UL Listed TP408. KNOCKOUTS Cat. # Bracket Description Sides Bottom Unit Qty. Wt. Lbs. Per 100 TP408 Drawn 12 1 /2" 5 1 /2" 50 61
|
|
|
- Camilla Osborne
- 6 years ago
- Views:
Transcription
1 4" SQUARE OUTLET BOXES AND COVERS Features: Applications: For use with conduit Can be ceiling mounted to be used as a junction box or to mount lighting fixtures Available in red for fire alarm applications Ideal for exposed work applications, providing an easy method for the installation of electrical devices (switches, receptacles, fans, lights, etc.) Raised ground screw location in the welded boxes saves time in installation Available with pre-installed ground screws and pigtails for increased labor savings Knockouts are suitable for use without a bonding jumper in circuits above or below 250 volts Available in two depths for differing cubic capacity requirements Welded or drawn construction to match customer preference Extensive cover offering to meet various customer applications and needs Certifications and Compliances: UL Listed 4" SQUARE OUTLET BOXES 18.0 CUBIC INCH CAPACITY 1 1 /4" DEEP FOR CONDUIT TP408 TP408 Drawn 12 1 /2" 5 1 /2"
2 4" SQUARE OUTLET BOXES 22.0 CUBIC INCH CAPACITY (WELDED) 21.0 CUBIC INCH CAPACITY (DRAWN) 1 1 /2" DEEP FOR CONDUIT TP404/TP404PF TP404SSB TP404MSB TP404RED TP425 TP469 TP830* TP405 TP412 TP839* TP410 Cat. # TP414RED TP414 TP418 TP423RED TP423 Metal Stud Sizes Bracket Description Sides Bottom TP40SMSB MSB Welded 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP40SMSBPF* MSB Welded/Open Back 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP404** Welded 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP404MSB MSB Welded 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP404RED Welded 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP404REDMSB MSB Welded 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP404PF ** Welded 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP404SSB SSB Welded 8 1 /2", 4 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP425** "VP" Welded 6 1 /2", 3 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP423** All "VMS" Welded 6 1 /2", 3 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP423RED All "VMS" Welded 6 1 /2", 3 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP405 Drawn 4 1 /2", 6 1 /2" & 3 /4" C 3 1 /2", 2 3 /4" TP405MSB MSB Drawn 4 1 /2", 6 1 /2" & 3 /4" C 3 1 /2", 2 3 /4" TP410 Drawn 12 1 /2" 5 1 /2" TP410MSB MSB Drawn 12 1 /2" 5 1 /2" TP412 Drawn 8 3 /4" 3 1 /2", 2 3 /4" TP412MSB MSB Drawn 8 3 /4" 3 1 /2", 2 3 /4" TP414 Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP414MSB MSB Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP414RED Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP414REDMSB MSB Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP418 "F", Set Flush Welded 6 1 /2", 3 1 /2" + 3 /4" E 2 1 /2", 2 1 /2" + 3 /4" E TP467 Welded 8 3 /4" 2 1 /2", 2 1 /2" + 3 /4" E TP467MSB MSB Welded 8 3 /4" 2 1 /2", 2 1 /2" + 3 /4" E TP469 ALL "VMS" Welded 6 3 /4" 2 1 /2", 2 1 /2" + 3 /4" E Air Plenum TP830* Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP839* Drawn 8 3 /4" C 3 1 /2", 2 3 /4" *For Air Plenum (No Mounting Holes) - Not UL Listed **cul Listed All welded 4" square outlet boxes have a raised dimple for ground screw TP404PF includes ground screw with pigtail lead Unit Qty. Wt. Lbs. Per
3 4" SQUARE OUTLET BOXES 22.0 CUBIC INCH CAPACITY 1 1 /2" DEEP FOR NONMETALLIC CABLE CLAMPS IN EACH END TP444 TP444SSB TP449 TP446 TP445 TP444 Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP444MSB MSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP444SSB SSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP446 "F", Set Flush Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" TP445 "VP" Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" TP449 "VMS" Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" " SQUARE OUTLET BOXES 22.0 CUBIC INCH CAPACITY 1 1 /2" DEEP FOR ARMORED & METAL CLAD (MCI) CABLE CLAMPS IN EACH END TP454 TP454SSB TP456 TP459 TP461 TP459 "VMS" Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" TP454* Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP454MSB MSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP454PF Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP454SSB* SSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP456* "F", Set Flush Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" TP456PF "F", Set Flush Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" TP461* "VP" Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" TP catalog numbers ending in PF includes ground screw with pigtail lead *UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP ) MCAP is a registered trademark of Southwire Company. 155
4 4" SQUARE OUTLET BOXES 30.3 CUBIC INCH CAPACITY WITH CONDUIT KOs TP403/TP403PF TP403SSB TP403MSB TP434 TP432 TP432VMS TP437 TP438 TP831* TP403RED TP434RED TP451RED TP451 TP40DMSB MSB Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP40DMSBPF MSB Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP403** Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP403MSB MSB Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP403RED Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP403REDMSB MSB Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP403PF ** Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP403SSB SSB Welded 8 1 /2", 4 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP432** Welded 8 3 /4" 2 1 /2", 2 1 /2" & 3 /4" E TP432MSB MSB Welded 8 3 /4" 2 1 /2", 2 1 /2" & 3 /4" E TP432REDMSB MSB Welded 8 3 /4" 2 1 /2", 2 1 /2" & 3 /4" E TP432VMS "VMS" Welded 6 3 /4" 2 1 /2", 2 1 /2" & 3 /4" E TP436 Welded 8 1" 2 1 /2", 2 1 /2" & 3 /4" E TP436MSB MSB Welded 8 1" 2 1 /2", 2 1 /2" & 3 /4" E TP434 Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP434MSB MSB Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP434RED Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP434REDMSB MSB Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" TP438 Drawn 4 1 /2", 6 1 /2" & 3 /4" C 3 1 /2", 2 3 /4" TP438MSB MSB Drawn 4 1 /2", 6 1 /2" & 3 /4" C 3 1 /2", 2 3 /4" TP438PF Drawn 4 1 /2", 6 1 /2" & 3 /4" C 3 1 /2", 2 3 /4" TP451 "VMS" Welded 6 1 /2", 3 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP451PF "VMS" Welded 6 1 /2", 3 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP451RED "VMS" Welded 6 1 /2", 3 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E TP437 "VP" Welded 6 1 /2", 3 1 /2" & 3 /4" E 2 1 /2", 2 1 /2" & 3 /4" E Air Plenum TP831* Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" *For Air Plenum (No Mounting Holes) - Not UL Listed TP catalog numbers ending in PF includes ground screw with pigtail lead **cul Listed 156
5 4" SQUARE OUTLET BOXES 30.3 CUBIC INCH CAPACITY FOR NONMETALLIC CABLE CLAMPS IN EACH END TP450 TP450MSB TP450SSB TP452 TP450 Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP450MSB MSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP450SSB SSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP452 "VMS" Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" " SQUARE OUTLET BOXES 30.3 CUBIC INCH CAPACITY FOR ARMORED & METAL CLAD (MCI) CABLE CLAMPS IN EACH END TP431 TP431SSB TP440 Cat. # Metal Stud Sizes Bracket Description Sides Bottom Unit Qty. Wt. Lbs. Per 100 TP431* Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP431PF Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP431MSB MSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP431SSB* SSB Welded 4 Cable, 4 1 /2", 2 1 /2" & 3 /4" E 1 1 /2" TP440* All "VMS" Welded 4 Cable, 2 1 /2", 1 1 /2" & 3 /4" E 1 1 /2" TP catalog numbers ending in PF includes ground screw with pigtail lead *UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP ) MCAP is a registered trademark of Southwire Company. 157
6 & Covers 4" SQUARE TWO DEVICE BOXES 30.3 CUBIC INCH CAPACITY TP391 TP395 Cat. # Bracket Description Sides Bottom Std. Unit Pkg. Wt. Lbs. Per 100 TP391 "VS", Set 7 /8" Drawn 6 1 /2", 3 3 /4" 3 1 /2", 2 3 /4" TP395 Drawn 8 1 /2", 4 3 /4" 3 1 /2", 2 3 /4" " SQUARE EXTENSION RINGS 1 1 /2" DEEP WITH CONDUIT 21.0 CUBIC INCH CAPACITY WITH CONDUIT 30.3 CUBIC INCH CAPACITY TP424 TP422 TP426 TP428RED TP443 (2 1 /8" Deep) TP428, TP833* Cat. # Sides Bottom Unit Qty. Wt. Lbs. Per /2" DEEP TP /2" TP /2", 4 1 /2" + 3 /4" E TP /4" TP /2", 4 3 /4" TP428RED 8 1 /2", 4 3 /4" TP833* 8 1 /2", 4 3 /4" TP /2", 4 3 /4" TP " *For Air Plenum (No Mounting Holes). Requires the use of TP854, purchase separately - Not UL Listed For use as extension with switch box, not four square box FLEXIBLE FIXTURE HANGERS Cooper Crouse-Hinds TPSFH square flexible fixture hangers are used in commercial or light industrial applications where HID high bay and low bay lighting fixtures are used. Specific applications include storage facilities, shipping warehouses, retail and DIY facilities. Features and Benefits: Suitable for use with 1 /2" or 3 /4" fixture conduit stems these hangers allow the conduit stem of the fixture (luminaire) to swing in any direction. Maximum swing angle is 26 from vertical max slope angles 22 1 /2 Available for attachment to 4" square steel boxes. Quickly and easily attached by two screws. Hangers are drilled and tapped for use with 3 /4" conduit stem as standard and come supplied with a 3 /4" 1 /2" reducer for 1 /2" conduit stem applications. Certifications and Compliances: UL Listed UL 1598 CSA C22.2 No. 250 Suitable for Damp Locations Standard Materials and Finishes: Material: Sheet Steel Finish: Zinc Chromate for corrosion resistance Description For use with 4" Square boxes Support Wt. (lbs) Cat. # 50 TPSFH12 158
UL Listed TP408. KNOCKOUTS Cat. # Bracket Description Sides Bottom Unit Qty. Wt. Lbs. Per 100
4" SQUARE OUTLET BOXES AND COVERS Features: Applications: For use with conduit Available in red for fire alarm applications Ideal for exposed work applications, providing an easy method for the installation
Switch & Outlet Boxes Technical Data
Switch & Outlet Boxes Technical Data General Information: A box, with or without a bracket or bar hanger, intended for support of a fixture/luminaire weighing 50 lbs. or less is marked FOR FIXTURE/ LUMINAIRE
KNOCKOUTS Cat. # Bracket Plastic Clamp Conduit Cable Unit Qty. Wt. Lbs. Per 100 TP100 TP104 TP106 TP114
1" DEEP - NON-GANGABLE - 6.5 CUBIC INCH CAPACITY 1 15 /16" WIDE x 3 3 /4" LONG TP101 TP103 Cat. # Bracket Plastic Clamp Conduit Cable Unit Qty. Wt. Lbs. Per 100 TP101 "S" No 1 1 /2" 2 25 38 TP103 "S" Yes
Steel Outlet Boxes 4 11 /16" Welded
Steel Outlet Boxes 4 11 /16" Welded Steel Outlet Boxes Features & Benefits Ideal for exposed work applications, providing an easy method for the installation of electrical devices (switches, receptacles,
4-11/16 Square Boxes. With Conduit Knockouts OB/SB-1. 4SJ-3/4 1-1/2 Deep, Welded. 4SJ-EK 1-1/2 Deep, Welded. 4SJD-3/4 2-1/8 Deep, Welded
4-11/16 Square Boxes With Conduit Knockouts 4SJ-3/4 1-1/2 Deep, Welded 4SJ-EK 1-1/2 Deep, Welded 4SJD-3/4 4SJD-EK 4SJD-3/4-1 4SJD-1 4SJD-1-1/4 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std.
4 Square Partition Square Cut Tile Wall 2 Gang Cover 2 1/8 Deep 1/2 to 1 RSD
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TP862 4IN SQ Box Partition Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Material
Table of Contents. ETP Steel Boxes and Covers
FF Table of Contents CL-9 JB Bracket OCR2 4G5075S 50L 4OE-/2 4CS-/2 3GC-75 4SL-/2 8365N 4SJD-EK SX60 250 56N 4SROB-EK M-350 8409A 8486B 8487 2594 389 389VB GR2 FF Types Clamps and Brackets FF2 Miscellaneous
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
3 x 2 Square Corner Switch Boxes
94 1-1/2 Deep, Welded 111 111HB Loxbox support on each side, 111LE Four nail holes each side side 222 2-1/ 222-OW 2-1/ Old work-support clamps 225 2-1/ 222LE 2-1/ Four nail holes each side side 222NL 2-1/
Rigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0
Electrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
CATALOG. Steel City Metallic boxes and covers
CATALOG Steel City Metallic boxes and covers Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From connectors that help wire buildings
Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
CP Myers Hubs. Class I, Div. 2 Class II, Div. 1 and 2 Class III. when installed in accordance with the NEC. Features. Material.
Myers Hubs Class I, Div. 2 Class II, Div. 1 and 2 Class III when installed in accordance with the NEC. CP Myers Scru-tite TM and Ground hub are used in the termination of electrical circuits through wall
Floor Boxes. Flush Power and Communications. FPT4 Series Poke-Through: 4 Power and Communications. FPT4 Series Poke-Through: Covers
FPT Series Poke-Through: Power and Communications Four 20A, two circuits, six 2 AWG wires, prewired, pigtail ends in junction box (can be wired as isolated, labels provided) Keystone Communications Device
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Arktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
561LVB 561LVB 4 Oct Box W/Bracket. Features. Dimensions and Weight. Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 561LVB 561LVB 4 Oct Box W/Bracket Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
NATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
Taxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
In This Section. Metallic Boxes and Covers. Steel City Metallic Boxes and Covers A-1
In This Section Steel City Overview...A-2 A-5 Pre-Fab Components and Assemblies...A-6 A-17 Switch Boxes and Accessories...A-18 A-27 Thru-Wall Box...A-26 Round Boxes and Accessories...A-28 Octagon Boxes
Prismpack. V Enclosed HOLOPHANE
HOLOPHANE Prismpack V Enclosed PRISMPACK ENCLOSED LUMINAIRES ARE DESIGNED FOR THE MOST STRINGENT OF HIGH BAY APPLICATIONS. THE ALUMINUM COVERED GLASS WITH THE GASKETED GLASS BOTTOM IS ESPECIALLY DESIRABLE
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
G2.1 RETROFIT LED LIGHTING
INSTALLATION INSTRUCTIONS FOR CHEVRON CANOPY: G2.1 RETROFIT LED LIGHTING Please review site plans before proceeding. Contact LSI Graphic Solutions Plus Customer Service at 1-(800) 678-2001 for installation
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
Condulet Cast Device Boxes and Covers Application and Selection
F Condulet Cast and Covers Application and Selection Application: Cast device boxes are installed in conduit and cable systems to: Accommodate wiring devices Act as pull boxes for conductors in a conduit
Condulet Single Gang Cast Device Boxes With and Without Mounting Lugs for Threaded Rigid and IMC Conduit
Condulet Single Gang Cast Accessories Pages to 44 F Application: Cast device boxes are installed to: accommodate wiring devices act as pull boxes for conductors in a conduit system provide openings to
Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings
Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic
Floor Box Product Catalog
Floor Box Product Catalog FLOOR BOX ASSEMBLIES AND ACCESSORIES FOR RESIDENTIAL & COMMERCIAL CONSTRUCTION *INCLUDES THE NEW SLIDERBOX FLOOR BOX Allied Moulded Floor Boxes Adjustable Single Gang Floor Box
SERIES 4LBV-NF Flush Mount Lumen Bridgelux LED Lensed Downlight
APPLICATION These high-lumen fixtures are ideally suited for lobbies, auditoriums and many other applications with high ceilings, where superior light output is needed. Suitable for commercial, retail,
Prismalume. Enclosed HOLOPHANE
HOLOPHANE Prismalume Enclosed PRISMATIC GLASS REFLECTORS WITH TEMPERED GLASS CLOSURES ENSURE A LONG LASTING, DURABLE LIGHTING LUMINAIRE. A FULL RANGE OF WATTAGES AND LAMP TYPES COUPLED WITH AN ASSORTMENT
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
Nonmetallic Thermoplastic Boxes Wall/Ceiling Boxes with Soft Box Characteristics
Nonmetallic Thermoplastic es Wall/Ceiling es with Soft Characteristics flexbox Material & Labor Saving Features Allied Moulded flexbox switch and outlet boxes are molded of engineering grades of nonmetallic
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
CONTENTS. This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark:
This Product is Listed by UNDERWRITERS LABORATORIES INC. and Bears the Mark: This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark: SLATER SCD Installation Instructions For Self-Contained
BLACK BODY DIMMING 800/1300/1500 LUMEN 6 LED NEW CONSTRUCTION/REMODEL
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Black Body Dimming duplicates halogen dimming, offering a soft, natural, warm glow as light levels are reduced CCT warms from 3000K to K, while staying on the
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are
Sizes: 3, 4, 5, 6 ADJUSTABLE LED/HALOGEN HOUSING AIRTIGHT NEW CONSTRUCTION (IC/NON-IC)
ADJUSTABLE LED/HALOGEN HOUSING AIRTIGHT NEW CONSTRUCTION (IC/NON-IC) Sizes: 3, 4, 5, 6 Line voltage new construction airtight housing designed for IC and NON-IC rated ceilings. Accommodates a wide range
PRODUCT BROCHURE. Steel City fire-rated poke-through systems
PRODUCT BROCHURE Steel City fire-rated poke-through systems Table of contents 002 Fire-rated poke-through systems 004 009 FPT4 flush series 010 FPT3 flush series 011 012 FPT flush series 013 014 FFPT4
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors,
INSTRUCTION SHEET. Installation Instructions for Mercmaster LED Luminaire. Applications. Agency Ratings. Product Safety
650457-000 INSTRUCTION SHEET Installation Instructions for Mercmaster Luminaire for proper and safe installation of this product, please read the following instructions. Applications Marine and wet locations;
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
COMBINATION COVER & CARPET FLANGE
COMBINATION COVER & CARPET FLANGE Including Floor Box Products, Hubbell Incorporated is a registered ISO 9002 Company. Combination Cover & Carpet Flange Hubbell Floor Boxes SF3925 SF2925 SF2725 SF2525
SERIES 6LB79V-NF LENSED Lumen Bridgelux LED Recessed Downlight
APPLICATION These high-lumen fixtures are ideally suited for lobbies, auditoriums and many other applications with high ceilings, where superior light output is needed. PRODUCT DATA REFLECTOR: Spun aluminum
Mulberry Metal Products Seattle Stock Sheet
Weatherproof Lampholders (catalog page B23) 30001 Die Cast Lampholders Residential Grade Aluminum 36 39 lbs. 30002 Die Cast Lampholders Residential Grade Natural 36 39 lbs. 30003 Deluxe Lampholder Gray
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
PROJECT INFORMATION. Catalog No.
PROJECT INFORMATION Project Name Type Catalog No. Date FEATURES Quick and simple aircraft cable hanging system or pendant mount bracket available Long-life,,000 hour s at L80 reduce life cycle maintenance
INSTALLATION INSTRUCTION W Track Suspension system
SAFETY INSTRUCTIONS: - Suspension mounting system should be installed by a qualified electrician only. - System is intended for installation in accordance with National Electric Code, local and - Federal
LED Lighting for Convenience Stores, Canopies & Retail Buildings
LED Lighting for Convenience Stores, Canopies & Retail Buildings High performance LED Area Lights offer superior visibility and energy savings Full cut-off, wall mounted exterior lighting solutions engineered
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
LED lighting for drilling & marine Pauluhn ZPL LED luminaires. Pauluhn ZPL. LED luminaires for drilling & marine applications
LED lighting for drilling & marine Pauluhn ZPL LED luminaires Pauluhn ZPL LED luminaires for drilling & marine applications Pauluhn ZPL explosionproof LEDs Safe. Reliable. Efficient. Featuring the industry's
CABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations, purchased and installed by customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase 4
Potenza Commercial Pendant Compact Fluorescent, Incandescent, HID Medium, Large
PRODUCT SPECIFICATIONS PENDANT: Extruded aluminum body with silver powder coat finish. Clear prismatic acrylic diffuser dome provides soft self-illumination. MOUNTING: 4 solid square fixture hanger attached
Hubbell Marine Isolation Transformers 15 kva and 25 kva Models
Shore Power System 15 kva and 25 kva Models Protects Sensitive Equipment on Board Virtually Eliminates Potential for In-Water Stray Current Can be wired per ABYC E-11 for either a Polarization or Isolation
Electrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
CABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations purchased and installed by the Customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase
INSTALLATION INSTRUCTION W Track Recessed 120V Flangeless
W Track Recessed 120V Flangeless WT4-RTL, WT8-RTL, WT12-RTL SAFETY INSTRUCTION Read all of these instructions before installing the track system. Turn off power at main switch before installing or modifying
One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
OPTEVA 378 ENHANCED CASH RECYCLER TERMINAL FRONT LOAD LOBBY UNIT PLAN VIEW FRONT VIEW SIDE VIEW
L00 CALL -800--600 OPTEVA 8 ENHANCED CASH RECYCLER TERMINAL WITH mm ( ") UL SAFE 4 ( 6 ") 4 ( 6 ") CONSULT WITH DIEBOLD INSTALLATION/SERVICE BRANCH FOR ADDITIONAL DETAILS AND INFORMATION. PLEASE SEE PLANNING
CODE MANDATED INTERIOR EMERGENCY LIGHTING:
Powerful. Practical. Preferred. CODE MANDATED INTERIOR EMERGENCY LIGHTING: The emergency lighting system must be arranged to provide illumination automatically in the event of any interruption of normal
Juno Trac-Master Trac Lighting Systems. Comprehensive line and low voltage track systems
Juno Trac-Master Trac Lighting Systems Comprehensive line and low voltage track systems Juno Trac-Master System Safe and simple installation is what you can expect from Juno one-circuit and two-circuit
Condulet Conduit Bodies and Outlet Boxes Hazardous
Condulet Conduit Bodies and Outlet Boxes Hazardous 4F Description Page No. Application/Selection 48, 49 Lubricants HTL 59 STL 59 Conduit Bodies & Outlet Boxes Cylindrical EKC 57 90 Elbow LBH 58 LBY 58
N2MV Series W Non-metallic
N2MV Series 50-175W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ
HAZARDOUS LOCATION CLASSIFIED AREAS LW1 AND LW2 SERIES DOWN OR UP OPTICS
H6..H Project: Fixture Type: Location: Contact/Phone: FINIA LED WALL MOUNTED HAZARDOUS LOCATION CLASSIFIED AREAS LW AND LW SERIES DOWN OR UP OPTICS LED W, W, AND 8W PRODUCT DESCRIPTION The Finia LED LW
WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
LAD6 6 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD6 6 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
PDMHB Watt LED I-Beam High Bay
PDMHB Watt LED I-Beam High Bay Project: Type: Catalog #: STANDARD FEATURES DAMP 2.5kV Surge Protection The PDMHB is an LED I-beam high bay luminaire designed to illuminate commercial, industrial & retail
EBMC Combination Line Starters and Enclosures
EBMC Combination Line 3, 3R, 4, 4X, 7BCD, 9EFG, 12 Applications: Spectrum EBM hinged cover motor control enclosures are used: For general motor control and circuit protection indoors and outdoors in damp,
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes Weatherproof 3F Application: WP plugs and DS receptacles are used: wherever dust, dirt, moisture and corrosion are a problem outdoors or in locations
TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Reduced-profile, single-circuit trac sections for surface or pendant mounting. Compatible with a full range of feed, connector
Spring Test 10 due 05/11/2013
Spring Test 10 due 05/11/2013 Multiple Choice Identify the letter of the choice that best completes the statement or answers the question. 1. When installed in an agricultural building that houses livestock
Luminaires - LED High Bay
80 LED High Bay With STANDARD s high bay line, it is now easy to modernize your commercial or industrial applications; it is the perfect alternative for your traditional lighting system. Our high efficacy
Explosion Proof & Hazardous Area Junction Boxes
CSA - Class I Div. 1 - Groups C & D * CSA - Class I Zone 1 - Groups IIA, IIB * * Applies to GUI boxes only Explosion Proof & Hazardous Area Junction Boxes Features: Heavy-duty copper free (below 0.04%)
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
L1EPH ECONO LED HIGH BAY LUMINAIRE FEATURES AND SPECIFICATIONS MOUNTING OPTIONS & ACCESSORIES OVERVIEW
ECONO LED HIGH BAY LUMINAIRE Project: Type: Catalogue #: Drawn by: Date: Our new series of LED economical High Bays is an energy efficient solution that is ideal for use in applications such as warehouses,
Metalux SNLED LENSED LED
DESCRIPTION SNLED Lensed is a narrow LED lensed striplight series. This high quality luminaire is dedicated to the latest solid state lighting and electronic driver technology for optimal performance and
LAD8 8 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD8 8 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
Two Circuit Trac System TRAC SECTION, JOINERS & FEEDS
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single
HBDBM High Bay Series
HBDBM High Bay Series INSTALLATION INSTRUCTIONS The High Bay Luminaire is ideal for installations with mounting heights over 25 feet. The fixture can be mounted with a hook or pendant with flexible adjustments
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS READ ALL OF THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING THE TRACK SYSTEM SAVE THESE INSTRUCTIONS AND REFER TO THEM WHEN ADDITIONS TO OR CHANGES IN THE TRACK CONFIGURATION
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
Connecting Lighting & Controls
Connecting Lighting & Controls The RELOC Advantage Pipe & wire and MC cable are antiquated and inefficient. Using such labor intensive methods results in longer projects, higher on-site labor cost, project