HEAT ON. Plastic welding extruder. BAK Thermoplastic Welding Technology AG. Industriestrasse Kerns / Switzerland
|
|
- Ellen Collins
- 5 years ago
- Views:
Transcription
1 HEAT ON Plastic welding extruder BAK Thermoplastic Welding Technology AG Industriestrasse Kerns / Switzerland Telefon +41 (0) Fax +41 (0)
2 HEAT ON With pre-heater. Patented temperature measurement system by Dohle, Germany. The thermocouple is located inside the mass barrel on the outlet, this guarantees a real temperature control and read out. Cold start protection by mass and air temperature. Every type is available with a revolving head with integrated preheat nozzle to weld in any direction. No wear parts on the rod feed system. For more information v isit our website We develop individual tool type, especially suited for your application. View front panel ExOn 2 3. Integrated tool stand for ExOn All the extruder are also available for external air supply on request.
3 Hand welding extruder MICRO Small, light, unique for welding of, PVDF and PVC separated air and mass temperature control patented temperature control direct in the mass internal air supply built-in in the control box motor for drive and blower Worldwide the smallest and lightest hand held extrusion welder. Extruder weight only 2,3 kg, output up to 0,5 kg/h. Technical Data Voltage V 230 Frequency Hz 50 / 60 Power consumption W 1300 Output with HDPE material kg / h 0,1 0,5 Welding consumable 3 and 4 round Size Extruder (l x w x h) 410 x 75 x 100 Size control box (l x w x h) 530 x 210 x 410 Weight Extruder kg 2,3 Weight control box kg 20 with 5 m cord Protection class I Markings BAK Thermoplastic Welding Technology AG Industriestrasse Kerns / Switzerland CE info@bak-ag.com Telefon +41 (0) Fax +41 (0)
4 Hand welding extruder EXON 1/2 ExOn 1 *** ExOn 2 ExOn1 A * ExOn 2A * Type Voltage Frequency Power consumption Output with HDPE material Welding consumable Size (l x w x h) Weight Pre-heater Welding materials Protection class I Markings V Hz W kg/h kg ExOn or max. 1,2 3 and 4 round 500 x 100 x 340 5, PVDF, PVC ExOn 1A 230 or max. 1,2 3 and 4 round 500 x 100 x brush ExOn max. 2 4 or 5** round 560 x 120 x 350 7, PVDF, PVC ExOn 2A max. 2 4 or 5** round 560 x 120 x brush * air heated hand welding extruder ** indicate on order *** on request also available with digital read out of the air temperature. 4 You will only achieve optimal results when using original accessories! Subject to technical changes.
5 Hand welding extruder EXON 3/5/6 ExOn 3 ExOn 5 ExOn 3A * ExOn 6 Type Voltage Frequency Power consumption Output with HDPE material Welding consumable Size (l x w x h) Weight Pre-heater Welding materials Protection class I Markings V Hz W kg/h kg ExOn max. 3 4 or 5** round 650 x 120 x 360, PVDF, PVC ExOn 3A max. 3 4 or 5** round 650 x 120 x 360 brush ExOn oder max. 5 5 round 660 x 126 x ExOn oder max. 6 pellets 660 x 126 x 365/ * air heated hand welding extruder ** indicate on order BAK Thermoplastic Welding Technology AG Industriestrasse Kerns / Switzerland info@bak-ag.com Telefon +41 (0) Fax +41 (0)
6 Industry extruder, hose extruder EXON 7/ HS2 ExOn 7 HS2 ExOn Control box type ExOn 7, ExOn Type Voltage Frequency Power consumption Output with HDPE material Welding consumable Size (l x w x h) Weight Pre-heater Welding materials Protection class I Markings 6 HS2 welding head V Hz W kg/h kg ExOn 7 3 x max. 5 5 round 46 x 267 x ExOn 3 x max. 6 pellets 52 x 267 x 242/430 1 HS2 3 x max. 12 pellets 1040 x 600 x You will only achieve optimal results when using original accessories! Subject to technical changes.
7 ACCESSORIES Welding shoe calculation Type Micro Welding shoe fillet seam Welding shoe round D-1175 D-1176 D-1177 D-117 D D sheet thickness () Welding shoe V-seam Nozzle with tacking tip D-1179 D-110 D-111 D-115 sheet thickness () BAK Thermoplastic Welding Technology AG Industriestrasse Kerns / Switzerland info@bak-ag.com Telefon +41 (0) Fax +41 (0)
8 ACCESSORIES Type ExOn 1 6 Transport case (metal) Revolving head D-0965 D-1644 D-1799 D-1041 DX321 Type ExOn 2 DX323 Type ExOn 3 DX325 Type ExOn 5 6 Type ExOn 1 Type ExOn 2 3 Typ ExOn 3A Type ExOn 5 6 Revolving head, 45 angle Revolving head, 90 angle DX326 DX327 DX32 DX330 DX331 DX332 DX333 DX335 Type ExOn 2 Type ExOn 2A Type ExOn 3 Type ExOn 5 6 Type ExOn 2 Type ExOn 2A Type ExOn 3 Type ExOn 5 6 Welding shoes type ExOn 1/1A Fillet seam V-seam D-027 D-02 D-029 D-030 D-039 D-031 D-032 D-033 D-034 sheet thickness () sheet thickness () Corner seam Overlap seam sheet thickness () D D seam width () D D You will only achieve optimal results when using original accessories! Subject to technical changes.
9 Welding shoes type ExOn 1/1A Unshaped Round D-042 D D D x 40 Unshaped round D Welding shoes type ExOn 2 6 Fillet seam Corner seam D-0174 D-0175 D-0177 D-017 D-0179 D-010 D-011 D-012 D-0195 D-0196 D-0197 D-1221 sheet thickness () sheet thickness () Overlap seam D-199 D-0192 D-0193 D-0194 D-0599 D-1223 BAK Thermoplastic Welding Technology AG Industriestrasse Kerns / Switzerland seam width () info@bak-ag.com Telefon +41 (0) Fax +41 (0)
10 ACCESSORIES Welding shoes type ExOn 2 6 V-seam D-0906 D-013 D-014 D-015 D-016 D-017 D-01 D-019 D-0190 D-0191 Unshaped sheet thickness () D-0223 D-0224 D-0225 D-1237 D-0247 D x x x x x x 0 Round Unshaped round D D D D Welding shoes type HS2 Fillet seam Unshaped D-1761 D-1762 D-1763 D-1760 D sheet thickness () x x 0 You will only achieve optimal results when using original accessories! Subject to technical changes.
11 Test equipment Spark tester Welding rod dereeler for 1 roll V Vacuum pump DX V DX V Vacuum test bells Rectangular Round DX x 20 x Inside edge Outside edge Inside corner down Outside corner down Inside corner up Outside corner up BAK Thermoplastic Welding Technology AG Industriestrasse Kerns / Switzerland info@bak-ag.com Telefon +41 (0) Fax +41 (0)
12 HeatOn-GROUP YOUR BEST CHOICE Co n s u l t i n g S a l es Tra i n i n g S e r v i c e D eve l o p m e n t Be rat u n g Ve r k au f S c h u l u n g S e r v i c e En t w i c k l u n g BAK Thermoplastic Welding Technology AG Industriestrasse 6, 6064 Kerns / Switzerland Tel (0) , Fax ++41 (0) info@bak-ag.com Dohle Extrusiontechnik GmbH Eitorfer Strasse 1, 5309 Ruppichteroth / Germany Tel (0) , Fax ++49 (0) info@dohle-extruder.de Herz GmbH Biberweg 1, Neuwied / Germany Tel (0) , Fax ++49 (0) info@herz-gmbh.com
Made simple. High Tech Extruders. The plastic welding solution. BAK Thermoplastic. Birkenweg +41 (0)
Made simple High Tech Extruders The plastic welding solution BAK Thermoplastic B/28-B, Welding GR. Technology Floor, AG Industrial E-Mail Estate, info@bak-ag.com LBS Birkenweg 3 (W), Mumbai - 400 Telefon
More informationHEAT ON. Plastic welding machines. BAK Thermoplastic Welding Technology AG. Industriestrasse Kerns / Switzerland
HEAT ON Plastic welding machines BAK Thermoplastic elding Technology AG HEAT ON Headquarter Asia Office BAK Thermoplastic elding Technology AG BAK Asia Co.,Ltd. 8/1 Ratchaphruek Bang Yi Ruea, Thon Buri
More informationRoof - welding systems
Roof - welding systems Hand welding devices Rion Rion 120 volt Order no. 6600077 pluggable Rion 230 volt Order no. 6600075 pluggable Transport box Order no. 5201000 Technical data Rion / Rion Digital:
More informationRoof - welding systems
Roof - welding systems Hand welding devices Rion Rion 120 volt Order no. 6600077 pluggable Rion 230 volt Order no. 6600075 pluggable Transport box Order no. 5201000 Technical data Rion / Rion Digital:
More informationGeosynthetic Welding Fax Merchandise Way Diamond Springs, CA 95619
Geosynthetic Welding 800.624.2408 530.626.9386 530.626.5144 Fax www.sineqco.com info@sineqco.com 6686 Merchandise Way Diamond Springs, CA 95619 Wedge-It Wedge Welder Since 1987 and well over 4,000 units
More informationPLASTIC WELDING. Plastic fabrication with Leister. Versatile and economical.
PLASTIC WELDING Plastic fabrication with Leister. Versatile and economical. Leister delivers performances. Wherever you need to apply heat, Leister provides the ideal solution. We have been the worldwide
More informationOPERATING MANUAL. BAK Thermoplastic Welding Technology AG 1
OPERATING MANUAL BAK Thermoplastic Welding Technology AG 1 SAFETY Danger to life Unplug the tool before opening it as live components and connections are exposed. Danger of fire and explosion in case of
More informationGHIBLI. Plastic Welding > Hand tools > GHIBLI. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
GHIBLI Universal tool for welding and shrinking. Two-step air flow switching and stepless temperature. - Universal tool for welding and shrinking - Welding results independent of voltage fluctuations and
More informationPLASTIC WELDING. VARIMAT V2 The new dimension on the roof. NEW!
PLASTIC WELDING VARIMAT V2 The new dimension on the roof. NEW! Ergonomic: Height and angle of guide-bar can be adjusted easily Intuitive: Protected design. Easy-to-view display with e-drive and easy-to-store
More informationDIODE S. Plastic Welding > Hand tools > DIODE S. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
DIODE S Handy and powerful welding tool with steplessly adjustable welding temperature and external air supply. - Electronic temperature control - Overheating protection for heating elements - Adaptor
More informationFlooring UNIFLOOR E/S 88 GROOVER 89. Flooring
86 Flooring UNIFLOOR E/S 88 GROOVER 89 Flooring www.leister.com General Catalog Plastic Welding 2010/11 87 Perfectly stowed away in the provided plastic case. Immaculate weld seams with the UNIFLOOR E.
More informationGeneral Specification
General Specification OF NV-100mmSG (Mod.2) Single Screw Extruder Freesia Macross Corporation April 2009 1. Type General purpose single screw extruder 2. Capacity 300-500 kg/h (ABS pellet) 3. Dimension
More informationPlastic Fabrication. Extrusion and hot-air hand welders. We know how. 2017/2018. The right choice for the specialist.
Plastic Fabrication 2017/2018 Swiss made Extrusion and hot-air hand welders The right choice for the specialist www.leister.com We know how. 2 Dear Leister customers The selection of machines and equipment
More informationTRIAC S. Plastic Welding > Hand tools > TRIAC S. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
TRIAC S The economical hand tool. Deployed worldwide and very reliable, compact and robust. - Adaptor tube with heat protection - Electronic heating element protection - Motor shut-off at minimal carbon
More informationHot Air Devices for welding, heating, shaping of thermoplastic materials. Floor welding machine Nozzles Accessories
S C H W E I S S T E C H N I K O n e c o m p a n y 3 p r o d u c t i o n l i n e s Hot Air Devices for welding, heating, shaping of thermoplastic materials Floor welding machine Nozzles Accessories Hot
More informationENGINEERING+MANUFACTURING. DUNST extruders for the cable production
DUNST extruders for the cable production The DUNST extruders for all applications An ever broadening spectrum of thermoplastics and applications calls for versatile processing machinery solutions. The
More informationHot-Air Hand Tools. Plastic Welding General Catalog
8 Hot-Air Hand Tools Product overview 10 / 11 TRIAC ST / TRIAC S 12 / 13 TRIAC AT 14 Accessories TRIAC ST / TRIAC S / TRIAC AT 15 / 16 / 17 ELECTRON ST 18 / 19 Accessories ELECTRON ST 19 / 20 GHIBLI 20
More informationPLASTIC WELDING. Plastic Welding General Catalog Version 2.0. The only choice for professionals.
PLASTIC WELDING Plastic Welding General Catalog Version 2.0 The only choice for professionals. Leister Technologies AG, Corporate Center, Kaegiswil, Switzerland Leister Technologies AG, production building,
More informationBillboards / Tarpaulins. UNIPLAN E / S 48 UNIPLAN WEDGE 50 UNIMAT V OVERLAP 51 UNIMAT V TAPE 52 TAPEMAT 53 TAPEMAT «Spriegel» 54
46 Billboards / Tarpaulins UNIPLAN E / S 48 UNIPLAN WEDGE 50 UNIMAT V OVERLAP 51 UNIMAT V TAPE 52 TAPEMAT 53 TAPEMAT «Spriegel» 54 Billboards / Tarpaulins www.leister.com General Catalog Plastic Welding
More informationSAW & ESW Strip Cladding Nozzles & Magnetic Steering Device
Tailor-Made ProtectivityTM SAW & ESW Strip Cladding Nozzles & Magnetic Steering Device voestalpine Böhler Welding www.voestalpine.com/welding Cladding Nozzle SK 30 ES2-75 Spare parts standard nozzle SK
More informationModel: Pro-X5 TM. Part Number: /X5/A High Output Thermoplastic Extrusion Welder Operator s Manual. Revision: A
Model: Pro-X TM Part Number: 600-00/X/A High Output Thermoplastic Extrusion Welder Operator s Manual Revision: A Scope of Manual: This manual contains procedures for safety, general unpacking, installation,
More informationTW Electric hot-air automatic welding machine. Four wheel drive and belt system assures wrinkle free welding
TW 5000 Electric hot-air automatic welding machine Four wheel drive and belt system assures wrinkle free welding Adjustable front wheels for easy operation at different angles Powerful motor and efficient
More informationRead the operating instructions carefully before use and keep for future reference.
GB OPERATING INSTRUCTIONS Hot wedge Automatic Welding Tool Read the operating instructions carefully before use and keep for future reference. APPLICATION Hot Wedge Automatic Welding Tool Overlap and tape
More informationGENERAL SPECIFICATION. NR2-46mm (Mod.5) Pelletizing Machine FREESIA MACROSS CORPORATION
GENERAL SPECIFICATION NR2-46mm (Mod.5) Pelletizing Machine FREESIA MACROSS CORPORATION Ver. 2013 CONTENTS 1 Component of machine 1-0. Specification 1-1. Barrel 1-2. Screw 1-3. Gear Box 1-4. Twin screw
More informationTRIAC PID. Plastic Welding > Hand tools > TRIAC PID. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
TRIAC PID The tried and tested hand tool for the specialist. With stepless temperature regulation and digital display. - Reproducible results thanks to digital display of set and actual temperature - Welding
More informationGHIBLI. Plastic Welding > Hand tools > GHIBLI. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
GHIBLI Universal tool for welding and shrinking. Two-step air flow switching and stepless temperature. - Universal tool for welding and shrinking - Welding results independent of voltage fluctuations and
More informationPower cord - Cleaning agent tank. Feed temperature 60 C. Power cord - Outside temperature /3-18 bar/mpa. Heat output - Fuel tank -
HD6/16 4MX 467 x 407 x 1010 mm Power cord - 3,4 kw Operating pressure 30-160/3-16 bar/mpa 230-600 l/h 50 kg Max. pressure 190/19 bar/mpa - 1/230/50 Ph/V/Hz Feed temperature 60 C HDS9/18 4M 1330 x 750 x
More informationtechbex The All-in-One solution for technical profiles
techbex The All-in-One solution for technical profiles Extrusion of technical profiles The techbex line concept is ideally suited for the extrusion of single-walled technical profiles and hollow profiles
More informationDifferential pressure switches for air, flue and exhaust gases Pressure switch for gas
es for air, flue and exhaust gases Pressure for gas /2 5.08 Printed in Germany Edition 02.18 Nr. 223 839 1 6 Technical description The differential LGW A4 is an adjustable differential as per EN 1854 for
More informationARCOTRAC HD. Your global partner for pipeline equipment!
ARCOTRAC 900 1100 1800 1800 HD Your global partner for pipeline equipment! ARCOTRAC 900 1100 1800 1800 HD Company Vietz has developed a totally new ARCOTRAC Series which has been especially designed according
More informationThe MADO EXTRUSION GRINDER For ambitious food processing companies.
The MADO EXTRUSION GRINDER For ambitious food processing companies. Years Meat processing machines The MADO EXTRUSION GRINDER increases your profits. The new EXTRUSION GRINDER from MADO - specialist manufacturers
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
More informationRHYTEMPER. We use energy sensibly. ONI-Wärmetrafo GmbH. Niederhabbach 17 - D Lindlar / Germany Telefon (+) Telefax (+)
RHYTEMPER We use energy sensibly ONI-Wärmetrafo GmbH Niederhabbach 17 - D-51789 Lindlar / Germany Telefon (+) 2266-47480 - Telefax (+) 2266-3927 RHYTEMPER We use energy sensibly RHYTEMPER Temperature control
More informationAutomatic Capsule Filling Equipment SPT Series
EBSEOS GmbH Pharmaceutical Machinery & Services Industriestrasse 14 79664 Wehr Tel. ++49 (0)7762 80 68 966 Fax. ++49 (0)7762 80 68 967 Automatic Capsule Filling Equipment SPT Series Capsule Filling Equipment
More informationSpritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
More informationMARK SERIES EXTRUDER
MARK SERIES EXTRUDER Davis-Standard s Mark extruder is built for all applications and value engineered to meet demanding requirements. The Mark is available with a wide range of feedscrews and control
More informationCoextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT
Coextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT Film coextrusion is becoming more and more widespread in the packaging industry and is quickly replacing monolayer
More informationDOSING UNITS PLASTICOLOR 1500 PLASTICOLOR 2500 PLASTICOLOR 3200 PLASTICOLOR 5000
DOSING UNITS PLASTICOLOR 1500 PLASTICOLOR 2500 PLASTICOLOR 3200 PLASTICOLOR 5000 Function of PLASTICOLOR Dosing Units... 3 PLASTICOLOR 1500... 4 PLASTICOLOR 2500... 5 PLASTICOLOR 3200... 6 PLASTICOLOR
More informationScientific COMBI 26 mm Twin Screw
Scientific COMBI 26 mm Twin Screw Extruder type LTECC26-40 with Co and Counter-rotating twin screws for compounding of PVC and most other thermoplastic resins 26 mm COMBI twin screw with 15 KW drive and
More informationFlexible storage and handling with ProMinent The right products for storage and transfer of liquid chemicals
Flexible storage and handling with ProMinent The right products for storage and transfer of liquid chemicals Printed in Germany, PT PM 056 09/06 GB MT06 01 04/05 GB Storage and transfer Storage tanks Our
More informationHOPPER LOADER. Serie ITP. Serie ISP. Serie IPL. Serie IPL-P
HOPPER LOADER Serie ITP Serie ISP Serie IPL Serie IPL-P Hopper Loaders type ITP Suitable for: three-phase version for granulate/regrind filter with large filter surface automatic filter cleaning cycle
More informationLabtech Engineering Co., Ltd.
New μcompounder Modular 12 mm twin-screw extruders types LTE 12-36 with segmented screws and screw speeds up to 800 RPM Available both in manual as well as fully computerized version with LCD touch screen
More informationPromix Solutions trust the leader. Static Mixers Solutions for Injection Molding
Promix Solutions trust the leader Static Mixers Solutions for Injection Molding Your partner in the plastics processing industry Founded in 2012 as a spin-off of Sulzer Chemtech Subsidiaries in Winterthur,
More informationALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
More informationALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
More informationExhaust Systems and Emissions. Source: BMW
Exhaust Systems and Emissions Source: BMW January 2014 Contents Testing of Exhaust Systems Hot Gas Bending Cycle Test Measurements of Mass Flow Rates Structure High Temperature Oven DPF Development Urea
More informationALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
More informationyour partner in leading technology tecnocanto Extrusion Extrusão Recycling Reciclagem Packaging Embalagem
your partner in leading technology Extrusion Extrusão Recycling Reciclagem Packaging Embalagem Heating elements TC.C1-REV Ø, lda @.pt www..pt lines Pipes / Profiles 3D printer filaments, lda @.pt www..pt
More informationALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
More informationALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
More informationMolding, Monitoring and More. ENGEL at MD&M Minneapolis
Molding, Monitoring and More. ENGEL at MD&M Minneapolis York, Pa. September 25, 2012 ENGEL North America will exhibit a wide range of injection molding technology at the upcoming MD&M Minneapolis 2012
More informationPIPE LOG BOOK. Project no:... Project:... Construction section:... On behalf of:... Commissioned by:... Order no:... Date:... Construction period:...
FW-FERNWÄRME-TECHNIK GmbH Grafftring 2-6 D-29227 Celle Tel.: + 49 5141 888 88-0 Fax: + 49 5141 888 88-22 E-Mail: info@fw-gmbh.de Internet: www.fw-gmbh.de PIPE LOG BOOK... Project:... Construction section:...
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz
Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More informationFacts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
More informationEXTRU - the reliable extrusion gear pump
EXTRU - the reliable extrusion gear pump The EXTRU is mainly used in conjunction with extruders or kneaders. It reduces the natural pulsation and irregular conveyance, particularly in single-screw extruders,
More informationCONEXTRU GMBH LIST OF PRODUCT DEVELOPMENTS. Page 1 of 5
Page 1 of 5 LIST OF PRODUCT DEVELOPMENTS BY CONEXTRU GMBH MARCH 2009 TO SEPTEMBER 2013 Page 2 of 5 1.0 PO PIPE HEADS mono- multi- cross- heads Helical spiral distributor heads Monolayer spiral head up
More informationPressure switch for gas, GW 500 A4 GW 500 A4/2
for gas, air, flue gases and combustion products /2 5.09 Printed in Germany Edition 02.18 Nr. 255 960 1 6 Technical description The pressure is an adjustable pressure as per EN 1854 (GW 6000 A4 as per
More informationT-W s Material Joining Solutions include:
elcome to Taylor-Winfield Technologies, a world leader in the design and manufacture of material joining equipment and systems with a legacy of over 100 years. As an original equipment manufacturer with
More informationThe Original. Since 1972
The Original Since 1972 Company Building in Frauenfeld We are located in the City of Frauenfeld in the North-East of Switzerland only 40 km from the International Airport Zurich. Workshop From the development
More informationPlasma cutting unit Model Air Cut 120 W
Operation Manual Plasma cutting unit Model Air Cut 20 W MERKLE Schweissanlagen-Technik GmbH Industriestrasse 3 D-89359 Koetz, Germany Tel.: ++49-822-95-0 Fax: ++49-822-95-40 www.merkle.de Table
More informationPower Sources and Components for Complex Welding Plants. Product Overview for Welding Equipment
Power Sources and Components for Complex Welding Plants Product Overview for Welding Equipment Technical Equipment Welding Portals / Ground Handling Gears General technical data Always customised versions
More informationHigh-pressure switch for gas, air, flue gases and combustion products GW 500 A4 GW A4/2 HP
High-pressure for gas, air, flue gases and combustion products HP /2 HP 5.04 Printed in Germany Rösler Druck Edition 06.04 Nr. 241 654 1 6 Technical description The pressure is an adjustable pressure for
More informationReplacing roof page 1. c Carrera (996) Body centre, roof, frame
911 Carrera (996) Body centre, roof, frame Replacing roof The following spare body parts are required for the repair "Replacing roof": A = Roof Printed in Germany -42,2000 51-15 page 1 Body centre, roof,
More informationALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
More informationALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
More informationSpecification GS329 1
N:\DEPTS\TECHPUB\SPECIFICATIONS\GS329-2008-06-02.FM1 REVISED JUNE 2, 2008 11:53 AM1 Specification GS329 1 myreflow.com Soldering System Manufacturer: Vitronics Soltec (Suzhou) Co., Ltd. Workshop II, 858
More informationportable generating sets power range 2 15 kva 2015
portable generating sets power range 2 15 kva 2015 Power generating systems with individual solutions Content General information 04 Portable gensets - Standard Line 06 Portable gensets - Professional
More informationALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
More informationEN Wide belt sanders BULDOG. Type 3 5 7
EN Wide belt sanders BULDOG Type 3 5 7 WIDE BELT SANDER BULDOG 3 MEASURING OF WORKPIECE HEIGHT TABLE POSITIONING BULDOG 3 R 650 C 650 R 950 C 950 R 1100 C 1100 RR 650 RC 650 RR 950 RC 950 RR 1100 RC 1100
More informationOPERATING INSTRUCTIONS. LEISTER Varimat V Hot Air Automatic Welding Machine
GB OPERATING INSTRUCTIONS Hot Air Automatic Welding Machine Please read operating instructions carefully before use and keep for further reference. APPLICATION Automatic Overlap Welding Machine For overlap
More informationInstruction Manual Extruder Sensor Rheomex 252/254
Instruction Manual Extruder Sensor Rheomex 252/254 Part No. 002-8632 3-1-014-2 08.1992 Thermo Haake Thermo Haake (USA) Rheo s.a. (France) Dieselstraße 4 53 W. Century Road 99 Route de Versailles D-76227
More informationFeed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled. Needle shut-off
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Needle shut-off Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated
More informationOPERATION MANUAL. TZ Two Zone Controller
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
More information2016 /17. We know how. General Catalog US-Edition Plastic Welding. Professional equipment for workshops and construction sites. Version 6.
2016 /17 General Catalog US-Edition Plastic Welding Professional equipment for workshops and construction sites Version 6.1 We know how. Leister Technologies AG, Corporate Center, Kaegiswil, Switzerland
More informationALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
More informationTechnical specification. Electric cold milling machine W 350 E
Technical specification Electric cold milling machine W 350 E Technical specification Milling width max. Milling depth* 1 Milling drum Tool spacing Electric cold milling machine W 350 E 350 mm 0 100 mm
More informationAsynchronous generators
Asynchronous generators Contents Product description 13/2 Overview of technical data 13/3 Motor selection data Series G4.R on the basis of Premium Efficiency IE3 13/4 Series GE.R on the basis of High Efficiency
More informationOperating Instructions (Translation of the original operating instructions) Leister TAPEMAT Hot-Air welding machine
GB TAPEMAT Leister Process Technologies Galileo-Strasse 10 CH-6056 Kaegiswil/Switzerland Tel. +41 41 662 74 74 Fax +41 41 662 74 16 www.leister.com sales@leister.com Operating Instructions (Translation
More informationDiaphragm Pumps for Air, Gases and Vapours LABOPORT Mini Diaphragm Vacuum Pumps and Compressors
Data Sheet E 1 LABOPORT Mini Diaphragm Vacuum Pumps and Compressors Series LABOPORT N 8 K_.18 Pumps Technical features: 1% oil-free transfer Pure transferring, evacuation and compression of gases Version
More information2017 /18. We know how. General Catalog US-Edition Plastic Welding. Professional equipment for workshops and construction sites.
Swiss made 2017 /18 General Catalog US-Edition Plastic Welding Professional equipment for workshops and construction sites www.leister.com We know how. Leister Technologies AG, Corporate Center, Kaegiswil,
More informationA compact building site upright type which has been designed according to the needs of the pipeline welder and the latest hydraulic technology.
PIPEWELDTRAC is a new development of the companies PPS-Pipeline Systems GmbH Services Quakenbrück GP Günter Papenburg AG, Betriebsteil Nordhausen A compact building site upright type which has been designed
More informationProduct Pierburg-No.: OE-No.: *) Electric in-tank pump E3TS / /.01.0 /.03.0 /.04.0 /.09.0 /.18.
PIERBURG Service information s Fuel supply Electric in-tank fuel pump Replacing the pump si 0068 GB MSI-PG 11.02 Vehicle: Manufacturer Model range Type Year of Power rating Capacity (design) construction
More information3.4 Wide Angle Nozzles
Product description Wide angle nozzles are ventilation end elements that are used for the distribution of inlet air at large distances. The flow direction of the inlet air is not only dependent on the
More informationALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
More informationThe World of Automatic Lubrication. perma Lubrication Systems for. Escalators
The World of Automatic Lubrication perma Lubrication Systems for Escalators Trouble-free operation with perma ECOSY The oil-lubrication system perma ECOSY is a preventive maintenance method for escalators.
More informationSample gas pumps P 2.3, P 2.3C, P 2.83, P 2.4, P 2.4C, P 2.84
Gas Analysis Sample gas pumps P 2.3, P 2.3C, P 2.83, P 2.4, P 2.4C, P 2.84 Gas analysis is key for safe and efficient system operation in the chemical industry, petrochemistry or biochemistry. Many of
More informationHeat Sealing Device Type HS-D hightec
Heat Sealing Device Type HS-D hightec Page 1/7 Heat Sealing Device Type HS-D hightec Page 2/7 Range of Application Due to the exceptionally high safety requirements in regard of changing filter elements
More informationseam p. 46 Standard blister hooks. Standard back bars. Standard brackets in stainless steel.
p. 46 seam 3 Standard blister hooks. 2 Standard back bars. 4 Standard brackets in stainless steel. This side hanging frame is made to order: a round tube with 25 mm diameter firmly welded with the brackets.
More informationHopper Loaders S Series
Hopper Loaders S Series English The design criteria and the construction modalities of these Single-phase Loaders put the S Series at the top of quality and performance. The workmanship, the body entirely
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One!
Millermatic 212 Auto-Set Issued Oct. 2008 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More informationALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
More informationALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
More information820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
More informationTrackless Mechanization for Cutting & Welding
Flexible Automation of Cutting & Welding Applications Flexible Automation von Schweiß- und Schneidarbeiten Automatización flexible para corte y soldadura Automatisation Flexible d applications de Soudure
More information212 Millermatic MIG Arc Welding Power Source,
Issued Jan. 2013 Index No. DC/12.46 212 Millermatic MIG Arc Welding Power Source, Auto-Set Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home
More informationBROEN UNiFlEx FiTTiNgs FOR special water OEN OEN ifl ifl FOR FOR PEC spec TER TER
BROEN UNIFLEX Fittings for SPECIAL water LAB Table of Contents Content Page Table of Content 2 BROEN UniFlex TM BASIC 4 Product Overview 5 Special Water Fittings Wall Mounted Fitting - Fully Recirculating...
More informationPolymeric membrane for roof waterproofing. Uses Roof waterproofing membrane for exposed flat roofs: Loose laid and mechanically fastened
Roofing Product Data Sheet Edition 06.2013 Version no. 01 Sikaplan -20 G Polymeric membrane for roof waterproofing Product Description Sikaplan -20 G (thickness 2.0(- 5 % / + 10 %)mm) is a polyester reinforced
More informationALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
More information1. Clean the cylinder.
TPE General Since the production process consists of a large number of complex operations, sometimes problems may arise. TPE is a living material, which ages and is affected by its environment. Your Dryflex,
More information