Submersible Turbine Pumps
|
|
- Simon McKinney
- 5 years ago
- Views:
Transcription
1 Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water volume applications Cast iron motor bracket and discharge adapter 46 Stainless steel or chrome plated pump shaft Bronze or Buna-N bushings Cast Iron intermediate bowl with baked on porcelain lining Bronze or 34 Stainless steel impeller balanced to reduce vibration 46 Stainless steel collet with split taper for tight lock Bronze sand collar to protect motor from sand Bronze thrust collar protects from upthrust 46 Stainless steel inlet screen allows water in while keeping objects out 46 Stainless steel motor coupling will not corrode Stainless steel cable guard protects motor lead Standard cataloged items shown on pages 4 through 9. For custom pump quotes on non-cataloged items, see pages 2-3 NOTE: All cataloged and custom items ship within two business days of receipt of order.
2 Non-Cataloged Custom Build Program 5, 6, 7 & 8 Inch Turbine Pump Ends Submit complete information on job to F&W customer service for sizing Quote will include price, performance curves and submittal data. See sample on page 3. Pump ends sized and built based on requirements for each job Impellers trimmed to satisfy the specific requirements of each job Custom pumps will be built, tested and shipped within two business days of receipt of purchase order Motors and control panels available on request Request for Turbine Pump Quote to: Tech@flintandwalling.com or Fax to: Company Name Contact Name Phone Application Casing Size Quantity Required Depth to water (static water level) Pump setting depth TDH (Total Dynamic Head) Above ground pipe length Above ground pipe size GPM required PSI required Discharge pipe size Special requirements, restrictions or limitations 2 22 Flint & Walling. All rights reserved.
3 Non-Cataloged Custom Build Program Company: Flint & Walling Name: Brett Edwards Date: 6/4/22 Pump Data PUMP Sheet DATA - Wolf SHEET Pumps Replacement unit Pump: Size: 5HH7V (5 stage) Type: MultiStage Speed: 345 rpm Synch speed: 36 rpm Dia: 4.25 in Curve: 5HH7V Impeller: 5HH7V Specific Speeds: Ns: 3722 Nss: --- Dimensions: Suction: --- Discharge: --- Vertical Turbine: Bowl size: 5.25 in Max lateral:.25 in Thrust K factor: 2.5 lb/ft Pump Limits: Temperature: 5 F Pressure: 533 psi g Sphere size:.5 in Power: 6 hp Eye area: 7.6 in² Search Criteria: Flow: 4 US gpm Head: 27 ft Fluid: Water Temperature: 68 F Density: 62.3 lb/ft³ Vapor pressure:.339 psi a Viscosity:.9946 cp Atm pressure: 4.7 psi a NPSHa: --- Motor: Standard: NEMA Enclosure: TEFC Sizing criteria: Max Power on Design Curve Size: 6 hp Speed: 36 Frame: 364TS ---- Data Point ---- Flow: 37 US gpm Head: 27 ft Eff: 5.3% Power: 49 hp NPSHr: 32.9 ft ---- Design Curve ---- Shutoff head: 825 ft Shutoff dp: 357 psi Min flow: 2 US gpm BEP: 256 US gpm NOL power: US gpm -- Max Curve -- Max power: US gpm Head - ft NPSHr - ft Power - hp in US gpm Discharge Sizes-3" F(8mm), 4" F(mm); Stage 8.375", Add'l Stage 4.875". Stage Weight 5lbs, Add'l Stage Weight 6lbs. Shutoff head above 2' requires ductile components. Performance Evaluation: Flow Speed Head Efficiency Power NPSHr US gpm rpm ft % hp ft % - Efficiency 22 Flint & Walling. All rights reserved. 3
4 5 GPM 5 thru 5 HP 345 RPM 6 HZ 6T 6 Inch Minimum Inside Well Diameter METERS FEET HP - 8 Stage 32 3 FNPT HP - 5 Stage HP - Stage HP - 9 Stage TOTAL HEAD HP - 8 Stage 5HP - 6 Stage 8 3 HP - 4 Stage Dia. IL HP - 3 Stage 4 5HP - 2 Stage GPM RATED PERFORMANCE m3/h CAPACITY 5 GPM Model No. HP Motor Size Stages Phase (Inches) Efficiency at Pump Motor Rated Flow T5B T5B % 6T5B7 7-/ % 6T5B % 6T5B % 6T5B % 6T5B % 6T5B % 6T5B % 6T5B % Note: 3 discharge is standard on 6T pumps. 4 discharge is available at no extra charge, but must be specified at time of order Flint & Walling. All rights reserved. IL85
5 2 GPM 5 thru 6 HP 345 RPM 6 HZ 6T 6 Inch Minimum Inside Well Diameter METERS 36 FEET HP - 3 Stage HP - 2 Stage FNPT 7 4HP - 9 Stage 2 6 3HP - 8 Stage TOTAL HEAD HP - 6 Stage 2HP - 5 Stage 3 8 5HP - 3 Stage 2 HP - 3 Stage 4 7.5HP - 2 Stage 5HP - Stage 5.75 Dia. IL GPM m3/h RATED PERFORMANCE CAPACITY IL86 2 GPM (Not available with 4 motor bracket) Model No. HP Motor Size Stages Phase (Inches) Efficiency at Pump Motor Rated Flow 6T2B % 6T2B7 7-/ % 6T2B % 6T2B % 6T2B % 6T2B % 6T2B % 6T2B % 6T2B % 6T2B % Note: 3 discharge is standard on 6T pumps. 4 discharge is available at no extra charge, but must be specified at time of order. 22 Flint & Walling. All rights reserved. 5
6 25 GPM 5 thru 6 HP 345 RPM 6 HZ 6T 6 Inch Minimum Inside Well Diameter METERS FEET HP - 9 Stage FNPT 5HP - 5 Stage HP - 2 Stage TOTAL HEAD HP - 9 Stage 25HP - 7 Stage 3 2HP - 6 Stage 8 2 5HP - 4 Stage 4 HP - 3 Stage 7.5HP - 2 Stage 5HP - Stage Dia. IL GPM m3/h RATED PERFORMANCE CAPACITY 25 GPM Model No. HP Motor Size Stages Phase (Inches) Efficiency at Pump Motor Rated Flow T25B T25B % 6T25B7 7-/ % 6T25B % 6T25B % 6T25B % 6T25B % 6T25B % 6T25B % 6T25B % 6T25B % IL87 Note: 3 discharge is standard on 6T pumps. 4 discharge is available at no extra charge, but must be specified at time of order Flint & Walling. All rights reserved.
7 325 GPM 5 thru 6 HP 345 RPM 6 HZ 8T 8 Inch Minimum Inside Well Diameter METERS FEET 28 6HP - 2 Stage FNPT 2 7 5HP - 8 Stage 6 TOTAL HEAD HP - 7 Stage 3HP - 6 Stage 25HP - 5 Stage 3 2HP - 4 Stage 8 2 5HP - 3 Stage 4 HP - 2 Stage 7.5HP - 2 Stage 5HP - Stage GPM IL Dia m3/h RATED PERFORMANCE CAPACITY IL GPM Model No. HP Motor Size Stages Phase (Inches) Efficiency at Pump Motor Rated Flow 8T325B % 8T325B7 7-/ % 8T325B % 8T325B % 8T325B % 8T325B % 8T325B % 8T325B % 8T325B % 8T325B % Note: 4 discharge is standard on 8T pumps. 6 discharge is available at no extra charge, but must be specified at time of order. 8 discharge is available by quote only. 22 Flint & Walling. All rights reserved. 7
8 4 GPM 7.5 thru HP 345 RPM 6 HZ 8T 8 Inch Minimum Inside Well Diameter METERS FEET HP - 9 Stage 5 FNPT HP - 8 Stage 2 6 TOTAL HEAD HP - 6 Stage 5HP - 5 Stage 4HP - 4 Stage 8 3 3HP - 3 Stage 25HP - 3Stage IL HP - 2 Stage 5HP - 2 Stage HP - Stage 7.5 Dia. 7.5HP - Stage GPM RATED PERFORMANCE CAPACITY IL89 m3/h 4 GPM Model No. HP Motor Size Stages Phase (Inches) Efficiency at Pump Motor Rated Flow 8T4B7 7-/ % 8T4B % 8T4B % 8T4B % 8T4B % 8T4B % 8T4B % 8T4B % 8T4B % 8T4B % 8T4B % Note: 4 discharge is standard on 8T pumps. 6 discharge is available at no extra charge, but must be specified at time of order. 8 discharge is available by quote only Flint & Walling. All rights reserved.
9 6T Submersible Pump Selection Charts Model HP Stg. 6T5B5 6T5B T5B7 7-/2 3 6T5B 4 6T5B T5B T5B T5B3 3 6T5B T5B5 5 8 Disch. Press T Series 5 GPM Turbine Pump Depth To Water In Feet - Capacities In Gallons Per Minute Max. Press Ft. PSI NOTE: Friction loss not included in selection charts. 22 Flint & Walling. All rights reserved. 9
10 6T Submersible Pump Selection Charts Model HP Stg. 6T2B5 6T2B56 5 6T2B7 7-/2 2 6T2B 3 6T2B T2B T2B T2B T2B T2B T2B6 6 3 Disch. Press T Series 2 GPM Turbine Pump Depth To Water In Feet - Capacities In Gallons Per Minute Max. Press Ft. PSI Flint & Walling. All rights reserved.
11 6T Submersible Pump Selection Charts Model HP Stg. Disch. Press. 6T Series 25 GPM Turbine Pump Max. Depth To Water In Feet - Capacities In Gallons Per Minute Press Ft. PSI 6T25B5 6T25B T25B7 7-/ T25B T25B T25B T25B T25B T25B T25B T25B Flint & Walling. All rights reserved.
12 Submersible Pumps For Six Wells 2 GPM For Six-Inch Wells Series 6P High capacity six submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water volume applications Cast iron suction and discharge housings Stainless steel pump shaft and coupling Complete selection of Franklin stainless steel motors
13 Submersible Pumps For 6 and 8 Inch Wells 6P SERIES 5 TO 3 HP 5, 8 AND 2 GPM Component Description Discharge Motor Bracket Suction Screen Motor Coupling 6P, 6T & 8T Features & Benefits 6P Series 5, 8 & 2 GPM 5-3HP Cast Iron with closed sintered lead free sleeve bearing, 3 NPT Cast Iron for 4 and 6 NEMA Std motors 43 SST One-piece stainless steel Staging 34 heavy wall stainless steel shell, fiberglass reinforced Noryl diffusers and axial mixed flow impellers, acetal diffuser plates. Stage Bearings Stainless steel sleeve and marine rubber radial bearing Thrust collar Stainless steel thrust bearing in each stage Pump Shaft 46 stainless steel 3/4 hex drive shaft Cable Guard 32 stainless steel NOTE: Check Valve not supplied 22 Flint & Walling. All rights reserved. 3
14 5 GPM 5 thru HP 345 RPM 6 HZ 6P 6 Inch Minimum Inside Well Diameter Meters 2 Feet 7 HP - Stage FNPT /2 HP - 8 Stage 4 Total Head HP - 4 Stage % EFF Dia.* IL83 *Includes Cable Guard GPM m 3 /h Rated Performance Capacity IL399 5 GPM Model No. HP Motor Size Stages Phase Pump Motor P5A P5A P5A7 7 / P5A Flint & Walling. All rights reserved.
15 8 GPM 5 thru 2 HP 345 RPM 6 HZ 6P 6 Inch Minimum Inside Well Diameter Meters Feet 32 2 HP - 6 Stage Recommended Operating Range 3-2 GPM FNPT HP - 2 Stage 7 Total Head HP - 8 Stage /2 HP - 6 Stage % EFF HP - 4 Stage Dia.* IL83 4 *Includes Cable Guard GPM m 3 /h Capacity Rated Performance IL43 8 GPM Model No. HP Motor Size Stages Phase Pump Motor P8A P8A P8A7 7 / P8A P8A P8A Flint & Walling. All rights reserved. 5
16 2 GPM 5 thru 3 HP 345 RPM 6 HZ 6P 6 Inch Minimum Inside Well Diameter Meters Feet 3 3 HP - 2 Stage HP - Stage Recommended Operating Range 7-7 GPM 3 FNPT HP - 8 Stage Total Head HP - 6 Stage HP - 4 Stage 7 /2 HP - 3 Stage 5 HP - 2 Stage % EFF IL83 Dia.* *Includes Cable Guard GPM m 3 /h Rated performance Capacity IL43 2 GPM Model No. HP Motor Size Stages Phase Pump Motor P2A P2A P2A7 7 / P2A P2A P2A P2A P2A Flint & Walling. All rights reserved.
17 6 Submersible Pump Selection Charts 6P SERIES 5 GALLON PER MINUTE SUBMERSIBLE PUMPS Model No. HP Stages 6P5A P5A7 7-/2 8 6P5A Disch. Press DEPTH TO WATER LEVEL IN FEET - CAPACITIES IN GALLONS PER MINUTE Max. Press Ft. PSI Model No. HP Stages 6P8A P8A7 7-/2 6 6P8A 8 6P8A P8A P SERIES 8 GALLON PER MINUTE SUBMERSIBLE PUMPS Disch. DEPTH TO WATER LEVEL IN FEET - CAPACITIES IN GALLONS PER MINUTE Max. Press. Press Ft. PSI NOTE: Friction loss not included in selection charts. 22 Flint & Walling. All rights reserved. 7
18 6 Submersible Pump Selection Charts Model No. HP Stages Disch. Press. 6P2A P2A7 7-/2 3 6P2A 4 6P2A P2A P2A P2A P SERIES 2 GALLON PER MINUTE SUBMERSIBLE PUMPS DEPTH TO WATER LEVEL IN FEET - CAPACITIES IN GALLONS PER MINUTE Max. Press Ft. PSI Flint & Walling. All rights reserved.
19 Model Code, Motors and Control Boxes Min. Well Diameter MODEL NO. CODE 5, 8, 2 GPM 6 P 8 A 7 Series P - Thermoplastic Impellers & Diffusers GPM Series Designation Motor H.P. Size (5 designates 5 HP, 4 inch motor, 56 designates 5 HP 6 inch motor) Order pump, motor and control box separately. Magnetic starters for three phase must be purchased locally. Lead wire assembly included with motor. HP Rating 5 7-/ , 6 & 8 FRANKLIN SUBMERSIBLE MOTORS & CONTROL BOXES Diameter Voltage & Motor Control Box Phase Order No. Order Number 4 23V/PH V/3PH V/3PH V/3PH V/PH V/3PH V/3PH V/3PH V/PH V/3PH V/3PH V/3PH V/PH V/3PH V/3PH V/3PH V/PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH V/3PH Flint & Walling. All rights reserved. 9
20 Submersible Pumps For information on the complete line of F&W submersible pumps, visit: flintandwalling.com Flint & Walling 95 North Oak Street Kendallville, IN flintandwalling.com 2 22 Flint & Walling. All rights reserved.
SUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T
SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large
More information50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells
FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,
More informationSix-Inch Submersible Pumps
FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationADVANCE. 2 Pole Impeller PUMPS PUMPS
2 Pole Impeller.4 The Advance design meets requirements of low flow, higher head applications as compared to the Advance legacy series. Use of Noryl resin for wetted parts enables this strong, durable,
More informationITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6" Submersible Pumps
B45-7J Goulds Pumps 45J and 7J Hz High Capacity Flat Bowl 6" Submersible Pumps For 6" and larger wells Goulds Pumps is a brand of Corporation. www.goulds.com Engineered for life Features n Powered for
More informationAermotor 4 SUBMERSIBLE PUMPS 35, 50, 75, 90 GPM A+ SUPER SUB Series stainless steel
A+ SUPER SUB Series stainless steel The A+ Super Sub Series Stainless Steel 4 Submersible Pumps deliver efficient and dependable performance even in rough, aggressive water. Heads to 640 feet and capabilities
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6" Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity
Goulds Pumps 7L, 9L, 15L, 2L, 3L Stainless Steel 6" Submersible Pumps 6 Hz High Capacity For 6" and larger wells Goulds Pumps is a brand of ITT Residential and Commercial Water. www.goulds.com Engineered
More informationMargaret M. Alkek Building for Biomedical Research Baylor College of Medicine. Appendix A Runaround Loop Component Information
Justin Mulhollan Spring 06 Mechanical Option Margaret M. Alkek Building for Biomedical Research Baylor College of Medicine Houston, TX Appendix A Runaround Loop Component Information 47 Pump Data Sheet
More information8" Submersible Turbine Pump 450 GPM
8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive
More informationTECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More information100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium
More informationPRODUCT CATALOG SUBMERSIBLE PUMPS RESIDENTIAL & LIGHT COMMERCIAL. franklinwater.com
PRODUCT CATALOG SUBMERSIBLE PUMPS RESIDENTIAL & LIGHT COMMERCIAL franklinwater.com SUBMERSIBLE PUMPS Model Number Nomenclature...2 4" 32 Series Pumps...4 Ordering Information...5 5 gpm...6 7 gpm...8 1
More informationREDUCED DIAMETER SUBMERSIBLE PUMPS
3200 SERIES REDUCED DIAMETER SUBMERSIBLE PUMPS The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric
More informationITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems
B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationFlow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS " CCW " CCW
6 Hz LS EXTENSION 4" Submersible Pumps MODEL LS 5LS, 7LS, LS, LS, 8LS, 25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationfranklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps
franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump
More informationHigh Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
More informationFAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934
FAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934 Section 932 Page 393 Supersedes Section 932 Page 393 Dated April 6 2.5 GPM 45 104 FJP-104-2.5 X900101 50 115.5 FJP-115.5-2.5 X900102 55 127
More informationSubmittal Data 3450 RPM 60 Hertz JOB or CUSTOMER:
Redi-Flo4 Environmental Submersible Pumps 5E Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: APPROVED BY: ORDER NO: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM
More informationSUBMERSIBLE TURBINE PUMPS
" STS SERIES - GPM FEATURES % factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
More informationSubmersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
More informationSUBMERSIBLE PUMPS FLINT & WALLING SERIES STAINLESS STEEL C/W MOTOR 4" - 3 WIRE - SINGLE PHASE AND CONTROL BOX
SUBMERSIBLE PUMPS FLINT & WALLING SERIES STAINLESS STEEL Page 1 APRIL 1, 2016 C/W MOTOR 4" - 3 WIRE - SINGLE PHASE AND CONTROL BOX Part US No. Model HP Volts GPM Stages Price M8469690 4F05S05 1/2 115 5
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationEngineers Without Borders
Engineers Without Borders Proposal No: JI12-02-07 04 Item No: ITEM 001 February 7, 2012 Attn: Adam MODEL:VIT-CATM Size:7CHC 10 Stage(s) QTY:1 Operating conditions SERVICE LIQUID LIQUID TYPE CAPACITY RATED
More informationHorizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0110 Supersedes 0909 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
More informationAermotor 4 Submersible Pumps - 5, 8, 12, 16, 20, 22 & 25 GPM
A+ SUPER SUB series stainless steel Precision engineered stainless steel 4 submersible pumps that deliver dependable performance and efficiency in all applications. Heads to 000 feet and capabilities to
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More information50 Hertz Water Systems
FW7 4 Supersedes 43 Hertz Water Systems Submersible Pumps, Shallow Well & Convertible Jet Pumps and Centrifugal Pumps Your Peace of Mind is Our Top Priority PRODUCT INDEX cm (4 ) &. cm (6 ) Submersibles...
More information4" SUBMERSIBLE PUMPS 5, 8, 12, 16, 20, 22 AND 25 GPM
4" SUBMERSIBLE PUMPS 5, 8, 12, 16, 2, 22 AND 25 GPM Precision engineered stainless steel that deliver dependable performance and efficiency in all applications. Heads to 1 feet and capabilities to 35 GPM.
More information4WN. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE MULTISTAGE PUMPS. Pag
CONTENTS Pag - SPECIFICATIONS 200 PUMP SPECIFICATION 200 MOTOR SPECIFICATION 201 SECELTION CHART 202-203 TYPE KEY AND CURVES SPECIFICATIONS 204-205 PERFORMANCE CURVE 1 206 PERFORMANCE CURVE 2 207 PERFORMANCE
More informationPrecision-engineered, corrosionresistant
Precision-engineered, corrosionresistant Composite Pumps in 5 and 7 GPM deliver efficient, dependable performance even in rough, aggressive water. Heads to over 850 feet and capacities to 10 GPM. Built
More informationD Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationITT. Engineered for Life. GS Subs, New Guardian System and You, Stronger Together!
GS Subs, New Guardian System and You, Stronger Together! GS Submersibles have always had a reputation for being reliable and tough pumps. Now the best is even better! The new Guardian System now makes
More informationHIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel
More information5LS, 7LS, 10LS, 13LS, 18LS & 25LS 5-25 GPM, ½ 1½ HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More information4" submersible pumps 10, 15, 20, and 30 gpm
UL Classified to ANSI/NSF Standard 6, Drinking Water Systems Components Health Effects Precision-engineered, corrosionresistant Signature 2000 Composite Pumps in 0, 5, 20 and 30 GPM deliver efficient,
More informationStainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution
Stainless Steel Submersible Pumps DATA BOOKET ISO 1 Company Pumping Solution Hz Photographs of a few Manufacturing Units Submersible Pumps Motors Hz 4 Submersible Pump Pumping Solution 11 Product data
More information4 5 GPM 7 GPM 10 GPM 15 GPM 20 GPM 30 GPM 35 GPM 55 GPM 95 GPM
PRO SERIES STAINLESS STEEL SUBMERSIBLE S 4 5 GPM 7 GPM 0 GPM 5 GPM 20 GPM 30 GPM 35 GPM 55 GPM 95 GPM SPECIFICATIONS Capacity: 5 to 20 GPM Heads: Up to 200 Feet 3450 RPM - 60 HZ Recommended for Clean Water
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationPrecision-engineered, corrosionresistant
Precision-engineered, corrosionresistant Series J Composite Pumps in, 5, 2 and 3 GPM deliver efficient, dependable performance even in rough, aggressive water. s to over 6 feet and capacities to 45 GPM.
More informationBerkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES
Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
More informationITT. Red Jacket Water Products GRIZZLY. red JaCKet Water Products. Engineered for life BRJGRIZZ. Residential Water Systems.
BRJGRIZZ ITT Red Jacket Water Products GRIZZLY Features n Nylon impact and corrosion resistant discharge head and motor adapter. n Pump shell constructed with a press and roll process for better performance.
More informationPrecision-engineered, corrosionresistant
Precision-engineered, corrosionresistant Signature 2000 Composite Pumps in 5 and 7 GPM deliver efficient, dependable performance even in rough, aggressive water. Heads to over 850 feet and capacities to
More informationSUBMITTAL DATA WATER PRESSURE BOOSTER SYSTEMS
WATER PRESSURE BOOSTER SYSTEMS Model WPB-100-40TT APPLICATION Applications include commercial, industrial and other installations requiring a boost in water pressure. The NECO Water Pressure Booster System
More information5GB, 7GB, 10GB, 18GB, 25GB, 33GB
B-33GB GB, 7GB, GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction: Standard
More informationTECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 10SB & 18SB 5-18 GPM, ½ 1½ HP, 60 HZ SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 1SB & 18SB 5-18, ½ 1½ HP, 6 HZ SUBMERSIBLE PUMPS FEATURES Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationTable of Contents. 4 Submersible Pumps
5 Hz 4 Submersible Pumps Table of Contents 4 Submersible Pumps 44 Tri-Seal Pumps... 2 18 LPM Tri-Seal... 5 25 LPM Tri-Seal... 7 3 LPM Tri-Seal... 9 45 LPM Tri-Seal... 11 6 LPM Tri-Seal... 13 7 LPM Tri-Seal...
More informationConstant Pressure - Variable Speed Drive Systems
Constant Pressure - Variable Speed Drive Systems FW121 211 Supersedes 11 COMMANDER PRO CP75, CP1 and CP15 COMPLETE PACKAGED CONSTANT PRESSURE SYSTEMS DESIGNED FOR THE PROFESSIONAL PUMP INSTALLER LIMITED
More information33GS, 40GS, 55GS, 60GS, 75GS & 80GS GPM, 1 10 HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B33-8GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationWebtrol s Family of Pumps
www.webtrol.com Webtrol s Family of Pumps Vertical Series Booster Pumps Stainless Steel Multistage Centrifugals The Webtrol V Series multistage pumps offer technically advanced designs to meet market demands
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationS SERIES 4" SUBMERSIBLE PUMPS FEATURES. Smooth and Quiet Precision-crafted, 4" submersible well pumps for quieter operation
S SERIES The S Series 4" submersibles have been a successful entry in the Myers well pump line for many years and have a history of tremendous reliability. The all stainless steel construction is ideal
More informationV6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and
More informationSUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES
FEATURES Stainless steel impellers and diffusers to resist corrosion Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than
More informationDolan Mechanical, Inc. 638 Johnson Road, PO Box 326 Sicklerville, NJ (856) FAX (856) NO EXCEPTION TAKEN
Dolan Mechanical, Inc. 638 Johnson Road, PO Box 326 Sicklerville, NJ 08081 (856) 629-9331 FAX (856) 629-6545 TO: Imad Haq PROJECT NAME: Philadelphia International Airport Concourse B HVAC Renovation &
More information1100 Series Multi-Stage Vertical Turbine Pumps
1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.
More informationSPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
More informationCALCULATION OF BOWL HEAD OR DISCHARGE HEAD
February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationGoulds High-Pressure Multi-Stage Pumps
Goulds 3311 High-Pressure Multi-Stage Pumps Goulds Model 3311 Multistage Pumps Designed for a Wide Range of High Pressure Services Goulds Model 3311 is a radial split, segmented ring multistage pump...
More informationSS7 SUBMERSIBLE ELECTRIC PUMPS 7
SS7 TECHNICAL DATA Performance range: flow up to 110 m3/h and max head of 423 m Max. quantity of sand/silt: 50g/m3 Max. ambient temperature: 30 C (50 C available on request) Outlet connection diameter
More information4" Submersible Pumps. The Company You Trust Deep Down
4" Submersible Pumps The Company You Trust Deep Down 4" Submersible Series Five The standard J-Class Series Five submersible pump features unique hydraulics that improve effi ciency and minimize wear even
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationSystem One Pumps Selecting Centrifugal Pumps S1-201
Selecting Centrifugal Pumps S1-201 Operating Parameters Head/Capacity Temperature Viscosity Density Vapor Pressure Solids Content Chemical Compatibility Multiple conditions Remember The system controls
More information5CS, 7CS, 10CS, 13CS, 18CS & 25CS 5-25 GPM, ½ 3 HP, 60 HZ, SUBMERSIBLE PUMPS
FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without damage to the motor. Sand
More information4" SUBMERSIBLE PUMP 4" SUBMERSIBLE PUMP. "GS" series. "ST" series. "SL" series. ST Series (stainless steel) SL Series (thermoplastic)
4" SUBMERSIBLE PUMP 4" SUBMERSIBLE PUMP ST / GS SERIES (stainless steel) SL SERIES (thermoplastic) The "ST / GS / SL" series are built with such precision that they provide a superior output for many years.
More information2CDU70/206-2HP 2CDU70/306-3HP CDU120/306-3HP 2CDU200/506-5HP 607
Model CDX/CDU Contents CDX/CDU Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data CDXU70/06-HP CDXU70/6-HP 5 6 8 6 CDXU0/6-HP CDXU00/6-5HP 7 CDU70/06-HP
More information4 WT SERIES SUBMERSIBLE
4 WT SERIES SUBMERSIBLE Webtrol s 4 WT Series Webtrol s WT Series pumps offer superior performance and exceptional resistance to abrasives, due to the floating stack design. An excellent choice for residential
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationAPPLICATIONS Water systems for residential, industrial, commercial, multiple housing and farm use.
Precision-engineered, highquality, rugged MGS Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water. The TrimLine 5 and 7 GPM Series Pumps are 3-3/4" maximum
More information