Power Generation for the 21st Century
|
|
- Sophia Lynch
- 6 years ago
- Views:
Transcription
1 Power Generation for the 21st Century Generator Ratings: kw 118 to 2370 (60 Hertz) kva 136 to 2400 (50 Hertz) ISO 9002 Certified A Subsidiary of Regal-Beloit Corporation
2 innovation, Since its market introduction, Marathon Electric s MAGNAMAX DVR has been a technology leader and proven performer. The MAGNAMAX DVR generator line offers as standard a permanent magnet generator excitation system with the industry s first digital voltage regulator. Each MAGNAMAX DVR features the exclusive DVR 2000 digital voltage regulator providing.25% regulation and three phase RMS sensing. These outstanding features make MAGNAMAX DVR the ideal generator for voltage critical applications such as: Telecommunication Networks Hospitals Airports Commercial Buildings Computer Centers
3 performance, reliability... A proven, top performer in every respect, the MAGNAMAX DVR generator is a result of Marathon Electric s fifty years of generator experience and an intensive product development program using cutting edge technology. Inherent to the MAGNAMAX DVR design is exceptional transient performance and strong motor starting capability. MAGNAMAX DVR meets the demands of today s changing market offering reliability and remarkable performance. The MAGNAMAX DVR supports a variety of non-linear loads. Typical non-linear loads include UPS systems and variable frequency drives. MAGNAMAX DVR provides unprecedented voltage regulation in the presence of harmonic distortion caused by non-linear loads. Furthermore, the MAGNAMAX DVR low reactance design minimizes the harmonic voltage distortion caused by these loads. Constructed for extended life, MAGNAMAX DVR utilizes Marathon s exclusive unirotor construction, superior class H insulation, and long life bearings. Easy access and serviceability combined with Marathon Electric s commitment to long term support make MAGNAMAX DVR the ideal choice for extended life applications. Product F e a t u r e s Permanent Magnet Generator... ensures 300% short circuit current during fault conditions and provides the regulator with input power isolated from load distortions. Unirotor Construction... incorporates single piece rotor laminations, a die cast rotor core and ammortiseur windings into an integrated rotor assembly. The field winding is wet layer wound to the rotor assembly with thermo setting epoxy for high mechanical and electrical integrity. Digital Voltage Regulator... is encapsulated for reliable performance in all environments. The DVR 2000 includes voltage regulation to.25%, three phase RMS sensing, adjustable volts/hertz underspeed protection, advanced engine unloading algorithms, integrated paralleling capabilities, and over-excitation/over-voltage protection. A VAR-PF controller is available as an optional feature. Large Conduit Box... provides ample space for easy connections and allows load line access from all sides, top, or bottom. Exciter and PMG Mounting... provides easy access and serviceability. The PMG is mounted external to the generator bearing. The exciter is externally mounted on 570 and 740 frame generators. Class H Insulation System... utilizes an unsaturated polyester varnish for optimal insulation life and superior moisture protection. A tropical insulation is added for increased environmental protection. A vacuum pressure impregnated insulation system is an available option. Shielded Heavy-Duty Bearings... resist contamination and give a minimum B-10 life of 40,000 hours. Regreasing provisions are available on all generators. Enhanced Ventilation... created by a high efficiency fan and optimized internal air flow patterns, maximizes heat transfer and minimizes hot spot differentials for extended winding life. Fully Guarded... for operator safety and generator protection, no rotating or electrically energized parts are exposed. All openings are covered by louvers or screens. Optimized Windings... provide low reactances and exceptional motor starting capability. The stator windings utilize a 2/3 pitch to minimize harmonic distortion and facilitate parallel operation. Design Specs and Agency Approvals... are important at Marathon. All MAGNAMAX DVR units meet NEMA MG1-22, BS5000, CSA C22.2, IEC 34-1 and VDE 0530 requirements. Marine versions are available to meet American Bureau of Shipping, Lloyds, Det Norske Veritas, or Nippon Kaiji Kyokai requirements.
4 kw 60 Hertz Three Phase, Low Voltage 4, 10 and 12 Leads 1800 RPM kw Continuous Duty ❶ kw Standby Duty ❶ Model Class B 80 C Class F 105 C Class H 125 C Class F 130 C Class H 150 C Number 480Y/240Y 416Y/208Y 480Y/240Y 416Y/208Y 480Y/240Y 416Y/208Y 480Y/240Y 416Y/208Y 480Y/240Y 416Y/208Y 431RSL4005❷ RSL4007❷ RSL4009❷ RSL4011❷ RSL4013❷ RSL4015❷ RSL4017❷ RSL4019❷ RSL4021❷ RSL4024❸ RSL4027❷ RSL4028❸ RSL4030❸ RSL4032❸ RSL4034❸ RSL4036❸ RSL4045❷ The following are single voltage 416Y 480Y only 574RSL4038❹ RSL4044❻ RSL4046❻ RSL4048❺ RSL4050❻ RSL4052❻ RSL4054❻ RSL4058❻ Form wound coil designs single voltage 416Y 480Y volts only 744FSL4060❻ FSL4062❻ kw 60 Hertz Three Phase, Medium Voltage 6 Leads 1800 RPM kw Ratings at 4160 Volts ❶ Model Class B Class F Class H Number Cont. 80 C Cont. 105 C Stby. 130 C Cont. 125 C Stby. 150 C 573FSM FSM FSM FSM FSM FSM FSM FSM FSM FSM ❶ All are based upon NEMA rise by resistance. ❷ 12 Lead ❸ 10 or 12 Lead ❹ 4 Lead ❺ 4 Bars or 12 Lead ❻ 4 Bars
5 kva 50 Hertz Three Phase, Low Voltage 4, 10 and 12 Leads 1500 RPM kva Continuous Duty ❶ kva Standby Duty ❶ Model Class F 105 C Class H 125 C Class F 130 C Class H 150 C Number 415Y/208Y 380Y/190Y 415Y/208Y 380Y/190Y 415Y/208Y 380Y/190Y 415Y/208Y 380Y/190Y 431RSL4005❷ RSL4007❷ RSL4009❷ RSL4011❷ RSL4013❷ RSL4015❷ RSL4017❷ RSL4019❷ RSL4021❷ RSL4024❸ RSL4027❷ RSL4028❸ RSL4030❸ RSL4032❸ RSL4034❸ RSL4036❸ RSL4045❷ The following are single voltage 380Y 415Y only 574RSL4038❹ RSL4044❻ RSL4046❻ RSL4048❺ RSL4050❻ RSL4052❻ RSL4054❻ RSL4058❻ Form wound coil designs single voltage 380Y 415Y volts only 744FSL4060❻ FSL4062❻ kva 50 Hertz Three Phase, Medium Voltage 6 Leads 1500 RPM kva Ratings at 3300 Volts ❶ Model Class B Class F Class H Number Cont. 80 C Cont. 105 C Stby. 130 C Cont. 125 C Stby. 150 C 573FSM FSM FSM FSM FSM FSM FSM FSM FSM FSM ❶ All are based upon NEMA rise by resistance. ❷ 12 lead ❸ 10 or 12 lead ❹ 4 lead ❺ 4 Bars or 12 lead ❻ 4 Bars
6 Y Optional for RTD Terminals C Optional Dripcover P X Frame Diameter D B H 2F BA E A Frame Dimensions in inches and (millimeters) All dimensions are approximate. Refer to dimension section of the Generator Catalog for full dimensional data. Frame Size A B BA C D E 2F H P X Y MAX Net Wgt. lbs. (kg) (533) (254) (254) (975) (575) (229) (152) (330) (673) (1010) (386) (623) (533) (254) (254) (1102) (575) (229) (152) (330) (673) (1010) (386) (832) (533) (254) (254) (1255) (575) (229) (279) (330) (673) (1010) (386) (1075) (572) (381) (292) (1308) (702) (254) (279) (394) (782) (1083) (437) (1411) (572) (610) (292) (1474) (702) (254) (508) (394) (782) (1083) (437) (1642) (533) (610) (292) (1651) (702) (254) (508) (394) (782) (1083) (437) (1923) (533) (610) (292) (1759) (702) (254) (508) (394) (782) (1083) (488) (2268) (838) (686) (305) (1813) (702) (381) (584) (483) (782) (1307) (488) (2359) (838) (686) (305) (1672) (870) (381) (584) (483) (966) (1307) (539) (2490) (838) (686) (305) (1849) (870) (381) (584) (483) (966) (1307) (539) (2858) (838) (1041) (305) (2014) (870) (381) (940) (483) (966) (1307) (539) (3538) (838) (1041) (305) (2180) (870) (381) (940) (483) (966) (1307) (539) (4418) Please Note: Connection boxes shown are furnished as standard product. Consult factory for optional connection boxes. This brochure is printed on recycled paper wbecause Marathon Electric shares in the concern for our environment. SB M/SS/7-00/15M/RP Printed in the U.S.A. Americas Generators 8511 NW 61st Street Miami, FL U.S.A. Phone: (305) Fax: (305)
n Agricultural n Commercial n Telecommunications n Rental Markets n Design & Application Experience n Advanced Testing Facilities
MagnaPLUS offers a field-adaptable, permanent magnet generator, coupled with the PM300 or DVR 2000E voltage regulator, for installations requiring fault current support or for applications involving non-linear
More informationMAGNAPLUS GENERATORS PRODUCT GUIDE KVA 5 TO 420 (50 HERTZ) ISO 9001:2008 CERTIFIED
MAGNAPLUS GENERATORS PRODUCT GUIDE KVA 5 TO 420 (50 HERTZ) ISO 9001:2008 CERTIFIED MARATHON GENERATORS HISTORY & FOUNDATION Regal Beloit Corporation was established in Wisconsin in 1955 where they set
More informationHCI 534E/544E - Technical Data Sheet
HCI 34E/44E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI 434E/444E - Technical Data Sheet
HCI 434E/444E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationPI734G - Winding 312. Technical Data Sheet APPROVED DOCUMENT
- Winding 312 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international standards
More informationPI736F - Winding 312. Technical Data Sheet
PI736F - Winding 312 Technical Data Sheet PI736F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international
More informationPM734E - Winding 28. Technical Data Sheet APPROVED DOCUMENT
- Winding 28 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationUCDI224F - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationHCI 534C/544C - Technical Data Sheet
HCI 34C/44C - Technical Data Sheet HCI34C/44C SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationLVI634E - Technical Data Sheet
LVI634E - Technical Data Sheet LVI634E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI224C - Technical Data Sheet
UCI224C - Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI 434E/444E - Technical Data Sheet
HCI 434E/444E - Technical Data Sheet HCI434E/444E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCDI274J - Technical Data Sheet
UCDI274J - Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI 534F/544F - Technical Data Sheet
HCI 34F/44F - Technical Data Sheet HCI34F/44F SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 434D/444D - Technical Data Sheet
HCI 434D/444D - Technical Data Sheet HCI434D/444D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI634G - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationUCI274H - Technical Data Sheet
UCI274H - Technical Data Sheet UCI274H SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCM534D - Winding 14 APPROVED DOCUMENT. Technical Data Sheet
- Winding 14 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards
More informationUCDI224E - Technical Data Sheet
UCDI224E - Technical Data Sheet UCDI224E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI274H - Technical Data Sheet Winding 06
- Technical Data Sheet Winding 06 SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCM274C - Technical Data Sheet
UCM274C - Technical Data Sheet UCM274C SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationUCM274H - Technical Data Sheet
UCM274H - Technical Data Sheet UCM274H SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationHCI634V - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationHCM534F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationUCI274C - Technical Data Sheet Winding 06
- Technical Data Sheet Winding 06 SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCM434E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
HCM434E - Winding 311 Single Phase Technical Data Sheet HCM434E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationUCM274E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
UCM274E - Winding 311 Single Phase Technical Data Sheet UCM274E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationHCI434C/444C - Winding 17 APPROVED DOCUMENT. Technical Data Sheet
- Winding 17 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 34 and the relevant section of other international
More informationUCM274E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCM274E - Winding 311 Technical Data Sheet UCM274E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationHCI 534E/544E - Technical Data Sheet
HCI 34E/44E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCM224D - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
UCM224D - Technical Data Sheet UCM224D SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other
More informationUCM274C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCM274C - Winding 311 Technical Data Sheet UCM274C SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationUCI224F - Technical Data Sheet
UCI224F - Technical Data Sheet UCI224F SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCDI274K - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationUCI274D - Technical Data Sheet
UCI274D - Technical Data Sheet UCI274D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI274E - Winding 14 APPROVED DOCUMENT. Technical Data Sheet
UCI274E - Winding 14 Technical Data Sheet UCI274E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 434F/444F - Technical Data Sheet
HCI 434F/444F - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI274D - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationUCI274G - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationHCI634H - Technical Data Sheet
HCI634H - Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI224F - Winding 25. Technical Data Sheet APPROVED DOCUMENT
- Winding 25 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as
More informationUCDI274K - Technical Data Sheet
UCDI274K - Technical Data Sheet UCDI274K SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI224F - Winding 14. Technical Data Sheet APPROVED DOCUMENT
UCI224F - Winding 14 Technical Data Sheet UCI224F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCI224G - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other
More informationUCI224E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI224E - Winding 311 Technical Data Sheet UCI224E SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCI224C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI224C - Winding 311 Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCI224D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet. Generator Solutions AS
UCI224D - Winding 311 Technical Data Sheet UCI224D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCI274D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI274D - Winding 311 Technical Data Sheet UCI274D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationHCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
HCI634J - Winding 311 and 312 Technical Data Sheet HCI634J SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI634H - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
HCI634H - Winding 311 and 312 Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 534E/544E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCI 34E/44E - Winding 311 Technical Data Sheet HCI34E/44E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationHCI 534C/544C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCI 34C/44C - Winding 311 Technical Data Sheet HCI34C/44C SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationPRIMELINE. Induction Generator. Now Introducing Single Bearing Designs. Simple, Reliable Power For Wind or Engine Driven Applications
PRIMELINE Induction Generator Now Introducing Single Bearing Designs Simple, Reliable Power For Wind or Engine Driven Applications ISO 9001: 2000 Certified PRIMELINE Induction Generator General Description
More informationUCDI274J - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCDI274J - Winding 311 Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationS5L1D-G4 Wdg Technical Data Sheet
- Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the IEC EN 60034 and the relevant section of other international standards such as BS5000,
More informationUCI274E - Winding 06 APPROVED DOCUMENT. Technical Data Sheet
- Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as
More informationUCI224E - Winding 06. Technical Data Sheet APPROVED DOCUMENT
- Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as
More informationUCI224E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet the requirements of eliminates
More informationUCI224F - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet the requirements of eliminates
More informationUCI224C - Winding 06. Technical Data Sheet APPROVED DOCUMENT
UCI224C - Winding 06 Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationG Plus Line Synchronous Generators. Motors Automation Energy Paints
G Plus Line Motors Automation Energy Paints Available with ratings up to 4200kVA, the G Plus series generators from WEG are normally used in gas and diesel generating set units. They are also suited to
More informationHCI434E/444E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
HCI434E/444E - Technical Data Sheet HCI434E/444E SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet
More informationHCI534F/544F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
HCI34F/44F - Technical Data Sheet HCI34F/44F SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet
More informationHCI634H - Winding 311 and 312. Technical Data Sheet
HCI634H - Winding 311 and 312 Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCM634K - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 and 312 Technical Data Sheet SPECIFICATIONS & OPTIONS WINDING 311 and 312 STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationP734H - Technical Data Sheet
P734H - Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationBCI184J - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationBCI184H - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationBCI164C - Technical Data Sheet Winding 06
- Technical Data Sheet Winding 06 SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationLow Voltage Alternators - 4 pole LSA 44.3
LSA 44.3 70 to 150 kva - 50 Hz / 88 to 188 kva - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 44.3 alternator is designed to be suitable for typical generator applications,
More informationHCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 and 312 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationPI044G - Winding 06 APPROVED DOCUMENT. Technical Data Sheet
- Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationPI144J - Winding 05 APPROVED DOCUMENT. Technical Data Sheet
- Winding 05 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationkva kw kva Dry Weigt Length Width kg K.U.N.Z. Handels-&Produktions GmbH
Prime* Voltage kva kw kva 380-415 180 144 200 Standby* kw 160 Ampere 251 Prime Rating Standby Rating Applicable for supplying continuous electrical power at variable load for unlimited hours. This model
More informationPI144D - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144J - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationBCI164D - Technical Data Sheet
BCI164D - Technical Data Sheet BCI164D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationBCI164B - Technical Data Sheet
BCI164B - Technical Data Sheet BCI164B SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationBCI164A - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More information55 KW / 69 KVA POWERED by
55 KW / 69 KVA POWERED by MODEL Triton Power is a world leader in the design, manufacture of stationary, mobile and rental generator sets and Power Modules from 10 to 2000 kw. Through our commitment to
More informationContact us. Catalog Low voltage generators for diesel and gas engines Industrial Marine applications - series Standard series
Contact us Catalog Low voltage generators for diesel and gas engines Industrial Marine applications - series Standard series We provide motors and generators, services and expertise to save energy and
More informationVoltage HZ Phase P.F Standby Amps Standby Ratings kw/kva
JS275UC MODEL Stand-by Power @ 60Hz Prime Power @ 60Hz DIESEL GENSET JS275UC 275kW / 344 kva 250 kw / 313 kva Standard Features General features : Engine (JOHN DEERE, 6081HF070-318 ) Engine EPA Carb Charge
More informationVoltage HZ Phase P.F Standby Amps Standby Ratings kw/kva
JS200UC MODEL Stand-by Power @ 60Hz Prime Power @ 60Hz DIESEL GENSET JS200UC 200kW / 250 kva 182 kw / 227 kva Standard Features General features : Engine (JOHN DEERE, 6068HF475 ) Engine EPA Carb Charge
More information60 KW / 75 KVA POWERED by
60 KW / 75 KVA POWERED by MODEL Triton Power is a world leader in the design, manufacture of stationary, mobile and rental generator sets and Power Modules from 10 to 2000 kw. Through our commitment to
More informationTM20UCM MODEL. Standard Features. Generator Ratings. Conditions of sale. Prime Hz 18 kw / 18 kva. General features :
TM20UCM MODEL Standard Features DIESEL GENSET TM20UCM Stand-by Power @ 60Hz 20kW / 20 kva Prime Power @ Hz 18 kw / 18 kva General features : Engine (MITSUBISHI, S4Q2.Y262SD ) Engine EPA Carb Charge alternator
More informationPI044D - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144G - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI044H - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI044F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI044E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationVoltage HZ Phase P.F Standby Amps Standby Ratings kw/kva. Prime Ratings kw/kva 240MONO / 10 9 / 9
TM11UCM MODEL Stand-by Power @ 60Hz Prime Power @ 60Hz DIESEL GENSET TM11UCM 10kW / 10 kva 9 kw / 9 kva Standard Features General features : Engine (MITSUBISHI, S3L2.W262SD ) Engine EPA Carb Charge alternator
More informationPrime 60Hz 155 kw / 193 kva. Voltage HZ Phase P.F Standby Amps Standby Ratings kw/kva
J170UC MODEL DIESEL GENSET J170UC Stand-by Power @ 60Hz 170kW / 213 kva Prime Power @ 60Hz 155 kw / 193 kva Standard Features General features : Engine (JOHN DEERE, 6068HF275-187 ) Engine EPA Carb Charge
More informationPrime Hz 400 kw / 500 kva. Voltage HZ Phase P.F Standby Amps Standby Ratings kw/kva
GS500K MODEL DIESEL GENSET GS500K Stand-by Power @ 50Hz 440kW / 550 kva Prime Power @ Hz 400 kw / 500 kva Standard Features General features : Engine (VOLVO, TAD1631GE ) Charge alternator 24 V, Governor:Electronic
More informationLSA 52.3 Low Voltage Alternators - 4 pole
LSA 52.3 Low Voltage Alternators - 4 pole 1860 to 2500 kva - 50 Hz / 2230 to 3000 kva - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 52.3 alternator is designed to be
More information57 KW / 71 KVA POWERED by
57 KW / 71 KVA POWERED by MODEL Triton Power is a world leader in the design, manufacture of stationary, mobile and rental generator sets and Power Modules from 10 to 2000 kw. Through our commitment to
More informationDIESEL GENSET. Prime Hz 16 kw / 20 kva. Voltage HZ Phase P.F Standby Amps Standby Ratings kw/kva
TM20K MODEL DIESEL GENSET TM20K Stand-by Power @ 50Hz 18kW / 22 kva Prime Power @ Hz 16 kw / 20 kva Standard Features General features : Engine (MITSUBISHI, S4Q2.SD ) Charge alternator 12 V, Governor:Meca/Mechanical
More informationDiesel generator set QSK23 series engine
Specification sheet Diesel generator set QSK23 series engine 600 kw - 800 kw Standby Description Cummins commercial generator sets are fully integrated power generation systems providing optimum performance,
More informationDIESEL GENSET. Prime 60Hz 91 kw / 114 kva
J100U MODEL DIESEL GENSET J100U Stand-by Power @ 60Hz 100kW / 125 kva Prime Power @ 60Hz 91 kw / 114 kva Standard Features General features : Engine (JOHN DEERE, 4045HF120 ) Charge alternator 12 V, Governor:Meca
More information