Conveyor system XB. System information X45 XLP X85 X85P XKP FST XMY XLX XMX GRX CSX ELV CTL APX IDX. Chain width 175/295 mm.
|
|
- Anne Paul
- 5 years ago
- Views:
Transcription
1 Conveyor system System information PO X45 XS Chain width 175/295 mm Features Chain travels on four slide rails. Wide track sideflexing safety chain. Compact horizontal and vertical bends. Suitable for soft packages. Examples of application areas Large cardboard boxes, products in soft plastic bags. Examples: detergent powder, wrapped tissue paper rolls, food products, personal care products. Technical characteristics Drive unit capacity N Chain tension limit N Beam width /00 mm Chain width /295 mm Chain pitch...,5 mm Item width mm Maximum item weight kg Maximum weight on conveyor... kg Maximum conveyor length... 0 m XL XLP X85 X85P XH XK XKP G CS XT XC XF XD FST XMY XLX XMX GX CSX ELV CTL T APX IDX System information
2 Chains Plain chain 175 mm Friction top chain 295 mm ,5 Plain chain Length m TP A175 Plain link kit * * Link kit contains 10 links, 10 pivots, 10 steel pins Friction top chain 175 mm 175 Friction top chain Length m TP A175 F# Enter cleat frequency (1 20) instead of # in product designation. Friction top link kit * * Link kit contains 10 links, 10 pivots, 10 steel pins 7 2,5 Friction top chain Length m TP A295 F# Enter cleat frequency (1 10) instead of # in product designation. Friction top link kit Kit with 10 links * *Note. Links are delivered as a kit containing 10 links and the necessary steel pins and plastic pivots. Other chains See the FlexLink chain guide for a selection of other chains. Chain installation See Appendix C, page 417, for installation instructions. oller cleat link 175 mm ,5 oller cleat link TL oller cleat chain must be ordered as plain chain plus desired number of roller cleat links. Cannot be ordered as chain Plain chain 295 mm Plain chain Length m TP A295 Plain link kit * * Link kit contains 10 links, 10 pivots, 10 steel pins Chains
3 Chain accessories Plastic pivot TT 1 16 Plastic pivot kit Each kit contains 25 items. Steel pin XMTD 6 50 Steel pin kit Each kit contains 25 items. Beam components Pin insertion tool for chain Pin insertion tool X85- X85--XH, PO version* XMMJ 6 MJ 6 P *This tool is recommended for frequent users Lubricant for chain LDSS 450 Silicone-based lubricant LDSS 450 PO X45 XS XL XLP X85 X85P XH XK XKP G CS XT Beam section (182 mm version) Beam (mid-section) XC XF XD FST Beam section (assembled) Length m Length to order (0,5 m) Slide rail: see page 219 CB A175 CB LA175 Beam (mid-section) Length m (00 ±5 mm) Length to order (0-000 mm) Beam (outer section) CB A85 CB LA85 XMY XLX Beam section kit (00 mm version) XMX 00 GX CSX Beam section kit Length m Length to order (0,5 m) CB A295 CB LA295 Beam (outer section) Length m (00 ±5 mm) Length to order (0-000 mm) CB A H CB LA H ELV CTL T The beam section is delivered unassembled. Slide rail: see page 219 APX IDX Chain accessories
4 Beam components (continued) Profile for split conveyor beam (inner section) Beam clip assembly Profile for split conveyor beam Length m (00 ±5 mm) Length to order (0-000 mm) Clip kit for outer beam sections CB A85 H CB LA85 H Beam clip assembly CE Including M8 screw and locking nut. Use minimum 5 clips per meter. Place clips 100 mm from each end. Note. Must be ordered in multiples of 10. Mounting tool for clip kit Snap-fit clip kit for outer beam sections CE 40 Each kit contains two clips. For construction of 182 mm wide beam sections. Mounting tool: see below. Maximum distance between clips is 0,5 m. Mounting tool for aluminium clip kit CE Beam section for chain installation Spacer for outer beam sections 85 Spacer, aluminium, one pair CE 85 Including screws and nuts. For construction of 00 mm wide beam sections. Maximum distance between spacers is 0,5 m. 50 Beam section for chain installation Including connecting strips and screws CC 00A Beam accessories Connecting strip with set screws L Cover strip for T-slot, aluminium M8 h 6 Connecting strip with set screws h=20, a=44, b=44, L=160 XSCJ Note. Must be ordered in multiples of 10 Cover strip for T-slot, PVC a b a 11,8 0,9 Cover strip for T-slot Aluminium, anodized Length 2 m XCAC 2 For XK- 10, 0,5 Cover strip for T-slot, grey PVC Length m For XK- XCAC P Beam accessories
5 Slide rails Plastic slide rail for beam 2,5 Slide rail Length 25 m HDPE (Black) PA-PE (Grey) C 25 C 25 H See Appendix A, page 407 for selection guidelines and assembly instructions. Plastic slide rail for beam, outer Plastic screws for slide rail Plastic screws 5 mm for XS-XL-X85- XH- beams XLAG 5 Note. Must be ordered in multiples of 50 Drill fixture for slide rail PO X45 XS XL XLP X85 X85P d mm XH Slide rail, outer UHMW-PE (μ=0,1 0,25) (Grey) Length m C UA See Appendix A, page 407 for selection guidelines and assembly instructions. Mounting tool for slide rail, Mounting tool for slide rail M 170 Aluminium rivets 6 XLAH 4 7 Aluminium rivets 4 mm for XK- conveyors, brown XLAH 4 7 Extra slide rail in plain bends must be anchored using plastic screws due to lack of space for the rivet crimping tool. Note. Must be ordered in multiples of , Drill fixture for XL-X85-XH-XK- slide rail d=4,2 mm ivet crimping pliers ivet crimping pliers for XL-X85-XH- XK- For 4 mm rivets ivet crimping clamp ivet crimping clamp for XL-X85-XH-XK- For 4 mm rivets 95 XK XKP G CS XT XC XF XD FST XMY XLX XMX GX CSX ELV CTL T APX IDX Slide rails
6 End drive units 175, direct drive, no slip clutch End drive unit for 175 mm chain End drive unit for 175 mm chain Variable speed: see page 40 Motor on left side Effective track length: 0, m EB A175 EB 0A175 LP Variable speed: see page 40 Motor on right side Effective track length: 0, m EB A175 EB 0A175 P End drive units 175, direct drive, slip clutch End drive unit for 175 mm chain End drive unit for 175 mm chain Variable speed: see page 40 Motor on left side EB A175 EB 0A175 LPB Maximum traction force: 1250 N. See page 19. Effective track length: 0, m Variable speed: see page 40 Motor on right side EB A175 EB 0A175 PB Maximum traction force: 1250 N. See page 19. Effective track length: 0, m End drive units 175, direct drive, no slip clutch
7 End drive units 295, direct drive, no slip clutch PO End drive unit for 295 mm chain End drive unit for 295 mm chain X45 XS XL XLP X X85P XH 00 XK XKP 00 Variable speed: see page 40 Motor on left side EB A295 EB 0A295 LP Maximum traction force: 1250 N. See page 19. Effective track length: 0, m Variable speed: see page 40 Motor on right side EB A295 EB 0A295 P Maximum traction force: 1250 N. See page 19. Effective track length: 0, m G CS XT XC XF XD FST XMY XLX XMX GX CSX ELV CTL T APX IDX End drive units 295, direct drive, no slip clutch
8 End drive units 295, direct drive, slip clutch End drive unit for 295 mm chain 16 End drive unit for 295 mm chain Variable speed: see page 40 Motor on left side EB A295 EB 0A295 LPB Maximum traction force: 1250 N. See page 19. Effective track length: 0, m Variable speed: see page 40 Motor on right side EB A295 EB 0A295 PB Maximum traction force: 1250 N. See page 19. Effective track length: 0, m Idlers 175 Idler end unit for 175 mm chain Protective cover for idler end unit Idler end unit Effective track length: 0, m EJ A175 Protective cover for idler end unit SJ 197A175 End drive units 295, direct drive, slip clutch
9 Idlers 295 Idler end unit for 295 mm chain PO X XS 152 XL XLP Idler end unit EJ A295 Effective track length: 0, m Horizontal plain bends 175 Horizontal plain bend, 0 for 175 mm chain 0 Horizontal plain bend, 45 for 175 mm chain 45 X85 X85P XH XK XKP G CS XT Horizontal plain bend, 0 ±1 =500±10 mm =700±10 mm =1000±10 mm 500: 1,5 m (top+bottom) 700: 1,55 m (top+bottom) 1000: 1,85 m (top+bottom) BP 0A1755 BP 0A1757 BP 0A17510 Horizontal plain bend, 45 ±1 =500±10 mm =700±10 mm =1000±10 mm 500: 1,60 m (top+bottom) 700: 1, m (top+bottom) 1000: 2,40 m (top+bottom) BP 45A1755 BP 45A1757 BP 45A17510 XC XF XD FST XMY XLX XMX GX CSX ELV CTL T APX IDX Idlers 295
10 Horizontal plain bends 175 (continued) Horizontal plain bend, 60 for 175 mm chain Horizontal plain bend, for 175 mm chain 60 Horizontal plain bend, 60 ±1 =500±10 mm =700±10 mm =1000±10 mm 500: 1,85 m (top+bottom) 700: 2,0 m (top+bottom) 1000: 2, m (top+bottom) BP 60A1755 BP 60A1757 BP 60A17510 Horizontal plain bend, ±1 =500±10 mm =700±10 mm =1000±10 mm 500: 2,40 m (top+bottom) 700:,00 m (top+bottom) 1000:,95 m (top+bottom) BP A1755 BP A1757 BP A17510 Horizontal plain bends 295 Horizontal plain bend, 0 for 295 mm chain Horizontal plain bend, 45 for 295 mm chain 0 45 Horizontal plain bend, 0 ±1 =700±10 mm =1000±10 mm 700: 1,55 m (top+bottom) 1000: 1,85 m (top+bottom) BP 0A2957 BP 0A29510 Horizontal plain bend, 45 ±1 =700±10 mm =1000±10 mm 700: 1, m (top+bottom) 1000: 2,40 m (top+bottom) BP 45A2957 BP 45A29510 Horizontal plain bends 295
11 Horizontal plain bends 295 (continued) Horizontal plain bend, 60 for 295 mm chain Horizontal plain bend, for 295 mm chain PO X45 XS 60 XL XLP X85 Horizontal plain bend, 60 ±1 =700±10 mm =1000±10 mm 700: 2,0 m (top+bottom) 1000: 2, m (top+bottom) BP 60A2957 BP 60A29510 Horizontal plain bend, ±1 =700±10 mm =1000±10 mm 700:,00 m (top+bottom) 1000:,95 m (top+bottom) BP A2957 BP A29510 X85P XH XK XKP Vertical bends 175/295 Vertical bend, 5 for 175/295 mm chain Vertical bend, 5 BV 5A750 Four outer section beam pieces, unassembled. Will fit both chain widths (175 mm and 295 mm). Effective track length: 0,50 m (top+bottom) Vertical bend, 15 for 175/295 mm chain Vertical bend, 15 BV 15A750 Four outer section beam pieces, unassembled. Will fit both chain widths (175 mm and 295 mm). Effective track length: 0,75 m (top+bottom) G CS XT XC XF XD FST XMY XLX XMX GX CSX ELV CTL T APX IDX Vertical bends 175/295
12 Vertical bends 175/295
Conveyor system X300. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Chain X300. Technical characteristics
Conveyor system X300 Contents System information...281 Chains X300...282 Chain accessories X300...282 Beam components X300...283 Beam accessories X300...284 Slide rails X300...284 Drive and idler units
More informationConveyor system X300. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Chain X300. Technical characteristics
Conveyor system X300 Contents System information...279 Chains X300...2 Chain accessories X300...2 Beam components X300...281 Beam accessories X300...282 Slide rails X300...282 Drive and idler units introduction...284
More informationConveyor system X180. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Chain X180. Technical characteristics
Conveyor system X1 Contents System information...271 Chains X1...272 Chain accessories X1...27 Beam components X1...27 Beam accessories X1...2 Slide rails X1...275 Drive and idler units introduction...276
More informationConveyor system XH Contents System information Chain width 103 mm Technical characteristics Features Examples of application areas
Conveyor system Contents System information...215 Chains...216 Chain accessories...217 Beams...217 Beam accessories...218 Slide rails...219 Slide rails, hardened steel...220 Drive and idler units introduction...221
More informationModular plastic belt conveyor WK
Modular plastic belt conveyor Contents System information...405 Belts introduction...406 Belts...407 Conveyor sections...408 Conveyor frame components introduction...409 Conveyor frame components...410
More informationConveyor system XK. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Examples of application areas
Conveyor system XK Contents System information...235 Chains XK...236 Chain accessories XK...237 Beams XK...237 Beam accessories XK...238 Slide rails XK...238 Slide rails, hardened steel XK...239 Drive
More informationStructural system XF. System information X45 XLP X85 X85P XKP FST XMY XLX XMX GRX CSX ELV CTL APX IDX. Features. T-slot dimensions
Structural system System information PO X5 XS XL XLP X85 X85P XH XK XKP XB GR CS XT Features XC XD FST XMY The FlexLink system includes two basic beam types: support beams (BM) in cross-sectional dimensions
More informationModular plastic belt conveyor WL
Modular plastic belt conveyor WL Contents System information...389 Conveyor sections...390 Belts introduction...391 Belts...392 Accessories for use with Friction top belt...392 Conveyor frame components
More informationConveyor system X65. System information X45 X65 X65P X85 X85P. XKP Examples of application areas
Conveyor system Contents System information...111 Chains...112 Chain accessories...114 Beams...114 Beam accessories...115 Tools for conveyor beam...116 Slide rails...116 Slide rails, hardened steel...117
More informationConveyor system X85 Contents System information Chain width 83 mm Technical characteristics Features Examples of application areas
Conveyor system X85 Contents System information...157 Conveyor modules...158 Chains introduction...159 Chains...160 Chain accessories...162 Accessories for use with steel chain 5056849...163 Conveyor beam
More informationStructural system XF. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Features.
Structural system Contents System information...1 Beams...2 Connectors...2 System information Features Feet... Enclosure components... T-slot dimensions 7,2±0, PO CC X5 XS X65 X65P X85 X85P XH XK XKP X180
More informationStainless steel conveyor system XLX
Stainless steel conveyor system XLX Contents System information...21 Chains XLX...22 Chain accessories XLX...23 Beams XLX...23 Beam accessories XLX...23 Slide rails XLX...24 End drive units XLX...25 System
More informationConveyor system FS FS -
Conveyor system Contents Chains 3 Conveyor beam 5 End drive units 7 Idler units 10 Horizontal wheel bends 12 Horizontal plain bend 14 Vertical bends 16-1 Chains - 2 Chains Plain chain TP 5 Plain chain
More informationConveyor system FS F45 F65 F85 FLX FMX FHX ACC PAL IDX FB140 FB175 FB295 FS - TOOL SPIRAL FBX175 FBX295
Conveyor system F45 FT FL F65 FM F85 FH FB140 FB175 FB295 SPIRAL FW FLX FMX FHX FBX175 FBX295 ACC Contents Chains 3 Conveyor beam 5 End drive units 7 Idler units 10 Horizontal wheel bends 12 Horizontal
More informationStainless steel conveyor system X180X
Stainless steel conveyor system XX Contents System information...43 Conveyor chain...43 Chain accessories...44 Conveyor beams...45 Slide rails...46 Tools for conveyor beam...47 Drive and idler units introduction...48
More informationStainless steel conveyor system X85X
Stainless steel conveyor system XX Contents System information...27 Conveyor chain...28 Chain accessories...29 Conveyor beams...30 Slide rails...32 Tools for conveyor beam...33 Drive and idler units introduction...34
More informationFlexLink conveyor Series Y
FlexLink conveyor Series Y 3 Introduction New conveyor with focus on hygiene The new FlexLink hygiene conveyor was designed to meet the following requirements of special interest to the dairy, food, and
More informationConfigurable Components
Configurable Components Contents Building a FlexLink system...31 Modular conveyors introduction...33 Modular conveyors...34 Modular conveyors Configuration strings...35 X45 horizontal conveyor Configuration
More informationSpare parts Conveyor system XB
Conveyor system XB Conveyor system XB FlexLink catalogue 1 Conveyor system XB 2 FlexLink catalogue Conveyor system XB Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers
More informationConveyor system X45. Introduction X45H. Conveyor system X45 49 X65 X65P. Conveyor System X45C 53 X85 X85P
Conveyor system Contents Conveyor system 49 Introduction...49 System information...50 Technical characteristics...51 Basic and common guidelines C and H...52 Conveyor System C 53 Conveyor introduction...53
More informationConveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2
Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal
More informationDescription 315 mm width thermoplastic belt with aluminium frame conveyor system
AP DF2 DR2 DT2 DX2 DL2 DM3 DS2 MA MB MG MF2 MR2 MT2 MX2 ML2 MM3 MS2 TR Conveyor System DT2 Description 315 mm width thermoplastic belt with aluminium frame conveyor system Examples of application industries
More informationModular belt conveyor WL678X
Modular belt conveyor 678X Contents System information...139 Conveyor sections...140 Modular Belts - Introduction...141 Modular belts...142 Conveyor Beams - Introduction...143 Conveyor frame components...145
More informationModular belt conveyor WL526X
Modular belt conveyor 526X Modular plastic belt conveyor 526X Contents System information...123 Conveyor sections...124 Modular Belts - Introduction...125 Modular belts...126 Conveyor Beams - Introduction...127
More information5683EN. Conveyor system WL. Conveyor assembly manual. Created by EBCCW 00:06
Created by EBCCW 00:06 by EBCCW 96:05 00:06 5683EN Conveyor system WL Conveyor assembly manual Created by EBCCW 96:05 00:06 Created by EBCCW 00:06 by EBCCW 96:05 00:06 5683EN Conveyor system WL Created
More informationX85 conveyor system. System information. X85 conveyor system X85 introduction. X85 pallet system. X85 pallet control. Index. Technical characteristics
X85 conveyor system System information Technical characteristics Beam width Chain width Chain pitch Drive unit capacity Chain tension limit Item width Maximum conveyor length Maximum weight on conveyor
More informationModular belt conveyor WL374X
S Modular belt conveyor Contents System information...107 Conveyor sections...109 Modular Belts - Introduction...110 Modular belts...111 Conveyor Beams - Introduction...112 Conveyor frame components...114
More informationConveyor support components
Conveyor support components PO X45 P Beams, brackets and feet P Beams Most conveyor support designs are based on vertical support beams combined, if necessary, with horizontal support beams. The conveyor
More information300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
More information150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
More informationCONVEYOR SYSTEMS XS, XL, XM, XH, XK, XB Maintenance manual
CONVEYOR SYSTEMS XS, XL, XM, XH, XK, XB Maintenance manual 1 General safety and design considerations... 1 1.1 Introduction... 1 2 Safety... 3 2.1 System information... 3 2.2 Important safety conditions...
More informationSpare parts Conveyor system XS
Conveyor system XS 15 http://www.flexlink.com 16 Content Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission
More informationFS SERIES. FS Series Characteristic Beam Width: 65mm Product Width: Refer to Guide Rail Assembly
SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width to be conveyed can be referred to guide rail assembly
More informationFC SERIES. FC Series Characteristic Beam Width: 105mm Product Width: Refer to Guide Rail Assembly
Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width to be conveyed can be referred
More informationSpare parts End drive unit-xh... 1
Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure
More informationStainless steel systems
Stainless steel systems Copyright FlexLink 2014 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has
More informationSC 103mm Stainless Steel Conveyor System
SC 103mm Stainless Steel Conveyor System SC FlexMove Product Catalogue 347 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. SC Series
More informationMaintenance manual XT modules
Maintenance manual XT modules Copyright FlexLink 2013 The contents of this publication are the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has been taken
More information83mm Stainless Steel Conveyor System
SM 83mm Stainless Steel Conveyor System SM FlexMove Product Catalogue 333 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. SM Series
More informationSS 63mm Stainless Steel Conveyor System
SS 63mm Stainless Steel Conveyor System SS FlexMove Product Catalogue 319 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. FV Series
More informationconveyor and pallet handling systems
xb SPARE parts conveyor and pallet handling systems Conveyor system XB Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts)
More informationStructural system XC PAL. Contents FST APX IDX
Structural system XC PO TR XS XL XM XH XK XW CA PAL Contents A structure for every specific application 2 Application examples 3 Components 15 Support beams and small beams 16 Introduction to connectors
More informationSpare parts Conveyor system X85
Conveyor system X85 Conveyor system X85 FlexLink catalogue i Conveyor system X85 Drawings are made to European standards. Content Ó Copyright FlexLink 0 The contents of this publication are the copyright
More informationFL SERIES: 150 mm Conveyor System
: 150 mm Conveyor System Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width
More informationSpare parts Conveyor system X65
Conveyor system X65 Spare parts Conveyor system X65 FlexLink Spare parts catalogue i Conveyor system X65 ii FlexLink Spare parts catalogue Conveyor system X65 Content Copyright FlexLink 2013 The contents
More informationCONVEYOR SYSTEM X85/X180/X300 MAINTENANCE MANUAL
CONVEYOR SYSTEM X85/X180/X300 MAINTENANCE MANUAL Flexlink AB 2014 All Rights Reserved No part of this program and manual may be used, reproduced, stored or transmitted in any form or by any means without
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationVarioFlow Lateral Guide Generation 2. Customer Presentation
VarioFlow Lateral Guide Generation 2 Customer Presentation Market Requirements Your requirements: A compact, clearly designed lateral guide system for numerous standard applications and customized solutions
More informationSECTION B Manual Transaxle/Transmission TR6060
308-03B-i Manual Transaxle/Transmission TR6060 308-03B-i SECTION 308-03B Manual Transaxle/Transmission TR6060 CONTENTS PAGE Transmission... 308-03B-2 308-03B-2 Manual Transaxle/Transmission TR6060 308-03B-2
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationFB Structural System. FlexMove Product Catalogue
Structural System 1 SB-40x40 Support Beam 40x40 Aluminium Anodized UOM : 3 meter / length SB-64x64 Support Beam 64x64 Aluminium Anodized UOM : 3 meter / length SB-64x64C Close slot Support Beam Aluminium
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationxs spare parts conveyor and pallet handling systems
xs spare parts conveyor and pallet handling systems Conveyor system XS Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts)
More informationSerial Number: Manufacturing Date: /20
Sunrise Medical Head Office: 237 Romina Drive, Unit 3 Concord, ON L4K 4V3, Canada Telephone: +1.800.263.3390 Fax:+1.800.561.5834 csrcanada@sunmed.com www.sunrise.ca Distributor Name: Dealers Name: Contact
More informationSpare parts Conveyor system X85
Conveyor system X85 Conveyor system X85 FlexLink 07 FlexLink catalogue i Conveyor system X85 ii FlexLink catalogue FlexLink 07 Conveyor system X85 Content Copyright FlexLink 07 The contents of this publication
More informationSkyline 4 Fascia Fabrication & Installation Instructions
Components Needed Page 2 Tools Needed Page 2 System Diagram Page 3 Instructions Step 1: Install Brackets Page 4 Step 2: Install Pre-assembled Shade Page 4 Step 3: Install Fascia Clip Page 4 Step 4: Cut
More informationSerial Number: Manufacturing Date: /20
Sunrise Medical Head Office: 237 Romina Drive, Unit 3 Concord, ON L4K 4V3, Canada Telephone: +1.800.263.3390 Fax:+1.800.561.5834 csrcanada@sunmed.com www.sunrise.ca Distributor Name: Dealers Name: Contact
More informationconveyor and pallet handling systems
xh SPARE parts conveyor and pallet handling systems Conveyor system XH Content Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even
More informationCONVEYOR SYSTEM WLX. Engineering guideline
CONVEYOR SYSTEM WLX Engineering guideline Created by EBCCW 00:06 1 Modular plastic belt conveyor WLX Easy clean 1 1.1 System overview 1 1.2 Separation of larger surfaces 2 1.3 Small contact surfaces 2
More informationPARTNER 5.5 HP 17" REAR TINE TILLER MODEL NO. 511 (PRT5N)
ILLUSTRATED PARTS BREAKDOWN PARTNER 5.5 HP 17" REAR TINE TILLER MODEL NO. 511 (PRT5N) 954 00 13-81 171280 1.3.00 TR HANDLES 1 532127012 Throttle, Control 2 532141406 Grip, Handle 3 532110673 Grommet, Handle
More informationSpring Steel Fasteners
Conduit Supports 1 Available for 3/8 No tools needed! in. through 2 in. Finger friendly trade sizes for design! EMT, flexible conduit and MC/ AC cable Available with either a plain hole for 1/4 in. bolt
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More informationSpare Parts B WR
7 CRT 52 1.1997 Spare Parts 954 14 00-20B WR 01-07-98 HANDLE ASSEMBLY 1 871191008 Screw, Phd. #10-24 UNC 2 532126956 Panel, Control 3 532104164 Tie, Cable 4 532124797 Grip, Handle 5 532124788 Clip, Hairpin
More informationSECTION Automatic Transaxle/Transmission 6R80
307-01-i Automatic Transaxle/Transmission 6R80 307-01-i SECTION 307-01 Automatic Transaxle/Transmission 6R80 CONTENTS PAGE Transmission... 307-01-2 307-01-2 Automatic Transaxle/Transmission 6R80 307-01-2
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationXl pleated blind absolute. 50 mm
Xl pleated blind absolute 50 mm All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying,
More informationmk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
More informationalong with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.
Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE
More information300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
More informationCRT 51. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar I SERVICE
SERVICE 8 I9900001 IPL, CRT 51, 1999-02, 106 23 87-67 CRT 51 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar Replaces Ersetzt Remplace Vervangt Reemplaza Ersätter 106
More informationSUPPORT ALU. Aluminium Support ECA ERA EMST ETS.
www.easy-conveyors.com SUPPORT ALU ECA ERA EMST ETS Aluminium Support The conveyors are held in place by a well balanced range of support components, with beam support brackets, support beams, feet, etc.
More informationl : u-: .. tt Installation Instructions Model 300 Commercial Slat Door DIAGRAM 4 DIAGRAM 1 5/16" 25 - DIAGRAM 2 --, f-a- 1/2" 24.
Commercial Doors Direct 903 Jan Mar Ct. Clermont, FL 34711 1-877-357-DOOR (3667) commercialdoorsdirect.com Installation Instructions Model 300 Commercial Slat Door 12 DIAGRAM 4 19 l : u-: ; - DIAGRAM 1..
More informationTop Down Rollstar Shade Installation Instructions
Top Down Rollstar Shade Installation Instructions Thank you for purchasing your new Rollstar shade. It has been custom-made from the highest quality materials to the dimensions you specified. With proper
More information4g.1 - Flatbed Feeder Main Assembly A4440A
PAGE NO. 1 OTHER ASSEMBLIES NOT SHOWN ON THIS DRAWING: A7029A - LONG CONVEYOR ASSEMBLY - SECTION 4g.2 A7101A - SEPARATOR (FB) ASSEMBLY - SECTION 4g.8 A7103A - CHASSIS ASSEMBLY - SECTION 4g.9 A7107A - TOP
More informationSPARE PARTS MANUAL FOR TKF 4SC60 FOUR STRAND CONTINUOUS VERTICAL CONVEYOR
SPARE PARTS MANUAL FOR TKF 4SC60 FOUR STRAND CONTINUOUS VERTICAL CONVEYOR PREPARED BY: T.K.F. INC. 726 MEHRING WAY CINCINNATI, OHIO 45203 PHONE: (513) 241-5910 FAX: (513) 651-2792 WEBSITE: http:/www.tkf.com
More informationTransLift TL 2550K Parts Manual
TransLift TL 2550K Parts Manual Tink, I nc. 2361 D urham Dayton H w y D urham, C A 95938 Toll Free 888-367-8465 Fax 530-895-0751 w w w.tink inc.co ṁ Table of Contents Full Assembly View... 2 Tank View...
More informationServing Industrial Markets Since 1961:
Full Line Brochure Clutches Brakes Clutch Brakes Caliper Brakes & Rotors Torque Limiters Air Shaft Seals Sheaves Serving Industrial Markets Since 1961: Food Processing & Packaging Material Handling Printing
More informationZoom and Print Options
1 of 63 8/26/2017, 7:04 AM Vehicle» Transmission and Drivetrain» Transfer Case» Service and Repair» Procedures» Isuzu T150» Overhaul (Unit Repair)» 1. Transfer Case Disassemble Transfer Case Disassemble
More informationHSpecialties Inc. TABLE OF CONTENTS
TABLE OF CONTENTS Introduction... Curtain Track Selection Guide...2 Ordering COMPLETE Tracks...3 00 Series Standard-Duty Straight Track...4 200 Series Black Medium-Duty Straight Track...8 300 Series Standard-Duty
More informationChain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.
ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal
More informationSpare parts Conveyor system XK
Conveyor system XK FlexLink catalogue 0 Conveyor system XK i FlexLink catalogue Conveyor system XK Content Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More information600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS
600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. A. BI-PARTING TRAVEL 1. Before raising track into position, determine location of
More informationSERIAL NUMBERS
J.E. LOVE COMPANY TREE SEEDLING HARVESTER SERIAL NUMBERS 103-114 FORESTRY PRODUCTS GROUP P.O. BOX 188 GARFIELD, WA 99130-0188 PHONE: (509) 635-1321 FAX: (509) 635-1434 Manufacturers of Special Harvesting
More information1000/1200 Service Manual. 4j.1 - Vertical Stacker Main Chassis. Page 4j-1. SENSORS Item Description Part No. Wiring S1 Entry TX*
Page 4j-1 5 Feb 2012 SENSORS Item Description Part No. Wiring S1 Entry TX* 182-443 5.49 *See section 4j-8 for corresponding RX 4j.1 - Vertical Stacker Main Chassis Page 4j-1 Page 4j-2 1 Mar 2012 4j.1 -
More informationInstallation InstructionS RB 500 Manual Roller Shades Heavy Duty Clutch Coupled Fascia Series-Coupled Unit...
Installation InstructionS RB 500 Manual Roller Shades Heavy Duty Clutch Coupled Fascia 5-37 Series-Coupled Unit... Installation b a c Install the clutch bracket and intermediate bracket first. a) recess
More informationPage 1. Special Devices SD SD1 - SD6 2. Special Equipment SE SE1 - SE4 3. Tools TL TL1 - TL3
Catalogue MODU M Series Conveyor Thermoplastic Chain with Aluminium Based Conveyor Systems 1. Application Photos AP AP1 - AP9 2. TR1 - TR19 3. Conveyor System MS2 MS1 - MS9 4. Conveyor System MM3 MM1 -
More informationTOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES
MODEL NO. 44220-60001 & UP FORM NO. 01-505-1741 Rev. A PARTS CATALOG TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES BASE & FRAME ASSEMBLY 1800-3 Part 1 92-4350 Frame - Topdresser 1 2 92-4364 Bracket
More informationFANEX 833 T / Table of Contents
FANEX 833 T / Table of Contents PosNo. Assembly group Page B MIDDLE GEAR BOX 1 B CIRCLE GEAR BOX 2 B DRIVE SHAFT 3 B SIMPLE JOINT WALTERSCHEID 4 B WINDROWING GEAR W 5 B GEAR BOX W 6 B UNIV.PROP.SHAFT LZ=1260
More informationRoller Shades CORD LOOP. Head Rail, Fascia and No Head Rail. Installation & Care Instructions
Roller Shades CORD LOOP Head Rail, Fascia and No Head Rail Installation & Care Instructions 152038 H 5/30/2017 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill, drill bits
More information19" chassis F. Downloads and further important information can be found on the Internet under Overview Cabinets...
Overview... 0 Cabinets... 1 19" chassis Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02192001 Subracks/ 19" chassis... 6 ront panels,
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationEnergy Supply Systems
Energy Supply Systems SINGLE POLE INSULATED CONDUCTOR RAIL 815 100 amps KAT0815-0001b-E Conductor rail system in a high bay storage Slip ring with conductor rail system in a stretch-foil packing machine
More informationSeries R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]
Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5
More informationEZ ROLL (ROLLER SHADE) COMPONENTS APRIL 2018
EZ ROLL CLUTCH FOR 1 1/8 TUBING Holds up to 5 lbs. R-CL5-EZ-XX R-CL8-EZ-XX R-CL8-1.5-EZ-XX Used on R-T5-U-1.125 (1 1/8 Tube) - 23 Ball (BK) Black, (SW) Snow White US Patent No. D6300086S China Patent CN201248601Y
More informationROLL-A-GLIDE INSULATED ROLLER DOOR. Installation Instructions
ROLL-A-GLIDE INSULATED ROLLER DOOR Installation Instructions 1. Motor 13. Brush Strips 2. Axle Assembly 14. Curtain Assembly 3. Rigid Link Collars 15. Door Laths 4. Octagonal Plug End 16. Locking Caps
More information12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.1 MAIN RUNNER SPLICE. SPECIFICATIONS (unless noted otherwise)
12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.1 4' OPEN CELL RUNNER SEE DETAIL A1.7 FOR INFILL PANEL FIXTURE OPENING RECOMMENDATIONS CROSS RUNNER FIELD CUT AT PERIMETER TYPICAL SYSTEM
More informationSuper-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
More informationParts Manual x x85. Models
Parts Manual Models 6271270x85 1741581 6271270x85 Auger Housing NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0011 4 Auger Housing REF NO PART NO. 480 1501211MA
More information~~ " '" :.~ ~. -~ :: ø U) 6Â~ l\ '---_._ , " ~ -1rr-~.." fj PECULIAR HYDRAULICS. " f ',~, ...
FORD V8-30, 35 W-W/O AC 988-99 PECULIAR HYDRAULICS BELT DRIVE, SLC UNDERHOOD VALVE ~. _ Ln c. " f 000000 HPS59 REV. E, ~ ~~ " '" --- -. ',~, ~ -rr-~.." fj..-:.~ ~.&I C/~.. ""Q ic ø ~. -~ :: ø U) c: ::
More information