Right rotation. Left rotation
|
|
- Harold Manning
- 5 years ago
- Views:
Transcription
1 HAND AUGER 35 to 150 mm CONTINUOUS FLIGHT AUGERS HAND AUGER Thread - auger 22 conical 20/27 Square rod 23 Square rod F F F F F F F F F F F AUGER FOR PRESSUREMETER DRILLINGS Right rotation 63 mm Core Auger 1,00 m length F ,50 m length F Left rotation 63 mm Core Auger 1,00 m length F ,50 m length F CONTINUOUS FLIGHT AUGER 63 MM TO 254 MM HANDLE FOR HAND AUGER auger bit Core and hole 1,00 m length 1,50 m length Rod type F F F F Rod F injection Rod F /27 Rod F Square rod F Square rod F F F F F F F F F F F F F F F F F F F F F CORE D 66 EXTENSION ROD FOR HAND AUGER Can be used for the implementation of pressumeter probe 1 m extension rod 22 conical M/F (marked every 10 cm)* F conical M/F ( marked every 10 cm)* hollow F /27 with nipple F x 23 square rod F x 33 square rod F Screwing and hoisting wrench for 22mm rods F F F F F F F Other lengths available, please consult us. Our augers are steel hardened U-PIN 21 F F F F LENGTH 67
2 BITS AND ACCESSORIES BITS AND ACCESSORIES 2 WINGS BIT BULLDOG BIT Right rotation Left rotation references references F F F (with pilot) -> (Ref. Pilot = IB ) F F F F F F TC inserts F FINGER BIT F * * 127 F F * 152 F F * 178 * F * 203 * F F * F F * F F Finger with carbide insert F Finger with head single type F Finger with head double type F Simple finger head Small size F Double finger head Small size F Double finger head Large size F *Please, consult us DP ROCK BIT BULLET BIT F F F F F F F F F F F F F Small size inserts F Large size inserts F
3 BITS AND ACCESSORIES BITS AND ACCESSORIES FISHTAIL BIT AUGER HOLDER Auger Auger 64 F F F F F F F F /100/114 F F /152 F F F F F F SHANK FOR FISHTAIL BIT Fishtail F F F F à F à F à F U-PIN 21 F F F F CARDAN JOINT 400 dan.m F x F 41 AUGER FISHING DEVICE 2 3/8 R F /8 IF F Auger Right rotation Left rotation reference reference 63 F F /100/114 F * 140/152 F * *Please, consult us 41 hex F hex F hex F Other couplings (R51, R66), please contact us Pointed hammer for U Pins F
4 HOLLOW STEM AUGERS HOLLOW STEM AUGERS PRINCIPLE The hollow-stem auger (HSA) system is used to drill and case a borehole simultaneously in gravelly or heterogeneous soil such as sand or gravel. The principle of this method is to use a string of rods with a pilot bit inside the auger string. The hollow-stem auger can also be positioned using lost tools instead of internal rods. Soil should not enter the auger regardless of the method used. This is an ideal method for piezometer installation, well monitoring, geotechnics, micro-piles, tubing for SPT tests and pressuremeter tests. In a standard configuration (auger+rod), when the desired depth is reached, the inner rods are removed to free the inside of the auger. Coring or sampling is subsequently possible beyond this depth. We offer a range of four standard dimensions identified by their inside and outside diameters: (ø inside x ø outside) 66 x 140 mm 82 x 175 mm 111 x 194 mm 159 x 254 mm COMPOSITION OF THE SYSTEM Designation Dimensions in mm ( inside x outside) 66 x x x x Driving head F F F F Rod bolt * * * * 3 Rod x head adapter F F F F Auger locking bolt F F F F Hollow auger 1,5 m long F F F F Rod 60 x 1.5m K K K Rod 76 x 2 3/8 Reg x 1.5m K Plug adapter for pilot bit F F F F Heavy duty cutter head bit F F F F Pilot bit Drag bit ø63,5 mm Drag bit ø76 mm Drag bit ø108 mm Drag bit ø156 mm ID I I I Plug adapter for pilot bit * * * * 11 Finger bit * * * * DESCRIPTION The top of the equipment consists of a dual head leading both the auger string and the inner rod string. The augers are fixed to the driving head with nuts and bolts, whilst the top rod is fixed to the head using an adapter secured with a locking pin. The augers and inner rods are added in 1.5 m lengths (or others lengths on request) until the target drilling depth is reached. The rods are threaded and screwed, whilst the augers are secured using nuts and bolts. The first (bottom) rod is equipped with a plug adapter connecting the rod to the pilot bit. The bottom auger is fitted with a tungsten carbide cutter head bit including both self-sharpening bullets for chipping action and blades for cleaning. When the inner rods are removed, the stem of the auger is completely emptied to its full inner diameter. Left in hole bit (Option) F F F F ACCESSORIES Hoisting plug F F F F Auger holder F F F F Auger retriever F F F F *Please, consult us
5 INJECTION AUGERS «JET AUGER» TYPE RODS AND NIPPLES FOR TOP HAMMER ROTARY-PERCUSSION INJECTION AUGER Length 1.5 m Thread type 63 E F AWJ F F /8 Reg F /8 Reg F /8 Reg F Other diameters and lengths : please, consult us APAGEO offers a full range of rods, bits, shanks, adaptors and couplings for top hammer rotary percussion. We have a large storage of material to meet your needs. Other threads can be manufactured: ask us for rods and bits in R22, R25, T38, T45 and T51. RODS Rod length R 32 rod R 38 rod 0.60 m H H m H H m H H D 1.52 m H H m H H WINGS BIT FOR INJECTION AUGER auger bit Thread E F Other diameters : please, consult us LENGTH 2.43 m H H m H H Nipple H H Wrench H H Fishing tool bell type M M Rod M x F on demand ADAPTOR AND COUPLING R38 Fem R38 Male R32 Fem H H R32 Male H H DP ROCK BIT auger bit Thread AWJ F F "3/8 Reg F "3/8 Reg F "3/8 Reg F Small size inserts F Large size inserts F Other bits for injection augers : please, consult us p.21 For cement grout injection, please consult our piston pumps. SPECIAL RODS AND SHANK Designation R38 M x M Rod guide ø60 mm lg 910 mm (Stabilisor for pressuremeter tests) H R38 F x F wing guide sleeve ø60 mm - lg 190 mm H Shank for APAFOR 48 / 51 - R38 U Shank BBC 100 R32 side inj. H Shank BBC 120 R32 central inj. H Shank for Sed 350 U
INSTRUCTIONS FOR USING THE AUGERS
INSTRUCTIONS FOR USING THE AUGERS CONCERNED TO IMPROVE OUR PRODUCTS AND THE SAFETY OF PEOPLE, WE GIVE YOU SOME ADVICE AND RECOMMENDATIONS ON HOW TO USE THE AUGER. // DRILLING AND CORING TOOLS, ACCESSORIES
More informationCONTINUOUS FLIGHT AUGERS AND BITS
Mobile Standard Construction and HEX-COR augers have been tested in the field and independently tested in the laboratory and are proven to be equal to or stronger than any other auger in the industry.
More informationCONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
More informationP.12 P.23 P.24 P.26 DRILLING RIGS AND ACCESSORIES
DRILLING RIGS AND ACCESSORIES P.12 HEAVY DYNAMIC PENETROMETER AND DRILLING RIGS APAFOR APAFOR 50 APAFOR 100 APAFOR 200 APAFOR 220 APAFOR 330 AND 340 APAFOR 430 APAFOR 450 RS APAFOR 450 APAFOR 550 AND 560
More informationDando Drilling International
Dando Drilling International Dando Terrier and Tooling The Dando Terrier drilling rig has been designed specifically for sampling and testing for geotechnical and environmental analysis. The rig is crawler
More informationAdvanced Foundation Technology and Equipment
Advanced Foundation Technology and Equipment Tel. 0039 0421 325077-8 - Fax 0039 0421 325079 e-mail: ncb1@dacos.it URL: www.ncbinternational.net FOUNDATION EQUIPMENT Pile & Micro-Pile Hydraulic Rotary Rigs
More informationIntroduction Augers. Inclinometer Casing. Subs & Pipe Wrenches. Samplers. Hoisting, Lowering, Hammers & Rockbits. Corebarrels, Drill Rods & Casings
Contents Introduction Augers Inclinometer Casing Subs & Pipe Wrenches Samplers Hoisting, Lowering, Hammers & Rockbits Corebarrels, Drill Rods & Casings Diamond Products Thin Wall Bits & Saw Blades Water
More informationEN TRA ENGINEERING AND TRADING SRL
Foundation Equipment Grabs for diaphragm wall and piling Hydraulic Casing oscillators Power Packs Casing joints Stop-end pipes Water stop elements Hydraulic extractors Piling tools and accessories MADE
More informationContinuous Sampling OVERSHOT STYLE ROD STYLE SWIVEL OVERSHOT ASSEMBLY CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY
ROD STYLE OVERSHOT STYLE OVERSHOT ASSEMBLY SWIVEL CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY SAMPLE BARREL SPLIT OR SOLID SHOE Split Barrel Sampler Assemblies Continuous
More informationOverburden drilling catalogue
Atlas Copco Ground Engineering Products Overburden catalogue Symmetrix overburden systems Overburden Drilling Catalogue Atlas Copco Overburden Drilling System... 3 The Symmetrix System... 4 Drilling overburden...
More informationSoil Investigation Tools Catalogue
Soil Investigation Tools Catalogue 2012 KUVAWALA CORE DRILL EQPT. PVT. LTD. QUALITY RUNS DEEP www.kuvawalacoredrill.com INDEX TUNGSTEN CARBIDE BITS DRILL RODS SOIL SAMPLING CORE BARRELS SPLIT TUBE SAMPLER
More informationSupAnchor Rock Reinforcement Strategy Self-drilling hollow anchor systems
SupAnchor Rock Reinforcement Strategy Self-drilling hollow anchor systems The SupAnchor Self-Drilling Hollow Anchor is a unique anchoring system and is today s answer to the increasing demands of the tunnelling
More informationD-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone:
Power Source: Gasoline or Diesel Engine Maximum Gross Spindle Torque: 2320 ft. lbs. (3145 Nm) to 3066 ft. lbs. (4156 Nm) Spindle Bore: 2-3/8 (60mm) Spindle Travel: 66 (1,676mm) Spindle & Retract Force
More informationEXCAVATOR AUGERS. FOR USE ON THE FOLLOWING CARRIES Excavators
FOR USE ON THE FOLLOWING CARRIES Excavators PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited for your project. The above triangles and color
More informationAUGER BORING PRODUCT TOOLING
AUGER BORING PRODUCT TOOLING AND ACCESSORIES American Augers History American Augers has a long history in the Industry. Starting in 1970 with the first American Augers' auger boring machine built by Leo
More informationTOP HAMMER DRILLING TOOLS. Percussive Products
TOP HAMMER DRILLING TOOLS Percussive Products 2 TABLE OF CONTENTS HARD ROCK TOOLING OVERVIEW 5 Bit Types 6 Bit Face Designs 8 Button Types 9 Blade Bit Designs 10 Reaming Tooling Designs 11 Rod Types 12
More informationThe drilling- and sounding rig RSB 0/ 1.4 is suitable für soil investigation according to DIN 4021 table 3, sub 1 and 2 as listed below: I:] I:J
The drilling- and sounding rig RSB 0/ 1.4 is suitable für soil investigation according to DIN 4021 table 3, sub 1 and 2 as listed below: I:] I:J Soil sampling for soil mechanics, investigating construction
More information44. Bit record form Rig site daily drilling report form Office drilling report Computerized drilling information network
Figures v Tables vii Foreword ix Acknowledgments xi Units of Measurement xii Introduction 1 Well Planning 5 Bits 9 Bit Selection 9 Bit Design 11 How Bits Drill 12 Roller Cone Bits 13 Natural Diamond Bits
More informationRECOMMENDED PROCEDURE FOR INSTALLATION OF DRILLCO MAXI-BOLT ANCHORS
RECOMMENDED PROCEDURE FOR INSTALLATION OF DRILLCO MAXI-BOLT ANCHORS Revision 0588VO By Drillco National Group P. O. Box 2182 Long Island City, NY 11102 Telephone: (800) 391-0052 www.drillcogroup.com techsupport@drillcogroup.com
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationOvershots. Drill Rods. Casing. Tools 12/06-MKT1644 P/N M
REV 0-DEC-06 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Diamond Products Impregnated Bits Reaming
More informationSan Antonio, Texas 78222
1.01 3 EA Pump Removal $1,125.00 $3,375.00 1.02 3 EA Pump Installation $1,200.00 $3,600.00 1.03 1 EA Downhole Video Survey $2,000.00 $2,000.00 1.04 1 EA Geophysical Logging $2,500.00 $2,500.00 2.01 50
More informationATV ROTA-SONIC DRILL RIG (LS600)
ATV ROTA-SONIC DRILL RIG (LS600) TECHNICAL DATA SHEET GENERAL DESCRIPTION The GeoSonic Large Sonic (also known as the LS600 ATV) is a self-contained drill rig especially designed for sonic drilling through
More informationAUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers
AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers The McMillen Auger Drives by Paladin, feature a wide variety
More informationThe most complete line of drilling rigs...
PRODUCTS RANGE The most complete line of drilling rigs... MAIT, a world leader with more than 50 years experience in manufacturing hydraulic drilling rigs, presents its wide range of machines able to satisfy
More informationPIPE HANDLING & HOISTING. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
PIPE HANDLING & HOISTING MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com PIPE HANDLING & HOISTING TABLE OF CONTENTS PIPE HANDLING & HOISTING OVERVIEW... HOISTING PLUGS...-7
More informationBoiler Tube Cleaners Tube Cleaners for Straight Tubes
Tube Cleaners for Straight Tubes 1/2" to 1-3/8" (12.7 to 34.9 mm) I.D. Range: 1/2 in. (12.7 mm) - 1-3/8 in. (34.9 mm) Deposit: heavy-medium to soft Midget Motor with optional heads shaft wrench; metal
More informationGrout pumps and dosing systems - for grouting with 2 components
Grout pumps Grout pumps and dosing systems - for grouting with 2 components Type LP 20-20/3 LP 20-20/PA Electric drive 220 V/ 50 Hz lighting current Option Electric drive 400 V/ 50 Hz three-phase current
More informationThere s no better choice
There s no better choice Well known as the original source of the In-Line Drive Design, Premier Auger has built the most reliable earth auger attachments for over 3 decades. With a complete and comprehensive
More informationUTILITY AUGERS. FOR USE ON THE FOLLOWING CARRIES Mini Digger Derricks, Digger Derricks and Pressure Diggers
FOR USE ON THE FOLLOWING CARRIES Mini Digger Derricks, Digger Derricks and Pressure Diggers PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationInternal Pressure Pipe Cutters. Manual E540
Internal Pressure Pipe Cutters Manual E540 Contents Logan Internal Pressure Pipe Cutters Overview...2 Uses...2 Construction...2 Tool Illustration...3 Operation...2 Single Cut from a Fixed Platform... 2
More informationDIAGER CONTENTS DIAGER. Masonry Drill Sets...13 Chisels...14 Chisel Selection Guide...15 Diager Technical Section
Diager products have been manufactured in France for over 55 years. Diager manufacture an extensive range of premium high end tungsten carbide, masonry cutting tools for the Construction Industry. CONTENTS
More informationH o l l o w S t e m A u g e r E q u i p m e n t
H o l l o w S t e m A u g e r E q u i p m e n t Pitcher Drilling s hollow stem auger rigs are used to collect soil samples and to construct/destruct monitoring or recovery wells. TRUCK AND TRACK MOUNTED
More informationBosch: Focusing on progress.
Bosch: Focusing on progress. The concrete and masonry range. Hammer and stone drilling, chiselling 2 Overview Bosch Accessories Accessory range Overview Innovative and efficient products ensure successful
More informationAUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers
AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers The McMillen Auger Drives by Paladin, feature a wide variety
More informationThe MRZB. Carl Hamm Sampling System. Soil Water Air
Sounding Equipment Carl Hamm Sampling System The Carl Hamm Sampling System consists different Probing Systems with the help of Hollow steel rods are beaten or pressed into the ground. It enables a cost-effective
More informationTHECUTTIN MASONRY 42 SDS PLUS BULK 10 PACKS 42 SDS PLUS SETS PAGE
THECUTTIN MASONRY PAGE 42 SDS PLUS BULK 10 PACKS 42 SDS PLUS SETS 34 Alpha_PG_09.pdf 34 23/12/08 11:01:35 AM GEDGE PAGE 36 MASONRY DRILL BITS 38 COUNTERSINK DEPTH GAUGE 39 UNIDRE MASONRY STRAIGHT 39 UNIDRE
More informationAtlas Copco Geotechnical Engineering Products. Pipe roofing solutions
Atlas Copco Geotechnical Engineering Products Pipe roofing solutions Pipe roofing solutions pre-support in tunnel constructions Cities and urban areas around the world are continuously being modernized
More informationSpare Parts Manual. Single Screw Extruder BASF. Spare Parts Manual BASF rev
Spare Parts Manual Single Screw Extruder BASF Spare Parts Manual BASF rev 09--08 Contents Screw Elements... Barrel assemblies...8 Clamps... Barrel end section... 5 Cutter...5 6 Shaft...9 7 Control Arm...
More informationHydraulic-Type Grease Fittings SAE
SAE J-534 Hydraulic-Type Grease Nipples Type SH1N - The standard head-ø is 6.6 (+/- 0.3) mm / 0.26" (+/- 0.012"). - standard versions according to SAE are made of steel, case-hardened, zinc-plated and
More informationSurface drilling rig. Explorac R50 on truck. Atlas Copco Exploration Products. Features
Atlas Copco Exploration Products Surface drilling rig Explorac R50 on truck It is a robust and reliable drill unit, making it ideal for remote areas. It is designed to perform an outstanding base platform
More informationSteel Accessories for hand held demolition tools
Steel Accessories for hand held demolition tools Steel Accessories for pneumatic, hand held hydraulic, gas powered and electric demolition tools The steel accessories in this catalog are intended for use
More informationFull Flow Reverse Circulation Junk Baskets. Manual B320
Full Flow Reverse Circulation Junk Baskets Manual B320 CONTENTS Logan Full Flow Reverse Circulation Junk Basket Overview... 2 Uses... 2 Construction... 2 Tool Illustration... 3 Operation... 4 Recovering
More informationMOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October
More informationDrill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated Bits
More informationMining and Quarrying. Mining and Quarrying
History 1948 Halifax Tool Co founded to manufacture T/C & masons tools. 1951 Halco developed the first DTH (down-the-hole) hammer. 100 psi. 1953 Halco DTH drill rigs introduced. 1983 Valveless high pressure
More informationCustomer Service Plastics & Composites. Nailembedded Nonferrous. Stainless. Drywall / Plaster. Cement Abrasives. Tile & Wood BEST BETTER
Hole Saws Hole Saw SELECTION GUIDE GOOD BETTER BEST Wood 2 Nailembedded wood Nonferrous METAL Plastics & Composites CARBIDE GRIT CARBIDE TIPPED BI-METAL CARBIDE GRIT Metal Stainless Steel Drywall / Plaster
More information"STAR-M" WOOD WORKING TOOLS - Japan
Produced from specially alloyed tool steel. Sharp and precisely hardened cutting edges for easy boring, cleaner holes and longer tool life. Designed for heavy-duty work. NO. S 6-1 Item No. Size O.L Twist
More informationUTILITY AUGERS. FOR USE ON THE FOLLOWING CARRIES Mini Digger Derricks, Digger Derricks and Pressure Diggers
FOR USE ON THE FOLLOWING CARRIES Mini Digger Derricks, Digger Derricks and Pressure Diggers PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited
More informationSpecializing in quality manufacturing of underground cable plow blades
840 McKinley St. Anoka, MN 0 Toll Free Customer Service: /800-28-2424 Specializing in quality manufacturing of underground cable plow blades Applications For: Cable TV Telephone Lines Irrigation Electric
More informationPDC Drill Bits. Drilling Equipment Made in Germany
PDC Drill Bits Drilling Equipment Made in Germany www.micon-drilling.de Phone +49. 51 44. 49 36 0 MICON-Drilling GmbH Im Nordfeld 14, 29336 Nienhagen, Germany www.micon-drilling.de Copyright 2016 MICON-Drilling.
More informationCasing Scraper. Service Equipment. Features
Casing Scraper The Casing Scraper is a spring type, mechanical casing scraper, featuring a large by-pass area between the blades to allow circulation of debris. The body is constructed of the highest quality
More informationdrill point and thru spindle coolant systems positive mechanical depth stop
SPACEMATIC SPACEMATIC ULTRALITE ULTRALITE Model 1000II Model 2000 TM TM DRILLING MACHINES Standard Features Optional Features ergonomic design air pressure intensifier for increased thrust consistent clamp
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationSTANDARD SERIES VALVE SEAT CUTTERS (for use with standard series pilots,.375" top)
PA R T S L I S T STANDARD SERIES VALVE SEAT S (for use with standard series pilots,.375" top) 28.6mm 1-1/8" 31.8mm 1-1/4" 35mm 1-3/8"! OF 15 3 250 243 30 3 250 278 30 3 253 299 30 x 45 3/3 250 274 45 3
More informationPRODUCT NEWS Q3 + Q4 2016
PRODUCT NEWS Q3 + Q4 2016 Carpenters square 33257 STACO Tømrervinkel 800 x 320 mm 5707345332579 1 In stock Power chisel 55579 STACO power chisel, 28 mm, SoftGrip handle w/metal blow bud 5707345555794 12
More informationMACH 303. Suitable for operation at air pressures of psi (7-24 bar). Drilling diameters of mm (3 3/8-4 ). Mach 303 Air Consumption
3 MACH 303 Mach 303 is a general purpose hammer for small hole drilling used in applications such as seismic, geological survey, micro-piling, floor, wall and roof-bolting or for blast-holes where environmental
More informationNote. Icons. Double Insulation. Variable Speed. Brake. Reversing. . New aesthetic design. Charger: . New aesthetic design. . Charging time: 60min
TOOL CATALOGUE 1 Index Cordless Driver Drill 1 MT070 1 MT90 3 Cordless Percussion Driver Drill 1 MT071 1 MT903 3 Cordless Impact Driver MT080 1 MT93 Drill MT081 1 MT9 Percussion Drill 3 MT191 5 MT961 3
More informationSide Feeds * 6RG * 12RG * 20RG * 4.5PE * 5.0PE * 30RG * 7RG * 8.0PE * 13RG * 5.7PE * 4.5RG * 8K * 9.7PE
Prices Effective May 15, 2008 * 6RG * 30RG * 8.0PE * 8K * 9.7PE Side Feeds * 12RG * 4.5PE * 7RG * 4.5RG * 20RG * 5.0PE * 13RG * 5.7PE 7015 Old Hwy 105 W. Conroe, TX 77304 Office (936) 588-3033 Fax (936)
More informationFeatures. HTHP Filter Press for Drilling Fluid Testing DRILLING FLUIDS EQUIPMENT
HTHP Filter Press for Drilling Fluid Testing DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion
More informationThere s no better choice than Premier.
There s no better choice than Premier. PREMIER POWER Premier Agricultural Attachments are designed to utilize the power of the host machine most efficiently, turning them into high performance work tools.
More informationFLX15 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO
Published: /0 FLX ROTARY CUTTERS S/N A00000 A0000 inclusive PARTS MANUAL Part No. A0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this
More informationDIAMOND HSS PRO GLASS & TILE HAMMER DRILL BITS ROTARY DRILL BITS METAL DRILL BITS WOOD DRILL BITS
110 MASONRY DRILLING A DRILL BIT FOR EVERY MATERIAL SPEEDHAMMER PLUS SPEEDHAMMER POWER SPEEDHAMMER MAX MASONRY GRANITE CORDLESS MULTI GLASS & TILE DIAMOND HSS PRO HSS COBALT HSS TIN TCT TURBOMAX STEP DRILL
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationDIY (Personal Use Only)
1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026
More informationMWD Components Ceramic & Carbide Parts MWD Electronics Running Gear Handling Equipment Drill Pipe Screens Float Valves Repair Kits Job Boxes Gamma
Float Valves Repair Kits Excellence in Energy Services for over years www.huntingplc.com Drilling drilling.tools@hunting-intl.com specialty.supply@hunting-intl.com www.hunting-intl.com/titan/contact-titan
More informationSOIL PENETROMETERS SOIL PENETROMETERS 8.1
8 8.1 TECNOTEST S RANGE OF PENETROMETERS Tecnotest manufactures a complete range of static, dynamic and static/dynamic penetrometers. The vast experience gained in this fi eld is placed at the disposal
More informationair pressure intensifier for increased thrust consistent clamp force min to max collet spacing ergonomic design
Formerly Hi-Shear Tooling Official Distributor: SPACEMATIC Wm. Lees & Sons Ltd. United Kingdom Telephone: +44 (0) 1698 426662 Email: sales@ Website: ULTRALITE TM DRILLING MACHINES Model 1000II Standard
More informationSide Cutter Kit (Left and Right - fits all 68", 72", 80" Buckets) 48" Pallet Fork
Side Cutter Kit (Left and Right - fits all 68", 72", 80" Buckets) These Bolt On Side Cutters (BOSC) greatly extend bucket service life and improve penetration power into hard packed soil or stock piled
More informationSALE PROPOSAL ROBBINS TBM UG1B-JAIPUR
SALE PROPOSAL ROBBINS TBM UG1B-JAIPUR INDEX Sl No Description Remarks 1 Index 2 Specification of TBM- Robbins 3 List of Rolling Stock attached to TBM & Other Equipments SPECIFICATION OF TBM ROBBINS f 6550
More informationTYPE CCH HYDRAULIC CASING CUTTER
Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, U.K. DD11 3RD Tel: +44 (0) 1241 877776. Fax: +44 (0) 1241 871037 E-mail: sales@pioneeroiltools.com Website: www.pioneeroiltools.com
More informationIMPLEMENTS FOR SUGAR CANE SACM-T
IMPLEMENTS FOR SUGAR CANE SACM-T Code: 05091303 Series: S-0507 Review: MAIO/2007 0909092783 0909092785 0909092779 0909092786 05114355 05054884 09090933 05054945 SACM-T MECANICO... 1 GEAR BOX... 2 1300/1400/1500
More informationQUALITY EXPERTISE COMMITMENT EXPERTISE YOU CAN DEPEND ON WWW.QUARRYMINING.COM USEFUL INFORMATION EXPERTISE. QUALITY. COMMITMENT. QUARRY MINING has been setting the industry standard for over 30 years in
More informationPARTS LIST. Clarke CRD1250 Rotary Hammer Drill. Part Number:
PARTS LIST Clarke CRD1250 Rotary Hammer Drill Part Number: - 6482015 Quantity Description Part Number 1 SLIDE CLIP ASSY GRCRD62029 1 CIRCLIP GRCRD62030 1 FRONT CAP ASSY GRCRD62031 1 CON.ROD ASSY GRCRD62070
More informationInstallation Instructions
Equipment Required: Installation Instructions Fastener Kit: F Wrenches: 8mm, 13mm, 3/4, 15/16 Drill Bits: 1/4 Other Tools: Drill, Reciprocating Saw, File WARNING: Under no circumstances do we recommend
More informationINDEX. BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation. STRONG POINTS 7 Basic Design Spares & Services
DREDGING PUMPS 2017 BELL PUMPS 4 Overview Characteristics Production Applications & Areas Of Operation STRONG POINTS 7 Basic Design Spares & Services BELL HEADS 10 Sand Production Head Flat Barge Bead
More informationExcavators. Mini/Midi
Mini/Midi Excavators Hitches 1 Buckets 2-6 Earth Drills 7 Breakers 8 Hand Held Tools 9-12 Compactors 12 Rock Wheel 13 Ripper Tooth 13 Selector Grabs 13 Mini/Midi Excavators Introduction Mini/Midi Excavators
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationSECTION VI PARTS LIST
SECTION VI PARTS LIST F19Qt Serial No. 3557 ~ & up Revised: January, 2010 Section VI - Page # 1 F19-K107-4 Section VI - Page # 2 PARTS BREAKDOWN PARTS LIST 001 KF19-10101 1 Cylinder 028 K264020-00026 2
More informationData sheet GT950 C Model. Code. Technical data. Optional. Attachments
Data sheet Model Code Technical data Engine Yanmar Cylinders/power 3 cylinder 49 HP diesel R.P.M 3000 Cooling water Tank autonomy 33 l Transmission 4 D Direct Drive Max. speed 25 km/h Transmission torque
More informationHAMMER DRILL BITS PROFESSIONAL WORK MEANS ECONOMICAL WORK HAMMER DRILL BITS. From Pros for Pros 9
PROFESSIONAL WORK MEANS ECONOMICAL WORK 251 SDS-plus MS5 TURBOHEAD Xpro 12 15 252 SDS-plus W2 TURBOKEIL X-Form 16 253 SDS-plus MS5 TURBOKEIL 17 20 255 SDS-plus MS5 VARIO 21 256 SDS-plus hammer drill bit
More informationNGWA Online Buyers Guide Listing Order Form
NGWA Online Buyers Guide Listing Order Form Our Online Buyer s Guide allows visitors to locate your business quickly and easily. Your Premier and Platinum listing will appear under the categories of your
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationNylon Fluid Regulators
Instruction Sheet P/N 08880B Introduction The FR- and RA- nylon fluid regulators are patented, electrically non-conductive, air-operated, pressure regulators. Except for the body shape and fluid connection
More informationHydraulic Pump. General description. Hydraulic circuit diagram
Hydraulic Pump SYSTEM 2 General description The hydraulically actuated grease pump BEKA HAMAX System 2 is mainly used to lubricate hydraulic hammers or other construction machinery accessories. Due to
More informationAuto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
More informationTHEHOLEADVANTAGE 2009PRODUCTGUIDE
THEHOLEADVANTAGE 2009PRODUCTGUIDE PANEL&RIVETSTUB&WIREJOBBERSPOTWELD DOUBLEENDEDPANELLONGSERIESSTEPSPEARPOINT SPADEMASONRYSDSHOLESAWSARBORSBROACH DRILLS&EJECTIONPINSINSERTPOWERDRYWALL DOUBLEENDEDPHILLIPS+SLOTDOUBLEENDED
More informationGLOBAL PRODUCT CATALOGUE. January 2009 PERCUSSIVE TOOLING. THIS PAGE LEFT INTENTIONALLY BLANK
GLOBAL PRODUCT CATALOGUE THIS PAGE LEFT INTENTIONALLY BLANK PERCUSSIVE TOOLING January 2009 www.boartlongyear.com TABLE OF CONTENTS About Our Products 4 SAFETY 7 Overview 11 SYSTEM Set-up 12 bits 15 rods
More informationSOILMEC FAR EAST PTE.LTD SOILMEC ARABIA LLC
Microdrilling Microdrilling EQUIPMENT / TECHNOLOGIES PSM-8 PSM-8B PSM-8G STM-8G SM-14 PSM-16G STM-16G MICROPILES ANCHORINGS JET GROUTING OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT
More informationREAL DEALS. 3,599 3,699 $ REAL TOOLS. REAL PROS. NEW! CHECK WITH YOUR LOCAL PLATT FOR EXCLUSIVE IN-STORE DEALS ON THESE DEWALT TOOLS!
REAL PROS. REAL TOOLS. REAL DEALS. 2-TOOL COMBO KIT 1/2" Hammerdrill 1/4" Impact Driver (2) 20V MAX* XR 5.0Ah Batteries #0052555 399 20V MAX* 2-TOOL COMBO KIT Threaded Rod Cutter 1/4" Impact Driver (2)
More informationPrice quote for: Aftermarket Tractor/Skidsteer Attachments
SEQ. #416-713 MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells JULY, 2013 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free
More informationMini/Midi Excavator Attachments Guide ATTACHMENTS
Mini/Midi Excavator Attachments Guide ATTACHMENTS Introduction Contents Our Range JCB s range of Mini/Midi Excavator equipment is expanding and so are the attachments to complement this range. JCB attachments
More informationIntroduction. PDC The Benefits. PDC Bits. PDC Reamers. DTH Bits. DTH Hole Openers. Drag Bits. Bit Repair
1 PRODUCT BROCHURE 2 Introduction 3 PDC The Benefits 5 PDC Bits 6 PDC Reamers 20 DTH Bits 22 DTH Hole Openers 24 25 Drag Bits Bit Repair 26 3 Infinity Tool Mfg manufacture an industry-leading line of down
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationGROUND HOG EARTH DRILLS GROUND HOG, C-71-5 I/C, less auger. GROUND HOG, COMBO AUGERS Works best in HARD, COMPACT soils
Ground Hog Augers GROUND HOG EARTH DRILLS GROUND HOG, C-71-5 I/C, less auger Engine Item# Price 5.5 HP Briggs & Stratton I/C 63300 1,375.50 5.5 HP Honda 63299 1,538.25 GROUND HOG, COMBO AUGERS Works best
More informationCatalogue. Mühlhäuser - Obermann GmbH. In den Dorfwiesen Michelstadt/Germany. Phone Fax
Catalogue Mühlhäuser - Obermann GmbH In den Dorfwiesen 23 64720 Michelstadt/Germany Phone +49 6061 7009 0 Fax +49 6061 7009 70 e-mail: info@obermann.com Product range/ contents Page Grout pumps and dosing
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E493 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 7 3 (E1) 1 2 3 4 501 502 48 11 12 13 14 15 24 25 26 30 31 32 25 5 6 16 17 18 19 27 28 33 34 35 7 8 20 29 21 9 22 10 23 36
More informationHDD ASSIST OVERCOMING DIFFICULT SITUATIONS
HDD ASSIST OVERCOMING DIFFICULT SITUATIONS Presented by: Venue: Amanda Kitchin Business Development Trenchless Technology UKSTT Roadshow Reading ABOUT US Mammoth Equipment Ltd and MTS Suction Systems UK
More informationMAGNETIC-STAND DRILLING MACHINES. profiline
MAGNETIC-STAND DRILLING MACHINES profiline Comparison of technical data RS4 - RS40e - The New RS GENERATION! RS20 / RSM20 Technical data RS4 RS5e RS10 RS20 RSM20 Mag. clamping force: 10.000 N 10.000 N
More information