB WAIB " 9" WFIB WAIB " 10" WFIB WAIB " 10" WFIB WAIB " 12" WFIB WAIB " 12" Units come with one wire divider per shelf level. 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. WFIB810802); for 30" units, add "3" (e.g. WFIB810803). EXTRA DIVIDERS EWD-1 3 / / EWD-2 3 / / WFIB

11 INTEGRAL BACK UNITS - 36" WIDE FIXED & ADJUSTABLE BASE DOUBLE FACE FIXED BASE ADJUSTABLE BASE SHELF BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE DEPTH DEPTH 42" HIGH, 3 LEVELS WFIB WAIB " 16" WFIB WAIB " BASE 20" WFIB WAIB " DEPTH 18" WFIB WAIB " 20" WFIB WAIB " 20" WFIB WAIB " 24" WFIB WAIB " 24" 66" HIGH, 5 LEVELS WFIB WAIB " 16" WFIB WAIB " 20" WFIB WAIB " 18" WFIB WAIB " 20" WFIB WAIB " 20" WFIB WAIB " 24" WFIB WAIB " 24" 78" HIGH, 6 LEVELS WFIB WAIB " 16" WFIB WAIB " 20" WFIB WAIB " 18" WFIB WAIB " 20" WFIB WAIB " 20" WFIB WAIB " 24" WFIB WAIB " 24" 84" HIGH, 7 LEVELS WFIB WAIB " 16" WFIB WAIB " 20" WFIB WAIB " 18" WFIB WAIB " 20" WFIB , WAIB , " 20" WFIB , WAIB , " 24" WFIB , WAIB , " 24" 90" HIGH, 7 LEVELS WFIB WAIB " 16" WFIB WAIB " 20" WFIB WAIB " 18" WFIB WAIB " 20" WFIB , WAIB , " 20" WFIB , WAIB , " 24" WFIB , WAIB , " 24" WFIB42080 WFIB62080 WFIB72080 WFIB " Weld Frame Units come with one wire divider per shelf level. 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. WFIB820802); for 30" units, add "3" (e.g. WFIB820803). EXTRA DIVIDERS EWD-1 3 / / EWD-2 3 / / WFIB

12 PERIODICAL DISPLAY UNITS, DISPLAY SHELF UNITS PERIODICAL DISPLAY UNITS Pivoting periodical shelving with flat storage shelf. With 12" storage shelves & 12" fixed base single face or 24" fixed base double face. 2.5" Weld Frame WP61120 WP " wide units are available at a 25% upcharge. Contact factory for weights. CAT. NO. SLOPING SHELVES STORAGE LEVELS W D H WT. PRICE SINGLE FACE* WP WP WP WP WP WP WP WP WP WP DOUBLE FACE WP WP WP , WP , WP921203** , WP WP WP , WP , WP92120** , A canopy top will not fit on 42" high units. *All single face shelving must be wall anchored. **Overhead top bracing recommended. DISPLAY SHELF UNITS Ideal for displaying various periodicals, new books or other media items. Lower shelves are sloped 10 o for better visualization WFDS636 CAT. NO. SLOPING SHELVES STORAGE LEVELS W D H WT. PRICE SINGLE FACE* WFDS WFDS WFDS WFDS936** DOUBLE FACE WFDD WFDD , WFDD , WFDD936** , *All single face shelving must be wall anchored. **Overhead top bracing recommended. WFDD " wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights.

13 FRAMES & FRAME ACCESSORIES WELDED FRAMES CAT. NO. DESCRIPTION W D H WT. PRICE W / W / W / W / W / W / W / W / W / W / W / W / W / W / W / W / SEISMIC SWAY BRACES SSBR6030A For 66" and 78" frames SSBR7330A For 84", 90" and 93" frames SSBR6036A For 66" and 78" frames SSBR7336A For 84", 90" and 93" frames " wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. W42302) Special widths or heights are available. Contact factory for pricing. WELDED FRAMES 2.5" Weld Frame SEISMIC SWAY BRACES SEISMIC WELDED FRAMES SWF / SWF / SWF / SWF / SWF / SWF / Eliminates the need for sway braces. WELDED FRAME EXTENDER WFEXT / WFEXT / WFEXT / WFEXT36xx /2 Varies Varies Contact Factory Add to existing frames for more space. Available in a variety of sizes with a 12" minimum. Contact factory for pricing and weights on sizes not shown. 13

14 CLOSED BASE SHELVES WITH AND WITHOUT DIVIDERS CLOSED BASE SHELVES - SINGLE FACE 2.5" Weld Frame Comes complete with base brackets. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. WA3013A or WB3013A). Call factory for weights on 30" shelves. CLOSED BASE SHELVES - DOUBLE FACE Comes complete with base brackets. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. WA3013A or WB3013A). Call factory for weights on 30" shelves. FOR FIXED BASE SHELVES WB3608A / WB3609A / WB3610A / WB3612A / WB3613A / WB3616A / FOR ADJUSTABLE BASE SHELVES WA3608A / WA3609A / WA3610A / WA3612A / WA3613A / WA3616A / FOR FIXED BASE SHELVES WB3616DA / WB3618A / WB3620A / WB3624A / WB3626A / WB3632A / FOR ADJUSTABLE BASE SHELVES WA3616DA / WA3618A / WA3620A / WA3624A / WA3626A / WA3632A / CLOSED BASE SHELVES WITH INTEGRAL BACK AND DIVIDERS - SINGLE FACE Slotted on 1" centers for dividers, with 5" backstop. Five adjustable dividers provided per shelf. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. TBDF3010 or TBDA3010). Call factory for weights on 30" shelves. FOR FIXED BASE SHELVES TBDF / TBDF / TBDF / TBDF / FOR ADJUSTABLE BASE SHELVES TBDA / TBDA / TBDA / TBDA / CLOSED BASE SHELVES WITH INTEGRAL BACK AND DIVIDERS - DOUBLE FACE Slotted on 1" centers for dividers, with 5" backstop. Five adjustable dividers provided per shelf. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. TBDF3010 or TBDA3010). Call factory for weights on 30" shelves. FOR FIXED BASE SHELVES TBDF / TBDF / TBDF / TBDF / FOR ADJUSTABLE BASE SHELVES TBDA / TBDA / TBDA / TBDA /

15 INTEGRAL BACK BASE SHELVES, SLOPING BASE SHELVES INTEGRAL BACK BASE SHELVES - SINGLE FACE WIBBS3008A / WIBBS3009A / WIBBS3010A / WIBBS3012A / WIBBS3013A / WIBBS3016A / WIBBS3608A / WIBBS3609A / WIBBS3610A / WIBBS3612A / WIBBS3613A / WIBBS3616A / DIVIDER ONLY EWD-1 3 / / EWD-2 3 / / WIBBS3018A / WIBBS3020A / WIBBS3024A / WIBBS3026A / WIBBS3032A / WIBBS3618A / WIBBS3620A / WIBBS3624A / WIBBS3626A / WIBBS3632A / DIVIDER ONLY EWD-1 3 / / EWD-2 3 / / Includes one wire divider per opening and a 2" built-in backstop. If adjustable base is required, change "WIBBS" to "WIBBSA" when ordering (e.g. WIBBSAwwddA). Call factory for adjustable base pricing and weights. INTEGRAL BACK BASE SHELVES - DOUBLE FACE Includes one wire divider per opening and a 2" built-in backstop. If adjustable base is required, change "WIBBS" to "WIBBSA" when ordering (e.g. WIBBSAwwddA). Call factory for adjustable base pricing and weights. SLOPING BASE SHELVES - SINGLE FACE 2.5" Weld Frame WSB3009A / WSB3010A / WSB3012A / WSB3609A / WSB3610A / WSB3612A / VIDEO SLOPING BASE SHELVES (6 DIVIDERS INCLUDED) VC3012A / VC3612A / WSB3612A VC3612A Sloping Base Shelves and Video Sloping Base Shelves are sloped at 9 o, aiding visually those items displayed on the bottom shelf. Video Sloping Base Shelves are slotted on 1" centers for dividers, with 5" integral backstop; six adjustable dividers are provided. SLOPING BASE SHELVES - DOUBLE FACE WSB3018A / WSB3020A / WSB3024A / WSB3618A / WSB3620A / WSB3624A / VIDEO SLOPING BASE SHELVES (12 DIVIDERS INCLUDED) VC3012DA / VC3612DA / WSB3624A VC3612DA Sloping Base Shelves and Video Sloping Base Shelves are sloped at 9 o, aiding visually those items displayed on the bottom shelf. Video Sloping Base Shelves are slotted on 1" centers for dividers, with 5" integral backstop; twelve adjustable dividers are provided. 15

16 SHELVES, BRACKETS, DIVIDERS, SHIMS ADJUSTABLE SHELVES 2.5" Weld Frame Includes shelf brackets. Can be furnished in additional widths or depths; contact factory for pricing. ADJUSTABLE DIVIDER SHELVES Slotted on 1" centers to accommodate dividers. Includes 5" back, brackets and 5 adjustable dividers per shelf. BL3008A / BL3009A / BL3010A / BL3011A / BL3012A / BL3013A / BL3014A / BL3016A / BL3608A / BL3609A / BL3610A / BL3611A / BL3612A / BL3613A / BL3614A / BL3616A / BDA3010A / BDA3011A / BDA3012A / BDA3013A / BDA3016A / BDA3610A / BDA3611A / BDA3612A / BDA3613A / BDA3616A / SHELF BRACKETS LEFT BRACKET Attaches shelves to unit uprights. *NOTE: Listed catalog numbers are for left bracket only; for right bracket, change the suffix "L" to "R". DIVIDERS RIGHT BRACKET ASBRK08L* 1 / / ASBRK09L* 1 / / ASBRK10L* 1 / / ASBRK11L* 1 / / ASBRK12L* 1 / / ASBRK13L* 1 / / ASBRK14L* 1 / / ASBRK16L* 1 / / DIV07 DIV09 DIV12 SPD12 SHIMS Used to aid in the leveling of fixed base units. Zinc finish. CAT. NO. USE WITH D H WT. PRICE DIV07 7" - 9" Shelves DIV09 10" through 13" / DIV12 14" through 16" / SPD12 14" through 16" SHIM /2 1 /

17 THIS PAGE LEFT BLANK INTENTIONALLY THIS PAGE LEFT BLANK INTENTIONALLY 2.5" Weld Frame THIS PAGE LEFT BLANK INTENTIONALLY THIS PAGE LEFT BLANK INTENTIONALLY 17

18 ACCESSORIES: SPECIALTY SHELVES HINGED PERIODICAL DISPLAY SHELVES 2.5" Weld Frame PERIODICAL DISPLAY SHELF PERIODICAL DISPLAY SHELF WITH PLEXGLASS COVER Sloped for display. 14" high periodical surface. *Includes continuous label holder. FIXED SLOPED DISPLAY SHELVES SLOPED DISPLAY SHELF SLOPED DISPLAY SHELF WITH PLEXGLASS COVER Sloped for display. 12" periodical surface. *Includes continuous label holder. INTEGRAL BACK SHELVES PDS3012A PDS3612A PDS3012ACLH* PDS3612ACLH* WITH PLEXIGLASS COVER PDSCA PDSCA SDS3012A SDS3612A SDS3012ACLH* SDS3612ACLH* WITH PLEXIGLASS COVER SDSCA SDSCA Built-in 2" backstop keeps items organized. Includes brackets and one wire divider per shelf. For 30" shelf, change "BLIB36" to "BLIB30" (e.g. BLIB3016A). BLIB3608A / BLIB3609A / BLIB3610A / BLIB3611A / BLIB3612A / BLIB3613A / BLIB3616A / SLOPED INTEGRAL BACK SHELVES Built-in 2" backstop keeps items from falling off sloped shelf. For 30" shelf, change "SIBS36" to "SIBS30" (e.g. SIBS3016A). Shelves have a 7 o slope. SIBS3608A / SIBS3609A / SIBS3610A / SIBS3611A / SIBS3612A / MULTIPURPOSE DISPLAY SHELVES AS SLOPING DISPLAY SHELF AS INTEGRAL BACK SHELF Two-positional shelf allows you to have either a sloping display shelf or (reversed) an integral back shelf. Ideal for displaying video tapes, audio cassettes, art books, etc. MULTIPURPOSE BASE SHELVES SINGLE ENTRY DOUBLE ENTRY Two-positional shelf can be used as either a sloping display shelf or (reversed) an integral back shelf. Divider shelves come with 6 dividers. CAT. NO. TYPE W D H WT. PRICE MP3610A No Dividers MPD3610A With Dividers Divider shelves come with 6 dividers. CAT. NO. TYPE W D H WT. PRICE SINGLE ENTRY MPB3610A No Dividers MPDB3610A With Dividers DOUBLE ENTRY MPB3620A No Dividers MPDB3620A With Dividers

19 ACCESSORIES: SPECIALTY SHELVES STORAGE SHELVES IN3610A / IN3612A / IN3613A / IN3614A / IN3616A / IN3618A / IN3619A / Used with sloped display shelves (at left on page 16), or any place where a flat shelf is desired. For 30" shelf, change "IN36" to "IN30" (e.g. IN3010A) FODSA /4 5 9 / Used to display compact discs and DVDs. Shelf has a 7 o slope. FACE-OUT DISPLAY SHELF VIDEO CASSETTE/PAPERBACK BOOK SHELF 2.5" Weld Frame VCS3007A / VCS3008A / VCS3607A / VCS3608A / DIV07 (DIVIDER ONLY) SRS3008A SRS3009A SRS3010A SRS3012A SRS3608A SRS3609A SRS3610A SRS3612A Slopes to allow convenient viewing of spines on paperbacks and video cassettes. Six adjustable dividers included per shelf. SLIDING REFERENCE SHELVES* *Brackets included. Used with sloped display shelves (at left on page 16), or any place where a flat shelf is desired. For 30" shelf, change "IN36" to "IN30" (e.g. IN3010A) DOUBLE TIER VIDEO CASSETTE & AUDIO CASSETTE SHELVES VIDEO CASSETTE SHELF VCDT VCDT AUDIO CASSETTE/MICROFILM SHELF SPMF30A / SPMF36A / VCDT3014 SPMF30A Double Tier Video Cassette Shelf is used with compact discs, video cassettes, or paperbacks. Sloped; 36" wide shelf holds 60 videotapes or 160 compact discs. Audio Cassette Shelf stores microfilm or audio cassettes. Capacity: 100 cassettes (36" wide shelf). ZZ3008A / ZZ3608A / INSERT ONLY ZZPD ZIG-ZAG SHELF ZZ3608A Adjustable shelf with paperback insert. Ideal for displaying audio cassette or paperback books. 19

20 ACCESSORIES: CABINETS, TRAYS & MISC. ACCESSORIES CABINETS 2.5" Weld Frame Cabinet Only All welded construction. Ideal for storing valuable items that need to be secured. Includes flipper door and lock with two keys. MEDIA HANGER RACK Consists of brackets with hanger rod for clear-view plastic media bags. WORK SHELF AND BRACKETS WORK SHELF WITH BRACKETS Cabinet With 2 Pull-Out Frames LEGS CABINET ONLY FDCB36L / / , CABINET WITH 1 PULL-OUT FRAME CBFD36LFA / / , CABINET WITH 2 PULL-OUT FRAMES CBFD36L2FA / / , FRAME ONLY FRAME36A HB30A /2 4 1 / HB36A /2 4 1 / LC54A / , LCL (Legs Only, Per Pair) LCBRK24L (Left Bracket Only) LCBRK24R (Right Bracket Only) " deep plastic shelf laminate supported by two steel triangular brackets for work surface with shelving range. Must state desired finish of work shelf. METAL TRAYS Handy metal trays store a wide variety of media. Use alone or in conjunction with Estey cabinets. FOR COMPACT DISCS TRCD514A 5 1 / /8 4 1 / CDD-1 (Divider Only) FOR AUDIOCASSETTES TRAC414A 4 7 / /8 3 1 / ACD-1 (Divider Only) FOR VHS TAPES TRVHS714A 7 5 / /8 3 1 / VHSD-1 (Divider Only) FOR 3x5 CARDS TRCRD3X5A 5 3 / /8 3 1 / CRDD-1 (Divider Only) METAL BROWSING BOX BROWSING BOX DIVIDER Ideal for storing all media items. Includes 2 wire dividers. BRB3005A /2 5 1 / BRB3605A /2 5 1 / BRBWD (Divider Only) PULL-OUT BROWSING BOX A pull out browsing box mounted on full extension ball-bearing suspensions. Ideal for storing all media items. XBRB3611A includes 2 wire dividers; XDBRB3611A includes 4 plate type dividers. XBRB43611A XHDBRB3611A NOTE: The original XBRB3611A, with full-height front, is still available for a list price of $ and a weight of 30 lbs. Contact factory for further details. WITH SLIDING DIVIDER XBRB43611A /2 5 1 / TXBWD (Divider Only) WITH PLATE-TYPE DIVIDER and 3" FRONT XHDBRB3611A /2 5 1 / BRBDIVA (Divider Only)

21 ACCESSORIES: BRACING, LABELING ACCESSORIES NEWSPAPER RACK CAT. NO. TYPE W D H WT. PRICE NPR6 6 Holders NPR10 10 Holders , Displays newspapers. Newspaper sticks included. PILWCH / PILWCH / PILWCH / PILWCH / PILWCH / PILWCH / PILWCH / PILWCH / PILWCH / PILWCH / WALL HUNG COLUMNS Slotted strip attaches to wall. Designed to accept all components or accessory items. Special heights available. Hardware not included because of various wall construction. 2.5" Weld Frame SINGLE CARD HOLDER SCH-B 5 1 / / DOUBLE CARD HOLDER DCH-B 10 1 / / ALUMINUM HOLDER SCH-CA 5 5 / / CARD HOLDERS SCH-B DCH-B SCH-CA For 3" x 5" cards. Used on end panels. Attaches with double-sided tape. Steel holders are finished in black powder coat paint. TRANSVERSE OVERHEAD TOP TIE BRACING FOR WELD FRAME OTBW / Channel construction top tie furnished in 8 foot lengths. Recommended for added stabilization when bases and shelves are of equal depths. SLH 5 1 / / Plastic clip-on holder 5 /8" x 5" card. (Paper not included) SHELF LABEL HOLDER WALL CLIP WCLIP Used to attach single face units to the wall for support. Wall hardware not included. RFP /4 3 1 / For use on end panels or uprights for identification of range contents. Attaches with double-sided tape. Holds two 3" x 5" cards. Finished in black. RANGE FINDER 21

22 ACCESSORIES: BOOK SUPPORTS, FILLER, END BRACKETS STEEL BOOK SUPPORTS 2.5" Weld Frame HOOK-ON BOOK SUPPORTS WITH CORK BACKING BSN6 4 9 / / BSN9 4 9 / / WITH MAGNETIC STRIP BSM6 4 9 / / BSM9 4 9 / / Unattached book support used on surface of shelves. Furnished with cork backing or a magnetic strip, as specified above. LOBS6 4 9 / / LOBS9 4 9 / / Hooks onto return flange of adjustable shelves for rigid support. WIRE BOOK SUPPORTS 6-INCH "V" SUPPORT 7-INCH "W" SUPPORT CAT. NO. TYPE W D H WT. PRICE WBS6 "V" 3 / WBS9 "V" 3 / WBSW7 "W" 3 / WBSW9 "W" 3 / Heavy spring wire book support. Attaches to underside of shelf. Easily adjustable. 9-INCH "V" SUPPORT 9-INCH "W" SUPPORT SHELF FILLER SHFIL / SHFIL / Fills the space between adjustable shelves on double sided units, providing a continuous surface. Attaches with two clips that fasten to underside of shelves. SLOPED ADJUSTABLE END BRACKET LEFT BRACKET RIGHT BRACKET SASBRK08LJ* 1 / / SASBRK09LJ* 1 / / SASBRK10LJ* 1 / / SASBRK11LJ* 1 / / SASBRK12LJ* 1 / / SASBRK13LJ* 1 / / SASBRK14LJ* 1 / / Creates 7 degrees of slope for an adjustable shelf. *NOTE: Listed catalog numbers are for left bracket only; for right bracket, change the suffix "LJ" to "RJ".

23 ACCESSORIES: BACKSTOPS, BASE FILLERS, ANCHORS BASE FILLER CLOSURES FOR WELD FRAME BFC / BFC / Use to fill space between uprights when an adjustable base is used. BFC36 FOR MOBILE CARRIAGE BCC /2 1 3 / BCC /2 1 3 / Use to fill space between uprights when adjustable shelves are used on bottom of unit. ABS / Individual backstop designed to engage in upright slots for adjustability. BCC36 ADJUSTABLE BACKSTOP 2.5" Weld Frame REVERSIBLE BACKSTOP --- WIRE DIVIDER BACK STOP RBS / RBS / WIRE DIVIDER BSWBS / One side is a regular backstop. The other side is a sliding support backstop (when used with wire divider sold above). OFFSET CENTER BACKSTOP --- LARGE PROFILE CBS /8 3 9 / CBS /8 3 9 / Works as a backstop for each side of a double entry unit, eliminating the need for an individual backstop for each side. OFFSET CENTER BACKSTOP --- SMALL PROFILE CBSS / CBSS / Works as a backstop for each side of a double entry unit, eliminating the need for an individual backstop for each side. FLOOR ANCHOR FLRANCH / Used to anchor weld frame units to the floor. For use with weld frame base brackets only. Zinc plated 23

24 CANOPY TOPS & ACCESSORIES STEEL CANOPY TOPS 2.5" Weld Frame SINGLE FACE (CTS) DOUBLE FACE (CTD) BRACKETS WITH HARDWARE Keeps dust off your valuable materials. Includes attaching brackets. *Attaching bracket is also used to secure steel end panels (see page 24). Each pair consists of one left and one right bracket. SINGLE FACE CTS CTS CTS CTS CTS CTS CTS CTS CTS CTS CTS CTS DOUBLE FACE CTD CTD CTD CTD CTD CTD CTD CTD CTD CTD CTD CTD CANOPY BRACKETS FOR WOOD TOPS BRACKETS ONLY Used when wood or hard plastic canopy tops are used. For single face units, use 1 pair. For double face units, use 2 pairs. Each pair consists of one left an one right bracket. Wood top and hardware not included. CAT. NO. DEPTH WT. PRICE BRACKETS ONLY CTIB08S (1 Pair) CTIB09S (1 Pair) CTIB10S (1 Pair) CTIB12S (1 Pair) CTIB13S (1 Pair) CTIB16S (1 Pair) CTIB18S (1 Pair) CANOPY SIGNAGE CPSGN / / Material in aluminum. Cannot be painted Easily identify special items or sections with this customizable label holder. Three attachment clips provided.

25 GUSSETS AND FILLERS FIXED BASE/ADJUSTABLE BASE REINFORCING GUSSETS SINGLE FACE GS08-1AL (left) 1 / / GS08-1AR (right) 1 / / GS09-1AL (left) 1 / / GS09-1AR (right) 1 / / GS10-1AL (left) 1 / / GS10-1AR (right) 1 / / GS12-1AL (left) 1 / / GS12-1AR (right) 1 / / GS13-1AL (left) 1 / / GS13-1AR (right) 1 / / GS16-1AL (left) 1 / / GS16-1AR (right) 1 / / DOUBLE FACE GD08-1A 1 / / GD09-1A 1 / / GD10-1A 1 / / GD12-1A 1 / / GD13-1A 1 / / GD16-1A 1 / / GS10-1AL GS10-1AR GD10-1A Used when fixed base shelving units are to be mounted on mobile carriage bases or when additional stabilization is required. Also available for adjustable base shelving units; to order, add "J" to end of catalog number and call factory for pricing and weights (e.g. GS2-16LJA). MOBILE CARRIAGE REINFORCING GUSSETS 2.5" Weld Frame SINGLE FACE GS08CAL (left) 1 / / GS08CAR (right) 1 / / GS09CAL (left) 1 / / GS09CAR (right) 1 / / GS10CAL (left) 1 / / GS10CAR (right) 1 / / GS12CAL (left) 1 / / GS12CAR (right) 1 / / GS13CAL (left) 1 / / GS13CAR (right) 1 / / GS16CAL (left) 1 / / GS16CAR (right) 1 / / DOUBLE FACE GD08CA 1 / / GD09CA 1 / / GD10CA 1 / / GD12CA 1 / / GD13CA 1 / / GD16CA 1 / / GS10CAL GS10CAR GD10CA Used when adjustable shelves (in lieu of a base shelf and base bracket) are used as a base and are to be mounted on mobile carriage tracks only. CORNER FILLERS CAT. NO. HEIGHTS DEPTHS WT. PRICE SCFhhddA 42" to 93" 8" to 32" CALL FACTORY Used to make a corner for units placed at right angles to each other. Available in all heights and depths. Specify height and depth (hhdd) when ordering. INTERMEDIATE WALL FILLERS CAT. NO. HEIGHTS DEPTHS WT. PRICE DCFhhddA 42" to 93" 8" to 32" CALL FACTORY Used to fill a void where two single faced units are joined at a right angle with a double faced unit. Available for all base shelf depths and frame heights. Specify height and depth (hhdd) when ordering. 25

26 END PANELS, STEEL BACKS END PANELS 2.5" Weld Frame SINGLE FACE DOUBLE FACE CAT. NO. BASE DEPTH HEIGHT WT. PRICE CAT. NO. BASE DEPTH HEIGHT WT. PRICE WSP4208A WSP4209A WSP4210A WSP4212A WSP4213A WSP4216A WSP6608A WSP6609A WSP6610A WSP6612A WSP6613A WSP6616A WSP7808A WSP7809A WSP7810A WSP7812A WSP7813A WSP7816A WSP8408A WSP8409A WSP8410A WSP8412A WSP8413A WSP8416A WSP9008A WSP9009A WSP9010A WSP9012A WSP9013A WSP9016A WSP9308A WSP9309A WSP9310A WSP9312A WSP9313A WSP9316A Optional attaching brackets available for added stability; see page 22. WDP4216A WDP4218A WDP4220A WDP4224A WDP4226A WDP4232A WDP6616A WDP6618A WDP6620A WDP6624A WDP6626A WDP6632A WDP7816A WDP7818A WDP7820A WDP7824A WDP7826A WDP7832A WDP8416A WDP8418A WDP8420A WDP8424A WDP8426A WDP8432A WDP9016A WDP9018A WDP9020A WDP9024A WDP9026A WDP9032A WDP9316A WDP9318A WDP9320A WDP9324A WDP9326A WDP9332A STEEL BACKS " wide backs are available at a 25% upcharge. Contact factory for weights. WNB3042A WNB3066A WNB3078A WNB3084A WNB3090A WNB3642A WNB3666A WNB3678A WNB3684A WNB3690A

27 PERIODICAL DISPLAY UNITS Designer Series PERIODICAL DISPLAY UNITS DP61120S DP62120S STARTER UNITS ADDER UNITS SLOPING STORAGE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELVES LEVELS W D H SINGLE FACE* DP41120S DP41120A DP61120S , DP61120A DP71120S , DP71120A , DP81120S , DP81120A , DP91120S , DP91120A , DP41120S DP41120A DP61120S 116 1, DP61120A DP71120S 139 1, DP71120A 122 1, DP81120S 160 1, DP81120A 142 1, DP91120S 162 1, DP91120A 143 1, DOUBLE FACE DP42120S , DP42120A , DP62120S , DP62120A , DP72120S , DP72120A , DP82120S , DP82120A , DP92120S , DP92120A , DP42120S 146 1, DP42120A 135 1, DP62120S 193 1, DP62120A 177 1, DP72120S 233 2, DP72120A 215 1, DP82120S 274 2, DP82120A 254 2, DP92120S** 276 2, DP92120A** 255 2, * All single face shelving must be wall anchored. ** Overhead top bracing recommended. NOTE: Canopy tops will not fit on 42" high units. 24" units are also available at a 25% upcharge. Contact factory for weights. For 24" units, add "2' to the end of catalog number (e.g. DP62120S2) 27

28 DESIGNER SERIES UNITS - 36" WIDE SINGLE FACE SINGLE FACE* *All single face shelving must be wall anchored. Sway braces not included on single face units. Designer Series ED41080S ED61080S ED71080S ED81080S STARTER UNITS ADDER UNITS CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. ED81080S2); for 30" units, add "3" (e.g. ED81080S3). BASE DEPTH 42" HIGH, 3 LEVELS ED41080S ED41080A " 8" ED41082S ED41082A " 10" ED41090S ED41090A " 9" ED41091S ED41091A " 10" ED41100S ED41100A " 10" ED41102S ED41102A " 12" ED41120S ED41120A " 12" 66" HIGH, 5 LEVELS ED61080S ED61080A " 8" ED61082S ED61082A " 10" ED61090S ED61090A " 9" ED61091S ED61091A " 10" ED61100S ED61100A " 10" ED61102S ED61102A " 12" ED61120S ED61120A " 12" 78" HIGH, 6 LEVELS ED71080S ED71080A " 8" ED71082S ED71082A " 10" ED71090S ED71090A " 9" ED71091S ED71091A " 10" ED71100S ED71100A " 10" ED71102S ED71102A " 12" ED71120S ED71120A " 12" 84" HIGH, 7 LEVELS ED81080S ED81080A " 8" ED81082S ED81082A " 10" ED81090S ED81090A " 9" ED81091S ED81091A " 10" ED81100S ED81100A " 10" ED81102S ED81102A " 12" ED81120S ED81120A " 12" 90" HIGH, 7 LEVELS ED91080S ED91080A " 8" ED91082S ED91082A " 10" ED91090S ED91090A " 9" ED91091S ED91091A " 10" ED91100S ED91100A " 10" ED91102S ED91102A " 12" ED91120S ED91120A " 12" ED91080S

29 DESIGNER SERIES UNITS - 36" WIDE DOUBLE FACE DOUBLE FACE STARTER UNITS ADDER UNITS CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. ED82080S2); for 30" units, add "3" (e.g. ED82080S3). BASE DEPTH 42" HIGH, 3 LEVELS ED42080S ED42080A " 16" ED42082S ED42082A " 20" ED42090S ED42090A " 18" ED42091S ED42091A " 20" ED42100S ED42100A " 20" ED42102S ED42102A " 24" ED42120S ED42120A " 24" 66" HIGH, 5 LEVELS ED62080S ED62080A " 16" ED62082S ED62082A " 20" ED62090S 122 1, ED62090A " 18" ED62091S 124 1, ED62091A " 20" ED62100S ED62100A " 20" ED62102S ED62102A " 24" ED62120S 142 1, ED62120A " 24" 78" HIGH, 6 LEVELS ED72080S 133 1, ED72080A " 16" ED72082S 137 1, ED72082A " 20" ED72090S 142 1, ED72090A " 18" ED72091S 144 1, ED72091A " 20" ED72100S 152 1, ED72100A " 20" ED72102S 155 1, ED72102A " 24" ED72120S 165 1, ED72120A " 24" 84" HIGH, 7 LEVELS ED82080S 149 1, ED82080A " 16" ED82082S 154 1, ED82082A " 20" ED82090S 160 1, ED82090A 141 1, " 18" ED82091S 162 1, ED82091A 143 1, " 20" ED82100S 172 1, ED82100A " 20" ED82102S 175 1, ED82102A " 24" ED82120S 187 1, ED82120A 167 1, " 24" 90" HIGH, 7 LEVELS ED92080S 152 1, ED92080A " 16" ED92082S 158 1, ED92082A " 20" ED92090S 162 1, ED92090A 142 1, " 18" ED92091S 166 1, ED92091A 145 1, " 20" ED92100S 176 1, ED92100A " 20" ED92102S 178 1, ED92102A 157 1, " 24" ED92120S 190 1, ED92120A 169 1, " 24" ED42080S ED62080S ED72080S ED82080S Designer Series ED92080S 29

30 SINGLE FACE* *All single face shelving must be wall anchored. Sway braces not included on single face units. Designer Series DD41100S DD61100S DD71100S STARTER UNITS ADDER UNITS CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. DD81100S2); for 30" units, add "3" (e.g. DD81100S3). BASE DEPTH 42" HIGH, 3 LEVELS DD41100S DD41100A " 10" DD41102S DD41102A " 12" DD41103S DD41103A " 13" DD41120S DD41120A " 12" DD41130S DD41130A " 13" DD41133S DD41133A " 16" 66" HIGH, 5 LEVELS DD61100S 112 1, DD61100A " 10" DD61102S 114 1, DD61102A " 12" DD61103S 117 1, DD61103A " 13" DD61120S DD61120A " 12" DD61130S 123 1, DD61130A " 13" DD61133S 128 1, DD61133A " 16" 78" HIGH, 6 LEVELS DD71100S 131 1, DD71100A " 10" DD71102S 133 1, DD71102A " 12" DD71103S 135 1, DD71103A " 13" DD71120S 139 1, DD71120A " 12" DD71130S 144 1, DD71130A " 13" DD71133S 149 1, DD71133A " 16" 84" HIGH, 7 LEVELS DD81100S 147 1, DD81100A 129 1, " 10" DD81102S 149 1, DD81102A 131 1, " 12" DD81103S 152 1, DD81103A 134 1, " 13" DD81120S 157 1, DD81120A " 12" DD81130S 162 1, DD81130A " 13" DD81133S 167 1, DD81133A " 16" 90" HIGH, 7 LEVELS DD91100S 149 1, DD91100A 131 1, " 10" DD91102S 151 1, DD91102A 132 1, " 12" DD91103S 154 1, DD91103A 135 1, " 13" DD91120S 159 1, DD91120A " 12" DD91130S 164 1, DD91130A 145 1, " 13" DD91133S 170 1, DD91133A 150 1, " 16" All divider units come with 5 dividers per shelf. Dividers are adjustable on 1" centers. DD91100S

31 DESIGNER SERIES DIVIDER UNITS - 36" WIDE DOUBLE FACE DOUBLE FACE DD42100S STARTER UNITS ADDER UNITS CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH BASE DEPTH 42" HIGH, 3 LEVELS DD42100S 120 1, DD42100A " 20" DD42102S 123 1, DD42102A " 24" DD42103S 128 1, DD42103A " 26" DD42120S 128 1, DD42120A " 24" DD42130S 133 1, DD42130A " 26" DD42133S 142 1, DD42133A " 32" 66" HIGH, 5 LEVELS DD62100S 186 1, DD62100A 170 1, " 20" DD62102S 190 1, DD62102A 173 1, " 24" DD62103S 195 1, DD62103A 178 1, " 26" DD62120S 200 1, DD62120A 184 1, " 24" DD62130S 208 1, DD62130A 191 1, " 26" DD62133S 218 1, DD62133A 200 1, " 32" 78" HIGH, 6 LEVELS DD72100S 218 1, DD72100A 200 1, " 20" DD72102S 221 1, DD72102A 203 1, " 24" DD72103S 226 1, DD72103A 207 1, " 26" DD72120S 234 1, DD72120A 216 1, " 24" DD72130S 243 1, DD72130A 224 1, " 26" DD72133S 251 1, DD72133A 233 1, " 32" 84" HIGH, 7 LEVELS DD82100S 249 2, DD82100A 229 1, " 20" DD82102S 253 2, DD82102A 233 1, " 24" DD82103S 258 2, DD82103A 238 1, " 26" DD82120S 269 1, DD82120A 249 1, " 24" DD82130S 279 1, DD82130A 259 1, " 26" DD82133S 289 2, DD82133A 268 1, " 32" 90" HIGH, 7 LEVELS DD92100S 253 2, DD92100A 232 1, " 20" DD92102S 255 2, DD92102A 234 1, " 24" DD92103S 260 2, DD92103A 239 1, " 26" DD92120S 271 1, DD92120A 250 1, " 24" DD92130S 281 1, DD92130A 260 1, " 26" DD92133S 291 2, DD92133A 269 1, " 32" DD62100S DD72100S DD82100S Designer Series 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. DD82100S2); for 30" units, add "3" (e.g. DD82100S3). All divider units come with 5 dividers per shelf. Dividers are adjustable on 1" centers. DD92100S 31

32 DESIGNER SERIES UPRIGHTS & ACCESSORIES UPRIGHTS Designer Series 42"H Single and Double Entry 78"H Single and Double Entry 90"H Single and Double Entry 66"H Single and Double Entry 84"H Single and Double Entry Uprights are sold individually. For seismic application, contact factory. UPRIGHT EXTENDER SINGLE ENTRY DOUBLE ENTRY CAT. NO. WT. DEPTH PRICE CAT. NO. WT. DEPTH PRICE 42" HIGH EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " " HIGH EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " " HIGH EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " " HIGH EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " " HIGH EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " EDSUPT " EDDUPT " Add to existing frames for more space. Available in a variety of sizes with a 12" minimum. Contact factory for pricing & weights on sizes not shown. SEISMIC SWAY BRACES DUPTEXT18A / DUPTEXT24A / DUPTEXT30A / DUPTEXTxxA /2 Varies Varies Call Factory FLOOR ANCHOR CAT. NO. DESCRIPTION W D H WT. PRICE SSBR6030A For 66" and 78" frames SSBR7330A For 84", 90" and 93" frames SSBR6036A For 66" and 78" frames SSBR7336A For 84", 90" and 93" frames Provides support for uprights. Sway braces come in pairs and include two tumbuckles with hooklegs Used to aid in the leveling of fixed base units. Zinc finish. DFLRANCH /

33 ACCESSORIES: SHELVES, DIVIDERS, BRACKETS, STRUTS ADJUSTABLE SHELVES ED3008A / ED3608A / ED3009A / ED3609A / ED3010A / ED3610A / ED3011A / ED3611A / ED3012A / ED3612A / ED3013A / ED3613A / ED3014A / ED3614A / ED3016A / ED3616A / Includes shelf brackets. Can be furnished in additional widths or depths; contact factory for pricing. ADJUSTABLE DIVIDER SHELVES Designer Series DDS3010A / DDS3610A / DDS3011A / DDS3611A / DDS3012A / DDS3612A / DDS3013A / DDS3613A / DDS3016A / DDS3616A / Slotted on 1" centers to accomodate dividers. Includes 5" back, brackets and 5 dividers per shelf. DIVIDERS CAT. NO. USE WITH D H WT. PRICE DIV07 7"- 9" Shelves DIV09 10" through 13" / DIV12 14" through 16" / SPD12 14" through 16" DIV07 DIV09 DIV12 SPD12 SHELF BRACKETS DSBRK08L* 1 / / DSBRK09L* 1 / / DSBRK10L* 1 / / DSBRK11L* 1 / / DSBRK12L* 1 / / DSBRK13L* 1 / / DSBRK14L* 1 / / DSBRK16L* 1 / / LEFT BRACKET Attaches shelves to unit uprights. *NOTE: Listed catalog numbers are for left bracket only; for right bracket, change the suffix "L" to "R". TOP AND BOTTOM STRUTS RIGHT BRACKET DSTRUT / DSTRUT / DSTRUT / Used to connect two uprights. 33

34 ACCESSORIES: CABINETS, TRAYS & MISC. ACCESSORIES CABINETS Designer Series CABINET ONLY CABINET WITH 2 PULL-OUT FRAMES All welded construction. Ideal for storing valuable items that need to be secured. Includes flipper door and lock with two keys. MEDIA HANGER RACK Consists of brackets with hanger rod for clear-view plastic media bags. WORK SHELF AND BRACKETS CABINET ONLY FDCB36L / / , CABINET WITH 1 PULL-OUT FRAME CBFD36LFA / / , CABINET WITH 2 PULL-OUT FRAMES CBFD36L2FA / / , FRAME ONLY FRAME36A HB30A /2 4 1 / HB36A /2 4 1 / WORK SHELF AND BRACKETS METAL TRAYS Handy metal trays store a wide variety of media. Use alone or in conjunction with Estey cabinets. PRINCETON FILE LEGS LC54A / , LCL (Legs Only, Per Pair) LCBRK24L (Left Bracket Only) LCBRK24R (Right Bracket Only) " deep plastic shelf supported by two steel triangular brackets for work surface with shelving range. Must state desired finish of work shelf. FOR COMPACT DISCS TRCD514A 5 1 / /8 4 1 / CDD-1 (Divider Only) FOR AUDIOCASSETTES TRAC414A 4 7 / /8 3 1 / ACD-1 (Divider Only) FOR VHS TAPES TRVHS714A 7 5 / /8 3 1 / VHSD-1 (Divider Only) FOR MICRO FICHE TRMF614A 6 3 / /8 3 1 / MFD-1 (Divider Only) FOR 3x5 CARDS TRCRD3X5A 5 3 / /8 3 1 / CRDD-1 (Divider Only) KDPRBOXA KDPRBOX1PA (with Plexiglass Front) NEWSPAPER RACK KDPRBOXA KDPRBOX1PA Displays periodicals while allowing for storage of back issues CAT. NO. TYPE W D H WT. PRICE NPR6 6 Holders NPR10 10 Holders , Displays newspapers. Newspaper sticks included.

35 DPDS3012A DPDS3612A DPDS3012ACLH* DPDS3012ACLH* WITH PLEXIGLASS COVER DPDSCA DPDSCA SDS3012A SDS3612A SDS3012ACLH* SDS3012ACLH* WITH PLEXIGLASS COVER SDSCA SDSCA HINGED PERIODICAL DISPLAY SHELVES PERIODICAL DISPLAY SHELF Sloped for display. 14" periodical surface. *Includes continuous label holds. FIXED SLOPED DISPLAY SHELVES SLOPED DISPLAY SHELF Sloped for display. 12" periodical surface. *Includes continuous label holds. PERIODICAL DISPLAY SHELF WITH PLEXIGLASS COVER SLOPED DISPLAY SHELF WITH PLEXIGLASS COVER STORAGE SHELVES Designer Series DIN3610A / DIN3612A / DIN3613A / DIN3614A / DIN3616A / DIN3618A / DIN3619A / Used with sloped display shelves or any place where a flat shelf is desired. For 30" shelf, change "DIN36" to "DIN30" (e.g. DIN3010A). INTEGRAL BACK SHELVES DBLIB3608A / DBLIB3609A / DBLIB3610A / DBLIB3611A / DBLIB3612A / DBLIB3613A / DBLIB3616A / Built-in 2" backstop keeps items organized. Includes brackets and one wire divider per shelf. For 30" shelf, change "DBLIB36" to "DBLIB30" (e.g. DBLIB3016A). METAL BROWSING BOX HDBRB3611A / / HDBRB3614A / / BRBWD (Divider Only) Ideal for storing all media items. Includes 2 wire dividers. PULL-OUT BROWSING BOX XHDBRB3611A / XHDBRB3614A / / " and 30" sizes also available; call factory for pricing and weights. Ideal for sotring all media items in a high capacity environment. Multiple boxes can be placed on top of one another while retaining accessibility to stored items. 35

36 ACCESSORIES: SPECIALTY SHELVES SLIDING REFERENCE SHELVES Designer Series Sturdy full extension slides attach to underside of adjustable shelf. Use two reference shelves for double face units. ZIG-ZAG SHELF DOUBLE TIER BROWSING BOX DSRS3008A DSRS3009A DSRS3010A DSRS3012A DSRS3608A DSRS3609A DSRS3610A DSRS3612A DZZ3008A / DZZ3608A / INSERT ONLY ZZPD Adjustable shelf with paperback insert. Ideal for displaying audio cassette or paperback books. VIDEO CASSETTE/PAPERBACK BOOK SHELF WITH NO DIVIDER SLOTS WITH SLOTS AND FIVE DIVIDERS Slopes to allow convenient viewing of spines on papaerbacks and video cassettes. 30"w size also available; call factory for pricing. MICROFILM/AUDIO CASSETTE SHELF DTBRB36A WIRE DIVIDER DTWD Two levels of storage for all media items. Holds 168 cassette tapes, 56 VHS videotapes or 156 compact discs WITH NO SLOTS FOR DIVIDERS DVCS3609A / DVCS3610A / DVCS3612A / WITH SLOTS AND FIVE DIVIDERS DDVCS3609A / DDVCS3610A / DDVCS3612A / DIVIDER ONLY DIV07 (for 9" deep shelves only) DIV09 (for 10" & 12" deep shelves only) DOUBLE TIER VIDEO CASSETTE SHELF DSPMF30A / DSPMF36A / For storing microfilm or audio cassettes. Capacity: 100 cassettes (36"w shelf) VCDT VCDT Use with compact discs, video casssettes or paperbacks. Sloped; 36" wide shelf holds 60 VHS videotapes or 160 compact discs.

37 ACCESSORIES: BOOK SUPPORTS, FILLERS, BACKSTOPS BOOK SUPPORTS WITH CORK BACKING BSN6 4 9 / / BSN9 4 9 / / WITH MAGNETIC STRIP BSM6 4 9 / / BSM9 4 9 / / Unattached book support used on surface of shelves. Furnished with cork backing or a magnetic strip, as specified above. LOBS6 4 9 / / LOBS9 4 9 / / Hooks onto return flange of adjustable shelves for rigid support. CAT. NO. TYPE W D H WT. PRICE WBS6 "V" 3 / WBS9 "V" 3 / WBSW7 "W" 3 / WBSW9 "W" 3 / Heavy spring wire book support. Attaches to underside of shelf. Easily adjustable. NOTE: Dividers are shown attached to shelves for clarification purposes only; shelves must be ordered seperately SHELF FILLER Designer Series SHFIL SHFIL Fills the space between adjustable shelves on double sided units, providing a continuous surface. Attaches with two clips that fasten to underside of shelves. REVERSIBLE BACKSTOP --- WIRE DIVIDER BACK STOP RBS / RBS / WIRE DIVIDER BSWBS / One side is a regular backstop. The other side is a sliding support backstop (when used with wire divider sold above). CBS /8 3 9 / CBS /8 3 9 / Works as a backstop for each side of a double entry unit, eliminating the need for an individual backstop for each side. OFFSET CENTER BACKSTOP --- LARGE PROFILE OFFSET CENTER BACKSTOP --- SMALL PROFILE CBSS / CBSS / Works as a backstop for each side of a double entry unit, eliminating the need for an individual backstop for each side. KICK PLATE DKP24A / DKP30A / DKP36A / Prevents items from rolling beneath shelves. 37

38 ACCESSORIES: WALL HUNG COLUMNS, MISC. ACCESSORIES WALL HUNG COLUMNS Designer Series Slotted strip attaches to wall. Designed to accept all components or accessory items. Special heights available. Hardware not included because of various wall construction. CARD HOLDERS SCH-B DCH-B SCH-CA For 3" x 5" cards. Used on end panels. Attaches with double-sided tape. Steel holders are finished in black powder coat paint. TRANSVERSE OVERHEAD TOP TIE BRACING DPILWCH / DPILWCH / DPILWCH / DPILWCH / DPILWCH / DPILWCH / DPILWCH / DPILWCH / DPILWCH / DPILWCH / SINGLE CARD HOLDER SCH-B 5 1 / / DOUBLE CARD HOLDER DCH-B 10 1 / / ALUMINUM HOLDER SCH-CA 5 5 / / SHELF LABEL HOLDER Plastic clip-on holder 5 /8" x 5" card. (Paper not included) OTBW / Channel construction top tie furnished in 8 foot lengths. Recommended for added stabilization when bases and shelves are of equal depths. SLH 5 1 / / WALL CLIP Used to attach single face units to the wall for support. Wall hardware not included. WCLIP RANGE FINDER For use on end panels or uprights for identification of range contents. Attaches with double-sided tape. Holds two 3" x 5" cards. Finished in black. RFP /4 3 1 / WALL FILLERS SCFhhddA DCFhhddA Specify height and depth (hhdd) when ordering. CAT. NO. HEIGHTS DEPTHS WT. PRICE CORNER FILLER* SCFhhddA 42" to 93" 8" to 32" CALL FACTORY INTERMEDIATE WALL FILLER** DCFhhddA 42" to 93" 8" to 32" CALL FACTORY *Used to make a corner for units placed at right angles to each other. Available in all heights and depths. **Used to fill a void where two single faced units are joined at a right angle with a double faced unit. Available for all base shelf depths and frame heights.

39 ACCESSORIES: CANOPY TOPS, BRACKETS, SIGNAGE, GUSSETS SINGLE FACE STEEL CANOPY TOPS SINGLE FACE DCTS DCTS DCTS DCTS DCTS DCTS DCTS DCTS DCTS DCTS DCTS DCTS DOUBLE FACE STEEL CANOPY TOPS Designer Series DOUBLE FACE DCTD DCTD DCTD DCTD DCTD DCTD DCTD DCTD DCTD DCTD DCTD DCTD Keeps dust off your valuable materials. Includes attaching brackets. WOOD TOP CANOPY BRACKETS CANOPY BRACKETS FOR WOOD/PLASTIC TOP DCTIB08S(1 Pair) DCTIB12S(1 Pair) For single face units, use one pair. For double face units, use two pair. *Attaching bracket is also used to secure steel end panels (see page 16). Each pair consists of one left and one right bracket. CANOPY SIGNAGE CPSGN / / Easily identify special items or sections with this customizable label holder. Three attachment clips provided. 39

40 END PANELS, STEEL BACKS END PANELS Designer Series SINGLE FACE DOUBLE FACE CAT. NO. BASE DEPTH HEIGHT WT. PRICE CAT. NO. BASE DEPTH HEIGHT WT. PRICE DSP4208LA DSP4209LA DSP4210LA DSP4212LA DSP4213LA DSP4216LA DSP6608LA DSP6609LA DSP6610LA DSP6612LA DSP6613LA DSP6616LA DSP7808LA DSP7809LA DSP7810LA DSP7812LA DSP7813LA DSP7816LA DSP8408LA DSP8409LA DSP8410LA DSP8412LA DSP8413LA DSP8416LA DSP9008LA DSP9009LA DSP9010LA DSP9012LA DSP9013LA DSP9016LA *NOTE: Listed catalog numbers are for left panels only; for right panel, change the suffix "LA" to "RA". Additional sizes available; call factory for pricing and weights. DDP4216A DDP4218A DDP4220A DDP4224A DDP4226A DDP4232A DDP6616A DDP6618A DDP6620A DDP6624A DDP6626A DDP6632A DDP7816A DDP7818A DDP7820A DDP7824A DDP7826A DDP7832A DDP8416A DDP8418A DDP8420A DDP8424A DDP8426A DDP8432A DDP9016A DDP9018A DDP9020A DDP9024A DDP9026A DDP9032A Additional sizes available; call factory for pricing and weights. STEEL BACKS DNB3042A DNB3066A DNB3078A DNB3084A DNB3090A DNB3642A DNB3666A DNB3678A DNB3684A DNB3690A " wide backs are also available. Please contact factory for pricing and weights.

41 THE WELD FRAME SYSTEM THE 2" WELD FRAME SYSTEM Estey Weld Frame construction eliminates the need for sway bracing and separate starter/adder units. 2" Weld Frame All Units Feature: Basic Shelving Components: Upright slot spacing 1" on centers in a 6" Welded frames repeat pattern for easy shelf alignment. Base brackets Upright posts have 8 right angle bends for Base shelf added strength. Adjustable shelves and brackets Six-point leveling system per double-face section; Kickplate(s) (black powder coat finish) four-point leveling system per single face section (adjustable levelers provided on both base units). Base shelves available in one-piece pan, or in multiple-piece construction with kickplate(see below). Electrostatically applied/baked-on powder epoxy/ polyester powder coated finish. FIXED BASE SHELF ADJUSTABLE (KICKPLATE) BASE SHELF NOTE: All shelf depths in this catalog are expressed in nominal sizes. Base shelf dimensions will actually be greater than those shown; all other shelf sizes will be 1" less. Contact factory for specific dimensions. 41

42 SHELVING UNITS - 36" WIDE FIXED & ADJUSTABLE BASE SINGLE FACE* *All single face shelving must be wall anchored. 2" Weld Frame W2F41080 W2F61080 W2F71080 W2F81080 FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. W2F810802); for 30" units, add "3" (e.g. W2F810803). BASE DEPTH 42" HIGH, 3 LEVELS W2F W2A " 8" W2F W2A " 10" W2F W2A " 9" W2F W2A " 10" W2F W2A " 10" W2F W2A " 12" W2F W2A " 12" 66" HIGH, 5 LEVELS W2F W2A " 8" W2F W2A " 10" W2F W2A " 9" W2F W2A " 10" W2F W2A " 10" W2F W2A " 12" W2F W2A " 12" 78" HIGH, 6 LEVELS W2F W2A " 8" W2F W2A " 10" W2F W2A " 9" W2F W2A " 10" W2F W2A " 10" W2F W2A " 12" W2F W2A " 12" 84" HIGH, 7 LEVELS W2F W2A " 8" W2F W2A " 10" W2F W2A " 9" W2F W2A " 10" W2F W2A " 10" W2F W2A " 12" W2F W2A " 12" 90" HIGH, 7 LEVELS W2F W2A " 8" W2F W2A " 10" W2F W2A " 9" W2F W2A " 10" W2F W2A " 10" W2F W2A " 12" W2F W2A " 12" W2F91080

43 SHELVING UNITS - 36" WIDE FIXED & ADJUSTABLE BASE DOUBLE FACE FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. W2F820802); for 30" units, add "3" (e.g. W2F820803). BASE DEPTH 42" HIGH, 3 LEVELS W2F W2A " 16" W2F W2A " 20" W2F W2A " 18" W2F W2A " 20" W2F W2A " 20" W2F W2A " 24" W2F W2A " 24" 66" HIGH, 5 LEVELS W2F W2A " 16" W2F W2A " 20" W2F W2A " 18" W2F W2A " 20" W2F W2A " 20" W2F W2A " 24" W2F W2A " 24" 78" HIGH, 6 LEVELS W2F W2A " 16" W2F W2A " 20" W2F W2A " 18" W2F W2A " 20" W2F W2A " 20" W2F W2A " 24" W2F W2A " 24" 84" HIGH, 7 LEVELS W2F W2A " 16" W2F W2A " 20" W2F W2A " 18" W2F W2A " 20" W2F W2A " 20" W2F W2A " 24" W2F W2A " 24" 90" HIGH, 7 LEVELS W2F W2A " 16" W2F W2A " 20" W2F W2A " 18" W2F W2A " 20" W2F W2A " 20" W2F W2A " 24" W2F W2A " 24" W2F42080 W2F62080 W2F72080 W2F " Weld Frame W2F

44 INTEGRAL BACK DIVIDER UNITS - 36" WIDE FIXED & ADJUSTABLE BASE SINGLE FACE* *All single face shelving must be wall anchored. 2" Weld Frame W2BDF41080 W2BDF61080 W2BDF71080 W2BDF81080 FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. W2BDF811002); for 30" units, add "3" (e.g. W2BDF811003). BASE DEPTH 42" HIGH, 3 LEVELS W2BDF W2BDA " 10" W2BDF W2BDA " 12" W2BDF W2BDA " 12" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 16" 66" HIGH, 5 LEVELS W2BDF W2BDA " 10" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 16" 78" HIGH, 6 LEVELS W2BDF W2BDA " 10" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 16" 84" HIGH, 7 LEVELS W2BDF W2BDA " 10" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 16" 90" HIGH, 7 LEVELS W2BDF W2BDA " 10" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 16" 93" HIGH, 8 LEVELS W2BDF W2BDA " 10" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA " 12" W2BDF W2BDA " 13" W2BDF W2BDA , " 16" W2BDF91080 All units come with 5 dividers per shelf. Dividers are adjustable on 1" centers W2BDF01080

45 INTEGRAL BACK DIVIDER UNITS - 36" WIDE FIXED & ADJUSTABLE BASE DOUBLE FACE W2BDF42080 FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH BASE DEPTH 42" HIGH, 3 LEVELS W2BDF W2BDA " 20" W2BDF W2BDA " 24" W2BDF W2BDA " 26" W2BDF W2BDA " 24" W2BDF W2BDA " 26" W2BDF W2BDA " 32" 66" HIGH, 5 LEVELS W2BDF W2BDA " 20" W2BDF W2BDA " 24" W2BDF W2BDA " 26" W2BDF W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 32" 78" HIGH, 6 LEVELS W2BDF , W2BDA , " 20" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 32" 84" HIGH, 7 LEVELS W2BDF , W2BDA , " 20" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 32" 90" HIGH, 7 LEVELS W2BDF , W2BDA , " 20" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 32" 93" HIGH, 8 LEVELS W2BDF , W2BDA , " 20" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 24" W2BDF , W2BDA , " 26" W2BDF , W2BDA , " 32" 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. W2BDF821002); for 30" units, add "3" (e.g. W2BDF821003). W2BDF62080 W2BDF72080 W2BDF82080 W2BDF " Weld Frame All units come with 5 dividers per shelf. Dividers are adjustable on 1" centers. W2BDF

46 INTEGRAL BACK UNITS - 36" WIDE FIXED & ADJUSTABLE BASE SINGLE FACE* *All single face shelving must be wall anchored. 2" Weld Frame W2FIB41080 W2FIB61080 W2FIB71080 W2FIB81080 FIXED BASE CAT. NO. WT. PRICE FIXED BASE CAT. NO. WT. PRICE ADJUSTABLE BASE CAT. NO. WT. PRICE SHELF DEPTH Units come with one wire divider per shelf level. 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. W2FIB810802); for 30" units, add "3" (e.g. W2FIB810803). BASE DEPTH 42" HIGH, 3 LEVELS W2FIB W2AIB " 8" W2FIB W2AIB " 10" W2FIB W2AIB " 9" W2FIB W2AIB " 10" W2FIB W2AIB " 10" W2FIB W2AIB " 12" W2FIB W2AIB " 12" 66" HIGH, 5 LEVELS W2FIB W2AIB " 8" W2FIB W2AIB " 10" W2FIB W2AIB " 9" W2FIB W2AIB " 10" W2FIB W2AIB " 10" W2FIB W2AIB " 12" W2FIB W2AIB " 12" 78" HIGH, 6 LEVELS W2FIB W2AIB " 8" W2FIB W2AIB " 10" W2FIB W2AIB " 9" W2FIB W2AIB " 10" W2FIB W2AIB " 10" W2FIB W2AIB " 12" W2FIB W2AIB " 12" 84" HIGH, 7 LEVELS W2FIB W2AIB " 8" W2FIB W2AIB " 10" W2FIB W2AIB " 9" W2FIB W2AIB " 10" W2FIB W2AIB " 10" W2FIB W2AIB " 12" W2FIB W2AIB " 12" 90" HIGH, 7 LEVELS W2FIB W2AIB " 8" W2FIB W2AIB " 10" W2FIB W2AIB " 9" W2FIB W2AIB " 10" W2FIB W2AIB " 10" W2FIB W2AIB " 12" W2FIB W2AIB " 12" EXTRA DIVIDERS EWD-1 3 / / EWD-2 3 / / W2FIB91080

47 INTEGRAL BACK UNITS - 36" WIDE FIXED & ADJUSTABLE BASE DOUBLE FACE FIXED BASE ADJUSTABLE BASE CAT. NO. WT. PRICE CAT. NO. WT. PRICE SHELF DEPTH BASE DEPTH 42" HIGH, 3 LEVELS W2FIB W2AIB " 16" W2FIB W2AIB " 20" W2FIB W2AIB " 18" W2FIB W2AIB " 20" W2FIB W2AIB " 20" W2FIB W2AIB " 24" W2FIB W2AIB " 24" 66" HIGH, 5 LEVELS W2FIB W2AIB " 16" W2FIB W2AIB " 20" W2FIB W2AIB " 18" W2FIB W2AIB " 20" W2FIB W2AIB " 20" W2FIB W2AIB " 24" W2FIB W2AIB " 24" 78" HIGH, 6 LEVELS W2FIB W2AIB " 16" W2FIB W2AIB " 20" W2FIB W2AIB " 18" W2FIB W2AIB " 20" W2FIB W2AIB " 20" W2FIB W2AIB " 24" W2FIB W2AIB , " 24" 84" HIGH, 7 LEVELS W2FIB W2AIB " 16" W2FIB W2AIB " 20" W2FIB W2AIB " 18" W2FIB W2AIB " 20" W2FIB , W2AIB , " 20" W2FIB , W2AIB , " 24" W2FIB , W2AIB , " 24" 90" HIGH, 7 LEVELS W2FIB W2AIB " 16" W2FIB W2AIB " 20" W2FIB W2AIB " 18" W2FIB W2AIB " 20" W2FIB , W2AIB , " 20" W2FIB , W2AIB , " 24" W2FIB , W2AIB , " 24" Units come with one wire divider per shelf level. 30" wide units are available at the price listed. 24" wide units are available at a 25% upcharge. Contact factory for weights. For 24" units, add "2" to end of catalog number (e.g. W2FIB ); for 30" units, add "3" (e.g. W2FIB820803). W2FIB42080 W2FIB62080 W2FIB72080 W2FIB " Weld Frame EXTRA DIVIDERS EWD-1 3 / / EWD-2 3 / / W2FIB

48 PERIODICAL DISPLAY UNITS PERIODICAL DISPLAY UNITS 2" Weld Frame BASE DEPTH W2P61120 W2P Pivoting periodical shelving with flat storage shelf. With 12" storage shelves & 12" fixed base single face or 24" fixed base double face. Adjustable base units available. 24" wide units are also available at a 25% upcharge. Contact factory for weights. CAT. NO. SLOPING SHELVES STORAGE LEVELS W D H WT. PRICE SINGLE FACE* W2P W2P W2P W2P W2P W2P W2P W2P W2P W2P DOUBLE FACE W2P W2P W2P , W2P , W2P921203** , W2P W2P W2P , W2P , W2P92120** , A canopy top will not fit on 42" high units. *All single face shelving must be wall anchored. **Overhead top bracing recommended.

49 FRAMES & FRAME ACCESSORIES WELDED FRAMES CAT. NO. DESCRIPTION W D H WT. PRICE W W W W W W W W W W W W W W W W SEISMIC SWAY BRACES SSBR6030A For 66" and 78" frames SSBR7330A For 84", 90" and 93" frames SSBR6036A For 66" and 78" frames SSBR7336A For 84", 90" and 93" frames Special widths or heights are available. Contact factory for pricing. WELDED FRAMES 2" Weld Frame SEISMIC SWAY BRACES SEISMIC WELDED FRAMES SW SW SW SW SW SW Eliminates the need for sway braces. WELDED FRAME EXTENDER WFEXT WFEXT WFEXT WFEXT2-36xx 36 2 Varies Varies Contact Factory Add to existing frames for more space. Available in a variety of sizes with a 12" minimum. Contact factory for pricing and weights on sizes not shown. 49

50 CLOSED BASE SHELVES WITH AND WITHOUT DIVIDERS CLOSED BASE SHELVES - SINGLE FACE 2" Weld Frame Comes complete with base brackets. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. WA2-3013A or WB2-3013A). Call factory for weights on 30" shelves. CLOSED BASE SHELVES - DOUBLE FACE Comes complete with base brackets. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. WA2-3013A or WB2-3013A). Call factory for weights on 30" shelves. FOR FIXED BASE SHELVES WB2-3608A / WB2-3609A / WB2-3610A / WB2-3612A / WB2-3613A / WB2-3616A / FOR ADJUSTABLE BASE SHELVES WA2-3608A / WA2-3609A / WA2-3610A / WA2-3612A / WA2-3613A / WA2-3616A / FOR FIXED BASE SHELVES WB2-3616DA / WB2-3618A / WB2-3620A / WB2-3624A / WB2-3626A / WB2-3632A / FOR ADJUSTABLE BASE SHELVES WA2-3616DA / WA2-3618A / WA2-3620A / WA2-3624A / WA2-3626A / WA2-3632A / CLOSED BASE SHELVES WITH INTEGRAL BACK AND DIVIDERS - SINGLE FACE Slotted on 1" centers for dividers, with 5" backstop. Five adjustable dividers provided per shelf. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. TBDF or TBDA2-3010). Call factory for weights on 30" shelves. FOR FIXED BASE SHELVES TBDF / TBDF / TBDF / TBDF / FOR ADJUSTABLE BASE SHELVES TBDA / TBDA / TBDA / TBDA / CLOSED BASE SHELVES WITH INTEGRAL BACK AND DIVIDERS - DOUBLE FACE Slotted on 1" centers for dividers, with 5" backstop. Five adjustable dividers provided per shelf. Kickplates for adjustable base shelves are furnished with black powder coat finish. If 30" shelves are desired, change the number "36" to "30" (e.g. TBDF or TBDA2-3010). Call factory for weights on 30" shelves. FOR FIXED BASE SHELVES TBDF / TBDF / TBDF / TBDF / FOR ADJUSTABLE BASE SHELVES TBDA / TBDA / TBDA / TBDA /

51 INTEGRAL BACK BASE SHELVES, SLOPING BASE SHELVES INTEGRAL BACK BASE SHELVES - SINGLE FACE WIBBS2-3008A / WIBBS2-3009A / WIBBS2-3010A / WIBBS2-3012A / WIBBS2-3013A / WIBBS2-3016A / WIBBS2-3608A / WIBBS2-3609A / WIBBS2-3610A / WIBBS2-3612A / WIBBS2-3613A / WIBBS2-3616A / DIVIDER ONLY EWD-1 3 / / EWD-2 3 / / WIBBS2-3018A / WIBBS2-3020A / WIBBS2-3024A / WIBBS2-3026A / WIBBS2-3032A / WIBBS2-3618A / WIBBS2-3620A / WIBBS2-3624A / WIBBS2-3626A / WIBBS2-3632A / DIVIDER ONLY EWD-1 3 / / EWD-2 3 / / Includes one wire divider per opening and a 2" built-in backstop. If adjustable base is required, change "WIBBS" to "WIBBSA" when ordering (e.g. WIBBSA2-wwddA). Call factory for adjustable base pricing and weights. INTEGRAL BACK BASE SHELVES - DOUBLE FACE Includes one wire divider per opening and a 2" built-in backstop. If adjustable base is required, change "WIBBS" to "WIBBSA" when ordering (e.g. WIBBSA2-wwddA). Call factory for adjustable base pricing and weights. 2" Weld Frame SLOPING BASE SHELVES - SINGLE FACE WSB2-3009A / WSB2-3010A / WSB2-3012A / WSB2-3609A / WSB2-3610A / WSB2-3612A / VIDEO SLOPING BASE SHELVES (6 DIVIDERS INCLUDED) VC2-3012A / VC2-3612A / WSB2-3612A VC2-3612A Sloping Base Shelves and Video Sloping Base Shelves are sloped at 9 o, aiding visually those items displayed on the bottom shelf. Video Sloping Base Shelves are slotted on 1" centers for dividers, with 5" integral backstop; six adjustable dividers are provided. SLOPING BASE SHELVES - DOUBLE FACE WSB2-3018A / WSB2-3020A / WSB2-3024A / WSB2-3618A / WSB2-3620A / WSB2-3624A / VIDEO SLOPING BASE SHELVES (12 DIVIDERS INCLUDED) VC2-3012DA / VC2-3612DA / WSB2-3624A VC2-3612DA Sloping Base Shelves and Video Sloping Base Shelves are sloped at 9 o, aiding visually those items displayed on the bottom shelf. Video Sloping Base Shelves are slotted on 1" centers for dividers, with 5" integral backstop; twelve adjustable dividers are provided. 51

52 SHELVES, BRACKETS, DIVIDERS, SHIMS ADJUSTABLE SHELVES 2" Weld Frame Includes shelf brackets. Can be furnished in additional widths or depths; contact factory for pricing. ADJUSTABLE DIVIDER SHELVES BL3008A / BL3009A / BL3010A / BL3011A / BL3012A / BL3013A / BL3014A / BL3016A / BL3608A / BL3609A / BL3610A / BL3611A / BL3612A / BL3613A / BL3614A / BL3616A / Slotted on 1" centers to accommodate dividers. Includes 5" back, brackets and 5 adjustable dividers per shelf. SHELF BRACKETS BDA3010A / BDA3011A / BDA3012A / BDA3013A / BDA3016A / BDA3610A / BDA3611A / BDA3612A / BDA3613A / BDA3616A / LEFT BRACKET Attaches shelves to unit uprights. *NOTE: Listed catalog numbers are for left bracket only; for right bracket, change the suffix "L" to "R". DIVIDERS RIGHT BRACKET ASBRK08L* 1 / / ASBRK09L* 1 / / ASBRK10L* 1 / / ASBRK11L* 1 / / ASBRK12L* 1 / / ASBRK13L* 1 / / ASBRK14L* 1 / / ASBRK16L* 1 / / DIV07 DIV09 DIV12 SPD12 SHIMS Used to aid in the leveling of fixed base units. Zinc finish. CAT. NO. USE WITH D H WT. PRICE DIV07 7"-9" Shelves DIV09 10" through 13" / DIV12 14" through 16" / SPD12 14" through 16" SHIM /2 1 /

53 THIS PAGE LEFT BLANK INTENTIONALLY THIS PAGE LEFT BLANK INTENTIONALLY 2" Weld Frame THIS PAGE LEFT BLANK INTENTIONALLY THIS PAGE LEFT BLANK INTENTIONALLY 53