IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

Transcription

1 Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to 6 models). The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting. Motors Models 16-2: Class B, with ball bearings and safety thermal overload protection. IP44. Direct 2-speed connection and also suitable for voltage speed control. Electrical supply: Single phase 23V-/6Hz. Models 4 and 6: Class F, with ball bearings and safety thermal overload protection. IP4. Suitable for voltage speed control. Electrical supply: Single phase 23V-/6Hz. Additional information Three phase models adjustable by inverter control. TD-MIXVENT-T models TD-MIXVENT versions fitted with a run-on-timer adjustable within 1 and 3 minutes and onespeed motor not suitable for speed control. The MIXVENT-TD fans offer the ideal in-line duct fan solution for a wide range of general residential or commercial ventilation application into. 78 In-Line duct fans TD-MIXVENT

2 Low profile Classic centrifugal In-line centrifugal Ventilation casing Mixed flow MIXVENT The low profile of the MIXVENT-TD fans makes them the most effective solution for installations where the space of installation is limited such as false ceilings. Easy to mount Easy maintenance Fix the support bracket. Place the impeller and motor assembly. The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting. Carry out the wiring connections. Connect the ducts. Flexible mounting position MODE TD-MIXVENT-T MODEL 16 Can be mounted at any place of the air duct. Models MIXVENT-TD-T (from 16 to 8 models) are fitted with an adjustable timer between 1 and 3 minutes and are supplied with a one-speed motor not suitable for speed control. Model TD-16/1N SILENT offer very low noise level, with a motor mounted on silent-elastic-blocks which absorb the vibrations. In-Line duct fans TD-MIXVENT 781

3 Design characteristics N Polypropylene casing Steel casing ABS impeller Aluminium impeller (1) (1) Protection class II II II II II II I I I I I Thermal protection by fuse Manual resetting thermal protector (PTC) Ball bearings greased for life 1 speed controllable motor 2 speed controllable (2) motor (1) Models from one piece die cast aluminium impeller. (2) Models with Run-On-Timer fitted (TD-MIXVENT-T) are not controllable. Technical characteristics Speed TD-MIXVENT Speed (rpm) power (W) current (A) Airflow at free discharge (m 3 /h) operating temperature ( C) Sound pressure level* (db(a)) Ø Duct (mm) Weight (kg) Optional speed controller Wiring diagram** (nº) TD-16/1 N SILENT 2, / , ,4 RMB-1, / REB-1 9, 1 TD-/ , / , , RMB-1, / REB-1 9, 1 TD-3/1 2 3, / , , RMB-1, / REB-1 9, 1 TD-/, / , ,7 RMB-1, / REB-1 9, 1 TD-/16, / , ,7 RMB-1, / REB-1 9, 1 TD-8/2N 278 9, / , ,9 RMB-1, / REB-1 9, 1 TD-8/2 12, /+6 2 1, ,9 RMB-1, / REB-1 9, 1 TD-1/ 28 1, / , ,4 RMB-1, / REB-1 12, 13 TD-13/ 2 18, / , ,4 RMB-1, / REB-1 12, 13 TD-2/3 27 1, / , , RMB-1, / REB-2, 12, 13 TD-4/ , / , RMB-3, / REB-2,, 16 TD-6/ ,97. -4/ , RMB-8 / REB- 17, 18 THREE PHASE TD-4/3 TRIF , / , RMT-1, / VFTM TRI,37 21 TD-6/4 TRIF ,1. -4/ , RMT-2, / VFTM TRI,7 21 * Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet. ** See section of Wiring Diagrams. TD-MIXVENT-T (models TD-MIXVENT with run-on timer) Speed (rpm) power (W) current (A) Airflow at free discharge (m 3 /h) operating temperature ( C) Sound pressure level* (db(a)) Ø Duct (mm) Weight (kg) TD-16/1 NT SILENT 2, / ,4 TD-/1 T 22 24, / , TD-3/1 T 2 3, / , TD-/ T,22 8-2/ ,7 TD-/16 T,22 8-2/ ,7 TD-8/2 T 12, 1.1-2/ ,9 * Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet. 782 In-Line duct fans TD-MIXVENT

4 Dimensions (mm) TD-16/1 N SILENT TD- to TD-2 TD-4 / TD-6 B C ØK A ØE ØF J D G H I G Model X A Ø B C Ø D E F G H TD-/ TD-3/ TD-/ TD-/ TD-8/2N 232, TD-8/2 232, TD-1/ TD-13/ TD-2/ Model A B C D Ø E Ø F G H I J Ø K TD-4/ TD-6/ Acoustic power spectrum in db(a), for every frequency band, at the inlet and radiated, at high speed AT INLET TD-16/1 N SILENT TD-/ TD-3/ TD-/ TD-/ TD-8/2N TD-8/ TD-1/ TD-13/ TD-2/ TD-4/ TD-6/ RADIATED TD-16/1 N SILENT TD-/ TD-3/ TD-/ TD-/ TD-8/2N TD-8/ TD-1/ TD-13/ TD-2/ TD-4/ TD-6/ In-Line duct fans TD-MIXVENT 783

5 Performance curves qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at 2ºC and 76 mmhg. Performance data in accordance with ISO 81 and AMCA Standards. : High speed : Low speed TD-16/1 N SILENT qv [m 3 /s] TD-/ TD-3/ qv [m 3 /s] qv [m 3 /s] 3 3 TD-/ TD-/ TD-8/2 N qv [m 3 /s] qv [m 3 /s] 784 In-Line duct fans TD-MIXVENT

6 Performance curves qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at 2ºC and 76 mmhg. Performance data in accordance with ISO 81 and AMCA Standards. : High speed : Low speed 4 4 TD-8/2 6 6 TD-1/ qv [m 3 /s] qv [m 3 /s] 6 6 TD-13/ 9 9 TD-2/ qv [m 3 /s] qv [m 3 /s] 3 3 TD-4/3 3 3 TD-6/ V 17V 23V 2 2 V 17V 23V V V V V qv [m 3 /s] qv [m 3 /s] In-Line duct fans TD-MIXVENT 78

7 KITS TD-MIXVENT KITS TD-MIXVENT The TD ventilation kits enable the simple and fast installation of a complete ventilation system. The kits provide efficient extraction for bathrooms, toilets, washrooms and any other applications that require the removal of bad odours, stuffy and humid air. KIT TD-16/1 N SILENT includes: 1 TD-16/1 N SILENT fan + 1 interior circular air valve BOR exterior mounted grille GR-1 KIT TD-/1 includes: 1 TD-/1 fan + 1 interior circular air valve BOR exterior mounted grille GR-1 Installation and mounting KIT TD-16/1 NT SILENT includes: 1 TD-16/1 NT SILENT fan + 1 interior circular air valve BOR exterior mounted grille GR-1 KIT TD-/1T includes: 1 TD-/1 T fan + 1 interior circular air valve BOR exterior mounted grille GR-1 The TD-T extractors are fitted with an adjustable Run-On-Timer between 1 and 3 minutes, keeping the fan in operation for the selected period of time after being switched off. Accessories included in kit GSA-1 1 mm diameter of flexible aluminium ducting. GR-1 Exterior mounted grille. BOR-1 Interior circular air valve. BA- Adhesive aluminium duct tape (1 m). 786 In-Line duct fans KITS TD-MIXVENT