GROW TO THE MAX. Gromax Enterprises Corporation. Page 58 Lathe & Accessories. Page 4 EDM & Accessories. Page 87. Page 113. Page 66 Machine Shop Supply

Transcription

1 GROW TO THE MAX Page 4 EDM & Accessories Page 12 Wire EDM Parts/ Tubing Page 40 Grinder & Accessories Page 58 Lathe & Accessories Page 66 Machine Shop Supply Page 77 Milling Machine & Accessories Page 87 Rotating/ Static Holder/ VDI Page 113 Rotating/ Static Holder/ Japan Series Page 155 CNC tool Holder/ CAT/BT/NT... Gromax Enterprises Corporation CATALOG NO. 0512

2 Table of Contents Sinker EDM Page CNC EDM 4 Conventional/ ZNC EDM 6 Small Hole EDM 8 Wire EDM 11 Chiller 11 Tubing/ Ceramic Guide 12 Sodick Ceramic Guide/Collet 13 Mitsubishi Wire EDM Parts 14 Sodick Wire EDM Parts 19 Fanuc Wire EDM Parts 21 Brother wire EDM Parts 24 Hitachi/ Charmills Wire EDM Parts 25 Japax Wire EDM Parts 27 Stainless tool/ Vises/ 3R Tooling 31 Brass Wire/ Zinc Coated Wire 33 Orbit Cut System 34 EDM Tool/ Fixture 35 Magnetic Chuck/ Holder 36 EDM Fluid 37 EROWA Tooling 38 System 3R 39 Grinder, Accessories, and Tooling Page Surface Grinder 40 Magnetic Separator 41 Monaset Tool & Cutter Grinder 42 JMC400 Cylindrical Grinder 43 G40 Universal Cutter & Tool Grinder 44 Diamond Wheel/ CBN Wheel 45 Grinding Wheel 47 Fixture, V-Block Vise, Magnetic Holder 49 Magnetic Chuck/ Chuck Controller 51 Chamfering/ Deburring, Lapping Machine 52 Tooling: Fixture, indexer, Sine Plate, 53 NC Vise Pin Cur off Machine, TORIT Dust collector 57 Lathe, Accessories, and Tooling Page Tool Room Lathe 58 Engine Lathe, Atlas Chuck 59 BTC Chuck, Power Chuck 65 ALORIS Tooling System 65 Machine Shop Supply Page Bandsaw 66 Cutter Grinder 67 Drill Grinder, Drill Sharpener 68 Tool Cutter Grinder 69 DRO 70 Hoist and Lifting Ring 71 Mag. Base, lubricant Pump, Tool 72 Trolley Measuring Instrument and Tool 75 Cyanoacrylate Adhesive 76 Milling Machine, Accessories, Page and Tooling Powerful Hydraulic Radial Drilling 77 Machine Drilling Machine Milling Machine 78 tapping Machine 79 Bed Type Mill/ Knee Type Mill 80 Milling Head Cartridge Spindle 81 Machine Shop Supply 82 Vises, Rotary Tables 83 Carbide Endmill 86

3 Table of Contents Fix Holder Page Fix Holders : DIN69880 Turning Holder - Square Tool 87 Turning Holder / B1~B8 88 Axial Tool Holder 89 Boring Bar Holder / Internal Coolant 89 Flow Collet Chuck -Straight ER Type/ TG 90 Type/ Morse Taper... VDI Keyless Drill Chuck 91 T1 Type Boring Bar Holder 91 PM Collet Chuck/ 92 PM Offset Boring Bar Holder Bushing Type Z/ Bar Puller 93 Driven Holder DIN5480 Axial/ Radial Driven Holders 94 DIN5482 Axial/ Radial Driven Holders 98 DIN1809 Axial/ Radial Driven Holders 102 Spur Coupling IT Axial/ Radial Driven Holders 105 Spur Coupling MT Axial/ Radial Driven Holders 108 HAAS Axial/ Radial Driven Holders 112 Mazak Live Tooling 113 Turning Tool Holder/ Collet Chuck 117 VDI Holder for SQT CNC Lathe 118 OKUMA Tool Holder 112 Driven Holders Boring Bar Holder 126 MURATEC Axial/ Raidal Driven Holders, Boring Bar 129 Holder NAKAMURA Axial/ Raidal Driven Holders 131 Boring Bar Holder 132 TAKAMAZ Axial/ Raidal Driven Holders 133 Boring Bar Holder 134 STAR Axial/ Raidal Driven Holders 135 Boring Bar Holder 135 Page CITIZEN Axial/ Raidal Driven Holders 136 Boring Bar Holder 136 DAEWOO Axial/ Raidal Driven Holders 138 MORI SEIKI Axial/ Raidal Driven Holders 140 MIYANO Axial/ Raidal Driven Holders 143 WASINO Axial/ Raidal Driven Holders, Turning Holder 144 Block/ Boring Bar Holder Okuma Style/ HAAS Style 147 MORI SEIKI Style 148 ROMI Style 148 Okuma HOWA Style, Mazak Style 149 CNC Tooling System Angle Head 150 HSK Holders for Turning Mills 150 Boring System Deep Hole Boring Holder 151 Boring Holder/ CAT, BT 152 Collet SD Collet/ TG Collet/ ER Collet 153 Collet Chuck ER Collet Chuck/ BT, CAT, HSK, SK 154 Others: End Mill Holder/ BT, CAT, HSK, SK 155 WER Tapping Attachment/ BT, CAT, SK 156 Morse Taper Holder/ BT, CAT, SK, HSK, NT, 157 DIN2080 Shell Mill Holder/ BT, CAT, HSK 158 Retension Stud 159 Face Mills/ Shell End Mills 160 Machine Shop Supply. Drill Chuck 161 CNC Keyless Chuck/ Drill Chuck 162 Ball Bearing Drill Chuck, Locking Fixture, others. 162

4 EDM & ACCESSORIES GROMAX CNC EDM CNC Series Machine These machines allow a new program to be created while another program is being executed From straight line, circular arc, helix, incremental, absolute and 3 axes coordinates can be easily interchanged The most unique operating modes allow you to get the fastest cutting speed, least electrode wear and fi nest surface Many friendly operation functions - systematically discharge examples, auto discharge process, cutting graphics preview.. immediately check executable program and easily preview 2D, 3D graphics C axis and ATC (auto tool changes) can be chosen optionally 4 complete CNC axes with Heidenhain TNC416 Controller Gromax Enterprises Corporation offers you optimum reliability & performance that has been gained through 20-year experience LINEAR GUIDE WAY and BALL SCREWS are used on Gromax column type and all CNC EDM machines Fuzzy Logic Control Optional Accessories: 1) 3R C Axis C axes are primarily intended for indexing and for movements synchronized with the machine, such as cutting threads and spirals, but they can also be used for machining with a rotary electrode. CNCP130+E300h Ram Type: CNCP36+E75h (36 x22 tank) CNCP50+E100h (50 x28 tank) Column Type: CNCP60+E150h (60 x35 tank) CNCP70+E150h (70 x43 tank) CNCP80+E150h (80 x45 tank) CNCP110+E300h (110 x59 tank) CNCP130+E300h (130 x60 tank) CNCP50+E100h shown 2) 3R Automatic Tool Changer ATC: 3R Marco Combi Linear Changer with 6 positions for Macro Junior holders. Can also be loaded with Marco holders in every second position of the magazine or a mixed load of Marco and Macro Junior Holders. Changer movements are produced pneumatically, whilst rotary and vertical motions have a hydraulic damping function to ensure exact travels. Every movement of the changing arm is monitored by sensors in the form of end-position switches or magnetic contacts. CNCP130-E300h shown Specification: CNCP50+E100h Table 29.5 x17.6 Travel XxY 18 x14.5 Work Tank 50 x28 x19 Back slide travel 13 Quill travel 14 Max dist. table top to 17.5 electrode plate surface Dielectric reservoir x28 x20 Packing dimension 34 x54 x85 3)4th Axis (refer to Yuasa Programmable Rotary Table with UDNC-M1 controller DMNC 170 POR center ht:5.12 DMNC 220 POR center ht:6.30 DMNC 280 POR center ht:7.48 DMNC 5C POR center ht: Rotary Table 3R Magazine Fork Macro for linear changers 220 Shown 5C Style s 5C Shown 3RCAXIS POR 3RATC POR For AC & DC Servo

5 GROMAX ZNC EDM Z-axis programmable EDM The ZNC series starting at See page 4 & 5 for ZNC EDM prices. Fuzzy Logic Control EDM & ACCESSORIES LINEAR GUIDE WAY and BALL SCREWS are used on Gromax column type & all CNC EDM machines (column type) ZNC110+E300 Machine Base Ball screw standard on all 3-axis X, Y, and Z. For extra smooth movement. Meehanite casting, V-fl at turcite coated ways. DC Servo motor drive. Max workpiece from 1,500 ~ 22,000 lbs. ZNC Power Generator Heavy Duty 50~300 Amp. power supplies Standard 3-Axes Digital Readout System built-in Auto depth control Memory capacities store up to 100 sets of EDM parameters. Each consists of 10 steps. Computer shift from one step to the next automatically to eliminate operator stand-by. Fuzzy Logic System offers the ultimate security by monitoring machining condition to prevent workpiece from arcing. Self adjusting parameters compensate machining condition automatically to bring out the best possible fi nish. Both copper and graphite electrode materials cut fast and accurate Deep hole machining on-screen programming Low electrode wear; maintenance free Other Custom-Made EDM s Available Long X-axis Travel Type Professional EDM Machine Tool Repair/Services Picture shows OLD Cincinnati EDMs retrofitted with brand new Gromax power supply. More than 25 years experience in service and rebuilding of EDM equipment such as ELOX, Cincinnati, Hansvedt, Eltee Pulsitron, Japax, Charmilles, and most Taiwanese imports. As well as many other types of Industrial Machinery & Control Systems. Basic labor charges start at reasonable rate and all work is fully guaranteed. Now, for a limited time only, we are offering 10% off our already low price for the first-time customers. Other services available include: *Design + prototyping of specialized machinery & Sensing devices for custom applications. *Replacement of OBSOLETE EDM power supplies. *Custom + Turnkey Systems. *Service Area: Unites States, Mexico, Central America, and Canada. TWIN-HEAD EDM Twin Z-Axis Type

6 EDM & ACCESSORIES GROMAX ZNC EDM / Conventional EDM (Ram Type) Ball screws are standard features from model P26+E50 and up! Reliability Begins with Quality All Gromax machine frames are made of MEEHANITE casting for maximum rigidity & accuracy X-Y slideways are hardened and ground. V-Flat design and faced with " TURCITE-B" for smooth sliding and wear resistance Table locks for X-Y are of the non-distortion type Fuzzy Logic Control (ram type) P26+E75 (ram type) ZNC46+E100 MACHINES ZNC26/P26 ZNC46/P46 ZNC56/P56 TABLE Dimensions x x x19.69 Longitudinal & Traversal Travel x x x19.69 Max. Work Piece (LxWxH) 30 x 19 x x 24 x x 35 x 23 Max. Work Piece WT Lbs 3300 Lbs 8800 Lbs WORK TANK (LxWxH) Inside Dimension 31 x 20 x x 25 x x 36 x 24 WORKHEAD Backslide Travel Quill Travel /13.78 * Max. Distance Table Top to Electrode Plate Surface Max Electrode Wt (lbs) PACKING DIMENSION (LxWxH) 57 x58 x87 58 X 57 X x70 x110 Net Weight 2424 Lbs 3520 Lbs 6900 Lbs DIELECTRIC RESERVOIR Outside Dimension (LxWxH) N/A x x x71 x24 53 Gal 79 Gal 262 Gal Cartridge Filter Net Weight N/A 200 Lbs 660 Lbs Packing Dimension (LxWxH) N/A x39.37 x x79 x32 GENERATOR E75 E100 E100 Maximum Machining 75A 100A 100A Current Power Input 9KVA 10KVA 10KVA Practical Material 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H Removal Rate W/O Wear Maximum Material Removal Rate 2.1In 3 /H 2.9In 3 /H 2.9In 3 /H Max. Electrode Wear 0.5% 0.5% 0.5% Best Surface Finishing U/Rmax Generator Net Weight 500 Lbs 550 Lbs 550 Lbs Packing Dimension (LxWxH) 35x29x79 Conventional EDM P26+E75 P46+E100 P56+E100 NA ZNC ZNC26+E75 ZNC46+E100 ZNC56+E100 All Gromax Conventional EDM machines are equipped with 3 axis DRO.

7 EDM & ACCESSORIES GROMAX ZNC EDM / Conventional EDM (Column Type) Ball screws are standard features from model P26+E75 and up! Fuzzy Logic Control Fuzzy Logic Control (column type) ZNC60+E100 (column type) ZNC110+E300 MACHINES ZNC60/P60 ZNC70/P70 (ZNC62/P62) ZNC80/P80 (ZNC66/P66) ZNC110/P110 (ZNC76/P76) ZNC130/P130 (ZNC86/P86) TABLE Dimensions x x x x x39.37 Longitudinal & Traversal Travel x x x x x39.37 Max. Work Piece (LxWxH) 57 x 34 x x 42 x x 45 x x 58 x x 60 x27 Max. Work Piece WT Lbs Lbs 13000Lbs 22000Lbs Lbs WORK TANK (LxWxH) Inside Dimension 58 x 35 x x 43 x x 46 x x 59 x x 61 x 28 WORKHEAD Quill Travel / * 17.7 /23.62 * Max. Distance Table Top to Electrode Plate Surface /38.58 */48.42 * /34.64 */ * 37.8 /43.7 */49.6 * Max Electrode Wt (lbs) PACKING DIMENSION (LxWxH) Machine Base 81 x70 x x92 x x98 x x90 x x 89 x 107 Head & Shoulder - 90 x40 x x46 x x36 x x41 x100 Work tank x72 x x85 x79 Net Weight 7700 Lbs Lbs Lbs Lbs Lbs DIELECTRIC RESERVOIR Outside Dimension Tank x54.2 x x74 x x50 x x61 x x65 x72 Tank x54.2 x x 76 x x50 x x61 x x 71 x Gal 490 Gal 529 Gal 792 Gal 910 Gal Cartridge Filter Net Weight 660 Lbs 990 Lbs Lbs 1100 Lbs Lbs 1760 Lbs+1760 Lbs 2200 Lbs Lbs Packing Dimension (LxWxH) 64.5 x62.2 x x76 x43 (x2pcs) 123 x57 x82 (x2pcs) 129 x69 x89 (x2pcs) 142 x 78 x 85 (x2pcs) GENERATOR E100 E150 E150 E300 E300 Maximum Machining 100A 150A 150A 300A 300A Current Power Input 10KVA 15 KVA 15 KVA 30KVA 30KVA Practical Material Removal Rate 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H W/O Wear Maximum Material Removal Rate 2.9In 3 /H 5.12In 3 /H 5.12In 3 /H 7.68In 3 /H 7.68In 3 /H Max. Electrode Wear 0.5% 0.5% 0.5% 0.7% 0.7% Best Surface Finishing U/Rmax ~ ~ ~ ~0.5 Generator Net Weight 550 Lbs 650 Lbs 650 Lbs 1450 Lbs 1450 Lbs Packing Dimension (LxWxH) 47 x32 x79 68 x 40 x88 68 x 40 x88 68 x 40 x90 68 x 40 x90 Conventional EDM P60+E100 P70+E150 P80+E150 P110+E300 P130+E300 NA NA NA NA NA ZNC EDM ZNC60+E100 ZNC70+E150 ZNC80+E150 ZNC110+E300 ZNC130+E300

8 EDM & ACCESSORIES GROMAX Super Drill EDM Please visit for used EDM and great saving EDM. SD20P shown SD24P shown SD16P X-Y slideways are hardened and ground V-Flat design and faced with TURCITE-B for smooth sliding and wear resistance SD16P shown SD20P SD24P Maximum 50 amps power current New and Improved "P" system Drilling 0.039"(1.0 mm) through 1" thick steel in less than 35 seconds Suitable for drilling through steel, carbide, aluminum and any other conductive material Fast and accurate deep hole drilling application with capacity from " "(0.2 mm mm) in diameter or bigger capacity with 120amp power supply User friendly control panel interface, minimum skill required to operate New Panel Fully Digital Panel 3-Axis DRO & Auto Depth Control EDM Parameters Save & Read Can Be Mounted on Column Control Panel Multiple display functions for Dimension, EDM parameter and machining depth setting Machining stability adjustment: Fine tune and stabilize machining conditions result in fi ner surface fi nish Inch/metric conversion " resolution Auto quill retract Center positioning Machining time timer EDM parameters recall Edge fi nd EDM parameter memory bank stores up to 480 different settings for steel, carbide, and aluminum. Some parameters are preloaded in memory, user can use these parameters as reference for testing, editing, and recording new data accordingly. B: EDC65K D: EDC30 F: EDC60U A: EDC30K C: EDC15 E: EDC30U GROMAX Drill Chuck (optional) A B C D E F Key Type (0.3mm~3.0mm) : EDC30K Key Type (0.3mm~6.5mm) : EDC65K Keyless Type (0mm~1.5mm) : EDC15 Keyless Type (0.3mm~3.0mm) : EDC30 Keyless Type (0.3mm~3.0mm) : EDC30U *For any Taiwanese Drill EDM Keyless Type (0.3mm~6.0mm) JT1 : EDC60U SD16P Test Burn Table (through hole): Depth Workpiece Electrode Tube Machine Time Brass Tubing 1 Steel 1.0mm SD32 33 sec 0.5 Steel 3.0mm SD32 58 sec Steel 0.7mm SD20P/ 16P 40 sec Aluminum 0.7mm SD20P/ 16P 30 sec Steel 0.2mm SD20P/ 16P 90 sec 0.79 Steel 0.4mm SD20P/ 16P 34 sec 1 Steel 1.0mm SD20P/ 16P 35 sec SD20P SD24P SD16P Range of electrode 0.2mm ~ 6mm 0.2mm ~ 6mm 0.2mm ~ 6mm Table size 16 x x x 8 Max. workpiece size 25.5 x16.5 x x20 x x 14 x 14 Table travel (X, Y) 11.8 x x x 8 RAM backslide NA Guide travel 4 4 N/A Quill servo travel Dielectric capacity 5.3 Gallon 5.3 Gallon 5.3 Gallon Max. power rating 4KVA 4KVA 4KVA Max. current 50 AMP 50 AMP 50 AMP On/ Off time setting 32 Steps 32 Steps 32 Steps Peak current setting 16 Steps 16 Steps 16 Steps Stability setting 10 Steps 10 Steps 10 Steps Work load 400 LB NA 800 LB Layout (L x W x H) 55 x 55 x x x 55 x 91 Net weight 1100 LB 1430 LB 1950 LB Machine structure Dovetail table travel Dovetail table travel V/Flate turcite coated table way Standard Accessories: 3-axes Digital Readout System Auto-Depth Control 50 Amps. Power Current Use distilled water as dielectric 1.0 MM Ceramic Guide (1 pc) 1.0 MM Brass Tubing (10 pcs) Work Lamp (1 pc) Tool Box & Tools (1 set) Coolant Pump & Tank (1 set) Plastic Shield (1 set) High Pressure Pump : HPP.CK

9 GROMAX Micro Drill EDM Save & recall machining data: steel, carbide & aluminum. Ball screws and slide way on X, Y & Z axis, Manual back slide Table type EDM drill for small work pieces. Newest power supply allows for small holes. Drilling capacity:from 0.03mm to 1.5mm ( ~0.059 ). (0.0012, carbide electrode.) MD20 is good for R&D laboratory. Inch/ Metric conversion, 1/2 function & machining timer, Edge fi nder, Auto depth control and retrace. 3 axes DRO MD20 of drilling 0.03mm~1.5mm Table size 8.8 x 8.8 Max. workpiece size 12 x 12 x 6 Table travel (X, Y) 8 x 4 RAM backslide 5.3 Quill servo travel 10.2 Dielectric capacity 7 Gallon + 7Gallon Max. power rating 1.5 KVA Max. Current 15 amp Work load 110 LB Layout (LxWxH) 56 x56 x79 Gross weight 1,500 LB SD-43 shown MD20 MD20 shown Machining Time: 15 min. Machining Time: 6 min. Machining Time: sec. EDM & ACCESSORIES Workpiece: Carbide CD650 76mm (2.99 ) Electrode Dia:.5mm (0.019 ) Copper Tube Hole Dia.: Top.58mm Bottom.56mm (0.023 / ) Workpiece: Carbide VD 20 11mm (0.43 ) Electrode Dia:.2mm ( ) Copper Tube Hole dia.: Top.28mm Bottom.27mm / ) Workpiece: Electrode Dia: Hole dia. Stainless steel, 0.3mm (0.012 ).05mm( ) Copper Tube.07mm( ) (SD-32) Maximum stability of workhead feed 60 Amps. maximum machining current Heavy duty stainless work table Auto depth control Super fast speed; low electrode wear One V one fl at, Turcite B coated slide ways Micro computer control, MOS-FET special circuit design Maximum distance between table surface and electrode holder: Micro computer Control Specifications SD-32Y SD-43 Work Table Size (L x W) x x Maximum Work Piece (L x W x H) x x Maximum Travel (X x Y) x x Quill Servo Travel Z Backslide Travel Z Manual Guide Holder Travel Dielectric 5.26 Gal. x 2 Gal. Dielectric Ionized Water Ionized Water Maximum Workpiece Weight 1320 lbs. lbs. Machine Dimensions (L x W x H) x x x x Power Power input 3 KVA 3KVA Supply Max. Machining Current 60A 60A On Time 12 Steps 12 Steps Off Time 10 Steps 10 Steps Peak Current Setting 16 Steps 16 Steps SD-32Y shown GROMAX Portable Drill EDM PD-16 (PD-16) Maximum stability of workhead feed 120 Amps. Max. machining current Super fast speed; low electrode wear Can be moved to location for diffi cult application Micro computer control, MOS-FET special circuit design Distance between table surface and electrode holder: High Pressure Rotary Spindle (Drill Chuck Type) : HPRS 0.3~0.5/0.5~1 1~2/ 2~3/ 3~4 4~5/5~6mm High Pressure Rotary Spindle (ER Collet Chuck Type with ER16 collet set of 7) : HPRS.C High Pressure Pump : HPP.FT PD-16A (60amp.) PD-16B (120amp.) High pressure pump included Drill EDM Filter : FLT-SD High Pressure Pump : HPP.CK

10 EDM & ACCESSORIES SDNC16P with Tool Changer Shown SDNC60P SDNC16P Machine Only w/ auto tool changer w/ 4th axis Machine can be programmed for circular arrays, rectangles and has a fourth axis for drilling metal sections such as robs, tubes and other shapes ; Addition of rotary indexer is necessary for this operation Auto Edge fi nder is standard with this machine Can do drill production quickly CAD/CAM generated programs can be downloaded, by Ethernet work, RS232 or Floppy disk De-ionized water should be used With on line help, it s easy to do programming by G/M code Linear scale, enhances long term operation and excellent accuracy EDM parameters stored and recall by: type of electrode, size of electrode & material of work piece Auto Electrode Change (AEC) is possible to adapt on this machine. (optional) Multiple coordinate display, and full screen display of machining monitor and position Auto program restart function, middle start, Program graphic check function, with graphic and machine bounded Auto electrode wear compensation, do not need to program with electrode wear and guess how much electrode wear is. It automatically measures the electrode wear and compensates into the program Manual Data Input (MDI) function, after tested the program may save the program as a regular fi le Protection function while electrode touch work piece machine will stop There are 6 coordinates in this system, as work piece reference position Standard Accessories: Paper fi lter 10μm (1pc) Ceramic guide 0.5mm, 1.0mm (1ea) Electrode tubes 0.5mm, 1.0mm (40ea) Electrode holder 0.3~3.0mm (1pc) Work light (1pc) Tool kit and tool box (1set) Back up program (1 CD-ROM) Optional Accessories: Auto fi ltering system Electrode tubes Guides Keyless chuck 0~1.5mm Keyless chuck 0~3.0mm DRAM memory IC Auto electrode changer 16pcs 4th axis with linear motion 4th axis with rotate function SDNC30P SDNC16P SDNC60P SDNC80P Table size 20 x x9 28 x x35.4 Servo travel (X,Y) 16 x12 12 x8 24 x x31.5 Servo travel Z Back slide travel C null Manual move by motor drive /Program by servo (optional) Distance between 1.57 ~ ~ guide & table Table load 1100lbs 440 Lbs. 660 Lbs. 660 Lbs Max. work piece size 27.6 x23.6 x x16.4 x x24 x12 32 x24 x12 Net weight 3300 Lbs Lbs Lbs Lbs Lay out (WxDxH) 67 x55 x82 48 x44 x92 84 x64 x92 84 x78 x90 of fl uid 7.96Gal 5.3 Gal 13.2 Gal (26.4 Gal optional) Packing size 86 x17 x86 56 x56 x x72 x x90 x83 Electrical Power input 200,220,380,415,440(575) V,3 Phase, 50/60 Hz Max. power ration 4KVA (6 KVA) Max. EDM current 25+25(optional) Amperes Min. command unit (0.001mm) (0.001mm) (0.005mm) (0.005mm) Resolution (0.001mm) (0.001mm) (0.005mm) (0.005mm) Feed back unit 1μ Linear scale 1μ Linear scale 5μ (with 1μ Linear scale) 5μ (with 1μ Linear scale) Manual speed 4 speed (Slow, Middle, High, Rapid) by parameter setting Program axis 3 axis 3 axis stand/ 4 axis (optional) EDM parameter By selection work piece, electrode material & size of EDM parameter On line help Standard Graphic function Standard Monitor 10.4 inch TFT or 14 Inch color CRT SDNC16P Machine Only w/ auto tool changer w/ 4th axis Automatic Electrode Changer (16 station Changer) for model SDNC16P. Controller CPU Pentium Monitor 14 CRT or LCD FDD 3.5 Floppy Disk HDD Suitable size Port RS-232 standard Keyboard Keypad, Ext. keypad socket DRAM Suitable for system running ICON Edit Standard On-Line Help Standard Auto-Restart Standard Edge Finder Standard EDM Parameters 600 Linear Motion Interpolation Rapid Feed Standard Circle Motion Interpolation Sub-program Call Call sub in fi le Print Program Printer port Network (Ethernet) Optional Workpiece Rotate Standard Program Rotate Standard Graphic with Bounded Standard Touch Protection Standard Coordinates G54 to G59

11 EDM & ACCESSORIES SPECIFICATIONS Submerged Type MACHINE W-V380 W-V500 W-V650 W-V750 W-V1280 List Max. Work 850x500x255mm 950x600x255mm 1050x800x315mm 1150x1200x345mm Piece Size 33.5 x19.6 x x23.6 x x31.5 x x33.5 x x47.2 x13.6 Max. Work 300kg/ 660 lbs 400kg/ 880 lbs 500kg/ 1100 lbs 600kg/ 1320 lbs 3000kg/ 6600 lbs Piece Weight Table Travel/ 380x280mm 500x300mm 650x400mm 750x450mm 1200x800mm XxY 15 x x x x x31.5 U & V Axis 120x120mm 120x120mm 160x160mm 160x160mm 260x260mm Travel 4.7 x x x x x10.2 Z Axis Travel 260mm 260/ 320mm 320mm 350/ 500mm 320mm(optional) / / (optional) Wire Diameter 0.1mm~0.3mm 0.1mm~0.3mm 0.15mm~0.3mm 0.15mm~0.3mm 0.15mm~0.3mm Number of 5 axis AC servo Motor Axes Control Maximum Taper Angle Dimensions of Installation Machine Weight 26 degree/ 100mm (Wide diamond guide and nozzle) 3245x2455x2050 mm 2800 kg/ 6160 lbs 3245x2455x2050 mm 33 degree/ 100mm (Wide diamond guide and nozzle) 3370x2560x2220 mm 3438x2560x2220 mm 4200x3800x2500 mm 127.8x96.7x x101x x101x x149.6x kg/ 7040 lbs 4000kg/ 8800 lbs 4500kg/ 9900 lbs 9500kg/ lbs Individual Wire EDM Catalog is available upon request. GROMAX Chiller -OIL Series Oil Cooler for Wire EDM Application: CNC wire cutting machine High speed spindle Laser cutting machine PCB drilling machine Electrode cooling of spot welder Plastic injection molding machine Printing machines Semiconductor manufacturing equipment Medical instrument Feature: Precisely control temperature of industrial machines, improve production effi ciency and reduce cost. Uses stainless steel for water circuit. Multi-safe devices are equipped to secure the operator and cooler safety. No need for cooling water tower. Item/ HWV-250PS HWV-400PS HWV-600PS HWV-750PS HWV-1000PS HWV-2RPS HWV-3RPS HWV-4RPS HWV-5RPS Coolingcapacity KCAL/H 50/60 Hz 840/ / / / / / / / /15000 W 50/60Hz 980/ / / / / / / / /17500 BTU/H 50/60Hz 3300/ / / / / / / / /60000 Temp. A Fixed temperature control type (setting range 10~40 o C) controller B Differential temperature control type (tracing room/machine body temperature, setting range -10 ~ +10 o C) Use Ambiet temp.xc 10 ~ 40 o C range Oil temp.xc 10 ~ 30 o C Power source 3X 200 ~ 230V 50/60 Hz Motor W 500/50 820/ / / / / / /750 Compressor/Pum/Fan Heat dissipation Air cooled Pump W Max. Flow Rate 27/31 32/38 58/75 58/75 100/150 L/min Max. Liquid Lift M 3.1/ /5.4 28/40 28/40 28/40 Inlet pipe diameter PT 1/2" 3/4" 1" 1-1/4" Outlet pipe diameter PT 1/2" 3/4" 1" 1-1/4" Dimension WDH mm 360x440x x520x x520x x450x x750x x735x1400

12 EDM & ACCESSORIES TUBING & WIRE Tubing & Guide GROMAX Precision Ceramic Guide and Tubing Spare Parts for EDM Drilling Machine Special Precisely fi t for ceramic guide Less Electrode ware, cut faster 16 (400mm) tubing is more economical than 12 (300mm) GROMAX Precision Ceramic Guide and Tubing Spare Parts for EDM Drilling Machine D Ultra Precise Electrode Tubes: 400mm/ length OD Tolerance: +0, mm (+0, ) Available in brass & copper Thick-wall design provides complete counter boring for deep hole drilling Capillary Extrusion- Special manufacturing technology offers excellent straightness & concentricity Value Saving: Save more when you order 4~9 packs receive 10% off 10 packs or more receive 15% off OD Tolerance: +0, mm (+0, ) CODE SIZE (mm) INCH Equivalent Ceramic Guide : CG Brass Tubiing : BR Copper Tubing : CP Multi-Channel Brass Tubing : MCBR 1.22 ID Tolerance: , -0 mm ( , -0) Hole pattern for CG010 ~ CG350 D=5.98mm/ CG360 ~ CG600 D=8.98mm/ Multi-Channel Copper Tubing : MCCP Micro EDM Tubing Thick Wall Tubing pcs /pack 40pcs /pack 20pcs /pack 10pcs /pack * 200mm Length **300mm Length 10pcs /pack

13 TUBING & WIRE Tubing & Guide EDM & ACCESSORIES Copper Tungsten Rod CODE SIZE (mm) INCH Equivalent Ceramic Guide : CG Brass Tubing : BR Copper Tubing : CP Multi-Channel Brass Tubing : MCBR Multi-Channel CopperTubing : MCCP Size 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0mm tube also available. Please call for more details. Ceramic Guide and Collet for Sodick Machine Spare Parts for EDM Drilling Machine Code unit:mm SRK (K1C GUIDE) SRKC (COLLET) GOMS (GROMMET) SRKS (Spacer) pcs /pack 10pcs /pack 10pcs /pack We have: OD( 1 ~ 30mm ) x LENGTH( 100mm, 175mm & 200mm ) Tungsten copper rod only. * Composition : CU:W = 25 ~ 30 : 70 ~ 75 * Specific gravity : 14.2g/cm3 * Hardness : 91 HRB * Electrical conductivity (IACS) 45% Metric size: 200mm length Diameter Size (mm) 1 CTR100 2 CTR200 3 CTR300 4 CTR400 5 CTR500 6 CTR600 7 CTR700 8 CTR800 9 CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR3000 Inch size: 8 length Diameter Size (inch) 1/8 CTR1/8 3/16 CTR3/16 1/4 CTR1/4 5/16 CTR5/16 3/8 CTR3/8 7/16 CTR7/16 1/2 CTR1/2 / EACH / EACH

14 EDM & ACCESSORIES Spare Parts for Wire EDM WIRE EDM Parts Wire EDM Spare Parts Diamond Guide Power Feed Contact Flushing Cup Connected Parts GROMAX Wire EDM Parts are made of the highest quality materials to assure consistent and lasting wear Exact tolerances are reached by each dimension fi nish ground Wire surfaces are polished for smoother movements These parts are for wire EDM from MITSUBISHI, FANUC, BROTHER, CHARMILLES, & JAPAX For Diamond Guide for MITSUBISHI WM101-1 WM102 WM104 WM107 WM109 WM111 WM113 WM117 WM122 WM101-2 WM103 WM106 WM108 WM110 WM112 WM114 WM120 WM124 WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM108 Size (mm) ø, L=11 Description Wire Guide Wire Guide Position Upper & Lower Upper & Lower Machine Original P/No. New SU, DWC-N, F (Manual) DWC-F1, G (Manual) X053C082G51 X053C082G56 X053C082G65 X052B040G64 X052B040G65 X052B040G66 Wire Guide Lower DWC-F, F1, G, H, H (SK2/AF) X053C188G54 X053C188G55 X053C188G56 Wire Guide Upper & Lower DWC-HA, H, H, H1, HA, C (Manual) X052B054G51 X052B054G52 X052B054G53 X052B054G54 X052B054G (NVT) Wire Guide Lower DWC-H, H, H1 (SK3/AF) X052B092G54 X052B092G55 X052B092G (NVT) Wire Guide Upper DWC-H, H, G (SK1, SK2, SK3/AF) Wire Guide Upper DWC-H, HA, SA, SB, SZ, AF-1 (SK/AF) -ceramic on coolant hole- Set Screw Upper DWC-N, F, F1, G (Manual/AF) X054D162G54 X052B102G53 X052B102G54 X052B102G (NVT) X052B240G50 X052B240G51 X052B240G52 (X052B123G53) X052B240G53 (X052B123G54) X052B240G54 (X052B123G56) (NVT) WM ø Die Guide A Upper DWC-G, F, F1, H, H (SK1, X054D171G54 SK2, SK3/AF) WM WM Eccentric Die Upper DWC-F, F1, G (SK1/AF) X053C136G52 X053C136G54 WM111 Die Holder Upper & DWC-G, H, H, H1, C, SA, SB, X053C245H (NVT) Lower SZ (SK3/AF, AF1; Maunal) WM112 Center Die Upper DWC-G, H, H (SK1, SK2, X053C229G51 SK3/AF) WM ø, Set Screw Lower DWC-H1, HA, SA, SB, SZ X053C628G51 L=2.5 (AF1) WM Set Screw Upper & DWC-H, H, H1, HA, SA, SB, X053C241G (NVT) Lower SZ, C (Manual) -ceramic- WM WM Wire Guide Lower DWC-H1, HA, C, CR, SA, SB, SZ, (AF1) -ceramic on coolant X052B241G51 X052B241G52 WM hole- X052B241G53 (X052B176G53) X052B241G54 (X052B176G54) WM X052B241G55 (X052B176G55) WM (NVT) WM Set Screw Upper DWC-H1, HA, SB, SZ (AF1) -inner side ceramic- X053C524G (NVT) WM WM WM WM WM WM Wire Guide Upper & Lower DWC-70, 90, 110, 200 (Old machine, Manual/AF) X053C012G54 X053C012G56 X053C012G57 Wire Guide Lower New SU, DWC-F (SK1/AF) X053C104G54 X053C104G55 X053C104G56 X053C153G55 SK3/AF) Die Guide B Upper DWC-H1, HA, SA, SB, SZ X053C508G51 (AF1) X053C508G WM Sub Guide Upper DWC-F, F1, G, H (SK1, SK2, WM WM WM129C-05 WM129C-10 WM129C Jet Nozzle Upper DWC-HA, SA, SB, SZ, SX, CX, FX, QA, RA,FA, P (AF2, AF3, AT) -ceramic- X054D826H06 X054D826H08 X058D054H (NVT) WM129A 0.75mm Jet Nozzle w/stainless housing and ceramic insert X054D826H07 WM125 WM126

15 WM129C WM131 WM133 WM130C WM132 WM134 Wire EDM Spare Parts WIRE EDM Parts WM WM WM WM WM WM WM WM WM WM WM Wire Guide Upper DWC-RA, FA (AT) X056C833G51 X056C833G52 X053C833G (NVT) Wire Guide Lower DWC-HA, SA, SB, SX, SZ, CX, FX, QA, RA, FA (AF2, AF3) X056C426G51 X052B243G62 X052B243G63 X052B243G64 X052B243G (NVT) Wire Guide Lower DWC-RA, FA (AT) X052B387G51 X052B387G52 X052B387G (NVT) WM134 Ring Lower DWC-HA, SA, SB, SZ, CX, FX, SX, QA (AF2, AF3) EDM & ACCESSORIES X204D293H02 Power Feed Contact for MITSUBISHI WM001 WM003 WM005 WMT005 WM009 WM002 WM004 WM005 WM008 Size (mm) Description Position Machine Original P/No. WM001 7x22x0.7 Power Feed Upper & DWC-G, H, N,C, CR, CS, X054D125H03 Contact Lower F, F1, G, H, H, H1, HA, SB, SZ (Manual) WM001S 7x22x0.7 Power Feed Upper & Upgraded WM001 X054D125H03 Contact Lower WM x22, ID:1.0 Power Feed Contact Upper DWC-HA, SB, SZ (AF1) X054D476H (NVT) WM002 7x22 Power Feed Contact WM002S 7x22 Power Feed Contact WM x16 Power Feed Contact WM x16 Power Feed Contact WM x3x27.5 Power Feed Contact WM005G 2.5x3x27.5 Power Feed Contact WM005L 2.5x3x27.5 Power Feed Contact WM006 16x9x7 Power Feed Contact WM007 16x17x7 Power Feed Contact WM008 10x6x8 Power Feed Contact WM x20 Power Feed Contact WM009G 24.5x20 Power Feed Contact Lower Size Description Position Machine Original P/No. (mm) WM130C-05 WM130C-10 WM130C Jet Nozzle Upper DWC-H1, HA, SA, SB, SZ (AF1) -ceramic- S684D898P14 S684D823P14 S684D898P61 WM131 Die Holder Upper DWC-H1, HA, SA, SB, SZ (AF1) X177B558H02 WM WM WM WM WM Wire Guide Upper DWC-HA, SA, SB, SX, SZ, CX, FX, QA, RA, FA (AF2, AF3) X053C834G51 X053C834G52 X053C834G53 X053C834G54 X053C834G (NVT) DWC-F, G, H, HA, SA, SB, SZ (SK/AF, AF1) -auto connection- X054D129H (NVT) Lower Upgraded WM002 X054D129H (NVT) Upper DWC-F, F1, G, H (SK/AF) X054D199H01 Upper-A for auto connection Upper DWC-F, F1, G, H (SK/AF) X054D216H01 Upper-B for auto connection Upper DWC-G, H, H, H1, HA, SA, X054D345H01 SB, SZ (SK/AF, AF1) auto (NVT) connection (standard) Upper DWC-G, H, H, H1, HA, SA, SB, SZ (SK/AF, AF1) auto connection (tin coated: for good current fl ow rate) Upper DWC-G, H, H, H1, HA, SA, SB, SZ (SK/AF, AF1) auto connection (long straight) Lower DWC70, 75, 80, 90, 100, 110, 200 N (Manual) Upper DWC70, 75, 80, 90, 100, 110, 200 N (Manual) Upper & DWC-H1, HA (Manual, for Lower thin wire) Upper & Lower Upper & Lower DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) -tin coated: for good curent fl ow rate- X054D345H (NVT) X054D345H (NVT) X054D024H01 X054D020H01 X054D186H02 X056C075H04 X056C075H04

16 EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts Flushing Cup for MITSUBISHI WM200 WM201-2 WM202B WM207 WM209 WM2101 WM211 WM203 WM201-1 WM202A WM205SET WM208 WM210 WM2102 WM212 WM215 Size (mm) Description Position Machine Original P/No. WM ø Water Nozzle Lower DWC-H. H. H1. HA. C X183C443H01 (Manual/AF) WM ø Water Nozzle Upper N X179D875H02 WM ø Water Nozzle Lower N X179D490H02 WM202A-4 WM202A-8 4.5ø 8ø Water Nozzle Upper DWC-G. H. H. C. H1. HA -with groove- WM202B 4ø Water Nozzle Upper DWC-G. H. H. C. H1. HA (Manual/AF) WM203-4 WM203-6 WM203-8 =WM202B 6ø =WM204 Water Nozzle Upper DWC-G. H. H. C. CA. H1. HA (Manual/AF) WM204 8ø Water Nozzle Upper DWC-H. H. C. H1. HA (Manual/AF) -plastic for G, H Series- WM205SET L=10, 20, 30, 50 Water Nozzle Upper (Set) DWC-G. H. H. C. H1. HA -long nozzle- WM207 4ø Water Nozzle Lower DWC-F1. G. H. H1. HA. C (Manual) -ditch acrylic- WM ø Water Nozzle Lower DWC-F1. G. H. H1. HA. C (Manual) -ditch brass- WM WM WM208-4 WM208-6 WM ø 6ø 4ø 6ø 8ø Water Nozzle Lower DWC-F1. G. H. H1. HA. C (Manual) -ceramic- Water Nozzle Lower DWC-F1. G. H. H (Manual/ SK1, SK2, SK3/AF) WM209 8ø Water Nozzle Lower DWC-F1. G. H. H. H1. HA.C (Manual/AF) WM210-4 WM210-8 WM WM WM WM WM211-4 WM211-6 WM211-8 WM212-4 WM212-8 WM WM WM WM WM215-4 WM215-8 WM WM216 WM217-4 WM217-6 WM ø 8ø 4ø 8ø 4ø 8ø 4ø, L=8 8ø, L=8 4ø 8ø 4ø 8ø 4ø 8ø 4ø 8ø OD: 65ø ID: 15.5ø 4ø 6ø 8ø Water Nozzle Lower DWC-H1. HA. SA. SB. SZ (AF1) -cut ceramic- Water Nozzle Upper DWC-H1. HA. SA. SB. SZ (AF1) Water Nozzle Lower DWC-HA. SA. SB. SZ. CX. SX. FX. QA. RA. FA (AF2, AF3, AT) -acrylic- Water Nozzle Lower DWC-HA. SA. SB. SZ. CX. SX. FX. QA. RA. FA (AF2, AF3, AT) -brass- Water Nozzle Lower DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) -ceramic- Water Nozzle Upper DWC-HA. SA. SB. SZ. SX. CX. FX30. FX-K, QA, RA, FA (AF2, AF3, AT) Nozzle Holder Upper DWC-HA. SA. SB. SZ. SX. CX (AF2, AF3, AT) X183C439H01 X183C439H (NVT) X183C439H (NVT) X183C439H01 X183C439H02 X183C439H03 X183C439H03 X053C491H01 X053C491H01 X054D209H11 X054D209H12 X054D209H11 X054D209H12 X054D209H13 X053C491H03 Water Nozzle Lower DWC-H1. HA. SA. SB. SZ (AF1) -cut acrylic- Water Nozzle Lower DWC-H1. HA. SA. SB. SZ (AF1) -cut brass (NVT) (NVT) X053C621H01 X053C621H (NVT) X183C378H01 X183C378H02 X183C378H (NVT) (NVT) (NVT) X054D881H03 X054D881H (NVT) X186C793H01 X186C793H (NVT) X186C793H03 X182B458H02 Water Nozzle Upper FX10. FX20 (AF3) X196C45AH01 X196C45AH02 X196C45AH03 WM216 WM217 WM204 WM2103

17 Connected Parts for MITSUBISHI For WM301 WM303 WM305 WM307 WM401C WM403C WM405C WM407C WM409C WM302 WM304 WM306 WM400 WM402C WM404C WM406C WM408C WM410C Wire EDM Spare Parts WIRE EDM Parts Size (mm) WM301 Isolator Plate Upper DWC-F1. G. H. H. H1. HA. C (Manual) -taper cut- Description Position Machine Original P/No. X053C162H (NVT) WM302 Isolator Plate Upper DWC-F1. G. H. H (Manual) X054D185G51 WM303 Isolator Plate Lower DWC-F1. G. H. H (SK1/AF) X053C228G52 WM304 Isolator Plate Lower DWC-SA. SB. SZ (AF1/AF2) X053B166G51 WM305 Isolator Plate Lower DWC-110H1, 200H1, 110HA, 200HA (Manual/AF) WM306 Isolator Plate Lower DWC-90H1, 90HA. 90C (Manual/AF) X053C443H (NVT) X053C314H (NVT) WM307 Isolator Plate Lower CX. SX (AF2, AF3) X056C110G51 WM308 Isolator Plate Lower FX10 (Manual/AF), FX1 X056C273G51 WM309 Isolator Plate Lower FX20. FX30 (Manual/AF) X056C356G51 WM310 Isolator Plate Lower FA10 (AT) X056C968G51 WM400 Aspirator Lower DWC-H1. HA. C. SA. SB. SZ X198D838H01 (AF1, AF2/Manual) -brass- WM400-1 Rectifi er Ring Lower DWC-H. H1. HA. SZ. C. SB. SA. SX. CX. FX. QA. RA. FA (AF1, AF2, SK3, AT, Manual) X194D998H02 WM401C 18x57 Pinch Roller Feed Section DWC-F. F1. G. H. H (SK1, SK2) CX: beginning period (AF3) -ceramic- WM402C 18x57 Capstan Roller Feed Section DWC-F. F1. G. H. H (SK1, SK2) CX: beginning period (AF3) -ceramic- WM403C 25x57 Pinch Roller Feed Section DWC-H. H1. HA. SZ. C. SB. SA (SK3/AF1, AF2) (Ceramic) WM404C 25x57 Capstan Roller Feed Section DWC-H. H1. HA. SZ. C. SB. SA (SK3/AF1, AF2) -ceramic- WM405C 32x57 Pinch Roller Feed Section DWC-H1. C. HA. SA. SB. SZ. SX (Manual/AF) Gear Type -ceramic- WM406C 32x57 Capstan Roller Feed Section DWC-H1. C. HA. SA. SB. SZ. SX (Manual/AF) Gear Type -ceramic- EDM & ACCESSORIES X054D257G51 X058D078G51 X054D256G51 X058D077G51 X054D413G51 X054D412G51 X053C779G51 X053C778G51 WM407C 18x57 Pinch Roller Feed Section FX (Manual/AF) -ceramic- X058D340G51 WM408C 18x57 Capstan Feed Section FX. QA (Manual/AF) X058D339G51 Roller -ceramic- WM409C 25x57 Pinch Roller Feed Section FA (AT) -ceramic- X055C008G51 WM410C 25x57 Capstan Feed Section FA (AT) -ceramic- X055C009G51 Roller WM420 Gear Feed Section DWC-C, H1, HA, SA, SB, X058D501H01 SZ, SX, FX, RA, FA (AF1, AF2, AF3, AT) -for WM405C & WM406C- WM420-1 Gear Feed Section for WM407C & WM408C X054D744H02 WM421C Roller Lower FX. QA. RA. FA (AF3, AT) -ceramic- X203C607H03 WM420 WM421C WM445 WM452 WM423 WM425 WM451 WM452-1 WM423 Aspirator Lower DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) WM425 Urethane Roller WM445 60ø Water Cover Upper DWC-H. H. C. H1. HA. SA. SB. SZ (for WM202, WM211) WM451 Cap Screw Upper & Lower DWC-N. F. F1. G. H. H. H1. C. HA (Manual) -for power supply block- WM452 Die Block Upper DWC-F1. G. H. H. H1. C. HA (Manual) -including WM451 and connector- WM452-1 Die Block Upper DWC-F1. G. H. H. H1. C. HA, CR, CA (Manual) WMS x 10 x16(thick) Urethane Roller for Tension Brake X053C920G51A (X053C829G54) Upper RA, FA (AT) X058D912G51 DWC - F, G, H, HA series X199D297H02 X179D323H02 X176C706H02 X176C706H02 X053C175G51

18 EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts Connected Parts for MITSUBISHI For WM453 WM453-2 WM454 WM456 WM458 WM460 WM501 WM453-1 WM453-3 WM455 WM457 WM459 WM470 Size Description Position Machine Original P/No. (mm) WM453 Die Block Lower WM453-1 Die Block Lower DWC-F1. G. H. H (Manual/ X176C610H01 AF) WM453-2 Stopper Lower DWC-G.H (Manual/AF) X184D271H06 WM453-3 Die Block Lower DWC-G. H (Manual/AF) -for arm parts- WM454 Die Block Lower DWC-H1. HA (Manual/AF) X177B046H03 WM455 Pulley B Lower DWC-F. F1. G. H. H (Manual) -including shaft, brass cover, bearing and screw- X602B845G51 WM456 Roller Lower DWC-H1. HA. SA. SB. SZ. SX. CX (Manual/AF) -with retaining ring- WM457 7ø Bearing DWC-H1. HA. SA. SB. SZ. SX. C.X (Manual/AF) -for WM456 R WM458 8ø Bearing DWC-F. F1. G. H. H. H1. HA. C. SA. SB. SZ. SX. CX. QA. FA. RA (Manual/AF) -for WM401C, WM403C, WM405C, WM407C R X183C442H (NVT)+ S922N040P07 S859N319P33 S859N319P31 WM459 Die Block Lower DWC-90C (Manual) X177B713H02 WM459-1 Plastic Cover Lower DWC-H1. HA (AF1) X198D777H01 WM459-2 Fixing Plate Lower DWC-H1. HA (Manual/AF) WM459-3 Cover Lower DWC-H1. HA (Manual/AF) X198D776H01 WM459-4 Wave Washer Lower DWC-H1. HA. SA. SB. SZ. S913N313P11 SX. CX (Manual/AF) -for WM456- WM459-5 Spacer Lower DWC-H1. HA. SA. SB. SZ. SX. CX (Manual/AF) -for WM456- X194D873H01 WM459-6 Retaining Ring DWC-H1, HA, SA, SB, SZ, SX, CX (Manual/AF) -for WM456- WM460 Clamping (Manual/AF) -for WM stainless- WM470 WM470-1 Power Feed Holder Power Feed Holder Lower Upper DWC-HA. SA. SB. SZ. CX. FX. RA. FA (AF2, AF3, AT) -for WM009- DWC-HA, SZ, SB, SA, SX, CX (AF2, AF3) S922N040P07 X189D690H04 X209D212H01 X208D405H01 WM501 Cutter Unit Cutter CX: end period. FX (AF3) X056C326G51 WM501-1 Fixed Plate Cutter CX: end period. FX (AF3) X058D376H01 WM501-2 Aspirator Cutter CX: end period. FX (AF3) X203C145H04 WM501-3 Detecting Cutter CX: end period. FX (AF3) X258D350H01 Nozzle WM502 Cutter Unit Cutter CX: beginning period. (AF3) X058D186G51 WM502F Fixed Blade Cutter CX (M/C) (=M502-1) WM502.MB Main Blade Main Blade for WM502 WM608V =WF501 Bearing FX, QA, RA, FA (AF3/AT) -for WM421C- P840F000P67 P840F000P69 (=M422) WMCT421 Insulator Tip for limit switch -ceramic- Switch Patent No. P421A030P000 WM502 WM501-1 WM501-2 WM501-3 WM502F WM608V

19 Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES Diamond Guide for SODICK Size (mm) Description Position Machine Original P/No. WS WS WS Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) - diamond WS100 WS101 WS WS WS Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) (dia: 0.22, 0.27, 0.32mm also available) -sapphire-(made in Japan) (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) WS102 WS103 WS WS WS Wire Guide Upper & Lower 150W. AP150. AW Series. EPOC BF250. BF275 (Manual) (dia:0.22, 0.27, 0.32mm also available) (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) WS WS WS Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (Manual: U&L/ AF: L)(dia: 0.22, 0.27, 0.32mm also available) (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) WS103L WS104 WS103L-08 WS103L-10 WS103L Wire Guide Upper & Lower A280L. 320L. AW. EPOC Series (dia: 0.32mm also available) -3mmø 87-3L long type (0.21) (0.26) (0.31) (0.32) WS105 WS WS WS Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AWT Die A)AWT Die A (dia: 0.22, 0.27, 0.32, 0.35, 0.4, 0.6mm also available) -sapphire (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) (0.35) (0.4) (0.6) WS WS WS Wire Guide Upper & Lower AP150 (Manual) -long type) WS106 (0.8mm) 0.21 Sapphire Guide Guide C (Sapphire) ID=0.8mm Power Feed Contact for SODICK WS001 WS003S WS005LS WS002 WS004S Size (mm) Description Position Machine Original P/No. WS001 18x10 Power Feed Contact Upper 1W. 150W. 330W. 453W. 654W. AP150. BF250. BF275. EPOC300. AW Series. (Manual) WS002 18x14 Power Feed Contact WS003S 16x10 Power Feed Contact WS004S 14x11x12 Power Feed Contact WS005LS 12.5x14x11.7 Power Feed Contact WS005LT 12.5x14x11.7 Power Feed Contact Upper & Lower 150W. 330W. 453W. 654W. 1WH. AP150. BF250. BF275. G3A. EPOC301. AW Series. (Manual) Upper 150W. 330W. 453W. 654W. 1WH. AP150. BF250. BF275. G3A. EPOC (Manual) -silver tungsten- Upper 150W. AP150. BF250. BF275. EPOC303. AW Series. E3 WS. BF250. E (Manual) -silver tungsten- Upper, Left Upper, Left AW BF250. BF275. EPOC E3WS (Manual) -silver tungsten- AW BF250. BF275. EPOC E3WS (Manual) -tungsten carbide (NVT) (NVT) (NVT) (NVT)

20 EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts WS005RS WS007S WS009S WS006S WS008S WS010 Size (mm) Description Position Machine Original P/No. WS005RS 12.5x14x11.7 Power Feed Contact WS005RT 12.5x14x11.7 Power Feed Contact WS006S 12.5x19x11.6 Power Feed Contact WS007S 10x10x20 Power Feed Contact WS008S 12x20.6 Power Feed Contact WS009S 10x8x30 Power Feed Contact WS x40x20 Power Feed Contact Upper, Right Upper, Right Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower AW BF250. BF275. EPOC E3WS (Manual) -silver tungsten- AW BF250. BF275. EPOC E3WS (Manual) -tungsten carbide- AW BF250. BF275. EPOC Series. E3WS -silver tungsten (NVT) (NVT) (NVT) 150W -silver tungsten (NVT) (new#), (old#), (old#) Flush Cup for SODICK WS201 WS203 WS206 WS208 WS209L WS209W2 WS202 SET WS205 WS207 WS209 WS209W WS209WS Size (mm) 150W. AP150 -silver tungsten- A. AW. EPOC Series. BF250. BF275. AP300~AP550. -silver tungsten- AQ. AW. A. AP200~AP550. PGW200. EXC100. BF. JL Series. EPOC Series (Manual/AF) Description WS201 5ø Nozzle NE Upper & Lower WS202 5ø Rectifi er Nozzle WS202SET Water Guide WS203 6ø Water Nozzle WS204 5ø Water Nozzle WS205 10ø Water Nozzle WS206 5ø Water Nozzle WS207-3 WS207-4 WS207-6 WS WS WS208-3 WS208-6 WS209-3 WS209-4 WS209-6 WS WS ø 4ø 6ø 10ø 12ø 3ø 6ø 3ø 4ø 6ø 10ø 12ø Nozzle C Nozzle G3 Nozzle G4 Nozzle H2 Nozzle T2 Water Nozzle Nozzle E3 Nozzle E4 Nozzle A Nozzle H1 Nozzle T1 Position Machine Original P/No. Upper & Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower Upper 330W. 453W. 654W. EPOC3W (Manual) -for 84 type SUS assy- E3WS, BF250, BF275, EPOC302, EPOC300, AW330,453 (Manual) -water guide 3WS assy- BF250. BF275. EPOC Series. E3WS. AW (Manual) -3WS assy- AP150. PGW150 (Manual) -water guide P- 150W. 330W. 453W. 654W. G3A. AP150. AW150. AW EPOC (Manual) 150W. 330W. 453W. AP150. AW150. AW EPOC (Manual) 150W. 330W. 453W. 654W. G3A. AP150. AW150. AW EPOC (Manual) -with nose- AQ. A. EPCO Series. AP200~AP550. PGW200. EXC110. BF. JL Series AW (AWT) Lower A AW BF Series Upper & Lower A. AQ. EPOC Series. AP200~AP550. AW PGW200. EXC100. BF. JL Series (Manual: U&L/AF: L) WS209L L=4 Nozzle Lower A Series, PGW, AP -long head- WS209W 6ø Nozzle S87-3 Lower AQ. A Series. AP300~AP500 (AWT) -fl oat nozzle S87-3 WS209W2 6ø Nozzle Lower AQ330W -fl oat nozzle- WS209WS Spring Ring Lower AQ, A Series, AP300~550 (AWT) -for fl oat nozzle- WS210 3ø Water Nozzle Lower A280L, 500L, AW320, AW350, L Series (AWT) ( ) (NVT) (3mm) (4mm) (6mm) (10mm) (12mm) (3mm) (4mm) (6mm) (10mm) (12mm) WS210

21 For Connected Parts for SODICK WS399 WS400C WS405 WS408 WS411 WS413 WS415 WS417 WS5047 WS5051 WS5055 WF101 WF103 WF102 WF105 WS400 WS401 WS407 WS409 WS412 WS414 WS416 WS417A WS5034 WS5048 WS5053 Wire EDM Spare Parts WIRE EDM Parts WS407 WS408 Nozzle Holder Nozzle Holder WS409 Nozzle Holder WS411 Urethane Roller WS412 10ø Urethane Roller WS413 7ø + M5 Urethane Roller Upper & Lower Upper AQ. A. EPOC Series. AP200~AP550. PGW200. EXC100. BF. JL Series (Manual: U&L/AF: L for WS209) AQ. A. EPOC Series. AP200~AP550. PGW200. EXC100. BF. JL Series Upper (AWT for WS207) Upper & Lower Upper A, AP, BF, EPOC Series Upper Upper A350D. A320. BF. AP. EPOC (M/C Type) BF275, Old (M/C Type) WS414 70x20 Roller B Feed A500W, BF Section WS415 70x20 Roller C Feed A500W, BF Section WS416 Tension Upper A530D, AQ325, AQ325L Urethane Roller WS x19x22 Urethane AQ325L, 535L, AQ SERIES AP , Roller WS417A 100x10x22 Urethane Lower A320, AQ530, (AQ325-OLD TYPE) Roller WS500 AWT Cutter Upper (for AWT) (=S035W) , WS x12 Roller B Feed A Series Section WS5048 Roller B BF275 WS5051 Roller C A Series -ceramic WS5053 Roller C A WS5013 Die Block Only WS5013SET.U Die Block Upper WS5013SET.L Die Block Lower WS5031 Pully V Ceramic w/ Shaft WS5032 Pully V Ceramic Only WS x58x25 AQ325m Ceramic Pulley Base,72x58x25mm (t) Diamond Guide for FANUC WF WF WF WF WF WF WF WF WF WF Size (mm) Size (mm) Description Position Machine Original P/No. WS399 Pulley B A Series - ceramic WS Pulley E EPOC, BF, A Series (Manual, for AF Belt/SUS) WS400C 25 Pulley E EPOC, BF, A Series (Manual, for AF Belt/Ceramic) -w/ 2mm groove- WS401 Bearing -for Pully 626LLB- 626RS (LLB) WS405 Wire Roller Upper AP Description Position Wire Guide Upper O. P. Q. R. T. Mate. W Series (Manual) Machine Original P/No. Wire Guide Lower O. P. Q. R. T. Mate. W Series (Manual) A X765 A X766 A X (NVT) A X775 A X776 A X (NVT) Wire Guide Upper O. P. Q. R. T. W Series (AWF) A X774 A X775 A X776 A X (NVT) WF Wire Guide Lower A X734 WF WF WF Wire Guide Lower K. M. N. L Series (AWF) A X443 A X444 A X445 EDM & ACCESSORIES WF106

22 EDM & ACCESSORIES For Size (mm) WF107 WF110 WF112 WF113L WF125-1 WF108 WF111 WF113 WF124 WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF113L-08 WF113L-10 WF113L Description Wire Guide Position Upper & Lower Machine Original P/No. K. M. N. L Series (Manual, 300A power supply) A X833 A X834 A X835 Wire Guide Upper K. M. N. L Series (AWF) 60C A X463 A X464 A X (NVT) Wire Guide Upper & Lower K. M. N. L Series (Manual, 60C power supply) A X753 A X754 A X (NVT) Wire Guide Upper a -0A, 0B, 0C, ia, ib Series (Manual) A X733 A X734 A X (NVT) Wire Guide Lower a -0A, 0B, 0C, ia, ib Series (Manual) A X743 A X744 A X (NVT) Wire Guide Upper a -1A, 1B, 1C, ia, ib (AWF) A X705 A X706 A X (NVT) Wire Guide Lower a -1A, 1B, 1C, ia, ib Series (AWF) A X715 A X716 A X (NVT) Wire Guide Lower For big angle a -1B (Length: 19mm) WF Die Guide Upper A X645 WF ø Jet Nozzle Lower a -A, B, C, ia, ib Series (AWF) A Y774 30x12 WF Jet Nozzle Upper a -A, B, C, ia, ib Series (AWF) A Y756 WF WF WF-Y726 WIRE EDM Parts Wire EDM Spare Parts 0.3mm 0.5mm Sub Die Guide Upper DWC-A,B,C,iA,iB (AWF) A X620 A X620 Sub Die Guide Upper A Y726 or A Y726 Power Feed Contact for FANUC WF001 WF003 WF005 WF007 WF201 WF204 WF206 WF002 WF004 WF006 WF202 WF205 WF206S Size (mm) Description Position Machine Original P/No. WF001 25x9x10 Power Feed Contact WF002 16X6X6.3 Power Feed Contact WF003 8x4x10 Power Feed Contact WF004 16x6.3x6 Power Feed Contact WF x7.7x23 Power Feed Contact WF006 4x12x23 Power Feed Contact WF006L 4x12x30 Power Feed Contact WF007 15x6x6 Power Feed Contact WF201-3 WF201-4 WF201-5 WF202-3 WF202-4 WF ø 4ø 5.5ø 3ø 4ø 5.5ø Water Nozzle Lower H. L. E. M. K A97L /25S1P Lower O. P. Q. R. T. Mate. W A97L /15S1P Upper & K. N. M A X107 Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower AF, W-1, 2, 3, 4 (AWF) a-0a, 0B, 1A, 1B (Manual/ AWF) (polished) a-0c, 1C, ia, ib (Manual/ AWF, standard type) a-0c, 1C, ia, ib (Manual/ AWF, long type) A Z (NVT) A X (NVT) A X750 A X750 Upper W-0 A X759 Upper & Lower O. P. Q. R. W. T Series (Manual) Water Nozzle Lower O. P. Q. R. W. T. Mate Series (Manual) A Y745 A Y705 (Y755) WF ø Water Nozzle Lower AF, W-1, 2, 3, 4 (AWF) A X879 WF ø Water Nozzle Upper AF, W-1, 2, 3, 4 (AWF) A Y611 (Y745) (NVT) WF206 Nozzle Cap Upper & Lower WF206S Nozzle Cap Upper & Lower O. P. Q. R. T. Mate W Series (for WF201/WF202, Brass) O. P. Q. R. T. W Series (for WF201/WF202, Stainless) A V722 A V722

23 Flushing Cup for FANUC WF207 WF209 WF211 WF213 WF215 WF217 WF208 WF210 WF212 WF214 WF216 WF218 Size (mm) Wire EDM Spare Parts WIRE EDM Parts Description WF207 24x17x7 Water Nozzle WF208 26x17x7 Water Nozzle WF209-6 WF ø 11ø Water Nozzle WF210 16ø Nozzle Holder WF ø Water Nozzle WF ø Water Nozzle WF ø Water Nozzle WF214 4ø Water Nozzle WF215 4ø Water Nozzle WF216 12ø Water Nozzle WF217 12ø Water Nozzle WF ø Water Nozzle Position Machine Original P/No. Lower W-0 (Manual) A X (NVT) Lower W-0 (Manaul) A X (NVT) Upper Lower Lower Upper Lower Upper Lower Upper Lower a-0a, 0B, 0C, ia, ib Series (Manual) a-0a, 0B, 0C, ia, ib Series (Manual) a-0a, 0B, 0C, ia, ib Series (Manual) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) A X776 (A X776 for C) A X776 A X (NVT) A X (NVT) A X (NVT) A X (NVT) A X771 A X752 (775) A X774 A X752 A X772 Upper a-0c, 1C Series (Manual)wf A X776 WF275 Nozzle base Upper D=58mmx19mmL-5 screw holes A Y723 Connected Parts for FANUC Size (mm) Description Position Machine Original P/No. WF x62.5x10 Isolator Plate Lower L, H (Manual) -ceramic- A X722 WF302 75x63x10 Isolator Plate Lower O, P, Q, R, T, Mate A X709 WF301 WF302 WF303 73x39x12 Isolator Plate Lower AF, W Series (AWT) -ceramic- A X334 WF304 51x33x29 Isolator Plate Upper O, P, Q, T, Mate, W A X602 WF305 40x40x34 Isolator Plate Upper a-a, B Series A X509 WF303 WF x27x35 Isolator Plate Upper a-ib (AWF) A X600 WF304 WF x27x48 Isolator Plate Upper a-b (AWF) WF306 72øx15 Isolator Plate Lower a-a.b.c Series A X312 WF307 75x56x66 Isolator Plate Lower a-a, B Series A X761 WF305 WF305-1 WF x66x56 Isolator Plate Lower a-c Series (F318) WF x66x56 Isolator Plate Lower a-c Series (F317) WF400 12x6x4 Bearing SS1260(Z) for WF401 & WF402 WF305-2 WF306 WF401 49x6.5x6 Wire Roller Lower E, K, O, P, Q, T Mate, W A X713 (plastic+brass) WF401S 49x6.5x6 Wire Roller Lower E, K, O, P, Q, T Mate, W A X713-S (plastic+stainless) WF307 WF307-1 WF401-1 L=26 Shaft Lower E, K, O, P, Q, T Mate, W (for A X254 WF401/WF401S) WF402 64x6.5x6 Wire Roller Lower L, H, M, W (plastic+brass) A X707 WF402S 64x6.5x6 Wire Roller Lower L, H, M, W (plastic+stainless) A X707-S WF307-2 WF400 WF403 40x40x25 Guide Base Lower a-a.b Series (stainless) A X762 WF x49x20 Guide Block A Lower a-a Series (Manual/AWF) -stainless- A X770 WF401 WF401S SET WF403 WF408 WF409 WF401-1 WF402 WF404 WF409W WF x22x12 Roller Lower a -A, B, C, ia, ib Series (Manual/ AWF) -ceramic- WF406 40x20x18 Pinch Roller Lower a-a.b Series (Manual/AWF) -ceramic- WF407 40x20x19 Feed Roller Lower a-a.b Series (Manual/AWF) -ceramic- WF408 57x20x20 Feed Wire Guide Feed Section a -A, B, C Series (Manual/AWF) -plastic- EDM & ACCESSORIES A X765 (A97L ) A Z382 A97L A Z383 A X393 WF øx22 Brake Shoe Upper a-a.b.c.ia.ib Series (Manual/ A X371 AWF) WF409W Brake Shoe Upper O, P, Q, T, W A V352 WF-Y x 8mm Sapphire Roller A Y701

24 EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts Connected Parts for FANUC WF411 WF413 WF502 WF503 WF721 WF410 WF412 WF414 WF502 WF503 Size (mm) Description Position Machine Original P/No. WF409W0 Brake Shoe Upper W0 Series (AWF) A V352 WF410 40x12x30 Pinch Roller Feed a-c (Manaul/AWF) -ceramic- A X382 Section WF411 40x12x30 Feed Roller Feed a-c (Manual/AWF) -ceramic- A X383 Section WF412 46x40x24.5 Guide Base Lower a-c.ia.ib Series (Manual/AWF) -stainless- A Y762 WF413 80øx22 Pinch Roller Feed Section WF414 80øx22 Feed Roller Feed Section WF501 =WM608V a-0ia, 1iA, 0iB, 1iB (Manual/ AWF) a-0ia, 1iA, 0iB, 1iB (Manual/ AWF) 22x8x7mm Bearing Lower a-a.b.c.ia.ib Series (Manual/ AWF) -for WF404-1 WF502 Bearing Lower a-a.b.c Series (Manual/AWF) -for WF406, WF410- A X382 A X383 A97L / DRF2280H A97L / 6001LLU WF503 Bearing Lower a-a.b Series (Manual/AWF) A97L / 6203LLU WF514 = WF721 Guide Block Upper A X721 WF516 Die Guide Base A Y722 A X751 Electrod Pin A X751 Cap Screw WFVP V-Packing A97L WF721 Guide Block Upper A X721 For Wire Guide for BROTHER WB101 WB103 WB102 WB104 Size (mm) Description Position Machine Original P/No. WB WB WB WB WB WB WB WB WB WB WB WB Wire Guide Lower HS-300, 350, Wire Guide Upper HS-3100, 3600, HS-50A (AWT) Wire Guide Lower HS-3100, 3600, HS-50A (AWT) Wire Guide Upper & Lower HS-3100, 3600, HS-50A (STD, Manual) ( ) ( ) ( ) Power Feed for BROTHER WB001 WB002 Size (mm) Description Position Machine Original P/No. WB001 14x14x9 Power Feed Contact Upper & Lower HS-300, WB002 4x10x19 Power Feed Contact Upper & Lower HS-3100, 3600, Flushing Cup for BROTHER Size (mm) Description Position Machine Original P/No. WB201 4ø Water Nozzle Upper & Lower HS-300, 350 (Nozzle-100) WB202 4ø Water Nozzle Upper LS, HS-3100, 3600, HS-50A (AWT/ Manual, Nozzle 1506) WF201 WB202 WB203 WB203 4ø Water Nozzle Upper LS, HS-3100, 3600, HS-50A (AWT/1506) WB205 4ø Water Nozzle Lower

25 Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES Connected Parts for BROTHER For WF301 WF402 WF401C Size (mm) Description Position Machine Original P/No. WB301 57x46x9 Isolator Plate Lower HS ceramic WB401C Guide Pulley HS-300 (Wire Guide Roller 300) -ceramic WB402 Bearing HS-300 (SSLF 1260ZZ) -for WB (NVT) WB302 Arm Insulation Lower HS-50A Wire Guide for HITACHI Size (mm) Description Position Machine Original P/No. WH WH WH Wire Guide Upper Hi-Cut 203, 304, 345, 460, Q Series (Manual) Q1846 Q1846(C206) Q1846 WH101 WH102 WH WH WH Wire Guide Lower Hi-Cut 203, 304, 345, 460, Q Series (Manual) Q1848 Q1848(C207) Q1848 WH103 WH WH WH Wire Guide Upper & Lower H-Cut Series (Manual) Power Feed Contact for HITACHI WH002 WH001 WH005 Size (mm) Description Position Machine Original P/No. WH øx32 Power Feed Upper & Lower 203, 304, 345, 460, 580, 610 S1325(C202) Contact WH002 11øx32 Power Feed Contact WH005 9x18x18 Power Feed Contact WH005G 9x18x18 Power Feed Contact Upper & Lower H-CUT 203M, 304P, 406P, 508R, Q Series (AWT) Upper & Lower H-CUT 254Y, 355Y, 203R, 203F -standard type- Upper & Lower H-CUT 254RS, 355RS (Tin Coating) -gold type- (Q1825)Q6172 (C297) 43144(C850) 43033(C016) Power Feed Contact for HITACHI WH201 WH203 WH202 WH204 Size (mm) Description Position Machine Original P/No. WH201 Water Nozzle HI-CUT 203, 304, 345, 460 WH202 Water Nozzle HI-CUT 203, 304, 345, 460 WH203-4 WH ø 6ø Water Nozzle Lower HI-CUT 203M, Q Series -high speed- C261 C260 WH204 Nozzle Support Lower HI-CUT 203M, Q Series (AWT) Q6205(C372) (C327) WH205 Nozzle Support Upper HI-CUT 203M, Q Series (AWT) Q6201(C494) WH205 For Wire Guide for CHARMILLES Size (mm) Description Position Machine Original P/No. WC101 WC WC WC Wire Guide Upper ROBOFIL 100, 200, 230, 290, 300, 310, 330, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (WxH: 6x4mm) , , PG , 02PG ( , ), 02PG (NVT) WC102 WC WC WC Wire Guide Lower ROBOFIL 100, 200, 290, 300, 310, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (WxH: 5x4mm) (Nirosta) , , , 02PG , 02PG ( ), 02PG (NVT)

26 EDM & ACCESSORIES For Power Feed for CHARMILLES WIRE EDM Parts Wire EDM Spare Parts WC001 WC002 WC004 WC005-1 WC006 WC109 WC001G WC003 WC005 WC005 WC006-1 Size (mm) Description Position Machine Original P/No. WC001 12x12x5 Power Feed Contact WC001G 12x12x5 Power Feed Contact WC002 25x6x6.4 Power Feed Contact WC x3.8x3 Power Feed Contact WC x19x10 Centering Eye WC005 WC005-1 WC006 Flushing Cup for CHARMILLES WC006-1 OD=50 ID=8 L=24 OD=50 ID=14 L=14 OD=50 ID=8 L=24 OD=50 OD=14 L=14 Upper & Lower Upper & Lower ROBOFIL 100, 200, 230, 290, 300, 310, 330, 400, 500, 510, 600 X020, X030 (Tungsten Carbide) ROBOFIL 100, 200, 330, 400, 600 (w/o fast cut); 1000, 2000, 4000, 6000 (including micro cut) (WC001 w/ Tin Coated: same conductivity with Pure Tungsten) Lower ROBOFIL 100, 200, 400, Upper & EF-320, 330, 630, Lower ROBOFIL 100, 200, 290, 300, 310, 400, 500, 510, 600, 1000, 2000, 4000, 6000 Pulley Lower ROBOFIL 290, 300, 310, 500, 510 (w/o groove) Pulley Lower ROBOFIL 290, 300, 310, 500, 510, 690 (w/o groove) Pulley Lower ROBOFIL 290, 300, 310, 500, 510 (w/ 4 grooves) Pulley Lower ROBOFIL 290, 300, 310, 500, 510, 690 Lower (w/ 2 grooves) PO ( ) (NVT) PO ( ) (NVT) (NVT) WC109 Tungsten Carbide ( ) (NVT) ( ) (NVT) Size (mm) Description Position Machine Original P/No. WC ø Water Nozzle WC201 WC202 WC202 ID=6.8 OD=33.5 L=15.5 Water Nozzle Upper & Lower ROBOFIL 290, 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (United 3 parts to one nozzle: Cap with 7mm + Middle Cap + Base Nozzle) (Novotec) WC ø Water Nozzle WC204 7ø Flat Nozzle WC205 6ø Water Nozzle Lower ROBOFIL 230, WC203 WC205 WC20X 6ø Ceramic nozzle RFI/100/200/400/ Connected Parts for CHARMILLES WC501 WC503 WC505 WC506L WC502 WC504 WC506 WC601 Size (mm) Description WC501 45ø Plastic Nut L=11 Position Machine Original P/No. Upper & Lower ROBOFIL 290, 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 WC502 Spring Upper ROBOFIL 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 WC503 WC504 WC505 WC506 WC506L 45ø L=19 OD=20 L=16 OD=20 L=24 Contact Brush Lower ROBOFIL 290, 300, 310, 500, 510, 2030SI (NVT) Plastic Nut Upper ROBOFIL 290, 300, 310, 500, Ground Lower ROBOFIL 290, 300, 310, 500, Cable Sleeve Lower ROBOFIL 290, 300, 310, 500, Sleeve Lower WC601 30ø Knife Lower ROBOFIL 230, WC ø Threading Nozzle Upper ROBOFIL 100, 200, 300, 310, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (Ceramic)

27 Connected Parts for CHARMILLES WC602-2 WC604 WC605-1 WC608S For Wire Guide for JAPAX WJ102 WJ104A WJ108 WC602 WC605 WC605-2 WC608RS MISC. Parts for CHARMILLES WJ101 WJ103 WJ104B Size (mm) Description WC ø Threading Nozzle WC604 WC605 Power Feed Contact for JAPAX WC Thick=17 L=24 WC Thick=15 L=24 WC608S OD=22 ID=8 Thick=7 WC608RS OD=22 ID=8 Thick=7 Driving Roller Contact Holder Contact Holder Contact Holder Wire EDM Spare Parts WIRE EDM Parts Position Machine Original P/No. Upper ROBOFIL 100, 200, 300, 310, 330, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (Ceramic) Lower ROBOFIL 230, Lower ROBOFIL 230, Upper ROBOFIL 230, 290, 300, 310, 330, 500, Lower ROBOFIL 1020, 2020, 4020, Bearing stainless steel w/o rubber seal SS608 ZZ Bearing stainless steel w/ rubber seal SS608 2RS Size (mm) Description Position Machine Original P/No. WJ WJ Wire Guide Upper EXP.LUB. LS-S. LS-X. LV. LUX. SSZ1106 SSZ1107 WJ LXE. LXR. LDM. SSZ1108 ELVY (Manual/ WJ WJ WJ WJ WJ WJ WJ104A-08 WJ104A-10 WJ104A-12 WJ104B-08 WJ104B-10 WJ104B-12 WJ WJ WJ AF) Wire Guide Lower EXP.LUB. LS-S. LS-X. LV. LUX. LXE. LXR. LDM. ELVY (Manual/ AF) Wire Guide Upper LS-A, LU3B (Manual) Wire Guide Upper & Lower LS-A (Manual, Float Type) L=44mm Wire Guide Lower LS-A (Manual) L=28mm SSZ2106 SSZ2107 SSZ2108 SSZ1006 SSZ1007 SSZ1008 SSZ3006 SSZ3007 SSZ3008 SSZ2006 SSZ2007 SSZ2008 Wire Guide Upper & Lower AMADA Japax SSZ0010 EDM & ACCESSORIES Description Position Machine Original P/No. WC Current Transmitter Upper WC Ground Cable for Charmilles Lower EDM WC Machining Cable Lower for Charmilles EDM Lower WJ001 WJ002 Size (mm) Description Position Machine Original P/No. WJ001 10x4x7 Power Feed Upper & LS-A, L, LXR (AF3) MGK0001 Contact Lower WJ x10.5x7 Power Feed Upper & LS-A (Float Type), LS-S, LS-X, MGS1122 Contact Lower LU3B, LUX-3, LV-3, LX, LX-S, LXE, LXRLDM, ELVY, EXP20, LDM, FA, FAS WJ003 20x20x7 Power Feed Contact Upper & Lower LDM (AF-4), LXR-S, EXP, LUX, LXR, LV, LXE AF4G003 WJ004 12X6X6 Power Feed Contact Upper LS-A, LS-S, LS-X, LU3B, LUX-3, LV- 3, LXE, LXR, LDM, ELVY, LDM-S MGK0101 WJ003 WJ004 Connected Parts for JAPAX WJ301-1 WJ302 Size (mm) Description Position Machine Original P/No. WJ x24x20 Urethane Roller 30RL-B-103 (bearing not included) -steel- WJ302 Flange Lower 80AR-LDM-100

28 EDM & ACCESSORIES Flushing Cup for JAPAX WIRE EDM Parts Wire EDM Spare Parts WJ201 WJ203 WJ206 WJ208 WJ210 WJ212 WJ202 WJ205 WJ207 WJ209 WJ211 WJ214 WJ2421 Size (mm) Description Position Machine Original P/No. WJ201 6ø Water Nozzle Lower LS-S, LS-X, LU, LD MGS WJ202 6ø Water Nozzle Lower LS-S, LU, LD MGS1121 WJ203 6ø Water Nozzle Lower LS, LU, LD 111G054 WJ205-4 WJ205-5 WJ205-7 WJ206-3 WJ206-4 WJ206-6 WJ ø 5ø 7ø 3ø 4ø 6ø 9ø Water Nozzle Lower LUX-3 (New Type), LV-3, LXE, EXP, LXR (Manaul), LU, LD Water Nozzle Upper LUX-3 (New Type), LV-3, LXE, LDM, LXR (Manual/AF), LS-A MGX5003 MGX5013 WJ207 6ø Water Nozzle Upper LXE (Manual, Old Type), LS, LD, MGX LU, LV WJ208 4ø Water Nozzle Lower LS-A, LS, LD, LU, LV (Long Type) MGX5014 WJ209 8ø Water Nozzle Lower LS, LD, LU, LV WJ210 8ø Water Nozzle Lower LS-A, LS, LD, LU, LV (Long Nozzle) L=51x31ømm WJ211 4ø Water Nozzle Lower AF-4 A4G0001 WJ212 6ø Water Nozzle Lower LDM (AF-4) L=13.5x32mm A4G0002 WJ213-4 WJ213-6 WJ214 4ø 6ø Water Nozzle Lower LUX, LDM LDM2306 Adjustment Nut Lower LUX, LDM (Long Type) L=10mm WJ2421 WJ2421 WJ2421 WJ2421 LDM Upper LDM2010 Filter for Wire EDM/ MITSUBISHI NW-12N NW-20 Machine Specifications IN/EX Fit to s (QxQIxH) NW-12A MITSUBISHI 300x29x500mm IN/EX DWC-70, 90, 110, 200 N Series NW-12AS MITSUBISHI 300x29x250mm IN/EX DWC-70, 90, 110, 200 N Series NW-12N MITSUBISHI 300x29x500mm IN DWC-F, PF, G, PG, H, U, C, HA, PH, HP, HS, H31.967/20 PA, P, SX Series H31.967/20 NW-20 MANN Filter MITSUBISHI 300x58x500mm IN/EX w/ nipple DWC90B, DWC90SB, DWC110A, DWC- 110SA, DWC-90, 110, Z, SZ, SZP Series H /20 NW-21 MANN Filter MITSUBISHI 340x46x300mm IN/EX w/ DWC-FX-10FX-2K, CX Series nipple H H /20 MANN Filter NW-21 Filter for Wire EDM/ SODICK NW-17 NW-18N NW-18H NW-11 H /20 Machine Specifications (QxQIxH) NW-18H SODICK 340x46x450mm Depth: 130mm IN/EX Fit to s IN A(350, 500, 600, 750), A350SSW A(300, 350, 500, 750, 1000)W A500MARK II(20, 21), A500P, BF(250, 275), BF280L, A350SS, A(320, 350)D, A350S H /20 MANN Filter NW-18N SODICK 340x46x300mm IN/EX A(300, 350, 350W, 500, 500W, 600, 600W, 750, 750W, 1000W, 500P, 500WP, 600P, 600WP) H /20 MANN Filter NW-17 SODICK 260x46x280mm EX 87 /7~... A(350, 500), EPOC(300, 500, 600, 800, 1100), A350S, A350SSW, AP(150, 200, 300, 330, 450), A(350, 500)W, 87/7~ SCG-150, AW(330, 453)W H26.644/20 MANN Filter NW-11 SODICK 150x33x345mm 150x33x350mm NW-01 SODICK 150x72x450mm EX AP NW-25N SODICK 340x46x450mm Inside In/ A320D & A530D... Outside out H /20 EX GOW(3, 5), EPOC3WS, C(2, 3, 4, 5)F, AP(150, 300), G3A, EPOC(3, 5, 40)W ~ 87/6..., C(2, 3, 4, 5)P, EPOC(300, 500, 600, 800), ~ 87/6 SCG AW(330, 453), AW(330, 453, 654)W

29 Filter for Wire EDM/ FANUC, ALPHA Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES NW-18N NW-18H H /20 Machine Specifications (QxQIxH) NW-18H FANUC, ALPHA 340x46x450mm Depth: 130mm IN/EX Fit to s IN O, P, Q, R, S, V, T CUTMATE TAPECUT W(0, 1, 2, 3, 4), FW340 ALPHA0(A, B, C), ALPHA1(A, B, C) H /20 MANN+HUMMEL NW-18N FANUC, ALPHA 340x46x300mm IN/EX O, P, Q, R, S, V, T MATE: W(0, 1, 2, 3, 4), ALPHA0(A, B, C), ALPHA1(A, B, C) H /20 NW-21A MANN+HUMMEL FANUC 340x46x300mm IN/EX w/ nipple New 180W H /20 Filter for Wire EDM/ BROTHER NW-12N H31.967/20 Machine Specifications IN/EX Fit to s (QxQIxH) NW-12N BROTHER 300x29x500mm IN HS(300, 350), HSC300 H31.967/20 MANN+HUMMEL Filter for Wire EDM/ HITACHI NW-20 H /20 Machine Specifications IN/EX Fit to s (QxQIxH) NW-20 HITACHI 300x58x500mm IN/EX w/ nipple H-CUT(3, 4, 5, 6, 8, 203)Q, H-CUT3HP H /20 NW-15 MANN+HUMMEL HITACHI 300x46x340mm IN H-CUT(304, 406)N, H-CUT(304, 406)P, H-CUT(304, 406)S, H-CUT304HP, H- CUT304NP, H-CUT406B, H-CUT406AWF NW-14 HITACHI 260x37x340mm EX H-CUT 304 Filter for Wire EDM/ CHARMILLES, AGIE, AMADA NW-19 Machine Specifications IN/EX Fit to s (QxQIxH) NW-19 CHARMILLES 150x33x345mm EX ROBOFIL Series AM370 AGIE 150x33x375mm AC200, AGICUT(100, 200, 300), AGICUT(100, 200, 300)D DEM(215, 250, 315, 700) AMADA WP(AW1, AW2, AW3) Filter for Wire EDM/ JAPAX NW-17 H26.644/20 NW-11 Machine Specifications (QxQIxH) IN/ EX Fit to s NW-17 JAPAX 260x46x280mm EX D100M DC500NC, DH150PSR, DH300B, DP40, DX85NC, DX80, JL85, LH3A H26.644/20 MANN+HUMMEL NW-11 JAPAX 150x33x345mm 150x33x350mm EX AT50, ELVY, EXP, EXP20, L300A, LDM35, LDM50, LDMFA, LF3A, LH3A, LL13B, LP3A, LT3A, LPA3A, LSP3A, LS(250, 350, 500, 800, 1000)/A, S, X, LX600M/4, LXEFA, LXE(35, 50) Filter for Wire EDM/ MAKINO NW-17 Machine Specifications IN/EX Fit to s (QxQIxH) NW-13 MAKINO 190x110x550mm EX EC-3025, 3040, 7050(old) NW-17 MAKINO 260x46x280mm EX EC-3025, 3040, 3141, 7050, 3141S, 3046N H26.644/20 MANN+HUMMEL H26.644/20

30 EDM & ACCESSORIES Filter for Wire EDM/ SEIBU Machine Specifications (QxQIxH) IN/EX Fit to s NW-20 NW-11 NW-20 SEIBU 300x58x500mm IN/EX w/ nipple H /20 MANN Filter EW-300K1, EWA(5, 7)S, EWA-C3 H /20 NW-11 SEIBU 150x33x345mm 150x33x350mm EX EW(25, 30, 35, 250, 300, 400,450, 600, 700, 1000), EW25C, EW300P, EW(300, 450, 600, 700, 1000)K, EW600F2, EW(450, 700)K1, EW(30, 35)N, EWP300A/B Filter for Wire EDM/ WASHINO Machine Specifications (QxQIxH) IN/EX Fit to s NW-24 WASHINO 260x50x400mm EX MANN FILTER EDM FILTERS eline M+H Dimension in mm Application Compare to d1 x d2 x h d1=od, d2=id, h=ht H /8 340 x 45.5 x 450 OE Filter Charmilles Robofi l 240/440 Charmilles & H x - x 450 OE Filter Charmilles New Generation System Unique Long Life Filter, NW-20 Will fi t Mits platforms H /2 340 x - x 450 Multi Mach. Platforms Char. Mitts Unique Long Life Filter, NW-20 Will fi t Mits platforms H31 967/1 302 x 29 x 507 Mitts DWC, F, G, H, C Brother Machines NW-12N A150 or 1220B-3 H /1 302 x - x 507 Mitts, SB, SA, SZ NW-20 A244 or 12205QC H /4 340 x - x 328 Multi Mach. Platforms Fanuc ib ic, char. Mitts., makino Unique Long Life Filter NW-21, NW-21A H /5 340 x 45.5 x 450 Sodic, Fanuc/ Alpha NW-18H, 1318 B3 and B5 Sodick HF-25, HF-25A, KH-25A H15 190/16 * 150 x 32 x 375 OE Charmilles/ Agie Use on Wire or Sinker NW-19, NW-11 Japax DF100 df H15 475/1 * 150 x 32 x 375 OE Agie Sinker Use on Wire or Sinker Premium OE Filter DF100 DF eline * 150 x 32 x 375 Charmilles/ Agie Use on Wire or Sinker Starting Point DF100 DF GROMAX Special stainless Wire Cut Vise DV053G5 DV150G5 DV520F3-1 DV524C05 Dimensions/Description (WxLxThickness+Height) Max. Load Fit to Machine DV053G3 2 x4.8 x for clamping and leveling 3.3 Lbs. All brands DV053G5 2 x4.8 x for clamping and leveling 3.3 Lbs. All brands DV150G3 6 x4.8 x two slots for clamping and leveling 8.8 Lbs. All brands DV150G5 6 x4.8 x two slots for clamping and leveling 8.8 Lbs. All brands DV500G x3 x (1.32 /1.52 /1.72 ) 33 Lbs. Mitsubishi, Seibu DV500G x3 x (1.32 /1.52 /1.72 ) 33 Lbs. Mitsubishi, Seibu DV500F x3 x (13 /17 ) 33 Lbs. Fanuc DV500F x3 x (13 /17 ) 33 Lbs. Fanuc DV520F (18 )x3 x Lbs. Fanuc alpha 1C DV524C (18 )x3 x Lbs. Fanuc DV520F (18 )x3 x increase height on both ends 33 Lbs. Fanuc alpha 1C DVSX1G x3.7 x increase height on both ends 33 Lbs. Mitsubishi, Seibu DV720K x3.2 x Lbs. Sodick AQ535 GROMAX Double-sided Clamping Beam(Ruler) Set of 2 pieces Item No. Dimensions/Description Max. Machine (WxLxThickness+Height) Load Set of 2pcs WGC x15.4 x x390x18+5mm 44.4Lbs. 20Kg Any Machine WGC x20 x x510x18+5mm 48.9Lbs. 22Kg Any Machine WGC x25.98 x x660x20+5mm 77.8Lbs. 35Kg Any Machine WGC x27.56 x x700x20+5mm 93.3Lbs. 42Kg Any Machine WGC x29.13 x x740x20+5mm 106.7Lbs. 48Kg Any Machine WGC x34.64 x x880x24+5mm 120Lbs. 54Kg Any Machine WGC x37.8 x x960x26+5mm 128.9Lbs. 58Kg Any Machine Application Wire EDM

31 GROMAX Special stainless Wire Cut Vise Item No. WZC-1550 WZC-2250 WZC-3550 WZC-1550 Shown Item No. Dimensions (WxLxTh.) Max. Load Square Workpiece WZC x5.9 x Lbs. 70mm 135x150x15mm 4Kg WZC x5.9 x Lbs. 70mm 135x150x22mm 6Kg WZC x5.9 x Lbs. 70mm 135x150x35mm 8Kg Application Wire EDM GROMAX WTC-45-P WTC-145 WTC-170 WTC-265 WTC-60 WTC-220 Stainless Double Sided Clamping WTC-45 WTC-065 WTC-260 WTC-50 WTC-120 STAINLESS SIDED CLAMPING FOR WIRE EDM Item No. Dimensions/Description (WxLxTh.+Height) Max. Load WTC-45-P 2.36 x8.66 x Lbs Set of 2 60x220x20+5mm 8Kg WTC x8.66 x Lbs set of 2 60x220x20+5mm 8Kg WTC x8.66 x Lbs set of 2 100x220x20+5mm 12Kg WTC x4.72 x Lbs 1 piece 65x120x15+5mm 8Kg WTC x6.7 x Lbs 1 piece 65x170x15+5mm 8Kg WTC x8.66 x Lbs 1 piece 60x220x22+5mm 12Kg WTC x8.66 x Lbs set of 4 65x220x15mm+5mm 10Kg WTC x4.72 x Lbs 1 piece 50x120x15+5mm 8Kg WTC x4.72 x Lbs 1 piece 60x120x15+5mm 8Kg WTC x5.9 x Lbs 1 piece 120x150x15+5mm 15Kg WTC x8.66 x Lbs 1 piece 120x220x15+5mm 20Kg Machine Any Machine GROMAX Special stainless Wire Cut Jig Holder DV41D Dimensions/ Description (WxLxThickness) DVS31 55x23x12mm fl at top DVS32 40x23x10mm fl at/small DV41D 70x23x12mm sharp top DV42D 70x23x8mm thin sharp/thin DV43D 95x23x12mm Long Type DVSDK1 80x25x12mm DU41 Fit to Machine Fanuc, Seibu Fanuc, Seibu Mitsubishi, Sodick Mitsubishi, Sodick Mitsubishi, Sodick Sodick 70x20x10mm M6 Charmilles DU42 70x20x8mm M6 Charmilles DU43 95x20x10mm Charmilles Long Type M6 GROMAX Stainless Wire Cut Vise 2 & 4 (WST50, WST100) vises shown D D DVSDK1 Stainless Vise Made of stainless steel to resist erosion One piece body construction Hardness: HRC 55 Parallelism & squareness within Precision ground and hardened throughout 1.14 DV43D DV42D DVS Whole pattern for 4 vises 6 vise (WST150) shown 8 vise (WST200) shown WST50 WST100 WST150 WST200 (2 ) (4 ) (6 ) (8 ) Length(inch) Width(inch) Jaw Opening Jaw Depth D Height Weight(lbs) For horizontal mounting of square workpiece 292.3k 292.6HPK Clamping range Max. wt 15.4 lbs 33 lbs of workpiece Weight 3 Lbs 6 Lbs The Ultimate Work Holding System Wire EDM Tooling Package 3R-282 Magnum levelling adaptor for mounting a supervise. Just 2 set screws gives extremely quick setting. * Recommand weight of workpiece: 33 lbs 3R HP (Fitted on 3R-282) Holer magnuom, holds up to 7 3/4 workpieces * Max. weight of workpiece: 33 lbs 3R-239.1K Ruler Vise Movable jaws of supervice design provide a wide clamping range for squareworkpieces. * Max. weight of workpiece with one vise: 33 lbs * Max. weight of workpiece with two vise: 440 lbs EDM & ACCESSORIES 3R-282 3R HP 3R-239.1K Wire EDM Tooling Package Have problem locating and holding small workpieces in your wire EDM machine? Starter Kit 3R contains: (A)3R-200.1J-U A universal reference element 140 mm long with oval holes, for all machines that have M8 holes spaced at 50 mm in the machine table, 30 to 40 mm from table edge (B)3R-272HP A leveling adaptor providing presetting in three axes outside the machine. And this with a precision that is within thousandths of a millimeter. (C)3R A universal holder for rapid and exact clamping of round workpiece mm dia or square workpieces up to 100 mm. (package) 3R-249.1HP CALL

32 EDM & ACCESSORIES GROMAX Stainless Vise 1 & 3 VBST30 VIRGIN RESIN REGENERATE RESIN resins for water and wastewater treatment, including deionization / Virgin Resin RESIN301 5 lbs RESIN lbs RESIN lbs RESINV010 1C.F. / Regenerate Resin RESINR010 1C.F. EDM Wire Neo Power Magnets for Wire EDM Extremely powerful and compact Made of Neody mium-iron-boron Rare Earth magnets Strong enough to hold very large core pieces during EDM operation 3/4 diameter MODEL (per box) NPM6(box of 6) H 2 O PLUS BLUE Wire EDM Corrosion Inhibitor & Cleaner For use in Wire EDM machines to prevent undesirable corrosion of work pieces and to continuously help keep the machine clean. Once added to the system, H 2 O Plus Blue allows more dirt and waste products to be captured by the fi ltration system, this helps keep the entire machine cleaner. Recommended for new machine installations where tank walls, fi lters, hoses, etc, are free of contamination. A concentration ratio of 0.5 to 100 guarantees optimal rust proofi ng and cleaning. Description FAST CUTTING / COMPETITIVE PRICE No Acid-Corrosion and No Damage to Resins: The special treatment avoids acid-corrosion on machine and work piece. Filtered water and ph will not be damaged. Thus lengthens the life span of the ion resins. High Surface Quality: The special treatment makes wire surface smooth, free from dirt, rust and grease that causes ineffi cient electric discharge. Standard Weight Control: By perfect control in process, we obtain the standard weight per coil that enables us to maintain the processing time stability and the drawing accuracy, this ensures the stable quality of wire. No Weldment: The rough surface caused by welding could affect the quality and accuracy of performance. The welded wire tends to break which results in lost time to re-thread. High-Dimensional Precision: Due to the control system of diamond dies and lubricant, wire diameter tolerance and roundness tolerance are both limited to 1/μm. No scratch, cracking, twisting and deformation can be found on our wire. Outstanding Straightness: The outstanding straightness and quality of NEW Gromax Zinc Coated wire ensures smooth automatic threading. Specifi cations: Zinc Coated Wire: CU 65% / ZN 35% Brass Wire, Zinc Enriched: CU 60% / ZN 40% NATURE OF WORK SOFT WIRE MEDIUM WIRE HARD WIRE Straight 1 pass cutting x good excellent WIRE DIAMETER DIAMETER BREAKING TENSILE ELONGATION Cutting TYPE TOLERANCE LOAD (N/MM²) STRENGTH % 2 pass cutting (rough and x x excellent fi nish) Hard 0.10mm (0.004 ) ±0.001mm 1.7 Lbs. 980> 0.4< 3 pass cutting (rough, x x excellent 0.15mm (0.006 ) ( ) 3.8 Lbs. (142,137 psi) fi nish and re-fi nish 0.20mm (0.008 ) 6.9 Lbs. Relief 1 pass cutting (relief x good excellent 0.25mm (0.010 ) 10.8 Lbs. Cutting under 10 ) 0.30mm (0.012 ) 15.6 Lbs. 1 pass cutting (relief good excellent x 0.33mm (0.013 ) 18.8 Lbs ) Soft 0.20mm (0.008 ) ±0.001mm 3.1 Lbs. 441> 15< x: not recommended 1 pass cutting (relief over 20 ) VST10 This STAINLESS VISE is suitable for workholding under water. Ideal for wire-cut & drill type EDM where tap water is used as dielectric fl uid. Squareness and parallelism within Material: 440 stainless steel. Hardness: HRC 56 Length Width Jaw Jaw Opening Height VST10 2-9/ /8 VBST20 5-1/ VBST30 7-1/16 2-7/ /8 excellent good x GROMAX Stainless Vise Good for Small Hole EDM!! Length: 6.3 Width: 2.75 Jaw Opening: 3.15 Jaw Height: 1.18 Weight: 10 Lbs VST25 Made of stainless steel, hardened and precision ground HRC 56 squareness and parallelism within " Good for operation under water GROMAX Adjustable Precision Vise for EDM Top View Parallelism is within /3.94 (0.003mm/ 100mm); squareness is within /3.94 (0.005mm/100mm). Harden treatment is up to HRC 50 ~55. This vise can be adjusted up and down, left and right, forth and back to make parallelism. Strong clamping can stand high water pressure. Description PV320 Stainless Vise CIC1 CIC5 1 Gal. Container 5 Gal. Container 0.25mm (0.010 ) ( ) 4.9 Lbs. (63,961 psi) 0.30mm (0.012 ) 7.0 Lbs.

33 EDM Wire EDM & ACCESSORIES Spool Dimensions: Spool Type Lbs. Kg. A B C D P-1R P-3R P-5R P P P DIN DIN DIN A B C Approximate Length of Wire Per Spool in Yards: Wire Dia. P-3R P-5R DIN-160 P-10R DIN-200 P-15R / 22,000 36,500 NA NA NA NA 0.15mm / 12,500 20,800 25,000 41,600 62,400 83, mm / 7,900 13,100 15,800 26,200 39,300 52, mm / 0.30mm 5,400 9,000 10,800 18,000 27,000 36,000 s may be changed from London Metal Exchange without notice. Wire for Japanese s (P Series) ZINC Coated Hard Wire Brass Hard Wire ZINC Coated Soft Wire Brass Soft Wire Spool Type Dia. /Lbs. /Lbs. /Lbs. /Lbs. Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-1R 0.10mm (0.004 ) ZP0110 BP0110 BP0110S (3.3 Lbs./1.5 Kg) 0.15mm (0.006 ) ZP0115 BP0115 BP0115 S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-3R 0.10mm (0.004 ) ZP0310 BP0310 BP0310S (6.6 Lbs./3 Kg) 0.15mm (0.006 ) ZP0315 BP0315 BP0315S 0.20mm (0.008 ) ZP0320 BP0320 ZP0320S BP0320S 0.25mm (0.010 ) ZP0325 BP0325 ZP0325S BP0325S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-5R 0.20mm (0.008 ) ZP0520 BP0520 ZP0520S BP0520S (11 Lbs./5 Kg) 0.25mm (0.010 ) ZP0525 BP0525 ZP0525S BP0525S 0.30mm (0.012 ) ZP0530 BP0530 ZP0530S BP0530S 0.33mm (0.013 ) ZP0533 BP0533 ZP0533S BP0533S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 20 and up 1~19 30 and up 1~29 P mm (0.008 ) ZP05206 BP05206 ZP05206S BP05206S (13.2 Lbs./6 Kg) 0.25mm (0.010 ) ZP05256 BP05256 ZP05256S BP05256S 0.30mm (0.012 ) ZP05306 BP05306 ZP05306S BP05306S 0.33mm (0.013 ) ZP05336 BP05336 ZP05336S BP05336S Quantity of Order (Spool) 20 and up 1~19 20 and up 1~19 10 and up 1~9 20 and up 1~19 P mm (0.008 ) ZP1020 BP1020 ZP1020S BP1020S (22 Lbs./10 Kg) 0.25mm (0.010 ) ZP1025 BP1025 ZP1025S BP1025S 0.30mm (0.012 ) ZP1030 BP1030 ZP1030S BP1030S 0.33mm (0.013 ) ZP1033 BP1033 ZP1033S BP1033S Quantity of Order (Spool) 10 and up 1~9 10 and up 1~9 10 and up 1~9 10 and up 1~9 P mm (0.008 ) ZP1520 BP1520 ZP1520S BP1520S (44 Lbs./20 Kg) 0.25mm (0.010 ) ZP1525 BP1525 ZP1525S BP1525S 0.30mm (0.012 ) ZP1530 BP1530 ZP1530S BP1530S 0.33mm (0.013 ) ZP1533 BP1533 ZP1533S BP1533S Wire for European s (DIN Series) ZINC Coated Hard Wire BRASS Hard Wire ZINC Coated Soft Wire BRASS Soft Wire Spool Type Dia. /Lbs. /Lbs. /Lbs. /Lbs. Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 DIN mm (0.004 ) ZD1210 BD1210 ZD1210S BD1210S (7.7 Lbs./3.5 Kg) 0.15mm (0.006 ) ZD1215 BD1215 ZD1215S BD1215S 0.20mm (0.008 ) ZD1220 BD1220 ZD1220S BD1220S 0.25mm (0.010 ) ZD1225 BD1225 ZD1225S BD1225S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 DIN mm (0.008 ) ZD1620 BD1620 ZD1620S BD1620S (17.6 Lbs./8 Kg) 0.25mm (0.010 ) ZD1625 BD1625 ZD1625S BD1625S 0.30mm (0.012 ) ZD1630 BD1630 ZD1630S BD1630S 0.33mm (0.013 ) ZD1633 BD1633 ZD1633S BD1633S Quantity of Order (Spool) 20 and up 1~19 20 and up 1~19 20 and up 1~19 20 and up 1~19 DIN mm (0.008 ) ZD2020 BD2020 ZD2020S BD2020S (35.2 Lbs./16 Kg) 0.25mm (0.010 ) ZD2025 BD2025 ZD2025S BD2025S 0.30mm (0.012 ) ZD2030 BD2030 ZD2030S BD2030S 0.33mm (0.013 ) ZD2033 BD2033 ZD2033S BD2033S

34 EDM & ACCESSORIES Orbiting-Cut System GROMAX CNC Orbiting-Cut System GROMAX EDM RAM EDM & ACCESSORIES (A) V-Block Type (B) Dove-Tail Type Adapter 3R-A3620 (3R) T-3620 (Taiwan) This part can be replaced by 3R or EROWA Tooling system 3R Adapter 3R-A11489 EROWA Adapter Hirschmann Adapter Computer Control Specification: Feature Membrane keyboard over 30 operation tracks Z-lock and LORAN mode control Motion Direct Circle, Square, Hexagon X Indicator and + available Power AC 110 V, 0.4KVA Dimension Setting Orbit Speed /Sec. in 10 Steps Dimension 16.5 x 13.8 x 11.1 (WxDxH) Weight 42 LBS. for: 3R TOOLING EDM-MARCO EDM-MINI etc. for: 3R S EROWA Tooling Set Hirschmann Tooling Set Upgrade manual EDM up to 80% CNC functions; Reduce machining time 100% & electrode wear 30%; Improves surface fi nish 50% (B) Orbit-Cut Head Specification (A) Orbit-Cut Head Specification Feature Suitable for any EDM Feature Suitable for any EDM Max.Electrode 110 LBS. Max. Electrode Wt. 33 LBS. Wt. Size (LxWxH) 7.87 x 7.87 x 8.66 Size (LxWxH) 7.87 x7.87 x7.87 Weight 30 LBS. Weight 60 LBS. X, Y Travel ± X, Y Travel ± Repeat Accuracy Repeat Accuracy (A) (B) ORBIT15C (controller) ORBIT50C (controller) +ORBIT15H (head) +ORBIT50H (head) 1/15 Horsepower Weight: 9 lbs 3R-1.6S HARIG EDM Roto-Spindle E-5 ( ) E-20 ( ) 2 shank sizes: 1/2 (for E-5) 20mm (for E-20) Flush-Chuck For Roto-Spindle & other EDM rotating spindles 3R Rotating Spindle Electrically-driven Rotating Spindle for electrode on Mini Holders rpm Optional Accessories: ER20 or RD20 collets set of Flush-Chuck for E-5 with 1/2 shank Flush-Chuck for E-20 with 20 mm shank using ROHM chuck (capacity 0~1/8 ) 3R Hi-Speed Rotating Spindle Complete Set : HS (High Speed) Speeds hole-making up to 50% faster while improving accuracy & reducing electrode wear Variable speed motor operates rpm on 110V Current through spindle 10amp max. Spindle Accuracy Two s: E-5: ER-20 or RD-20 collets up to 1/2 E-20 holds 20mm holder rpm Wt. per set 1.321HS 6Lbs Cuts at 45 0 for corner sharpening Hexagon machining Makes it easy to engrave a T-type channel Screw mold function Preventing buildups of debris and deformation in boring a deep hole & big plane Different sizes of cavity machining can be done using just one size of electrode. GROMAX Rotating Spindles RS200 Set RS200 Spindel Only RS200.CRT Controller Flush hole 1~16mm 15 pcs collet set Weight/spindle: 9 Lbs controller: 3 Lbs collet set: 4 Lbs Speed range: 0~250 rpm Control Unit: 110 VAC Collet: 1~16mm, 15 pcs set ER25 Rotating spindles designed for small hole operation with tubular electrodes; Side fl ush hole design allow to fl ush through the electrodes; Higher metal removal rate for deep hole operations (fl ushing + rotating = less machining time); Reduce electrode wear & improve fi nish with straighter hole.

35 New Harig Ultra-Grind No. 5C-V An Advanced Combination 5C Collet/V-Block System Long-life tool steel body Advanced ball and curved race ultra-precise, pre-loaded bearing Precision 24 division index (15 ) Stop pin and adjustable stops with sine arrangement for other angles plus handy lock 360 graduated dial & purge system Ultra-Grind No. 5C-V (w/ 1/2 5C collet, v-block & carrying case) Front View The Harig Ultra-Grind No. 5C-V is the version of the popular combination 5C Collet/V-Block fi xture. The Harig unit offers long-life, high accuracy, reliability and many features. Quick, easy change over from Collet to V-Block. The advanced bearing is ideal for motorizing. Lube Port and Purge Line permits more EDM applications; includes 1/2 5C Collet center height enhances modular system. Harig Large Grind-All Fixture No For large capacity work including punch grinding 2 dia. V-block capacity Large face-plate area Horizontal mounting arrangement Optional rotary table mechanism High quality tool steel construction for tenths accuracy and long life EDM & ACCESSORIES HARIG Uni-Dex Ultra Precision Collet Fixture 2 mounting holes for easy set-up 24 divisions allows positioning in every seconds accuracy 2.2" diameter hub for quick interchange of accessories 5C collet confi guration, holder ground in assembly to under " runout Tool steel housing w/ intergral ball & race bearing for highest accuracy Dial graduation 360 o ; Complete w/ 1/2" 5C collet Weight: 11 Lbs Optional Accessories: Face Plate (5 dia. w/ adapter shank) Jaw Chuck (w/ adapter shank) Magnetic Chuck (w/ adapter shank) Accessories No. 5C-V Center Height Graduations Collet... 5C & 5ST V-Block Attachment / 4 dia. Purge Port... 1/8-NPT tapped entry Index Divisions... 24, every 15 ± 10 sec. Weight lbs Ultra-Grind Motor (variable speed w/ control, bracket & belt) HARIG Grind-All Fixture No.1 Rough turn, cylindrical grind, grind rectangular and radii with ± accuracy 24 Index division & 360º graduation Comes with carrying case Back View Optional Accessories: Ultra-Grind Motor Attachment (50-550rpm) Face Plate (5 dia. w/ adapter shank) Jaw Chuck (w/ adapter shank) Magnetic Chuck (4-3/4 dia. 2-1/4 thick) V- Block capacity: 1-1/4 Center height: Optional Accessories: Super Wee-Blocks (holding ~9/32 ) Ball-Seat Punch Adapter Face Plate (6 dia.) Magnetic Chuck (4 dia.) Hite-Angle Plate (9-1/2 x5 x4 wide) Grind-All No.2 w/ standard face-plate & v-block Radius Dresser Arm Grind-All No.2 w/ V-Block... 2 standard face-plate, Face-Plate Diameter 6 7 / 8 v-block & rotary table Center Height Index Divisions Graduation Net Weight lbs. Graduated in 360 V-BLOCK slides in face-plate and is also easily removable FACE PLATE is 6 7 / 8 in diameter and has tapped holes for mounting purposes. Adjustable Stops and PIN to permit stopping of swing at any desired angle. Use spacer to set at any desired angle using the sine principle. Index & Rotary Table Work Face Plate Work HAND CRANK for easy rotation and is removable when mounting unit horizontally. LOCKING SCREW to lock plate at any angle. OPTIONAL ROTARY TABLE MECHANISM Handwheel easily removed when not in use. Optional Rotary Table Mechanism available providing a geared arrangement for rotating face-plate. This rotary table arrangement is ideal for light milling and for rotary grinding. 24 division index allows for index table work. Plate is 6 7 / 8 dia. Easily mounts on Surface Grinder, Milling Machine, Jig Borer, etc., for precision face plate work. Use for generating a radius or for indexing with 24 division index. Also can be set to any angle with built-in sine arrangement. Face-plate has tapped holes for easy mounting. Submersible Spin-Grinding Fixture With the Imperial Newbould Grindit Spin Fixture you are able to: spin grind, install radii and angles, use on a milling machine, submerge in EDM fluid, and inspect angles or roundness. Wt. IM lbs Motorized Spin-Grinding Fixture for Installing Radii and Angles Includes: #300 GRINDIT with 5-C insert, collet nut & 2 stops V-Block Package with clamp, screws & rails Motor Package with mount, screws & 3 drive belts Partstop for use with V-Block Partstop for use with collet Wooden Case include with complete package Specifi cations: Spindle Roundness 50 millionth TIR Defl ection +/ /4 Out Topside Shotpin 10 arc-second repeatability Center Height /-.002 from bottom Thru Hole 1-1/4 plus Weight 14 lbs Base Size 3-1/2 x 4 Height 5 Bottom Holes 2-1/2 centers Material Available in A-2 or 440C Stainless Steel V-Block 1-1/2 Distance Between V-Block Keys V-Block Width HARIG Twin Angle Holding Fixture For holding electrodes on an EDM machine Hardened & Ground to a tenth s accuracy Two models available with removable ground shanks, 2 long, in two diameters: 3/4 or 20mm. Complete with Shank & Clamp V size /8 x2 7/8 and 1 3/8 x1 7/ /4 x 2 1/4 and 2 1/4 x 2

36 Ultra precision collet chucks made of special tool steel, hardened & ground to assure maximum accuracy. (concentricity at 2 from collet) Mini design allow access to otherwise hard to reach spots and help to reduce small tool breakages Self-releasing eliminated tools sticking in collets. O.S. WALKER EDM Workholding Chucks O.S. WALKER Ceramax Permanent Magnetic Chuck O.S. WALKER Fine Division Long Bar Pole Electromagnetic Chuck Sets include: φ20mm shank chuck-holder spanner & fi tted case ER16 10pcs set: 1/32, 1/16, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8 ER20 12pcs set: 1/16, 3/32,1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2 Gromax ER Collet ER11 ER16 ER20 ER25 ER32 ER40 EDM & ACCESSORIES φ20mm ER Collet- Chuck Set Description #of colletchuck per set Shank length 3R Precision Electrode Former FC750 with 3R Manual Chuck (3R S) Wt lbs 5010 ER16 10 PCS 50mm ER16 10 PCS 100mm ER16 10 PCS 150mm ER20 12 PCS 60mm ER20 12 PCS 120mm ER20 12 PCS 180mm 3 FC750 Weight 16 lbs One piece body construction; Hardened tool steel throughour; 3R Manual Chuck 3R S in Places; Revolving type handle for easy rotation. Full magnetic surface to all edges - powerful holding over entire chuck surface Fine pole divisions - for more uniform magnetic holding of small parts Simple and inexpensive tooling designs Solid construction top plate - protects permanent magnetic pack from penetration of EDM fl uids. Provides stronger, more rigid work surface Lowest height of any electric chuck - for added clearance on larger workpieces Magnetic fi eld does not affect EDM operation No complicated set-ups Accurate repeatability Size Height Watt. Wt. (lbs.) LBP48 4 x8 2-7/ LBP410 4 x10 2-7/ LBP510 5 x10 2-7/ LBP512 5 x12 2-7/ LBP610 6 x10 2-7/ LBP612 6 x12 2-7/ LBP614 6 x14 2-7/ LBP618 6 x18 2-7/ LBP815 8 x15 2-7/ LBP818 8 x18 2-7/ LBP820 8 x20 2-7/ LBP824 8 x24 2-7/ LBP x15 2-7/ LBP x18 2-7/ LBP x20 2-7/ LBP x24 2-7/ LBP x18 3-1/ LBP x24 3-1/ LBP x32 3-1/8 281 Automatic Release Control Touch pad control allows easy selection of full, residual, variable, and release positions Automatic release cycle assures workpiece release, freeing machine operator from manual operation Input 115VAC/ Output 0-110VDC Manual Release Control Maximum reliability - Printed circuit boards plug in for ease of service Conveniently located control dial and switch simplify adjustment 0-100% variable holding power adjustment Easily mounted with external tab Input 115VAC/ Output 0-110VDC Watt. Wt. SMART-1B lbs SMART-3B lbs SMART-5B lbs Watt. Wt SCV lbs Full magnetic surface to all edges - powerful holding over entire chuck surface Fine pole divisions - for more uniform magnetic holding of small parts Solid construction top plate - protects permanent magnetic pack from penetration of EDM fl uids. Provides stronger, more rigid work surface Lowest height of any permanent chuck - for added clearance on larger workpieces Magnetic fi eld does not affect EDM operation Can be used inverted for holding electrode ram Easily installed and operated No complicated set-ups Accurate repeatability * Two handles Size Height Wt. (lbs) CER44 4 x4 2-3/8 13 CER48 4 x8 2-3/8 25 CER510 5 x10 2-5/8 36 CER512 5 x12 2-5/8 45 CER x /8 33 CER610 6 x10 2-5/8 45 CER612 6 x12 2-3/4 56 CER614 6 x14 2-3/4 66 CER618 6 x18 2-3/4 84 CER815 8 x15 2-3/4 94 CER818 8 x18 2-3/4 113 CER820 8 x20 2-3/4 131 CER824 8 x24 2-3/4 150 CER x15 2-3/4 118 CER x18 2-3/4 131 CER x20 2-3/4 163 CER x24 3-5/8 175 CER1030* 10 x30 3-3/4 306 CER x18 3-5/8 206 CER x24 3-5/8 250 CER1236* 12 x36 4-5/8 563 CER1248* 12 x48 4-5/8 630 O.S. WALKER Magnetic Fixture/ Sinker EDM Made of Neodymium-Iron-Boron rare earth magnet Can be immersed in dielectric fl uid Precision ground fl at, square and parallel to an accuracy of.0005 ON/OFF switch with removable handle Size(inch) WML 2 1/2 x2 1/2 x5 1/8 Call

37 GROMAX Permanent Magnetic Chuck for EDM and Surface Grinder Micro pitch pole spacing Low profi le & strong rare-earth magnet Variable holding position with removable on/off activation handle Ultra thin chuck only 1.77 thick Thin & light weight work piece are ideally suitable because of fi ne-pitched magnetic poles KRTW Series 10 Pole per inch Oil-proof type is specially designed for EDM Double-Face Attracting Permanent Magnetic Block [ KPB] EDM Low Profile Oil Proof Oil Proof Type RMWH-3060A Shown Micropitch Permanent Magneic chuck Application: The double-face attraction can fi x work in any location on the table with switch operation. Mounting position can be easily adjusted and any work can be held precisely by using 3 blocks of large, middle and small sizes. Widely usable as a holding fi xture of any type of work, not only for electro-discharging work. KPB-2F15B KRTW: Fine pole Permanent Magnetic Chuck RMWH: Micropitch Permanent Magneic Chuck Nominal Wt. Dimension LBS 3 X5 7 RMWH-713B 4 X 7 12 KRTW1018A RMWH-1018B 4 X10 18 RMWH-1025B 4 X12 21 RMWH-1030B 5 X10 22 RMWH-1325B 6 X 6 15 KRTW1515A RMWH-1515B 6 X KRTW1530A RMWH-1530B 6 X KRTW1535A RMWH-1535B 6 X KRTW1540A 6 X KRTW1545A RMWH-1545B 8 X KRTW2035A RMWH-2035B 8 X KRTW2040A RMWH-2040B 8 X KRTW2045A 8 X KRTW2050A RMWH-2050B 8 X KRTW2060A RMWH-2060B 10 X KRTW2525A RMWH-2525B 10 X KRTW2530A RMWH-2530B 12 X KRTW3050A RMWH-3050B 12 X KRTW3060A RMWH-3060B Double-Face Attracting Permanent Magnetic Chuck [: RMWH-2F] EDM & ACCESSORIES Magnetic force of work face (top) and mounting face (bottom) is controlled individually with the removable ON/OFF handle. Constructed for water proffness. Precision: Flatness in (0.015mm), Parallelism in (0.03mm) The work can be attracted in any size by combining the magnetic block. Powerful magnetic block never disturbs the operation and the magnetic force can switch ON/OFF by a turn of the removable handle. The set includes one pair of blocks. (Parallelism is within ) Water-proof constructed. Double-face attraction permits the setting of the work freely, at any position on the machine table. Nominal Dimension Holding Power Dimension Mass Width Length Height KPB-2F15B 2.0 x N lbs.x2 KPB-2F20B 2.0 x N lbs.x2 KPB-2F30B 2.0 x N lbs.x2 Nominal Dimension Mass Dimension Width Length Height RMWH-2F.1530A 6 x LBS GREEN Synthetic EDM Fluid The Only EDM Dielectric With Chemical Satellite Electrodes, Putting The Green In Your Machines Cut Faster & Less Electrode Wear What Makes Green Different? Faster fi nishing rates, a result of even spark distribution Pure synthetic product eliminates frequent oil changes Eliminates DC arcing & dead zones Ends Skin Irritation No hazardous ingredients - safe for environment and your skin 99.99% Odorless Reduce Electrode Wear Increase Metal Removal Rate of 15% Reduces electrode wear up to 30% Improve Surface Quality. Description GSEF55 55 Gallon Drum GSEF5 5 Gallon Container Shipping from east or west coast warehouse. Please call for more details! IonoPlus IME-MH Royal Flush Semi-Synthetic EDM Fluid Low viscosity with excellent non-clogging fl ow and backwash characteristics due to highly refi ned base stock Superior resistance to ultraviolet light (will not discolor) Much more stable fl uid, higher fl ash point, pour point of -54 C EPA tests on all components show non-sensitizing, non-toxic, and non-irritating High dielectric strength Non-detectable odor 3~4 times the oxidation stability Description RFEF55 55 Gallon Drum RFEF5 5 Gallon Pail GROMAX 5 Micron Filter 2 1 / 8 ID 6 OD 18 FLT-FT can be used for Easco, Sparcatron, Elox, Eltee, Gromax, Maximart, Sodick, Xermac FLT-FT /ea FLT-SUTE /ea IonoPlus vs. Royal Flush IonoPlus Appearance Fluorescent green Royal Flush Clear bright Specifi c Gravity 0.79 g/ml 0.83 g/ml Vapor Density 6.0 Lbs./gal. 6.9 Lbs./gal. Flash Point (c.o.c) 243 F 266 F Pour Point -15 C -54 C 5 Micron, pleated paper media, Buna grommet seal, service handle, wire mesh outer body 1 1 / 4 ID FLT-SUTE can be used for Agie-Mondo Series, Charmilles Roboform Series, Chevalier, CHMR, 14 Hansvedt, Pacifi c Controls, Santec/Sharp 6 OD

38 EDM & ACCESSORIES EROWA EDM Basic Tooling ITS Repeatability: 2μm Owing to the combination of flexing and rigid components patented wordwise. Set A: ER Set C: ER ER ITS Basic chuck 50 1 ER Spigot LC Manual 1 ER Prisround 1 Plastic Packing Box 1 Set B: ER ER ITS Basic chuck 50 1 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet, φ105mm 1 Plastic Packing Box 1 EROWA EDM Compact Tooling The small, accurate, automatic tooling system for Micromechanics and EDM ER The standard mechanical interface between milling, grinding, turning, drilling, EDM die-sinking centers and measuring or presetting stations. The economical tooling system with a high degree of precision and repeatability for flexible production. The correct procedure to benefi t from the EROWA Tooling Sets: Drill holes and cut threads as required to mount electrode onto ITS electrode holder Clamp into lathe chuck or mill chuck and machine Clamp into EDM chuck and start EDMing The center point stays with the electrode, as long as it is kept on the holder Every tooling set is compatible and will fi t into later investment ER ITS Basic chuck 50 Wt Lbs Set D: ER Centering Plate 50 Version: Set of 50 plates, rust-resistant, including 4 supporting feet each Application: small electrode weight Fixation: Mounted directly on plane surface of blank Accuracy: 0.002mm ( ) guaranteed through fl exible centering Store capacity: 900 electrodes per square meter 4 x 90 indexable Parts size up to 50 x 50 x 100mm Designed for automation ER Compact-ITS adaper chuck ER Compact chuck ER Table pneumatically activated Compack chuck PA ER ER ER ER ER ER ER ITS Basic chuck 50 2 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet, φ105mm 1 ER ITS Basic Plate 1 Plastic Packing Box 1 ER ITS Basic chuck 50 2 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet 120x170mm 1 ER ITS Basic Plate 1 Plastic Packing Box 1 Compact checking pin Compact uniholder Compact- prisround 15mm Compact electrode holder 16mm Compact collet chuck holder Compact standard holder Set E: ER ER ITS Basic chuck 50 2 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet, φ105mm 1 ER ITS Basic Pallet 120x170mm 1 ER ITS Basic Plate 1 Plastic Packing Box 1 ER ER High Performance Compact Design Economical ER ER ER ER ER ER ER Compact Electrode Holder Set Article no. Description No. of unit Stud bolt M5x Stud bole M5x Stud bolt M5 x 6 16 ER Compact Prisround 10mm 4 ER Compact Prisround 15mm 4 ER Compact Uniholder ER ER Compact Electrode holder φ8mm 2ER ER ER Compact Electrode Holder φ12mm 2 ER Compact Electrode Holder φ16mm 2 ER Compact standard Holder 6 ER ER ER ER

39 3R Macro Combi Macro Combi provides simutaneous access to Macro and Macro Junior Systems 2 sizes of electrode holder in the same chuck! Macro - With the highest accuracy on the market for large electrodes Macro Junior - Large enough for the majority of all electrodes. The small size permits Macrojunior to machine very deep cavities. Starter Kit US S Includes: Description qty 3R manual combi machining block 1 3R Macro control rule 1 3R Macro combi drawbar 5 3R Junior combi drawbar 5 3R S Pallet Macro 54x54mm 6 3R-491 Junior electrode holder 30 3R-P14.5x14 self-threading screw for R-465-L Holder, macro Junior 2 3R-465-V Holder, macro Junior 2 3R S Intermediate plate, Macro 54x54mm 2 3R S Holder, Macro 54x54mm 2 3R S Holder, Macro 54x54mm 2 3R-333-T20 Screwdriver, TORX 1 3R Torque wrench, 4Nm 1 2 Systems, One Chuck, No Adaptor Manual Combi Starter Kit contains the necessary tooling to get started with system 3R s New Combi System. Electrode Holder with 50 mm long, unhardened electrode-mounting part Manual chuck for vertical or horizontal mounting on machine table. Electrode can be indexed 4x90 3R Designed for use in turning electrodes. Comes with set screws for mounting on a lathe taper and centering adjustment. Electrode can be indexed 4x90 EDM & ACCESSORIES EDM Electrode Shanks per set 3R-322/50S (set of 30) 3R-322/50E (set of 30) Quality imiport 2050 (set of 10) 2050E (set of 30) Mini Block 322/50E 322/50S Manual Chuck 4x90 Electrode Holders EHV10 with 3R Reference Element Can be attached on to 3R Chuck; Vise mounted on 3R Reference Element (54x54mm). Length Width Jaw Opening Jaw Ht. WT. lbs EHV /16 2 3/16 1 1/ EHV10 3R R R-491 3R R Manual Combi Macro Control Rule Junior Electrode Marco Combi Juniro Combi Machining block Holder Drawbar Drawbar Electrode Holders (Can fit to 3R Mini Block) EH20: with φ20mm shank EH20S: Stainless holder Can be attached on to 3R Mini Block & other tooling; 1 mini vise can be mounted horizon-tally or vertically for different needs; HRC 60 Tollarance: Parallelism and Squareness are with / 4 Length Width Jaw Jaw WT. Opening Height lbs EH20 2-9/ /16 13/ EH20S 2-9/ /16 13/ EH20 EH20S GROMAX Electrode Holders EH25: with φ20mm shank EH25S: Stainless Holder Precision vise mounted on a φ20mm shank larger capacity. EH25 EH25S Length Width Jaw Jaw Wt Opening Height EH /16 1 7/ /16 5 Lbs EH25S 3 15/16 1 7/ /16 5 Lbs Tollarance: Parallelism and Squareness are with / 4 3R x90 Manual Mini Chuck For mounting on the machine spindle with the aid of universal adapter plate, 3R-A3620. Quick and exact mounting of electrode with accuracy of repetition inch/mm: / mm Indexing 4x90. Intermediate angle set with Vernier scale Connection for pressure/suction fl ushing through the electrode Hydraulic clamping of electrode For mounting on the machine spindle with the aid of universal adapter plate, 3R-A3620. Manual C-Axis Mini Chuck Quick and exact mounting of electrode with accuracy of repetition inch/mm: / mm Indexing 24x15. Intermediate angle set with Vernier scale Connection for pressure/ suction fl ushing through the electrode Hydraulic clamping of electrode 3R R-A3620 3R R-A3620

40 GRINDER & ACCESSORIES GROMAX SG-616M Manual Precision Surface Grinder Manual Toolroom grinder (6 x16 ) with microfeed mechanism SG-616M ( 6x16 ) W/ STAND. ACCESS GROMAX SG-250AHD 3 Axes Automatic Precision Surface Grinder Ball bearing table (8 x18 ) 3 axes automatic surfact grinder SG-250AHD ( 8x18 ) W/ M/S&C/S, P/D & PMC.... : SG616M : : SG-250AHD : GROMAX SG-1020AHD 3 Axes Automatic Precision Surface Grinder X & Z Turcite-B laminated ways (10 x20 ) 3 axes automatic surface grinder SG-1020AHD ( 10x20 ) W/ M/S&C/S, P/D & EMC : SG-1020AHD : GROMAX SG-63AHD Automatic Precision Surface Grinder Cycle controlled (12 x24 ) 3 axes automatic sufrace grinder SG-63AHD ( 12x24 ) W/ M/S&C/S, H/P/D & EMC. : SG-63AHD : GROMAX SG-84AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (16 x32 ) 3 axes automatic sufrace grinder SG-84AHD ( 16x32 ) W/ M/S&C/S, H/P/D & EMC GROMAX SG-510AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (20 x40 ) 3 axes automatic surface grinder SG-510AHD ( 20x40 ) W/ M/S&P/F, H/P/D & EMC... : SG-84AHD : : SG-510AHD : : SG-515AHD :

41 GRINDER & ACCESSORIES GROMAX SG-615AHD/ 620 AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (24 x60, 24 x80 ) 3 axes automatic surface grinder SG-615AHD ( 24x60 ) W/ M/S&P/F, H/P/D & EMC. SG-620AHD ( 24x80 ) W/ M/S&P/F, H/P/D & EMC... GROMAX SG-820AHD/830AHD/920AHD/930AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (32 x80, 32 x 120, 36 x120 ) 3 axes automatic surface grinder SG-820AHD ( 32x80 ) W/ M/S&P/F, H/P/D & EMC.. SG-830AHD ( 32x120 ) W/ M/S&P/F, H/P/D & EMC SG-920AHD ( 36x80 ) W/ M/S&P/F, H/P/D & EMC.. SG-930AHD ( 36x120 ) W/ M/S&P/F, H/P/D & EMC : SG-615AHD : : SG-620AHD : GROMAX Precision Surface Grinder Cartridge type spindle Precision class-7 paired & preloaded bearing Ball bearing table/ cable drive Double-V Turcite cross ways/ D-2 hardened & ground table ways Front mounted down feed handle for precision work Cast iron base Standard Accessories: Wheel balancing stand Wheel balancing arbor Wheel and fl ange Tool box and tools Flange extractor Diamond dresser Working lamp Paper Filter & Magnetic Separator speed L/MIN capacity Liter L inch W inch H inch pump HP outlet GTM /8 PF1/2 GTM /8 PF1/2 GTM /8 PF1/2 GTM /4 PF1/4 GTM /2 PF1/4 GTM /2 PF1/4 W Extra paper filter per roll(wxl) 20 x3600 appro. Made in Taiwan The coolant system has three divisions: 1) Upper Division is the paper room and the inlet water tank and magnetic separator are located in it. The paper fi lter is in 2) Middle Division to collet the dirt from grinding. And 3) Lower Division with drainer supplies clean coolant to the workpiece. The coolant will fl ow to the water tank when it cycles from the machine. Then it goes into the magnetic separator and automatic paper fi lter and leads to the lower division, the water tank. Over sized wheels Filtrate ferrous & non-ferrous solid content 30micron paper fi lter Motor wired 220V or 440V / 3 phase Excellent for manual or CNC grinders SG-1545 SG-2045 Work Table Surface Area (XxY) 17.7 x x7.8 Max. Table Travel (XxY) 10 3/4 x 22 Max. Grinding Surface (XxY) 6 X18 Max. Distance Between Center of Spindle to Table 18 Max. Table Load (Includes Magnetic Chucks) 500 lbs approx. Cross Feed on Hand Wheel (1 rev.) (1 grad.) Vertical Down Feed on Hand Wheel (1 rev.) (1 grad.) Wheel Speed / 60 Hz 3500 rpm 3500 rpm Wheel Dimension(O.D. x T x I.D.) 7 x 1/2 x 1-1/4 7 x 1/2 x 1 1/4 Spindle Motor 2HP 2 HP Packing Dimension 75 x51 x77 72 x 61 x 80 Optional Accessories: Parallel dresser 6 x 14 Magnetic chuck Dust suction collector with coolant system Coolant system Wheel fl ange GTM.M Motor for GTM Magnetic Separator & Coolant System L H1 W Feature: Filtrate ferrous solid content Motor wired 220V / 3 φ GT-MCA20 H2 Speed L L/MIN (in.) GT-MCA gal W H1 H2 Pump (in.) (in.) (in.) HP outlet /8 PF1 1 / 2 Dust-Collector Coolant System Dust-Collector Motor: 1/2 HP Coolant Pump Motor : 1/8 HP Packing Dimension: 22 x38 x32 : GTM6 GTM6

42 GRINDER & ACCESSORIES GROMAX Cutter & Tool Grinder (Monaset) With the combination of swiveling turntable and moveable offset slide provide versatile capability to be quickly set up. The grinder can accurately generate convex and concave radii of various sizes. Made in Taiwan MN2 with collet Specifi cation: General Swing over main slide (max. dia.) 12 Standard Accessories: 1. Wheelhead tooth rest assembly with extension bar 2. Grinding wheel guards with extension bar 3. Front stock support 4. Grinding wheel fl anges (set of 5). (4 standard and one extension fl ange) 5. Diamond holder bracket 6. Wrench for workhead 7. Tooth rest centering gauge 8. Adjustable tailstock support unit 9. Spanner for grinding wheel 10. Leveling blocks 11. Standard arbor 12. Screw drive 13. Set of wrenches 14. Double-end spanner 15. Set of 4 Index Plates for spiral lead mechanism 0,8,10 & 12 divisions 16. Tool box 17. Oil bottle Optional Accessories: (price: POR) 1. Straight cylindrical collets (Metric or Inch size) (A) Taper collets (set of 3): No 2,3,4 Morse taper (B)Metric: 3,5,6,8,10,12,16,20,25 & 32 m/m Inch:1/8,3/16,1/4,5/16,3/8,7/16,1/2, 5/8,3/4,7/8,1,11/8 & 11/4" Collet work (max. dia.) 1.25 Collet work (min. dia.) 0.12 Lead generated by spiral lead mechanism (min.) 1.81 Length between spindle nose and tail center (max.) 6 Grinding wheel (max. dia.) 4 Workhead Range Main slide travel 5.75 Offset slide travel (total) 5.25 Offset slide travel (front of center) 3 Offset slide travle (rear of center) 2.25 Horizontal plane (turnable base) 235 Vertical plane (above center) 40 Longitudinal slide travel 6 Vertical slide travel (total) 9.50 Vertical slide travel (above center) 4.50 Vertical slide travel (below center) 5 Cross slide travel (total) 7.50 Cross slide travel (front of center) 3 Cross slide travel (rear of center) 4.50 Spindle Speed Workhead (1 speed) 436 rpm Workhead (3 speed) 4000, 5729, 8000 rpm (motor rpm) Internal grinding attachment (3 speed) 16410, 23510, rpm (extra cost) Motors Workhead drive (AC) 1/4 HP; 1/2 HP Dimensions Area of base only 25 x26 Area of machine (including swivel/overtravel) 60 x67 Height from fl oor to center of workhead spindle Overall height with wheelhead raised Net weight (including motors and controls) 1525 Lbs. All Specifi cations are subject to change without prior notice Optional Accessories: MN2.4 Additional diamond truing tool with diamond nib MN2.5 Grinding wheel fl ange for mounting grinding wheel with 1/2 hole MN2.1 Large cutter radius grinding attachment MN2.3 Additional index plates for spiral lead indexing unit MN2.7 POR Additional straight cylindrical collets MN2.2 4 universal sixjaw chuck for workhead MN2.6 Spring-loaded index pawl for workhead index plates

43 GRINDER & ACCESSORIES GROMAX Universal Cylindrical Grinding Machine Automatic grinding cycle, rapid wheelhead approach and retraction, automatic coarse, fi ne feed, spark-out, wheelhead retract all in one setting! Suitable for plunge, traverse, and taper grinding. JMC400AGC Complete with Standard Accessories: Workhead (swivel type) H: Hydraulic table. Rapid approach & retraction AGC: Hydraulic table. Rapid approach & retraction, Automatic grinding cycle features coarse, fi ne feed and sparkout all in one setting. Suitable for plunge, traverse and taper grinding. Machine structure: Body made of Meehanite casting with honeycomb ribs providing extra rigidity Workhead: "swiveled 30 clockwise, 90 counter clockwise" Equipped with angular contact ball bearings Wheelhead: equipped with auto lube system to ensure accuracy and spindle life Accuracy: Repeatability " Positioning " Swivel headstock Lever operator tailstock Table swivel with dial indicator for taper grinding Coolant tank with splash guards Wheel fl ange & extractor Automatic lubrication system Wheel dresser Specification: JMC400 Distance between centers 16 Max. revolving diameter over bed Hydraulic tank-capacity Gal Coolant tank capacity 19 Gal Table Hydraulic Table Speed Traverse per handwheel rotation 0.5 / rev. Swivel angle-clockwise 7 Workhead & Tail stock Wheelhead Electric Motor Swivel angle-counter clockwise 12 Workhead work center taper No.4 Tailstock work center taper No.3 Workhead swivel angle-clockwise 30 Workhead swivel angle-counter 90 clockwise Workhead spindle speed 100,140,232, 302,364,504 rpm Grinding wheel spindle speed 2100,2500 rpm Grinding wheel size (OD. xwidthx ID.) 12 x 1.25 x 5 Infeed per graduation of handwheel Infeed per revolution of handwheel 0.08 Rapid infeed stroke 1.5/8 Wheelhead swivel angle ±30 Wheel drive motor 3 HP Workhead spindle motor 1/2 HP Hydraulic pump motor 1 HP Wheel spindle lubricator motor 1/4 HP Coolant pump motor 1/8 HP Slide way lubricator motor 1/8 HP Floor space 87 x 71 x71 Net weight 3960 Lbs. JMC600AGC shown Optional Accessories: For JMC400 Internal Grinding Attachment jmc point Steady Rest jmc point Steady Rest jmc point heavy load rest (a couple) NA 3-jaw Chuck w/mounting plate jmc jaw chuck w/ mounting plate jmc400.6 Permanent magnetic chuck w/ plate jmc400.7 Roll coolant magnetic chuck w/ plate jmc400.8 Paper band fi lter jmc400.9 Radius Forming Attachment jmc Angular Forming Attachment jmc Extra Wheel Flange jmc Spare grinding wheel jmc Static balancing unit jmc Carbide tipped full & half center (ea) jmc Work carrier jmc Grinding gage for manual sizing jmc Hydraulic wheel dresser holder (use when w/n I.D. attachment) jmc Wheel micro infeed attachment (for AGC model) jmc Hydraulic tailstock jmc400.20

44 GRINDER & ACCESSORIES GROMAX Universal Cutter & Tool Grinder Standard Equipment and tool cabinet: With the standard equipment alone, G40 is capable of grinding the following cutters; plain milling cutters, end mills, shell end mills, groove milling cutters, key way milling cutters, angular milling cutter, face mills (max. 8 dia) (200 mm), circular saws (max. 48 dia. ) (1200 mm), taps and Reamers. Specification: Swing over table 10 Distance between centers 27-1/2 Distance between workhead & tail stock 22-3/4 Workhead spindle taper one end -- other end ASA No MT No. 5 Table surface 5-5/16 x 37 Longitudinal movement of table 16 Cross movement of saddle 10 Table swivel +60 Graduation on end of table for taper +10 Vertical movement of wheel head 10 Wheel head tilts +15 Wheel head swivel 360 From wheel head spindle center to top of table 2 to 12 From wheel head spindle center to T-slot center line 6-1/2 to 16-1/2 Grinding wheel spindle speed 2600,3700,6200 RPM Grinding wheel spindle drive motor 1 HP Optional Equipments: G40.1 Cylindrical Grinding Attachment : Swing: 10 Main spindle speed: 310/370rpm Motor: 1/4HP This attachment is most suitable for straight or taper cylindrical grinding and for face grinding of various tools. G40.2 Internal Grinding Attachment : Internal spindle: 35,000 or 20,000rpm Length of hole up to 1 9 / 16 or 3 Range of bore: 5/16 3/4 or 1/2 2 This is generally used with the Cylindrical Grinding Attachment. This can be used for grinding internal tapers. G40.3 Spring Collet Chuck Size of collets: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1 This chuck can be mounted directly in the taper hole of the workhead ASA No.50. This is an indispensable attachment for small cutter grinding. Spring Collet Chuck for larger size cutters or adaptor for 5C collets is also available. G40.5 No.2 Radius Grinding Attachment : Radius: 0-1 Max. dia. of cutter: 11 3 / 4 An accurate radius on the corner of teeth canbe ground. Suitable for corner radius grinding of face mills and shell end mills. The position for grinding start is set by the micrometer to eliminate grinding error. G40.6 Dust Collector Motor: 1HP As a health measure dust collector should be connected to all machine. This accessory contributes toward operator safety and health by collecting dust particles fl ying off the grinding wheel during grinding. It is compact and consumes a minimum of fl oor space. G Workhead Indexing Attachment Includes one 24-notched index plate. Extra index plates: specify number of notches desired. Accurate indexing can be made quickly and easily by mounting the Indexing Attachment onto the standard workhead. This eliminates the need for a tooth rest which is normally required for grinding cutters. G40.9 Drill Pointing Attachment : Dia. of drill: 1/8-1 Convenient for precision grinding of drill tip relief angles. It can handle drills of 1/8 to 1. G40.10 Helical Grinding Attachment Taper hole: M.T. No. 4 Lead: 0- (stepless) Spindle turns twice max. Index: 24 (standard) Grinding dia.: max. 5 Grinding length: max / 2 (in case that helic angle is 0 ) Module (Hob): max. 8 Helix (Hob): max. ±8 This attachment is suitable for grinding the relief and rake angle of spiral cutters. G40.11 Extended Grinding Wheel Spindle 3 extension G40 Please visit for more parts list. G40.13 Face Mill Grinding Attachment : Max. dia of cutter: 18 This attachment comprises a base, swivelling horizontally with respect to table, and a workhead swivelling at a 15 angle. This construction simplifi es greatly the setting of elevation and depression angle. Rugged design gives the J-40 the capacity for grinding large size cutters and tools. G40.14 Surface Grinding Attachment : Width of vise: 4 Depth of vise: 1 Opening: 2 3 / 4 So called Universal Vise. It consists of a swivel vise and independent support provided between the vise and base. The intermediate support permits the vise to swivel 360 horizontally and vertically. G40.15 Wet Grinding Attachment Coolant pump motor: 1/8HP So called Coolant Supply System. It is conveniently Convenient when the extended spindle application is required. Spindle is also cartridge internal, surface and used for cylindrical, type and interchangeable with standard various cutters grinding spindle. works when necessary. G40.4 No.1 Radius Grinding Attachment G40.8 Lathe & Planer Tool Grinding : Attachment Radius: 0-2 : 3/8-1 1 / 2 (in case that max. dia. of cutter is 4 ) Convenient for Taper hole: grinding rake face M.T. No.5 and relief angles. or B & S No.12 The large work Convenient for grinding of ball end mills support provides and styli. It consists of two slide bases, an outstanding grinding capacity. This attachment is ideally suited to grinding cutters each with micrometer adjustment and a workhead. for lathes and planers. G40.12 Raiser-Block Height: 2 This attachment is used when the additional height of the workhead or workpiece is necessary for grinding. G40.16 Dust collector & wet grinding attachment G40.17 Hydraulic table feed attachment G40.18 Long reamer grinding attachment G40.19 Small end mill grinding attachment G40.20 Gear cutter sharpening attachment G40.21 C Collet closer

45 Diamond Wheel 100% Concentration TYPE 1A1 Straight Style Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Example: 8: Depth of Diamond (X)=1/8 150: Grit S: Made in USA, J: Import Quality S DIA TH. Hole Dia Made in USA Quality Import 4 1/16 1-1/ S J 4 1/8 1-1/ S J 4 1/4 1-1/ S J 5 1/8 1-1/ S J 5 1/4 1-1/ S J 6 1/16 1-1/ S J 6 1/8 1-1/ S J 6 1/4 1-1/ S J J 6 3/8 1-1/ S J 6 3/8 1-1/ J 6 1/2 1-1/ S J 6 1/2 1-1/ J 7 1/8 1-1/ S J 7 1/4 1-1/ S J 7 1/4 1-1/ J 7 3/8 1-1/ S J 7 3/8 1-1/ J 7 1/2 1-1/ S J 7 1/2 1-1/ J 8 1/4 1-1/ S J 8 1/4 1-1/ J 8 1/2 1-1/ S J 8 1/2 1-1/ J 8 3/4 1-1/ J 8 3/4 1-1/ J 10 1/ S J 10 1/ S J 10 1/ J 10 1/2 1-1/ J 10 1/2 1-1/ J S J S J 12 1/ S J 12 1/ S J 12 1/ J S S S S 14 1/ S J 14 1/ S J S J S J S J S J S J S J S J S J S J S J TYPE 1A1R Cut-Off Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit TYPE 6A2C Plain Cup Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit 6 for Baldor, Carboloy, Criterion, Delta, Ex-Cell-O, Hammond,Lemaire, Prosser, Sundstrand, Willey, Standard Electric Co. Dia. (D) TYPE 11V9 Flaring Cup Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) Th. (T) Th. (E) Insert (U) Dia. (D) Th. (T) Made in USA Hole dia. (H):1 1/4 U Quality Import Order # Order # S18024 S18024J S18079 S18079J S18025 S18025J S18088 S18088J Th (T) Rim (W) Made in USA Hole dia. (H):1 1/4 Quality Import Order # Order # 6 3/4 1/2 S61802 S61802J 6 3/4 3/4 S61803 S61803J 6 1-1/2 3/4 S61804 S61804J Made in USA Hole dia. (H):1 1/4 Quality Import Order # Order # 3-3/4 1-1/2 3/8 3/8 S S115002J 5 1-3/4 7/16 7/16 S S115003J TYPE 12A2 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Made Quality in USA Import Order # Order # Dia. (D) Th. (T) Rim W. (W) Th. (E) 4 1/2 1/4 5/16 S S121008J 4 1/2 3/8 5/16 S S121009J 6 1 3/16 1/2 S S121003J 6 1 1/4 1/2 S S121004J 6 1 3/8 1/2 S S121005J TYPE 15V9 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Made in USA Hole dia. (H):1 1/4 Quality Import Dia. Th Hole Insert Order # Order # (D) (T) Dia. (H) (U) 6 3/4 1-1/4 1/4 S S155001J TYPE 11A2 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit TYPE 12V9 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) Th. (T) Made in USA Quality Import Dia. Th. Rim W. Order # Order # (D) (T) (W) 3 7/8 3/8 S S105000J 4 1-1/4 1/2 S S105001J 5 1-3/4 3/8 S S105002J Insert (U) Back Angle (B) GRINDER & ACCESSORIES Hole dia. (H):1 1/4 Hole dia. (H):1 1/4 Made in Quality USA Import Order # Order # 3 7/16 1/4 30 S S106000J 4 1/2 1/4 30 S S106001J 6 3/4 3/8 30 S S106002J D H E T

46 GRINDER & ACCESSORIES CBN Wheel 100% Concentration TYPE 1A1 Straight Style CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) Th (T) Hole Dia. (H) Made in Quality USA Import Order # Order # 4 1/16 1-1/4 SC12031 SC12031J 4 1/8 1-1/4 SC12032 SC12032J 4 1/4 1-1/4 SC12033 SC12033J 5 1/8 1-1/4 SC12038 SC12038J 5 1/4 1-1/4 SC12039 SC12039J 6 1/16 1-1/4 SC12043* SC12043J* *1/4 (X) diamond depth *1/4 (X) diamond depth 6 1/8 1-1/4 SC12044 SC12044J 6 1/4 1-1/4 SC12045 SC12045J 6 3/8 1-1/4 SC12046 SC12046J 6 1/2 1-1/4 SC12047 SC12047J 7 1/4 1-1/4 SC12050 SC12050J 7 3/8 1-1/4 SC12051 SC12051J 7 1/2 1-1/4 SC12052 SC12052J 8 1/4 1-1/4 SC12055 SC12055J 8 1/2 1-1/4 SC12056 SC12056J 10 1/4 3 SC12057 SC12057J 10 1/2 3 SC12059 SC12059J TYPE 6A2C Plain Cup CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit 6 for Baldor, Carboloy, Criterion, Delta, Ex-Cell-O, Hammond, Lemaire, Prosser, Sundstrand, Willey, Standard Electric Co. Made in USA Quality Import Dia. Th. Hole Rim Order # Order # (D) (T) (H) (W) 6 3/4 1-1/4 1/2 SC61802 SC61802J 6 3/4 1-1/4 3/4 SC61803 SC61803J 6 1-1/4 1-1/4 3/4 SC61804 SC61804J TYPE 11V9 Flaring Cup CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Hole dia. (H):1 1/4 Made in USA Quality Import Dia. Th Th. Insert Order # Order # (D) (T) (E) (U) 3-3/4 1-1/2 3/8 3/8 SC SC115002J 5 1-3/4 7/16 7/16 SC SC115003J TYPE 12A2 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Hole dia. (H):1 1/4 Made in USA Quality Import Dia. Th Rim W. Back Order # Order # (D) (T) (W) (E) Th 6 1 3/16 1/2 SC SC121003J 6 1 1/4 1/2 SC SC121004J 6 1 3/8 1/2 SC SC121005J TYPE 15V9 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Hole dia. (H):1 1/4 Made in USA Quality Import Dia. Th Insert L. Order # Order # (D) (T) (U) 6 3/4 1/4 SC SC155001J TYPE 11A2 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) Diamond Wheel Cup Diamond Wheel Cup is also available in... Type 1EE1 Type 1FF1 Type 2A2T Type 6A2 Type 6A9 Type 6A2H Type 9A3H 14A1 Type DW Hones Type HH1 Type HH2 s Upon Request Specify the wheel type and number, hole diameter, grit size, grade, bond type, diamond concentration, diamond depth. TYPE 1EE1: Straight - E Face Diamond in Periphery Made in Quality USA Import Wheel Wheel Enclosed Diamond Dia. D Th. T Angle V Depth X 3 1/8 70 1/8 S14008 S14008J 3 1/4 60 1/8 S14009 S14009J 4 1/8 70 1/8 S14011 S14011J 4 1/4 60 1/8 S14002 S14002J 6 1/8 70 1/8 S14013 S14013J 6 1/4 60 1/8 S14004 S14004J TYPE 1FF1: Straight - F Face Diamond in Periphery Made in Quality USA Import Wheel Wheel Face Diamond Dia. D Th. T Radius R Depth X 3 1/4 1/8 1/8 S16003 S16003J 4 1/4 1/8 1/8 S16011 S16011J 6 1/4 1/8 1/8 S16007 S16007J 7 1/4 1/8 1/8 S16008 S16008J TYPE 2A2T: Cylinder - Threaded Holes Diamond in Rim Made in USA Quality Import Wheel Wheel Rim Diamond Dia. D Th. T Width W Depth X 10 3/4 1/4 1/8 S21006 S21006J 10 3/4 1/2 1/8 S21007 S21007J 10 3/4 3/4 1/8 S21004 S21004J 10 3/4 1 1/8 S21001 S21001J /8 SPD22181 SPD22181J /2 1/8 SPD22163 SPD22163J /8 SPD22164 SPD22164J 18 3/4 3/4 1/8 S21020 S21020J 18 3/4 1 1/8 S21003 S21003J /4 1/8 SPD22157 SPD22157J /4 1 1/8 SPD21893 SPD21893J TYPE 6A2: Plain Cup Diamond in Rim Wheel Dia. (D) Hold dia. (H):1 1/4 TYPE 12V9 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Th. (T) Hole Dia. (H) Wheel Th (T) Insert L. (U) Rim Width W Back Th. E Made in USA Back Angle (B) Diamond Depth X Made in USA Made in USA Quality Import Dia. (D) Th (T) Rim W. (W) Order # Order # 3 7/8 3/8 SC SC105000J 4 1-1/4 1/2 SC SC105001J 5 1-3/4 3/8 SC SC105002J Quality Import Order # Order # 4 1/2 1-1/4 1/4 30 SC SC106001J 6 3/4 1-1/4 3/8 30 SC SC106002J Quality Import 4 3/4 1/2 3/8 1/8 S61015 S61015J 6 3/4 3/16 3/8 1/8 S61012 S61012J 6 3/4 1/4 3/8 1/8 S61011 S61011J 6 3/4 3/8 3/8 1/8 S61001 S61001J 6 3/4 1/2 3/8 1/8 S61002 S61002J 6 3/4 3/4 3/8 1/8 S61003 S61003J

47 TYPE 6A9: Plain Cup Diamond in Periphery TYPE 6A2H: Plain Cup - With Bolt Holes Diamond in Rim TYPE 9A3H: Double Cup - With Bolt Holes Diamond in Rim Wheel Dia. D TYPE 14A1: Straight - Raised Hubs Diamond in Periphery Wheel Wheel Dia. D Th. T Hole Dia. H Rim Width W TYPE DW: Straight - Mounted on Mandrel Diamond Through Made in USA Back Th. E Diamond Depth X Made in Quality USA Import For Head /4 1 1/16 1/2 1/8 S61901 S61901J Wheel Dia. D Made in Quality USA Import Mode Mode Wheel Th. T Rim Width W Back Th. E Diamond Depth X for Hager B 6 1 1/4 1/2 1/8 S91901 S91901J 6 1 3/8 1/2 1/8 S91902 S91902J 6 1 1/2 1/2 1/8 S91903 S91903J for Hager s C & D 6 1 1/4 1/2 1/8 S91904 S91904J 6 1 3/8 1/2 1/8 S91905 S91905J 6 1 1/2 1/2 1/8 S91906 S91906J Made in USA Quality Import Wheel Wheel Hub Face Diamond Dia. D Th. T Dia. H Th. U Depth X 7 1/2 4 1/8 1/8 S S141002J 10 1/2 7 1/4 1/8 S S141003J Wheel Th. T Mandrel Dia. M Wheel Dia. D Wheel Th. T Mandrel Dia. M Made in USA 1/8 1/4 1/8 SDW144 3/8 1/2 1/8 SDW176 3/16 1/4 1/8 SDW152 1/2 1/4 1/8 SDW183 1/4 1/4 1/8 SDW160 1/2 1/2 1/8 SDW185 1/4 3/8 1/8 SDW162 5/8 1/4 1/8 SDW192 5/16 1/4 1/8 SDW167 5/8 1/2 1/8 SDW194 3/8 1/4 1/8 SDW174 3/4 1/2 1/8 SDW203 3/8 3/8 1/8 SDW /4 1/4 SDW216 TYPE HH1: Hand Hone Diamond insert One End Made in USA Quality import Length L Width W Th. T Length Insert L-1 Diamond Concentration Diamond Depth X 4 3/8 3/ /16 SDH-103-B SDH-103-BJ 4 3/8 3/8 1 1/ /16 SDH-104-B SDH-104-BJ 6 1/4 1/ /16 SDH-107-B SDH-107-BJ 6 3/8 3/ /16 SDH-108-B SDH-108-BJ TYPE HH2: Hand Hone Diamond insert Each End Made in USA Quality import Length L Wheel Dia. D Width W Wheel Th. T Th. T Back Th. E Length Insert L-1 Inside Flat K Insert Length U Diamond Concentration Diamond Depth X Diamond Depth X Made in USA Quality Import 3 1 1/2 3/8 2 1/4 1/2 1/8 S65001 S65001J 5 1 1/2 3/8 4 1/2 1/8 S65002 S65002J 6 1 1/2 3/8 5 1/2 1/8 S65003 S65003J /16 1/2 11 1/4 1/2 1/8 S65004 S65004J 4 3/8 3/ /16 SDH-203-B SDH-203-BJ 4 3/8 3/8 1 1/ /16 SDH-204-B SDH-204-BJ 6 1/4 1/ /16 SDH-207-B SDH-207-BJ 6 3/8 3/ /16 SDH-208-B SDH-208-BJ GRINDER & ACCESSORIES GROMAX Surface Grinding Wheel Standard Wheel Markings WA 46 K 8 V Abrasive Grit Grade Structure Bond Type Grade Very soft - Soft Medium D. E. F. G. H. I. J. K. L. M. N. O. P. Q. Medium Hard Very hard O. P. Q. R. S. T. U. V. W. X. Y. Z. Grits (CNS & JIS standard) Coarse 10, 12, 14, 16, 20, 24 Medium 30, 36, 46, 54, 60 Fine 70, 80, 90, 100,120, 150, 180, 220 Very Fine 240, 280, 320, 400, 500, 600, 700, 800 Ultra Fine 1000, 1200, 1500, WA: White Aluminum Oxide 32A: Monocrystaline Aluminum Oxide 93A: Combination of Ruby Aluminum Oxide and WA,SA GC: Green Silicon Carbide WA is very friable, fast and cool cutting, best for light grinding or steels of all types, tool and die steels. WA Type shown WA SURFACE GRINDING WHEELS (STRAIGHT TYPE) WA WHEEL: 7 x1/4 x 1-1/4 CTN of 1 CTN of 5 GRIT Specification ORDER# EACH EACH 60K WA-60-K-8-V WKK8V01 80K WA-80-K-8-V WMK8V01 100K WA-100-K-8-V WOK8V01 WA WHEEL: 7 x1/2 x1-1/4 GRIT Specification ORDER# EACH EACH 46H WA-46-H-12-V WIH12V02 46I WA-46-I-8-V WII8V02 46J WA-46-J-8-V WIJ8V02 46K WA-46-K-8-V WIK8V02 60I WA-60-I-8-V WKI8V02 60J WA-60-J-8-V WKJ8V02 60K WA-60-K-8-V WKK8V02 80K WA-80-K-8-V WMK8V02 100K WA-100-K-8-V WOK8V02 120K WA-120-K-8-V WPK8V02 WA WHEEL: 7 x3/4 x1-1/4 GRIT Specification ORDER # EACH EACH 46K WA-46-K-8-V WIK8V03 60K WA-60-K-8-V WKK8V03 80K WA-80-K-8-V WMK8V03 WA WHEEL: 7 x1 x 1-1/4 GRIT Specification ORDER# EACH EACH 46K WA-46-K-8-V WIK8V04 WA WHEEL: 8 x1/4 x 1-1/4 GRIT Specification ORDER# EACH EACH 80K WA-80-K-8-V WMK8V05 100K WA-100-K-8-V WOK8V05 WA WHEEL: 8 x1/2 x 1-1/4 GRIT Specification ORDER# EACH EACH 46K WA-46-K-8-V-7V WIK8V7V06 60K WA-60-K-8-V WKK8V06 WHEEL: 10 x1 x 3 CTN of 1 CTN of 5 GRIT Specification ORDER# EACH EACH 46K WA-46-K-8-V WIK8V07 WA WHEEL: 12 x1 x3 GRIT Specification ORDER# EACH EACH 46K WA-46-K-8-V WIK8V08 46J WA-46-J-8-V WIJ8V08 46I WA-46-I-8-V WII8V08

48 GRINDER & ACCESSORIES WA SURFACE GRINDING WHEELS (STRAIGHT TYPE)WA WA WHEEL: 12 x1 x5 GRIT Specification ORDER# EACH EACH 46K WA-46-K-8-V WIK8V09 46J WA-46-J-8-V WIJ8V09 46I WA-46-I-8-V WII8V11 WA WHEEL: 12 x1-1/2 x5 GRIT Specification ORDER# EACH EACH 46K WA-46-K-8-V WIK8V11 WA WHEEL: 14 x1 x5 GRIT Specification ORDER# EACH EACH 46J WA-46-J-8-V WIJ8V12 46K WA-46-K-8-V WIK8V12 WA WHEEL: 14 x1-1/2 x5 GRIT Specification ORDER# EACH EACH 46K WA-46-K-8-V WIK8V13 WA WHEEL: 14 x2 x5 GRIT Specification ORDER# EACH EACH 46J WA-46-J-8-V WIJ8V14 93A: Combination of Ruby Aluminum Oxide and WA, SA 93A Type shown 93A SURFACE GRINDING WHEELS (STRAIGHT TYPE) 93A WHEEL: 7 x1/2 x1-1/4 CTN of 1 CTN of 5 GRIT Specification ORDER# EACH EACH 46H 93A-46-H-10-V JIH10V02 60H 93A-60-H-10-V JKH10V02 93A WHEEL: 7 x3/4 x1-1/4 GRIT Specification ORDER# EACH EACH 46H 93A-46-H-10-V JIH10V03 93A WHEEL: 7 x1 x1-1/4 GRIT Specification ORDER# EACH EACH 46H 93A-46-H-10-V JIH10V04 GC Type shown GC SURFACE GRINDING WHEELS (STRAIGHT TYPE) GC WHEEL: 7 x1/2 x1-1/4 CTN of 1 CTN of 5 GRIT Specification ORDER# EACH EACH 80I GC-80-I-8-V GMI8V02 100I GC-100-I-8-V GOI8V02 PSA SURFACE GRINDING WHEELS (STRAIGHT TYPE) PSA WHEEL: 12 x1-1/4 x3 CTN of 1 CTN of 5 GRIT Specification ORDER# EACH EACH 46H PSA-46-H-10-VP QIH10VP10 PSA WHEEL: 14 x2 x5 GRIT Specification ORDER# EACH EACH 46H PSA-46-H-10-VP QIH10VP14 32A This premium single-crystal aluminum oxide grain is well suited for precision grinding of tool steels and heat sensitive steel. 32A Type shown 32A SURFACE GRINDING WHEELS (STRAIGHT TYPE) 32A WHEEL: 7 x1/4 x1-1/4 CTN of 1 CTN of 5 GRIT Specification ORDER # EACH EACH 120K 32A-120-K-8-V DPK8V01 150K 32A-150-K-8-V DQK8V01 32A WHEEL: 7 x1/2x1-1/4 GRIT Specification ORDER# EACH EACH 46H 32A-46-H-12-VP DIH12VP02 32A WHEEL: 8 x1/4 x1-1/4 GRIT Specification ORDER# EACH EACH 120K 32A-120-K-8-V DPK8V05 32A WHEEL:14 x1-1/2 x5 GRIT Specification ORDER# EACH EACH 46H 32A-46-H-10-VP DIH10VP13 GROMAX Tool Room Grinding Wheel GC: Silicon Carbide for general purpose and rough grinding of Tungsten Carbide and nonferrous materials GC TOOL ROOM GRINDING WHEELS 2-1A Type GC WHEEL: 6 x1 x1-1/4 CTN OF 1 CTN OF 5 WA TOOL ROOM GRINDING WHEELS 6A Type WA WHEEL: 4 x2 x20mm CTN OF 1 CTN OF 5 11A Type 12A Type GRIT Specification ORDER# EACH EACH 60I GC-60-I-V GKIV29 80I GC-80-I-V GMIV29 100I GC-100-I-V GOIV29 GRIT Specification ORDER# EACH EACH 80J WA-80-J-V WMJV23 WA WHEEL: 5 x1-1/2 x1-1/4 GRIT Specification ORDER# EACH EACH 60K WA-60-K-V WKKV25 WA WHEEL: 3-1/2 x1-1/2 x1-1/4 GRIT Specification ORDER# EACH EACH 60K WA-60-K-V WKKV22 WA WHEEL: 4 x1-1/2 x1-1/4 GRIT Specification ORDER# EACH EACH 60K WA-60-K-V WKKV24 WA WHEEL: 5 x1-3/4 x1-1/4 GRIT Specification ORDER# EACH EACH 60K WA-60-K-V WKKV26 WA WHEEL: 6 x1/2 x1-1/4 GRIT Specification ORDER# EACH EACH 80J WA-80-J-V WMJV27 WA WHEEL: 6 x3/4 x1-1/4 GRIT Specification ORDER# EACH EACH 60J WA-60-J-V WKJV28

49 Magnetic V-Block Application: Suitable to hold round steel for precision work in measuring, marking and grinding Two pieces fi nished to the same dimension are fi nished together for a set Finished in both standard and special class precisions ON/OFF switch makes it easy to operate and remove the block (pair for a set) Holding Power Applicable Diameter Dimension Weight B L H GCE lbs lbs.x2 GCE lbs lbs.x2 Magnetic Holder Application: Wide range of uses; especially for holding small workpieces and keeping on in cutting V-Block Vise V-Block Vise available in the following sizes: Holding Dimension Weight Power GMH-26S lbs. 1.02X1.02X lbs. GMH-60S lbs. 2.36X1.02X lbs. GMH-30R lbs. φ1.18x lbs. GMH-40R lbs. φ1.57x lbs. GMH-50R lbs. φ1.97x lbs. GMH-10H 6.61 lbs. φ0.39x lbs. GMH-18H lbs. φ0.71x lbs. GMH-25H lbs. φ0.98x lbs. GMH-10F 6.61 lbs. φ0.39x lbs. GMH-18F lbs. φ0.71x lbs. GMH-25F lbs. φ0.98x lbs. capacity V-Mark III ALP.3 1/16 to 11/16 dia. V-Mark IV ALP.4 1/16 to 1 / 8 dia. V-Mark V ALP.5 1 / 2 to 3 1 / 2 dia. 5 Cluster V-Block Cluster V-Block Vise fi ve position 1/16 to 11/16 dia. Also available in stainless steel Squareness and parallelism accuracy: L: 5 1 / 2 W: 1 3 / 4 H: 1 3 / 4 ALP5.6 4 Cluster V-Block Cluster V-Block Vise four position 1/16 to 1 / 8 dia. Also available in stainless steel Squareness and parallelism accuracy: L: 6 3 / 4 W: 2 1 / 4 H: 2 1 / 4 ALP4.7 ALP4.7S (Stainless) Right-On Pin Grinder Holds and positions pins of diameters from 1/16 to 3/4 for cut off and grinding purposes. Grinding chatter is eliminated because of the fi rm 1 1 / 4 of linear pin grip. It is fast to use in either a horizontal or vertical position with the same ease and repeatability. This 3 point pressure system not only allows for better pin grip but also gives a straight in-line positioning method. ALP.PRG HARIG Spin-Indexer (Manual) Sturdy and dimensionally stable cast iron housing Large preloaded ball bearings are durable and accurate - ideal for motorization 5C collet holder ground in assembly to under runout 24 division index plate with precision index pin locks in every 15 degrees to ± 30 sec. Draw sleeve for quick setup of collets and accessories Extended base for minimal defl ection even with heavier parts 1/4" diameter mounting hole on top of housing for diamond dresser Mounting holes on base of unit for use with Harig accessories Crank handle easily removed for motorized setup Unique design allows for mounting of variable speed motor in forward or rearward position Full repair service and replacement parts available Specification: Collet 5C up to 1 Center Height 4 1/8 24 division indexing +/- 30 seconds Spindle runout HARIG HO-VEE System Suburban Magna-Square (Motorized) Spindle parallel to base in 6 Motor 1/15 horsepower 110VAC Weight 17 Lbs Harig precise adjustable riser v-block system plus traveling height gage offers numerous workholding applications. Use with the Basic V-Block to hold workpiece securely and accurately. Use with a Multi-6 V-Block for end fi nishing of punches, core pins, plugs and EDM electrodes. Standard 8 posts with 5 width included. HO-VEE Riser : GRINDER & ACCESSORIES 6 x2 x1 3/4 height Has 6 V s with 1/2 diameter capacity Centers of V s : apart For end fi nishing of multiple parts Can be used vertically or horizontally as a stand alone Hardened and ground to tenths accuracy Multi-6 V-Block : V-Block capacity holds parts up to 1 in diameter Quick setup Includes strap clamp Hardened and ground to tenths accuracy Basic V-Block : Posts : A versatile tool for layout, inspection and squaring operations on a surface grinder Combines the advantages of a Universal Right Angle Iron and a Permanent Magnetic Chuck Energize magnetic face by turning recessed control bar Can be placed on any side for work-holding Heavy support rib provides structural strength and a carrying handle Made from class 40 cast iron, stress relieved and annealed Tolerance: all faces and ends of the Magna-Square and ground fl at, square and parallel within Length Width Height Wt MAI /4 4 1/4 6 1/2 18 lbs

50 GRINDER & ACCESSORIES Belt Type Oil Skimmer / Tube Type Oil Skimmer HD-820 HD-800 KANETEC Electro Magnetic Chucks Horizontal pitch type (Can use with GRD-505 chuck controller) Nominal Watt Dim. KESL X 8 26 KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X HD-800 Oil Skimmer Cap. 4 Liter/ hour Dimension (LxBxH) 7.5 x4.0 x6.0 Skimmer Belt size h1: 8.86 h2: 4.92 h3: 3.54 Hose Size OD=0.87, Length=23.6 Power single phase AC 110/200V Weight 5.72 Lbs Timmer Included HD-820 Oil Skimmer Cap. 1 Liter/ hour Dimension (LxBxH) 6.1 x3.1 x7.0 Skimmer Belt size l1: h2: 11.2 h3: 7.87 Hose Size OD=0.87, Length=5.90 Power single phase AC 110/200V Weight 3.3 Lbs Timmer Included Nominal Watt Dim. KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X KESL X Gromax Micropitch Electro Magnetic Chucks Micropitch for small and thin works. Pole Pitch: 4mm (1+3) Chuck Controller (for Rectify & Demagnetize) GRD-505 GRD-505 Suitable for standard type of electric magnetic chucks. With current capacity of 5A; demagnetizing time is 6-15 seconds. Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage. Suitable for any kind of electric magnetic chucks. GRD-510/515 Suitable for standard type of electric magnetic chucks. With current capacity of 10A and 15A; demagnetizing time is 6-15 seconds. Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage and GRD-505/515 current. Suitable for any kind of electric magnetic chucks. GRD lbs. GRD lbs. GRD lbs. GRD-520 5C Punch Grinder 5-C Punch Grinder fi ts in any 5-C collet fi xture. 1/16 to 7/8 dia. ALP.PG GRD-520 Suitable for super powerful type of big electric magnetic chucks and could control 2 chucks at the same time. With current capacity of 20A; demagnetizing time is 8-15 seconds. Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage and current. Attached fan inside for emitting heat. Suitable for any kind of electric magnetic chucks. Input Voltage Output Dimension (inch) Net (single phase) Voltage Current L W H Wt. lbs GRD-505 AC 110/220V DC 0-100V 5A GRD-510 AC 110/220/ DC 0-120V 10A /415/440V GRD-515 AC 220/380/ 415/440V GRD-520 AC 220/ /440V GRD lbs. DC 0-120V 15A DC 0-120V 20A Rotary Micropitch Electro Magnetic Chucks Micropitch for small and thin works. Pole Pitch: 4mm (1+3) Dimensions Watt. Weight (lb) GETW X GETW X GETW X GETW X GETW X GETW X GETW X GETW X GETW X E Dimensions K E Watt. Weight (lb) GETW-1530U 6 X12 145mm/ 418mm/ GETW-1535U 6 X mm/ GETW-1545U 6 X18 568mm/

51 Wheel Parallel Dresser E500 E250 GROMAX Vision Type Angle & Radius Dresser Accuracy Within Satisfaction Guarantee! GRINDER & ACCESSORIES GROMAX Rectangular Type Permanent Magnetic Chuck Super high quality!! : KMT Standard Pole E250 Weight 18Lbs E500 Circular housing ID: 3.66, Length: 4.33 E250.DS Dresser Stick for E250 E300.DS Dresser Stick for E300 Stroke:2.36 E250 Stroke:1.38 E500 Weight 25Lbs E300 E300 Weight 38Lbs Fixed focus lens (3X) 1 Vernier markings for dressing angle Magnifi cation through hole in the spindle makes it possible for operator to see how to dress the form on the wheel Radius & angle can be done perfectly tangent Accuracy Within Weight TDE 11Lbs. Length /4 Height Diamond Dresser Swing Arm DS-030 φ1/4"x2" Max. Grinding Wheel DIA. DS-040 φ1/8"x2" Convex Radius /8 Concave Radius Replacement Tangential Travel Optical Lens Weight LBS. TDE-LNS /ea. Radius and Angle Dresser TDB ANTEATER 4 Poles per inch Rectangular type most suitable for grinding operation; Easy to operate handle; Clamping logs are provided; Handle can pivot outward appro. 30 o ; Magnetic effective area expanded KMT Size inch Weight Lbs KMT1018A 4X7 15 KMT1025A 4X10 20 KMT1030A 4X12 24 KMT1325A 5X10 27 KMT1530A 6X12 35 KMT1535A 6X14 42 KMT1540A 6X16 48 KMT1545A 6X18 53 KMT2035A 8X14 55 KMT2040A 8X16 64 KMT2045A 8X18 72 KMT2050A 8X20 79 KMT2060A 8X24 95 KMT2550A 10X KMT2560A 10X24 KMT3060A 12X24 GROMAX Thin and Circular Permanent Magnetic Chucks Matco Sine Dresser Sine angle absolutely accurate This fi ne precision -made unit dresses grinding wheels to any angle from 0 ~ 60 degrees with new smoothness and accuracy Center to center is 2 Center tolerance is Max. cross feed is 1 3/16 : 50A Weight 50A 4Lbs Suburban Round Permanent Magnetic Chucks Standard pole- 1/4" poles & 1/8" separators produce deep fl ux lines for holding large and thick parts Use max-c-mag ceramic magnets provide 3 times the holding power of ordinary magnets Fine pole - 1/8" poles & 1/8" separators produce shallow fl ux lines for holding small and thin parts Wt TDB 29Lbs Positive setting of the diamond to absolute center with the special gage included with the dresser.; Simple, fast, accurate radius setting; no height gage or other set-up aids required. Radius is set on the grinder by measuring over the two pins or by inserting a gage block, as shown, for direct reading. Inside or outside radius is determined simply by sliding the dowel pin to the right for concave and to the left for convex.; 4x90 o graduation in full 360 o circle. 6 minute vernier reading. Chrome plated.; One push-pull type knob for radius and angle control and for safer and faster operations.; Accuracy. Extremely close tolerances are held in the manufacture of this tool, assured by hardening and precision grinding of all critical parts. Ways are chrome hardened.; Economy. Set-up and dressing time reduced to a bare minimum due to simplicity. Maximum wheel diameter standard 10 Internal radii 5/8 ~ 1-5/8 With rat - tail adapter 1/32 ~ 1-5/8 External radii. 0~1-5/8 Height from base to center 4-3/32 Tangent travel, Either side of center 1-5/8 Diamond dresser DS-010(φ0.4"x3.15"/.2CT) Fine Pole: Dia Wt (lbs) RMC-6FP 6 18 RMC-8FP 8 26 RMC-10FP RMC-12FP 12 Standard Pole: Dia Wt (lbs) RMC RMC RMC RMC RMC RMC RMC THIN AND CIRCULAR Pole Pitch: 2.5mm (1+1.5) Thickness H=50mm (1.97 ) DIameter Wt (lb) GMW-160R 160mm/ GMW-200R 200mm/ GMW-250R 250mm/ GMW-300R 300mm/ KANETEC Thin and Circular Type Magnetic Chuck RMCW-25 SHOWN Dia. RMCW-6 2 RMCW-10 4 RMCW-13 5 RMCW-16 6 RMCW-20 8 RMCW RMCW RMCW RMCW RMCW-60 24

52 GRINDER & ACCESSORIES KANETEC 3 Face Attractive Permanent Magnetic Mini Chuck MMW-3F70A SHOWN Dimension Holding Pole Pitch Power MMW-3F50A 2.2 X LBF 1.5 ( ) MMW-3F70A 2.8 X LBF 1.5 ( ) KANETEC Magnetic V-Block KMV-125 SHOWN Dimension Holding Power KMV-50D 2 X3 X2 33 LBF KMV-80D 2 X4 X2 44 LBF KMV-125C 2 X6 X4 51 LBF GROMAX Chamfering & Deburring Machine Simplifi ed operation Easy to be bevelled for any length made of steel, cast iron, nonferrous metals, plastics, acrylic, etc. GT-500A: With exchangeable carbide inserts makes cutting tools can be changed easily GT-500BR: The deburring processing is based on the principles of surface milling machine. The fi nish of the deburred surface is like the workpiece finish of the surface mill GT-500B: Can bevel or chamfer on tapered wheel and fl ange heat treated parts Extra Grinding Wheel GT500B-GW GT-600A: Can debur both soft and rigid materials with sand cloth roller SDK.GXX Extra Sanding Disc Ea. Grits: 24,36,40,50,60,80,120 Receive 10% discount when order 10 or more GT-500A1 (110V) GT-500B1 (110V) GT-500BR1 (110V) GT-600A GT-500A2 (220V) GT-500B2 (220V) GT-500BR2 (220V) Space Requirement 19.7 x x x x16.1 Weight 66.1 Lbs Lbs Lbs Lbs. Voltage 3 φ 220V or 1 φ 110V/220V 50Hz/60Hz Motor Output 1 HP Speed 3500 rpm Length of Guide Rails Height of Bevel 0~0.12 0~0.08 0~0.12 0~0.12 Bevel Angle 15 ~ changeable C&R Chamfering Machine Corner and Radius camfering NE W!!!! GT-500AQ1 (110V) GT-500AQ2 (220V) Space Requirement 19.7 x12.6 Weight 66.1 Lbs. Voltage 3 φ 220V or 1 φ 110V/220V 50Hz/60Hz Motor Output 1 HP Speed 3500 rpm Length of Guide Rails 19.7 Height of Bevel 0~0.12 Bevel Angle 15 ~45 changeable Ultrasonic Lapping Machine Applications: Long time operation without overheating; To lap & mirror fi nish various of plastic, diecast, press and stamping mold; Quickly remove the hardened layer on the surface of mold or die caused by EDM operations; To work on hard to reach area such as the bottom or rib of gaps or slits, the corner edges and complicated shape areas. Specification: GT-404 Power Unit GT-202 Power Unit GT-202 GT-404 Power output 30 Watts Max. 45 Watts Frequency 22KHz Self-adjust frequency 5 level selection Adjustable frequency 12 level selection Amplitude 4~38μm 4~38μm Special Feature Automatic Trace system Automatic Trace system Auto down circuit system for DC 30V motor; DC 30 V output socket can be connected to rotary grinder or vibration sander (optional) Cord Length 1.5m 2.0m Standard Accessories Power unit (1 set), Hand tool, Foot switch(1 set), Tightening jig & spanner (1 set), Tool box and Accessories (1 set) Detail contains in Tool Box MTF Series diamond fi les 4 pcs Metallic diamond tips: 2pcs Tool holder: 0.9t,1.2t, 3.2t, φ3.0 FA Series diamond: 4 pcs Super stone: 2 pcs Brass stick: 1 pc Optional Accessories for GT-404: Electric Grinder UM-216 UM-217 UM-232 UM-208 RE-35 Description UM ~15000 rpm 90 grinder UM ~15000 rpm 120 grinder UM ~30000 rpm rotary grinder UM ~8000 stroke/min, 0~1.6mm swing stroke lapper RE ~4200 stroke/min, 0~6 mm reciprocating stroke lapper Precision Air Grinder Foot Switch 0.61 W x 5.2 L; Furnished complete with 5 ft. fl ex hose & hose joint; Hose (I.D.): ; 1.9 CFM air consumption at 90 PSI recommend air pressure ; Super light weight and mini size; High speed, high precision and stable handling; 1/8 fi xed collet with long life bearing, Less heat build up Applications: For clean up burrs up casting, forging or plastics workpieces; For grinding engraving and polishing of various molds & dies; For smoothing of welding parts Tooling Kit Hand Tool Tooling Kit Foot Switch Hand Tool Cut Your Finishing Time Up To 60%! GT-202 (complete set) GT (tooling kit) GT-404 (complete set) GT (tooling kit) MCF-600 fi les: 1set, 20 pcs Metallic diamond tips: 2pcs Tool holder: 1.2t, 3.2t, φ3.0 Free Speed Weight at 90 psi JG ,000 1Lbs JG ,000 1Lbs

53 GROMAX Punch Formers Big Punch Former FC-900 Adaptable on surface grinder above 1.27 in 2 to clamp punches within φ2-3/4 for grinding various shapes V-block with fi ne tuning function can fi x workpieces steadily and accurately Max. clamping dia. is φ2-3/4 Excellent Quality with Affordable! Accuracy within Satisfaction Guarantee FC-350 with 30mm (1.18 ) through hole FC-350 shown FC350/450 One piece body construction Hardened tool steel throughout Single screw locks v-block in places Revolving type handle for easy rotation Concave & convex radius angular dressing of grinding wheels Standard Accessories: Dresser Arm Allen Keys Fitted Case Optional Accessories: FC-350 Angle Dresser (FC.ANGLE ) FC-350/FC-450 Lock Pin (FC.LPIN ) Diamond Dresser (DS-020 φ1/2"x2" /.35CT ) FC-450 with oscillating v-block for tangent dressing Wt. FC Lbs FC Lbs FC Lbs Extra Dresser Arm FC.ARM Angle Dresser Grinding wheel Grinding wheel Punch forming angular dressing radius dressing FC-450 shown FC-350 / FC-450 Max. Diameter Workpiece 1-1/4 Height To Center line 3 Dial Graduations 360 o in 1 o Increments Index Plate 24 Divisions V-Block 1 1/4 Roundness Parallelism & Squareness in 2 Hardness HRC 60 o FC-900 shown FC-900 Max. Clamping Dia. 2-3/4 in V-Slot Travel of V-Block 1-3/8 Quantity of Tooth 24 Accuracy of Disk 15 ±5 GROMAX Wheel Dresser TDC Diamond dresser DS-010(φ0.4 x3.15"/.2ct) The wheel dresser can dress 2 angles tangent to a radius in one continuous motion with.0001 (0.002mm) accuracy The wheel dresser with a micrometer feed 1 3/16 (38mm) travel. Specification: Extremely accurate: dress 2 angles tangent to a radius in one continuous motion to within Fast and easy setups: only tools needed are a micrometer and a wrench Setup to dress 2 angles takes less than 15 seconds. 1 radius plus 2 angles in about 3 minutes Dressing capacity up to 8 wheel Range of convex radii 0 ~ concave radii ~ Made of hardened & ground tool steel Height to center of diamond 6 1/2 Overall height: 7 Base dimensions: 4 3/4 x 3 1/2 x 1 1/4 Weight: 20 Lbs These are some of the forms obtainable with fluid motion dresser GROMAX Duplex Dresser Weight TDD 11Lbs Diamond dresser φ1/4"x2"/.2ct DS-030 Dress Both Sides Of A Grinding Wheel Precisely & Simultaneously.; Made Of Hardened Tool Steel HRC 60. Specification: Max. Width Max. Dressing Max. Dressing Graduation Of Wheel Depth Width 1-9/16 1-9/ GRIND WHEEL MIN. MAX. 0.2mm : TDC 40mm GROMAX Precision Electrode Former FC750 with 3R Manual Chuck (3R S) One piece body construction; Hardened tool steel throughout; 3R Manual Chuck 3R S in places; Revolving type handle for easy rotation. 0.02mm/DIV ER Collet Dividing Punch Grinder Having a ER32 as a main body, the ER Collet Dividing Punch Grinder has total of 7 collets from 0.16, 0.24, 0.31, 0.39, 0.47, 0.63, With 24 divisions, this punch grinder allows positioning in every 15 ±10 seconds accuracy. If processing is below 0.24, use the ER16 connection. The collets are from dia to GRINDER & ACCESSORIES Weight FC350-ER 23 Lbs. (include 7 collets) The base can be selected as a sine plate base. It is good for sine angle use. Sine Plate for N.W lbs. Punch Former L X W X H: 4.33 X 3.27 X 2.16 FC350-SER Center to center: 2 N.W lbs. FC350-SP 3 Jaws Punch Grinder Rotary Wheel Dresser Prolongs Grinding Wheel s Life. Give True cutting Surface On a Grinding Wheel. Easy To Use & No Set-Up Down Time. Blaze-Dried Lacquer Surface Finish. Axis Part is Fixed With Shaft Bearing For High Speed Rotation. Ideal For CBN Or Diamond Wheel. Also Known As Braking Dresser. Weight: 12 Lbs. Weight RD 12Lbs Extra Grinding Wheel RD#60 each Motor Rotary Wheel Dresser Coolant Resistance 3 jaws hole dia=0.63 Min. clamping Dia=0.079 Max. clamping Dia=27.56 FC Lbs FC750 Weight 16 lbs Weight RDM 12Lbs Length: Height: 3.46 Diameter: 3.15 Extra Grinding Wheel RD#60 each

54 GRINDER & ACCESSORIES Suburban Master-Grind Index Fixture Suburban Collet-Master Index Fixture Suburban Mini-Master Index Fixture Punch grinding, EDM Electrode forming, inspection as well as many other operation; V-Block & collet in one fi xture; 72 position index plate 5 o every index accurate to +10 arc seconds; Built-in sine bar for setting angles between index locations; Horizontal or vertical V-block mounting; Spindle runs in two heavy duty 4 tapered roller bearings; Max. spindle runout square & parallel within ; fi tted case included. Wt. MG-5CV-S1 22 Lbs Specification: Collet V-Block Through Height capacity capacity hole Base to center line any 5 C 1-5/8 dia 1-1/4 dia 3 Front-view with V-Block Optional Accessories: MG5-MD motor drive 1/15 HP, reversible, variable speed, 60 to 300 rpm.; Comes with mounting bracket motor pulley, drive belt & screws; can be mounted on either side of the index fi xture. MG5-MD Suburban Spin-Master Index Fixture Rear View Front view with V-block removed Runout on Hardened & ground spindle is " T.I.R. 3-7/8" x 4-5/32" base ground parallel to spindle 2-5/16" spindle travel for fl ute grinding Index plate with 36 ground holes for direct indexing in 10 steps & graduation in 5 o increments 10 vernier holes for 1 o indexing Use standard 5C collets Height to centerline: 2-3/4" Sides of base ground parallel to spindle axis Through Hole: 1-1/4 Wt. SM-5C 15 Lbs 48 position index plate to allow a hard index every 7.5 o, Accurate to +45 seconds of arc; Uses standard 5C collets; Spindle runs in two sealed, preloaded ball bearings; Maximum spindle runout: ; Hardened steel base plate is ground square & parallel with spindle axis within ; Height to centerline: 3 5/8 ; Overall Height 5 9/16, overall length: 6 1/2, width : 4 13/32 Wt. Specification: Through Height CM-5C 9 Lbs hole Base to center line 1-1/8 dia 3-5/8 Optional Accessories: Face plate & V-Block Specification: Face Plate V-Block Diameter 6-1/2 1-3/8 dia Suburban Vacuum Chuck Optional Accessories: Vacuum Pumps Wt VCP-14-MM 32 VCP-34-MM 54 Wt. CM-5C-FVB 15 Lbs Provide an excellent means to hold non-magnetic workpieces for machining or grinding ideal for graphite, copper, aluminum, silver tungsten, carbide and other EDM electrodes. Three 1/4 NPT holes for mounting vacuum gage, relief valve & hose. Comes with vacuum gage, relief valve and 2 side rails. Length Width Height Recomm. Wt Pump VC-66-S /4 1/4 HP 15 VC-612-S /4 1/2 HP 28 VC-618-S /4 1/2 HP 41 Oilless, motor-mount, rotary vane design for maximum performance Internal muffl er & fi lters. Filters can be easily removed & replaced Sealed, lubricated-for-life bearings require virtually no maintenance. Pumps have built-in thermal overload protection Each model includes a support base, fi ttings & 6 feet of reinforced vacuum hose. Electric Motor CFM Free Air at 10 hg at 20 hg VCP-14-MM 1/4HP, 115V, 1Ph VCP-12-MM 1/2HP, 115V/230V, 1Ph VCP-34-MM 3/4HP, 115V/230V, 1Ph position index plate allows an index in every 5 5/8" through hole Uses standard ER-25 spring collets Spindle runs in two sealed preloaded bearings Maximum spindle runout " Weight only 4 Lbs. Spindle can be secured for easy handling by stop button for easy tightening of collets Hardened steel base is ground square & parallel with spindle axis within " Overall Height: 3 Center Height: 1-7/8 Through Hole: 5/8 Length: 5-1/8 Suburban Master-View 14 Optical Comparator Quadra-check 2000 & ACU-RITE Reading Glass scales featured! MV-14-Q shown same as MV-14 but with better scales and 2-axis Quadracheck readout MV-14-Q MV-14 MV-14 shown Wt. MM-25R 4 Lbs Message display window All multipoint features (up to 50 stored) Preset and constructions Linear error correction Segmented linear error correction Versatile printouts 102 datum memory Storage of entire feature.0001 reading accuracy on x and y axis Glass is change resistant - will not change in size, shape, or density due to temperature variation over time 25 times fi ner accuracy than any competitor Repeatable accuracy Linear encoder continuously measures accurate positions Standard Accessories: 10x power lens Surface illumination Digital scales Overlay chart clips, etc. Optional Accessories: Description MV-14-20X 20X power lens MV-14-50X 50x power lens MV-14-BASE Cabinet base MV-14-CTR Stage center MV-14-VB V-block

55 Vortex 800 Dust Guard Housing Wheel Balancing Stand Max for 16 grinding wheel The wheel type balancing stand is made to last with endurance. This stand can be used for wheel up to 16 in diameter. For balancing, straightening and wheel alignment. No leveling, centering or set-up needed. Hardened & ground discs freely rotate on ball bearings. Weight WBS 37Lbs Wheel Type 7-11/ /32 Dust Guard Housing for Surface Grinder Includes guard & door ASM Vortex 800 fits to more surface grinders than any other dust guard! Installs easily in minutes Meets OSHA regulations which require surface grinders to be equipped with enclosure guards and an effective exhaust system Revolutionary Sliding Door design with lock to minimize loss of suction force by providing infi nitely adjustable door height for special grinding jobs Simplifi es wheel changing, measuring & visual inspection Features multiple indicator mounting holes Fully serviceable design allows easy clean out of vacuum channels for optimum effi ciency Precision die cast aluminum construction for strength and durability, and a reduction in weight over previous technologies. Fit to Grinder Bracket Harig 3 I.D Boyar-Shultz, Sharp 3 1/8 I.D Brown & Sharp 3 1/4 I./D Abrasive, K.O. Lee 3 3/4 I.D Mitsui 2pc+3 hole face mount Kent 2pc+3 hole face mount Chevalier 3 1/8 I.D Unit is adaptable to various length arbor (balancing arbor not included) GROMAX Cross Worktable 9-1/16 GROMAX Mini Punch Grinder Grind punch from as tiny as (dia.) x (length) LxWxH: 3 x3 x5 PG Wt. PGS 6Lbs Unit size (WxLxH) (Lever excluded) 6-7/8 x10-3/16 x2-9/ /32 Mounting surface (RL x FB) (6-7/8 ) x (3-9/16 ) of head 1-3/4 max. Roller speed 60 Hz Roller driving motor 110V/single phase/25w 11-13/16 Accuracy/roundness/concentricity Examples: Same principle, same accuracy ( guarantee). The Mini-Type Punch Grinder is designed especially for tiny punch operation. GROMAX Punch Grinder Punch grinder can be put on the surface of grinding machine for round punches ( ). It can be ground by putting among three rollers of punch grinder without checking the center. Wt PG 17Lbs Accuracy of roller within while turning right or left Accuracy of point A within and point B within while turning. GROMAX Motor Punch Grinder Coolant Resistance Wt. PGM 25 Lbs l D L d High accuracy cylindrical grinding work possible just by putting this economical unit on surface grinder No center alignment necessary, just put work on rollers Portable with singlehand, thus easily set on grinders With rollers motordriven, attention can be concentrated on table/ wheel feeds Work also can be formed in radius or taper D... 1/ d L... Max 10-1/4 (Double roller /4 ) l... 7/8 GRINDER & ACCESSORIES GROMAX 1 Tool Makers Vise Tool maker vise of mini type which can be put in a bigger vise to process the small and precise workpiece. Also it can be used in an E.D.M. machine and grinding machine. Squareness and parallelism within HRC 54~56 Harden. VI Material SK2 Length 2-9/16 Width 1 Jaw opening 13/16 Jaw height 3/8 Wt. VI 1 Lbs GROMAX Tool Makers Vise Clamping slots & 2 3/8 holes in base provide easy fi xing to angle plates; Ground V way; Square & parallel within.0002 Wt. V60 5 Lbs Material: SK2; Length: 4 3/8 ; Width: 2 3/8 ; Jaw opening 2 5/16 ; Jaw height 1 ; HRC55~60 GROMAX Tool Makers Vise Made of hardened steel Precision ground: parallelism and squareness ± on sides and bottom. On piece construction with a moveable jaw Positive downhold and quick positioning notches enable rapid set-up Same Great Quality New Low GROMAX Tool Makers Vise VI (Small) 1 Mini Vise Specification: (Taiwan) VB15 VB20 VB30 VB40 Length 3-15/16 5-1/2 7-1/16 8-7/8 Width 1-7/16 1-7/8 2-7/8 3-7/8 Jaw opening 1-9/16 2-9/16 3-9/ /16 Jaw depth 13/ /8 1-3/4 Weight 2 lbs 5 lbs 10 lbs 24 lbs (China) VA20 VA30 VA40 Specification: GST47 GST614 GST820 GST1023 GST1031 Table 4 x7 6 x14 8 x20 10 x x31.5 Base 5 x4 10 x12 12 x x x20 Travel 2 x3 6 x x10 10 x12 10 x20 Height Increment Wheel Flange for 7 or 8 Wheel For KENT Grinders E100 /ea. E100K /ea. (63AHD) VD-20 VD-30 VD-40 Material SK2 SK2 SK2 Length 6-1/8 7-1/8 9-7/8 Width 1-7/8 2-15/16 3-7/8 Jaw opening 2-3/8 2-15/ /16 Jaw height 1 1-3/16 1-1/2 Hardness HRC56~58 HRC56~58 HRC56~58 N.W. 7LBS 13LBS 24LBS

56 GRINDER & ACCESSORIES GROMAX Sine Vise Compound angles easily and quickly set.; Adjustments up to 46 degrees. The vise parallel precision and vertical angles in ; Between centers equal 5 inch SV-20 SV-30 Material SK2 SK2 Length 5-1/2 7-1/16 Width 1-5/8 2-7/8 SV-20 Jaw Opening 2-1/2 3-3/16 Jaw Height 3-1/32 3-1/32 SV-30 Hardness HRC 52~56 HRC 52~56 Angle 0 0 ~ ~46 0 Weight 7 LB 19 LB GROMAX Universal Vise Revolving 360 in horizontal plane and 45 in vertical plane; Aadaptable to precision grinding machine and boring machine for level and inclined face machining as well as boring at a certain degree of inclination; precision graduation for accurate reading GTV-2000 Width of jaw 2.75 Max. opening of jaws 3.16 Depth of jaw 1.18 Overall dimensions 7.7 x4.0 x5.8 (LxWxH) Weight 28 Lbs. GROMAX Grade Sine Plate Made of hardened tool steel HRC 55~62; Roll to eliminate step in base plate; Two hardened & ground side rails & one locking strap included; Locking strap remains below the top surface; Tapped holes in top plate; Parallelism & squareness within ~60 capacity. (GT-66 With T-Slots) LxWxH Center Weight roll dist. GT-47 4 x 7 x Lbs GT-66 6 x 6 x Lbs GT x 12 x Lbs GROMAX Compound Sine Plate LxWxH Lower Center roll dist Upper Center roll dist Wt lbs GT-C47 4 x7 x GT-C66 6 x6 x GT-C612 6 x12 x GROMAX Precision Mini Tilt & Swivel Vise Vise furnished complete with jig plate, which can be removed for grinding and milling. In addition, the swivel angle attachment may be removed for using as a plain vise.; Ideal for jig boring, jig grinding, : CL precision grinding as well as milling and drilling operations. Wt. Tolerance: CL 8 Lbs graduation are furnished on both tilting and swiveling Width Jaw Jaw Jaw Opening Depth Height CL GROMAX 0 ~60 Angle Plate 0 ~60 adjustable angle by locking the hex screw on the bottom; Squareness "; Angle accuracy 10"; HRC50~55 Dimensions Weight AP /16 x1-13/16 x4 3.8Lb AP-2 1-3/16 x1-13/16 x4 2.8Lb AP-3 1 x1-1/4 x3 1.5Lb GROMAX Magnetic Angle Plate Easy to use (like a dine plate) On EDM grinders, mills and drills adjustable angle Dimension LxWxH (3.5 x4.0 x1.8 ) Wt MAP 8Lbs GROMAX Magnetic Sine Plate Standard 4 poles per inch; Removable On/Off switch; Side rails & rails LxWxH Center Chuck Weight roll dist. height 47M 4 x7 x Lbs 66M 6 x6 x Lbs 612M 6 x12 x Lbs GROMAX Compound Magnetic Sine Plates Weight 66M2-WAY 60 Lbs 612M2-WAY 90 Lbs : MAP Suburban Sine Vise Fea- tures: Provides a quick and accurate means of holding a workpiece at an angle for machining or inspection Square & parallel within & Angled center channel provides extra jaw capacity Solid, one piece body Locking strap included Made from steel hardened tp Rc Movable jaw pulls into base at deg. to insure maximum holding power and hold down force, eliminating tilting and lifting Dual minute steps built into the gage roll allow setting small angles with standard gage blocks Dimensions Jaw Center Distance Cap. of Rolls SV /2 x3 x3-5/8 4-3/4 5 ±.0002 SV-337-S1 7-1/2 x3 x3-5/8 4-3/4 5 ±.0002 SV x4 x4-5/ ±.0002 SV-411-S2 11 x4 x4-5/ ±.0002 SV x6 x5-1/ ±.0002 SV-612-S2 12 x6 x5-1/ ±.0002 *S1 & S2 mean they are SineSet compatible, others are not Suburban Precision Vise & NC Vise V-411-NC & V-612-NC Vise shown Precision Vise V-411-S2 Shown Square & parallel within & Angled center channel provides extra jaw capacity Solid, one piece body Made from steel hardened tp Rc Movable jaw pulls into base at deg. to insure maximum holding power and hold down force, eliminating tilting and lifting NC s have bi-directional 11/16 keyways ground in bottom Dimensions V /8 x 2 x 2 3-1/4 V-225-S0 5-5/8 x 2 x 2 3-1/4 V /2 x 3 x 2-5/8 4-3/4 V-237-J 7-1/2 x 3 x 2-5/8 5 V-237-J-S1 7-1/2 x 3 x 2-5/8 5 V-237-S1 7-1/2 x 3 x 2-5/8 4-3/4 V x 4 x 3 7 V-411-S2 11 x 4 x 3 7 V x 6 x 3-7/16 8 V-612-S2 12 x 6 x 3-7/16 8 Precision NC Vices & Matched Pairs V-411-NC 11 x 4 x 3 7-1/2 V-411-NC-M 11 x 4 x 3 7-1/2 V-612-NC 12 x 6 x 3-7/16 8-1/2 V-612-NC-M 12 x 6 x 3-7/16 8-1/2 *S0, S1, S2 denote SineSet Compatible

57 GROMAX Rods Precision Cut-Off and Surface Grind Machine Cut off ejector pins and grind them to length in one set up. Fast, economic way to grind pins, rods, squares to lengths accurate to within.001. Depth mic. attachment lets you cut to desired length. V-groove clamping mechanism fi ts all sizes. Built in diamond dresser for easy dressing. Short pin fi xture available. Please call for more information. Cut off precision φ.98 x Rod Size (w/o Small Pin Fitting OD φ1mm~25mm Device) Shortest Rod (w/o Small Pin Fitting 60mm Device) Right angle precision φ.98 x Cut-off Sander Lamina x φ7.1 / 1.25 T x Dia. / Hole Grinding sander WA46K x 0.39 x0.2 x 0.79 RPM 3600 rpm Motor 3/4 HP Machine Size 17 x 14 x 20 Wt. RPC 200 Lbs The dimensions precision of cutting off the length of working piece are not subject to the effect of the difference of thickness of cuttingoff sander piece. During operation, the grinding sander may be micro adjusted and repaired without changing its dimensions. Dust / Mist Collector & Fume Exhauster Filter Dust Collector Covers a wide range of dust applications Filtration effi ciency of up to 99.9% on submicron particles Supplied with stack silencer and manual motor starter confi gurations and can be supplied with dust receptacles (optional) DST cabinet is a quick ship, plug and go model which does not include stock silencer CFM External Static Pressure (WG) Volt. (TEFC Fan Motor) HP /60/3 3/ /60/3 3 Dry Cartridge Dust Collector Covers a wide rage of dust application, high intermittent duty air cleaning by an exclusive 2 stage fi lter cartridge Filter is cleaned automatically when the unit is shut down reducing the amount of maintenance and making fi lter life longer This 99.9% effi cient unit is well suited for all machining applications including graphite Standard with manual motor starter The DST VS is a quick ship, plug and go model CFM External Static Volt. (TEFC HP Pressure (WG) Fan Motor) VS /60/3 1 VS /60/3 3 VS /60/3 5 Fume Exhauster GRINDER & ACCESSORIES Standard Accessories: Cabinet collector Motor starter Manual shaker Fan Standard Accessores: VS collector Auto-shake cleaning Motor starter Fan The tightness of belt may be automatically adjusted and controlled (the larger the resistance, the tighter the belt). CFM Volt. HP PT /60/1 1.5 Small Unit Moves Easily Roll It Where It s Needed The rapid positioning rule is in the unit of 0.79 and provided with a micro rule (0 to 0.98 ) of which the zeroing point is the dimensions at the rapid positioning point. Accessories: RPC.CW RPC.GW20M RPC.DD RPC.PIN RPC.300MM RPC.500MM RPC.FLG RPC.BLT Cut off Wheel Grinding Wheel Diamond Dresser Small Pin Fitting Divice Micro Meter (300mm) Micro Meter (500mm) Flange Belt Small Pin Fitting Device The rapid chuck is used to hold the work piece in place, opening or closing it is very quick, and φ is the same. When operation, a shaft with two tapered ends is used for transmission and characterized by high stability, low wearing rate and long life. MR. DEBURR 3 Cubic Feet Vibratory Deburring Machine De-burr, de-grease, clean & polish at the same time. Rust prohibiting alkyd enamel gloss gray fi nish Heavy gauge steel throughout all welded construction 6.5 cu.ft. available upon request Fluid recirculating system included: 7 gallon plastic container submersible pump, hook-up fi ttings, and inlet valve to adjust fl ow Specification: Inside Tank 31 x13 1/2 x13 (LxHxW) Motor 1HP 3450 RPM; 110v/ 60HZ/ single phase; 220V/ 3 phase upon request Lining All cast polyurethane; 90 durometer 1/2 in thickness 300 DB Discharge Ramp 22 from fl oor Weight 350 LB.

58 LATHE & ACCESSORIES GROMAX High Accuracy Second-Operation Machine 80 millionths spindle runout Fast lever collet chucking with single movement Hardened and precision ground special alloy steel bed ways Standard 5C collet closer The spindle is supported by 2 point preloaded precision angular contact ball bearings to absorb radial and axial forces. Spindle speed can be changed while the cutting Built-in coolant with sump and self draining oil pan Automatic driveshaft spindle brake Direct reading spindle speed indicator Tool Room Lathe Hardinge Compatible Spindle with Jaw Chucks 5 with Round 5C collets 1 1/6 with Hexagon 5C collets 7/8 with Square Chucks 3/4 with Step Chucks 1 1/16 ~ 6 Swing Over Bed 9 Double tool Cross Slide Travel 3 3/4 Turret Slide Travel 4 I.D. Turret Head 5/8 Spindle Speed Range 230 ~ 3500 rpm Motor 220V, 3 phase, 2speeds 1/2 HP Coolant Tank 12 L Machine Weight Lbs Machine Packing Dimentsion 75 x 33 x 68 Optional Accessories: 1. Extra double tool cross slide GS Straight and taper turning slide GS Vertical cut off slide GS End working slide 5-1/2 GS Chip and coolant shield GS Compound slide GS Screw feed tail stock GS Station Turret GS Compound Slide GS Double Tool Cross Slide 7. Handwheel Tailstock 8. Six-Station Turret GROMAX High Accuracy Tool Room Lathe Spindle runout 80 millionths Motor 1.0/0.5 HP 2 speed Max. swing over bed 11 Spindle speed 130~3000 rpm Spindle drive motor 1HP, 2 speed 220V Spindle capacity: w/ round 5C collets 1 1/16 w/ hex. 5C collets 7/8 w/ SQU. 3/4 w/ step chucks 6 w/ jaw 5 w/ expanding chucks 3 Spindle nose taper 10 Distance between center 18 Swing over carriage 9 Swing over cross slide 6 Cross slide travel 6 Compound slide travel 3 Tail stock spindle taper MT#2 English/ metric dual dial Quick change gear box with 36 range Set of 5 change gear Quick-action compound slide for threading Preloaded ball bearing lead screw Hardened precision ground spindle with taper nose, 1 1/16 collet capacity Independent electric control feed for carriage and cross slide Special alloy steel bed ways hardened & precision ground GT618 Optional Accessories: Vertical cut off slide GT618.1 Steady rest GT C emergency collet GT618.2 Follow rest GT618.7 Taper turning attachment GT jaw chuck GT618.8 Chip and coolant shield GT618.4 MT#2 precision life center GT618.9 Tapped face plate GT618.5 Fixture plate for 5 3 jaw chuck GT Fixture plate for 6 3 jaw chuck GT Headstock & Gear Box Dual Dial On Cross Slide Dual Dial On Toll Post Slide

59 LATHE & ACCESSORIES GROMAX Super Precision- High Speed Lathe GLA-1744/GLA-1767 GLA-2280/GLA MADE IN TAIWAN MADE IN TAIWAN Large 2-1/4 spindle bore is supported by 3 precision bearings featuring D1-6 Camlock mount (GLA1744 & 1767) Large 4-1/16 spindle bore is supported by 3 precision bearings featuring D1-11 Camlock mount (GLA2280 & 22120) Induction hardened ground bedways & gears Enclosed gear box Specifications GLA-1744 GLA-1767 GLA-2280 GLA Thread & Feed Bed Headstock Tailstock Bed Width /4 Total Travel of Top Slide 4 3/4 7 1/2 Swing over Bed Swing over Cross Slide 10 3/4 13 Swing over Gap /8 Distance between Centers /4 118 Number of Spindle Speeds 12 steps 12 steps Spindle Bore 2 1/4 4 1/16 Type of Spindle Nose D1-6 D1-11 Taper of Spindle Bore & Center MT No.6 x No.4 MT No.7 x No.5 Range of Spindle Speeds 35~2000 rpm (12 steps) 13~1200 rpm (12 steps) Cross Slide Travel 8 5/8 Compound Rest Travel 7 Max. Tool Size 1 Square Dia. and Pitch of Lead Screw Ø35mm 6mm/pitch or 4TPI Ø45mm 6mm/pitch or 4TPI Range of Inch Threads 2-72 TPI (44 kinds) 2-72 TPI (44 kinds) Range of Metric Threads mm (39 kinds) mm (39 kinds) Range of Longitudinal Feed (36 steps) ~0.039 (36 steps) Range of Cross Feed (36 steps) ~0.020 (36 steps) Tailstock Quill Diameter 2 3/8 2 15/16 Travel 6 7 Taper of Tailstock quill MT4 MT5 Motor Main Drive Motor 7 1/2 HP 10 HP Coolant Pump Motor 1/8 HP 1/8 HP Power 220V, 3 phase 220V, 3 phase Net Weight 3520 lbs lbs lbs lbs. Packing (Length x Width x Height) 90 x 42 x x 42 x x 59 x x 59 x 71 Atlas Workholding King Bore Oil Country 3 Jaw Universal Chuck Series 332EX Extra Heavy-DutySizes 20 thru 48 Sizes 20 to 48 Forged Steel BodyExtra Heavy Duty American Standard, Hard Top and Master Jaws.Gripping surfaces serrated for more holding powerlarge Thru-Holes StandardHardened Scroll Gear for long lifealso available with D1 camlock mounting Chuck Size No. Mount Thru Hole Max rpm s Approx. Weight A11EX A lbs A15EX A lbs A15EX A lbs A20EX A lbs A15EX A lbs A20EX A lbs A15EX A lbs A20EX A * lbs A20EX A * lbs A20EX A lbs A28EX A lbs * Optional 16 thru-hole Consult factory for 48 and larger sizes No. B1 O.D. GLA-1744/GLA-1767 Standard Accessories: 10 3 Jaw Chuck 12 4 Jaw Chuck Steady/Fellow Rest Inverter Controlled Motor Full Length Splash Guard Coolant System Gap Bed Face Plate Tool Box with Tools 4 Way Tool Holder Optional Accessories (GLA-1744/GLA-1767) GLA17.1 GLA17.2 GLA17.3 GLA17.4 GLA17.5 GLA17.6 GLA17.7 GLA17.8 GLA17.9 GLA17.10 GLA17.11 GLA17.12 GLA-2280/GLA Standard Accessories: 15 3 Jaw Chuck 20 4 Jaw Chuck Steady/Fellow Rest 4 Way Tool Holder Full Length Splash Guard Coolant System Gap Bed Face Plate Tool Box with Tools Rapid Travel Micro Bed Stop Taper Attachment Taper Attachment Installation Lever Type 5C Collet Closer JFK Import Collet Closer Sargon Digital Read-Out-44 Sargon Digital Read-Out-65 Sony Digital Read-Out-43 Sony Digital Read-Out-67 D.R.O. Installation Quick Change Tool Holder (Made in USA) Import Quick Change Tool Holder Optional Accessories (GLA-2280/GLA-22120) GLA22.1 GLA22.2 GLA22.3 GLA22.4 GLA22.5 GLA22.6 GLA22.7 GLA22.8 GLA22.9 Mount Type B3 Mount Recess Micro Bed Stop Taper Attachment Taper Attachment Installation Sargon Digital Read-Out-80 Sony Digital Read-Out-80 D.R.O. Installation Quick Change Tool Holder (Made in USA) Import Quick Change Tool Holder 120 Digital Read-Out Systems B4 Trhy Hole B6 Mounting Bolt Radius B15 Body Width J10 Master Jaw Length J11 Top Jaw Width J12 Top Jaw Height A11EX A A15EX A A15EX A A20EX A A15EX A A20EX A A15EX A A20EX A * A20EX A * A20EX A A28EX A

60 LATHE & ACCESSORIES Lux-Matter Precision Gear Head Engine Lathe LUX1340G LUX1340G MADE IN TAIWAN LUX1340G / LUX1440G ASA D1-4 spindle camlock nose with 1-9/16" spindle bore 3HP 220V 3 phase motor Bedways are hardened and ground with removable gap Full length splash guard w/built in coolant system Quick action foot brake system and pull out chip try Quick change total close gearbox for inch/ metric threading Spindle and headstock gears all hardened and precision ground LUX1340G / LUX1440G Standard Accessories: Main Motor 3 HP (LUX1340G) LUX1440G Capacities Swing over bed Swing over cross slide 8 9 Distance betweeen center Swing in gap Width of bed 8 10 Head Stock Spindle nose ASA D1-4 Spindle bore 1 9/16 Taper of spindle MT#5 Spindle speeds 42~2000rpm / 16 steps Threads & Inch threads 4-112T.P.I. (40 kinds) Feed Metric threads 0.25~6.0 (22 kinds) Module pitch threads 0.25~3.0M.P. (otional) D.P. Threads 8~112 D.P.(optional) Longitudinal feed range ~0.04 IPR Cross feed range ~0.02 IPR Leadscrew diameter / pitch 1 /4T.P.I Carriage Cross slide travel 8 1/16 Compound slide travel 3 3/4 4-way toolpost capacity 3/4 x 3/4 Tailstock Center taper MT#3 Quill travel / dia. 4 1/4 / 1 1/2 Power Main Motor 3HP/ 1.5HP, 3 phase Coolant pump 1/8HP Machine Dimensions Machine size (LxWxH) 74 x28 x58 75 x30 x58 Packing Size (LxWxH) 76 x29 x60 78 x30 x60 Net/ Gross Wt. Lbs 1900 / 2300lbs 2500 / 2900lbs Atlas Workholding Super Thin Square Chucks Stand with Chip Tray (LUX1440G) One-Piece Cast Iron Stand Foot Brake Back Plate (D1-4) MT#3 Center Reducing Sleeve Threading Dial Tool Kit & Box 4 Way Tool Post Complete Electrical Equipment Instruction Manual & Parts List Gap Bed Coolant System 3-Jaw Chuck 6 4-Jaw Chuck 8 Face Plate 12 Steady Rest 4 (LUX1340G) Steady Rest 4-1/2 (LUX1440G) Follow Rest Full Length Splash Guard LUX1440G Optional Accessories (LUX1340G): LUX13.1 Micrometer Carriage Bed Stop LUX13.2 Taper Attachment LUX13.3 Taper Attachment Installation LUX13.4 Sargon Digital Read-Out LUX13.5 Sony Digital Read-Out LUX13.6 D.R.O. Installation LUX13.7 Quick Change Tool Holder (USA) LUX13.8 Import Quick Change Tool Holder LUX-MATTER PRECISION LATHES SERIES (Made in Taiwan): Precision Tool Room Lathes Geared Head LUX1340G 12 SPEED, D /16 BORE 3HP, 220V/3 PHASE LUX1440G 12 SPEED, D /16 BORE 3HP, 220V/3 PHASE LUX1640T 12SPEED, D1-6, 2 BORE, 5HP, 220V / 440V, 3PH, Taiwan LUX1660T 12SPEED, D1-6, 2 BORE, 5HP, 220V / 440V, 3PH, Taiwan Standard Equipment Includes: Steady Rest, Follow Rest, 3&4 Jaw Chucks, 4 Way Tool Post, Face Plate, Coolant System, Reducing Headstock Sleeve, Rapid Braking Center, One Piece Stand with Chip Tray, Rear Splash Guard, Gap Bed Threading Dial, Inch. Metric Gear Box (No Change Gears Required) Universal scroll chuck design End-surface clamping design enables fast effi cient mounting of several chucks to a worktable Super thin design allows greater Z-axis machining Elongated slots allows fast and easy positioning on worktable, simply use standard T-bolts, versus mounting connecting plates required by conventional chucks Milled key-slots on the base plate allows accurate quick changing of the chucks Ideal for pallet applications, Standard Mills, Vertical Machining Centers, Angle Plates, Tombstones, and Grinding Machines. American standard, hard top and master jaws Size Approx Gripping (inch) Weight External Internal Min. Max. Min. Max. MCA lbs MCA lbs MCA lbs MCA lbs A B C D E F G H J K L M N P Q R S MCA M mm* MCA M mm* MCA M mm* MCA M mm* Unit: Inch * Square Drive

61 Precision Gear Head Bench Lathe MADE IN CHINA (China) YCL1340GH Specification: YCL-1340GH Swing over bed 13 Distance between centers 40 Swing over cross side 8 Swing over gap 18 3/4 Width of gap 7 7/8 Length of bed 65 1/4 Width of bed 7 3/8 Hole through spindle 1 3/8 Tailstock spindle travel 3 3/4 Cross slide travel 6 7/8 Top Tool slide travel 3 3/4 Saddle travel 35 1/4 Taper of spindle taper f MT #5 D1-4 center Mores taper Tailstock taper of center MT#3 Range of spindle speeds 8 speeds 70~2000rpm Lead screw diameter 7/8 Feed rod diameter 3/4 Threads per inch of lead 40 TPI screw Thread can be cut TPI Main spindle motor 2HP/ 1.5 kw Net weight 1100LBS YCL1236GH 12 x36 9 Speeds 1 1/2HP, 110V/220V,1φ YCL1640 YCL x40 D x60 D1-6 Precision Medium Duty Live Centers Made of hardened steel and ground for high accuracy. Precision high quality bearings. Lathe bed is constructed of high tensile strength cast iron, rigid structure with hardened and ground ways Precision main spindle loaded on high quality precision bearings 8 speed headstock with 70 to 2000 rpm. Speed changes by head stock quick change lever action Permanently fi ltered oil headstock bath provided clean running oil for long life of bearings & gears 2HP motor Manufacture included heavy duty fl oor stands, along with full length splash guard as standard equipment Standard Accessories: Motor pully Center (M.T.No3) Change gear Open end wrench Oil gun Back plate for 3 jaw chuck for 6 Back plate for 4 jaw chuck for 8 4 way tool post. 3-jaw scroll chuck 160mm (6") Follow rest 4 jaw independent chuck 200mm (8") Face plate 300mm (11-3/4") Center sleeve (MT No.5) Tool box Steady rest Splash guard Floor stand Screw driver Allen wrench Full Size Chipguard 12 Speeds 7 1/2HP 2 5/16 BORE 12 Speeds 7 1/2HP 2 5/16 BORE Precision Gear Head Engine Lathe MADE IN CHINA Hardened and ground bed ways and spined shafts in headstock 16 speeds all geared headstock rpm 3HP 3-phase 220V motor Foot brake giving rapid braking and built in coolant system Emergency stop button equipped on the front of headstock Open type chip pan easily to remove chips Jog button for easy engagement and inching spindle Extra safety switch shuts down machine (China) entirely for changing belt or gear for threading cutting YCL1440GH Built in full size splash guard and lamp for worker s convenience Standard Accessories: Change gear 3-Jaw 6" chuck Chip pan 4-way tool post Follow rest D1-4 back plate Coolant system Reduction sleeve Dead center Work light 4 jaw chuck 8 Face plate 10 Steady rest Full length splash guard Chasing dial indicator Capacities: Swing over bed 14" Swing over carriage 9" Distance between centers 40" Swing over gap 20" Width of bed 8" Leadscrew Diameter of leadscrew 7/8" Pitch threads of leadscrew 8 TPI Power: Main motor 3HP Coolant pump 1/8HP Threading & Metric pitch threads mm (22 kinds) feeding: Whit-worth threads TPI (44 kinds) Range of longitudinal feeds " /rev Range of cross feeds " / rev Main spindle: Dia. of Spindle thru hole 1-1/2" Number of Spindle speeds 16 Taper of spindle M.T. #5 Spindle speed (16) rpm Spindle nose D1-4 Tailstock Travel of tailstock quill 5" Diameter of tailstock quill 2-3/4" Taper hole of tailstock quill MT3 Machine Overall dimensions 75.6"x29"x47" Dimension: App. weight 1980 LBS Heavy Duty Bull Nose Live Centers Used for pipe and other hollow-shaped work machining. Drawbar end. LATHE & ACCESSORIES Precision Live Centers Morse Taper Accuracy load Max. RPM Drawbar Thread LC NF LC /8-16 LC /2-13 LC /8-11 LC /4-16 Morse Dimension (Inch) Drawbar Taper a A B a OAL Threads LCB MT /8-16 LCB MT /2-13 LCB MT /8-11 Precision Live Centers Morse Dimension Load Rate Drawbar Taper a A B C OAL (lbs) Threads LCHB /8-16 LCHB /2-13 LCHB /8-11 LCHB /4-16

62 LATHE & ACCESSORIES Atlas Workholding Front Hand Wheel Quickie 5C Collet Chucks. Plain Back Chuck Specifications Item No. Desc. Collet Type Item No. Spindle Round Cap. PB23-D3 D PB23-D4 D PB23-D5 D PB23-D6 D PB23-D8 D PB23-D11 D Round Cap. A B C** D E F price Fast and easy, front hand wheel operation Reduces operator fatigue Quick Change over Chuck to Collet Chuck - No linkages or drawtubes For 5C collets One year warranty Accurate-Maximum cone TIR.0005" Available in D type (camlock), A type, L type (long tapered nose) threaded, Flat Back and 4º taper Hand wheel teeth nitrided for longer life Body nickel plated for corrosion resistance Threaded Mount Chuck Specifications PB Taper 1.06 PB C-PB 5C * PB / D Type Cam-Lock Chuck Specifications PB / A Type American Standard Chuck Specifications Item No. Spindle Round L Type American Standard Chuck Specifications Cap. PB23-A4 A PB23-A5 A PB23-A6 A PB23-A8 A PB23-A11 A Item No. Spindle Round Cap. PB / PB / PB / Item No. Spindle Round Cap. PB23-L00 L PB23-L0 L PB23-L1 L PB23-L2 L Atlas Workholding Air Powered Front Mount 5C Dead Length Collet No Chuck. Draw-tube or Air Feed Tubes Required: for Lathes,Rotary Tables and Grinders: Series ATL206-5C No Hydraulic System Required No Draw Tube or Air Feed Tubes Restricting Spindle Bore No Rear Cylinders and Cylinder Adapters Low Cost Easily Convert any Lathe or Grinder into a Production Machine Ideal for Rotary Table Applications Change from Collet Chuck to Standard Chuck Quick and Easy High Speed 5000 RPM High Accuracy Less Then.001 TIR Repeats on Duplicate Parts Plus Minus Dead Length Design Mount For Best Accuracy Use High Quality Crawford Collets Collet Chuck Order No. w/ Mount Lever or Foot Pedal Actuated Low Maintenance with Oil Mist Lubrication System ATL206-5C ST. RECESS High Resistance to Coolant and Chip Penetration Uses 5C Collets, Range 1/64 (.5mm) to 1-1/8 (27mm) Straight Recess Mount Type A Mount Available in A, D, L, 4 Degree, Threaded and Straight Recess Mounting ATL206-5CA4 A4 ATL206-5CA5 A5 ATL206-5CA6 A6 ATL206-5CA8 A8 Type D Mount ATL206-5CD3 D3 ATL206-5CD4 D4 ATL206-5CD5 D5 ATL206-5CD6 D6 ATL206-5CD8 D8 Collet Chuck ATL206-5C Specifi cations ATL206-5C A 168mm (6.61 ) B 130mm (5.12 ) C 26mm (1.02 ) D 5mm (0.20 ) E 100mm (3.94 ) F 55mm (2.17 ) G 106mm (4.17 ) H 147mm (5.79 ) Screw Hole Dia 9mm (0.35 ) x 4 Collet Type 5C Collets Max. RPM 5000 Sleeve Stroke 4mm (0.16 ) Air Pressure 3-8 kg/cm2( psi) Through Hole Dia 26mm (1.06 ) Chuck Weight 10kg (22lbs) Grip Force 10, PSI Other Mounts ATL206-5C43 2-1/4-8 ATL206-5C44 4 o taper ATL206-5C45 2-3/16-10 ATL206-5C46 2-3/8-6 Collet Chuck Supplied with: 2Filter Bars 2Air Hoses 1Fixing Bracket for Hoses 15C Collet Wrench 1Hex Key Mounting Bolts Users Manual

63 LATHE & ACCESSORIES B C 3-Jaw B C 4-Jaw B C Zero-set Mounting Plate Plain Back Lathe Independent Camlock -Type CD Center Dia. Spindle Chuck Plain Back Chuck Hole Nose With 2 Sets Solid Jaws 3-Jaw Plain Back Lathe Chuck With 2-Pc Reversible Jaw These BTC series has it s top & master jaws. The hard top jaws can perform as internal external jaws by turning them around T.I.R. repeatability & meet ASA specifi cations. Duplicate parts for chuck through 12 Center Hole Center Hole Dia. WT. Lbs. BT3063R BT3083R BT3103R BT3123R BT3153R BT3203R BT3253R B C 3-Jaw Chuck 2-Pc Reversible Jaws Cam Lock D1 Spindle Dia. WT. Lbs. BT BT BT BT BT BT B C Center Hole Dia. WT. Lbs BT6063D BT6063D BT6083D BT6083D BT6083D BT6103D BT6103D BT6103D BT6123D BT6153D BT6203D SK 3-Jaw Strong Scroll Chuck Plain Back, 2-Piece Jaws Chuck. Hardened & ground jaws; Cast iron body; Heat treated operating screws; One set mounting screws Center Hole Dia. WT (Lb.) BT BT BT BT BT BT BT B C 4-Jaw Independent Chuck Cam Lock Camlock direct mounting Solid jaws D1 SPINDLE Center Hole Dia. WT (Lb.) BT4084D BT4084D BT4104D BT4104D BT4124D BT4124D BT4164D BT4164D BT4204D B C Zero-Set Universal Chuck Precision zero set chucks with new lower prices with TIR repeatability on duplicate parts Semi steel body. Scroll and jaws hardened & ground for extra gripping force Comes with master jaws and top jaws Three jaw scroll chucks for conventional machining 3-Jaw Chuck Size OD min OD max Max rpm 1063R R R R R Jaw Chuck Size OD OD Max min max rpm 1066R R R R R CD D-3 CD D-4 CD D-5 CD D-6 CD D-8 CD /4 D-3 CD /4 D-4 CD /4 D-5 CD /4 D-6 CD /4 D-8 CD D-4 CD D-5 CD D-6 CD D-8 CD D-6 CD D-8 CD D-11 Threaded Mounting Plate Center Hole Dia. Spindle Nose TH ½-8 TH ¾-8 TH ¼-8 TH /8-6 TH /4 2¼-8 TH /4 2-3/8-6 TH ¼-8 TH /8-6 TH ¾-8 TH /8-6 TH ¾-8 Mounting Plate Mounting Chuck Size Spindle # Nose HK357-3 HS R 6-3JAW 4 taper HK357-6 HS R 6-6JAW 4 taper HK362-4 HS JAW 4 taper HK276-3 HS R 6-3JAW 2-3/16-10 HK276-6 HS R 6-6JAW 2-3/16-10 HK673-4 HS JAW 2-3/16-10 American Standard Flange Nose Center Hole Dia. Spindle Nose AS A-4 AS A-5 AS A-6 AS A-8 AS /4 A-5 AS /4 A-6 AS /4 A-8 AS A-6 AS A-8 AS A-6 AS A-8 Long Taper Key Drive Type L Thru-Hole Mont Max. Max. Gripping Range Dia Dia gripping force (N) speed (rpm) O.D. range I.D. range SK D φ0.31 φ6.30 φ2.17 φ5.91 SK D φ0.31 φ7.09 φ2.44 φ6.69 SK D φ0.47 φ10.24 φ3.15 φ9.84 SK D φ0.59 φ11.81 φ3.54 φ11.42 SK D1-8/D φ0.98 φ12.60 φ4.33 φ12.20 SK D1-8/D φ1.18 φ15.75 φ4.33 φ14.96 Center Hole Dia. Spindle Nose LT L-00 LT L-0 LT /4 L-00 LT /4 L-0 LT /4 L-1 LT L-00 LT L-0 LT L-1 LT L-0 LT L-1

64 LATHE & ACCESSORIES GROMAX 3-Jaw Wedge Type Through-Hole Power Chuck without Adaptor Big Bore Power Chucks for CNC Lathes compatible with KITAGAWA Big Bore Power Chuck Larger thru hole 20% higher speed, gripping force and thru-hole than usual chucks. Assembled with adopter for ASA B5.9 type A spindle. All sliding surface are hardened and ground for accurate running and long service repeatability. Standard Equipment: Chuck assembled with adaptor, hard jaws, soft jaws, t-nuts, draw nut & wrench, mounting bolts and 2-Jaw, 3-Jaw, 4-Jaw available Matching Cylinder Parts Chuck Dia Thru-Hole Dia Mont Max. gripping force (N) Max. speed (rpm) GTN205A A GTN205A A GTN206A A GTN206A A GTN208A A GTN208A A GTN210A A GTN210A A GTN212A A GTN212A A GTN215A A GTN215A A GROMAX Super High Speed Through-Hole Rotary Hydraulic Cylinder Compatible with KITAGAWA Big Bore Cylinders Small-sized light weight: comparing with the traditional product, it is small-sized (reduced to MAX 3.75 ) and a light weight (weighted MAX 9.9 lbs.). Make its capacity more suitable to reduce the burden of the machinery at high speed turning. The most largest bore: Comparing with the old product, it has about 20% more bore full diameter for utilizing the capacity of machinery. The safety mechanism: It can retain the gripping force with a check valve. N204 /N205 Replace Matching Kitagawa Chuck # Thru Hole Dia Max. Draw Tube Pull Force Max. Operating Pressure Max. rpm GTM1036 S1036 N Lbs. 570 PSI 8000 GTM1246 S1246 N Lbs. 570 PSI 7000 GTM1552 S1552 N Lbs. 570 PSI 6200 GTM1875 S1875 N Lbs. 570 PSI 4700 GTM2091 S2091 N Lbs. 570 PSI 3800 GTM2511 S2511 N Lbs. 570 PSI 2800 N206 N208 N210 N212 N215 N218 N224 Wedge N205-1 N206-1 N208-1 N210-1 N212-1 N215-1 N218-1 N224-1 Plunger Blank Draw Nut N205-2 N206-2 N208-2 N210-2 N212-2 N215-2 N218-2 N224-2 Master Jaws N205-3 N206-3 N208-3 N210-3 N212-3 N215-3 N218-3 N224-3 (set 3) Hard Jaws N205-4 N206-4 N208-4 N210-4 N212-4 N215-4 N218-4 N224-4 (set 3) Soft Jaws N205-5 N206-5 N208-5 N210-5 N212-5 N215-5 N218-5 N224-5 (set 3) T-Nuts N205-6 N206-6 N208-6 N210-6 N212-6 N215-6 N218-6 N224-6 (set 3) Plunger Nut N205-7 N206-7 N208-7 N210-7 N212-7 N215-7 N218-7 N224-7 Chip Cover N205-8 N206-8 N208-8 N210-8 N212-8 N215-8 N218-8 N224-8 Chuck N205-9 N206-9 N208-9 N210-9 N212-9 N215-9 N218-9 N224-9 Wrench Chuck N205-A N206-A N208-A N210-A N212-A N215-A N218-A N224-A Adapter Actuator N205-AA N206-AA N208-AA N210-AA N212-AA N215-AA N218-AA N224-AA Adapter Draw Tube N205-DT N206-DT N208-DT N210-DT N212-DT N215-DT N218-DT N224-DT GROMAX 4-Jaw Wedge Type Through-Hole Power Chuck with Adaptor Chuck. Dia Thru-Hole Dia Mont NIT208A A2-5 NIT208A A2-6 NIT210A A2-6 NIT210A A2-8 NIT212A A2-6 NIT212A A2-8 NIT215A A2-8 NIT215A A2-11 Parts List NIT200A Series: NIT208 NIT210 NIT212 NIT215 Wedge Plunger NIT208-1 NIT210-1 NIT212-1 NIT215-1 Draw Nut NIT208-2 NIT210-2 NIT212-2 NIT215-2 Master Jaws (set 4) NIT208-3 NIT210-3 NIT212-3 NIT215-3 Hard Jaws (set 4) NIT208-4 NIT210-4 NIT212-4 NIT215-4 Soft Jaws (set 4) NIT208-5 NIT210-5 NIT212-5 NIT215-5 T-Nuts (set 4) NIT208-6 NIT210-6 NIT212-6 NIT215-6 Plunger Nut NIT208-7 NIT210-7 NIT212-7 NIT215-7 Chip Cover NIT208-8 NIT210-8 NIT212-8 NIT215-8 Chuck Wrench NIT208-9 NIT210-9 NIT212-9 NIT215-9 Chuck Adaptor NIT208-A NIT210-A NIT212-A NIT215-A Actuator Adapter NIT208-AA NIT210-AA NIT212-AA NIT215-AA Draw Tube NIT208-DT Gromax Vertical/Horizontal and Vertical Stationary Power Chuck HYDRAULIC DOV POWER UNIT: These power units are compact and equipped with manually or electrically operated controls depending on the application. NIT210-DT NIT212-DT NIT215-DT DON Hydraulic Power Unit: 10 Gallon Tank, 2 HP 220/440V 3 phases Motor with Vane Pump, 5 GPM at 1800 rpm. Directional Solenoid Valve 110V AC, Pressure Reducing Valve, Check Valve, Circuit Block, Pressure Gauge, Fluid Radiator, Filter, Hydraulic Hoses, Pedal Switch. Description Max. Draw Bar Pull Force (LBS) Max. Operating Pressure (PSI) DOV-6-6S with 3-jaw 6 solid chuck DOV-8-8S with 3-jaw 8 solid chuck DOV-8-10S with 3-jaw 10 solid chuck DOV-8-12S with 3-jaw 12 solid chuck DOV-8-8T with 3-jaw 8 thru-hole chuck

65 ALORIS Quick Change Tooling System Wedge Type Super Precision Tool Post Precision Engineered to assure repetitive accuracy. Quickly and easily installed. ~12 Lathe Swing AxA Series Lathe Swing BxA Series Lathe Swing CxA Series Lathe Swing CA Series Lathe Swing DA Series ARS-AXA ARS-BXA ARS-CXA ARS-CA ARS-DA LATHE & ACCESSORIES Turning and Facing Holder #1 Take various sizes of bits. Tool Bit 3/16 ~ 1/2 ARS-AXA.1 1/4-5/8 ARS-BXA.1 1/2-3/4 ARS-CXA.1 1/2-1 ARS-CA.1 1/2 ~1 1/4 ARS-DA.1 Boring, Turning and Facing Tool Bit Holder #2 V-groove holds round shank boring bar and tools as well as square tool bits Heavy Duty Boring Bar Holder #4 Equipped with a split busing to accommodate a boring bar with small diameter Tool Bit 1/2x7/16 ARS-AXA.2 5/8 ARS-AXA.4 5/8x1/2 ARS-BXA.2 3/4 ARS-BXA.4 3/4 x3/4 ARS-CXA.2 3/4 \ ARS-CXA.4 1x13/16 ARS-CA.2 1 ARS-CA.4 1 1/4x1 ARS-DA.2 1 1/4 ARS-DA.4 Multiple Toolholder #6 Versatile, ideal for repetitive work; for gang setups or form tool Tool Bit 1/4-1/2 ARS-AXA.6 1/4-1/2 ARS-BXA.6 3/8-5/8 ARS-CXA.6 1/2-3/4 ARS-CA.6 1/2-1 ARS-DA.6 Universal Parting Blade Holder #7 For bevel as well as T-type blades. Tool Bit 1/2 ARS-AXA.7 11/16 ARS-BXA.7 3/4 ARS-CXA.7 7/8 ARS-CA.7 1 1/8 ARS-DA.7 Threading Holder #8 Tool Bit This universal threading holder comes with an interchange- able high speed threading blade (2 cutting edges) Combination Turning and Facing Holder for Carbide Triangular Inserts #16N Right and left hand turning and facing Tool Bit na ARS-AXA.8 na ARS-AXA.16N na ARS-BXA.8 na ARS-BXA. 16N na ARS-CXA.8 na ARS-CXA. 16N na ARS-CA.8 na ARS-CA. 16N Na ARS-DA.8 na ARS-DA. 16N Morse Taper Holder #5 Drill with carriage by using power feed instead of tailstock. Knurling, Facing and TUrning Holder #10 For turning and facing as well as knurling. Tool Bit Tool Bit 2MT ARS-AXA.5 3/16-1/2 ARS-AXA.10 2MT ARS-BXA.5 1/4-5/8 ARS-BXA.10 3MT ARS-CXA.5 1/2-3/4 ARS-CXA.10 3MT ARS-CA.5 1/2-1 ARS-CA.10 4MT ARS-DA.5 1/2-1 1/4 ARS-DA.10 Extension Toolholder #13 Provides an extremely rugged extended open slot featuring max. rigidity for deep turning or facing operation. Tool Bit Adjustable Knurling Holder Tool Bit #19 This tool is adjustable, providing the ideal near vertical axis approach angle for wide range of stock diameter. Dovetail Chuck Holder #35 Permits quick and accurate mounting of drills, reamers, taps, boring bars, etc. and feed by lathe s carriage power drive. Tool Bit 3/16-1/2 ARS-AXA.13 3/4X1/4X3/8 ARS-AXA /2 CH ARS-AXA.35 1/4-5/8 ARS-BXA.13 3/4X1/4X3/8 ARS-BXA /2 CH ARS-BXA.35 1/2-3/4 ARS-CXA.13 3/4X1/4X3/8 ARS-CXA /2 CH ARS-CXA.35 1/2-1 ARS-CA.13 3/4X1/4X3/8 ARS-CA.19 3/16-1/4 CH ARS-CA.35 1/2-1 1/4 ARS-DA.13 3/4X1/4X3/8 ARS-DA.19 3/16-1/4 CH ARS-DA.35

66 MACHINE TOOL. SHOP SUPPLY Double Column Type Fully Automatic Bandsaw Please visit our website at for more models. H-260HB Shown Specifi cations: H-260HA H-260HB 260mm (10.24 ) 310Hx260mm (12 x10.24 ) (WxH) Bundle Width 145 to 230mm (5.7 x9.05 ) Cutting Height mm (1.57 x5.12 ) Blade Speed 20 to 80 m/min 20~80 m/min 65.8 to fpm 65.8 to fpm (variable speed pulley) (inverter ) Vise Clamping (Hydraulic) Rack and Pawl Full Stroke Blade Tension Manual Hydraulic Blade Size (LxWxT) 3820x27x0.9mm 3920x34x1.1mm (150 x1.07 x0.035 ) (154 x1.34 x0.04 ) Motors Blade Drive 3 HP 5 HP Hydraulic Pump 1 HP Coolant Pump 1/8 HP Chip Motor 40 W Shuttle bar Single Feed 400mm (15.75 ) feed Multiple Feed 400mm (15.75 ) x9 times Floor space 2170x2100mm (85.4 x ) List POR POR Pivot Type Fully Automatic Bandsaw S-300HA shown Please visit our website at for more models. Horizontal Bandsaw Specifi cations: S-300HA S-300HB S-400HA 300mm(12 ) 400mm(16 ) 250x300mm(10 hx12 w) 330x410mm(13 hx16 w) Bundle Cutting Width 145 to 230mm(6 to 9 ) 195 to 300mm(8 to 12 ) Height 40 to 150mm(1 1/2 to 6 ) 90 to 200mm(3 1/2 to 8 ) Blade Speed 50Hz 17 to 68 m/min 18 to 72 m/min 20 to 80 m/min (55 to 225fpm) (58 to 230fpm) (65 to 260fpm) option 17 to 100 m/min option 18 to 110 m/min option 20 to 120 m/min (55 to 330fpm) (58 to 350fpm) (65 to 390fpm) 60Hz 20 to 80 m/min 22 to 88 m/min 24 to 96 m/min (65 to 260fpm) (70 to 280fpm) (80 to 315fpm) Motors Blade drive 2.2kw(3 HP) 3.7kw(5 HP) 3.7kw(5 HP) Hydraulic pump 0.75kw(1 HP) 0.75kw(1 HP) 1.5kw(2 HP) Coolant pump 0.1kw(1/8 HP) 0.1kw(1/8 HP) 0.2w(1/4 HP) Blade Size 3820x25x0.9mm 3820x32x1.1mm 4570x32x1.1mm (150 x1 x0.035 ) (150 x1 1/4 x0.042 ) (180 x1 1/4 x0.042 ) Blade Tension Hydraulic Shuttle Bar Feed Single feed 400mm(16 ) 500mm(20 ) Multiple feed 400mm(16 )x9 500mm(20 )x9 Machine Weight 1650kg(3630 lb) 1700kg(3740 lb) 2300kg(5060 lb) Floor Space 1800x2160mm(71 x85 ) 2100x2500mm(82 x99 ) List POR POR POR Horizontal Bandsaw Metal Cutting Bandsaw RF-1018B SHOWN RF-712N RF-712DR RF-916H 9 x 16 capacity, 1 HP, 4 cutting speeds 3- phase and single-phase motor both available, 1 blade, with coolant system and hydraulic feed WT RF-1018B (step pulley) 900Lbs RF-1018V (variable speed) RF-1018NDR (variable speed) : BS300SA : Round: 12 Rect.: 10 x20 BS300SA 3HP, RPM, 1 PH, Motor Built-in coolant system; Hydraulic downfeed; Quick positioning vise; Heavy cast iron machine table; 4 cutting speeds RF-712N 7 x 12 capacity, 3/4 HP, 1 PH, Motor, 3/4 blade RF-712DR/ 2WAY SWIVEL HEAD 7 x 12 capacity, 3/4 HP, 1 PH, Motor, 3/4 blade

67 GROMAX Universal Tool & Cutter Grinder GT-610 Standard Accessories: Air bearing fi xture Cup wheel Open end wrench Forward/ reverse switch Offset wrench Hex wrenches (2) Large, easy to read dials Smooth movement due to steel balls on the longitudinal travel bed Air bearing fi xture works on steady rest Air quill make of heat-treated alloys, chromium plating, ground and tapped High grade castings and aluminum alloys throughout Forward and reverse switch Use worm and worm gear to adjust angle and turn around the wheel head Proper distance of longitudinal travel is controlled by limit switch Backlash adjustment exist in the leader screw and nut of crossfeed Distance between centers 10 Swing over table 8 Longitudinal travel of table 10 Cross travel of saddle 6-5/16 Work table 5-1/4 x 18-1/2 Vertical adjustment of wheel head 7-1/2 Swivel adjustment of table 0 Swivel adjustment of column 360 Vertical tilting range of wheel head 360 Diameter of wheel 1-1/4 I.D. Saucer wheel: 6 Flaring wheel: 5 Speed of wheel 50Hz, 2850rpm 60Hz, 3450rpm Motor 1/3 Hp,1φ,110/220V Weight 275 Lbs GROMAX Vertical Metal Cutting Bandsaw GROMAX Universal Cutter Grinder This unit is designed for single-lip cutter. It can also be used to grind engraving cutter to various shape & angle. GTU2 (2-way) NA GTU2/GTU Standard Accessories: Collets 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8"; Cup Wheel 4"x2"x3/4" Extra Jointless Belt; Tools; User's Operation Guide GTU2/GTU Cup Wheel Diameter/Thickness/Bore 4" x 2" x 3/4" Fine Longitudinal Adjustment Travel Of Index Head Carrier 3/4 Longitudinal Travel Of Index Head Carrier 5"~1/2" Spindle Speed 5200 RPM Collet 1/8"~5/8" GTU2/GTU Optional Accessories: Taper Angle 0 o ~180 o Negative Taper Angle 0 o -52 o Relief Angle 0 o -44 o Motor 1/4 HP / 3400rpm Voltage 110v / Single Phase Weight 125 Lbs Overall Dimension 18" x 14" x 14" MACHINE TOOL. SHOP SUPPLY Extra cup wheel Diamond wheel cup Diamond dresser Extra wheel fl ange Extra collet GTU.0 GTU.1 GTU.2 GTU.3 GTU.4 (compatible with deckel type grinder) GU2 Standard Accessories: Diamond Wheel Dresser Collets φ4/6/8/10/12mm (or inch) Wrench & Spanner Set Grinding Wheel Wheel Mount Aligning Finger Lock Pin Drive Belt Standard GB-36 / GB-45 Variable Speed GV-50 / GV-100 GU2 GU2.1 Lathe Tool Attachment Optional Accessories: Standard Accessories: Rip fence for straight, repeated Blade shear, grinder cuttings, easily removable for varied size Saw blade butt welder with annealing unit built in Miter protractor for angular cutting Built-in blade & tire cleaning brush Low voltage working lamp One set of required tools One instruction & parts manual GB-36 GB-45 GV-50 GV-100 Throat / /8 Max. work height 9-1/ / / /16 Table size 19.5x x x x x19.5 Table inclination 4 ways 15 Saw blade length / / /8 Saw blade width 1/8 ~5/8 Saw blade speeds Low 65~295 85~375 65~265 65~265 High 400~ ~1600 Butt welder capacity 2.4 KVA,1/8 ~5/8 Drive motor (HP) Net Wt. (LBS) w/table auto feed NA NA GV-50A GV-100A 1 GU2 Max. Collet φ5/8 Max. Grinding Dia. φ1 Taper Angle 0 ~180 Relief Angle 0 ~45 Negative Angle 0 ~25 Grinding Spindle 6000rpm Cup Grinding Wheel 4 x2 x20mm Motor 1/3HP 220V 50/60Hz Net/Gross Weight 99/132 Lbs. Machine Dimensions 17.7 x16 x14 Packing Dimensions 21.6 x17.7 x18 Samples of Cutter Porfiles GU2.3 Twist Drill Attachment GU2 Optional Accessories: Lathe Tool Attachment GU2.1 End Mill Attachment GU2.2 Twist Drill Attachment GU2.3

68 MACHINE TOOL. SHOP SUPPLY GROMAX Universal Drill Grinder Double Cams: It can grind the drills from one fl ute to six fl utes. UDG60.GW Cup Grinding Wheel UDG100.GW Cup Grinding Wheel UDG -100 Shown Rugged construction and precision components assure accuracy. The six jaw chuck accurately centers the drill which ensures that the cutting lips are ground equally in both length and angle to produce drill, NC drill, step drill, taps, endmill,counter sink, round bars, etc. Grinding wheel and "dish" grinding wheel are both on spindle to save time. Grinding capacity: UDG-60: φ0.07 ~φ2.36 (straight & taper shank) UDG-100: φ0.20 ~φ3.94 (straight & taper shank) With 6 precision jaw chuck, it can grind the table of the drills and the paring of the drills abdomen. The main spindle has 2 grinding wheels. It can grind the blade and the center of the drills at the same time. This can save time with out hanging the grinding wheel. The motor can travel 6.30 up and down. This can increase the control of the machining. Testimonial: The Gromax Universal Drill Grinder - UDG-100 has been a great asset to our company. We have ground step drills, taper and straight shank drills, counter sinks and more with excellent accuracy. We have successfully ground up to 3 3/4 diameter tools. The 8 jaw chuck hold tools very accurately. This machine has been very versatile and has been well worth the money invested. UDG-60 UDG-100 Standard Accessories: One 6-jaw self-centering chuck One grinding wheel (recessed one side) One "dish" grinding wheel for point thinning Grinding wheel fl ange and balancing weights No 1,2,3,4 Morse taper sleeves. A.C. motor for grinding wheels Tools for general use Service/ instruction manual Radial relief attachment. Relieves radius of pilot to produce lands. Also for sharpening end mills Work light (12 Volts) Wheel balancer & arbor UDG-60 Shown Extra grinding wheel fl ange for cup wheel Cup grinding wheel Cam for left hand drills Cam for spiral point drills Cam for sheet metal point drills Cam for 1 fl ute grinding Cam for 3 fl ute grinding Cam No.4 for point angle ( ) Cam for 5 fl ute grinding Cam for 6 fl ute grinding Cam No.6 for step drill Cam No.8 for 4 fl ute taps or reamers UDG-60 UDG-100 Drill size 0.08 ~ 2-3/8 0.2 ~ 3-15/16 Table Travel (XxY) 7.09 x x 6.3 Vertical adjustment of wheel head Point angles Clearance angle Motor 1 HP 220V/ 3 Phases Grinding wheels O.D.xWxI.D. 7 x 1 / 4 x 1 / 4 7 x 3/4 x 1 / 4 Speed of rotation 3600 rpm 3600 rpm Net weight 616 LB 750 LB Packing Dimension 37.4 x 39.4 x 58.3 GROMAX Precision Drill Sharpener Typical Sharpening Application: Ideal for sharpening general drill bits, step drill bits, taps, chamfering tools, end mills, ect. Point Angle Grinding Range Grinding Wheel Speed Motor Weight Packing Dimension 40 ~ ~1.26 (MT2 or MT3) 4200 rpm 1/3 HP 121 lbs X 29.5 X 33.5 Enclosed floor stand (optional) PDS32 PDS32M (motorized) Optional Accessories: PDS32.1 Enclosed fl oor stand PDS32.2 #1 cam for single fl ute chamfering tool PDS32.3 #3 cam for 3-fl ute chamfering tool & tap PDS32.4 #4 cam for 4-fl ute chamfering tool & tap PDS32.5 CBN grinding wheel PDS32.6 Diamond grinding wheel

69 GROMAX Universal Tool & Cutter Grinder GT-357L GT-357L Shown Specifi cation MACHINE TOOL. SHOP SUPPLY GT-357L Max. distance from colum to outside of straight wheel; dove tail slide 4 5/8 (117mm) not extended, spindle 90o to table Max. distance from colum to outside of straight wheel; dove tail slide 11 9/16 (294mm) extended, spindle 90o to table Grinding wheel hole size 1 1/4 Distance between Tailstocks 22 Distance between centers in workhead and tailstock 15 Distance between collet in workhead and tailstock 15 1/2 Distance between chuck face and tailstock (1 hole through chuck) 14 Table working surface 5 1/4 x 27 1/4 Sub Table 8 x38 Total crossfeed movement 7 3/4 Feed per revolution of handweel Feed per graduation of handweel Table traverse 14 Fast feed per revolution of handwheel 3 1/8 Slow feed per revolution of handwheel 5/8 Ratio-Fast: Slow 5:01 Vertical Movement of Column 7 Feed per ravolution of handwheel 0.05 Feed per graduation of handwheel Column diameter 4 Min. distance centerline of wheel shaft to top of table 3 3/4 Max. distance centerline of wheel shaft to top of table 10 3/4 Centerline height of fi xtures to top of table Table T-slot 7/16 Table swivels (calibration: 3 per ft., 15oeither side of center 240 o Wheel head swivel 360 o Motor speed rpm 60HZ: HZ:2850 Spindle speed range (High speed Grinders) 60HZ:3450~ HZ: Spindle speed range (Heavy duty Grinders) 60HZ:1150~ HZ:1185~7695 Net weight 1140 lbs Gross weight 1400lbs Packing Dimension 43 x43 x63 OD Grinding This machine with C21S2 heavy duty spindle fi xture is suitable for heavy duty cutter sharpening and continuous cylindrical grinding. Picture above shows the 357L with special accessory C2DH-1 motor driven workhead, making it more niversal for OD grinding. Heavy Duty C21S2 1/2 HP motor handy adaptors with the heavy duty spindle fi xture are special for heavy duty cutter sharpening. Belt Code: 5M560 5M615 5M670 5M710

70 MACHINE TOOL. SHOP SUPPLY SONY Mill 2-Axis/3-Axis Package Magnescale Inch / metric conversion; Absolute / Incremental; Datom point memory; Linear error comp.; Error Check / Fault Alarm; Hole; Zero reset; Preset capability; Recall; Data backup; Self-Diagnostics; Midpoint calculation; electable Resolutions (0.001, , ) Digital Readout System Adaptable Readout for up to Three Axes ND780 Series Display Counter: General purposes Primarily for milling machines ND522 Series Display Counter: General purposes Primarily for milling machines Digimatic DRO System New! KA Counter & AT-715 Magnetic Scales DRO Packages For Bridgeport & Bridgeport Type Vertical Milling Machines Accu-Rite Micro Line Millman SONY Magnescale SG10 Grinder Package SONY Lathe Package C80 DIGITAL READOUT NEWALL TOPAZ/ DP8 series C80 Mill Packages:- 2-Axis Based on the principle of electromagnetic, Newall s Spherosyn, Microsyn scales consist of a tube, constructed of stainless steel or carbon fi ber weave, fi lled with a column of individually graded steel balls. The balls are set under a pre-load at the factory. The tube is then sealed. The Reader Head consists of six copper coil assemblies wound around a fi ber composite bobbin. The coil assemblies and required electronic circuitry are potted with an epoxy resin. This completely seals the electronics from coolant, oil and other shop contaminants. New! A50,C70,C80,E70-M,E70-L Displays Parts No. Pkg. Description: Note: C802000/1 C80 Mill Package, 12 x24 Travel C802000/2 C80 Mill Package, 12 x30 Travel C802000/3 C80 Mill Package, 12 x36 Travel C802000/4 C80 Mill Package, 16 x30 Travel C802000/5 C80 Mill Package, 16 x36 Travel C802000/6 C80 Mill Package, 16 x40 Travel C80 Mill Packages:- 3-Axis Parts No. Pkg. Description: C803000/1Q06 C803000/1K16 C803000/2Q06 C803000/2K16 C803000/3Q06 C803000/3K16 C803000/4Q06 C803000/4K16 C803000/5Q06 C803000/5K18 C803000/6Q06 C803000/6K18 C80 Lathe Packages:- 2-Axis C80 Mill Package, 12x24x6 Travel C80 Mill Package, 12x24x16 Travel C80 Mill Package, 12x30x6 Travel C80 Mill Package, 12x30x16 Travel C80 Mill Package, 12x36x6 Travel C80 Mill Package, 12x36x16 Travel C80 Mill Package, 16x30x6 Travel C80 Mill Package, 16x30x16 Travel C80 Mill Package, 16x36x6 Travel C80 Mill Package, 16x36x18 Travel C80 Mill Package, 16x40x6 Travel C80 Mill Package, 16x40x18 Travel Scale Length = Travel size+10 C70 Package 1, Parts No. C8006M10040SH11 Pkg. Description: C80 Lathe Package, 6 x40 Travel Note: Microsyn scale s C8008M10040SH11 C80 Lathe Package, 8 x40 Travel C8010M10040SH11 C80 Lathe Package, 10 x40 Travel C8006M10050SH11 C8008M10050SH11 C8010M10050SH11 C8006M10060SH11 C8008M10060SH11 C8010M10060SH11 C8008M10072SH11 C8010M10072SH11 C8012S00072SH11 C8008M10080SH11 C8010M10080SH11 C8012S00080SH11 C8010M10100SH11 C8012M10100SH11 C8014S00100SH11 C8012S00120SH11 C8014S00120SH11 C8016S00120SH11 C8020S00120SH11 C80 Lathe Package, 6 x50 Travel C80 Lathe Package, 8 x50 Travel C80 Lathe Package, 10 x50 Travel C80 Lathe Package, 6 x60 Travel C80 Lathe Package, 8 x60 Travel C80 Lathe Package, 10 x60 Travel C80 Lathe Package, 8 x72 Travel C80 Lathe Package, 10 x72 Travel C80 Lathe Package, 12 x72 Travel C80 Lathe Package, 8 x80 Travel C80 Lathe Package, 10 x80 Travel C80 Lathe Package, 12 x80 Travel C80 Lathe Package, 10 x100 Travel C80 Lathe Package, 12 x100 Travel C80 Lathe Package, 14 x100 Travel C80 Lathe Package, 12 x120 Travel C80 Lathe Package, 14 x120 Travel C80 Lathe Package, 16 x120 Travel C80 Lathe Package. 20 x120 Travel overall length=travel size+7 Spherosyn scale s overall length= Travel size+ 10

71 Hoist and Lifting Ring Side Load Hoist Ring Designed for side-mounted applications Ideal for stamping and injection mold industries Rated loads from 650 lbs. to 29,000 lbs. Material: 4140 certifi ed aircraft quality Standard Side Load Hoist Ring Rated Thread Load/lb Size Street Plate Lifting Ring Used for tightening and loosening with hammer or steel bar Finish: phosphate per DOD-P-16232F Safety factor: 5:1 Street Plate Lifting Ring Rated A B C D E F Thread (Unit: inch) Thread Torque Size Ft/lb Load/lb Type , /16 4-3/ /64 Coil , /16 4-3/ /64 Coil , /16 4-3/ /64 Acme , /16 4-3/ /64 Acme , / /4 Coil , / /4 Coil , / /4 Acme , / /4 Acme Street Plate Nut A B C D E F Torque ft/lb (Unit: inch) Wt. (lb) / /2 1-7/16 3/8 5/8 1-15/ / /2 1-7/16 3/8 3/4 1-15/ ,800 1/ /8 2-1/4 5/ ,500 5/ /8 2-1/4 5/8 1-1/ ,000 3/ /4 3-3/ /2 4-1/ ,500 7/ /4 3-3/ / , /4 3-3/ / , / /8 4-5/8 1-3/ / , / /8 4-5/8 1-3/8 2-1/2 6-1/ , / x /8 6-5/8 1-1/2 3-1/8 11-1/ Metric Side Load Hoist Ring Rated Load/ kgsize Thread A B C D (mm) Finish: Black oxide per mil spec. Safety facotr: 5:1 Magnetic Particle Inspected Certifi ed Heat Treatment E 360 swivel / 180 pivot F ft/lb Torque (lb) M8x /2 1-7/16 3/ / M10x /2 1-7/16 3/ / M10x /8 2-1/4 5/ ,400 M16x /8 2-1/4 5/ ,290 M20x /4 3-3/ / ,050 M24x /4 3-3/ / ,850 M30x /8 4-5/8 1-3/ / Welding rod-alloy # swivel / 180 pivot (Unit: inch) Wt. Round Base Swivel & Pivot Hoist Ring Direct mounting Wide round base helps distribute shear loads Rated load capacities from 2,500 to 20,000 Lbs. Perfect for pre-cast concrete products Round Base Swivel & Pivot Hoist Ring Rated A B C D H F I Thread Load/lb Size , /4 1-7/64 3/ /4 1/2 1/ , /4 1-7/64 3/ /4 5/8 5/ , /4 1-7/64 3/ /4 3/4 3/ , /16 1-1/ /64 3/4 3/ , /16 1-1/ /64 7/8 7/ , /16 1-1/ /64 1 1/ , /8 1-1/ /4 1-1/4 1 1/ , / / /64 1-1/2 1 1/ Hoist Ring Kit 360 swivel / 180 pivot Hoist Ring Kits enable you to custom assemble just the right swivel hoist ring for the job. Kits come complete with U-Bar (body and sub-assembly), screws, bushings, washers and E-rings enough to confi gure over 24 different hoist ring sizes and capacities. A handy accessory kit for lifting and moving heavy loads, and a must for your tool crib! Hoist Ring Kit (includes 4 of each item) Sub. Assembly Rated Load/lb Screw Screw Size Thread Length (Unit: inch) Torque Ft/lb Bushing Washer E-Ring /4-20X1-1/4 1/ /8 U-Bar /16-18X1-1/4 1/ , /8-16X1-1/4 1/ , /16-18X /2 U-Bar 2, /2-13X /4 U-Bar 4, /8-11X2-1/ , /4-10X2-1/ , /2-13X2-1/ /4 U-Bar 4, /8-11X2-1/ , /4-10X2-1/ U-Bar 7, /4-10X3-1/4 1-1/ , /8-9X2-3/ , X3 1-1/ (Metric) ,050kg M12X1.75X50 19mm /4 U-Bar 1,900kg M16X2.00X60 29mm ,150kg M20X2.50X65 34mm U-Bar MACHINE TOOL. SHOP SUPPLY 3,000kg M20X2.50X75 32mm ,200kg M24X3.00X80 37mm ,200kg M30X3.50X100 38mm KANETEC Lifting Magnet List LPR-V150 LPR-V300 LPR-600 LPR-V1200 Street Plate Nut (Unit: inch) Thread Type Thread Size/A B C D E UNC 3/ /8 1 1/ UNC /8 1 1/ UNC 1 1/ /8 1 1/ Coil 1 1/ /8 1 1/ Acme 1 1/ /8 1 1/ UNC 1 1/ /2 2-3/8 1-1/2 3/ Acme 1 1/ /2 2-3/8 1-1/2 3/ UNC 2-4 1/2 3-1/2 2-3/8 1-1/2 3/8 Max.lifting capacity[kg] Dimensions[mm] [kg] Steel plate Round steel W V L H G D E F Mass LPR-V150A LPR-V300A LPR-V600A LPR-V1200A *The lifting capacity is indicated by one third (safety factor 3)of the maximum holding power.

72 MACHINE TOOL. SHOP SUPPLY Safety Hoist Ring Metric Safety Hoist Ring Rated Load/kg Hoist and Lifting Ring Material: AISI4140 aircraft quality Finish: Black oxide per mil spec 360 swivel / 180 pivot cadmium plated Safety factor: 5:1 100% magnetic particle inspected Certifi ed heat treatment Rated load from 400 Lbs. to 125 tons Standard Safety Hoist Ring (Unit: inch) *LONG BAR Rated Thread A C D E B F Torque WT PRICE Load/lb Size Ft/# (lb) / / / / / / ,000 3/ / ,000 7/ / ,500 1/ / ,000 7/ / * ,000 7/ / ,500 1/ / * ,500 1/ / ,500 1/ / * ,500 1/ / ,500 1/ / * ,500 1/ / ,000 5/ / ,000 5/ / * ,000 5/ / ,000 5/ / * ,000 5/ / ,000 3/ / * ,000 3/ / ,000 3/ / * ,000 3/ / ,000 3/ * ,000 3/ ,000 3/ * ,000 3/ ,000 7/ * ,000 7/ , * , , * , , * , , / / , / / , / / , / / , / / , / / , / , / / , Thread Size A C D E B F Torque Kgm (Unit: mm) *LONG BAR Wt. (kg) M8x M10x ,050 M12x * ,050 M12x ,900 M16x * ,900 M16x ,150 M20x * ,150 M20x ,000 M20x * ,000 M20x ,200 M24x * ,200 M24x * ,200 M30x ,000 M30x ,000 M30x ,000 M36x ,500 M42x ,500 M48x ,300 M64x ,500 M72x ,000 M90x Stainless Steel Safety Hoist Ring Actek swivel hoist rings are designed for lifting. They rotate and pivot to absorb any pitch, roll or sway of unbalanced loads. Will not yield to heavy side loads. Help prevent the lifting hook from disengaging Safety engineered. All loads lifted are especially important from safety standpoint. Actek swivel hoist rings provide the kind of safety that protects men and material against accidents before they occur. For use in outdoor weather and certain chemical and corrosive environments Material: 300 series stainless steel Safety factor: 5:1 Liquid penetrant Mil 6868 Stainless Steel Safety Hoist Ring Rated Thread A C D E B F Torque Load/lb Size Ft/# 360 swivel 180 pivot (Unit: inch) *LONG BAR Wt. (lb) / / / / / / ,250 1/ / ,250 1/ / * ,250 1/ / ,250 1/ / * ,250 1/ / ,250 1/ / * ,250 1/ / ,000 5/ / ,000 5/ / * ,000 5/ / ,000 5/ / * ,000 5/ / ,500 3/ / * ,500 3/ / ,500 3/ / * ,500 3/ / ,500 3/ * ,500 3/ ,500 3/ * ,500 3/ ,000 7/ * ,000 7/ , * , , * , , * , , / / , / / , / / , / / , / / , / , / / Stainless Steel Metric Safety Hoist Ring Rated Load/ kg Thread Size A C D E B F Torque Kgm (Unit: mm) *LONG BAR Wt. (kg) M8x M10x M12x * M12x M16x * M16x ,075 M20x * ,075 M20x ,500 M20x * ,500 M20x ,100 M24x * ,100 M24x * ,100 M30x ,500 M30x ,500 M30x ,500 M36x ,250 M42x ,750 M48x ,150 M64x ,750 M72x ,300 M90x

73 KANETEC Telsa Meter KCD-MN (Electric drill is optionally supplied) TM- 701 / replacement probe Detecting DC magnetic fl ux density AC magnetic fl ux Contents density Polarities (N,S) (50/60Hz) Indication mt/g selection 1T = 10000G Range Indication Range 0 ~1500mT Measuring Mode Measuring Measuring Range Analytical Indication Mode Ability Accuracy Measuring Range Analytical Ability Indication Accuracy DC 1 * CNC Machine Tool Trolley Standard Complete Set includes: Tool trolley Four trays 28 pieces #40 inserts mT 0.1 mt ±(5%of rdg.+ 3digit) mT 1 mt ±(5%of rdg. +10digit) DC mT 0.01mT ±(5%of rdg. + 5digit) AC mT 0.1 mt ±(5%of 1 * mt rdg mT +20digit) AC mT 0.01mT Function Zero reset Polarity indication Max. detect value hold Auto power off (can be canceled) Display LCD Mode Detect value Numeric value (digital) Polarity Alphabets (N/S) Operating Temperature 0 40 C Power Battery SUM- 3 (1.5 V) x 4 pieces Source Dimension Height 140mm(5.51) width 64mm(2.51) thickness 30 mm(1.18) Mass Approx.250 g/0.54 lb (including batteries and probe) Accessories Probe, batteries and carrying case Option Digital output cable (TM-601DTC) *The measuring ranges are automatically selected. (Note) This product does not correspond to electromagnetic wave measurement. KANETEC Maghand Used to pick up small steel parts, nut/bolts, nails, scrapes, for removal or material handling. Easy to squeeze T handle releases material. Maximum batch of material which can be picked up at one time from 4~9 Lbs., depending on steel content, shape and size Dimensions: φ4.49 x8.94 (10A) φ4.49 x19.69 (50A) Weight: 3.3 Lbs. (10A) 4.2 Lbs. (50A) HMC-10A HMC-50A KANETEC Hand Lifma HL-20A Max. holding power: Dimensions: Handle length: 7.87 Weight: 5.5 Lbs. HMC-10A Suited for pulling/dragging steel material or steels, and carrying work, metal molds, press die, etc. A new cam mechanism, used to break contact and release, will not scratch the work surface HL-20A 110 LBF (lateral pulling) 440 LBF (lifting up) 3.94 x5.51 x1.26 (WxLxH) HMC-50A KANETEC Magbore Drill Guide Mini size Magbore for drill diameter up to 0.26 (6.5mm) Attaching fi rmly even to thin plates of 0.2 (5mm) thickness KCD-MN1-MWK1 KCD-MNV1 Power: Single phase, AC V Magnet dimensions: 4 dia. x 2-3/8 high Overall size (w/o drill): Width 9 ; Height 9.5 (lowered); (extended) Holding power: 770 LBF (on 1 thick mild steel) Maximum stroke: 3.9 Weighs only 12.1 Lbs. Universal Magnetic Base Instant universal position with a single knob Accepts indicator w/ dovetails and 3/8" dia. Magnetic on/off base switch (indicator not included) CE300 Hydraulic Arm 4.0 Lb. CE312 Wheel Dresser 2.4 Lb. CE311PB Magnetic Base 2.5 Lb. Rugged steel construction & roomy bottom shelf space Strays put with positive brakes Cruises smoothly on oversized wheels Lift-out tooling tray load or unload tooling individually at separate sites Ideally size measured at: 33.5"x37.5"x25.5" (HxWxD) Weight: 106Lbs. MACHINE TOOL. SHOP SUPPLY KANETEC Hand Magnet Used in a wide range of fi elds: Machining, casting, HMB-7 food chemical processing, etc. Most suitable for collecting/ removing iron pieces mixed in the medium or on fl oor surfaces, material handling, and holding work while buffi ng or other types of operations HMB-7 Holding power: 55 LBF Weight: 4.2 Lbs. Holding power: 176 Lbs. Dimensions: 2.4 x2.0 x2.2 Arm length: 13.4 CE310 Mechanical Arm 3.5 Lb. Main pole dia.: 0.6 Length: 14.4 CE303N3 Cooling Hose 3.6 Lb. Holding power: 308 Lbs. Tapped hole: M8x1.25 Dimensions: 4.7 x2.0 x2.2 CE322PB Magnetic Base 4.5 Lb. Tray taper max. pot quantity per tray #30 8 #35 7 #40 7 #45 6 #50 5 GX-102 Complete set GX (each) Extra tray # GX GX GX GX GX #50 insert #45 insert #40 insert #35 insert #30 insert

74 MACHINE TOOL. SHOP SUPPLY Deluxe Auto. Lubricant Pump Oil tank capacity: 4.0l : CEA-4A Specification: Operation Intermittent Max outlet volume Durable aluminum alloy construction; Adjustable operation range from 3 sec~3min; adjustable intermittent range from 1 min~ 60 min; 25W motor, single phase, 110V/ 220V power outlet; Autoalarm system reminds you to refi ll; Pump & motor are connected directly to drive; PT 1/8 oil pipe joint oil outlet 4mm/6mm Dimension:10.6 x5.9 x5.9 (LxWxH) Oil tank capacity: 4 l Max outlet pressure motor CEA-4A 3sec~3min 1min~60min 200cc 12kgf/cm 2 110v CEA-4B 3sec~3min 1min~60min 200cc 12kgf/cm 2 220v Auto. Lubricant Pump Effective capacity: 1.7 l, Oil tank capacity:2.0l CESA auto/manual lubricating pumps are ideal accessories for new machines, rebuilt machines and replacement for broken manual one-shot lub pumps. It has capacity of 3-6 c.c. CESA is automatically operate, shop operator still can use the manual lub when it s necessary. : CESA Specification: Intermittent MAX. Pressure Motor Time (Min.) (kg/cm3) CESA05A v CESA05B v CESA10A v CESA10B v CESA15A v CESA15B v CESA30A v CESA30B v CESA60A v CESA60B v GROMAX Rockwell Hardness Tester Conform to IS: and BS: Part I & Part II for Rockwell test Standard accessories: 5-3/4" testing table 2-3/16" testing table 2-3/16" testing table with V groove 1200 diamond penetrator 1/16" steel ball penetrator Rockwell A test block (1pc) Rockwell B test block (1pc) Rockwell C test block (3pc) screwdrivers (2) complete instruction manual dustproof plastic cover Wt. RHT 180 Lbs : CEA-4B Max. load 330 LBS Max depth of spindle 2 Initial range load 22 LBS below base Depth of throat 5 1/4 Base size 7 x18 Height 24-1/2 Load range 132 LBS 220 LBS 330LBS Penetrator Diamond 120 ball 1/16 Diamond 120 Test scales Rockwell A Rockwell B Rockwell C Suitable for test on case hardened steel Annealed ferrous & Non-ferrous metal Annealed hardened & tempered on deep case hardened steel Auto. Lubricant Pump Oil tank capacity:2.0l Motor: 110V 220V Discharge Timer (0~12 seconds-adjustable) Lubricator cycle timer (1~180 minutes-adjustable) Manual feed push button switch Low level fl oating switch 2 liter lubricant reservoir Volt CESD-A 110V CESD-B 220V Power rating 30W Current 0.8A/110V, 0.3A/220V Discharge Volume 2.2cc/ second Discharge Timer Setting 0~12 seconds Discharge Pressure 120 psi Lubricator cycle timer setting 1~180 minutes Weight 7.9 lbs Auto. Lubricator Adjustable discharge volume 0-5cc Motor-driven piston pump. Rugged construction provides extended trouble-free operation. Reservoir capacity 1.8L (usable) Oil viscosity range 150~8000 ssu at operating temp. Discharge pressure: 60 psi max. Single phase synchronous induction timing motor 50/60 Hz Dual voltage connect either 110v or 220v AC Lubricator Cycle Time in minute 50 Hz 60Hz Discharge 1~5CC DIscharge Pressure 75 psi (Max.) Tank liter L5P-L /left hand each L5P-R /right hand each Manual Lubricator Manual Pump/Hand Oiler The surface coated by paint is endurable Made of special aluminum alloy and assured no leakage by pressure leakage tests Suitable for general lubrication oil Oil capacity can be adjusted CTA-8L CTA-8R Discharge 8 cc Max. Discharge Pressure 213 psi Tank 600 cc CLA-8 Effective 400 cc Discharge Bore PT1/8 Discharge Ports Left/Right each 1 output CLA-8 CTA-8R CTA-8L (vertical) (horizontal-right) (horizontal-left) Milling Machine Power Feed For Bridgeport & Bridgeport Type Machine Most Imports. We can upgrade & repair your old power feed. Please call for more infomation Smooth Running With High Torque; New & Stronger Design Assures Long Trouble Free Life; All Spare Parts In Stock For Easier Maintenance Driving... Variable Speed Torque Series: 135 Lbs/in, 250 Series: 150 Lbs./in Speed Range RPM Rapid Speed RPM +10% Torque Wt lbs/inch lbs AL-235X Longitudinal Feed AL-235Y Cross Feed AL-235Z Knee Feed AL-250X Longitudinal Feed AL-250Y Cross Feed AL-250Z Knee Feed AL-99 (for mill and drill machine) GROMAX Air Power Drawbar One-Year Warranty Hand Pressing Lubricator Discharge DIscharge Pressure Tank DIscharge bore CKE-8 ADB158-V 8CC 70 psi 1 liter φ4 or φ6 each Suitable for Bridgeport Mill Reduce operator fatigue, minimize tool-change-time. Available for most manual & ADB158-S CNC mills with standard R8, #30 or #40 taper tool holders. Easy to install - No special drawbar necessary use the existing drawbar, install in 10 minutes. Pre-connected assembly-use compressed air only, no electrical wiring needed. Operated on shop air supply-fi lter/ lubricator, regulator and gauge are included with each unit provide clean oiled air to ensure long lasting life. Use standard shop air pressure: approximately 90 P.S.I. ADB158-V (variable speed) ADB158-S (step pulley) Hand Pull Oiler Discharge 6.5CC DIscharge Pressure 43 psi Length/Max. Length 3.7 /5.7 Stroke 0.9 Outer Dia. φ0.75 BME-6 each Suitable for Universal Cutter & Tool Grinder G40 (Page. )

75 20/24/40 Heavy-Duty Digital Caliper Precision Dial Caliper MACHINE TOOL. SHOP SUPPLY Digital Micrometer & Set Extra long 4 jaws Inch/metric Stainless/hardened.0005 resolution ABS/Zero function 6/8/12 Digital Caliper Inch/metric reading On/Off button on front Inside/outside jaws Floating zero function Depth measuring rod Extra large numerals Fitted plastic case DC6 DC8 DC12 DC20 DC20 DC24 DC40 Precision V-Block & Clamp Set All v-blocks are square, parallel & centered within ; One reversible swing-away clamp is provided with each v-block; Side slots allow easy clamping to almost any work space; Comes in matched pair Length Width Height Min. Max. GTV /8 2-3/8 2 13/64 1-3/16 GTV /8 4-1/8 3-1/16 9/32 2-9/16 Range (Metric/inch) (Black) (White) (Metric/Inch) (Black) (White) (Metric/Inch) (Black) (White) 0-12 Made of stainless steel & hardened throughout; Large clear adjustable dial.; 4-way measurements (inside, outside, depth & step); Covered rack for long lasting life & chip free operations; graduation/0.1 rev. Deluxe 52 Pieces Steel Clamping Kit Fits all bridge port type machines; Metal rack; Table slot 5/8 ; Stud size: 1/2-13 KT Metric Gage Block Set 47 & 87 PCS Anvil & spindle hardened & ground; Carbide tipped faces; Quick & easy zero adjustment; graduation. Range L L L L L (3Pcs/Set) L (4Pcs/Set) L (6Pcs/Set) Outside Micrometer & Set Please check online catalog at Crisp clear graduations; Hardened & precision ground anvil spindle thread with micro-lap fi nish on end; Ratchet stop & spanner wrench; Stain chrome fi nish; graduation; Carbide faces Electronic Digital Micrometer Dial Test Indicator Automatic reversing; Jeweled bearings; Trigger response to lightest pressure; 5/32 & 3/8 diameter shank; Dovetail mounts DI500 DI1000 Graduation Range Reading Dial Indicator Range DI DI DI DI graduation 0-100; Stainless steel parts; Jeweled movement; Extra long spring ensure uniform pressure through entire travel of spindle; Easy to read revolution counters Grade 3 Carbide Gage Block Set 81-Pc Hardness HRC 70 Grade 3 accuracy +8 / -4 Millions Comes with case & calibration certifi cation GB207 Meets or exceeds federal c; Comes with wooden case & certifi cate; Made of high grade alloy steel Metric gage block set detail: 87 PCS: 9 blocks 1.001~1.009mm; 49 block set 1.01~1.49mm, 0.1mm steps; 10 blocks 10~100mm, 10mm steps JS Description Grade GB PC GB PC NIST Calibration Certificate pcs/ set Gage Block Set 36-Pc & 81-Pc Made of high grade alloy steel. Each set is calibrated to meet or exceeds Federal Specifi cations GGG-G15A. Comes with wooden case & certifi cate; Surface hardness HRC 64; Accuracy: Grade 2 +4 / -2 Millionths Grade 3 +8 / -4 Millionths Grade B +50 / -50 Millionths Grade Description GB PC. GB203 B 36 PC. NIST Calibration Certificate 36 pcs set GB PC. GB PC. GB206 B 81 PC. NIST Calibration Certificate 81 pcs set Inch/metric conversion; Carbide-tipped spindle Range Graduation L /0-25mm /0.002mm Indicating Micrometer L Carbide tipped measuring faces Easy 0 Adjustment Case included Range Graduation L L Steel Plug Gage Set Uniform 2 length with hardness HRC 61; Smooth fi nish 10 micro or better; Accuracy within Range # Of Gages GB GB GB GB GB GB GB GB

76 MACHINE TOOL. SHOP SUPPLY Cyanoacrylate Adhesive (CA) CAS/CAI Series Standard Cyanoacrylate (Ethyl Cyanoacrylate) CAG Series Rubber Toughened Cyanoacrylate (Ethyl Cyanoacrylate) CAR Series Odorless Cyanoacrylate (Alkoxy-Alkyl Cyanocrylate) CAA/CAD Series Accelerators & Debonders CAE Series Epoxy CA Series Cyanoacrylate Adhesive (CA) Cyanoacrylate Adhesive/Instant Glue (Wholesale) Cyanoacrylate Adhesive (CA) is an instant, quick-set adhesive. The uniqueness in the setting speed and strength of bonding power is great for automobile, electronics, machines, furniture, precision devices, and musical instrument. CAS/ CAI Thick CAS/ CAI Thin CAS/ CAI Medium CAR Ordorless medium Standard Cyanoacrylate (CAS/CAI) Cyanoacrylate CAD Debonder Grade Viscosity Curing Application 0.5 oz. 1 oz. 2 oz. 16 oz. Speed Thin 5 cps 3 sec. (bond in 1~5 sec.) Used as a wicking grade. Work great on most materials especially balsa wood. Penetrate into the wood more than just a surface. Excellent adhension for model assembly and repair. CAS-105 NA CAS-110 NA CAS-120 CAI-1605 Medium 100 cps 15 sec. (bond in 5~10 sec.) Thick 700 cps 45 sec. (bond in 10~15 sec.) This gap fi lling formula fi lls gap up to.006 with higher strength and good fi xture time bond to balsa wood, plastic, rubber, metal, work well on cardboard and leather. Used as big gap fi lling. A slightly slow curing grade allows alignment of components. Work well on plastic model assembly. Bond materials include rubber, metal, fi berglass and plastic. CAS-205 NA CAS-305 NA CAS-210 NA CAS-310 NA CAS-220 CAS-320 CAI CAI Standard Cyanoacrylate (CAS/CAI) / For Large users or refill: Size Grade Viscosity Curing Speed Type CAI oz. Thin 5 cps 3 sec. Ethyl CAI oz. Thin 50 cps 8 sec. Ethyl CAI oz. Medium 100 cps 15 sec. Ethyl CAI oz. Medium 300 cps 30 sec. Ethyl CAI oz. Thick 700 cps 45 sec. Ethyl CAI oz. Thick 1500 cps 90 sec. Ethyl CAI lb. Viscosity includes 5, 100, 300, 700, 1500 cps. 5-gallon industrial package. Ethyl Rubber Toughened Cyanoacrylate (CAG) Grade Viscosity Curing Speed Application 1 oz. 2 oz. Thick 700 cps 45 sec. Excellent for ultra gap fi lling capabilities. Used where fl exibility and vibration resistance is needed. CAG-2510 CAG-2520 Odorless Cyanoacrylate (CAR) Grade Viscosity Curing Speed Application 1 oz. 2 oz. Thin 5 cps 3 sec. Specially formulated with no odor, no fume to avoid irritating the nose and eyes. Reduce blooming and frosting. Safe for all hobby foam. Excellent adhension balsa, plastic, rubber. CAR-110 NA CAR-120 NA Medium 100 cps 15 sec. Best recommend for clear plastic models. CAR-210 CAR-220 Accelerator & Debonder (CAA/CAD) Grade Function Application 2 oz. 8 oz. 1 gal. Accelerator Extremely fast acting for instant glue Strong solvent base accelerator force cyanoacrylate cured instantly. Expand gap fi lling capabilities. CAA-20 CAA-80 CAA-1280 Mild acting for instant glue. Safe use on foam, plastic Mild solvent base accelerator force cyanoacrylate CAA-201 CAA-801 and painted materials cured instantly. Expand gap fi lling capabilities. Debonder This debonder is for unsticking of fi ngers. A few drops will dissolve the cyanoacrylate, and then wash off with hand soap and water CAD-20 CAD-80 Epoxy (CAE) Working Time Set Time Function 4 oz. 8 oz. 3 min. 5 min. Quick-setting, high strength and waterproof CAE-05 CAE min. 30 min. Slow-setting, high strength and waterproof CAE-30 CAE-308

77 GROMAX Powerful-Hydraulic Radial Drilling Machine Machine made of Meehanite casting with rib striped structure for extra rigidity to handle heavy-duty operation All Gears are made of chrome-molybdenum alloy, hardened and ground, to ensure a durable gearbox Hydraulic clamping system: Easier to operate(simply push a button, stronger and quicker to hold or release) Speed Preset: Preset the spindle speed for the next operation while machining Base plate has T-slots and drain channels Built-in coolant system PH-1312DH shown Specification PH-812DS PH-1312DH PH-1612DH (Cast iron/steel) -Drilling 2 / 1-1/2 2-3/8 / 2 2-5/8 / 2-1/4 -Tapping 1 / 3/4 2-3/8 / 2 2-3/8 / 2 -Boring 4-1/8 / 2-3/4 7 / 4-3/4 7-3/8 / 5 Spindle Stroke 8-1/ / /16 Spindle Bore No. 4 No. 5 No. 5 Spindle Motor 2 HP 5 HP 7.5 HP Net Weight 2800 lbs lbs lbs. Packing Dimensions 59 x30 x85 91 x40 x x40 x101 GROMAX Vertical Turret Milling Machine 3HP Spindle Motor, R8 Spindle Taper 4,200 rpm spindle speed with HI-LO gear Hardened & Ground with turcite-b coating guide way C7 Double nut precision acme lead screws for high accuracy and long lasting FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability Anti rust chrome quill Standard way covers on all three axes Tool box & Tools Precision APEC class7 spindle bearing to ensure spindle run out within One shot lubrication system Built-in Quartz work light MILLING MACHINE & ACCESSORIES GROMAX Heavy Duty Upright Type Drilling Machine Rugged construction - ideal for medium to heavy-duty large holemaking production Large production grade work table: 25.5 x 20 3HP Spindle motor Spindle Speed: RPM(12 speeds) Automatic feed: 3 Speeds:0.0039, 0.007, Column diameter: swing Specification: GJ216 Swing Span 21.6 Drilling capacity (steel)1.57, (cast iron)2 Tapping capacity (steel)1, (cast Iron)1.18 Table Travel Height 86.6 Net WT lbs. Your Cost GROMAX Vertical Knee Mill Dial Type Machine Size 4V Table size 12.6 x 52 Longitudinal travel (manual/ 27.6 / 26.8 power) Cross travel (manual/ power) 10 / 9.5 Vertical travel (manual/ power) 14.3 / 13.8 Weight of the machine 6160 LB Overall dimensions (L x W x H) 91 x 69.7 x 80.7 GROMAX Bed Type Universal Milling Machine Specification: MV1054-3EV Table: 10 x 54 Longitudinal travel (X-axis): Cross travel: Z axis quill travel: 5 Knee travel (manual): 16 Quill diameter: (86 mm) Spindle nose to table top (D): ( mm) Load capacity: 704 lb Spindle taper: R8 Spindle Speed (r.p.m.): 70 to 4200 rpm with Hi/Lo gear Transmission of spindle & motor: Timing Belt Spindle center to column front to ( mm) surface: Ram Travel: 19 (483 mm) Head: Swivel (left/right) : 90 degree Tile (front/back): 45 degree Motor: Spindle motor/max torque: 3HP (Std.) KVA rating: 4KVA, 15amps Coolant pump (optional) 1/8 Hp Lubrication pump: Power requirement: 4 KVA, 3 Phase voltage Length X Width X Height (LXWXH): 102 x 77 x 84 Net Weight: 2,900 lbs. Individual Catalog is available: UH-1250A U-1250B U-1000B Work Table WxL 14.4 x x x72 Longitudinal travel Spindle nose to table 2~20.8 2~20.8 2~20.8 Spindle cente to Arbor arm is used 2~20.8 2~20.8 2~20.8 table (Horizonatal) Arbor arm isn t used 14.4~31.6 Cross travel Table load max Lbs Lbs Lbs. LengthxWidthxHeight 120 x86 x x86 x x86 x73.2 Floor space 170 x x x86 Net weight (approx.) 7040 Lbs Lbs Lbs. GROMAX Universal Milling Machine Best Tool for Helical Machining Machine 2HU Table size 10 x 35 1/2 Overall dimensions (LxWxH) 55 x 52 x 58 Net Weight 2860 lbs Special 7,950.00

78 MILLING MACHINE & ACCESSORIES GROMAX Vertical Turret Milling Machine Feature: Hardened & Ground with Turcite B coating guide way. C7 Double nut precision acme lead screws for high accuracy and long lasing FC30 Meehanite castings main frame with annealed & stress relieved for long term reliability Anti rust Chrome quill Heavy duty dovetail slideway on X, Y & Z axis Precision APEC Class 7 spindle bearing to ensure spindle run out within Built in work Light One Shop lubrication system Standard way cover on three axis Tool box & Tool MV949 shown 3HP 9 x42 Table Travel: 30 x12 x16 Quality Machine Tool at Affordable MV1054 shown 3HP 10 x54 Table Travel: 38 x16 x17.5 Gromax Package Special Includes: 2-axis DRO system Longitudinal power feed (AL-235X) Installation B C All machines in stock. Ready to go!! Call for details. MS949 Step Pulley A MV949 Variable Speed MV1054 Variable Speed Work table / 9 x 49 9 x x54 10 x54 T-Slot Size 5/8 16mmx3x64mm 16mmx3x65mm 5 / 8 Longitudinal travel (X) Cross travel (Y) Knee travel (Z) / 2 Quill travel Ram travel B C MK1054 Variable Speed D Quill diameter 3-3 / / 8 Spindle taper R8 R8 (NST30) R8 (NST30) N.S.T. 40 Spindle speed range 80~5440 RPM (16 steps) 70~4200 RPM 70~4200 RPM 70~3600 RPM Auto Quill feed per rev per rev per rev per rev. Spindle Motor 3 HP 3 HP 3 HP 5 HP Electrical supply 60 Hz/ 3 phase/ 220 V prewired 60 Hz/ 3 phase/ 220 V prewired 60 Hz/ 3 phase/ 220 V prewired 60 Hz/ 3 phase/ 220 V prewired * 440 V available upon request * 440 V available upon request * 440 V available upon request Load 600 Lbs 704 Lbs Packing Dimenstion 77 x65 x82 87 x72 x87 Weight 2200 lbs 2200 lbs 2900 lbs 3800 lbs (mill only) MS949 MV949 MV1054 MK1054 (with package) MS949P Run out of the spindle taper Perpendicularity of the table way to saddle movement / in 12 MV949P EVS-Mill (with package) MV949E Parallelism of the table top with: A) Transverse movement / in 12 B) Longitudinal movement / in 12 Runout of Spindle: A) B) POR MV1054P Transverse of the column, perpendicularity in A and B plan: A) B) Perpendicularity of the spindle with table top (sweeping) A) B) / in 12 MK1054P POR MV1054E MK1054E (mill with EVS head) 0 POR Single-Phase Head add Ram transverse with table top: / in 12

79 GROMAX E.V.S. Head D MK1054 shown 5HP 10 x54 Table Travel: 38 x16 x17.5 NEW!! Hydraulic Tapping Machine (220V) MH-E300R8 MH-E300NT 10 Great Reasons to Go EVS-Mill 1. 3HP high effi cient motor for high torque output 2. Infi nite RPM constant spindle speed. Change in no time (0-4 sec.) 3. C.N.C. vector type A.C. Frequency drive 4. Machine can run on single or three phases without changing the wiring 5. Low maintenance and down time cost because of no plastic insert, key and moving pulley. 6. No RPM changer break down, but accurate reading on RPM to prolong tool life 7. Electronic and mechanical brake for fast spindle stop 8. No belt slippage for high effi cient torque output 9. Boring and tapping application 10.Save energy costs up to 35% 3 HP Rapid positioning and high machinery speed increase productivity Lower tap damage plate, higher thread accuracy Tap shall never break for tapping through-hole or blindhole Tapping for heavier work piece requires large work area Lower machining cost than by CNC machine, drilling tapping machine or manual tapping operation Easy operation, no experience required Standard Accessories: Hydraulic Tapping Spindle Parallel Arm Radial Jib Table Mounting Column Choose any six Safety Clutch Work Table and Cart Tapping Adapters Specifi cations: Hydraulic Motor, Pump and Box Computer-Controlled Device HM-22 HM-32 HM-50 For Tap M3~M22 M4~M32 M8~M60 Speed 150~400rpm 0~200rpm 0~100rpm Work Range Max. Radius Min. Radius Power Supply 3~x380V; 50Hz 3~x380V; 50Hz 3~x380V; 50Hz Motor 5HP 5HP 7.5HP Hydraulic 2030 Lb/inch 2030 Lb/inch 2030 Lb/inch Pressure Weight 660 Lbs. 715 Lbs. 770 Lbs. GROMAX Precision Vertical Milling Machine Air Tapping Machine MILLING MACHINE & ACCESSORIES CNC Ready With All Ball Screws Digital Frequency Drive System AE Series: Portable Type AE AE AE For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range (Max. Radius) Weight 26.4 Lbs Lbs Lbs. AS Series: Short-Arm AS-08/II AS-12/II AS-16/II For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range Weight AT-I Series: Simple AT-08/I AT-12/I AT-16/I For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range Max. Radius Min. Radius Weight 39.6 Lbs Lbs. 44 Lbs. AT-II Series: Long-Arm AT-08/II AT-12/II AT-16/II For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range Squareways Y & Z axes, hardened & ground to RC52 Rubber way cover for knee and crossfeed way Precision rolled ball screws AC-3KV shown Licensed Meehanite casting 3HP/ 10 x54 Table BIJUR autolube system Travel: 36 x16 x16 Chrome satin dials Dish-in coolant base All-fuse breakers Digital inverter motor control provides great versatility through its programmable front panel to fi ne tune motor operatig parameters. Max. Radius Min. Radius Weight 44 Lbs. 44 Lbs Lbs. AT-20/AT-22: Heavy-Duty AT-20/II AT-22/II For Tap M4~M20 M4~M22 Speed 150/400rpm 90/250rpm Work Range AC-3KV AC-3KVF Working surface 10x54 10x54 Longitudinal travel Cross travel Vertical knee travel Ram travel T-slot number, size 3, 5/8 3, 5/8 Main motor 3HP 3HP Head moves (right to left) Head tilts (front to back) AC-3KVF shown Spindle drive Variable Variable 3HP/ 10 x54 Table Spindle speed 50~4500rpm Travel: 36 x16 x16 Spindle taper R-8 R-8 Power quill feeds , , (in./rev.) 0.003, 0.003, Quill diameter 3 3 / / 8 (chromed) Quill travel 5 5 Weight approx Lbs Lbs. Max. Radius Min. Radius Max. Radius Min. Radius Weight 68.2 Lbs Lbs.

80 MILLING MACHINE & ACCESSORIES Features 220 Volt/3-Phase One Year Warranty National Dealer Network On-site or Classroom Training Available Financing GROMAX Bed-Type Mill With CENTROID Control System Features and Table B2VS B3VS Working Surface 10 x54 12 x60 X Axis Travel Y Axis travel Table Load 1500 LBS 2200LBS Spindle Head Spindle Motor 5HP 5HP Spindle Drive AC Programmable AC Programmable Spindle Taper NT30/40 or R8 NT40 or CAT40 Spindle Speeds rpm rpm Spindle Head Travel - Z Axis Quill Diameter 3-3/8 4-1/8 Quill Travel 5 5 Machine Net Weight 4500 LBS 6500 LBS Performance Servo Motors Per Axis 29 /LB.DC 29 /LB.DC Resolution Rapid Traverse (x,y,z) 150 IPM 150 IPM (with M400 controller) Design and specifi cations are subject to change without notice GROMAX Milling Machine Head For Bridgeport or Bridgeport Type Taiwanese Mills Standard Heavy-duty meehanite castings Hardened & ground square ways Turcite-coated surfaces Hardwheels for all axis Manual or automatic quill Easy to use control with Mastercam Auto lubrication Power draw bar Halogen work light Coolant system Table top enclosure Base chip coolant drop pan Optioal Equipment: Fully Closed Way Covers on Column Rear Column Chip Guard 4th Axis Drive Interface Rotary Table(s) Tooling Package Clamping System Precision CNC Vises Pallet Vises Disitizing and Probing Packages TT-1 Touch-off Kit Second Language Engraving Software 40 /LB Motor Upgrade MPG Handwheel CENTROID M-400 CONTROL WITH CONVERSATIONAL AND G-M CODE PROGRAM- MING. CENTROID M-15 AND M39 CONTROL ALSO AVAILABLE Three Axis Simultaneous Canned Cycles 10 Color LCD Screen With Graphics Fast Setup Parts Pentium Processor 32 Bit PC Based DSP Technology Floppy Drive Coolant Controls** Ethernet Card Output For Auto Lube RS-232 Communication Programmable Spindle Hard Drive M400 Console With Scaled Keyboard Mastercam Level 1 M15 Console With Alpha Numeric Keypad Expandable to 4th Axis* M400 Runs On 220V AC 3-Phase Power Teach Mode M15 Runs On 110V AC Power 2 & 3D Graphics Notes: *Marked item is not available on M15 Math Help **Marked items are optional on M15 Mounting Data: 5 HP Milling head bolt circle is φ6.5" 3 HP Milling head bolt circle is φ6.0" Complete new mill head for your old machine body or special machinery. Chrome quill with super precision preloaded bearing. Spindle nose taper I.D " / 0.005mm T.I.R. Spindle Taper: R8. Quill power feed: "/ 0.003"/ 0.006" rev Quill Travel: 5" / Quill diameter 3 3/8". Power output: Variable speed 220V/440V/3φ Step pulley 220V / 3φ MH-V100 Variable Speed (3HP/R8 spindle) MH-V Speed Step Pulley (3HP/R8 Spindle) All other spare parts for Bridgeport or Bridgeport type Taiwanese mills are also available. Please call or fax your inquiry. MH-V400 Variable Speed (5 HP/ NT40 spindle) Spindle range MH-V100 Variable Speed 70~4200rpm MH-V step Pulley 80~5600rpm MH-V300 NA NA MH-V400 Variable Speed 70~3600rpm MH-E300R8 3HP EVS Head* MH-E300NT 3HP EVS Head* *220V price. Extra 200 charge for 440V. **5HP also available. Please call. EVS Head : MH-E300R8

81 GROMAX Cartridge Spindle AS Series For CNC Machining Center AS-BT40-A SHOWN AS-BT40-B SHOWN AS-BT40-C SHOWN BS Series For CNC Machining Center BS-BT SHOWN DM4500 Series For CNC Milling Machine Taper Max. Speed (rpm) Motor (HP) PB Series For Surface Grinder Pulley Runout Accuracy Test Bar/300mm (μm) AS-CAT40A CAT YUx40T 8 15 AS-CAT40A CAT YUx40T 8 15 AS-CAT40A CAT YUx40T 8 15 AS-CAT40A CAT YUx40T 8 15 AS-CAT40A CAT YUx40T 8 15 AS-CAT40A CAT YUx40T 8 15 AS-CAT40B CAT YUx40T 8 15 AS-CAT40B CAT YUx40T 8 15 AS-CAT40B CAT YUx40T 8 15 AS-CAT40B CAT YUx40T 8 15 AS-CAT40B CAT YUx40T 8 15 AS-CAT40B CAT YUx40T 8 15 AS-CAT40C CAT YUx40T 8 15 AS-CAT40C CAT YUx40T 8 15 AS-CAT40C CAT YUx40T 8 15 AS-CAT40C CAT YUx40T 8 15 AS-CAT40C CAT YUx40T 8 15 AS-CAT40C CAT YUx40T 8 15 Highest spinning speed: /5000/6000/8000 rpm Wimble holde diameter: BT50 Power: 15kw/ 22kw Bearing diameter: 7020x4pcs,7018x2pcs Accuracy: Testing bar 300mm/0.01mm Temperature: Room Temperature +20 o C Highest spinning speed: 6000/8000/10000 rpm Wimble holde diameter: BT40/CAT40/DIN40 Power: 7.5kw/ 11kw Bearing diameter: 7014CP4x3pcs,7012CP4x2pcs Accuracy: Testing bar 300mm/0.008mm Temperature: Room Temperature +15 o C Max. Temperature Rise ( C) DS Series For CNC Milling Machine DS-BT SHOWN MILLING MACHINE & ACCESSORIES Highest spinning speed: 10000/12000/15000 rpm Wimble holde diameter: BT30/CAT30/DIN30 Power: 1.75kw Bearing diameter: 7008CP4x4pcs DS-BT (15000rpm) PF Series For Surface/Cylindrical Grinder DM SHOWN Highest spinning speed: 8000/10000/12000 rpm Wimble holde diameter: BT40/CAT40/DIN40 Power: 5kw/ 7.5kw Bearing diameter: 7012CP4x2pcs,7010CP4x2pcs Accuracy: Testing bar 300mm/0.008mm Temperature: Room Temperature +15 o C KE Series For Surface/Cylindrical Grinder PB-614A-10 SHOWN PB-618A-20 SHOWN Standard spindle speed: 3600 rpm Conoid diameter: 1/4 Power: 1HP (PB-614), 1.5HP/2HP (PB-618) Bearing diameter: NN3006KP4X1pcs (PB-614) NN3006KP4X1pcs,7208CP4x2pcs (PB-618) Accuracy: Runout (in Taper) 1.5 μ Temperature: Room Temperature +12 o C DM-80 Series For Tool & Cutter Grinder PF-80A SHOWN Spindle Speed: 1200~6000rpm Conoid diameter: 1/5 External threads Power: 1HP/ 2HP Bearing diameter: 7206CP4x4pcs Accuracy: Runout (in Taper) 1.5 μ Temperature: Room Temperature +10 o C J Series For CNC Turning Center KE-80A SHOWN Spindle Speed: 1200~6000rmp Conoid diameter: 1/4 internal threads Power: 1HP/2HP Bearing diameter: 7206CP4x4pcs Accuracy: Runout (in Taper) 1.5 μ Temperature: Room Temperature +10 o C DM SHOWN Spindle Speed: 800~8000rpm double spinning Conoid diameter: 1/4 Power: 1/2HP~2HP Bearing diameter: 7206CP4 Accuracy: Runout (in Taper) 2 μ Temperature: Room Temperature +12 o C J270A SHOWN Highest spinning speed: 4000rpm Chuck diameter: 8 Power: 11kw/15kw/22kw Bearing diameter: NN3020K, Accuracy: Runout (in Spindle Nose) 3 μ Temperature: Room Temperature +20 o C

82 MILLING MACHINE & ACCESSORIES Muti-Purpose Milling & Drilling Machine Versatile use: milling, drill and tapping; Sturdy construction not limited to skilled operators; Adjustable headstock can be swung 360 up or down to meet various requirements; Bronze adjustable lead screw nuts; 9 x 30 table, 12 speed, 2 HP, 1 PH Motor Standard Accessories: 3 1/2" Angle mill vise 3" Face Cutter 5/8" Drill Chuck R8 Arbor Set Wt. RF-31 3φ 660Lbs RF-31 1φ (stand is not included) Optional Accessories RF-30B.1 Power Table Feed RF-30B.2 Floor Stand AL-99 Power Feed RF-31 Universal Right Angle Attachment Fits all mills with 3-3/8 quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Concave & convex grove Made of heat treated alloy steel Set includes: right angle head, arbor support & milling arbor R8 Spindle Description Complete Set URAMHR8 Individual components Right Angle Head URAMHC Arbor Support URAMHE Milling Arbor URAMHG NT Spindle Description Complete Set URAMHNT30 URAMHNT40 (100mm) URAMHNT41 (105mm) URAMHNT42 (110mm) Individual components Right Angle Head URAMHD Arbor Support URAMHF Milling Arbor URAMHH 1 R8 Stub Arbor Portable Electro Magnetic Drill & Tapping Stand MDT-930A Drill 1/4 ~1 1 / 4 6φ~32φ Tapping 3/8 ~1 1 / 8 10φ~30φ Power 220V 3-Phase Motor (HP) 2 Speed (R.P.M.) 756/456/303/186/127/51 Max. Depth 4.33 Body Movable Size 5.91 Y-Axis Transversal Move 0.79 Turning Degree 330 Electro. Magnetic Size 5.31 X11.02 Electro. Magnetic Force 24500N Height Torsion Fixture Standard Fitting 7 Drill Sleeve Standard Fitting 3 Machine Weight 155 lbs. Portable Magnetic Drilling/Tapping Stand Portable! Magnetic Base!! Weight MDT-930A 155Lbs. * All the drill-sleeves, tapper set, and the clamp set of hole cutter are designed with a rapid adaptor to streamline production * It is designed for tapping, perforating, and drilling by using twisting-drill and center-free-drill. With these 3 functions are very convenient for outdoor work * Most suitable for cutting workpieces that are not easily to be moved. Workpieces are like large steel plate, steel skeleton of building and bridge, heavy- duty machine...etc. PM-A22S Power (AC) 110V, 50/60Hz Motor Rated Output 1350W Motor Rated Ampere 12A Speed without Load 300/750rpm Drill 1/16 ~7/8 Drill Hole Travel 31/4 Body Movable Size 315/16 Turning Degree 60 Y-Axis Transversal Move 0.39 Magnetic Size 4.13 x7.09 x2.76 Magnetic Force 8820N Height Machine Weight 60 Lbs. Vertical Slotting Head Forms intricate shapes, extruded dies and complex patterns; Mounts on the rear of the V-Ram (suitable for any Bridgeport type mills); Easy adjustment to make any key or groove on cone or tilted surface; Vise-type clamping fl ange (Easy mounting and discharging ); Swings the turret 180 to position if over the table and ready to work; Uses a vertical tool motion to shape and slot. VSH-100A(Cutter Set) VSH-100B(Flange) VSH-100 (head) VSH-100A (cutter set) VSH-100B (fl ange) VSH-100(Tool Cutter) All the safety torque fi xtures and drill sleeves are designed with rapid adaptor. This makes it more convenient to change the cutters. With the safety torque device on the tap fi xtures can adjust to various needs. Different materials and sizes need different torque and this can prevent the tap from being damage. The revolving speed can be changed during machining. The reducer is made with synchronizing gears and the gears are absolutely safe. The control panel is located on the top of the machine. This can prevent from damage if the machine falls to the ground. Having six-step variable speed (max.756 rpm & min. 51rpm) offers various selections to cut different materials and different sizes of hole. The total height is 22.5 and the center of gravity is only Having a low center of gravity makes the machine stable and secure. VSH-100 Sizes: 4mm, 5mm, 6mm, 7mm, 8mm, 10mm Specification: Stroke: 0-5 Strokes per 35, 54, 79, 112, 160 Motor: 3/4 HP 3 phase, 220V/60HZ Motor Speed: 1370 rpm Heavy-Duty Gear Head Portable Magnetic Cutting Unit * This drilling machine has 2 speed rates for different sizes of cutting * The coolant tank is built-in the machine body. It reduces the damage of the machine and increases work effi ciency * The cutter-lifting unit is designed with a spindle cylinder which is more durable than conventional slide plate * Most suitable for drilling steel skeleton of building, large steel plate, steam furnace etc PM-50G Power (AC) 110V, 50/60Hz Motor Rated Output 1350W Motor Rated Ampere 12A Speed without Load 300/750rpm Hole 5/8 ~131/32 Magnetic Size 3.94 x7.87 x3.03 Magnetic Force 11760N Height Machine Weight 56 Lbs.

83 Precision Double Clamping Vise This twin vise offer 2 clamping stations, 6 x4 model Ideal for jobs where it is necessary to maximize the number of parts in the work envelop and increase the number of machining sequences Wt.(Lb) in a single setup DL44 (4 ) accuracy DL64 (6 ) 101 In case of different sizes for two work-pieces, the clamping operation can still be performed when the length difference is less than Once the center stationery jaw is removed, this vise become a center clamping angle lock vise. This vise can be change into a super open vise by removing the center stationery jaw and then fi xing the rear movable jaws. UNIT: (Inch) A B C D E F G DL /8 3-3/ /4 3-11/ /8 DL / /16 1-3/4 4-7/ /16 LBS H Wt. 3-15/ / GROMAX Super Lock Vise Material is highest quality ductile iron 80,000 psi, flame hardened bed, standard swivel base, hardened & ground jaw plates, screws hardened & threads ground 1 lb. of force horizontally, 1/2 lb. of force vertically pushes jaw downward Coolant through & enclosed lead screw Removable hinged handle for fast locking Provides better clamping pressure Eliminates hammering HAV-6.5 has 8 bigger jaw opening than HAV-6 (with the same jaw width, depth and overall length) (Taiwan) (China) HAV-4 New HAV-6T HAV-6C HAV-6.5 HAV-8 HAV-12 Jaw Opening 4 3/16 5 1/2 8 New 8 5/ /8 Jaw Width 4 1/ /2 Jaw Depth 1 1/4 1 1/2 1 1/ /4 Overall Length /4 8 1/ /2 Weight 46.3 lbs 138 lbs 150 lbs 195 lbs 320 lbs (Taiwan) (China) N/A N/A N/A GROMAX Hydraulic Machine Vise Feature: Spring-disc cylinder absorbs vibration in cutting process Alloy steel jaws hardened & ground High tensile strength cast iron body Hardened & ground slide way Adjustable clamping force Enable rigid clamping HH100 HH150 HH200 Jaw width Jaw height Jaw open Total length Total height WT(lbs) Multi-Purpose Fixture Vise Feature: Holds odd shapes workpiece; Positive 3-point gripping jaws adjusts jaws position according to the shaped of workpiece Specification: AK 70 AK140 Jaw opening 3 6 Jaw width Overall length Overall height Weight 20 Lbs 80 Lbs GROMAX 6 NC Machine Vise Flatness of all sides to.001" guaranteed modes, upright, left and right side. Up to 15,000 lbs. clamping force. Second Generation Super-Lock Vise NC style allows side by side mounting HMC-6 HMC-8 Jaw Width Total Height Max. Opening Overall Length Gross Weight HMC /4 17-1/2 68 Lbs. HMC /4 23-5/8 172 Lbs. GROMAX MC Universal Blocks Series (4 Faces Type T Slots) BJB Type HIB Type HIC Type A B C D E F G H I J K BJB500X300B POR SIZE up to 800x550 HIB500X300T POR SIZE up to 800x550 HJC500X300T M16 POR SIZE up to 800x550 Unit: mm, Inch Available Please Call for more details. MILLING MACHINE & ACCESSORIES GROMAX Universal Tilting Rotary Table Feature: Extra deep coolant channel 10 second vernier reading, 2 minute tilt reading Satin chrome dials Super low profi le Heavy duty construction Hardened & ground worm gear Wt. Table diameter HUT Lbs 12 Table height (horizontal x vertical) 7.25 x Center hole/ height (vertical) MT5/ 8.19 Direct indexinng 24 DIV Gear ratio 90:1 Accuracy: Surface to center hole squareness Surface to base parallelism Clamping surface fl atness Tapered center bore concentricity Max. cumulative spacing error 45 seconds GROMAX Horizontal and Vertical Rotary Table Max. Variation Inch Flatness Of Clamping Surface (concave):.0006 True Running of Cylindrical Center Bore:.0008 True Running of Tapered Center Bore:.0008 Parallelism Of Clamping Surface To Base: HHV HHV-200 GROMAX Super Index Spacer Type CS-8 Can be used as a dividing header or a rotary table & has the feature of milling, drilling, jig boring & many other common machine shop applications. Standard Accessories: Jaw chuck 2. 6 Division Masking Plates (2,3,4,6,8,12) Face Plate 10 HHV-250 Boring Head C-Type 12 HHV-300 The direct reading adjusting screw is ground after hardening and a plainly marked dial face in non-refl ecting stain chrome allows easy reading and adjustments of " or less; With a variety of shanks, this model takes a 1-1/2-18 threaded shank. BC2 BC3 BC4 Actual Size 2 dia 3 dia 4 dia Overall length 2-13/32 3-5/32 3-1/2 Boring bar 1/2 3/4 1 Hole Center Dist. Between Holes 5/8 15/16 1-1/4 Cross hole dia. 1/2 3/4 1 Offset 5/ /16 Weight 2Lbs 5Lbs 7Lbs 14 HHV-350 Center Hole MT-2 MT-3 MT-3 MT-4 MT-4 WT. (Lbs) Wt CS Lbs Specification: Chuck capacity 8 Indexing accuracy 25 sec. Squareness (Base to chuck).0008 Max. Parallelism over face.0006 Max. Concentricity of mounting fl ange.0008 T.I.R. Concentricity of chuck.0005 T.I.R. Straight Shank Dia BC.1/2 1/2 BC.3/4 3/4 BC.1 1 BC.1-1/4 1-1/4 Optional Accessories CS-8.1 Tail Stock CS-8.2 Dividing Plate (2 pcs set) Shanks and Adapters BC.R8 BC.NT30 BC.NT40 BC.NT50 BC.MT#3 BC.MT#4 BC.MT#5

84 MILLING MACHINE & ACCESSORIES GROMAX Tilting Table Worm and crank handle for easy adjustment. Low profi le design. Adjustable 45 degrees both right and left Angle markings are accurate and easy to read Swivel base available GROMAX Pneumatic Vise Quick operation. Stable and rigid design. Extremely high clamping force. High accuracy and repeatability. Reduces production costs. B A H T-SLOT e Weight HAP Lbs. HAP Lbs. HAP Lbs. HAP Lbs. GROMAX Tilting Table with Swivel Base Worm and crank handle for easy adjustment Low profi le design Adjustable 45 degrees both right and left Angle markings are accurate and easy to read Swivel Base attached This vice can be operated both manually and pneumaticaly. The pneumatic power enables rapid strong clamping of the workpeice which signifi cntly improves productivity. Super-Lock Mechanism ensures jaws are parallel during clamping and eliminates deformation ensuring fi rm and accurate work holding. Design is compact and very simple to operate requiring almost no maintenance. The combination of Pneumatic over Hydraulic Power provides both high speed and extremely high clamping force. These vices are supplied with a mechanical push button valve as standard. A Solenoid Valve is also available for use in automated or unmanned production situations. MODEL B A H T-SLOT e Weight HAP-180S Lbs. HAP-250S Lbs. HAP-380S Lbs. A B C D E F G Weight HPV Lbs HPV Lbs GROMAX CNC Multi power Fixed Super Vise One-Piece Construction provides high rigidity and super precision. Heat Treated Slideways. Super-Lock System holds Jaw down on slideways and prevents Jaw deformation. The vise has 4 reference-surfaces for mounting horizontally sideways or vertically. The patented Multi-Power System built of HIGH GRADE BEARING STEEL provides extremely high clamping pressure. The pressure is more consistent and eliminates all leakage and maintenance problems associated with hydraulic vises. Fixed Hight makes several vises can be used together. This product is suitable for multi-unit applications on both horizontal and vertical CNC Machining Centers as well as Conventional Milling Machines where heavy duty machining requires a very high clamping force. SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B D E F G H I J C1 C2 C3 Weight(kg) HPAC HPAC HPAC GROMAX MULTI-POWER CNC PRECISION FIXED ANGLE VICE FEATURES Shortest Length with Big Jaw Opening Extremely High Accuracy and Repeatability Special MULTI-POWER design enhances clamping force of 0 ~ 6000 KG SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B C C1 D E F G Max. clamping Force H I J K L M Weight(kg) HPAC-130S kg

85 MILLING MACHINE & ACCESSORIES GROMAX CNC PRECISION FIXED VISE This vise has the same features as model HPAC above, but has standard screw clamping instead of the MULTI-POWER SYSTEM. SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B D E F G H I J C1 C2 C3 Weight(kg) HPAV HPAV HPAV GROMAX MULTI-POWER CNC SUPER VISE FEATURES Shortest length with big jaw opening. Extremely high accuracy and repeatability. Specual Multi-power Design enhances clamping forces of 0 ~ 8000 kg SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC60º ) Unit: mm MODEL A B C C1 D E F G Max. clamping H I J J1 K K1 L M Weight(kg) PRICE Force HPAQ kg HPAQ kg HPAQ kg GROMAX ALUMINUM VISE SPECIFICATIONS(Material. Alloy Aluminum, Durable hard anodized vice body) Unit: mm MODEL A B C D E F G H I J Weight(kg) crownfl ex crownfl ex The vise body is made from high tensile aluminum alloy and designed for continuous, heavy-duty operation. It is suitable for use with the groove and hole systems of CNC machining centers and milling machines. FEATURES Quick change jaws Double and centralized chucking in one system Centralized chucking for high precision Standard accessory: Extra 2 PC of Moveable Jaw & 1 PC of Fixed Jaw Moveable Jaw and Fixed Jaw are Available for being Ordered Separately. GROMAX CNC VISE IN-ROW FEATURES HRV-series VISE IN-ROW is a kind of multiple clamp vice. Full set of this vice is made from Tool Steel with heat treatment more than HRC 60º of hardness and then ground precisely ensures long life. It enlarges clamping dimension. No matter what shape of working piece, such as square, round, cylindrical or any irregular shapes can be positioned quickly. Precision gear locating datum plane is adjustable so working piece can be fi xed easily. This vice is suitable for CNC Machining Centers and Surface Grinder,..etc. SPECIFICATIONS (Material: Tool Steel, Hardness over HRC 60º ) Unit: mm MODEL A B C D E F G H I J K P KG HRV setup example HRV HRV HRV HRV HRV HRV HRV HRV HRV HRV HRV

86 MILLING MACHINE & ACCESSORIES Single End Standard length Endmills ***Extended LOC is available. ***Metric sizes are also available. Please call or visit our website at for details. 30 HELIX/RHS/RHC Coated Code: TA (TiAIN) TC (TiCN) TN (TIN) Diam LOC OAL Shank 2 Fute 3 Flut 4 Flute Sauare End Square End Square End Square End Coated Sauare End 2 flut Ball End 3 flute Ball End 1/64 3/64 1-1/2 1/ /32 3/32 1-1/2 1/ /64 3/16 1-1/2 1/ /16 3/16 1-1/2 1/ /64 1/4 1-1/2 1/ /32 3/8 1-1/2 1/ /64 1/2 1-1/2 1/ /8 1/2 1-1/2 1/ /64 1/2 2 3/ /32 9/16 2 3/ /64 9/16 2 3/ /16 5/8 2 3/ /64 5/8 2-1/2 1/ /32 5/8 2-1/2 1/ /64 3/4 2-1/2 1/ /4 3/4 2-1/2 1/ /64 3/4 2-1/2 5/ /32 3/4 2-1/2 5/ /64 13/16 2-1/2 5/ /16 13/16 2-1/2 5/ /64 13/16 2-1/2 3/ /32 13/16 2-1/2 3/ / /2 3/ / /2 3/ / /4 7/ / /4 7/ / /4 7/ / /4 7/ / / / / / / / / /16 1-1/4 3-1/2 9/ /8 1-1/2 3-1/2 5/ /16 1-1/2 4 3/ /4 1-1/2 4 3/ /8 1-1/2 4 7/ / / /2 1 1/ Cutting Diam +.000/-.002 Shank Diam / flute Ball Ball End End Coated Ball End Code Color Type Thickness Hardness Max. Temp. Applications TA (TiAIN) purple-gray PVD 2-5μm 3600HV 87HRC 850C 1560F Sole choice for dry, semi-dry & HSM machining requirements. High hardness and heat resistance for machining toughest materials. TC (TiCN) red-brown PVD 2-5μm 2800HV 84HRC 600C 1110F Very high hardness qualities with excellent lubricity. Multi-layered for higher heat resistance and toughness. Excellent for all kinds of steel. TN (TiN) gold PVD 2-5μm 2700HV 83.5HRC 450C 840F Excellent general purpose coating for all ferrous materials. Good combination of lubricity, heat resistance, and wear characteristics. Corner Rounding Endmills Specialty 4 Straight Flute Form-Relieved with Corner Radius Rounding Endmill Radius Mill specifi cation: Radius Pilot Diameter Specialty Endmills Series High-Helix 60 degree Helix Specifi cations: Cutting Diam / Shank Diam / Sub-Miniature Endmills Twist Drills Fractional Standard length Helix Four-Facet Point

87 VDI Tool Holder DIN69880 GROMAX VDI Tool Holder C1: Square Tool Right-Hand C3: Square Tool Right-Hand Inverted C2: Square Tool Left-Hand C4: Square Tool Left-Hand Inverted C1/C2: Square Tool Right/Left-Hand Dimension (unit: mm) d1 b1 b2 b3 h1(in.) h1 h5 h6 l1 l2 right hand short left hand short / C C / C C / C * C * / C1-2516* C2-2516* / C C C C / C C / C C / C1-8040* C2-8040* C3/C4: Square Tool Right/Left-Hand Inverted Dimension (unit: mm) d1 b1 b2 b3 h1 h6 h7 l1 l2 right hand short left hand short / C C / C C / C * C * / C3-2516* C4-2516* / C C C C / C C / C C / C3-8040* C4-8040* Axial/Radial Toolholder CB1: Axial/Radial Right-Hand CB2: Axial/Radial Left-Hand CB3: Axial/Radial Right-Hand CB4: Axial/Radial Left-Hand CB1/CB2: Axial/Radial Toolholder Right/Left-Hand CB3/CB4: Axial/Radial Toolholder Right/Left-Hand Dimension (unit: mm) Dimension (unit: mm) D B1 B2 B3 H1(in.) H2 H3 H4 L1 L2 right hand left hand D B1 B2 B3 H1(in.) H2 H3 H4 L1 L2 right hand left hand / CB CB / CB CB / CB CB / CB CB CB CB CB CB / CB CB / CB CB / CB CB / CB CB D1/D2: Axial/Radial Toolholder Right/Left-Hand D1: Axial/Radial Right-Hand D2: Axial/Radial Left-Hand Dimension (unit: mm) D B1 B2 B3 B4 H1(in.) H2 H3 H4 L1 L2 α right hand left hand / o D D / o D D / o D D / o D D2-6032

88 VDI Tool Holder DIN Main Excellent price and quality. Satisfaction Guaranteed! GROMAX VDI Tool Holder Materials: 20MnCr5; Hardness: HRC 58+2; Depending on tools, these VDI Tool Holders Description: can be used for turning, drilling, reaming, milling, and threading operations. Our VDI Tool Holders are designed and manufactured in accordance with DIN They are made of high grade alloy steel with precision machining, heat-treatment and grinding. In addition to the above-mentioned producing processes, they are 100% inspected and checked in order to ensure the best performance and reliability. Turning Toolholder B1: Right-Hand Short B3: Right-Hand Short-Inverted B2: Left-Hand Short B4: Left-Hand Short-Inverted B1/B2: Right/Left-Hand Short Dimension (unit: mm) d1 b1 b2 b3 h1 (in) h1 h5 h6 l1 l2 right hand short left hand short / B B / B * B * / B B / B * B * / B1-2516* B2-2516* / B * B * / B B / B * B * B B / B B / B B / B1-8040* B2-8040* B5: Right-Hand Long B3/B4: Right/Left-Hand Short-Inverted Dimension (unit: mm) d1 b1 b2 b3 h1(in) h1 h6 h7 l1 l2 right hand short left hand short / B B / B * B * / B B / B * B * / B3-2516* B4-2516* / B * B * / B B / B * B * B B / B B / B B / B3-8040* B4-8040* B7: Right-Hand Long-Inverted B6: Left-Hand Long B8: Left-Hand Long-Inverted B5/B6: Right/Left-Hand Long Dimension (unit: mm) d1 b1 b2 b3 h1(in.) h1 h5 h6 l1 l2 right hand long left hand long / B B / B B / B B / B B / B B / B B / B B / B B B B / B B / B B / B B B7/B8: Right/Left-Hand Long- Inverted Dimension (unit: mm) d1 b1 b2 b3 h1(in.) h1 h6 h7 l1 l2 right hand long left hand long / B B / B B / B B / B B / B B / B B / B B / B B B B / B B / B B / B B8-8040

89 GROMAX VDI Tool Holder Axial Toolholder Right/Left-Hand VDI Tool Holder DIN Dimension (unit: mm) d1 h1(in.) h1(mm) h3 b2 b4 L2 L4 L5 right hand left hand 30 5/ AX3016R AX3016L 40 3/ AX4020R AX4020L AX5025R AX5025L / AX6032R AX6032L Axial-Radial Toolholder Right/Left-Hand Dimension (unit: mm) d1 h1/in. h1/mm L2 L3 b1 h3 h4 right hand left hand 30 3/ AR3020R AR3020L (R)/88(L) AR4025R AR4025L / (R)/111(L) AR5032R AR5032L / AR6032R AR6032L / AR8040R AR8040L Boring Bar Holder E1: Internal Coolant Flow E1 E3: TG75/TG100 Style (mm) E3 (TG) d1 d3 collet d1 d2 (in) d2 (mm) d3 d4 d5 d6 h1 h2 L1 L2 L3 L4 L5 E1-20X / / E1-20X / / E1-20X / E1-25X / / E1-25X / / E1-25X / E1-25X / / E1-30X / / E1-30X / / E1-30X / / E1-30X / / E1-30X / E1-30X / / E1-30X / / E1-40X / / E1-40X / / E1-40X / E1-40X / / E1-40X / / E1-40X / / E1-40X / E1-50X / / E1-50X / E1-50X / / E1-50X / / E1-50X / E1-60X / / E1-60X / E1-60X / / E1-60X / / E1-60X / / E1-60X / E1-60X / / E1-80X / / E1-80X / E1-80X / / E1-80X / / E1-80X / d1 d3 collet 30 75TG E3-30TG TG E3-30TG TG E3-40TG TG E3-40TG TG E3-5TG TG E3-50TG TG E3-60TG TG E3-60TG TG E3-80TG TG E3-80TG100 d1 E3: ER Style (mm) E3 (ER) d3 collet d3 collet 16 ER16 E3-16ER16 16 ER20 E3-16ER20 20 ER16 E3-20ER16 20 ER25 E3-20ER25 20 ER32 E3-20ER32 20 ER40 E3-20ER40 25 ER25 E3-25ER25 25 ER32 E3-25ER32 30 ER25 E3-30ER25 30 ER32 E3-30ER32 30 ER40 E3-30ER40 40 ER25 E3-40ER25 40 ER32 E3-40ER32 40 ER40 E3-40ER40 50 ER40 E3-50ER40 60 ER40 E3-60ER40 60 ER50 E3-60ER50 d1 Collet is not included.

90 VDI Tool Holder DIN E2: Dual External Coolant Flow Collet Chuck d1 d2 in d2 mm d6 d7 d8 d9 h1 h2 L3 L6 L7 G E2-16x / /16-24 E2-16x / /16-24 E2-16x / /16-24 E2-16x / / /16-24 E2-16x / /16-24 E2-20x / /8-16 E2-20x / / /8-16 E2-20x / / /8-16 E2-20x / / /8-16 E2-20x / / /8-16 E2-20x / /8-16 E2-25x / / /8-16 E2-25x / / /8-16 E2-25x / / /8-16 E2-25x / / /8-16 E2-25x / / /8-16 E2-25x / /8-16 E2-30x / /8-18 E2-30x / / /8-11 E2-30x / / /8-11 E2-30x / / /8-11 E2-30x / / /8-11 E2-30x / / /8-11 E2-30x / /8-11 E2-30x / / /8-11 E2-30x / / /8-18 E2-40x / / /8-11 E2-40x / / /8-11 E2-40x / / /8-11 E2-40x / / /8-11 E2-40x / / /8-11 E2-40x / /8-11 E2-40x / / /8-11 E2-40x / / /8-11 E2-40x / / /8-18 E2-40x / /8-18 E2-50X / / /8-11 E2-50x / / /8-11 E2-50x / / /8-11 E2-50x / /8-11 E2-50x / / /8-11 E2-50x / / /8-11 E2-50x / / /8-18 E2-50x / /8-18 E2-50x / / /8-18 E2-60x / / /4-16 E2-60x / / /16-16 E2-60x / /4-16 E2-60x / / /4-16 E2-60x / / /4-16 E2-60x / /4-16 E2-60x / / /8-18 E2-80x / / /8-18 E2-80x / /4-16 E2-80x / / /4-16 E2-80x / / /4-16 E2-80x / /4-16 E2-80x / / /4-16 Straight ER Style d1/in. d2/in. L6/mm l7/mm Collet SL20-ER25 3/4 1/16~5/ ER25 SL20-ER32 3/4 3/32~3/ ER32 SL20-ER40 3/4 1/8~ ER40 SL25-ER25 1 1/16~5/ ER25 SL25-ER32 1 3/32~3/ ER32 SL25-ER40 1 1/8~ ER40 SL32-ER25 1-1/4 1/16~5/ ER25 SL32-ER32 1-1/4 3/32~3/ ER32 SL32-ER40 1-1/4 1/8~ ER40 SL40-ER25 1-1/2 1/16~5/ ER25 SL40-ER32 1-1/2 3/32~3/ ER32 SL40-ER40 1-1/2 1/8~ ER40 SL45-ER25 1-3/4 1/16~5/ ER25 SL45-ER32 1-3/4 3/32~3/ ER32 SL45-ER40 1-3/4 1/8~ ER40 SL50-ER25 2 1/16~5/ ER25 SL50-ER32 2 3/32~3/ ER32 SL50-ER40 2 1/8~ ER40 Straight TG Style d1/in. d2/in. L6/mm l7/mm Collet TG2075 3/4 3/64~3/ TG TG /4 3/32~ TG TG /64~3/ TG TG /32~ TG TG /4 3/64~3/ TG TG /4 3/32~ TG TG /2 3/64~3/ TG TG /2 3/32~ TG TG /4 3/64~3/ TG TG /4 3/32~ TG TG /64~3/ TG TG /32~ TG F: Morse Taper (mm) DIN69880 Static Holder/ DIN228 F d1 Morse Taper 20 1 F20MT F30MT1 2 F30MT2 3 F30MT F40MT2 3 F40MT3 4 F40MT F50MT2 3 F50MT3 4 F50MT F60MT3 4 F60MT4 Quick Change Tapping D D1 D2 (mm) A TAPP-ER16 ER25 ER TAPP-ER20 ER32 ER TAPP-ER25 ER40 ER

91 DIN Tap Holder *Tapper For COllet DIN 6499 D (mm) D1 h3 L d1 TAP d ER M3-M16 TAP16ER M3-M16 TAP20ER M3-M20 TAP30ER M3-M20 TAP40ER M4-M27 TAP50ER M4-M27 TAP60ER32 VDI Keyless Drill Chuck Keyless drill chuck for CNC lathe with VDI tool turret VDI D E3 Type - For Collet DIN6388 unit:mm T1 VDI Tool Holder DIN69880 D D1 D2 D3 H L1 L E3-30-OZ E3-40-OZ E3-40-OZ E3-50-OZ E3-50-OZ32 D D1 H1 H2 H3 L1 L2 T T T T T T T A: Distance between fl ange and chuck D: Dia. of fl ange L D L φ mm 1-13 CHK30X CHK40X CHK40X CHK50X CHK50X Z2: Steel Plug (mm) d1 d3 Z Z Z Z Z Z Z Z Toolholder Blank A2 L2 d1 Z2 Z2: Plastic Plug (mm) D D1 H L Z23068.P Z24083.P d3 d1 A2: Round (mm) d1 d2 L2 A A A A A A A A A A A A A A A A A A A A80158XXX XXX A T1-ER Type D DIN D1 X T1-X3 D D1 H1 H2 H3 L1 L2 L3 L4 T1-30-3X T1-30-3x S H1 H2 H3 L1 L ER T X ER T X ER T X ER T X ER T X ER T X ER T X2 E2-X2 D D1 D1 L1 L2 L3 L4 DIN6980 inch mm E2-30-2X E2-40-2X /

92 VDI Tool Holder DIN69880 PM Collet Chuck ER Style Right Hand Peripheral Mounted VDI d1 B1 B2 B3 H1 H2 L1 L2 L3 PM3025ER PM4032ER PM Collet Chuck - Double ER Style Right Hand Peripheral Mounted VDI d1 B1 B2 B3 H1 H2 L1 L2 L3 PM3025ER-D PM4032ER-D PM Offfset ID Boring Bar Holder Right Hand Peripheral Mounted VDI d1 D2 B1 B2 B3 H1 H2 L1 L2 PM3025RL PM3025RS PM4032RL / PM4032RS / PM Offfset ID Boring Bar Holder Left Hand Peripheral Mounted VDI d1 D2 B1 B2 B3 H1 H2 L1 L2 PM3025LL PM3025LS PM4032LL / PM4032LS /

93 PM Straight ID Boring Bar Holder Left Hand Peripheral Mounted VDI VDI Tool Holder DIN69880 d1 D2 B1 B2 H1 H2 L1 L2 PM3020LL 30 3/ PM3020LS 30 3/ PM4025LL PM4025LS Bushing Morse Taper Type D1 L MT E32-MT1 E32-MT2 E32-MT3 E32-MT E40-MT1 E40-MT2 E40-MT3 E40-MT4 Bushing Type Z E50-MT1 E50-MT2 E50-MT3 E50-MT4 D2 L D1 D1 L D2 6MM 1/4 8MM 5/16 10MM 3/8 12MM 1/2 16MM 5/8 20MM 3/4 25MM 1 32MM 1-1/4 40MM 1-1/2 20MM 50MM Z /4 Z /16 Z /8 Z /2 Z /8 / / / / 3/4 25MM 50MM Z /4 Z /16 Z /8 Z /2 Z /8 Z /4 / / / 1 32MM 60MM Z /4 Z /16 Z /8 Z /2 Z /8 Z /4 Z / / 1-1/4 40MM 75MM Z /4 Z /16 Z /8 Z /2 Z /8 Z /4 Z Z /4 / 1-1/2 50MM 85MM / Z /16 Z /8 Z /2 Z /8 Z /4 Z Z /4 Z /2 2 VDI Bar Puller VDI Bar Puller to fi t your DIN VDI 30MM and 40MM Turret and allow you the fl exibility to hold a variety of shapes and Diameters of Material: Flat, Hex, Square and Round. Gripping Range: 1/8 to 3 1/8 Diameter. D A B C E BP-30 30mm 100 1/8~3-1/ BP-40 40mm 100 1/8~3-1/ Omni & Mini Omni Bar Puller Description Shank Dia. OD Length (In.) (In.) (In.) MP-001 Mini puller / / OP-1000 Omni puller / The Omni Puller is either coolant or air activated. The special adaptor can be easily removed for internally activated applications. The Omni Puller is mounted in two basic ways. Internally Activated - Applications are very common and very easy to mount. Internally activated applications require you to remove the coolant/air adaptor. You must have a minimum of 15 P.S.I. to activate the unit (maximum 80 P.S.I.). Externally Activated - Applications are commonly used with a CNC Turret boring bar holder attachment, or with another style tool holder. These holders must have coolant access ports. These ports can be connected with an external line to the threaded hole of the coolant/air adaptor (thread size 1/8-27 NPT). Your external outside coolant system must have a minimum of 15 P.S.I. to actuated the Puller (15 P.S.I. = 107 lbs. clamping force). Fingers & Finger Sets for MP-001 / OP-1000 Individual Hardened Steel 50 RC Fingers, Soft Steel Fingers, Soft Aluminum Fingers each

94 VDI Tool Holder DIN 5480 Coupling to DIN5480 SAUTER TYPE Coupling to DIN5482 SAUTER TYPE Axial Driven Tools (DIN 5480) Coupling: 5480 Machine Type VDI Turret Mfg Dia Benzinger TNI 25 Sauter Boehringer NG 180, NG Sauter Doosan S 280M 25 Sauter Doosan S 310M, S 310SM, S 310SLM 30 Sauter Doosan V 420M, V420TM, V 550M, V 550TM 50 Sauter Doosan Z 280TM 40 Sauter Doosan Z 290M, Z 290SM 30 Sauter Doosan Z 340SM 30 Sauter Doosan V 850M, V850TM 60 Sauter Emco ET 332 MC 25 Emco 332 Emco ET 365 MC 30 Emco 365 Emco ET 465 MC 30 Emco 365 Emco HT Emco 365 Emco HT Emco 690 Fortune NVTurn 26BCV, 26YCV 40 Sauter Gildemeister CTX 200 S2, V3 20 Sauter Gildemeister CTX 200 Twin 20 Sauter Gildemeister CTX 320 linear 30 Sauter Gildemeister CTX 320 linear with subspindle 30 Sauter Gildemeister CTX 400 Twin 30 Sauter Gildemeister CTX 420 linear 40 Sauter Gildemeister CTX 420 linear with subspindle 40 Sauter Machine Type VDI Turret Mfg Dia Gildemeister GMX 300, GMX 400 linear 40 Sauter Gildemeister GMX 500 linear 40 Sauter Gildemeister MF Twin 42, Sauter Gildemeister Twin Sauter Gildemeister Twin Sauter Gildemeister Twin Sauter Gildemeister Twin 50, Sauter Gildemeister Twin 65, Sauter Gildemeister Twin 65, Sauter Gildemeister Twin 500 linear 40 Sauter Gildemeister CTV 200, CTV 250 linear 40 Sauter Graziano GT 300 with subspindle 30 Sauter Graziano GT 400 with subspindle 30 Sauter Graziano GT 500 with subspindle 40 Sauter Hardinge Elite 8/51 30 Sauter Magdeburger M160U-4, M160GS-4, M160GU-4 40 Sauter Magdeburger MV Sauter Monforts DNC 3 30 Sauter Niles NF 13, NF 16, NF 20, NV Sauter Niles NF 13, NF 16, NF 20, NV Sauter Victor NVTurn 26BCV, 26YCV 40 Sauter Weiler DZ 45 with supspindle 25 Sauter Weiler DZ 67 V3 30 Sauter WFL M30 40 Sauter FORCE ONE DOUBLE SPINDLE DOUBLE TURRET 30 SUTER Axial Drilling & Milling Head w/ Collet Chuck SAUTER TYPE Applications: For Endmilling, Drilling, Reaming *With IC For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included DA K DA K DA K A1 Coupling to DA K DIN5480 DA605480xxK **IC: Internal Coolant DIN 5480 D X S MAX. i A B C P DIN69880 r.p.m. DIN5480 DA /ER : W10x0.8 DAI A /ER : W16X0.8 DAC /ER : W16X0.8 DA /ER : W16X0.8 DA /ER : W20X0.8 DA /ER : W21X1.25 DA605480xx :1 Axial Tapping Head w/ Collet Chuck Coupling to DIN1809 DUPLOMATIC TYPE Spur Coupling (IT) DUPLOMATIC TYPE Spur Coupling (MT) BARUFFALDI TOEM D X S MAX. i A B C P DIN69880 r.p.m. DIN5480 TDA /ER : W16X0.8 TDA /ER : W20X0.8 TDA /ER : W21X1.25 φvdi A φb φc Z E MT: Baruffaldi Type Frontal transmission coupling gear is fi xed TOEM TOEM TOEM250 IT: Duplomatic Type Frontal transmission coupling gear is retractable MDT MDT MDT MDT2 Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A7 DIN 5480 D X S MAX. i A B C G P DIN69880 DIN6358 r.p.m. DIN5480 DA C : W16X0.8 DA C : W20X0.8 DA C : W20X0.8 DA C : W21X1.25

95 VDI Tool Holder DIN 5480 Radial Driven Tools (DIN 5480) Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A16 DIN 5480 D X S MAX. i A B C P DIN69880 r.p.m. DIN5480 DA /ER : W16X0.8 DA /ER : W20X0.8 *** Double Speed With IC DA K DA K IC: Internal Coolant Double Torque DA /2 DA /2 Max 2000rpm Double Torque w/ic DA /2K DA /2K Max 2000rpm Double Speed DA *2 DA *2 Max 8000rpm Double Speed w/ IC DA *2K DA *2K Max 8000rpm Axial Drilling & Milling Head w/ Double Collets, Y Offset To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A19 DIN 5480 D X S MAX. i A B C E F G H P DIN69880 r.p.m. DIN5480 DA DY /ER : W16X0.8 Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R8 DIN 5480 D X S MAX. i A B C E F G M P DIN69880 r.p.m. DIN5480 BR /ER : W16X0.8 BL /ER : W16X0.8 BR /ER : W20X0.8 BL /ER : W20X0.8 With IC BR K BL K BR K BL K BR K BL K IC: Internal Coolant Double Torque BR /2 BL /2 BR /2 BL /2 BR /2 BL /2 Max 2500rpm Double Torque w/ic BR /2K BL /2K BR /2K BL /2K BR /2K BL /2K Max 2500rpm

96 VDI Tool Holder DIN 5480 Radial Tapping Backward Head R1 DIN 5480 D X S MAX. i A B C E F G M P DIN69880 r.p.m. DIN5480 TBR /ER : W10X0.8 TBL /ER : W10X0.8 TBR /ER : W16X0.8 TBL /ER : W16X0.8 TBR /ER : W20X0.8 TBL /ER : W20X0.8 Radial Driven Tools (DIN 5480) Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R12 D X S MAX. i A B C F G M P DIN69880 r.p.m. DIN5480 FR /ER :1 55 W16X0.8 FL /ER :1 55 W16X0.8 DIN 5480 FR /ER :1 85 W16X0.8 FL /ER :1 85 W16X0.8 FR /ER :1 100 W16X0.8 FL /ER :1 100 W16X0.8 FR /ER : W16X0.8 FL /ER : W16X0.8 FR /ER : W16X0.8 FL /ER : W16X0.8 FR /ER : W16X0.8 FL /ER : W16X0.8 FR /ER : W20X0.8 FL /ER : W20X0.8 FR /ER : W20X0.8 FL /ER : W20X0.8 FR /ER : W20X0.8 FL /ER : W20X0.8 With IC Double Torque Double Torque w/ic Double Speed FR K FL K FR K FL K FR K FL K FR K FL K FR K FL K FR K FL K FR K FL K IC: Internal Coolant Double Speed w/ IC FR *2K FL *2K FR *2K FL *2K FR *2K FL *2K FR *2K FL *2K Max8000rpm FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 Max 2500rpm Double Speed w/ IC FR *2K FL *2K FR *2K FL *2K FR *2K FL *2K Max8000rpm FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K Max 2500rpm FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 Max 8000rpm

97 Radial Tapping Forward Head (DIN5480) R4 DIN 5480 D DIN69880 X S MAX. r.p.m. VDI Tool Holder DIN 5480 i A B C F G M P DIN5480 TFR /ER : W16X0.8 TFL /ER : W16X0.8 TFR /ER : W16X0.8 TFL /ER : W16X0.8 TFR /ER : W16X0.8 TFL /ER : W16X0.8 TFR /ER : W20X0.8 TFL /ER : W20X0.8 TFR /ER : W20X0.8 TFL /ER : W20X0.8 TFR /ER : W20X0.8 TFL /ER : W20X0.8 Radial Drilling & Milling Head w/ Disk Cutter Unit SAUTER TYPE External coolant supply R20 Coupling to DIN5480 DIN 5480 D DIN69880 X MAX. r.p.m. i A B C E F G H K M P DIN5480 BR C/ : W16X0.8 BL C/ : W16X0.8 BR C/ : W20X0.8 BL C/ : W20X0.8 Radial Drilling & Milling Heads w/ Double Collets To be used for collet DIN 6499 External coolant supply Collet is not included R21 DIN 5480 Angular Head R22 (A20) D DIN69880 X S MAX. r.p.m. i A B C G M P DIN5480 DF D /ER : W16X0.8 DF D /ER : W20X0.8 DF D /ER : W20X0.8 To be used for collet DIN 6499 External coolant supply Collet is not included DIN 5480 D DIN69880 X MAX. r.p.m. i A B C E F G M P DIN5480 DA B /ER :1 ± W16X0.8 DA B /ER :1 ± W20X0.8

98 VDI Tool Holder DIN 5482 Axial Driven Tools (DIN 5482) Coupling: 5482 Machine Type VDI dia Turret Mfg Coupling: 5482 Machine Type VDI dia Turret Mfg Colchester Storm II 120M, Tornado 120M 30 Sauter Magdeburger M Sauter Colchester Storm II 220M, Tornado 220M 40 Sauter Magdeburger M Sauter Doosan S 390LM 40 Sauter Monforts RNC 3, RNC 200, RNC Sauter Emco ET 360 MC 30 Sauter Monforts RNC 4, RNC 5, RNC 400, RNC 500, RNC Sauter Fortune VTurn 36CV, 46CV 50 Sauter Monforts RNC 7, RNC 700, RNC Sauter Gildemeister CTX 300, CTX Sauter Niles N Sauter Gildemeister CTX 400 S2, E 30 Sauter Niles N Sauter Gildemeister CTX 500 S2, E 40 Sauter Niles N Sauter Gildemeister CTX 600 S2, E 50 Sauter Niles N Sauter Gital GT Sauter Niles N Sauter Graziano GT Sauter Niles N 40, N50 60 Sauter Graziano GT 400, GT Sauter Spinner TC 65-MC 30 Sauter Graziano GT Sauter Traub TNA Sauter Heyligenstaedt Heynumat 5 40 Sauter Traub TNA Sauter Heyligenstaedt Heynumat Sauter Victor VTurn 36CV, 46CV 50 Sauter Heyligenstaedt Heynumat 20, 21, 24, Sauter Weiler DZ Sauter Magdeburger M Sauter Weiler DZ 67 V1, V2 30 Sauter Magdeburger M Sauter WFL M30 40 Sauter Magdeburger M160U-2 40 Sauter WFL M40, M60 50 Sauter Magdeburger M Sauter Axial Drilling & Milling Head w/ Collet Chuck SAUTER TYPE Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A2 Coupling to DIN5482 DIN 5482 With IC DA K DA K DA K DA K DA K IC: Internal Coolant Axial Tapping Head w/ Collet Chuck A11 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C E F P DIN5482 DA DA /ER : B15X12 DA /ER : B17X14 DA /ER : B20X17 DA /ER : B25X22 D DIN69880 X S MAX. r.p.m. i A B C E F P DIN5482 TDA /ER : B15X12 TDA /ER : B17X14 TDA /ER : B20X17 TDA /ER : B25X22 Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A8 DIN 5482 D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G P DIN5482 DA C : B15X12 DA C : B17X14 DA C : B17X14 DA C : B20X17 DA C : B20X17

99 VDI Tool Holder DIN 5482 Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A17 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C P DIN5482 DA /ER : B15X12 DA /ER : B17X14 DA /ER : B20X17 DA /ER : B25X22 DA /ER : B25X22 *** Double Speed With IC DA K DA K DA K IC: Internal Coolant Double Torque DA /2 DA /2 DA /2 Max 2000rpm Double Torque w/ic DA /2K DA /2K DA /2K Max2000rpm Double Speed DA *2 DA *2 DA *2 Max 8000rpm Double Speed w/ IC DA *2K DA *2K DA *2K Max8000rpm Radial Driven Tools (DIN 5482) Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R9 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C E F G M P DIN5482 BR /ER : B15X12 BL /ER : B15X12 BR /ER : B17X14 BL /ER : B17X14 BR /ER : B20X17 BL /ER : B20X17 BR /ER : B25X22 BL /ER : B25X22 With IC Double Torque Double Torque w/ic BR K BL K BR K BL K BR K BL K BR K BL K IC: Internal Coolant BR /2 BL /2 BR /2 BL /2 BR /2 BL /2 BR /2 BL /2 Max 2000rpm BR /2K BL /2K BR /2K BL /2K BR /2K BL /2K BR /2K BL /2K Max2000rpm

100 VDI Tool Holder DIN 5482 Radial Driven Tools (DIN 5482) Radial Tapping Backward Head R2 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C E F G M P DIN5482 TBR /ER : B15X12 TBL /ER : B15X12 TBR /ER : B17X14 TBL /ER : B17X14 TBR /ER : B20X17 TBL /ER : B20X17 TBR /ER : B25X22 TBL /ER : B25X22 Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R13 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C F G M P DIN5482 FR /ER : B15X12 FL /ER : B15X12 FR /ER : B15X12 FL /ER : B15X12 FR /ER : B20X17 FL /ER : B20X17 FR /ER : B20X17 FL /ER : B20X17 FR /RT : B25X22 FL /RT : B25X22 With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC FR K FL K FR K FL K FR K FL K FR K FL K FR K FL K IC: Internal Coolant FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 Max 2500rpm FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K Max2500rpm FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 Max 8000rpm FR *2K FL *2K FR *2K FL *2K FR *2K FL *2K FR *2K FL *2K FR *2K FL *2K Max8000rpm

101 VDI Tool Holder DIN 5482 Radial Tapping Forward Head R5 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C F G M P DIN5482 TFR /ER : B15X12 TFL /ER : B15X12 TFR /ER : B15X12 TFL /ER : B15X12 TFR /ER : B20X17 TFL /ER : B20X17 TFR /ER : B20X17 TFL /ER : B20X17 TFR /ER : B25X22 TFL /ER : B25X22 Radial Driven Tools (DIN 5482) Radial Drilling & Milling Head w/ Disk Cutter Unit SAUTER TYPE External coolant supply R23 Coupling to DIN5482 DIN 5482 D DIN69880 X MAX. r.p.m. i A B C E F G H K M P DIN5482 BR C* : B15X12 BL C* : B15X12 BR C* : B17X14 BL C* : B17X14 Angular Head To be used for collet DIN 6499 External coolant supply Collet is not included R24 (A21) DIN 5482 D DIN69880 X MAX. r.p.m. i A B C E F G M P DIN5482 DA B /ER :1 ± B15X12 DA B /ER :1 ± B17X14

102 VDI Tool Holder DIN 1809 Axial Driven Tools (DIN 1809) Coupling: 1809 Machine Type VDI dia Turret Mfg Machine Type VDI dia Turret Mfg Cincinnati Hawk TC-150M 30 Duplomatic Emco ET 900 MC 60 Duplomatic Cincinnati Hawk TC-200M, TC-250M 40 Duplomatic Femco HL-25 (12 tools) 30 Duplomatic Daewoo Puma 200M 30 Duplomatic** Focus FCL-300MC (SMH-DT /0-12-P/23) 40 Duplomatic Daewoo Puma 250M 40 Duplomatic** Fortune VTurn 16CV, 20CV, VTurn II 20YBCV 30 Duplomatic Daewoo Puma 350M 50 Duplomatic** Fortune VTurn 26CV, Vturn II 26CV 40 Duplomatic Emag VSC 160, VSC 200, VSC 250, VL2, VL3, VL5 40 Emag Hyundai HiT-160M 30 Duplomatic Emag VSC 315, VSC 400, VSC Emag Hyundai HiT-200M, 250M 40 Duplomatic Emco ET 342 MC 20 Duplomatic Leadwell T-8M (12 tools) 40 Emco ET 345 II, ET 400 MC 30 Duplomatic Tornos 80-CCN R-TM, 180-CCN R-TM 30 Duplomatic Emco ET 500 MC 40 Duplomatic Victor VTurn 16CV, 20CV 30 Duplomatic Emco ET 700 MC, ET 800 MC 50 Duplomatic Victor VTurn 26CV 40 Duplomatic Axial Drilling & Milling Head w/ Collet Chuck Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A3 DIN 1809 D DIN69880 *With IC DA K DA K DA K DA K DA K **IC: Internal Coolant X S MAX. r.p.m. i A B C DA /ER : DA /ER : DA /ER : DA /ER : DA /ER : DUPLOMATIC TYPE Coupling to DIN1809 Axial Tapping Head w/ Collet Chuck A12 DIN 1809 D DIN69880 X S MAX. r.p.m. i A B C TDA /ER : TDA /ER : TDA /ER : TDA /ER : Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A14 DIN 1809 D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G DA C : DA C : DA C : DA C : DA C :

103 VDI Tool Holder DIN 1809 Radial Driven Tools (DIN 1809) Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included D DIN69880 A18 DIN 1809 X S MAX. r.p.m. i A B C DA /ER : DA /ER : DA /ER : DA /ER : DA /ER : DA /ER : With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC DA K DA /2 DA /2K DA *2 DA *2K DA K DA /2 DA /2K DA *2 DA *2K DA K DA /2 DA /2K DA *2 DA *2K DA K IC: Internal Coolant DA /2 Max 2000rpm DA /2K Max2000rpm DA *2 Max 8000rpm DA *2K Max8000rpm Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R10 DIN 1809 D DIN69880 X S MAX. r.p.m. i A B C E F G M BR /ER : BL /ER : BR /ER : BL /ER : BR /ER : BL /ER : BR /ER : BL /ER : BR /ER : BL /ER : With IC Double Torque Double Torque w/ic BR K BL K BR K BL K BR K BL K BR K BL K BR K BL K IC: Internal Coolant BR /2 BL /2 BR /2 BL /2 BR /2 BL /2 BR /2 BL /2 BR /2 BL /2 Max 2000rpm BR /2K BL /2K BR /2K BL /2K BR /2K BL /2K BR /2K BL /2K BR /2K BL /2K Max2000rpm

104 VDI Tool Holder DIN 1809 Radial Driven Tools (DIN 1809) R3 DIN 1809 D DIN69880 X Radial Tapping Backward Head S MAX. r.p.m. i A B C E F G M TBR /ER : TBL /ER : TBR /ER : TBL /ER : TBR /ER : TBL /ER : TBR /ER : TBL /ER : Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R14 DIN 1809 D DIN69880 X S MAX. r.p.m. i A B C F G M FR /ER : FL /ER : FR /ER : FL /ER : FR /ER : FL /ER : FR /ER : FL /ER : FR /RT : FL /RT : With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC FR K FL K FR K FL K FR K FL K IC: Internal Coolant FR /2 FL /2 FR /2 FL /2 FR /2 FL /2 Max 2500rpm FR /2K FL /2K FR /2K FL /2K FR /2K FL /2K Max2500rpm FR *2 FL *2 FR *2 FL *2 FR *2 FL *2 Max 8000rpm FR *2K FL *2K FR *2K FL *2K FR *2K FL *2K Max 8000rpm Radial Tapping Forward Head R6 D DIN69880 DIN 1809 X S MAX. r.p.m. i A B C F G M TFR /ER : TFL /ER : TFR /ER : TFL /ER : TFR /ER : TFL /ER : *** Unit: mm ***Double Torque, Double Speed and Internal Coolant are also available.

105 VDI Tool Holder Spur Coupling IT Radial Drilling & Milling Head w/ Disk Cutter Unit External coolant supply R25 (A25) DUPLOMATIC TYPE DIN 1809 D DIN69880 X (mm) MAX. r.p.m. Coupling to DIN1809 i A B C E F G H K M BR C* : BL C* : BR C* : BL C* : Angular Head R26 (A22) To be used for collet DIN 6499 External coolant supply Collet is not included DIN 1809 D DIN69880 X MAX. r.p.m. S i A B C E F G M DA B /ER :1 ± DA B /ER :1 ± Axial Driven Tools (Spur Coupling IT) DUPLOMATIC Turret Coupling: IT Machine Type VDI dia Turret Mfg Matech MT-52S (12 tools) 30 Duplomatic Matech MT-52SM (12 tools) 30 Duplomatic Matech MT-75S (SM-P-20-PA-12/20) 40 Duplomatic Poly Gim Diamond Duplomatic Axial Drilling & Milling Head w/ Collet Chuck Spur Coupling (IT) DUPLOMATIC TYPE Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A4 IT Spur Coupling With IC DA30IT25K DA40IT32K DA50IT40K IC: Internal Coolant D DIN69880 X S MAX. r.p.m. i A B C DA30IT /ER : DA40IT /ER : DA50IT /ER : Axial Tapping Head w/ Collet Chuck A13 IT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C E F TDA30IT /ER : TDA40IT /ER : TDA50IT /ER :

106 VDI Tool Holder Spur Coupling IT Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A23 IT Spur Coupling D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G DA30IT16C : DA40IT16C : DA40IT22C : DA50IT22C : DA50IT27C : Angular Head R27 (A24) To be used for collet DIN 6499 External coolant supply Collet is not included IT Spur Coupling D DIN69880 X MAX. r.p.m. S i A B C E F G M DA30IT20B /ER :1 ± DA40IT25B /ER :1 ± Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R15 IT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M FR30IT /ER : FL30IT /ER : FR30IT /ER : FL30IT /ER : FR40IT /ER : FL40IT /ER : FR40IT /ER : FL40IT /ER : FR40IT /ER : FL40IT /ER : FR50IT /RT : FL50IT /RT :

107 Radial Driven Tools Spur Coupling IT DUPLOMATIC Turret VDI Tool Holder Spur Coupling IT With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC FR30IT2565K FR30IT2565/2 FR30IT2565/2K FR30IT2565*2 FR30IT2565*2K FL30IT2565K FL30IT2565/2 FL30IT2565/2K FL30IT2565*2 FL30IT2565*2K FR30IT2585K FR30IT2585/2 FR30IT2585/2K FR30IT2585*2 FR30IT2585*2K FL30IT2585K FL30IT2585/2 FL30IT2585/2K FL30IT2585*2 FL30IT2585*2K FR40IT3265K FR40IT3265/2 FR40IT3265/2K FR40IT3265*2 FR40IT3265*2K FL40IT3265K FL40IT3265/2 FL40IT3265/2K FL40IT3265*2 FL40IT3265*2K FR40IT3285K FR40IT3285/2 FR40IT3285/2K FR40IT3285*2 FR40IT3285*2K FL40IT3285K FL40IT3285/2 FL40IT3285/2K FL40IT3285*2 FL40IT3285*2K FR40IT32100K FR40IT32100/2 FR40IT32100/2K FR40IT32100*2 FR40IT32100*2K FL40IT32100K FL40IT32100/2 FL40IT32100/2K FL40IT32100*2 FL40IT32100*2K FR50IT4075K FR50IT4075/2 FR50IT4075/2K FR50IT4075*2 FR50IT4075*2K FL50IT4075K IC: Internal Coolant FL50IT4075/2 Max 15000rpm FL50IT4075/2K Max15000rpm FL50IT4075*2 Max 6000rpm FL50IT4075*2K Max6000rpm Radial Tapping Forward Head R7 IT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M TFR30IT /ER : TFL30IT /ER : TFR30IT /ER : TFL30IT /ER : TFR40IT /ER : TFL40IT /ER : TFR40IT /ER : TFL40IT /ER : TFR50IT /ER : TFL50IT /ER : Radial Drilling & Milling Heads w/ Double Collets To be used for collet DIN 6499 External coolant supply Collet is not included R28 IT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C G M DF30IT2585D /ER : DF40IT3285D /ER : DF40IT32100D /ER :

108 VDI Tool Holder Spur Coupling MT Axial Driven Tools Spur Coupling MT Brauffaldi Turret Coupling: MT Machine Type VDI dia Turret Mfg Femco HL Baruffaldi Spinner TC 46-MC 30 Baruffaldi Spinner TC 67L-MC 30 Baruffaldi Traub TND Baruffaldi Coupling: MT Machine Type VDI dia Turret Mfg Femco HL-35, HL Baruffaldi Spinner TC 67H-MC 40 Baruffaldi Spinner TC 82-MC, TC 108-MC 50 Baruffaldi Axial Drilling & Milling Head w/ Collet Chuck Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A25 Spur Coupling (MT) BARUFFALDI TYPE MT Spur Coupling With IC DA20MT20K DA30MT25K DA40MT32K DA50MT40K IC: Internal Coolant D DIN69880 X S MAX. r.p.m. i A B C DA20MT /ER : DA30MT /ER : DA40MT /ER : DA50MT /ER : DA60MT /ER : Axial Tapping Head w/ Collet Chuck A26 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C TDA30MT /ER : TDA40MT /ER : TDA50MT /ER : Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A15 MT Spur Coupling D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G DA30MT16C : DA40MT16C : DA40MT22C : DA50MT22C : DA50MT27C :

109 Radial Driven Tools Spur Coupling MT Brauffaldi Turret VDI Tool Holder Spur Coupling MT Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A27 MT Spur Coupling With IC DA20MT1629K DA30MT2529K DA40MT3250K DA50MT4065K DA60MT5065K DA60MT5080K IC: Internal Coolant D DIN69880 X S MAX. r.p.m. i A B C DA20MT /ER : DA30MT /ER : DA40MT /ER : DA50MT /ER : DA60MT /ER : DA60MT /ER : *** Double Speed Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R18 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C E F G M BR20MT /ER : BL20MT /ER : BR30MT /ER : BL30MT /ER : BR40MT /ER : BL40MT /ER : BR50MT /ER : BL50MT /ER : BR60MT /ER : BL60MT /ER : With IC Double Torque Double Torque w/ic BR20MT1660K BR20MT1660/2 BR20MT1660/2K BL20MT1660K BL20MT1660/2 BL20MT1660/2K BR30MT2569K BR30MT2569/2 BR30MT2569/2K BL30MT2569K BL30MT2569/2 BL30MT2569/2K BR40MT3290K BR40MT3290/2 BR40MT3290/2K BL40MT3290K BL40MT3290/2 BL40MT3290/2K BR50MT4090K BR50MT4090/2 BR50MT4090/2K BL50MT4090K BL50MT4090/2 BL50MT4090/2K BR60MT50102K BR60MT50102/2 BR60MT50102/2K BL60MT50102K IC: Internal Coolant BL60MT50102/2 Max 2500rpm BL60MT50102/2K Max2500rpm

110 VDI Tool Holder Spur Coupling MT Radial Tapping Backward Head R16 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C E F G M TBR30MT /ER : TBL30MT /ER : TBR40MT /ER : TBL40MT /ER : TBR50MT /ER : TBL50MT /ER : TBR60MT /ER : TBL60MT /ER : Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R19 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M FR20MT /ER : FL20MT /ER : FR30MT /ER : FL30MT /ER : FR30MT /ER : FL30MT /ER : FR40MT /ER : FL40MT /ER : FR40MT /ER : FL40MT /ER : FR40MT /ER : FL40MT /ER : FR50MT /RT : FL50MT /RT : *With IC *Double Torque *Double Torque w/ic *Double Speed *Double Speed w/ IC FR20MT2045K FL20MT2045K FR30MT2565K FL30MT2565K FR30MT2585K FL30MT2585K FR40MT3265K FL40MT3265K FR40MT3285K FL40MT3285K FR40MT32100K FL40MT32100K FR50MT4075K FL50MT4075K **IC: Internal Coolant FR20MT2045/2 FL20MT2045/2 FR30MT2565/2 FL30MT2565/2 FR30MT2585/2 FL30MT2585/2 FR40MT3265/2 FL40MT3265/2 FR40MT3285/2 FL40MT3285/2 FR40MT32100/2 FL40MT32100/2 FR50MT4075/2 FL50MT4075/2 **Max 2500rpm FR20MT2045/2K FL20MT2045/2K FR30MT2565/2K FL30MT2565/2K FR30MT2585/2K FL30MT2585/2K FR40MT3265/2K FL40MT3265/2K FR40MT3285/2K FL40MT3285/2K FR40MT32100/2K FL40MT32100/2K FR50MT4075/2K FL50MT4075/2K **Max2500rpm FR20MT2045*2 FL20MT2045*2 FR30MT2565*2 FL30MT2565*2 FR30MT2585*2 FL30MT2585*2 FR40MT3265*2 FL40MT3265*2 FR40MT3285*2 FL40MT3285*2 FR40MT32100*2 FL40MT32100*2 FR50MT4075*2 FL50MT4075*2 **Max 8000rpm FR20MT2045*2K FL20MT2045*2K FR30MT2565*2K FL30MT2565*2K FR30MT2585*2K FL30MT2585*2K FR40MT3265*2K FL40MT3265*2K FR40MT3285*2K FL40MT3285*2K FR40MT32100*2K FL40MT32100*2K FR50MT4075*2K FL50MT4075*2K **Max 8000rpm

111 VDI Tool Holder Spur Coupling MT Radial Driven Tools Spur Coupling MT Brauffaldi Turret Radial Tapping Forward Head R17 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M TFR3MIT /ER : TFL30MT /ER : TFR30MT /ER : TFL30MT /ER : TFR40MT /ER : TFL40MT /ER : TFR40MT /ER : TFL40MT /ER : TFR50MT /ER : TFL50MT /ER : Radial Drilling & Milling Head w/ Disk Cutter Unit External coolant supply R29 Spur Coupling (MT) BARUFFALDI TYPE MT Spur Coupling D DIN69880 X MAX. r.p.m. i A B C E F G H K M BR30MT16C/ : BL30MT16C/ : BR40MT16C/ : BL40MT16C/ : Radial Drilling & Milling Heads w/ Double Collets To be used for collet DIN 6499 External coolant supply Collet is not included R30 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C G M DF30MT2585D /ER : DF40MT3285D /ER : DF40MT32100D /ER :

112 VDI Tool Holder Spur Coupling MT Angular Head To be used for collet DIN 6499 External coolant supply Collet is not included R31 (A28) MT Spur Coupling D DIN69880 X MAX. r.p.m. i A B C E F G M DA30MT20B /ER :1 ± DA40MT25B /ER :1 ± Radial Driven Tools - HAAS Radial Drilling & Milling Head Machine D X S MAX. r.p.m. A B C G M E VDI40FL SL-20/TL / ER VD/BOTFL SL-30/TL / ER VDI40FL SL / ER VD/BOTFL SL / ER Axial Driven Tools - HAAS Axial Drilling & Milling Head Machine D X S MAX. r.p.m. A B C E VDI40DA SL-20/TL / ER VD/BOTDA SL-30/TL / ER DA40HS SL-40/ST-20, / ER VD/BOTDA SL / ER

113 VDI Tool Holder Mazak VDI Tool Holder MK Series For V Type Holder MK1 MULTIPLEX SUPER QUICK TURN MAZAK MK1 MP410N-12D, 415N-12D MP610-12D, D, D MP420N-12D, 620N-12D MP620-12D, D 6MP420N-12D, 620N-12D MP620-12D, D MULTIPLEX D, D, 430 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D QTN 100M-12X 200M/MS-12X 250M/MS-16X Machine MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 MULTIPLEX 630/6300 NEXUS QTNX 100/ 100-II + SQT10 Max rpm 5000 A B C D Tool System Collet DIN mm 110mm 68mm 76mm ER MM ( ) ER-25 1/8-5/ mm 110mm 70mm 80mm ER MM ( ) ER-25 1/8-5/ mm 110mm 70mm 80mm ER MM ER-32 1/8-3/ mm 132mm 75mm 96mm ER MM ER-32 1/8-3/ mm 110mm 68mm 76mm ER MM ER-25 1/8-5/8 MK2 MK3 V Type Holder SUPER QUICK TURN MAZAK MK2 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12X 18M/MS-12X 200M/MS-12X 250M/MS-12X SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X V Type Holder MULTIPLEX MAZAK MK3 SUPER QUICK TURN MP410N-12D, 415N-12D MP610-12D, D, D MP420N-12D, 620N-12D MP620-12D, D MP420N-12D, 620N-12D MP620-12D, D SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D QTN 100M-12X 200M/MS-12X 250M/MS-16X QTNX 200M/MS-12X 250M/MS-12X QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 200M/MS-12D 250M/MS-12D Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Machine MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTNX 200/250 + SQT15/18 Max. rpm 5000 A B C D Tool System Collet DIN mm 96mm 68mm 76mm ER MM ( ) ER-25 1/8-5/ ( ) *** (1:2) 7000 rpm Max. rpm ( ) B C D Tool System Collet DIN mm mm mm mm mm L 50mm mm mm mm 2.76 *** Double Torque/ Double Speed are also available 110mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 3.15 ER MM ER-25 1/8-5/8 ER MM ER-25 1/8-5/8 ER MM ER-25 1/8-5/8 ER MM ER-32 1/8-3/4 ER MM ER-32 1/8-3/4 ER MM ER-25 1/8-5/8 ER MM ER-32 1/8-3/4 ER MM ER-32 1/8-3/4 ER MM ER-32 1/8-3/4 ER MM ER-32 1/8-3/4 *** Double Torque/ Double Speed are also available MK4 MULTIPLEX SUPER QUICK TURN V Type Holder MAZAK MK4 MULTIPLEX 6100, 6150,610,615,410,415 MULTIPLEX 620,625,420,425 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D Machine MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Max. rpm mm mm ( ) mm 2.76 A B C D Tool system Collet DIN mm 61mm 76mm ER MM ER-25 1/8-5/8 90mm 78mm 80mm ER MM ER-25 1/8-5/8 90mm 90mm 61mm 76mm ER MM ER-25 1/8-5/8 90mm mm mm 3.15 ER MM *** Double Torque/ Double Speed are also available

114 VDI Tool Holder Mazak MK5 MULTIPLEX H Type Holder MAZAK MK5 MP410N-12D, 415N-12D MP610-12D, D, D MP420N-12D, 620N-12D MP620-12D, D MULTIPLEX X, X, 430 Machine MULTIPLEX 610/6100/6200 MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 MULTIPLEX 630/6300 Max rpm: 5000 A B C D Tool System Collet DIN mm 80mm 68mm 76mm ER MM ( ) ER25 1/8-5/ mm 80mm 68mm 76mm ER MM ER32 1/8-3/ mm 80mm 70mm 80mm ER MM ( ) ER25 1/8-5/ mm 80mm 70mm 80mm ER MM ER32 1/8-3/ mm 80mm 70mm 80mm ER MM (1:2) 7000RPM ER32 1/8-3/ mm 75mm 96mm ( ) *** Double Torque/ Double Speed are also available MK6 MK7 SUPER QUICK TURN SUPER QUICK TURN H Type Holder MAZAK MK6 SQT 10M/MS M/MS -12D 15AM/M/MS- 16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12X 18M/MS-12X 200M/MS-12X 250M/MS-12X SQT QTNX 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTN 100M-12X 200M/MS-12X 250M/MS-16X QTNX 200M/MS-12X 250M/MS-12X 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X H Type Back Holder MAZAK MK7 SQT QTN 10M/MS M-12D 100M/MS -12D 200M/MS-12D 15AM/M/MS-16D 250M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Max rpm 5000 A B C D Tool System Collet DIN mm 80mm 68mm 76mm ER MM ( ) ER25 1/8-5/ mm ( ) 130mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 3.78 ER MM ER32 1/8-3/4 ER MM ER25 1/8-5/8 ER MM ER32 1/8-3/4 ER MM ER32 1/8-3/4 *** Double Torque/ Double Speed are also available A B C E M Tool System Collet DIN ( ) 119mm mm ( ) 162mm mm mm 6.38 NEXUS QTN /350/400/450 ( ) + SQT28/30 197mm mm mm mm mm mm mm mm mm mm mm mm mm mm 0.96 mm 22.5mm mm mm mm mm mm mm mm mm mm 6.30 ER MM ER25 1/8-5/8 ER MM ER32 1/8-3/4 ER MM ER25 1/8-5/8 ER MM ER32 1/8-3/4 ER MM ER32 1/8-3/4 ER MM ER32 1/8-3/4 *** Double Torque/ Double Speed are also available Tap Holder MK8 MULTIPLEX SUPER QUICK TURN MAZAK MK8 MULTIPLEX 6100, ,615,410,415 MULTIPLEX 620,625,420,425 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 18MS, 18MS-Y QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D Machine MULTIPLEX 610/6100/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 A B C D Tool System mm mm mm mm mm mm mm mm mm mm mm mm mm 2.40 mm 78mm mm mm mm mm mm 3.15 ER20 M4-M12 No8. UNC-1/2 UNC ER20 M4-M12 No8. UNC-1/2 UNC ER20 M4-M12 No8. UNC-1/2 UNC ER ER20 M4-M12 No8. UNC-1/2 UNC

115 VDI Tool Holder Mazak VDI Tool Holder MK Series For MK9 MULTIPLEX SUPER QUICK TURN Tap Holder MAZAK MK9 MP410N-12D, 415N-12D MP610-12D, D, D MP420N-12D, 620N-12D MP620-12D, D MULTIPLEX D, D, 430 Machine MAX rpm 4000 MULTIPLEX /6100/6200 ( ) MULTIPLEX 620/6200 MULTIPLEX 630/ ( ) A B C D Tool System Collet DIN mm 110mm 68mm 76mm ER20 M4-M No8. UNC-1/2 50mm mm mm mm mm mm mm mm 3.78 ER20 M4-M12 No8. UNC-1/2 ER20 M4-M12 No8. UNC-1/2 *** Double Torque/ Double Speed are also available MK10 SUPER QUICK TURN Tap Holder MAZAK MK10 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Max rpm ( ) ( ) A B C D Tool system 50mm mm mm mm mm mm mm mm mm mm mm mm 3.78 ER-20 M4-M12 No.8 UNC-1/2 ER-20 M4-M12 No.8 UNC-1/2 ER-20 M4-M12 No.8 UNC-1/2 *** Double Torque/ Double Speed are also available MK12 SUPER QUICK TURN H Type Tap Holder MAZAK MK12 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Max rpm ( ) ( ) A B C D Tool System Collet DIN mm 96mm 68mm 76mm ER20 M4-M No8. UNC-1/2 50mm mm mm mm mm mm mm mm 3.78 ER20 M4-M12 No8. UNC-1/2 ER20 M4-M12 No8. UNC-1/2 *** Double Torque/ Double Speed are also available MK13 SUPER QUICK TURN H Type Tap Holder MAZAK MK13 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Max rpm ( ) ( ) A B C D Tool System Collet DIN mm 47mm 68mm 76mm ER20 M4-M No8. UNC-1/2 125mm mm mm mm mm mm mm mm 3.78 ER20 M4-M12 No8. UNC-1/2 ER20 M4-M12 No8. UNC-1/2 *** Double Torque/ Double Speed are also available

116 VDI Tool Holder Mazak VDI Tool Holder MK Series For V Type Polygon Holder MK15 MULTIPLEX MAZAK MK15 Machine MULTIPLEX 610, 615, 6100, 6150 MULTIPLEX 610/6100/6200 B C d D H mm mm mm 7/8 50mm 2 46mm 1.81 MULTIPLEX 6200, mm mm mm 7/8 50mm 2 46mm 1.81 *** Double Torque/ Double Speed are also available MK16 SUPER QUICK TURN V Type Polygon Holder MAZAK MK16 SQT 200, 250 SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTN 300/350/400/450 + SQT28/30 A B C d D H mm mm mm 90mm mm 109.5mm mm mm 7/8 50mm 2 46mm mm 22mm 50mm 46mm / mm 22mm 50mm 46mm / *** Double Torque/ Double Speed are also available H Type Double Collet Holder MK17, 18 MAZAK MK17,18 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Max rpm D X S A B C C1 E E1 M 4000 mm ST-ER35 42mm mm 75 mm 103 mm 77.5 mm 37 mm 16 mm 100 mm 2nd-ER20 35mm ER32 42 mm mm mm mm mm mm mm mm 5.12 Face Mill Holder MULTIPLEX SUPER QUICK TURN MK19 DIN MAZAK MK19 MP410N-12D, 415N-12D MP610-12D, D, D,6150,615,6150 MULTIPLEX 6200, 6250 SQT 10M/MS M/MS -12D 15AM/M/MS-16D 200M/MS-16D, 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D, 250M/MS-12D QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D Machine MULTIPLEX 610/6100/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Tool System: DIN-6366 B C C1 D D1 D2 E F G H ( ) 110mm mm mm mm *** Double Torque/ Double Speed are also available

117 VDI Tool Holder MK Series For VDI Tool Holder Mazak Saw Arbor Mount V Type Holder for MAZAK 6200Y Insert Mount V Type Holder for MAZAK 6200-Y, 6200, Turning Toolholder for MAZAK For Mazak Integrex 50Y and 70 Y Machines MC1 MC3 MC1/MC3: Right-Hand (Top)/Right-Hand Inverted (Bottom) d1 b4 b5 b6 h1 h6 h7 L1 L2 RH RH Inverted (inch) MC15025 MC MC16032 MC / For Mazak Integrex 50Y and 70 Y Machines MC2 MC4 MC2/MC4: Left-Hand (Top) /Left-Hand Inverted (Bottlm) d1 b4 b5 b6 h1 h6 h7 L1 L2 LH LH Inverted (inch) MC25025 MC MC26032 MC / Collet Chuck for MAZAK ME3 Boring Bar Holder for MAZAK ME4 ME3: ER32/TG100 UNIT: MM d1 Collet d2 d6 d10 L3 L9 ME350ER32 50 ER32 2~ ME360ER32 60 ER32 2~ ME350TG TG 2~ ME360TG TG 2~ ME4: Single External Coolant Flow d1 d2 d6 d8 L3 L6 L7 ME ME UNIT:MM

118 VDI Tool Holder Mazak VDI Tool Holder For SQT CNC Lathe A B C D E F G H Forward Turn Reverse Turn Boring Bar DESCRIPTION QT8 8D QT8 12D Facing Holder (right-hand) QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position U-Drill Holder QT40 12D-24 Position QT200C 12D QT250 12D QTN150 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 Cut Off Holder (right-hand) SQT15 SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS Double Turn SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 Double Boring Bar MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D MULTIPLEX 630/430 MULTIPLEX Boring Bar Holder V Boring Bar Holder (0.750 )/ 110-BOH* V Boring Bar Holder (1.000 ).. V Boring Bar Holder (1.000 ).. V Boring Bar Holder (1.000 ) V Boring Bar Holder (1.000 ) V Boring Bar Holder (1.250 ) V V Boring Bar Holder (1.250 ) V Boring Bar Holder (1.250 ) V Boring Bar Holder (1.250 )/ 630-BOH50* V Boring Bar Holder (1.250 )/ 128-SBH50 V Boring Bar Holder (1.500 ) V Boring Bar Holder (1.500 ) V V Boring Bar Holder (1.500 ) V V Boring Bar Holder (1.500 ) V V V Boring Bar Holder (1.500 ) V Boring Bar Holder (1.500 ) V Boring Bar Holder (1.500 ) V Boring Bar Holder (1.500 )/ 115-BOH40 V MZK8211 Boring Bar Holder (1.500 )Thru Coolant V V V Boring Bar Holder (1-1/4 ) V V V Boring Bar Holder (1-1/4 )/ 110-BOH40 V Boring Bar Holder (2.000 ) V V V Boring Bar holder (2.000 ) V V V V Boring Bar Holder (2.000 ) V Boring Bar Holder (2.000 )/ 630-BOH50 V Boring Bar Holder (2.000 )/128-BOH50 V V V V MZK8007B Boring Bar Holder (2.000 ) V / Boring Bar Holder (2.000 ) Split (Hinge Type) V V MZK8654 MZK8659 Boring Bar Holder (2.000 ) Split (Hinge Type) MZK8660 Boring Bar Holder (2.000 ) Split (Cap Type) MZK8768 Boring Bar Holder (2.500 ) MZK8928 Boring Bar Holder (2.500 ) Split (Hinge Type) V Cut Off Holder V V V V Cut Off Holder V V V Cut Off Holder/ 620-COH40 V V Cut Off Holder/ 630-COH50 V Cut Off Holder/ 110-COH40 V V V V Cut Off Holder/ 115-COH40 V V V Cut Off Holder/ 128-COH50 V V V V Cut Off Holder (Z Offset)/ 610-COH40* V V Cut Off Holder (Z Offset)/ 620-COH40* V Double Boring Bar Holder (1.0 )/ 115-SBH40 V V V Double Turn Holder/128-DTH50 V V V Double Turning Holder/ 110-DTH40 V V V V Double Turning Holder/ 115-DTH40 V V V V Facing Holder Facing Holder Facing Holder V V V Facing Holder V Facing Holder V V Facing Holder V Facing Holder V V V Facing Holder V Facing Holder V V V V V V Facing Holder V Facing Holder V Facing Holder V Facing Holder/ 610-FAH40 V Facing Holder/ 620-FAH40 V Facing Holder/ 630-FAH50 V Facing Holder/110-FAH40 V V V V Facing Holder V V Facing Holder V Facing Holder/ 115-FAH40 V V V Facing Holder V Facing Holder V Facing Holder.../ 128-FAH50 V V V

119 VDI Tool Holder For SQT CNC Lathe VDI Tool Holder Mazak DESCRIPTION QT8 8D QT8 12D QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position QT40 12D-24 Position QT200C 12D QT250 12D QTN150 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 SQT15 SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D MULTIPLEX 630/430 MULTIPLEX Forward Turn Holder/ 128-FTH50 V V V Forward Turning Holder V Forward Turning Holder V V V Forward Turning Holder V V V V V Forward Turning Holder V Forward Turning Holder V Forward Turning Holder V V V Forward Turning Holder/ 620-FTH40 V V Forward Turning Holder/ 630-FTH50 V Forward Turning Holder/ 110-FTH40 V V V V Forward Turning Holder/ 115 FTH40 V V V Forward Turning Holder V Fwd Turning Holder V Fwd/Rev Turning Holder V EOOP- Nozzles V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V BA6E Offset Boring Bar Holder V V V Offset Boring Bar Holder V Offset Boring Bar Holder (1.250 ) V V Turning Holder (Optional) V PDT-MP1-H PDT-MP1-H..H-Type Mill/Drill Unit V V PDT-MP1-V PDT-MP1-V..V-Type Mill/Drill Unit V V PDT-MP2-H PDT-MP2-H..H-Type Mill/Drill Unit V V PDT-MP2- HTC PDT-MP2-HTC..H-Type Mill/Drill Unit.. Through Coolant V V PDT-MP2-V PDT-MP2-V..V-Type Mill/Drill Unit V V PDT-MP2- PDT-MP2-VTC..V-Type Mill/Drill Unit..Through V V VTC Coolant PDT-MP3-H PDT-MP3-H..H Type Mill/Drill Unit V V PDT-MP3- ER40 PDT-MP3-HTC V V HTC PDT-MP3-V PDT-MP3-V..V Type Mill/Drill Unit V V PDT-SQT1-H PDT-SQT1-H..H Type Mill/Drill Unit V V V V PDT-SQT1-V PDT-SQT1-V..V Type Mill/Drill Unit V V V V PDT-SQT2-H PDT-SQT2-H..H Type Mill/Drill Unit V V V PDT-SQT2- HDE PDT-SQT2-HDE..Double End Mill/Drill Unit V V V PDT-SQT2- HTC PDT-SQT2-HTC..H Type Mill/Drill Unit.. Through Coolant V V V PDT-SQT2-V PDT-SQT2-V..V Type Mill/Drill Unit V V V PDT-SQT2- VTC PDT-SQT2-VTC..V Type Mill/Drill Unit.. Through Coolant V V V PDT-SQT3-H PDT-SQT3-H..H-Type Mill/Drill Unit V V V V PDT-SQT3-V PDT-SQT3-V..V-Type Mill/Drill Unit V V V V Reverse Turning Holder V Reverse Turning Holder V Reverse Turning Holder V V V Reverse Turning Holder V V V V V Reverse Turning Holder V V V Reverse Turning Holder/620RTH40 V V Reverse Turning Holder/ 630-RTH50 V Reverse Turning Holder/ 110-RTH40 V V V V Reverse Turning Holder/ 115-RTH40 V V V Reverse Turning Holder V Reverse Turning Holder/ 128-RTH50 V V V Socket 1 x 1/2 V Socket 1 x 1/2 V Socket 1 x 1/2 V V V V V Socket 1 x 1MT V V Socket 1 x 1MT V V V V V Socket 1 x 2MT V V Socket 1 x 2MT V V V V V Socket 1 x 3/4 V Socket 1 x 3/4 V Socket 1 x 3/4 V V V V V Socket 1 x 3/8 V Socket 1 x 3/8 V Socket 1 x 3/8 V V V V V Socket 1 x 5/16 V Socket 1 x 5/16 V Socket 1 x 5/16 V V V V V Socket 1 x 5/8 V Socket 1 x 5/8 V Socket 1 x 5/8 V V V V V Socket 1-1/2 x 1 V V V Socket 1-1/2 x 1 V V V Socket 1-1/2 x 1 V V V V V V V V Socket 1-1/2 x 1 V

120 VDI Tool Holder Mazak DESCRIPTION VDI Tool Holder For SQT CNC Lathe QT8 8D QT8 12D QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position QT40 12D-24 Position QT200C 12D QT250 12D QTN150 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 SQT15 SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D Socket 1-1/2 x 1/2 V V V Socket 1-1/2 x 1/2 V Socket 1-1/2 x 1/2 V V V V V V V Socket 1-1/2 x 1/2 V Socket 1-1/2 x 1/2 V Socket 1-1/2 x 1-1/4 V V V Socket 1-1/2 x 1-1/4 V V V Socket 1-1/2 x 1-1/4 V V V V V V V V Socket 1-1/2 x 1-1/4 V Socket 1-1/2 x 1MT V V V V V V V V V V Socket 1-1/2 x 2MT V V V V V V V V V V V Socket 1-1/2 x 3/4 V V V Socket 1-1/2 x 3/4 V Socket 1-1/2 x 3/4 V V V V V V Socket 1-1/2 x 3/4 V Socket 1-1/2 x 3/4 V Socket 1-1/2 x 3/8 V V Socket 1-1/2 x 3/8 V Socket 1-1/2 x 3/8 V V V V V V V Socket 1-1/2 x 3/8 V V Socket 1-1/2 x 3/8 V Socket 1-1/2 x 3MT V V V V V V V V V V Socket 1-1/2 x 5/16 V V Socket 1-1/2 x 5/16 V V V V V V V Socket 1-1/2 x 5/16 V V Socket 1-1/2 x 5/16 V Socket 1-1/2 x 5/8 V V Socket 1-1/2 x 5/8 V Socket 1-1/2 x 5/8 V V V V V V Socket 1-1/2 x 5/8 V Socket 1-1/2 x 5/8 V Socket 1-1/4 x 1 V V V V V Socket 1-1/4 x 1 V V Socket 1-1/4 x 1 V V V Socket 1-1/4 x 1 V V Socket 1-1/4 x 1/2 V V V V V Socket 1-1/4 x 1/2 V V Socket 1-1/4 x 1/2 V V V Socket 1-1/4 x 1MT V V V V V V V V V V Socket 1-1/4 x 2MT V V Socket 1-1/4 x 2MT V V V V V V V V V Socket 1-1/4 x 3/4 V V V V V Socket 1-1/4 x 3/4 V V Socket 1-1/4 x 3/4 V V V Socket 1-1/4 x 3/4 V V Socket 1-1/4 x 3/8 V V V V V Socket 1-1/4 x 3/8 V V Socket 1-1/4 x 3/8 V V V Socket 1-1/4 x 3MT V V Socket 1-1/4 x 5/16 V Socket 1-1/4 x 5/16 V V Socket 1-1/4 x 5/16 V V V Socket 1-1/4 x 5/8 V V V V V Socket 1-1/4 x 5/8 V V Socket 1-1/4 x 5/8 V V V Socket 2 x 1 V V V V V V V V V V V Socket 2 x 1/2 V V V V V V Socket 2 x 1/2 V Socket 2 x 1/2 V V V V V Socket 2 x 1-1/2 V V V V V V V V V V V Socket 2 x 1-1/4 V V V V V V V V V V Socket 2 x 1-3/4 V V V V V V V V V V V Socket 2 x 2MT V V V V V V V V V V V V Socket 2 x 3/4 V V V V V Socket 2 x 3/4 V Socket 2 x 3/4 V V V V V Socket 2 x 3MT V V V V V V V V V V V V Socket 2 x 4MT V V V V V V V V V V V V Socket 2 x 5/8 V V V V V Socket 2 x 5/8 V Socket 2 x 5/8 V V V V V Socket 2 x 7/8 V V V V V Socket 2 x 7/8 V Socket 2 x 7/8 V V V V Socket 3/4 x 1/2 V Socket 3/4 x 3/8 V Socket 3/4 x 5/16 V MULTIPLEX 630/430 MULTIPLEX 6300

121 DESCRIPTION VDI Tool Holder For SQT CNC Lathe QT8 8D QT8 12D QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position QT40 12D-24 Position QT200C 12D QT250 12D QTN150 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 VDI Tool Holder Mazak SQT15 SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D Socket 3/4 x 5/8 V TLH7606 SPECIAL 2 x 1 U DRILL SOCKET V V V TLH7604 SPECIAL 2 X 1-1/2 U DRILL SOCKET V V V TLH7605 SPECIAL 2 X 1-1/4 U DRILL SOCKET V V V TLH7607 SPECIAL 2 x 3/4 U DRILL SOCKET V V V TLH7307 Special 40mm x 1 V V V V V V V V TLH7544 Special 40mm x 1 U Drill Socket V V V V V V V TLH7306 Special 40mm x 1-1/4 U Drill Socket V V V V V V V V TLH7545 Special 40mm x 1-1/4 U Drill Socket V V V V V V V TLH7308 Special 40mm x 3/4 U Drill Socket V V V V V V V V TLH7543 Special 40mm x 3/4 U Drill Socket V V V V V V V MZK8537 Boring Bar Holder Split (2.000 ) Swiss Turn (Forward) V Swiss Turn (Reverse) V Tandem Turn Holder V MZK7220B Tandem Turn Holder V V MZK7220C Tandem Turn Holder V MZK8740 Tandem Turn Holder V Turning Block V Turning Block V V Turning Block V Turning Holder V V V I Turret Cap/610-CAP40 V V V Turret Cap V V V V V V V V Turret Cap/630-CAP50 V V Turret Cap/110-CAP40 V V V V V V V V Turret Cap Turret Cap V V V V 0352SET0420 Turret Clamp Set V U - Drill Holder (40mm) V U - Drill Socket 1-1/2 x 20 V U - Drill Socket 2 x 32 V V V V V U Drill Holder V U Drill Holder V U Drill Holder (2 ) V V V U Drill Holder (2 ) V U Drill Holder (20mm) V U Drill Holder (20mm)/ 610-UDH40* V U Drill Holder (25mm) V U Drill Holder (25mm)610-UDH40 V U Drill Holder (32mm) V V U Drill Holder (32mm)/110-UDH40 V U Drill Holder (40mm) V U Drill Holder (40mm) V V U Drill Holder (40mm) V V V U Drill Holder (40mm) V V V U Drill Holder (40mm)/ 620-UDH40 V U Drill Holder (40mm)/ 630-UDH50 V U Drill Holder (40mm)/ 115-UDH40 V U Drill Holder (40mm)/ 128-UDH50 V MZK8894 U Drill Holder (1.500 ) MZK8893 U Drill Holder (2.000 ) U -Drill Socket 2 x 25 V V V V V U Drill Socket 32 x 25 V U-Drill Holder V V V U-Drill Socket 1-1/2 x 25 V U-Drill Socket 1-1/2 x 32 V U-Drill Socket 2 x 20 V V V V V U-Drill Socket 2 x 40 V V V V V U-Drill Socket 32 x 20 V V V U-Drill Socket 32 x 20 V U-Drill Socket 32 x 25 V V V V U-Drill Socket 40 x 20 V V V V V V V V V U-Drill Socket 40 x 20 V V V V V V V V U-Drill Socket 40 x 25 V V V V V V V V V U-Drill Socket 40 x 25 V V V V V V V V U-Drill Socket 40 x 32 V V V V V V V V V U-Drill Socket 40 x 32 V V V V V V V V Z Offset Turning Holder V Z Offset U Drill Holder (40mm)/ 620-UDH40* V Mazak Boring Sleeves (Socket) D d A (mm) B(mm) D d A (mm) B(mm) MK-E1.5-1/4 1-1/2 1/ MK-E1.25-1/4 1-1/2 1/ MK-E1.5-3/8 1-1/2 3/ MK-E1.25-3/8 1-1/2 3/ MK-E1.5-1/2 1-1/2 1/ MK-E1.25-1/2 1-1/2 1/ MK-E1.5-5/8 1-1/2 5/ MK-E1.25-5/8 1-1/2 5/ MK-E1.5-3/4 1-1/2 3/ MK-E1.25-3/4 1-1/2 3/ MK-E / MK-E / MK-E /2 1-1/ MULTIPLEX 630/430 MULTIPLEX 6300

122 VDI Tool Holder OKUMA VDI Holder For For OKUMA (Angular Head ) OKUMA D X S MAX RPM LB200 OK-DA3020B ER20 L300M OK-DA4025B ER25 Dimensions ( mm ) A B C E F G M CALL CALL OKUMA D X S MAX RPM LT200-MY OK-LT- DA3020B ER20 Dimensions ( mm ) A B C G M CALL For OKUMA (DA Type) For OKUMA (Axial Milling and Drilling ) OKUMA Dimensions (mm / inch) Tool System Collet DIN-6499 A C D LB200M LB200MY LB200M-DA30 LB200MY-DA LT10MY LT10MY-DA LT15MY LT15MY-DA LT25MY LT25MY-DA LU15M LU25M LB300M LB400M LB35IIM LU35M LU15M-DA40 LU25M-DA40 LB300M-DA40 LB400M-DA40 LB35IIM-DA50 LU35M-DA LB45IIM LB45IIM-DA ER mm ER mm ER mm ER-32 1/8-3/4 ER mm ER-32 1/8-3/4 ER mm ER-32 1/8-3/4 ER mm ER-32 1/8-3/4 ER mm ER-40 1/8-1 ER mm ER-50 3/8-1 1/4 CALL CALL CALL CALL CALL CALL CALL CALL OKUMA D X S MAX RPM LB200 OK-DA30ER ER25 L300M OK-DA40ER ER32 Dimensions ( mm ) A B C CALL CALL OKUMA D X S MAX RPM LT200-MY OK-LT- DA30ER ER25 Dimensions ( mm ) A B C G CALL OKUMA D X S MAX RPM LU400M OK-LU400M- DA40-ER ER40 Dimensions ( mm ) A B C D CALL

123 VDI Tool Holder OKUMA OKUMA D X S MAX RPM LT15M/ LT300/ LT300MYW OK-LT-DA40-32A ER32 Dimensions ( mm ) A B C G CALL For OKUMA (DF Type) DFRL DFRR OKUMA Dimensions (mm / inch) Tool System Collet DIN-6499 A B D LB200M LB200M-DFRL LT10MY LT10MY-DFRL30 LT10MY-DFRR LU15M LU15M-DFRL LU25M LU25M-DFRL LT15MY LT25MY LT15MY-DFRL40 LT15MY-DFRR40 LT25MY-DFRL40 LT25MY-DFRR LB35IIM LB35IIM-DFRL LU35M LU35M-DFRR LB45IIM LB45IIM-DFRL ER mm ER-20 1/8-1/2 ER mm ER-20 1/8-1/2 ER mm ER-32 1/8-3/4 ER mm ER-32 1/8-3/4 ER mm ER-32 1/8-3/4 ER mm ER-32 1/8-3/4 ER mm ER-40 1/8-1 ER mm ER-40 1/8-1 ER mm ER-50 3/8-1 1/4 CALL CALL CALL CALL CALL CALL CALL CALL CALL For OKUMA (Radial Milling and Drilling ) OKUMA D X S MAX RPM L300M OK-FL ER32 Dimensions ( mm ) A B C G M CALL OKUMA D X S MAX RPM LT200-MY LT200-MY OK-LT- FR OK-LT- FL ER ER25 Dimensions ( mm ) A B C G M CALL CALL

124 VDI Tool Holder OKUMA OKUMA D X S MAX RPM LT15M/ LT300/ LT300MYW OK-LT-FL40-32A ER32 Dimensions ( mm ) A B C G M CALL For OKUMA (DB Type) OKUMA D X S MAX RPM LB200 OK-BL ER25 L300M OK-BL ER32 Dimensions ( mm ) A B C G M CALL CALL DBRL DBRR OKUMA Dimensions Tool System Collet DIN-6499 A B D LB300M LB300M-DBRL ER mm ER-32 1/8-3/4 CALL LB400M LB400M-DBRL ER mm ER-32 1/8-3/4 CALL LB35IIM LB35IIM-DBRL ER mm ER-40 1/8-1 CALL LU35M LU35M-DBRL ER mm ER-40 1/8-1 CALL For OKUMA (Offset Type) OKUMA Dimensions ( mm / inch) Tool System Collet DIN-6499 A B C D LU15M 1 LU15M-ASB ER mm ER-20 1/8-1/2 CALL LU15M 2 LU15M-ASF ER mm ER-20 1/8-1/2 CALL LU15M 3 LU15M-ASFB ER mm ER-40 1/8-1 CALL OKUMA D X S MAX RPM LT200-MY OK-LT- DF302590D ER25 Dimensions ( mm ) A B C G M CALL

125 VDI Offset Driven Tool Face/Back Drill/Endmill Unit S VDI Tool Holder OKUMA 2 Face Drill/Endmill Unit S 3 Back Drill/Endmill Unit S Okuma Type ASFB40100 ASF ASB Face Tapping Unit S 7 Face/Back VDI Tool Suitable for Okuma turning center LR15MW 1 TASF40100 OK-ASFB40 Back Tapping Unit S 6 Face VDI Tool Suitable for Okuma turning center LR15MW 4 TASB40100 ID Toolholder Base (AS) OK-ASF40 ID Toolholder Base (BS) 8 VDI Tool Holder Suitable for Okuma turning center LB45II OK-ASF60 ID Toolholder Base (CS) * * * *Inch sizes available ID40-AS * *Inch sizes available ID40-BS *Inch sizes available ID40-CS 5 OD Toolholder Base (BS) OD Toolholder Base (ES) OD Toolholder Base (CS) OD Toolholder Base (FS) Inch sizes available OD40-BS Inch sizes available OD40-ES Inch sizes available OD40-CS * OD40-FS *Inch sizes available

126 VDI Tool Holder OKUMA For OKUMA (Boring Bar Holder) OKUMA D X Dimensions ( mm ) A B C E LB200 OK CALL L300M OK CALL OKUMA D X Dimensions ( mm ) A B C E LB200 OK CALL L300M OK CALL For OKUMA (Facing Holder) OKUMA D X Dimensions ( mm ) A B C LB200 OK-A CALL LB200 OK-B CALL L300M OK CALL L300M OK CALL For OKUMA (Turning Holder ) OKUMA D X Dimensions ( mm ) A B C LB200 OK-C CALL L300M OK-C CALL OKUMA D X Dimensions ( mm ) A B C E M LB200 OK CALL OKUMA D X Dimensions ( mm ) A B C E M LB200 OK CALL

127 VDI Tool Holder OKUMA For OKUMA (Boring Bar Holder ) OKUMA D X Dimensions ( mm ) A B C E F M LT15M/ LT300 LB300-MYW OK-LT-IDI-H40-100L CALL OKUMA D X Dimensions ( mm ) A B C E F M LT15M/ LT300 LB300-MYW OK-LT-IDII- H CALL OKUMA D X Dimensions ( mm ) A B C E F LT15M/ LT300 LB300-MYW OK-LT-IDI CALL OKUMA D X Dimensions ( mm ) A B C E F M LT200-MY OK-LT-II-H CALL

128 VDI Tool Holder OKUMA OKUMA D X Dimensions ( mm ) A B C E F M LT200-MY OK-LT-I-H32-100L CALL For OKUMA (Facing Holder ) OKUMA D X Dimensions ( mm ) A B C E F LT200-MY OK-LT-OD CALL OKUMA D X Dimensions ( mm ) A B C E F X LT200-MY OK-LT-OD-I-D CALL OKUMA D X Dimensions ( mm ) A B C E F X LT200-MY OK-LT-OD-I-S CALL

129 VDI Tool Holder For MURATEC RADIAL MILLING AND DRILLLING HEAD VDI Tool Holder MURATEC MURATEC D X S MAX RPM Dimensions ( mm ) A B C G M MT20 FR40M ER CALL MURATEC D X S MAX RPM Dimensions ( mm ) A B C G E M MT20 BR40M ER CALL MURATEC D X S MAX RPM Dimensions ( mm ) A B C G M MT6 MT6- MDF ER CALL MURATEC D X S MAX RPM Dimensions ( mm ) A B C G MT6 MT6- MDA40ER ER CALL ANGUAL HEAD MURATEC D X S MAX RPM Dimensions ( mm ) A B C G E M MT20 MT25 MT20- DA4025B ER CALL

130 VDI Tool Holder MURATEC VDI Tool Holder For MURATEC AXIAL MILLING AND DRILLLING HEAD MURATEC D X S MAX RPM MT20 DA40M ER32 Dimensions ( mm ) A B C CALL MURATEC D X S MAX RPM MT25 MT25- DA ER32 Dimensions ( mm ) A B C G M CALL DOUBLE BORING BAR HOLDER MURATEC D D1 L1 L2 L3 L4 L5 L6 MT20 MU4040B CALL TURNING HOLDER MURATEC D L1 L2 L3 L4 L5 L6 L7 MT20 MU4025T CALL

131 VDI Tool Holder For NAKAMURA VDI Tool Holder NAKAMURA AXIAL MILLING AND DRILLLING HEAD (unit: mm) NAKAMURA D X WT-100 DA44NAER ER32 WT-150 DA55NAER ER25 WT-300 DA65NAER ER32 S MAX RPM A B C E CALL CALL CALL AXIAL MILLING AND DRILLLING HEAD (unit: mm) NAKAMURA D X WT-100 DA44NAER2029/ ER20 S MAX RPM I A B C E M : CALL RADIAL MILLING AND DRILLLING HEAD (unit: mm) NAKAMURA D X WT-100 DF44NA ER20 WT-150 DF55NA ER25 WT-300 DF65NA ER32 S MAX RPM A B C G M CALL CALL CALL (unit: mm) Internal Coolant NAKAMURA D X WT-150 DF55NA2555K ER25 S MAX RPM A B C F G M (unit: mm) NAKAMURA D X WT-300 DF65NA3265D ER32 S MAX RPM A B C F G M

132 VDI Tool Holder NAKAMURA Collet Chuck for NAKAMURA MURATEC X A B C E F WT-100 R WT-150 R WT-300 W Collet Chuck for NAKAMURA Collet d1 d2 B1 H1 L1 L2 L3 NK20ER25 ER CALL NK30ER32 ER CALL NK30ER40 ER CALL NK40ER25 ER CALL NK40ER32 ER CALL NK40ER40 ER CALL NK50ER40 ER CALL Morse Taper Adaptor for NAKAMURA d1 d2 B1 H1 H2 L1 L2 NK50MT3 50 MT# CALL NK50MT4 50 MT# CALL Boring Bar Holder for NAKAMURA d1 d2 d3 B1 H1 L1 L2 L3 NK / NK / NK / NK NK / NK / NK / NK NK / NK / NK / NK NK / NK / NK / NK NK / NK / NK / NK NK / NK / NK / NK

133 VDI Tool Holder TAKAMAZ VDI Tool Holder For TAKAMAZ AXIAL MILLING AND DRILLLING HEAD DOUBLE COLLETS, Y OFFSET (unit: mm) TAKAMAZ D X XY-120 TADA301624D ER16 S MAX RPM A B C E M AXIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-120 TADA30ER ER20 S MAX RPM A B C E RADIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-120 TADF ER20 S MAX RPM A B C G M RADIAL MILLING AND DRILLLING HEAD/ DOUBLE HEAD (unit: mm) TAKA- MAZ D X S MAX RPM A B C E G M XY-120 TADF302075D ER RADIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-12 TADF ER20 S MAX RPM A B C G M

134 VDI Tool Holder TAKAMAZ AXIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-12 TADA38ER ER20 S MAX RPM A B C G AXIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-180 TADA50ER ER20 S MAX RPM A B G M CALL AXIAL MILLING AND DRILLLING HEAD / OFFSET (unit: mm) Max. RPM: 400rpm TAKAMAZ D X d I A B C E M M1 M2 TADA25OF30127C : BORING BAR HOLDER (unit: mm) DB25 TAKAMAZ X A B C E XY-120 TAXY120DB B25 (unit: mm) TAKAMAZ X A B C E F XY-120 TAXY120B BORING BAR HOLDER B32 (unit: mm) TAKAMAZ X A B C E F XY-180 TAXY180B CALL Double BORING BAR HOLDER (unit: mm) TAKAMAZ X A B C E F XY-120 TAXY12025X

135 VDI Tool Holder TAKAMAZ / STAR CUT OFF HOLDER (unit: mm) TAKAMAZ X A B C E F XY-120 TAXY120C MULTIPLE TURNING HOLDER (unit: mm) TAKAMAZ X A B C E F XY-120 TAXY12025X VDI Tool Holder For STAR AXIAL MILLING AND DRILLINGHOLDER (unit: mm) STAR D X S Max rpm A B C E STDA22ER ER11M (unit: mm) RADIAL MILLING AND DRILLING HOLDER STAR D X ECAS20 STDA ER ER11M ECAS20 STDA ER ER16M ECAS20 STDA ER ER16M S Max rpm A B C E (unit: mm) STAR D X ECAS20 BR34ER ER16M S Max rpm A B C E F M BORING BAR HOLDER (unit: mm) STAR D A B C E D1 D2 ER STATIC TOOL HOLDER STB STB STB STB STB (unit: mm) STAR D X STB5172ER16M ER16M S A B C E

136 VDI Tool Holder CITIZEN RADIAL TRIPPLE HEADS MILLING AND DRILLING HOLDER (unit: mm) STAR D X S Max rpm A B C E G M M1 M2 ECAS20 BR34163C ER16M CALL RADIAL DOUBLE HEADS MILLING AND DRILLING HOLDER (unit: mm) STAR D X S Max rpm A B C E G M M1 ECAS20 BR34162C ER16M CALL VDI Tool Holder For CITIZEN AXIAL MILLING AND DRILLING HOLDER (unit: mm) CITIZEN D X L 5 20 GSE910 S Max rpm I A B C E M M1 M2 DA32OF30CUT : RADIAL MILLING AND DRILLING HOLDER TRIPLE HEADS (unit: mm) TRIPLE BORING BAR HOLDER CITIZEN D X L 5 20 GSE910 L 7 20 GSE1110 S Max rpm A B C G M M1 M2 BR323C ER16M BR323C ER16M (unit: mm) CITIZEN D X A B C M M1 M2 L 5 20 GSE910 L 7 20 GSE1110 GSE GSE

137 VDI Tool Holder CITIZEN AXIAL MILLING AND DRILLING HOLDER (unit: mm) CITIZEN D X GSE-907 GSC907- DA25ER11 S Max rpm A B G ER CALL (unit: mm) CITIZEN D X GSE-307 GSC307- DA25ER11 S Max rpm A B G ER CALL RADIAL MILLING AND DRILLING HOLDER - MULTI HEAD (unit: mm) CITIZEN D X GSE2007 GSE2007- DB S Max rpm A B C E G H M M ER CALL (unit: mm) CITIZEN D X GSE-107 GSE107- DF ER16M S Max rpm A B C G M CALL (unit: mm) CITIZEN D X GSE-107 GSE107- DB S Max rpm A B C E G M ER CALL

138 VDI Tool Holder DAEWOO RADIAL MILLING AND DRILLING HOLDER (unit: mm) CITIZEN D X S Max rpm A B C E G M BSE-107 BSE-107- DB ER CALL (unit: mm) CITIZEN D X S Max rpm A B C E G M M1 BSE-107 BSE-107- DB C ER CALL TRIPLE BORING BAR HOLDER (unit: mm) CITIZEN D X A B C E M M1 M2 GDF510 GDF CALL GDF702 GDF CALL VDI Tool Holder For DAEWOO RADIAL MILLING AND DRILLING HOLDER (unit: mm) DAEWOO D X PUMA230M DW230DF ER25 PUMA300M DW300DF ER32 PUMA350M DW350DF ER40 PUMA700M DW700DF ER50 (unit: mm) Inernal Colant DAEWOO D X PUMA230M DW230DF552560K ER25 PUMA300M DW300DF653272K ER32 PUMA350M DW350DF754060K ER40 PUMA700M DW700DF K ER50 S Max rpm A B C G M S Max rpm A B C G M (unit: mm) DAEWOO D X PUMA300M DW300DF653272D 65 ER32

139 AXIAL MILLING AND DRILLING HOLDER (unit: mm) DAEWOO D X PUMA230M DW230DA ER25 PUMA300M DW300DA ER32 PUMA350M DW350DA ER40 PUMA700M DW700DA ER50 (unit: mm) DAEWOO D X PUMA230M DW230DA5525K ER25 PUMA300M DW300DA6532K ER32 PUMA350M DW350DA7540K ER40 PUMA700M DW700DA8550K ER50 S Max rpm A B C E S Max rpm VDI Tool Holder DAEWOO A B C E (unit: mm) DAEWOO X A B C E F M PA300 DW300-C PA350 DW350-C PA700 DW700-C (unit: mm) DAEWOO X A B C M PA230 DW230-F PA300 DW300-F PA350 DW350-F PA700 DW700-F (unit: mm) DAEWOO X A B C E F M PA230 DW230-C PA230 DW230-C (unit: mm) DAEWOO D A B C E M PA230 DW230-B PA230 DW230-B38.1OF PA230 DW230-B50.8OF60 2 PA300 DW300-B PA350 DW350-B PA700 DW700-B

140 VDI Tool Holder MORI SEIKI VDI Tool Holder For For MORI SEIKI (DA Type) unit :MM MORI SEIKI SL-150 DL150 ZL150 SL-200 SL-250 ZL-200 Tool System Collet DIN-6499 E mm ER-20 1/16-1/2 E mm ER-32 1/8-3/4 S RPM A B G For MORI SEIKI (DF Type) unit :MM MORI SEIKI SL-150 DL150 ZL150 SL-200 SL-250 ZL-200 E (E ) Tool System Collet DIN mm ER-20 1/16-1/2 E mm ER-32 1/8-3/4 S RPM A B C G M For MORI SEIKI (DB Type) unit :MM MORI SEIKI DL151 E (E ) Tool System Collet DIN mm ER-20 1/16-1/2 DL151 E mm ER-25 1/8-5/8 SL-150 DL-150 ZL-150 SL-200 SL-250 ZL-200 E mm ER-20 1/16-1/2 E (E ) 2-20mm ER-32 1/8-3/4 S RPM A B C G M For MORI SEIKI (Offset Type) MORI Spec. Dimensions Tool System RPM SEIKI A B D Collet DIN-6499 DL-151 mm E ER mm 3000 inch ER-25 1/8-5/8 For MORI SEIKI Double Head Holder unit :MM MORI SEIKI Tool System Collet DIN-6499 S RPM A B C F G M SL-200 SL-250 ZL-200 E (E ) 2-20mm ER-32 1/8-3/

141 For MORI SEIKI RAIDAL MILLING AND DRILLING HEAD HEAVY CUT VDI Tool Holder MORI SEIKI unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D Tool System Collet DIN-6499 E1500-TA-T mm ER-32 1/8-3/4 S RPM A B C G M For MORI SEIKI RAIDAL MILLING AND DRILLING HEAD unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D Tool System Collet DIN-6499 E1500-T mm ER-32 1/8-3/4 S RPM A B C G M For MORI SEIKI AXIAL MILLING AND DRILLING HEAD unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D Tool System Collet DIN-6499 E1500-T mm ER-32 1/8-3/4 S RPM A B C E unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D Tool System Collet DIN-6499 E1500-OFF50ER mm ER-20 1/16-1/2 E1500-OFF50ER mm ER-25 1/8-5/8 S RPM A B C G M unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X E1500-T A mm ER-32 E1500-TA-T mm ER-32 E1500-TA-T mm ER-40 S RPM A B C F G M unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X E1500- T B mm ER-25 S RPM A B C F G M

142 VDI Tool Holder MORI SEIKI For MORI SEIKI Radial Milling & Drilling Head unit :MM MORI SEIKI NZ1500 NZ2000 D Tool System Collet DIN-6499 T32473A mm ER-25 S RPM A B C G M For MORI SEIKI Axial Milling & Drilling Head unit :MM MORI SEIKI NZ1500 NZ2000 D Tool System Collet DIN-6499 T32473A mm ER-25 S RPM A B C E unit :MM MORI SEIKI NZ1500 NZ2000 D A B E F X M T32408A T12080A unit :MM MORI SEIKI NZ1500 NZ2000 D A B C E F X M T00276A unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D A B C M X T03005-F

143 VDI Tool Holder MORI SEIKI unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D A B C E M X T00186A10-C unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D A B C E M d T10097B unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D A B C E F M d T10097B VDI Tool Holder For For MIYANO (DA Type) BND-20, BND-34S, BND-34TS, BND-34TR, BND-42, BND-42TS, BND-51, BNE-34SY, BNE-51SY, BNE-34S, BNE-46S, BNE-51S, LR-01R, LR-02R Coupling Bevel Gear Specifi cations: Machine BNE-34S BNE-51S D X DA38ER mm ER-20 1/8-1/2 BNE DA45ER mm ER-20 1/8-1/2 BNE DA45ER mm ER-25 1/8-5/8 BND-51 BND-34S BNJ-42S DA45ER20S mm ER-20 1/8-1/2 DA45BN- JER mm ER-20 1/8-1/2 S Max rpm A B C E G MY-DA40

144 VDI Tool Holder MIYANO / WASINO For MIYANO (DF Type) BND-20, BND-34S, BND-34TS, BND- 34TR, BND-42, BND-42TS, BND-51, BNE-34SY, BNE-51SY, BNE-34S, BNE-46S, BNE-51S, LR-01R, LR-02R Specifi cations: Machine D X S Max rpm A B C E G M BNE-34S DF45ER mm ER-20 1/8-1/2 BNE DF45ER mm ER-25 1/8-5/8 BNE DF45ER20L mm ER-20 1/8-1/ BNE DF45BN- JER mm ER-20 1/8-1/ For MIYANO (DB Type) BNE-34S, BNE-51S Specifi cations: Machine D X S Max rpm A B C G M BNE-34S BNE-51S DB38ER mm ER-20 1/8-1/ For MIYANO (AUTO TAPER Type) Specifi cations: Machine MIYANO D X S A B D1 TE25ER mm ER TE32ER mm ER-20 1/8-1/ TE40ER mm ER-25 1/8-5/ For MIYANO Double Head TE50ER mm ER-32 1/8-3/ Specifi cations: Machine D X BNE DF452065D mm ER-20 1/8-1/2 S Max rpm A B C E F G M VDI Tool Holder For WASINO For WASINO A-12 Axial Milling & Drilling Head Specifi cations: (Maximum RPM: 6000) Machine D X S A B C E H A DA55ER20 ER mm A DA55ER32 ER mm For WASINO A-12 Radial Milling & Drilling Head Specifi cations: (Maximum RPM: 4000) Machine D X S A B C G M H A DF55ER20 ER mm A DF55ER32 ER mm

145 VDI Tool Holder WASINO VDI Tool Holder For WASINO For WASINO A-18 Radial Milling & Drilling Head Specifi cations: (Maximum RPM: 3500) D X DF65ER32 65mm 2.56 ER mm ER-32 1/8-3/4 S Amm B C G M H 50mm mm mm mm mm mm 0.98 For WASINO A-12 Boring Bar Holder Specifi cations: D X A B C E A12-B25 55mm 25mm 35mm 85mm 78.5mm 70mm A12-B32 55mm mm mm mm mm mm 2.76 For WASINO A-12 Double Boring Bar Holder External and internal coolant supply. Specifi cations: For WASINO A-18 Axial Milling & Drilling Head Specifi cations: (Maximum RPM: 6000) D X A B C E F A12-B16X2 55mm 16mm 35mm 85mm 78.5mm 70mm 130mm A12-B25X2 55mm mm 0.98 External and internal coolant supply. 35mm mm mm mm mm 5.12 D Collet DIN-6499 S A B C H DA65-90L-ER20M 65mm ER-20M 1-13mm 28mm 120mm 90mm 88mm 24.8mm 2.56 ER-20M 1/16-1/ DA65-80L-ER25 DA65-ER32 DA65-90L-ER32 65mm mm mm 2.56 ER mm ER-25 ER mm ER-32 1/8-3/4 ER mm ER-32 1/8-3/4 40mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 0.98 For WASINO A-18 Axial Face Milling Head Specifi cations: (Maximum RPM: 4000) D X A B C H DA65-FM32 65mm 32mm 50mm 40mm 88mm 24.8mm DA65-FM32-75L DA65-FM22-60L 65mm mm mm mm mm mm mm mm mm mm mm mm 0.98 For WASINO A-18 Axial Side Cutter Head Specifi cations: (Maximum RPM: 4000) D X A B C H DA65-SC mm 25.4mm 115mm 60mm 88mm 24.8mm DA65-SC22-90 DA65-SC mm mm mm mm mm mm mm mm mm mm mm mm 0.98

146 VDI Tool Holder WASINO VDI Tool Holder For WASINO For WASINO A-12 For WASINO A-18 Turning Holder Turning Holder Specifi cations: D X A B C A12-T16 55mm 16mm 55mm 85mm 50mm A12-T A12-T External coolant supply. Specifi cations: 20mm mm 0.63 D X A B C A18-T20 65mm 20mm 65mm 97mm 65mm External coolant supply. 55mm mm mm mm mm mm 1.97 For WASINO A-18 Boring Bar/ U Drill Holder Specifi cations: D X A B C A18-B32 65mm 32mm 105mm 97mm 55mm A18-B40 65mm 2.56 A18-B40-BK50 65mm 2.56 External coolant supply. 40mm mm mm mm mm mm mm mm 2.17 For WASINO A-18 Facing Holder Specifi cations: D X A B C A18-F20 65mm mm mm mm mm 1.97 External coolant supply. For WASINO J1 Facing Holder X A B C J1-F20 20mm 45mm 60mm 78.5mm For WASINO J1 Boring Bar Holder X A B C E J1-B25 25mm 45mm 60mm 45mm 25mm For WASINO J1 Double boring Bar Holder X A B C E F J1-B16X2 16mm 62mm 60mm 45mm 25mm 51mm

147 Okuma Style Boring Bar Holder; ID Tool Block VDI Tool Holder Tool Blocks A H1 H2 1 L1 L2 L3 B1 B2 LB LB MM LB LB LB Okuma Style Turning Holder; OD Tool Block H1 H2 H3 L1 L2 L3 B1 LB MM LB LB LB LB Okuma Style Square Holder; OD Tool Block H1 H2 H3 L1 L2 L3 B1 B2 LB LB MM LB LB LB HAAS Style; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 HSL HSL HSL20/ HSL20/ HSL20/ HSL HSL

148 VDI Tool Holder Tool Blocks HAAS Style; OD Tool Block MORI SEIKI Style; ID Tool Block H1 H2 H3 L1 L2 L3 B1 B2 HSL / HSL20/ HSL / MORI SEIKI Style ; OD Tool Block A H1 H2 L1 L2 L3 B1 B2 MSL20/ / MSL NL / NL H1 L1 L2 L3 L4 L5 H2 H3 B B2 MSL20/ MSL ROMI Style; ID Tool Block ROMI Style ; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 B3 ROM-86804M A H1 H2 L1 L2 L3 B1 B2 B3 ROM-21171M

149 ROMI Style ; ID Tool Block VDI Tool Holder Tool Blocks A H1 H2 L1 L2 L3 B1 B2 B3 ROM-83582M OKUMA HOWA Style ; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 OHB4A OHB4A OHB6B OHB6B OKUMA HOWA Style ; OD Tool Block H1 H2 H3 L1 L2 L3 B1 B2 OHF4A OHF6B MAZAK Style ; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 B3 NEX200/ MAZAK Style ; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 NEX

150 CNC Tooling System Anggle Head Gromax Tooling System ANGLE HEAD Specifi cation: Unit:mm / Max rpm: 3000 BT Holder CAT Holder SK Holder D S L A B C E F G H BT40AHER32185 C40AHER32185 SK40AHER / BT50AHER32195 C50AHER32195 SK50AHER /85/ HSK HOLDERS FOR TURNING MILLS I.D. HSK HOLDER FOR TURNING MILLS Unit: mm φd1 φd2 L1 L2 M HSKA63WH-B M8 HSKA63WHB M8 HSKA63WHB M8 HSKA63WHB M10 HSKA63WHB M10 HSKA63WHB M12 HSKA63WHB M12 HSKA63WHB M16 O.D. HSK HOLDER FOR TURNING MILLS Unit: mm L L1 H H1 H2 h HSKA63W-ETA Unit: mm L L1 H H1 H2 h HSKA63W-ETN2525R Unit: mm L L1 H H1 H2 h HSKA63W-ETH Unit: mm L L1 H H1 H2 h HSKA63W-ETV2525R

151 Deep Hole Boring Holders Tungsten Carbide bar allow vibration free for deep hole boring. Bore depths up to 6xφD1 (M) Double Cutter Boring Heads (Standard Type) Coolant Through. CNC Tooling System Boring System φd1 φd2 M L L1 CAT40-ECK (25) (33) (150) 3.94 (100) (185) CAT40-ECK (32) (42) (192) 5.91 (150) (235) CAT50-ECK (25) (33) (150) 4.92 (125) (195) CAT50-ECK (32) (42) (195) 4.92 (125) (230) CAT50-ECK (40) (50) (240) 5.91 (150) (285) CAT50-ECK (50) (60) (300) 7.87 (200) (355) BT40-ECK (25) (33) (150) 3.94 (100) (185) BT40-ECK (32) (42) (192) 5.91 (150) (235) BT50-ECK (25) (33) (150) 4.92 (125) (195) BT50-ECK (32) (42) (195) 4.92 (125) (230) BT50-ECK (40) (50) (240) 5.91 (150) (285) BT50-ECK (50) (60) (300) 7.87 (200) (355) Boring Heads Double Cutter Boring Heads (Standard Type) ECK No. φd1 L φd (Boring Range) Cutter (T) ERB ( ) CCMT ERB ( ) CCMT ERB ( ) CCMT09T308 ERB ( ) CCMT ERB ( ) CCMT ERB ( ) CCMT Double Cutter Boring Heads (10 o Type) ECK No. φd1 L φd (Boring Range) Cutter (T) ERB27-35A ( ) SCMT ERB34-44A ( ) SCMT ERB43-55A ( ) SCMT09T308 ERB-54-76A ( ) SCMT ERB75-105A ( ) SCMT ERB A ( ) SCMT Double Cutter Boring Heads (2-STEP Type) ECK No. φd1 L φd (Boring Range) Cutter (T) ERB27-35S ( ) CCMT ERB34-44S ( ) CCMT ERB43-55S ( ) CCMT09T308 ERB-54-76S ( ) CCMT ERB75-105S ( ) CCMT ERB S ( ) CCMT Fine Boring Heads ECK No. φd1 L φd (Boring Range) Cutter (T) EFB ( ) TPGT080202L EFB ( ) TPGT080202L EFB ( ) TPGT090202L EFB ( ) TPGT090202L EFB ( ) TPGT090202L EFB ( ) TPGT090202L

152 CNC Tooling System Boring System Boring Holder CAT Style Shank ECK φd1 φd2 M L L1 L2 L3 price Type No. inch inch inch inch (mm) Inch CAT40-ECK1-60 CAT (60) CAT40-ECK1-80 CAT (80) CAT40-ECK1-100 CAT (100) CAT40-ECK2-80 CAT (80) CAT40-ECK2-100 CAT (100) CAT40-ECK2-125 CAT (125) CAT40-ECK2-150 CAT (150) - CAT40-ECK3-100 CAT (100) CAT40-ECK3-125 CAT (100) CAT40-ECK4-100 CAT (100) CAT40-ECK4-125 CAT (125) CAT40-ECK5-100 CAT (100) CAT40-ECK5-125 CAT (125) CAT40-ECK6-100 CAT (100) CAT50-ECK1-125 CAT (125) CAT50-ECK2-100 CAT (100) CAT50-ECK2-125 CAT (125) CAT50-ECK3-100 CAT (100) CAT50-ECK3-125 CAT (125) CAT50-ECK3-150 CAT (150) CAT50-ECK4-100 CAT (100) CAT50-ECK4-150 CAT (150) CAT50-ECK4-200 CAT (200) CAT50-ECK5-150 CAT (150) CAT50-ECK5-200 CAT (200) CAT50-ECK5-250 CAT (250) CAT50-ECK6-150 CAT (150) CAT50-ECK6-200 CAT (200) CAT50-ECK6-250 CAT (250) BT (MAS403) Style Shank ECK φd1 φd2 M L L1 L2 L3 price Type No. (mm) (mm) BT30-ECK1-60 BT BT30-ECK2-100 BT BT30-ECK3-80 BT BT30-ECK4-80 BT BT40-ECK1-60 BT BT40-ECK1-80 BT BT40-ECK1-100 BT BT40-ECK2-80 BT BT40-ECK2-100 BT BT40-ECK2-125 BT BT40-ECK2-150 BT BT40-ECK3-100 BT BT40-ECK3-125 BT BT40-ECK3-150 BT BT40-ECK4-100 BT BT40-ECK4-125 BT BT40-ECK4-150 BT BT40-ECK5-100 BT BT40-ECK5-125 BT BT40-ECK5-150 BT BT40-ECK5-200 BT BT40-ECK6-100 BT BT50-ECK1-100 BT BT50-ECK2-100 BT BT50-ECK2-125 BT BT50-ECK3-100 BT BT50-ECK3-125 BT BT50-ECK3-150 BT BT50-ECK4-100 BT BT50-ECK4-150 BT BT50-ECK4-200 BT BT50-ECK5-150 BT BT50-ECK5-200 BT BT50-ECK5-250 BT BT50-ECK6-150 BT BT50-ECK6-200 BT BT50-ECK6-250 BT

153 SD PRECISION COLLET CNC Tooling System Collet COLLET LEVEL RUNOUT AA 0.007MM / A 0.01MM / SD06 SD10 SD16 SD20 Order Code Range Order Code Range Order Code Range Order Code φ d inch mm inch mm inch mm inch mm SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD25 SD SD Order Code φ d SD SD inch mm SD SD TG Collect TG100 Collet Series /ea. Inch Decimal Inch Decimal TG-093 3/ TG-562 9/ TG-109 7/ TG / TG-125 1/ TG / TG-140 9/ TG / TG-156 5/ TG-625 5/ TG / TG / TG-188 3/ TG / TG / TG / TG-218 7/ TG / TG / TG / TG-250 1/ TG / TG / TG / TG-281 9/ TG-750 3/ TG / TG / TG-312 5/ TG / TG / TG / TG / TG / TG / TG / TG-375 3/ TG / TG / TG / TG / TG-875 7/ TG / TG / TG-437 7/ TG / TG / TG / TG / TG / TG / TG / TG-500 1/ TG / TG / TG / TG / TG TG / SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD SD ER Spring Collet ER11 ER16 ER20 ER25 ER32 ER40 /ea. /ea /ea /ea /ea /ea v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v Unit: mm ER Collect Set ER11-GR (13 pcs) ER16-GR (10 pcs) ER20-GR (12 pcs) ER25-GR (15 pcs) ER32-GR (18 pcs) ER40-GR (22 pcs)

154 CNC Tooling System Collet/ ER Holder ER Collet Chuck CAT40 ER Collet Chuck /ea. Collet φd D Range(in) L MM INCH C4016ER2 ER C4016ER4 ER C4020ER4 ER C4025ER4 ER C4032ER3 ER C4032ER5 ER C4040ER4 ER CAT50 ER Collet Chuck /ea. C5016ER4 ER C5016ER6 ER C5020ER4 ER C5020ER6 ER C5025ER4 ER C5032ER4 ER C5032ER6 ER C5040ER4 ER C5040ER6 ER HSK HOLDER / ER HOLDER SK 40 ER Collet Chuck Collet φd D Range L MM INCH (mm) SK40ER16-60 ER SK40ER ER SK40ER ER SK40ER20-60 ER SK40ER ER SK40ER ER SK40ER ER SK40ER25-60 ER SK40ER ER SK40ER ER SK40ER32-70 ER SK40ER ER SK40ER ER SK40ER40-80 ER SK40ER ER SK40ER ER SK 50 ER Collet Chuck SK50ER16-60 ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER SK50ER ER DIN69893A DIN6499 HRC ,000RPM \ G6.3 HSK-A63-ER & Specifi cation A (mm) A(in) D(mm) LIST PRICE HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A63-ER HSK-A100-ER & Specifi cation A(mm) A(in) D (mm) LIST PRICE HSK-A100-ER HSK-A100-ER HSK-A100-ER HSK-A100-ER HSK-A100-ER HSK-A100-ER HSK-A100-ER HSK-A100-ER HSK-A100-ER HSK-A100-ER BT40 ER Collet Chuck /ea. D D Range(in) L B4016ER2 ER B4020ER2 ER B4025ER5 ER B4032ER3 ER B4040ER3 ER

155 CNC Tooling System EndMill Holder End Mill Holder CAT40 End Mill Holder /ea. d (in.) L(in) C4001EM1.125 ( 1/8 ) 1.75 C4018EM1.188 ( 3/16 ) 1.75 C4018EM2.188 ( 3/16 ) 2.50 C4025EM1.250 ( 1/4 ) 1.75 C4025EM2.250 ( 1/4 ) 2.50 C4031EM1.312 ( 5/16 ) 1.75 C4037EM1.375 ( 3/8 ) 1.75 C4037EM2.375 ( 3/8 ) 2.50 C4043EM1.438 ( 7/16 ) 1.75 C4050EM1.500 ( 1/2 ) 1.75 C4050EM2.500 ( 1/2 ) 2.62 C4056EM1.562 ( 9/16 ) 1.75 C4062EM1.625 ( 5/8 ) 1.75 C4062EM3.625 ( 5/8 ) 3.00 C4075EM1.750 ( 3/4 ) 1.75 C4075EM3.750 ( 3/4 ) 3.00 C4087EM1.875 ( 7/8 ) 1.75 C4087EM3.875 ( 7/8 ) 3.50 C4010EM ( 1 ) 1.75 C4010EM ( 1 ) 3.00 C4010EM ( 1 ) 4.00 C4012EM ( 1 1/4 ) 2.00 C4012EM ( 1 1/4 ) 4.00 C4015EM ( 1 1/2 ) 4.00 CAT50 End Mill Holder /ea. d (inch) L C5018EM2.188 ( 3/16 ) 2.50 C5025EM2.250 ( 1/4 ) 2.50 C5031EM2.312 ( 5/16 ) 2.50 C5037EM2.375 ( 3/8 ) 2.50 C5043EM2.438 ( 7/16 ) 2.62 C5050EM2.500 ( 1/2 ) 2.62 C5056EM2.562 ( 9/16 ) 2.62 C5062EM3.625 ( 5/8 ) 3.75 C5075EM3.750 ( 3/4 ) 3.75 C5087EM3.875 ( 7/8 ) 3.75 C5010EM ( 1 ) 4.00 C5012EM ( 1 1/4 ) 4.00 CAT40 End Mill Holder (Metric) /ea. d (mm) L C40M06EM C40M08EM C40M10EM C40M12EM C40M14EM C40M16EM C40M20EM C40M25EM C40M32EM BT40 End Mill Holder /ea. d (in.) L (in) d (in.) L (in) B4018EM B4075EM B4025EM B4075EM2 B4031EM B4087EM B4037EM B4010EM B4043EM B4010EM3 B4050EM B4012EM B4050EM5 B4056EM B4012EM3 B4015EM B4062EM B4062EM2 B4065EM1 SK (DIN ) End Mill Holder unit: (mm) Fig. L φd φd H1 H2 G SK40-SL M8X1.0 SK40-SL M8X1.0 SK40-SL M8X1.0 SK40-SL M10X1.0 SK40-SL M12X.5 SK40-SL SK40-SL M14X1.5 SK40-SL M16X1.5 SK40-SL M16X1.5 SK40-SL M18X2.0 SK40-SL M20X2.0 SK50-SL M8X1.0 SK50-SL M10X1.0 SK50-SL M12X1.5 SK50-SL M14X1.5 SK50-SL M16X1.5 SK50-SL M18X2.0 SK50-SL M20X2.0 SK50-SL M20X2.0 HSK (DIN 69893A) End Mill Holder unit: (mm) DIN69893A DIN1835 HRC ,000RPM \ G6.3 Fig. L φd φd H1 H2 G HSKA63SL M10X1.0 HSKA63SL M12X.5 HSKA63SL HSKA63SL M14X1.5 HSKA63SL HSKA63SL M16X1.5 HSKA63SL M18X2.0 HSKA63SL M20X2.0 HSKA100SL M10X1.0 HSKA100SL M12X1.5 HSKA100SL M14X1.5 HSKA100SL M16X1.5 HSKA100SL M18X2.0 HSKA100SL M20X2.0 HSKA100SL M20X2.0

156 CNC Tooling System Wer Tapping Holder WER Tapping Attachment WER-CAT Style Collet L D Tapping (mm) (inch) (mm) (inch) CAT40WER16L70 ER M3-M10 CAT40WER20L90 ER M3-M13 CAT40WER25L100 ER M3-M16 CAT40WER32L110 ER M3-M20 CAT50WER16L90 ER M3-M10 CAT50WER20L90 ER M3-M13 CAT50WER25L90 ER M3-M16 CAT50WER32L90 ER M3-M20 WER-BT (MAS 403)Style Collet L D Tapping (mm) (inch) (mm) (inch) BT30WER16L90 ER BT30WER20L100 ER BT40WER16L90 ER M3-M10 BT40WER20L100 ER M3-M13 BT40WER25L110 ER M3-M16 BT40WER32L120 ER M3-M20 BT50WER16L90 ER M3-M10 BT50WER20L100 ER M3-M13 BT50WER25L110 ER M3-M16 BT50WER32L120 ER M3-M20 WER-SK(DIN ) Style Collet L D (mm) (inch) (mm) (inch) SK40WER16L70 ER SK40WER20L90 ER SK40WER25L100 ER SK40WER32L110 ER SK50WER16L90 ER SK50WER20L90 ER SK50WER25L90 ER SK50WER32L100 ER WER-Side Lock Straight Type Chuck φd1 L φd2 Collet mm inch mm inch mm inch Type SL20WER ER16 SL20WER ER20 SL25WER ER16 SL25WER ER20 SL25WER ER25 SL32WER ER25 SL32WER ER32 WER-BC Straight Type Chuck φd1 L φd2 Collet mm inch mm inch mm inch Type BC20WER ER16 BC20WER ER20 BC25WER ER16 BC25WER ER20 BC25WER ER25 BC32WER ER25 BC32WER ER32

157 CNC Tooling System Retension Stud Morse Taper holder MT No. D CAT Shank Morse Taper# L D mm inch mm inch CAT30MT1L CAT30MT2L CAT30MT3L CAT40MT1L CAT40MT1L CAT40MT2L CAT40MT2L CAT40MT2L CAT40MT3L CAT40MT3L CAT40MT4L CAT50MT1L CAT50MT1L CAT50MT2L CAT50MT2L CAT50MT3L CAT50MT3L CAT50MT4L CAT50MT4L CAT50MT5L BT Shank Morse Taper# MT No. L D mm inch mm inch BT30MT1L BT30MT2L BT30MT3L BT40MT1L BT40MT1L BT40MT2L BT40MT2L BT40MT2L BT40MT3L BT40MT3L BT40MT4L BT50MT1L BT50MT1L BT50MT2L BT50MT2L BT50MT3L BT50MT3L BT50MT4L BT50MT4L BT50MT5L D L L 7/24 7/24 MTA SK (DIN ) Morse Taper Holders MT L φd No. mm inch mm inch SK30MTA SK30MTA SK30MTA SK40MTA SK40MTA SK40MTA SK40MTA SK40MTA SK40MTA SK40MTA SK50MTA SK50MTA SK50MTA SK50MTA SK50MTA SK50MTA SK50MTA SK50MTA SK50MTA SK50MTA MTA NT Morse Taper Holders MT L φd G No. mm inch mm inch NT50MTA NT50MTA NT50MTA NT50MTA UNC NT50MTA NT50MTA NT50MTA NT50MTA MTA HSK (DIN69893A) Morse Taper Holder MTA DIN2080 Morse Taper Holders MT L φd G No. mm inch mm inch DIN208040MTA M16X2.0 DIN208040MTA M16X2.0 DIN208050MTA M24X3.0 DIN208050MTA M24X3.0 DIN208050MTA M24X3.0 MT L φd No. mm inch mm inch HSKA63MTA HSKA63MTA HSKA63MTA HSKA63MTA HSKA100MTA HSKA100MTA HSKA100MTA HSKA100MTA HSKA100MTA DIN69893A DIN228-B HRC ,000RPM \ G6.3

158 CNC Tooling System Shell Mill/ TG/ Jacobs Holder Shell Mill Holder SHELL ENDMILL HOLDER for HSK Holder CAT40 Shell Mill Holder /ea. D L Drive Key Thread Lock Screw C4075SM / LS C4010SM / LS C4012SM / LS C4015SM / LS CAT50 Shell Mill Holder /ea. D L Drive Key Thread Lock Screw C5075SM / LS C5010SM / LS C5012SM / LS C5015SM / LS BT40 Shell Mill Holder /ea. D L Drive Key Thread Lock B4075SM / LS B4010SM / LS B4012SM / LS B4015SM / LS TG Collet Holder CAT40 TG Collet Chuck Collet Series D Range(in) L C4010SC CAT50 TG Collet Chuck Collet Series D Range(in) L C5010SC DIN69893A HRC ,000RPM \ G6.3 HSK-A63-FM &Specifi cation A D LIST PRICE HSK-A63-FMB HSK-A63-FMB HSK-A63-FMB HSK-A63-FMB HSK-A63-FMB HSK-A63-FMB HSK-A63-FMB HSK-A63-FMB HSK-A100-FM &Specifi cation A D LIST PRICE HSK-A100-FMB HSK-A100-FMB HSK-A100-FMB HSK-A100-FMB HSK-A100-FMB HSK-A100-FMB HSK-A100-FMB HSK-A100-FMB HSK-A63-FM &Specifi cation A D LIST PRICE HSK-A63-FMA HSK-A63-FMA HSK-A63-FMA HSK-A63-FMA HSK-A63-FMA HSK-A63-FMA HSK-A100-FM &Specifi cation A D LIST PRICE HSK-A100-FMA HSK-A100-FMA HSK-A100-FMA HSK-A100-FMA HSK-A100-FMA HSK-A100-FMA HSK-A100-FMA HSK-A100-FMA HSK HOLDER / KPU DRILL CHUCK HOLDER HSK HOLDER / TEST BAR BT40 TG Collet Chuck Collet Series D Range L B4010SC Jacobs Taper Holder CAT40 Jacobs Taper Holder /ea. Jacobs Taper D (inch) L (inch) C4020JT C4033JT C4003JT C4004JT C4006JT DIN69893A DIN ,000RPM \ G6.3 HSK-A63-KPU HRC58-60 &Specifi cation A D LIST PRICE HSK-A63-KPU HSK-A100-KPU &Specifi cation A D LIST PRICE HSK-A100-KPU DIN69893A HRC58-60 HSK-A63-TB & Specifi cation A D LIST PRICE HSK-A63-TB HSK-A100-TB & Specifi cation A D LIST PRICE HSK-A100-TB

159 CNC Tooling System Retension Stud Retention Stud CAT Style H: w/ Coolant Hole Taper N D L1 L Flange A (in) (in) (in) (in) Thick. C CAT-40 5/ C CAT-40 5/ C404501H CAT-40 5/ C CAT-40 5/ C404502H CAT-40 5/ C C404503H C C404504H C CAT-40 5/ C406000H CAT-40 5/ C CAT-40 5/ C409000H CAT-40 5/ C CAT-40 5/ C404500H CAT-40 5/ C CAT-40 5/ C407500H CAT-40 5/ C407551H CAT-40 5/ C CAT C504501H CAT C CAT C506000H CAT C CAT N/A 90 C509000H CAT C C504500H CAT Retention Stud JIS B6339 Retention Stud DIN69872 BT Style (Metric Thread) H: w/ Coolant Hole Taper N D L1 L Flange A (in) (in) (in) (in) Thick. B BT-30 M B BT-30 M B BT-35 M B BT-35 M B BT-35 M B BT-40 M B404500H BT-40 M B BT-40 M B406000H BT-40 M B BT-40 M B409000H BT-40 M B BT-40 M B BT-40 M B BT-40 M B407500H BT-40 M B407501H BT-40 M B BT-45 M B BT-45 M B BT-45 M B BT-50 M B504500H BT-50 M B BT-50 M B506000H BT-50 M B BT-50 M B509000H BT-50 M L L1 φd1 φd2 φd3 φd4 φd5 θ G SW JISB P M16 19 JISB P M24 30 JISB PA M16 19 JISB PA M24 30 JISB PB M16 18 JISB PB M24 30 L L1 φd1 φd2 φd3 φd4 φd5 θ G SW DIN69872S-SK M16 19 DIN69872S-SK M24 30 Retention Stud MAZAK-BT L L1 φd1 φd2 φd3 φd4 φd5 θ G SW MAZAK-BT M16 19 MAZAK-BT M24 30 Retention Stud MTB Fig. L L1 φd1 φd2 φd3 φd4 θ G SW MTB-BT M12 13 MTB-BT M16 19 MTB-SK M16 19

160 CNC Tooling System Face/ End Mill S45SE12 SHELL END MILLS SP4000 FACE MILLS Inserts are not included MODEL D H d2 d d I No. (mm) (inch) 50A04R-S45SE A05R-S45SE B06R-S45SE B06R-S45SE / B07R-S45SE /2 7 Inserts are not included MODEL D H d d I No. (mm) (inch) R L SP4080R/L SP4100R/L /4 6 SP4125R/L /4 8 SP4160R/L SP4200R/L /8 14 SP4250R/L /8 16 SP4315R/L /8 18 SP4360R/L /8 20 SPC4000 FACE MILLS NSP4000 FACE MILLS Inserts are not included MODEL D H d d I No. (mm) (inch) SPC SPC SPC SPC /4 6 SF50000 FACE MILLS Inserts are not included MODEL D H d d I No. (mm) (inch) NSP4080R NSP4100R /4 6 NSP4125R /4 8 NSP4160R NSP4200R /8 14 NSP4250R /8 16 NSP4315R /8 18 NSP4360R /8 20 SP5000 FACE MILLS Inserts are not included MODEL D D1 H d d I No. (mm) (inch) R L SF5063R/L SF5080R/L SF5100R/L /4 6 SF5125R/L /4 6 SF5160R/L SN4000 FACE MILLS Inserts are not included MODEL D H d d I No. (mm) (inch) SP5080R SP5100R /4 5 SP5125R /4 6 SP5160R SP5200R /8 10 SP5250R /8 12 SP5315R /8 14 SP5360R /8 16 MKR-SP4-15 FACE MILLS Inserts are not included MODEL D H d d I No. (mm) (inch) R L SN4080R/L SN4100R/L /4 6 SN4125R/L /4 8 SN4160R/L SN4200R/L /8 14 SN4250R/L /8 16 SN4315R/L /8 18 SN4360R/L /8 20 Inserts are not included MODEL D H d d I No. (mm) (inch) MKR63-SP ,6 MKR80-SP ,8 MKR100-SP /4 8,10 MKR125-SP /2 10,12 MKR160-SP ,14 MKR200-SP /8 16,18

161 MKR-SP4-45 FACE MILLS SE445 FACE MILLS CNC Tooling System Face/ End Mill STP4000 FACE MILLS Inserts are not included MODEL D H d (mm) d (in) I No. MKR63-SP , 6 MKR80-SP , 8 MKR100-SP /4 MKR125-SP /2 8, 10 10, 12 MKR160-SP , 14 MKR200-SP /8 SE545 FACE MILLS 16, 18 Inserts are not included MODEL D H d (mm) d (in) I No. SE445R SE445R SE445R /4 5 SE445R /2 6 SE445R SE445R /8 10 SE445R /8 12 SE445R /8 14 SE445R /8 16 SE445R SE445R /4 7 SE445R /2 9 SE445R SE445R /8 14 SE445R /8 18 SE445R /8 22 SE445R /8 26 Inserts are not included MODEL D H d (mm) d (in) I No. STP4100R /4 6 STP4125R /2 8 STP4160R STP4200R /8 14 STP4250R /8 16 STP4315R /8 18 STP4360R /8 20 MTP4000 FACE MILLS Inserts are not included MODEL D H d (mm) d (in) I No. SE545R SE545R /4 5 SE545R /2 6 SE545R SE545R /8 10 SE545R /8 12 SE545R /8 14 SE545R /8 16 SE545R /4 7 SE545R /2 9 SE545R SE545R /8 14 SE545R /8 18 SE545R /8 22 SE545R /8 26 MTE4000 FACE MILLS Inserts are not included MODEL D H d (mm) d (in) I No. MTE4080R MTE4100R /4 5 MTE4125R /4 6 MTE4160R MTE4200R /8 12 Inserts are not included MODEL D H d (mm) d (in) I No. MTP4080R MTP4100R /4 6 MTP4125R /4 8 MTP4160R MTP4200R /8 14 MTP4250R /8 16 MTP4315R /8 18 MTP4360R /8 20 MS00T22S SHELL END MILLS MS00S SHELL END MILLS MS00T SHELL END MILLS Inserts are not included Inserts are not included MODEL D H d d I No. (mm) (inch) MS50S /8 3 MS63S MS75S MS100S /4 6 Inserts are not included MODEL D H d d I No. (mm) (inch) MS50T /8 3 MS63T MS75T MS100T /4 6 MODEL D H d (mm) d (in) I No. MS63T22S MS80T22S MS100T22S /4 5 MS125T22S /2 6

162 Machine Shop Supply Collet, Drill Chuck GROMAX CNC Keyless Drill Chuck with Shank The shank and keyless drill chuck are combined as one body and prevent falling out as heavy cutting; Prevent from falling out with instant spindle stop; Short and compact design BT NT 100% Inspection for Run Out Accuracy Cap. D L Runout (inch) 1/16-5/ /64-1/ /8-5/ GROMAX Super AccurateKeyless Drill Classic Plus Keyless Drill Chuck w/ R8 Integral Shank INT13C.R8 0~1/2,3.2 Lbs INT16C.R8 1/8~5/8,3.2 Lbs CP130-R8 1/32 ~1/2 (1mm~13mm) 2.6 Lbs, 7000rpm CAT Mounting Taper K inch A D BT / / /8-5/ /8-5/ NT / / /8-5/ /8-5/ CAT / / /8-5/ / /8-5/ Wrench-Lock CNC Drill Chuck BT Max inch mm rpm WL130BT40 1/32-1/2 1~ WL160BT40 1/16~5/8 1.5~ WL160BT50 1/16~5/8 1.5~ CAT WL130CAT4 1/32-1/2 1~ WL160CAT4 1/16~5/8 1.5~ WL160CAT5 1/16~5/8 1.5~ Classic Keyless Drill Chucks Keyless Drill Chucks with Diamond-Coated Jaws Max inch mm rpm CD30-J0 0~1/8 0~ CD30-J1 0~1/8 0~ CD65-J1 0~1/4 0~ CD130-J33 1/32-1/2 1~ CD130-J6 1/32~1/2 1~ Stainless Steel Keyless Drill Chuck CS30-3/8 0~1/8 0~ CS50-3/8 1/32~1/ Stainless Steel Diamond Coated A) Spanner Wrench Type Special design & manufacture against for super heavy torque use. When tightened the chuck, you can double the torque by using spanner wrench than by hand. Mount. Wt. Taper Lbs J0 0-1/ J1 0-1/ J1 0-5/ J33 0-3/ J2 0-3/ J6 0-1/ J33 0-1/ Optional J6 1/8-5/ B) Uni-Body Type Extremely rigid construction; Minimize the accumulative tolerances; Prevent the drill chucks from falling out; Extremely safe in operation Mount. Wt. Taper Lbs INT8C.JC20 JC20 0-5/ INT8C.MT2 MT2 0-5/ INT8C.JC3/4 JC-3/4 0-5/16 INT13C.R8 R8 0-1/ INT13C.JC25 JC25 0-1/ INT13C.MT2 MT2 0-1/ INT13C.MT3 MT3 0-1/ INT13C.MT4 MT4 0-1/ INT13C.JC3/4 JC-3/4 0-1/ INT13C.JC1 JC-1 0-1/ INT13C.JC1-1/4 JC-1 1/4 0-1/ INT16C.R8 R8 1/8-5/ INT16C.MT3 MT3 1/8-5/ INT16C.JC3/4 JC-3/4 1/8-5/ INT16C.JC1 JC-1 1/8-5/ INT16C.JC1-1/4 JC-1 1/4 1/8-5/ Precision Drill Chuck Classic Keyless Drill Chuck (Tapered Mount) JC20/25 20 or 25mm straight shank Max. Wt Blind Hole Through Hole inch rpm lbs 0-1/16 50, C15-J0 CH15-J0 0-1/8 35, C30-J0 CH30-J0 0-1/8 35, C30-J1 CH30-J1 0-3/16 25, C50-J1 CH50-J1 0-1/4 20, C65-J1 CH65-J1 0-5/16 15, C80-J2 CH80-J2 0-3/8 12, C100-J33 CH100-J33 0-3/8 12, C100-J2 CH100-J2 1/32-1/2 7, C130-J33 CH130-J33 1/32-1/2 7, C130-J2 CH130-J2 1/32-1/2 7, C130-J6 CH130-J6 1/8-5/8 4, C160-J6 CH160-J6 MT2/3/4

163 ER Type Collet Chuck System Shank Set China Taiwan GTER8A R8 8 PCS GTER8B MT#3 8 PCS GTER8C MT#4 8 PCS GTER8D MT#5 8 PCS GTER8E NT30 8 PCS GTER8F NT40 8 PCS GTER8G NT50 8 PCS GTER15A R8 15 PCS GTER15B MT#3 15 PCS GTER15C MT#4 15 PCS GTER15D MT#5 15 PCS GTER15E NT30 15 PCS GTER15F NT40 15 PCS GTER15G NT50 15 PCS Description: GTER8 (8 pcs set):1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1 GTER15 (15 pcs set): 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Drill Chuck Shank A) MT Shanks Taper Shank B) Straight Shanks J Taper Straight Shank Wide holding range; Accuracy to.0001 ; Unique self-releasing system; High precision collet chuck system suitable for all milling and drilling applications; Kit includes chuck holder and wrench; Hardwood case is included Quality Import GROMAX Heavy Duty Ball Bearing Drill Chuck Suitable for heavy duty use; All parts are hardened by heat treatment and precision ground; Super clamping power Mount. Wt. Taper Lbs BB12006 J6 1/32-1/2 3 BB12033 J33 1/32-1/2 4 BB12003 J3 1/32-5/8 5 BB12002 J2 1/32-3/8 5 BB12005 J5 3/ GROMAX Electric Drill Chucks Key Type Quality Import Shank Taper MT. MT0 J0 / / AM0J0 MT0 J1 / / AM0J1 MT1 J0 / / AM1J0 MT1 J1 / / AM1J1 MT1 J AM1J2 MT1 J33 / / AM1J33 MT1 J6 / / AM1J6 MT2 J0 / / AM2J0 MT2 J AM2J1 MT2 J AM2J2 MT2 J / / MT2 J AM2J33 MT2 J / / MT2 J AM2J6 MT3 J1 / / AM3J1 MT3 J2 / / AM3J2 MT3 J / / MT3 J AM3J33 MT3 J / / MT3 J AM3J6 MT4 J2 / / AM4J2 MT4 J AM4J33 MT4 J / / MT4 J AM4J6 MT5 J6 / / AM5J6 Taper dia. 3/8 J A38J0 3/8 J A38J1 3/8 J / / 1/2 J A12J0 1/2 J A12J1 1/2 J A12J2 1/2 J A12J33 1/2 J A12J6 5/8 J1 / / A58J1 5/8 J2 / / A58J2 5/8 J33 / / A58J33 5/8 J6 / / A58J6 3/4 J A34J1 3/4 J A34J2 3/4 J A34J6 1 J2 / / A1J2 1 J / / 1 J A1J33 1 J A1J6 For electric drill, super gripping power; Quick releasing of drill bits and not slip when drilling cement; Adopt alloy steel; durable for impact & friction; Lasted for long time. Keyless Type Type Female Wt. Thread Lbs Keyless 3/8 x24unf 1/16-3/ type 1/2 x20unf 1/32-1/ /8 x16unf 1/8-5/ Key type 3/8 x24unf 1/32-3/ /2 x20unf 3/64-1/2 1.0 Tool Setting Stand Holder Type Prrice 7852 BT30/CAT BT40/CAT BT50/CAT50 C) R8 Shanks Machine Shop Supply Collet, Drill Chuck Range /8 ~ 3/4 By 8THS 6pcs R8 Collet set /8 ~ 3/4 By 16THS 11pcs R8 Collet set /16 ~ 3/4 By 32NDS 23pcs R8 Collet set /8 ~ 1 By 8THS 8pcs 5C Collet set /16 ~ 1-1/16 By 16THS 17pcs 5C Collet set /16 ~ 1-1/16 By 32NDS 33pcs 5C Collet set S 1/16 ~ 1-1/16 By 64THS 65pcs 5C Collet set R8 & 5C COLLET SET 5C R8 Made of high-test grade steel Precision ground to close tolerance Range # Of Collet R8-1 1/8 ~ 3/4 By 8THS 6 R8-2 1/8 ~ 3/4 By 16THS 11 R8-3 1/16 ~ 3/4 By 32NDS 23 5C-1 1/8 ~ 3/4 By 8THS 6 5C-3 1/16 ~ 1-1/16 By 16THS 17 5C-4 1/16 ~ 1-1/16 By 32NDS 33 5C-69 1/16 ~ 1-1/8 By 64NDS 69 Pro Quality 5C Round Collet Set T.I.R.< C-15P 1/8 ~ 1 By 64NDS 15 HSK HOLDER / TOOL LOCKING FIXTURE Quality Import Shank Taper R8 R8 J1 / / AR8J1 R8 J2 R8002 AR8J2 R8 J3 R8003 / / R8 J33 R8033 AR8J33 R8 J6 R8006 AR8J6 Lyndex R8 & 5C Collet Set HSK-A63-ETL &Specifi cation LIST PRICE HSK-A63-ETL HSK-A100-ETL &Specifi cation LIST PRICE HSK-A100-ETL Tool Locking fixture Holder Type ETL-30 BT30/CAT30 ETL-40 BT30/CAT30 ETL-50 BT30/CAT30 Taper Shank

164 ATTENTION: Machine Shop Supply Buyer Tool & Die / Mold Shop Foremen Toolroom Manager Purchasing Personnel From: Gromax Enterprises Corp. To: * All prices and specifications subject to change without notice. New! Angle Head Hydraulic Holder Shrink Fit Holder HSK Holder for Turning Mills and More...