14.5 Tonne Excavator.

Transcription

1 14.5 Tonne Excavator

2 Versatility = More Profit A growing problem for many operators is the struggle between give me maximum capacity and heavier muscle and make it safer with the ability to work in confined areas. The ECR145CL is the short swing radius excavator that you want!. Short Swing Radius The performance of a conventional excavator with the flexibility you want from a short swing radius. Used in open areas and confined jobsites for greater versatility. Counterweight swing radius extends over the track width by less than 10%. Volvo Care Cab Comfort Rounded cab shape is roomy for the operator, yet designed to compactly stay inside the counterweight swing radius. High-capacity climate control system: operator comfort from cab floor to ceiling. Work Where The Profits Are! Operate in or next to streets with minimal traffic disruption. 650 mm 2' 2" 1,980 mm 6' 6" 1,475 mm 4' 10" 655 mm 2' 2" More safety next to buildings, people or other site obstructions: less risk of machine damage. Fewer restrictions/permits: more job opportunities. Never short on performance A heavy counterweight and excellent center of gravity. The short swing radius machine with classleading stability. (mm) * 2.5 m 8' 2" arm, 600 mm 24" shoe 7"

3 Specifications 14.5 Tonne Excavator Engine The Volvo diesel engine delivers lower emissions, along with superior performance and fuel efficiency. The EPA Tier 3 compliant engine uses precise, highpressure fuel injectors, turbo charger and air to air intercooler and electronic engine controls to optimize machine performance. Engine Volvo D4E EAE3 Max. power, at 33 r/s 2,000 r/min Net (ISO 9249, S AE J1349) 69 kw 92 hp Gross (SAE J1995) 80 kw 107 hp Max. torque at 1,600 r/min 472 Nm 354 lb.ft No. of cylinders 4 Displacement 4.0 l 246 cu.in Bore 101 mm 3.98" Stroke 126 mm 4.96" Electrical system High-capacity electrical system that is well protected. Waterproof double-lock harness plugs are used to secure corrosion-free connections. The main relays and solenoid valves are shielded to prevent damage. The master switch is standard. Voltage Batteries Battery capacity 24 V 2 x 12 V 100 Ah Alternator 28 V / 80 A Service refill capacities Fuel tank 220 l 58 gal Hydraulic system, total 210 l 55 gal Hydraulic tank 85 l 22 gal Engine oil 15.5 l 4 gal Engine coolant 21.3 l 6 gal S wing reduction unit 3.8 l 1.0 gal Travel reduction unit 2 x 3.5 l 2 x 0.9 gal S wing system The swing system uses an axial piston motor, driving a planetary gearbox for maximum torque. An automatic holding brake and anti-rebound valve are standard. Max. swing speed Max. swing torque 11.6 r/min 41.9 knm Drive Each track is powered by an automatic two-speed shift travel motor. Track brakes are multi-disc, spring-applied and hydraulically released. The travel motor, brake and planetary gears are well protected within the track frame. Max. drawbar pull 119 kn 27,120 lb Max. travel speed 3.0/5.5 km/h Gradeability 1.9/3.4 mph 35 o 70% Undercarriage The undercarriage has a robust X-shaped frame. Greased and sealed track chains are standard. Track pads 2 x 46 Link pitch mm 6.8" Shoe width, 500/600/700/750 mm triple grouser 20"/24"/28"/30" Shoe width, rubber pad 500 mm 20" Bottom rollers 2 x 7 Top rollers 2 x 1 Hydraulic system The hydraulic system, also known as the Integrated work mode control is designed for high-productivity, high-digging capacity, high-maneuvering precision and excellent fuel economy. The summation system, boom, arm and swing priority along with boom, arm and bucket regeneration provides optimum performance. The following important functions are included in the system: Summation system: Combines the flow of both hydraulic pumps to ensure quick cycle times and high productivity. Boom priority: Gives priority to the boom operation for faster raising when loading or performing deep excavations. Arm priority: Gives priority to the arm operation for faster cycle times in leveling and for increased bucket filling when digging. Swing priority: Gives priority to swing functions for faster simultaneous operations. Regeneration system: Prevents cavitation and provides flow to other movements during simultaneous operations for maximum productivity. Power boost: All digging and lifting forces are increased. Holding valves: Boom and arm holding valves prevent the digging equipment from creeping. Main pump: Type: 2 x variable displacement axial piston pumps Maximum flow: 2 x 118 l/min 2 x 31 gpm Pilot pump: Type: Gear pump Maximum flow: 1 x 20 l/min 1 x 5.3 gpm Hydraulic motors: Travel: Variable displacement axial piston motor with mechanical brake S wing: Fixed displacement piston motor with mechanical brake Relief valve setting: Implement /34.3 MPa ,690/4,980 psi Travel circuit MPa 4,980 psi S wing circuit MPa 3,840 psi Pilot circuit MPa 570 psi Hydraulic cylinders: Mono boom 2 Bore x Stroke ø105 x 1,055 mm ø4.1 x 41.5" Arm 1 Bore x Stroke ø120 x 1,045 mm ø4.7 x 41.1" Bucket 1 Bore x Stroke ø100 x 865 mm ø3.9 x 34.1" Dozer Blade 2 Bore x Stroke ø130 x 270 mm ø5.1 x 10.6" Cab Purpose-designed, rounded, short radius Volvo Care Cab with no sacrifice to operator comfort. Audio system with remote control. C up holders. 3 high-capacity outlets. Independently adjustable joystick consoles. Excellent all around-visibility provided through maximum cab glass, transparent roof hatch and 2-piece sliding door window. The lift-up front windshield can easily be secured at the ceiling and the removable lower front glass can be stored inside the cab. Interior lighting consists of one reading light and one cab light with timer. The pressurized and filtered cab air is supplied by an 8-vent climate-control system, providing fast defrosting and high cooling and heating performance. Viscous/spring-mounted suspension cushions operator from vibrations. Deluxe seat with adjustable height, tilt, recline, forward-back settings, retractable seat belt and selectable horizontal suspension for reduced whole body vibration. Adjustable easy-to-read 16.3 cm (6.4") LCD color monitor provides real time information of machine functions, important diagnostic information and a wide variety of work tool settings. LCD monitor is switchable to rear-view camera monitor (option). Sound Level: Sound level in cab according to ISO LpA 72 db(a) External sound level according to ISO 6395 and EU Directive 2000/14/EC LwA 100 db(a)

4 Specifications 14.5 Tonne Excavator GROUND PRESSURE ECR145CL with, 2.5 m, 8' 2" arm, 419 kg, 920 lb bucket, 3,350 kg, 7,390 lb counterweight Description Shoe width Operating weight Ground pressure Overall width Triple grouser 500 mm, 20" 14,760 kg, 32,550 lb 44.1 kpa, 6.4 psi 2,490 mm, 8' 2" 600 mm, 24" 14,955 kg, 32,980 lb 37.3 kpa, 5.4 psi 2,590 mm, 8' 6" 700 mm, 28" 15,150 kg, 33,410 lb 32.4 kpa, 4.7 psi 2,690 mm, 8' 10" 750 mm, 30" 15,350 kg, 33,850 lb 30.4 kpa, 4.4 psi 2,740 mm, 9' 0" Rubber Shoe 500 mm, 20" 14,820 kg, 32,680 lb 44.1 kpa, 6.4 psi 2,490 mm, 8' 2" ECR145CL with dozer blade,, 2.5 m, 8' 2" arm, 419 kg, 920 lb bucket, 3,100 kg, 6,900 lb counterweight Description Shoe width Operating weight Ground pressure Overall width 500 mm, 20" 15,420 kg, 34,000 lb 46.1 kpa, 6.7 psi 2,490 mm, 8' 2" Triple grouser 600 mm, 24" 15,620 kg, 34,440 lb 39.2 kpa, 5.7 psi 2,590 mm, 8' 6" 700 mm, 28" 15,820 kg, 34,880 lb 33.3 kpa, 4.8 psi 2,690 mm, 8' 10" Rubber Shoe 500 mm, 20" 15,470 kg, 34,110 lb 46.1 kpa, 6.7 psi 2,490 mm, 8' 2" MAX. PERMITTED BUCKETS Note: 1. Bucket size based on ISO 7451, heaped material with a 1:1 angle of repose. 2. Max. permitted sizes are for reference only and are not necessarily available from the factory. 3. Bucket widths are less than bucket's tip radius. ECR145CL with direct fit bucket, 3,350 kg, 7,390 lb counterweight Description Max. bucket volume / weight GP bucket 1.5 t/m 3, 2,530 lb/yd 3 l / kg 875 / / / 550 yd 3 /lb 1.14 / 1, / 1, / 1,210 GP bucket 1.8 t/m 3, 3,030 lb/yd 3 l / kg 775 / / / 500 yd 3 /lb 1.01 / 1, / 1, / 1,100 ECR145CL with quick fit bucket, 3,350 kg, 7,390 lb counterweight Description Max. bucket volume / weight GP bucket 1.5 t/m 3, 2,530 lb/yd 3 l / kg 800 / / / 500 yd 3 /lb 1.05 / 1, / 1, / 1,100 GP bucket 1.8 t/m 3, 3,030 lb/yd 3 l / kg 700 / / / 450 yd 3 /lb 0.92 / 1, / 1, / 990

5 DIMENSIONS K D A L C E J I ECR145CL Description F G H B A. Overall width of upper structure mm, ft-in 2,490, 8' 2" 2,490, 8' 2" 2,490, 8' 2" B. Overall width mm, ft-in 2,590, 8' 6" 2,590, 8' 6" 2,590, 8' 6" C. Overall height of cab mm, ft-in 2,855, 9' 4" 2,855, 9' 4" 2,855, 9' 4" D. Tail swing radius mm, ft-in 1,475, 4' 10" 1,475, 4' 10" 1,475, 4' 10" E. Counterweight clearance * mm, ft-in 900, 2' 11" 900, 2' 11" 900, 2' 11" F. Tumbler length mm, ft-in 3,040, 10' 0" 3,040, 10' 0" 3,040, 10' 0" G. Track length mm, ft-in 3,750, 12' 4" 3,750, 12' 4" 3,750, 12' 4" H. Track gauge mm, ft-in 1,990, 6' 6" 1,990, 6' 6" 1,990, 6' 6" I. Shoe width mm, ft-in 600, 24" 600, 24" 600, 24" J. Min. ground clearance * mm, ft-in 430, 1' 5" 430, 1' 5" 430, 1' 5" K. Overall length mm, ft-in 7,400, 24' 3" 7,405, 24' 4" 7,345, 24' 1" L. Overall height of boom mm, ft-in 2,700, 8' 10" 2,865, 9' 5" 3,270, 10' 9" * Without shoe grouser BOOM Description 4.6 m, 15' 1" Length mm, ft-in 4,770, 15' 8" Height Height mm, ft-in 1,370, 4' 6" ARM Length Width mm, ft-in 545, 1' 9" Weight kg, lb 1,127, 2,490 * Includes arm cylinder, piping and pin Description 2.1 m, 6' 11" 2.5 m, 8' 2" 3.0 m, 9' 10" Height Length mm, ft-in 2,790, 9' 2" 3,195, 10' 6" 3,690, 12' 1" Height mm, ft-in 680, 2' 3" 675, 2' 3" 750, 2' 6" Width mm, ft-in 275, 0' 11" 275, 0' 11" 275, 0' 11" Length Weight kg, lb 560, 1, , 1, , 1,500 FRONT DOZER BLADE * Includes bucket cylinder, linkage and pin Description Measurement A. Height mm, ft-in 580, 1' 11" A B Width mm, ft-in 2,490, 8' 2" Weight kg, lb 450, 990 B. Lift height mm, ft-in 590, 1' 11" C C. Digging depth mm, ft-in 570, 1' 10"

6 WORKING RANGES & DIGGING FORCE (ft) 35 (m) A B H F G C D E (m) (ft) ECR145CL 2.44 m, 8' Machine with pin-on bucket A. Max. digging reach mm, ft-in 7,990, 26' 3" 8,360, 27' 5" 8,850, 29' 0" B. Max. digging reach on ground mm, ft-in 7,840, 25' 9" 8,215, 26' 11" 8,715, 28' 7" C. Max. digging depth mm, ft-in 5,140, 16' 10" 5,540, 18' 2" 6,040, 19' 10" D. Max. digging depth (8' level) mm, ft-in 4,890, 16' 1" 5,325, 17' 6" 5,860, 19' 3" E. Max. vertical wall digging depth mm, ft-in 3,855, 12' 8" 4,225, 13' 10" 4,775, 15' 8" F. Max. cutting height mm, ft-in 9,080, 29' 9" 9,400, 30' 10" 9,845, 32' 4" G. Max. dumping height mm, ft-in 6,540, 21' 5" 6,865, 22' 6" 7,300, 23' 11" H. Min. front swing radius mm, ft-in 1,800, 5' 11" 1,980, 6' 6" 2,335, 7' 8" Digging forces with direct fit bucket Bucket radius mm, ft-in 1,270, 4' 2" 1,270, 4' 2" 1,270, 4' 2" Breakout force - bucket (Normal/Power boost) Tearout force - arm (Normal/Power boost) SAE J1179 ISO 6015 SAE J1179 ISO 6015 kn lb kn lb kn lb kn lb 80.8 / ,170 / 19, / ,460 / 21, / ,660 / 16, / ,050 / 17, / ,170 / 19, / ,460 / 21, / ,980 / 14, / ,270 / 15, / ,170 / 19, / ,460 / 21, / ,440 / 13, / ,660 / 13,430 Rotation angle, bucket deg

7 1 Other Products Available: Air Compressors Lighting Towers Generators Traffic Products VMS & Video Boards Specialised Air Fuel Supply & Equipment Hire

8 HEAD OFFICE - SYDNEY 26 Clay Place, Eastern Creek NSW 2766 Ph: (02) Fax: (02) NEW SOUTH WALES SYDNEY 2 Clay Place, Eastern Creek NSW 2766 Ph: 1300 WE HIRE TRAFFIC DIVISION 46 Huntingwood Drive, Huntingwood, NSW 2148 Ph: (02) NEWCASTLE 8/14 Yangan Place, Beresfield NSW 2322 Ph: (02) WOLLONGONG Five Islands Road, Port Kembla NSW 2505 Ph: (02) PARKES 2-10 Alluvial Street, Parkes NSW 2870 Ph: (02) AUSTRALIAN CAPITAL TERRITORY CANBERRA 68 Yass Rd, Queanbeyan NSW 2620 Ph: QUEENSLAND BRISBANE 46 Colebard St East, Archerfield, QLD 4110 Ph: (07) GLADSTONE 25 Roseanna St, Gladstone QLD 4680 Ph: (07) CHINCHILLA 249 Zeller Street, Chinchilla QLD 4413 Ph: (07) TOOWOOMBA 22 Rocla Court, Toowoomba QLD 4350 VICTORIA MELBOURNE 73 Radnor Drive, Deer Park VICTORIA 3023 Ph: (03) SOUTH AUSTRALIA ADELAIDE 7 Mill Court Kilburn SA 5084 Ph: Our Commitment is your insurance