markilux 1650 Excellent design and well-thought-out mechanics Enjoy more of the evening with integrated halogen spotlights

Size: px

Start display at page:

Download "markilux 1650 Excellent design and well-thought-out mechanics Enjoy more of the evening with integrated halogen spotlights"

Ruby Hamilton
5 years ago
Views:

1 safe timeless beautiful Excellent design and well-thought-out mechanics Enjoy more of the evening with integrated halogen spotlights rated to wind resistance class 2 (corresponds to Beaufort 5) markilux

side view with awning retracted, face fixture side view with awning retracted, top fixture side view at a pitch of

brackets Design Features Technical Specification Optional Accessories presented with the IF Design Award for

even when the awning is closed coverboard with integrated brush, so that larger pieces of dirt and debris cannot be

tube ensures the highest stiffness and the best possible cover winding characteristics even at the largest widths

automatic weather controls) for straightforward and easy operation a dimmer allows you to adjust the lighting level

steel winding handle quality to get to grips with in the case of manual operation ease of use is ensured with the

2 side view with awning retracted, face fixture side view with awning retracted, top fixture side view at a pitch of 50 corrosion-resistant and technically proven; twin steel-link chains at the elbow joints wall sealing profile (optional), effective up to a maximum awning pitch of 15 front profile with integrated halogen light sources adjustable vertically through 90 folding arms with bionic tendon (optional) pitch adjustment via the fixture brackets Design Features Technical Specification Optional Accessories presented with the IF Design Award for excellent design folding-arm awning in a semicassette version; the dynamically rounded coverboard gives the awning the appearance of being fully cassetted elegant and robust front profile made of aluminium the warm lighting of the adjustable halogen spotlights integrated into the front profile provides for a wonderful atmosphere on the patio even when the awning is closed coverboard with integrated brush, so that larger pieces of dirt and debris cannot be drawn into the awning sturdy, round steel torque bar, 50 mm Ø, to prevent twist and deflection the 85 mm roller tube ensures the highest stiffness and the best possible cover winding characteristics even at the largest widths radio-controlled motor with radio remote control for ease of use hard-wired motor operation (optionally with automatic weather controls) for straightforward and easy operation a dimmer allows you to adjust the lighting level and therefore the atmosphere yourself in the case of manual operation it is supplied with a markilux stainless steel winding handle quality to get to grips with in the case of manual operation ease of use is ensured with the springassisted gearbox wall sealing profile to cover the gap between awning and wall awning available in non-standard RAL colours 220 Special features

Lounge colours Designer end caps in polished chrome off-white textured

metallic 5215 stone grey metallic 5215 06 07 avanna brown textured finish

metallic 5204 08 09 10 11 13 15 16 17 19 20 21 22 23 Colours may differ

3 Lounge colours Designer end caps in polished chrome off-white textured finish 5233 off-white textured finish stone grey metallic 5215 stone grey metallic avanna brown textured finish 5229 anthracite metallic 5204 avanna brown textured finish 5229 anthracite metallic Colours may differ slightly from those depicted in both hue and finish. Lounge colours 221

4 Dimensions and configuration options ) 200 2) 250 2) 300 2) ) min. 2) dimensions in cm awnings with 3 arms or a projection of 400 cm are only available with motor 2) please note the minimum widths! Operation / Drive Coupled units standard manual operation servo-assisted operation hard-wired motor io radio controls radio-controlled motor (433 z) junction roller 3) 4) Technical Information 4) see overview Bracket fixture range Dimensions and tolerances fabric range no. standard / sunvas perla motor 2 no. of folding arms 2 no. of brackets optional / / sunsilk perla FR sunvas snc 2 fields optional 3) for minimum widths please consult the section Covers sunsilk snc standard optional 2 2 housing tolerances awning cover width awning width projection + 5 / 15 mm ± 40 mm 260 mm awning cover length awning projection + 0 mm manual operation awning width min. minimum widths no. of bespoke arms projection no. of rolltex bearings 222 Dimensions and configuration options / Dimensions and tolerances width

5 Frame colours standard optional traffic white RAL 9006 grey brown, similar to RAL 8019 light ivory stone grey metallic off-white textured finish awning. Please refer cover sizes in the case of coupled units Pitch adjustment range: from 5 to 50 (to the horizontal). 04 Definition of projection: 05 Please consult the section Technical Information. RAL 1015 anthracite metallic 01 The width of the awning cover is always less than that of the and those with more than 2 arms to us. RAL 9016 metallic aluminium Additional information In the case of manual operation approximately 16 winding 5204 handle revolutions can be assumed per metre of awning projection It takes approximately seconds per metre to extend the 5233 avanna brown textured finish 5229 standard optional Coupled folding-arm awnings are available up to a max. of 10 A junction roller may not fit when the projection is the 13 on Installation, the arm separation table). If coupled awnings are fitted into a recess or reveal the 15 overall width of the coupled awning must be at least 6 cm less than the width of the opening to allow the awning to be iscellaneous coupled. standard halogen spotlights 11 mismatches are possible in the case of junction roller covers. maximum for the width of each awning. (see also the section polished chrome A coupled unit is available with junction roller. Pattern repeat Other end cap colour options 07 awning in the case of motor-driven units. 2 single units side by side, however only with a motor. non-standard powder-coated finish optional bionic tendon wall sealing profile light and wind sensor 21 insertable side blind 22 infrared heater 23 vibrabox / radio control light sensor Sunis WireFree 20 up to a maximum awning pitch of 15 Colours similar to those in the RAL chart. Colours may differ slightly from those depicted in both hue and finish. w w w.markilux.com Colour options / iscellaneous / Additional information

6 Fixtures, fittings and accessories Fixture brackets 100 face fixture bracket assembly 45 face fixture bracket assembly 90 top fixture bracket assembly 100 mm 45 mm 90 mm top fixture bracket assembly additional bracket for 3 folding arms 45 mm top fixture bracket assembly for central fixture 90 mm eaves fixture bracket assembly complete set height of flat plate: 150 mm 90 mm Spreader and spacer plates spreader plate A face fixture mm spreader plate B face fixture mm spacer plate for face fixture mm N.B! max. stacking height 200 mm spacer plate for face fixture mm N.B! max. stacking height 200 mm spacer plate for face fixture mm spacer plate for face fixture mm spacer plate for face fixture mm N.B! max. stacking height 200 mm spacer plate for top fixture 90 0 mm spacer plate for top fixture 45 0 mm spacer plate for top fixture mm N.B! max. stacking height 200 mm please refer to the section Technical Information. insert RAL colour code no 224 Fixtures, fittings and accessories

7 01 Stand-off brackets stand-off bracket for face fixture bracket stand-off bracket for face fixture bracket cover plate for installation with spacer plates and tand-off brackets in the case of external insulation mm cover plate for installation with spacer plates and stand-off brackets in the case of external insulation mm Accessories reducing bolt assembly 16 / SW mm in length reducing bolt assembly / SW mm in length reducing bolt assembly 10 / SW mm in length reducing bolt assembly / SW mm in length angled profile eaves fixture bracket mm spreader / backing plate assembly eaves fixture mm available by the metre, not pre-drilled machine finish (please refer to Eaves fixture with spreader / backing plate ) flat plate and angled bracket for eaves fixture not pre-drilled machine finish wall sealing profile available by the metre for installation example please refer to Face fixture with wall sealing profile , eaves fixture bracket height of flat plate: 150 mm stand-off strip for wall sealing profile available by the metre for installation example please refer to Face fixture with wall sealing profile eaves fixture bracket assembly height of flat plate: approx. 270 mm (please refer to Eaves fixture with spreader / backing plate ) adjustable eaves fixture bracket assembly (see Installation using adjustable eaves fixture bracket ) please refer to the section Technical Information. insert RAL colour code no Fixtures, fittings and accessories 225

8 Face fixture Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate [cm] FB [N] FB [N] mm mm mm mm mm mm 1 45 mm 1 45 mm 1 45 mm 1 45 mm B The pull-out force refers to the vertical centre to centre measurement between the fixture points of 90 mm. If this measurement is reduced to the minimum, the pull-out force increases by % in the case of compression-proof substrates and by 19% in the case of non compression-proof substrates. FB B WA awning width projection pull-out force per fixing point bracket quantity width no. of fixing points wall sealing profile face fixture bracket assembly 45 mm face fixture bracket assembly 100 mm WA 22, , , dimensions in mm 226 Face fixture

9 160 Face fixture with spreader plate A Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 76 mm. In the case of spreader plates a washer conforming to DIN 9021 must be used. FB BP DP B WA awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of spacer plates no. of fixing points wall sealing profile stand-off strip for wall sealing profile compression-proof substrate non compression-proof substrate [cm] FB [N] FB [N] mm mm mm mm mm mm 1 45 mm 1 45 mm 1 45 mm 1 45 mm BP DP B WA dimensions in mm Face fixture with spreader plate A 227

10 Face fixture with spreader plate B Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate [cm] FB [N] FB [N] mm mm mm mm mm mm 1 45 mm 1 45 mm 1 45 mm 1 45 mm BP DP B The pull-out force refers to the vertical centre to centre measurement between the fixture points of 350 mm. In the case of spreader plates a washer conforming to DIN 9021 must be used. FB BP DP B awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of spacer plates no. of fixing points dimensions in mm 228 Face fixture with spreader plate B

11 Face fixture with stand-off brackets Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 0 mm. In the case of stand-off brackets washers conforming to DIN 9021 must be used. FB B D awning width projection pull-out force per fixing point bracket quantity width no. of fixing points no. of stand-off brackets stand-off bracket for face fixture bracket assembly stand-off bracket for face fixture bracket assembly A compression-proof substrate A A-A min. 80 max. 300 non compression-proof substrate [cm] FB [N] FB [N] mm mm mm mm mm mm 1 45 mm 1 45 mm 1 45 mm 1 45 mm D D B A 62,50 A dimensions in mm Face fixture with stand-off brackets 229

12 Top fixture Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate [cm] FB [N] FB [N] mm 2 90 mm 3 90 mm 2 90 mm 3 90 mm 2 90 mm 1 45 mm 1 45 mm 1 45 mm 1 45 mm B The pull-out force refers to the horizontal centre to centre measurement between the fixture points of 80 mm. If the awning is fixed with 2 brackets per folding arm, the pull-out force can be halved. Place the brackets immediately to the left and right of the arm bearer. FB awning width projection pull-out force per fixing point bracket quantity width B no. of fixing points top fixture bracket assembly 90 mm top fixture bracket assembly 45 mm 90 17, , , dimensions in mm 230 Top fixture

13 Eaves fixture Torque [Nm Newton metres] for the fixture bracket in the immediate vicinity of the arm, shear force [N Newton] per fixing point according to EN 13561, wind resistance class 2 Torque The shear force is calculated on the basis of 2 fixing points per bracket, because depending on the roof pitch it cannot be guaranteed that 4 fixing points per bracket can used. d awning width projection torque value for the bracket in the immediate vicinity of the arm T FS B 0 90 no. of brackets shear force no. of fixing points Shear force [cm] d [Nm] FS [N] T B dimensions in mm Eaves fixture 231

14 Eaves fixture with additional spreader / backing plate Torque [Nm Newton metres] for the fixture bracket in the immediate vicinity of the arm, shear force [N Newton] per fixing point according to EN 13561, wind resistance class 2 Torque Shear force [cm] d [Nm] FS [N] T B By using the additional flat fixture plate, the shear force is reduced in comparison with conventional eaves fixture. d awning width projection torque value for the bracket in the immediate vicinity of the arm T FS B no. of brackets shear force no. of fixing points dimensions in mm 232 Eaves fixture with additional spreader / backing plate

15 Installation using the adjustable eaves fixture bracket Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 compression-proof substrate non compression-proof substrate [cm] FB [N] FB [N] mm 3 90 mm 2 90 mm 3 90 mm 2 90 mm 2 90 mm 1 45 mm 1 45 mm 1 45 mm 1 45 mm B The pull-out force refers to the measurement from the front to the rear fixture points of 0 mm. Washers conforming to DIN 9021 must be used. FB awning width projection pull-out force per fixing point B bracket quantity width no. of fixing points 7, , dimensions in mm Installation using the adjustable eaves fixture bracket 233

16 Installation dimensions at varying awning pitches WA , , WA wall sealing profile dimensions in mm 234 Installation dimensions at varying awning pitches

17 Bracket fixture range for awnings with 2 folding arms A LR B dimensions in cm W SB ZB [cm] A [cm] * ** 204* ** 254* ** 304* ** 370* ** 425* dimensions in cm BT T T 45 mm mm DE 45 mm 1 90 mm 2 2 DA 90 mm 2 3 If the brackets cannot be positioned in accordance with this table, make sure the actual measurements are noted on the order form! * Coupled units are only available with a junction roller in the standard widths, in the case of other widths please ask us. ** Please note the minimum widths! In the case of small awnings the brackets can only be fitted inside the arms, i.e. the position denoted by measurement A. A arm position BT bracket width DA eaves fixture DE top fixture projection T no. of brackets LR a rolltex bearing with accompanying bracket is always placed under a central seam (depends on the awning size) awning width B bracket fixture range SB standard width W face fixture ZB intermediate width Bracket fixture range for awnings with 2 folding arms 235

18 Bracket fixture range for awnings with 3 folding arms A B A LR LR B 1 1 SB 710 ZB [cm] A [cm] B [cm] * 228* dimensions in cm BT T W 45 mm mm 3 DE 45 mm 1 90 mm 3 DA 90 mm 4 If the brackets cannot be positioned in accordance with this table, make sure the actual measurements are noted on the order form! * A B BT DA DE T LR B SB W ZB Please note the minimum widths! Dimension A is only valid for standard arms! Coupled units are not available with junction roller. arm position arm position bracket width eaves fixture top fixture projection no. of brackets a rolltex bearing with accompanying bracket is always placed under a central seam (depends on the awning size) awning width bracket fixture range standard width face fixture intermediate width 236 Bracket fixture range for awnings with 3 folding arms

Spot lighting Spotlight distribution LP LA LA LP 3 LA LA LA LA Lamp quantity and separation at different awning widths 195 260 awning width no.

19 Spot lighting Spotlight distribution LP LA LA LP 3 LA LA LA LA Lamp quantity and separation at different awning widths awning width no. of spotlights spotlight separation Technical specification standard optional standard on/off switch radio-controlled dimmer LP 5 operating voltage 230 V, 50 z (2.5 A per transformer) spotlight power output 35 W light source OSRA Decostar 35S ( V) power supply cable mm 2 no. of transformers 1 piece in the case of 2 or 3 spotlights, 2 pieces in the case of 4 or 6 spotlights Spotlight operation front profile with integrated halogen light sources adjustable vertically through LP 3 5 LA [cm] LA Spot lighting 237

20 Installation dimensions at varying awning pitches Top fixture x W pitch (W) approx. height in mm (X) Face fixture x W pitch (W) approx. height in mm (X) Installation dimensions at varying awning pitches

markilux 1500 The semi-cassette awning with gas piston arm technology Something special and not just technically speaking

PATIO AND BALCONY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) markilux 1500 The semi-cassette awning with gas piston arm technology Something special and