Fumex. Upblast Roof Exhauster Technical Specifications BULLETIN FX17

Transcription

1 Upblast Roof Exhauster Technical Specifications BULLETIN FX17

2 TABLE OF CONTENTS Introduction 3 Direct Drive Dimensional & Performance Data 4 Enhanced Direct Drive Dimensional & Performance Data 8 Belt Drive Dimensional & Performance Data 13

3 INTRODUCTION Fumex Series of Centrifugal Fans Fumex centrifugal fans are designed for medium to high pressure applications and are available in a range of capacities. They can be either roof or wall mounted. While suitable for general ventilation, Fumex fans are specifically designed to discharge contaminated or grease-laden air or fumes up and away from building surfaces. The optional Fatrap (UL762) restaurant grease exhaust configuration makes Fumex fans particularly suited for all food service applications and chemical fume hoods. The optional heat and smoke removal configuration makes Fumex fans particularly suited for heat and smoke control systems. The optional high wind construction makes Fumex fans particularly suited for high wind hurricane zones. Belt Drive Fumex with Fatrap option (left) and Direct Drive Fumex (below). Fumex fans feature a weather-resistant seamless spun aluminum housing which provides ample drainage and works in conjunction with a patented wheel design and deeply spun inlets to provide smooth quiet airflow through the ventilator. The centrifugal wheels are aluminum, non-overloading, backward inclined, robotically welded, and dynamically balanced. Direct Drive Units Model: FX (V/S/R/Q/Q1/Q2) Static pressure up to 1.5 wg. Flow capacity up to 4,489 CFM. Fatrap (FT) option available on sizes 13, 16, and 18. Enhanced Direct Drive Units Model: FX (L/M/W/V/S/R/Q1/Q2) Static pressure up to 1.5 wg. Flow capacity up to 5,452 CFM. Standard Duty Belt Drive Units Model: FX (B) Static pressure up to 2.5 wg. Flow capacity up to 21,511 CFM. Fatrap (FT) option available. Heat & Smoke Removal (-HS) option available. High Pressure Belt Drive Units Model: FX (BH) Static pressure up to 4 wg. Flow capacity up to 9,920 CFM. Fatrap (FT) option available. Heat & Smoke Removal (-HS) option available. CERTIFICATIONS & LISTINGS AMCA Certification PennBarry certifies that the Fumex direct drive and belt drive models FX, FXBH, and FXBHFT shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. FX27B is not AMCA Certified. UL and cul Certification Fumex fans carry the UL label, UL705 (ZACT/ ZACT7), file #E Fumex fans with the Fatrap option carry the UL label, UL762 (YZHW/ YZHW7), file #MH Fumex fans with the heat and smoke removal option carry the UL label, UL793 (ZAXH/ZAXH7), file #MH19473 The Fumex models are designed to withstand 150 MPH winds in accordance with Miami-Dade and Florida Building Code standards. Miami-Dade NOA # Florida Product Approval # Moving Your Way 3

4 DIRECT DRIVE PERFORMANCE DATA Fan Curves The fan curves illustrated here show the range of capacities available for direct drive units. Each graph shows the performance of several models at one particular nominal speed. Fan curves provide a quick method for selecting a fan unit based on design point requirements. The direct drive performance charts on the previous pages provides the tabular data (CFM and static pressure) used to plot the fan curves. In addition, the horsepower tip speed and sones are tabulated. Since sound is normally an important factor in the selection of a fan, an engineer will usually want to select the slowest unit which meets CFM and SP requirements. Please refer to the Motor Availability section to make sure the motor you select meets your electrical requirements. Nominal 1050 Nominal FX18R Nominal FX13V FX16V FX08R FX10R FX11R FX13R FX16R FX11V Nominal Nominal FX08S FX10S FX11S FX13S FX16S Fumex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances in the air stream FX11Q FX13Q FX16Q1 (Nominal 1650 FX16Q2 4 Moving Your Way

5 BELT DRIVE PERFORMANCE DATA Performance Data The belt drive models shown on the following pages have sizes and capacities ranging from below 250 CFM to above 30,000 CFM, with static pressures from 0 to 4. All models are available with a wide range of horsepower sizes and s. Two-speed motors are commonly used to enhance this flexibility. The data provided for each belt drive model includes: Elevation Drawing Showing Overall Dimensions Fan Curve Graph Performance Chart Each curve graphically displays the range of capacities available for each model, in most cases beyond the specifics shown in the tabular data. The maximum performance afforded by each horsepower is indicated by dashed lines and the is indicated by solid lines. Some models have graphs that show both shaded and unshaded areas. Selection should be made from the unshaded area only. Shaded areas reflect unstable performance ( surge ), a characteristic typical of backward inclined wheels, and should be avoided. These unstable regions are not shown in the tabular data. The highest shown for a specific horsepower in the tabular data is the maximum speed that for any point along the performance curve, the B will not exceed the available horsepower. It is important to note that while it is common industry-wide practice to exceed a nominal horsepower by using a motor s service factor, PennBarry uses a conservative portion of the service factor, allowing half to remain a true safety factor. Belt Drive Losses The AMCA Review Committee has developed the chart shown below for the purpose of estimating belt drive losses. To calculate total B (including drive losses): Find the B of your operating point on the x-axis on the graph below. Follow the vertical line to the curves indicating the range of drive losses. Look at the y-axis on the left and find the drive loss percentage. Calculate the total B by adding the drive loss to the operating point B. For B s below 0.3, use 30%. Drive Loss Reference Chart DRIVE LOSS (% MOTOR POWER OUTPUT) MOTOR POWER OUTPUT (B) Range drive loss for standard belts. Higher fan speeds tend to have higher drive losses than lower fan speeds at the same horsepower. Use the Motor Availability chart (see Motor Selection) to select motor enclosures and voltages which can be installed in the fans. Note: Fumex fans are only one component of a total system. As such, performance is directly affected by the system. It is critical that system designers determine actual system losses to ensure that the actual flow is specified in the system range For totally enclosed, explosion proof, multi-speed and all 1.0 Service Factor motors, fan B plus drive losses should not exceed motor rated. Graph reprinted from AMCA publication 203, with the express written permission from the Air Movement and Control Association, Inc., 30 West University Drive, Arlington Heights, IL Moving Your Way 5

6 FX08 - FX13 DIRECT DRIVE Performance Data Overview Fumex direct drive models are available with single and multi-speed motors. Multi-speed motors (eg., FX16V/S/R) are designated: V (1050 ), S (1300 ), and R (1550 ). FX18V is an exception, being a single speed motor. Q, Q2 (1725 ) and Q1 (1650 ) are single speed motors. A single Fumex fan may be suitable for several requirements by a simple wiring change. This feature provides flexibility for a variety of reasons, including energy savings, off hours requirements, future expansion, or unexpected field variations. Fumex direct drive models are available in six sizes (8, 10, 11, 13, 16, and 18). Capacities up to 4500 CFM, with static pressures to 1 1/2. By using Lek-Trol variable speed controllers, the high speed flow rate of most models can be reduced by as much as 50%. Do not use Lek-Trol on medium or low speed for multi-speed models. When compared to belt drive models, direct drive fans require less maintenance, have a simpler construction, cost less, and are lighter in weight. Performances in 50 Hz applications will be less than shown below; consult your local PennBarry representative. FX08 - FX11 25" 16 ⅞" 1 ¼" 16 ⅞" 1 ¼" (FX Units Only) Galv. Steel Base = 16 Gage 14 ⅛" 25" 9" x 9" WFX08 Only 24" 25" 11 ½" x 11 ½" WFX10 WFX11 Only 24" (WFX Units Only) Aluminum Base = (FX Units Only) Aluminum Base = Discharge Apron = FX08 Estimated Ship Weight = 29 lbs. FX10 Estimated Ship Weight = 32 lbs. FX11V/S/R Estimated Ship Weight = 42 lbs. 18 ½" x 18 ½" FX11Q Estimated Ship Weight = 44 lbs. Model Nominal Max Watts SP SP SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX8V 1/00(3) -(3) FX8S 1/ FX8R 1/ FX8Q 1/20(3) -(3) FX10V 1/50(3) -(3) FX10S 1/ FX10R 1/ FX10Q 1/6(3) -(3) FX11V 1/ FX11S 1/ FX11R 1/ FX11Q 1/ (1) TE motor is 1/6 Hp. (2) TE motor is 1/7 Hp. (3) Available on EC Motor only. See additional notes on page 11. FX13 25 ½" 17 ⅞" 1 ¼" 16 ½" 25 ½" 11 ½" x 11 ½" 24" (FX Units Only) Galv. Steel Base = 16 Gage (WFX Units Only) Aluminum Base = (FX Units Only) Aluminum Base = Discharge Apron = FX13S/R Estimated Ship Weight = 45 lbs. 18 ½" x 18 ½" FX13Q Estimated Ship Weight = 52 lbs. Model Nominal Max SP SP SP SP SP SP SP SP SP Watts CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX13V 1/ FX13S 1/ FX13R 1/ FX13Q 1/ See notes on page Moving Your Way

7 FX16 - FX18 DIRECT DRIVE FX16 30 ¾" 24 ¼" 1 ¼" (FX Units Only) Galv. Steel Base = 16 Gage 24" Aluminum Base = ⅜" 30 ¾" 16" x 16" Discharge Apron = FX16Q Estimated Ship Weight = 71 lbs. 20 ½" x 20 ½" Model Nominal SP SP SP SP SP SP SP SP SP SP Max Watts CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX16V 1/ FX16S 1/ FX16R 1/3 (1) FX16Q1 1/ FX16Q2 3/ (1) TE motor is 1/2 Hp. See additional notes at bottom of page. FX18 39" 32 ½" 1 ¼" (FX Units Only) Galv. Steel Base = 16 Gage 29 ½" Aluminum Base = " 39" 20" x 20" Discharge Apron = FX18V Estimated Ship Weight = 87 lbs. 28 ½" x 28 ½" Model Nominal SP SP SP SP SP SP SP SP SP SP Max Watts CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX18V 3/ Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for Installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Fumex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. Moving Your Way 7

8 FX081 ENHANCED DIRECT DRIVE 30" Galv. Steel Base = 16 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 16 SQ. Damper Size = 15 ¾ SQ. 28 ¾" 16" x 16" 27 ¼" 24 ¾" x 24 ¾" Model SP SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX081LGP 1/ FX081MGP 1/ FX081WGP 1/ FX081VGP 1/ FX081SGP 1/ FX081RGP 1/ FX081Q1GP 1/ FX081Q2GP 1/ Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. FX101 ENHANCED DIRECT DRIVE 30" 28 ¾" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 16 SQ. Damper Size = 15 ¾ SQ. 24 ¾" x 24 ¾" Model SP SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX101LGP 1/ FX101MGP 1/ FX101WGP 1/ FX101VGP 1/ FX101SGP 1/ FX101RGP 1/ FX101Q1GP 3/ FX101Q2GP 3/ Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. 8 Moving Your Way

9 FX121H ENHANCED DIRECT DRIVE 30" 27 ¼" Galv. Steel Base = 16 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 16 SQ. Damper Size = 15 ¾ SQ. 28 ¾" 16" x 16" 24 ¾" x 24 ¾" Model SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX121HLGP 1/ FX121HMGP 1/ FX121HWGP 1/ FX121HVGP 1/ FX121HSGP 1/ Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. FX131 ENHANCED DIRECT DRIVE 30" 28 ¾" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 16 SQ. Damper Size = 15 ¾ SQ. 24 ¾" x 24 ¾" Model SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX131LGP 1/ FX131MGP 1/ FX131WGP 1/ FX131VGP 1/ FX131SGP 1/ FX131RGP 3/ FX131Q1GP 3/ Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. Moving Your Way 9

10 FX131H ENHANCED DIRECT DRIVE Galv. Steel Base = 16 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 16 SQ. Damper Size = 15 ¾ SQ. 28 ¾" 24 ¾" x 24 ¾" Model SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX131HLGP 1/ FX131HMGP 1/ FX131HWGP 1/ FX131HVGP 3/ Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. FX141 ENHANCED DIRECT DRIVE 30" 28 ¾" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 16 SQ. Damper Size = 15 ¾ SQ. 24 ¾" x 24 ¾" Model SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX141LGP 1/ FX141MGP 1/ FX141WGP 1/ FX141VGP 1/ FX141SGP 3/ Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design Moving Your Way

11 FX161 ENHANCED DIRECT DRIVE 39" 32 ½" 6 ½" 6 ½" 29 ½" Galv. Steel Base = 14 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 20 SQ. Damper Size = 19 ¾ SQ. 31" 39" 20" x 20" 28 ½" x 28 ½" Model SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX161LGP 1/ FX161MGP 1/ FX161WGP 1/ FX161VGP 1* *Single phase motor available on 2. Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. FX181 ENHANCED DIRECT DRIVE 6 ½" 39" 6 ½" 32 ½" 31" 39" 20" x 20" 29 ½" Galv. Steel Base = 14 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 20 SQ. Damper Size = 19 ¾ SQ. 28 ½" x 28 ½" Model SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX181LGP 1/ FX181MGP 1/ FX181WGP 3/ FX181VGP 1 1/2* *Single phase motor available on 2. Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. Moving Your Way 11

12 FX181H ENHANCED DIRECT DRIVE 39" 32 ½" 6 ½" 6 ½" 29 ½" Galv. Steel Base = 14 Gage Aluminum Base = Discharge Apron = Roof/Wall Opening = 20 SQ. Damper Size = 19 ¾ SQ. 31" 39" 20" x 20" 28 ½" x 28 ½" Model SP SP SP SP SP SP CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones FX181HLGP 1/ FX181HMGP 1/ FX181HWGP 1/ FX181HVGP 3/ *Single phase motor available on 2. Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design. FX241H ENHANCED DIRECT DRIVE 7" 46" 7" 36" 34 ½" 46" 25" x 25" 35 ⅞" Galv. Steel Base = 14 Gage Aluminum Base = Discharge Apron = Roof Opening = 25 SQ. Damper Size = 24 ¾ SQ. Max. Motor Frame Size = 184T 33 ½" x 33 ½" Model SP SP SP CFM Sones CFM Sones CFM Sones FX241HLGP 1/ FX241HMGP 3/ FX241HWGP *Single phase motor available on 2. Performance shown is for installation Type A: Free Inlet, Free Outlet. () shown is nominal. Performance is based on actual speed of test. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the air stream. Domex fans are only one component of a total system. As such, fan performance is directly affected by the system. It is critical that system designers determine the actual system loss to ensure that the actual flow is specified in the system design Moving Your Way

13 FX08B BELT DRIVE /4 1/3 1/2 3/4 SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream. Moving Your Way ¾" x 24 ¾" 28 ¾" 30" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Roof/Wall Opening = 16 SQ. Peak B = (/2126) 3 Aluminum Base = Damper Size = 15 ¾ SQ. Max. = 2085 Discharge Apron = Max. Motor Frame Size = 55 Est. Ship Weight = 96 lbs.* * Add 8 lbs. for Heat & Smoke option.

14 FX10B BELT DRIVE B Do not select in shaded area /4 1/3 1/2 3/ / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream Moving Your Way 24 ¾" x 24 ¾" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 28 ¾" 30" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Roof/Wall Opening = 16 SQ. Peak B = (/1869) 3 Aluminum Base = Damper Size = 15 ¾ SQ. Max. = 2085 Discharge Apron = Max. Motor Frame Size = 56 Est. Ship Weight = 96 lbs.* * Add 8 lbs. for Heat & Smoke option.

15 FX12BH BELT DRIVE B Do not select in shaded area /4 1/3 1/2 3/ / / / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream. Moving Your Way ¾" x 24 ¾" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 28 ¾" 30" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Roof/Wall Opening = 16 SQ. Peak B = (/1632) 3 Aluminum Base = Damper Size = 15 ¾ SQ. Max. = 2440 Discharge Apron = Max. Motor Frame Size = 56 Est. Ship Weight = 109 lbs.* * Add 8 lbs. for Heat & Smoke option.

16 FX13B BELT DRIVE B Do not select in shaded area /4 1/3 1/2 3/ / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream Moving Your Way 24 ¾" x 24 ¾" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 28 ¾" 30" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Roof/Wall Opening = 16 SQ. Peak B = (/1751) 3 Aluminum Base = Damper Size = 15 ¾ SQ. Max. = 2202 Discharge Apron = Max. Motor Frame Size = 56 Est. Ship Weight = 110 lbs.* * Add 8 lbs. for Heat & Smoke option.

17 FX13BHFT BELT DRIVE B Do not select in shaded area /3 1/4 3/4 1/ /2 1/ / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream. Moving Your Way ¾" x 24 ¾" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 28 ¾" Galv. Steel Base = 16 Gage Roof/Wall Opening = 16 SQ. Peak B = (/1277) 3 Aluminum Base = Damper Size = 15 ¾ SQ. Max. = 1875 Discharge Apron = Max. Motor Frame Size = 56 Est. Ship Weight = 115 lbs.* * Add 8 lbs. for Heat & Smoke option.

18 FX14B BELT DRIVE B Do not select in shaded area /4 1/3 1/2 3/ / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream Moving Your Way 24 ¾" x 24 ¾" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 28 ¾" 30" 16" x 16" 27 ¼" Galv. Steel Base = 16 Gage Roof/Wall Opening = 16 SQ. Peak B = (/1462) 3 Aluminum Base = Damper Size = 15 ¾ SQ. Max. = 1790 Discharge Apron = Max. Motor Frame Size = 56 Est. Ship Weight = 112 lbs.* * Add 11 lbs. for Heat & Smoke option.

19 FX16B BELT DRIVE B Do not select in shaded area /4 1/3 1/2 3/ / / / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream. Moving Your Way 19 6 ½" 39" 28 ½" x 28 ½" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 31" 39" 6 ½" 32 ½" 20" x 20" 29 ½" Galv. Steel Base = 14 Gage Roof/Wall Opening = 20 SQ. Peak B = (/1095) 3 Aluminum Base = Damper Size = 19 ¾ SQ. Max. = 1755 Discharge Apron = Max. Motor Frame Size = 145T Est. Ship Weight = 144 lbs.* * Add 11 lbs. for Heat & Smoke option.

20 FX18B BELT DRIVE B Do not select in shaded area /4 1/3 1/2 3/ / / / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream Moving Your Way 6 ½" 39" 28 ½" x 28 ½" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 31" 39" 6 ½" 32 ½" 20" x 20" 29 ½" Galv. Steel Base = 14 Gage Roof/Wall Opening = 20 SQ. Peak B = (/999) 3 Aluminum Base = Damper Size = 19 ¾ SQ. Max. = 1430 Discharge Apron = Max. Motor Frame Size = 145T Est. Ship Weight = 145 lbs.* * Add 20 lbs. for Heat & Smoke option.

21 FX18BH BELT DRIVE /3 1/2 3/ /2 B Do not select in shaded area ½" 39" 28 ½" x 28 ½" 31" 39" 6 ½" 32 ½" 20" x 20" 29 ½" Galv. Steel Base = 14 Gage Roof/Wall Opening = 20 SQ. Peak B = (/1106) 3 Aluminum Base = Damper Size = 19 ¾ SQ. Max. = 1870 Discharge Apron = Max. Motor Frame Size = 145T Wall Mounted Max. = 2 Est. Ship Weight = 142 lbs. (Add 20 lbs. for Heat & Smoke option.) SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 1/ / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream. Moving Your Way 21

22 FX24B BELT DRIVE /3 3/4 1/ / B Do not select in shaded area. 7" 46" 33 ½" x 33 ½" 34 ½" 46" 7" 36" 25" x 25" 35 ⅞" Galv. Steel Base = 14 Gage Roof/Wall Opening = 25 SQ. Peak B = (/716) 3 Aluminum Base = Damper Size = 24 ¾ SQ. Max. = 1360 Discharge Apron = Max. Motor Frame Size = 184T Wall Mounted Max. = 2 Est. Ship Weight = 190 lbs. (Add 40 lbs. for Heat & Smoke option.) SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B / / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream Moving Your Way

23 FX24BH BELT DRIVE B Do not select in shaded area /4 1/ / " 46" 33 ½" x 33 ½" 34 ½" 46" 7" 36" 25" x 25" 35 ⅞" Galv. Steel Base = 14 Gage Roof Opening = 25 SQ. Peak B = (/827) 3 Aluminum Base = Damper Size = 24 ¾ SQ. Max. = 1620 Discharge Apron = Max. Motor Frame Size = 184T Wall Mounted Max. = 2 Est. Ship Weight = 187 lbs. (Add 40 lbs. for Heat & Smoke option.) SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 1/ / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream. Moving Your Way 23

24 FX27B BELT DRIVE /2 1/3 3/ / / /2 3/ / B Do not select in shaded area. 6 ½" 53 ½" 36 ½" x 36 ½" SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B ½" Galv. Steel Base = 14 Gage Roof Opening = 28 SQ. Peak B = (/539) 3 Aluminum Base = Damper Size = 27 ¾ SQ. Max. = 1188 Discharge Apron = Max. Motor Frame Size = 184T Est. Ship Weight = 219 lbs.* * Add 55 lbs. for Heat & Smoke option Moving Your Way

25 FX30B BELT DRIVE B Do not select in shaded area /2 1/3 1 3/ / / / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream. Moving Your Way 25 6 ½" 53 ½" 36 ½" x 36 ½" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 35 ½" Galv. Steel Base = 14 Gage Roof Opening = 28 SQ. Peak B = (/539) 3 Aluminum Base = Damper Size = 27 ¾ SQ. Max. = 1188 Discharge Apron = Max. Motor Frame Size = 184T Est. Ship Weight = 219 lbs.* * Add 65 lbs. for Heat & Smoke option.

26 FX36B BELT DRIVE B Do not select in shaded area /2 3/4 1 1/ /2 1/ / / / Performance shown is for installation type A: Free Inlet, Free Outlet. Power rating (B) does not include transmission losses. For further information on estimating belt drive losses and motor service factors see page 12. The sound ratings shown are for loudness values in fan sones at 5 0 (1.5m) in a hemispherical free field per AMCA Standard 301. Values shown are for installation Type A: free inlet hemispherical sone levels. Performance ratings do not include the effects of appurtenances in the airstream Moving Your Way 5 ½" 66" 44 ½" x 44 ½" SP SP SP SP SP SP SP SP SP SP Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B Sones B 47 ½" Galv. Steel Base = 12 Gage Roof Opening = 36 SQ. Peak B = (/384) 3 Aluminum Base = Damper Size = 35 ½ SQ. Max. = 810 Discharge Apron = Max. Motor Frame Size = 213T Est. Ship Weight = 470 lbs.* * Add 110 lbs. for Heat & Smoke option.

27 NOTES Moving Your Way 27

28 From office buildings and manufacturing plants to schools, hospitals and other commercial applications, PennBarry is defining the next level of air movement for the industry. Find out more about the full line of PennBarry fan products for commercial and industrial applications at PennBarry Tel: Fax: PennBarry reserves the right to make changes at any time, without notice, to models, construction, specifications, options or availability. This bulletin illustrates the appearance of PennBarry products at the time of publication. View the latest updates on the PennBarry website. Copyright 2017 PennBarry. All Rights Reserved. NOVEMBER 2017