MINEX CATLOG PIESE DE SCHIMB

Size: px

Start display at page:

Download "MINEX CATLOG PIESE DE SCHIMB"

Caren Allison
5 years ago
Views:

1 CATLOG PIESE DE SCHIMB

Cleaning brush: (Valid for all the serial numbers) 33.0000.

1002.000 CONTRAGREUTATE FEEDER MX Graphite colour Dispenser: (Valid for

000 DISPENSER FEEDER MX Graphite colour feeder ramp: (Valid for all the

000 RAMPA FEEDER MX Support pivot: (For machines with serial number

2 Cleaning brush: (Valid for all the serial numbers) PERIE DE CURATARE MX Graphite colour Feeder door: (Valid for all the serial numbers) USA FEEDER MX counterweight: (Valid for all the serial numbers) CONTRAGREUTATE FEEDER MX Graphite colour Dispenser: (Valid for all the serial numbers) DISPENSER FEEDER MX Graphite colour feeder ramp: (Valid for all the serial numbers) RAMPA FEEDER MX Support pivot: (For machines with serial number previous to ) SUPORT PIVOT MX Support pivot V 2.0: (For machines with serial number subsequent to ) SUPORT PIVOT 2.0 MX Front cover: (Valid for all the serial numbers) CAPAC FRONTAL Pag. 2-12

MX Graphite colour Juice tray: (For machines with serial number previous to 391809) 33.1007.

000 TAVA ANTI-SCURGERE MX Upper plastic pressing unit: (Valid for all the serial numbers) 33.

000 SUPORT PIVOT MX Support pivot shaft + DIN 6798A Washer + DIN 934 Nut + DIN 127 Washer:

references 33.1016.100 (current support pivot shaft) + 33.1005.

machines with serial number subsequent to 333375) 33.1016.100 SUPORT PIVOT 2.

(Valid for all the serial numbers) 33.1017.000 SUPORT ( BAZA) Mx V 2.

3 MX Graphite colour Juice tray: (For machines with serial number previous to ) REZERVOR SUC MX Graphite colour drip tray: (Valid for all the serial numbers) TAVA ANTI-SCURGERE MX Upper plastic pressing unit: (Valid for all the serial numbers) TAMBUR SUPERIOR SUPORT PIVOT MX Support pivot shaft + DIN 6798A Washer + DIN 934 Nut + DIN 127 Washer: (For machines with serial number previous to ) ** Until finish the stock - Alternative references (current support pivot shaft) (current support pivot) MX Support pivot shaft + DIN 439 MF Nut + DIN 127 Washer: (For machines with serial number subsequent to ) SUPORT PIVOT 2.0 Mx cover base + Mx feet (4units) + Din 934 Nut (4units) + GPN 300 Plastic Plug (4units): (Valid for all the serial numbers) SUPORT ( BAZA) Mx V 2.0 Silicone faucet O-ring: (For machines with serial number previous to ) VALVA MX motor reducer + Connection female (2units) + Connector pin: (Valid for all the serial numbers) REDUCTOR MOTOR Pag. 3-12

for machines with serial number previous to 417579) PLACA DE BAZA 100 CU FILTRU Mx Main board + Plastic bridle + Filter + ESP Screw

machines with serial number between 391808 and 417578, removing the filter 33.1074.000.

numbers) 33.1026.000 DRIVER DISPENSER 33.1027.

s (2units) + MX Spacer + Weight adhesive: (For serial numbers previous to 391809, in serial numbers previous to 333374 use the

4 PLACA DE BAZA Mx Main board + Plastic bridle + ESP Screw Heyco (2units) + DIN 912 Screw + DIN 985 Nut + DIN 6798A Washer: (Valid for machines with serial number previous to ) PLACA DE BAZA CU FILTRU Mx Main board + Plastic bridle + Filter + ESP Screw Heyco (2units) + DIN 912 Screw + DIN 985 Nut + DIN 6798A Washer: (For machines with serial number subsequent to ) * Valid for machines with serial number between and , removing the filter MX inner drive + Mx extern drive + spring drive + DIN 934 nut + DIN 125 Washer + Silicone joint (2units): (Valid for all the serial numbers) DRIVER DISPENSER ROTOR LAMA Rotor shaft + Screw DIN Washer DIN O-ring + Seal washer + Bearing RS s.s (2units) + MX Spacer + Weight adhesive: (For serial numbers previous to , in serial numbers previous to use the reference ) MX Weight + Weight adhesive: (For machines with serial number previous to ) GREUTATE MX Belt weight: (For machines with serial number previous to ) CENTURA CONTRA-GREUTATE Mx Rocker arm belt: (Valid for all the serial numbers) CENTURA BALANS MX Rocker arm + Washer DIN RFX 81T screw: (For machines with serial number previous to ) BRAT BALANS Pag. 4-12

MX Rocker arm + Washer DIN 125 + RFX 81T screw: (Valid for all the serial numbers) 33.1030.

000 CARCASA LAMA CUTIT MX Graphite colour Fix blade bracket + Screws DIN 7981 B (3units): (For machines with serial number previous to 333374 use the

000 MODUL PLASTIC Frame + Door shaft (2units) + S.S front + Peel ejec.

set + Wire guide tube: (For serial numbers previous to 391809) Spare part sold with identification label and on request.

set + Wire guide tube + Specific grease: (Serial numbers subsequent to 391809) Spare part sold with identification label and on request.

5 MX Rocker arm + Washer DIN RFX 81T screw: (Valid for all the serial numbers) BRAT BALANS MX Graphite colour Bracket: (Valid for all the serial numbers) BLOCAJ CAPAC FRONTAL CARCASA LAMA CUTIT MX Graphite colour Fix blade bracket + Screws DIN 7981 B (3units): (For machines with serial number previous to use the alternative reference ) MX Keyboard module + Keyboard Bus: (Valid for all the serial numbers) MODUL TASTAURA MODUL PLASTIC Frame + Door shaft (2units) + S.S front + Peel ejec. pivot holder (2units) + Expander (12units) + Fix blade bracket + DIN 7981 Screw (3units) + Wire fastener + RFX 81T Screw (2units) + Wire feeder arm set + Wire guide tube: (For serial numbers previous to ) Spare part sold with identification label and on request. INDISPENSABLE SEND THE SERIAL NUMBER MODUL PLASTIC (SPRING) Frame + Door shaft (2units) + S.S front + Peel ejec. pivot holder (2units) + Expander (12units) + Fix blade bracket + DIN 7981 Screw (3units) + Wire fastener + RFX 81T Screw (2units) + Wire feeder arm set + Wire guide tube + Specific grease: (Serial numbers subsequent to ) Spare part sold with identification label and on request. INDISPENSABLE SEND THE SERIAL NUMBER MX Blade blockage: (For machines with serial number subsequent to ) BLOCAJ CUTIT MX Stainless Steel twirler blade: (For machines with serial number subsequent to ) LAMA CUTIT Pag. 5-12

for machines with serial number subsequent to 333377) MX Silicone shaft fastener

1044.000 KIT CUTIT MX Twirler blade holder + Stainless steel twirler blade + MX

update machines until serial number 333374) MX Faucet push + Push spring + Graphite

(3units) + Silicone joint (3units) + RFX 81T Screw (3units): (Valid for all the serial

6 SUPORT LAMA CUTIT MX Twirler blade holder: (For machines with serial number subsequent to ) KIT BLOCAJ MX Plastic cover lock + Lock base + RFX 81T Screw (2units): (Suitable for machines with serial number subsequent to ) MX Silicone shaft fastener (2units): (Valid for all the serial numbers) GARNITURI SILICON (2uts) KIT CUTIT MX Twirler blade holder + Stainless steel twirler blade + MX Graphite colour Fix blade bracket + Blade blockage + Kit twirler blade rotor shaft: (To update machines until serial number ) MX Faucet push + Push spring + Graphite colour Faucet piston + Silicone O-ring: (For machines with serial number previous to ) ROBINET CARCASA TASTATURA MX Keyboard cover + ON/OF Button + O-ring thread + DIN 125 Washer (3units) + Silicone joint (3units) + RFX 81T Screw (3units): (Valid for all the serial numbers) FIR FEEDER SI BRAT BALANS MX Stainless Steel Wire + Setscrew + Plastic cover + Silicone joint (2units) + DIN 934 Nut (2units) + Retaining wire sheet + RFX 81T Screw (2units): (Valid for all the serial numbers) MX Gear levy: (Valid for all the serial numbers) CUPLAJ Pag. 6-12

33.1049.000 MODUL DE POZITIE MX Position module + Position module bus: (Valid for all the serial numbers) 33.1050.

101 FISA BARIERA FEEDER Barrier board-power board BUS MX: (For machines with serial number subsequent to 391809) MX Graphite colour Rear cover: (Valid for all the

000 FISA ALIMENTARE CONTROL Main board to Keyboard module bus: (Valid for machines with serial number subsequent to 342019) 33.1053.

7 MODUL DE POZITIE MX Position module + Position module bus: (Valid for all the serial numbers) MODUL BARIERA FEEDER MX Feeder barrier module + Feeder barrier module bus: (For machines with serial number previous to ) FISA BARIERA FEEDER Barrier board-power board BUS MX: (For machines with serial number subsequent to ) MX Graphite colour Rear cover: (Valid for all the serial numbers) CARCASA SPATE FISA ALIMENTARE CONTROL Main board to Keyboard module bus: (Valid for machines with serial number subsequent to ) FISA ALIMENTARE BARIERA FEEDER Main board to Feeder barrier module bus: (Valid for machines with serial number subsequent to ) FISA ALIMENTARE POZITIE Main board to Position module bus: (Valid for machines with serial number subsequent to ) MX Secudity micro-switch + Pin fast-on: (Valid for all the serial numbers) MICRO - INTRERUPATOR DE SIGURANTA Pag. 7-12

MX Double magnetic detector + Silicone joint + DIN 934 Nylon nut: (Valid

000 SENZOR COS COJI Mx Twirler blade rotor + DIN 7985 + DIN 125 Washer:

000 ROTOR IEC Socket base + Fuse (2units) + Bridge wire (2units): (Valid

000 CARCASA PRIZA IEC MX Juice container filter: (Assembled in machines

numbers. 33.1062.000 SITA REZERVOR SUC 2.0 33.1063.000 REZERVOR SUC 2.

0 Juice container: (For machines with serial number subsequent to 391809

and valid to update machines with serial number subsequent to 382339)

8 MX Double magnetic detector + Silicone joint + DIN 934 Nylon nut: (Valid for all the serial numbers) SENZOR COS COJI Mx Twirler blade rotor + DIN DIN 125 Washer: (Valid for all the serial numbers) ROTOR IEC Socket base + Fuse (2units) + Bridge wire (2units): (Valid for all the serial numbers) CARCASA PRIZA IEC MX Juice container filter: (Assembled in machines with serial number subsequent to and valid for all the serial numbers SITA REZERVOR SUC REZERVOR SUC 2.0 MX V 3.0 Juice container: (For machines with serial number subsequent to and valid to update machines with serial number subsequent to ) ROBINET 2.0 Mx V 3.0 Faucet with joint: (For machines with serial number subsequent to and valid to update machines with serial number subsequent to ) Round jar + Rotor shaft specific grease: (For machines with serial number subsequent to ) VASELINA ROTOR SIGILIU ROBINET 2.0 V 3.0 Juice in-out joint: (For machines with serial number subsequent to and valid to update machines with serial number subsequent to ) Pag. 8-12

Washer: (For machines with serial number subsequent to 391809) 33.1068.000 AX ROTOR 2.

S (2units) + MX Bearings spacer + Rotor Shaft specific grease: (For machines with

000 KIT PRESARE ASP Upper presing unit + ASP Lower presing unit + Support pivot +

S Twirler blade + ASP Left peel ejector + Securing knob (2units) + Silicone joint

case mounting tool (2units): (This tool is used to facilitate the assembly of gear

000 KIT MONTARE MODUL POZITIE DIN 439 Nut + DIN 125 Washer + Cable guide + Mx Feeder

(2units): (For machines with serial number subsequent to 391809) MX Foot: (Valid for

9 ARC TENSIUNE 2.0 Rotor shaft spring + MX Belt bridle + MX weight belt + DIN 912 Screw + DIN 6798A Washer: (For machines with serial number subsequent to ) AX ROTOR 2.0 Rotor shaft MX V Screw DIN Washer DIN Bearing RS S.S (2units) + MX Bearings spacer + Rotor Shaft specific grease: (For machines with serial number subsequent to ) KIT PRESARE ASP Upper presing unit + ASP Lower presing unit + Support pivot + Blade block + Twirler blade holder + S.S Twirler blade + ASP Left peel ejector + Securing knob (2units) + Silicone joint (2units) + ASP Label: (For machines with serial number subsequent to ) MX Gear case mounting tool (2units): (This tool is used to facilitate the assembly of gear case and the fasteners in the frame) DISPOZITIV MONTARE CUPLAJ KIT MONTARE MODUL POZITIE DIN 439 Nut + DIN 125 Washer + Cable guide + Mx Feeder system Metallic PCB + DIN 6798 Washer + DIN 934 Nut (2units) + Din 7984 Screw (2units): (For machines with serial number subsequent to ) MX Foot: (Valid for all the serial numbers) SUPORT ( PICIOR ) Mx Schuko 90º Power supply cable: (Valid for all the serial numbers) CABLU ALIMENTARE Schuko 90º UL Power supply cable: (Valid for all the serial numbers) CABLU ALIMENTARE Pag. 9-12

Mx Schuko 90º GB Power supply cable: (Valid for all the serial numbers) 33.1073.

300 CABLU ALIMENTARE AUS Mx Main board wires and filter: (Valid for machines with serial numbers previous to 417579) 33.

Ring E30 DIN 471 (2units) + Sec. Ring E35 DIN 471 (2units) + 6007 Bea.

+ DIN 125 Washer (4units) + DIN 127 Washer (4units) + DIN 912 Screw (4units) + Box cover + Heyco Scr.

000 KIT RULMENTI Bearing 6007 2RS (2units) + MX eight support + DIN 471 E-35 seg ring (2units) + DIN 471 E-30 seg ring

10 Mx Schuko 90º GB Power supply cable: (Valid for all the serial numbers) CABLU ALIMENTARE GB Schuko 90º AUS Power supply cable: (Valid for all the serial numbers) CABLU ALIMENTARE AUS Mx Main board wires and filter: (Valid for machines with serial numbers previous to ) FILTRU PLACA DE BAZA GRUPAJ MOTOR Gear case + Motor + DIN 912 Scr. (3units) + Sec. Ring E30 DIN 471 (2units) + Sec. Ring E35 DIN 471 (2units) Bea. (2units) + Big gear + Small gear + Gear levy Bea. 2RS (2units) + Lower shaft + Upper shaft + Eight reinforc. + DIN 125 Washer (4units) + DIN 127 Washer (4units) + DIN 912 Screw (4units) + Box cover + Heyco Scr. (4units): (Valid for all the serial numbers) KIT RULMENTI Bearing RS (2units) + MX eight support + DIN 471 E-35 seg ring (2units) + DIN 471 E-30 seg ring (2units) RS Bearings (2units): (Valid for all the serial numbers) Mx Big plastic gear: (Valid for all the serial numbers) ROATA DINTATA MARE Mx small plastic gear: (Valid for all the serial numbers) ROATA DINTATA MICA Mx Lower plastic pressing unit: (Valid for all the serial numbers) TAMBUR SUPERIOR Pag

Left peel ejector: (Valid for all the serial numbers) 33.1081.

000 SURUB TAMBUR CU GARNITURA Securing knob (2units) + Silicone joint

(2units): (Valid for all the serial numbers) 33.1083.000 PIVOT EXTRACTOR 33.

(4units) + Mx Black SNAPCAP PLUG (4units) + Expansible thread DRR011

(Valid for all the serial numbers) 33.1084.

11 Left peel ejector: (Valid for all the serial numbers) EXTRACTOR COJI STANGA SURUB TAMBUR CU GARNITURA Securing knob (2units) + Silicone joint (2units): (Valid for all the serial numbers) Peel ejector pivot holder (2units): (Valid for all the serial numbers) PIVOT EXTRACTOR SET SURUB GANITURA Mx SNACAP Washer (4units) + DIN 7991 Screw (4units) + Mx Black SNAPCAP PLUG (4units) + Expansible thread DRR011 (2units): (Valid for all the serial numbers) Heyco Expander (12units): (Valid for all the serial numbers) DISPOZITIV CAPAC FRONTAL MX B Hinge + Mx A Hinge: (Valid for all the serial numbers) BALAMALE PLASTIC Mx upper pressing shaft + Bolt 10 x 8 x 25: (Valid for all the serial numbers) AX TAMBUR SUPERIOR Mx lower pressing shaft + Bolt 10 x 8 x 25: (Valid for all the serial numbers) AX TAMBUR INFERIOR Pag

(11units): (For machines with serial number previous to 391809) 100 CARCASA

machines with serial number subsecuent to 391809) Mx door shaft (2units):

000 AX CAPAC FONTAL Mx paralel bolt: (For machines with serial number

000 BLOCAJ - DREPT Mx disc bolt: (For machines with serial number subsecuent

100 BLOCAJ - DISC MX Electronic box cover + Esp HEYCO Screw (4units): (For

12 CARCASA FRONTALA INOX Mx weight inox front + Mx expansible thread heyco (11units): (For machines with serial number previous to ) CARCASA INOX Mx spring inox front + Mx expansible thread heyco (11units): (For machines with serial number subsecuent to ) Mx door shaft (2units): (Valid for all the serial numbers) AX CAPAC FONTAL Mx paralel bolt: (For machines with serial number previous to ) BLOCAJ - DREPT Mx disc bolt: (For machines with serial number subsecuent to ) BLOCAJ - DISC MX Electronic box cover + Esp HEYCO Screw (4units): (For machines with serial number subsequent to , or with the gearbox reference installed) CARCASA PANOU CONTROL CARCASA ORANGE Jar MX Orange + Peel bucket MX Orange: (Valid for all the serial numbers) ** For the rest of colours check the accessories catalogue Pag

SPARE PARTS CATALOGUE 2012

SPARE PARTS CATALOGUE 2012 MX Foot (Valid for all the serial 32.1025.000 PEEL BUCKET FEET MULTIFRUIT- Left peel ejector (Valid for all the serial 33.0002.000 LEFT PEEL EJECTOR (PIVOTS) 33.0006.000 PEEL EJECTORS PIVOT HOLDERS Peel