TAPER-LOCK BUSHINGS. Bushing Bore and Keyseat Information Inches. Bushing Bore and Keyseat Information Metric. Installation Instructions
|
|
- Anna Baker
- 6 years ago
- Views:
Transcription
1 TAPER-LOCK BUSHINGS Bushing Bore and Keyseat Information Inches Bushing Bore and Keyseat Information Metric Installation Instructions Taper-Lock is a trademark of Baldor Electric Company P-1954-TBW 11/17... TB Wood s
2 Dimensions & Rating Table B A D (BOLT CIRCLE) A SECTION A-A A Bushing Size Torque Capacity (lb-in) Min. Bore Bore Range (in) Standard Keyseat Max Bore* *Key is furnished with each bushing having a shallow keyseat. Taper-Lock Bushings Shallow Keyseat Dimensions Mounting Screws Bolt Circle A B (in) Qty. Size , /4x1/ , /4x1/ , /8x5/ , /8x5/ , /8x5/ , /8x5/ , /8x5/ , /16x7/ , /2x , /2x , /8x1-1/ , /8x1-1/ , /2x1-1/ , /2x1-1/ , /8x1-3/ , /8x1-3/ , /4x , /4x , /8x2-1/ , /8x2-1/ , /4x3-1/ , /4x3-1/2 64 TB Wood s P-1954-TBW 11/17
3 TL1008 BUSHINGS TL /2 1/8 x 1/ TL10089/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL /16 3/16 x 3/ TL /4 3/16 x 3/ TL /16 3/16 x 3/ TL /8 3/16 x 3/ TL /16 1/4 x 1/ TL /4 x 1/ TL1108 BUSHINGS TL /2 1/8 x 1/ TL /16 1/8 x 1/ TL /16 1/8 x 1/ TL /8 3/16 x 3/ TL /16 3/16 x 3/ TL /4 3/16 x 3/ TL /16 3/16 x 3/ TL /8 3/16 x 3/ TL /16 1/4 x 1/8 0.2 TL /4 x 1/8 0.5 TL /16 1/4 x 1/ TL /8 1/4 x 1/ TL1210 BUSHINGS TL /2 1/8 x 1/ TL12109/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL121011/16 11/16 3/16 x 3/ TL /4 3/16 x 3/ TL121013/16 13/16 3/16 x 3/ TL /8 3/16 x 3/ TL121015/16 15/16 1/4 x 1/8 0.5 TL /4 x 1/8 0.5 TL /16 1/4 x 1/8 0.5 TL /8 1/4 x 1/8 0.5 TL /16 1/4 x 1/8 0.5 TL /4 1/4 x 1/8 0.5 TL1215 BUSHINGS TL /2 1/8 x 1/ TL12159/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL121511/16 11/16 3/16 x 3/ TL /4 3/16 x 3/ TL121513/16 13/16 3/16 x 3/ TL /8 3/16 x 3/ TL121515/16 15/16 1/4 x 1/8 0.6 TL /4 x 1/8 0.6 TL /16 1/4 x 1/8 0.6 TL /8 1/4 x 1/8 0.6 TL /16 1/4 x 1/8 0.6 TL /4 1/4 x 1/8 0.6 TL1310 BUSHINGS TL /2 1/8 x 1/ TL13109/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL131011/16 11/16 3/16 x 3/ TL /4 3/16 x 3/ TL131013/16 13/16 3/16 x 3/ TL /8 3/16 x 3/ TL131015/16 15/16 1/4 x 1/8 0.6 TL /4 x 1/8 0.6 TL /16 1/4 x 1/8 0.5 TL /8 1/4 x 1/8 0.5 TL /16 1/4 x 1/8 0.5 TL /4 1/4 x 1/8 0.4 TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 1/8 0.4 TL1610 BUSHINGS TL /2 1/8 x 1/ TL16109/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL161011/16 11/16 3/16 x 3/ TL /4 3/16 x 3/ TL161013/16 13/16 3/16 x 3/ TL /8 3/16 x 3/ TL161015/16 15/16 1/4 x 1/8 0.7 TL /4 x 1/8 0.7 TL /16 1/4 x 1/8 0.7 TL /8 1/4 x 1/8 0.7 TL /16 1/4 x 1/8 0.7 TL /4 1/4 x 1/8 0.7 TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/ TL /16 3/8 x 1/8 0.5 TL /8 3/8 x 1/8 0.5 TL /16 3/8 x 1/8 0.5 TL1615 BUSHINGS TL /2 1/8 x 1/ TL16159/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL161511/16 11/16 3/16 x 3/ TL /4 3/16 x 3/ TL161513/16 13/16 3/16 x 3/ TL /8 3/16 x 3/ TL161515/16 15/16 1/4 x 1/8 1.0 TL /4 x 1/8 1.0 TL /16 1/4 x 1/8 1.0 TL /8 1/4 x 1/8 1.0 TL /16 1/4 x 1/8 1.0 TL /4 1/4 x 1/8 1.0 TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/ TL /16 3/8 x 1/8 0.7 TL /8 3/8 x 1/8 0.6 TL /16 3/8 x 1/8 0.5 P-1954-TBW 11/17... TB Wood s
4 TL2012 BUSHINGS TL /2 1/8 x 1/ TL20129/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL201211/16 11/16 3/16 x 3/ TL /4 3/16 x 3/ TL201213/16 13/16 3/16 x 3/ TL /8 3/16 x 3/ TL201215/16 15/16 1/4 x 1/8 1.5 TL /4 x 1/8 1.5 TL /16 1/4 x 1/8 1.4 TL /8 1/4 x 1/8 1.5 TL /16 1/4 x 1/8 1.5 TL /4 1/4 x 1/8 1.5 TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/ TL /16 3/8 x 3/ TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /16 1/2 x 1/4 1.0 TL /8 1/2 x 1/4 1.0 TL /16 1/2 x 3/ TL /2 x 3/ TL /8 1/2 x 3/ TL2517 BUSHINGS TL /2 1/8 x 1/ TL25179/16 9/16 1/8 x 1/ TL /8 3/16 x 3/ TL251711/16 11/16 3/16 x 3/ TL /4 3/16 x 3/ TL251713/16 13/16 3/16 x 3/ TL /8 3/16 x 3/ TL251715/16 15/16 1/4 x 1/8 3.3 TL /4 x 1/8 2.0 TL /16 1/4 x 1/8 3.2 TL /8 1/4 x 1/8 3.1 TL /16 1/4 x 1/8 2.0 TL /4 1/4 x 1/8 2.0 TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/ TL /16 3/8 x 3/ TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /16 1/2 x 1/4 2.4 TL /8 1/2 x 1/4 2.0 TL /16 1/2 x 1/4 2.0 TL /2 x 1/4 2.0 TL /16 1/2 x 1/4 2.3 TL /8 1/2 x 1/4 2.0 TL /16 1/2 x 1/4 2 TL /4 1/2 x 1/4 2 TL /16 5/8 x 3/ TL /8 5/8 x 3/16 2 TL /16 5/8 x 3/16 2 TL /2 5/8 x 3/ TL /8 5/8 x 3/16 2 TL /16 5/8 x 3/ TL2525 BUSHINGS TL /4 3/16 x 3/ TL /8 3/16 x 3/ TL /4 x 1/8 4.7 TL /8 1/4 x 1/8 4.6 TL /16 1/4 x 1/8 4.5 TL /4 1/4 x 1/8 4.4 TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/16 4 TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /16 1/2 x 1/4 3.5 TL /8 1/2 x 1/4 3.4 TL /16 1/2 x 1/4 3.3 TL /2 x 1/4 3.2 TL /8 1/2 x 1/4 2.9 TL /16 1/2 x 1/4 2.8 TL /4 1/2 x 1/4 2.6 TL /16 5/8 x 3/ TL /8 5/8 x 3/ TL /16 5/8 x 3/ TL /2 5/8 x 3/ TL3020 BUSHINGS TL /8 3/16 x 3/ TL302015/16 15/16 1/4 x 1/8 6.1 TL /4 x 1/8 6.1 TL /8 1/4 x 1/8 5.9 TL /16 1/4 x 1/8 6 TL /4 1/4 x 1/8 5.9 TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/16 6 TL /16 3/8 x 3/ TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /16 1/2 x 1/4 5.4 TL /8 1/2 x 1/4 5.1 TL /16 1/2 x 1/4 5 TL /2 x 1/4 5.3 TL /16 1/2 x 1/4 4.8 TL /8 1/2 x 1/4 5 TL /16 1/2 x 1/ TB Wood s P-1954-TBW 11/17
5 TL /4 1/2 x 1/4 4.8 TL /16 5/8 x 5/ TL /8 5/8 x 5/16 4 TL /16 5/8 x 5/ TL /2 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /4 5/8 x 5/16 5 TL /16 3/4 x 1/4 3.7 TL /8 3/4 x 1/4 3.8 TL /16 3/4 x 1/4 3.4 TL /4 x 1/4 3.4 TL /8 3/4 x 1/4 3.4 TL /16 3/4 x 1/4 3.1 TL /4 3/4 x 1/4 3 TL3030 BUSHINGS TL303015/16 15/16 1/4 x 1/8 10 TL /4 x 1/8 9.4 TL /8 1/4 x 1/8 9.4 TL /16 1/4 x 1/8 9.2 TL /4 1/4 x 1/8 9 TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/ TL /16 3/8 x 3/ TL /8 3/8 x 3/ TL /16 3/8 x 3/16 8 TL /4 3/8 x 3/ TL /16 1/2 x 1/4 7.6 TL /8 1/2 x 1/4 7.5 TL /16 1/2 x 1/4 7.4 TL /2 x 1/4 6.2 TL /16 1/2 x 1/4 7.2 TL /8 1/2 x 1/4 7.1 TL /16 1/2 x 1/4 6.9 TL /4 1/2 x 1/4 6.7 TL /16 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /2 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /4 5/8 x 5/ TL /16 3/4 x 1/4 5.4 TL /8 3/4 x 1/4 5.3 TL /16 3/4 x 1/4 5 TL /4 x 1/4 4.9 TL /8 3/4 x 1/4 4.7 TL /16 3/4 x 1/4 4.7 TL /4 3/4 x 1/4 4.7 TL3525 BUSHINGS TL /16 1/4 x 1/8 16 TL /4 1/4 x 1/ TL /16 5/16 x 5/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/16 14 TL /16 3/8 x 3/16 14 TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /16 1/2 x 1/ TL /8 1/2 x 1/ TL /16 1/2 x 1/4 13 TL /2 x 1/4 13 TL /16 1/2 x 1/ TL /8 1/2 x 1/ TL /16 1/2 x 1/ TL /4 1/2 x 1/ TL /16 5/8 x 5/ TL /8 5/8 x 5/16 12 TL /16 5/8 x 5/ TL /2 5/8 x 5/ TL /16 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /4 5/8 x 5/ TL /16 3/4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 x 3/8 9.5 TL /16 3/4 x 3/8 9.4 TL /8 3/4 x 3/8 9.3 TL /16 3/4 x 3/8 8.6 TL /4 3/4 x 3/8 8.8 TL /5/16 7/8 x 1/4 8.7 TL /3/8 7/8 x 1/4 8.5 TL /16 7/8 x 1/4 8.2 TL /2 7/8 x 1/4 8 TL /16 7/8 x 1/4 8 TL /8 7/8 x 1/4 7.9 TL /16 7/8 x 1/4 7.9 TL /16 7/8 x 1/4 7.9 TL /4 7/8 x 1/4 7.9 TL /8 1 x 1/4 7.9 TL /16 1 x 1/4 7.9 TL3535 BUSHINGS TL /16 1/4 x 1/8 9.3 TL /4 1/4 x 1/ TL /8 5/16 x 5/ TL /16 3/8 x 3/ TL /2 3/8 x 3/ TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /8 1/2 x 1/ TL /16 1/2 x 1/ P-1954-TBW 11/17... TB Wood s
6 TL /2 x 1/ TL /8 1/2 x 1/ TL /16 1/2 x 1/ TL /4 1/2 x 1/ TL /16 5/8 x 5/ TL /8 5/8 x 5/16 12 TL /16 5/8 x 5/16 12 TL /2 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /4 5/8 x 5/ TL /8 3/4 x 3/8 10 TL /16 3/4 x 3/8 10 TL /4 x 3/8 9.7 TL /8 3/4 x 3/8 9.2 TL /16 3/4 x 3/8 8.8 TL /4 3/4 x 3/8 8.6 TL /16 7/8 x 1/4 9 TL /8 7/8 x 1/4 8.6 TL /16 7/8 x 1/4 8 TL /2 7/8 x 1/4 8.1 TL /8 7/8 x 1/4 7.3 TL /16 7/8 x 1/4 7 TL /4 7/8 x 1/4 6.7 TL /8 1 x 1/4 6 TL /16 1 x 1/4 5.8 TL4030 BUSHINGS TL /16 3/8 x 3/16 24 TL /2 3/8 x 3/16 22 TL /16 3/8 x 3/ TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /16 1/2 x 1/4 21 TL /8 1/2 x 1/ TL /16 1/2 x 1/ TL /2 x 1/ TL /16 1/2 x 1/ TL /8 1/2 x 1/ TL /16 1/2 x 1/ TL /4 1/2 x 1/ TL /16 5/8 x 5/16 20 TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /2 5/8 x 5/ TL /16 5/8 x 5/ TL /8 5/8 x 5/16 19 TL /16 5/8 x 5/ TL /4 5/8 x 5/ TL /16 3/4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 x 3/8 17 TL /16 3/4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 3/4 x 3/ TL /16 3/4 x 3/ TL /8 7/8 x 7/ TL /16 7/8 x 7/ TL /2 7/8 x 7/ TL /16 7/8 x 7/ TL /8 7/8 x 7/ TL /16 7/8 x 1/4 13 TL /4 7/8 x 1/ TL /8 1 x 1/ TL /16 1 x 1/ TL x 1/4 13 TL /8 1 x 1/ TL /16 1 x 1/ TL /4 1 x 1/ TL /8 1 x 1/ TL /16 1 x 1/4 12 TL4040 BUSHINGS TL /16 3/8 x 3/ TL /2 3/8 x 3/ TL /8 3/8 x 3/ TL /16 3/8 x 3/ TL /4 3/8 x 3/ TL /8 1/2 x 1/ TL /16 1/2 x 1/ TL /2 x 1/ TL /8 1/2 x 1/ TL /16 1/2 x 1/ TL /4 1/2 x 1/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /2 5/8 x 5/16 15 TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /4 5/8 x 5/ TL /8 3/4 x 3/8 15 TL /16 3/4 x 3/8 15 TL /4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 3/4 x 3/ TL /8 7/8 x 7/16 17 TL /16 7/8 x 7/ TL /2 7/8 x 7/16 17 TL /8 7/8 x 7/ TL /16 7/8 x 1/ TL /4 7/8 x 1/ TL /8 1 x 1/4 15 TL /16 1 x 1/ TL x 1/ TL /8 1 x 1/ TL /16 1 x 1/ TL /4 1 x 1/ TL /8 1 x 1/ TB Wood s P-1954-TBW 11/17
7 Bore and Keyseat Information TL /16 1 x 1/4 8.9 TL4535 BUSHINGS TL /16 1/2 x 1/4 31 TL /2 x 1/ TL /16 1/2 x 1/ TL /8 1/2 x 1/ TL /16 1/2 x 1/4 29 TL /4 1/2 x 1/ TL /16 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/16 28 TL /2 5/8 x 5/ TL /16 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /4 5/8 x 5/16 25 TL /16 3/4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 x 3/ TL /16 3/4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 3/4 x 3/ TL /16 7/8 x 7/ TL /8 7/8 x 7/ TL /16 7/8 x 7/ TL /2 7/8 x 7/ TL /16 7/8 x 7/ TL /8 7/8 x 7/16 21 TL /16 7/8 x 7/ TL /16 7/8 x 7/ TL /4 7/8 x 7/ TL /8 1 x 1/ TL /16 1 x 1/ TL x 1/ TL /8 1 x 1/ TL /16 1 x 1/ TL /4 1 x 1/ TL /8 1 x 1/ TL /16 1 x 1/ TL /2 1 x 1/ TL /4 11/4 x 1/ TL /8 11/4 x 1/ TL /16 11/4 x 1/ TL4545 BUSHINGS TL /16 1/2 x 1/ TL /2 x 1/ TL /16 1/2 x 1/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /8 5/8 x 5/ TL /4 5/8 x 5/ TL /8 3/4 x 3/ TL t15/16 3/4 x 3/ TL /4 x 3/8 20 TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 3/4 x 3/ TL /8 7/8 x 7/16 20 TL /16 7/8 x 7/ TL /2 7/8 x 7/ TL /8 7/8 x 7/ TL /4 7/8 x 7/16 19 TL /8 1 x 1/ TL /16 1 x 1/2 20 TL x 1/ TL /8 1 x 1/ TL /16 1 x 1/ TL /4 1 x 1/ TL /8 1 x 1/ TL /16 1 x 1/ TL /2 1 x 1/ TL /4 1-1/4 x 1/4 21 TL /8 1-1/4 1/ TL /16 1-1/4 x 1/ TL5040 BUSHINGS TL /16 5/8 x 5/ TL /2 5/8 x 5/ TL /16 5/8 x 5/ TL /8 5/8 x 5/ TL /16 5/8 x 5/ TL /4 5/8 x 5/ TL /16 3/4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 x 3/ TL /16 3/4 x 3/ TL /8 3/4 x 3/ TL /16 3/4 x 3/ TL /4 3/4 x 3/ TL /16 7/8 x 7/16 33 TL /8 7/8 x 7/ TL /16 7/8 x 7/16 32 TL /2 7/8 x 7/ TL /16 7/8 x 7/ TL /8 7/8 x 7/ TL /16 7/8 x 7/ TL /16 7/8 x 7/ TL /4 7/8 x 7/ TL /8 1 x 1/2 39 TL /16 1 x 1/ TL x 1/ TL /8 1 x 1/ TL /16 1 x 1/ TL /4 1 x 1/2 27 TL /8 1 x 1/2 26 TL /16 1 x 1/ TL /2 1 x 1/ TL / 4 1-1/4 x 1/ P-1954-TBW 11/17... TB Wood s
8 TL /8 1-1/4 x 1/ TL /16 1-1/4 x 1/ TL /4 x 1/ TL5050 BUSHINGS TL /16 5/8 x 5/16 39 TL /16 5/8 x 5/ TL /16 3/4 x 3/8 36 TL /8 7/8 x 7/16 33 TL /16 7/8 x 7/ TL /8 7/8 x 7/ TL /8 1 x 1/2 28 TL /16 1 x 1/ TL x 1/ TL /4 1 x 1/2 26 TL /8 1 x 1/2 25 TL /16 1 x 1/2 26 TL /2 1 x 1/2 26 TL /8 1-1/4 x 7/ TL /16 1-1/4 x 7/ TL /4 x 7/16 36 TL6050 BUSHINGS TL /4 x 3/8 65 TL /4 3/4 x 3/8 65 TL /16 7/8 x 7/16 65 TL x 1/2 65 TL /16 1 x 1/ TL /16 1-1/4 x 5/8 52 TL /16 1-1/4 x 5/8 46 TL /16 1-1/2 x 3/ TL /2 x 3/4 52 TL7060 BUSHINGS TL /4 x 3/8 95 TL /4 3/4 x 3/8 95 TL /16 7/8 x 7/16 95 TL /16 1-1/4 x 5/ TL /16 1-1/4 x 5/ TL /16 1-1/2 x 3/ TL /2 x 3/ TL /16 1-1/2 x 3/4 69 TL /2 1-1/2 x 3/ TL /16 1-3/4 x 7/8 61 TL /4 x 7/ TB Wood s P-1954-TBW 11/17
9 Metric Bores TL1008 BUSHINGS TL100814MM 14MM 5 X TL100816MM 16MM 5 X TL100818MM 18MM 6 X TL100819MM 19MM 6 X TL100820MM 20MM 6 X TL100822MM 22MM 6 X TL100824MM 24MM 8 X TL1108 BUSHINGS TL110816MM 16MM 5 X TL110818MM 18MM 6 X TL110819MM 19MM 6 X TL110820MM 20MM 6 X TL110822MM 22MM 6 X TL110824MM 24MM 8 X TL110825MM 25MM 8 X TL1210 BUSHINGS TL121014MM 14MM 5 X TL121016MM 16MM 6 X TL121018MM 18MM 6 X TL121019MM 19MM 6 X TL121020MM 20MM 6 X TL121024MM 24MM 8 X TL121025MM 25MM 8 X TL121028MM 28MM 8 X TL121030MM 30MM 8 X TL1610 BUSHINGS TL161019MM 19MM 6 X TL161020MM 20MM 6 X TL161022MM 22MM 6 X TL161024MM 24MM 8 X TL161025MM 25MM 8 X TL161028MM 28MM 8 X TL161030MM 30MM 8 X TL161032MM 32MM 10 X TL161035MM 35MM 10 X TL161038MM 38MM 10 X TL161040MM 40MM 12 X TL2012 BUSHINGS TL201214MM 14MM 5 X TL201216MM 16MM 5 X TL201218MM 18MM 6 X TL201219MM 19MM 6 X TL201220MM 20MM 6 X TL201222MM 22MM 6 X TL201224MM 24MM 8 X TL201225MM 25MM 8 X TL201228MM 28MM 8 X TL201230MM 30MM 8 X TL201232MM 32MM 10 X TL201235MM 35MM 10 X TL201238MM 38MM 10 X TL201240MM 40MM 12 X TL201242MM 42MM 12 X TL201245MM 45MM 14 X TL2517 BUSHINGS TL251714MM 14MM 5 X TL251716MM 16MM 5 X TL251718MM 18MM 6 X TL251720MM 20MM 6 X TL251722MM 22MM 6 X TL251724MM 24MM 8 X TL251725MM 25MM 8 X TL251728MM 28MM 8 X TL251730MM 30MM 8 X TL251732MM 32MM 10 X TL251735MM 35MM 10 X TL251738MM 38MM 10 X TL251740MM 40MM 12 X TL251742MM 42MM 12 X TL251745MM 45MM 14 X TL251748MM 48MM 14 X TL251750MM 50MM 14 X TL251755MM 55MM 16 X TL251760MM 60MM 18 X TL3020 BUSHINGS TL302024MM 24MM 8 X TL302025MM 25MM 8 X TL302028MM 28MM 8 X TL302040MM 40MM 12 X TL302045MM 45MM 14 X TL302048MM 48MM 14 X TL302050MM 50MM 14 X TL302055MM 55MM 16 X TL302060MM 60MM 18 X TL302065MM 65MM 18 X P-1954-TBW 11/17... TB Wood s
10 Taper-Lock Bushing Installation & Removal To Install Taper-Lock Bushings: 1. Clean shaft, bore and outside of bushing, and bore of hub (taking bushings from hub if already assembled). Remove any oil, grease and dirt. 2. Place hub onto shaft. Slip bushing onto shaft and into hub. Oil threads and points of setscrews or threads and under heads of capscrews. DO NOT lubricate the hub bore or the outside of the bushing. Place screws loosely in holes that are threaded on hub side (shown as on diagram above). 3. Locate assembly in desired position and tighten screws slightly to seat bushing in hub. 4. Tighten screws alternately and evenly to the fastener torque. Do not overtorque. Using a hammer and drift, hammer against large end of bushing. Hammer first beside the screw farthest from the bushing split and then hammer on the bushing on the opposite side of the screw. Avoid hammering close to the OD of the bushing to prevent damage. Working towards the split, hammer on the bushing on each side of the setscrews Then hammer on each side of the bushing split. Make sure that the surfaces on both sides of the split are even. Screws can now be tightened to fastener torque. Repeat sequence, hammering and retightening until the specified fastener torque no longer turns the screws after hammering. To Remove 1. Remove all screws. Oil threads and points of set screws or threads and under heads of cap screws. 2. Insert screws into holes that are threaded on the bushing side (shown as on diagram). In sizes where washers are found under the screw heads, be sure to use the washers. Note that one screw in each hub is left over and is not used in the loosening operation. 3. Tighten screws alternately until bushing is loosened in hub. If bushing does not loosen, tap on face of hub. WARNING: Use NO lubricants on the bushing body or hub bore Bushing Size Bushing Installation Bolts Fastener Torque Qty. Size lb-ft lb-in /4-20 Setscrew /8-16 Setscrew /16-14 Setscrew /2-13 Setscrew /8-11 Setscrew /2-13 Setscrew /8-11 Capscrew /4-10 Capscrew /8-9 Capscrew /4-7 Capscrew /4-7 Capscrew /2-6 Capscrew /2-6 Capscrew Caution: Excessive bolt torque can cause hub and/or bushing breakage. Note: To insure proper bushing/hub performance, full bushing contact on the shaft is recommended. 72 TB Wood s P-1954-TBW 11/17
GatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA
MAKING THE RIGHT SHAFT CONNECTIONS Daniel Schwartz & Gary Porter Power Transmission Design August, 1996 Securing a belt pulley to a drive shaft often seems like such a routine task, that engineers and
More informationFOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
More informationROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
More informationRocker Lever Assembly
003-009 Rocker Lever Assembly Preparatory Steps Remove the air piping from the intake manifold. Remove the rocker lever cover. Refer to Procedure 003-011 in Section 3. Remove the engine brakes, if equipped.
More informationContents. BlackStar Bushings. BlackStar Bushings. 1
Contents Blacktar s Blacktar s Q tyle s............................................................. T s................................................................. plit Taper s...........................................................
More informationContents. Belt Tension Checker Instruction Sheet
Contents Instructions For Quick etachable Bushings... 1-2 Gear-Belt Installation Instructions... 3-4 Belt Tension Checker Instruction Sheet... 5-6 The V-Belt rive is industry s most popular means of power
More informationStock QD Bushings. DISMOUNTING 1. Remove pull-up bolts and screw them into TAPPED holes in sheave or sprocket and against flange of QD bushing to
Stock Q s MOUNTING ROCEURE Q USHINGS IMORTANT E SURE TAERE CONE SURFACES OF Q USHING AN INSIE OF SHEAVE OR SROCKET HU ARE RY AN FREE OF ALL FOREIGN SUSTANCES SUCH AS AINT, GREASE, OR IRT. STANAR MOUNTING
More informationService Parts Instructions
Issued 07-00 Service Parts Instructions RPL Series Permalube TM Generation II Driveline Removal and Installation WARNING To prevent serious eye injury, always wear safe eye protection when you perform
More information1988 Chevrolet Pickup V SUSPENSION - FRONT (4WD)' 'Front Suspension - "V" Series 1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series
1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series DESCRIPTION NOTE: Vehicle serial numbers used in this article has been abbreviated for common reference to Chevrolet and GMC models. Chevrolet
More informationNew Holland TR MAV Complete Chopper Installation Guide
TM New Holland TR MAV - 100 Complete Chopper Installation Guide CH003-01_SEP_2014 ROTOR BLADE A IMPORTANT! The paddle blades, located on the balance rings inside the chopper, must be installed in the direction
More informationCONTENTS Bushings and Hubs
CONTENTS s and Hubs TPER-LOCK s Features/Benefits............................................................. PT6-2 Nomenclature................................................................. PT6-2
More informationModel QED-D, QED-A, QED-L
This supplement is for Field Service use only, as complete dis-assembly and re-assembly of the QED reducer by the customer is NOT recommended. This supplement only extends to single reduction QED units.
More information"K" Series Food and Beverage Duty Reducer
"K" Series Food and Beverage Duty Reducer "K" Series Food and Beverage Duty Reducer Installation and Maintenance Guide 16 STOBER Drives Inc. Food and Beverage Duty Reducer Maintenance Guide www.stober.com
More informationROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
More informationSERVICE MANUAL for. Engine-to-Generator. Part Number used on. John Deere Engine Driven Aircraft Ground Power Single-Bearing Generator Sets
TO-216 SERVICE MANUAL for Engine-to-Generator FLEXIBLE COUPLING Part Number 181267 used on John Deere Engine Driven Aircraft Ground Power Single-Bearing Generator Sets manufactured by HOBART BROTHERS COMPANY
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2505 Lowering Spindle Assembly Installation Instructions ½ TON SILVERADO
More informationBoston Gear LOR Series
Boston Gear LOR Series Trig-O-Matic Lite Overload Release Clutch Installation and Maintenance Instructions Doc. No. LOR Series Trig-O-Matic Lite www.bostongear.com LOR SERIES TRIG-O-MATIC LITE OVERLOAD
More informationRigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
More informationSize 7.0 Mesur-Fil Fluid Couplings P-1033 WC-96
Size 7.0 Mesur-Fil Fluid Couplings P-1033 WC-96 Installation Instructions Size 7.0 Fluid Couplings Models HC, HCF, HCM, HBM 7 22 21 HCF Input (see page 5) Optional 13 Input Side Output Side Standard 13
More informationTransmission Overhaul Procedures-Bench Service
How to Assemble the Lower Reverse Idler Gear Assembly Special Instructions In 1996 Eaton changed the reverse idler system design. In the nut design, the reverse idler bearing was lubricated through a hole
More informationFORM NO GB Rev A OPERATOR S MANUAL MODEL NO & UP MODEL NO & UP REELMASTER 5100 CUTTING UNIT
FORM NO. 3318-294 GB Rev A MODEL NO. 03505 60001 & UP MODEL NO. 03508 60001 & UP OPERATOR S MANUAL REELMASTER 5100 CUTTING UNIT The TORO COMPANY 1991, Rev. 1992, 1993, 1994 Table of Contents Page No. SPECIFICATIONS
More informationPage 1 of 15 Transmission, Model S5-42 ZF Model S5-42 ZF Disassembly NOTE: For 4x4 and F-Super Duty vehicles, skip to Step 5. 1. Attach the transmission to the Bench Mounted Holding Fixture T57L-500-B
More informationMaintenance Instructions
General Note These instructions contain information common to more than one model of Bevel Gear Drive. To simplify reading, similar models have been grouped as follows: GROUP 1 Models 11, 0, 1,, (illustrated),,
More informationSKF Flex Coupling Installation Instructions
SKF Flex Coupling Installation Instructions The performance of the coupling depends largely upon how you install and maintain. 1. Thoroughly clean all components, paying particular attention to the removal
More informationSize 9.4 Mesur-Fil Fluid Couplings P WC-97
Size 9.4 Mesur-Fil Fluid Couplings P-1033-1 WC-97 Installation Instructions Size 9.4 Fluid Couplings Models HC, HCF, HCM, HBM 22 21 HCF Input (see page 5) 13 Input Side Optional Output Side Standard 13
More informationFront Hub and Disc (4WD Model)
4C 8 DRIVE SHAFT SYSTEM Disassembled View Front Hub and Disc (4WD Model) 411RW001 Legend (1) Bolt (2) Cap (3) Snap Ring and Shim (4) Hub Flange (5) Lock Washer and Lock Screw (6) Hub Nut (7) Outer Bearing
More informationINSTRUCTION MANUAL FOR DODGE GRID-LIGN FLEXIBLE COUPLINGS
INSTRUCTION MANUAL FOR DODGE GRID-LIGN FLEXIBLE COUPLINGS Sizes 1020-1140 T10 (Close Coupled, Horizontally Split Cover) T20 (Close coupled, Vertically Split Covers) T31 (Full Spacer ) T35 (Half Spacer
More informationCT/GT CONVERSION INSTRUCTIONS
Your CT/GT conversion kit is provided with the components listed below. All other part numbers listed throughout this supplement directly correspond to the CT agitator manual and represent the existing
More information11-24 CKCP: KCM: 7-34 CKCM:
INSTALLATION INSTRUCTION MANUAL for Fluid Couplings Coupling Styles: KCP: 11-24 CKCP: 12-24 KCM: 7-34 CKCM: 12-34 Sheave Style: KSD: 7-24 Major Topics: I. Description II. Installation/Disassembly III.
More informationInstallation and Maintenance Instructions JSE MAEAD Extruder Clutch. World Leader in Modular Torque Limiters
World Leader in Modular Torque Limiters Installation and Maintenance Instructions JSE.5-0104MAEAD Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail:
More information3.2 DRIVE TORQUE HUB. Roll, Leak and Brake Testing SECTION 3 - CHASSIS & TURNTABLE. 3-2 JLG Lift
3.2 DRIVE TORQUE HUB Roll, Leak and Brake Testing 10 LUG PATTERN Torque-Hub units should always be roll and leak tested before disassembly and after assembly to make sure that the unit's gears, bearings
More informationTORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
More informationDISASSEMBLY AND ASSEMBLY
211-02-1 Power Steering 211-02-1 DISASSEMBLY AND ASSEMBLY Steering Gear Special Tool(s) Holding Fixture, Transmission 307-003 (T57L-500-B) Special Tool(s) Installer, Worm Bearing Locknut 211-012 (T66P-3553-B)
More informationInstruction Manual for HSPA Take-Up Units
Installation Instruction Manual for HSPA Take-Up Units Warning: To ensure the drive is not unexpectedly started, turn off and lockout the power source before proceeding. Failure to observe these precautions
More informationMODEL VBO-HV & VBO UPBLAST PROPELLER ROOF FANS
READ AND SAVE THESE INSTRUCTIONS 9668-D Heinrich Hertz Drive, San Diego, CA 92154 PH: 619-946-1224 MODEL VBO-HV & VBO UPBLAST PROPELLER ROOF FANS SHIPPING INSPECTION Romlair Model VBO-HV & VBO fans are
More informationMaintenance Instructions. World Leader in Modular Torque Limiters. JSE AEA Extruder Clutch
World Leader in Modular Torque Limiters PROTECTING EQUIPMENT& MACHINERYYEARSInstallation and Maintenance Instructions JSE.5-0234AEA Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940)
More informationSUSP-09, Rear Wheel Bearing Replacement - Steel Trailing Arm. Acrobat Printable Version
SUSP-09, Rear Wheel Bearing Replacement - Steel Trailing Arm Introduction Acrobat Printable Version I'd like to thank Ben Davis for providing the pictures for this procedure. Ben took the time to take
More information1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
More informationA L T R A I N D U S T R I A L M O T I O N. Synchronous Drives
A L T R A I N D U S T R I A L M O T I O N Synchronous Drives SECTION A1 WOOD S SURE-GRIPTM QD BUSHINGS Provide a True Clamp Fit Are Easy to Install and Remove Permit Four-Way Mounting A1 1 SURE-GRIP BUSHING
More informationF O R M. Rotating Biological Contractor Drives Installation and Maintenance Manual. 8368E Revised October Table of Contents.
Rotating Biological Contractor Drives Installation and Maintenance Manual Power Transmission Solutions Regal Beloit America, Inc. 7120 New Buffington Road Florence, KY 41042 Application Engineering: 800
More informationF O R M. Torq/Gard Installation, Operation and Maintenance Instructions. 8322E Revised March 2016 CAUTION WARNING
Torq/Gard Installation, Operation and Maintenance Instructions Power Transmission Solutions Regal Beloit America, Inc. 7120 New Buffington Road Florence, KY 41042 Application Engineering: 800 626 2093
More informationTRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
More informationParts List Single Reduction Models, Cast Iron Units
Parts List Single Reduction Models, Cast Iron Units 60 51 51 10 24 11 11 9 24 12 19 17 27 31 8 23 7 14 20 28 26 5 1 2 6 44 60 50 23 7 6 30 27 30 4 3 30 13 29 14 22 18 27 43 48 50 8 15 16 12 25 9 51 51
More informationDISASSEMBLY. Transmission. 2. Remove the 4 clutch housing bolts. Separate the clutch housing from the transmission.
308-03A-1 DISASSEMBLY Transmission 308-03A-1 Special Tool(s) Puller, Bearing 205-D064 (D84L-1123-A) or equivalent Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C) 2. Remove the 4 clutch housing
More information3404 Assembly Instructions Trailer Drawing Parts List Assembly Instructions Drawing 7.
TABLE OF CONTENTS Title Page 3404 Assembly Instructions 3 3404 Trailer Drawing 4 3404 Parts List 5 3405 Assembly Instructions 6 3405 Drawing 7 3405 Parts List 8 341-002 341-006 Mounting Kits 9 341-008
More informationSECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY.
SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY. 1. Wear personal protective equipment such as, but not limited to protection
More information1984 Dodge W250 PICKUP
1984 Dodge W250 PICKUP Submodel: Engine Type: V8 Liters: 5.2 Fuel Delivery: CARB Fuel: GAS Dana 44 MODELS THROUGH 1984 2. Raise and safely support the vehicle, then remove the wheel hub and bearings as
More informationSize 12.4 Mesur-Fil Fluid Couplings P WC-98
Size 12.4 Mesur-Fil Fluid Couplings P-1033-3 WC-98 Installation Instructions Size 12.4 Fluid Couplings Contents Models HC, HCF, HCM, HBM Components and Part Numbers............2 Assembly Instruction.....................3
More informationTECHNICAL BULLETIN. TP Issued Servicing Rockwell s TB Series Trailer Axles with Unitized Hub Assemblies
TECHNICAL BULLETIN TP-96175 Issued 12-96 Servicing Rockwell s TB Series Trailer Axles with Unitized Hub Assemblies TB Series Trailer Axles Introduction Rockwell s TB series trailer axle features a permanently
More informationLOR Series Trig-O-Matic Lite Overload Release Clutch
LOR Series Trig-O-Matic Lite Overload Release Clutch P-3029-BG LOR Series Installation and Operation An Altra Industrial Motion Company Contents I. Introduction A. Operating Principle... 3 B. Torque Adjustment...
More informationCONTENTS. VIKING PUMP, INC. A Unit of IDEX Corporation Cedar Falls, IA USA SECTION TSM 710.1
TECHNICAL SERVICE MANUAL industrial heavy duty motor speed pumps SERIES 4076 AND 4176 SIZES hle, ate and ale SECTION TSM 710.1 PAGE 1 of 8 ISSUE B CONTENTS Introduction....................... 1 Safety
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2000 1984 1991 Toyota 2 Wheel Drive Pick-Ups 2 Front Dropped Spindles Congratulations!
More informationASSEMBLY / DISASSEMBLY
ASSEMBLY / DISASSEMBLY QUANTIS Bolts To Be Used On Mounting Feet In addition to the bolts below, it is recommended that a lockwasher or other anti-loosening device be used. QUANTIS ILH Unit Size SAE Grade
More informationGear Products Inc N. 161st E. Ave. Tulsa, OK Phone (918) Fax (918)
SERVICE MANUAL Disassembly & Assembly Procedures Worm Gear Swing Drive 003 Series Gear Products Inc. 1111 N. 161st E. Ave. Tulsa, OK 74116 Phone (918) 234-3044 Fax (918) 234-3455 Worm Gear Swing Drive
More informationFRONT STABILIZER BAR KIT
FRONT STABILIZER BAR KIT P/N 2881205 APPLICATION RZR XP 1000 MY16 and Newer, RZR XP 4 1000 MY16 and Newer BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More informationBrakes. FREE BACKING # Right # Left. UNI-SERVO # Right # Left. Page 1. 1/15 BC20011, Rev 6
1/15 BC20011, Rev 6 Brakes FREE BACKING #01971 - Right #01970 - Left UNI-SERVO #07911 - Right #07910 - Left ASSEMBLY CALIBRATION OPERATION REPLACEMENT PARTS Page 1 WARNING: To Prevent Serious Injury or
More informationAgri-Fab OWNERS MANUAL. Model No LB. PUSH BROADCAST SPREADER. Assembly Operation Maintenance Repair Parts
Agri-Fab OWNERS MANUAL Model No. 45-02103-101 SHIELD UP - 8 TO 18 FT. SPREAD WIDTH SHIELD DOWN - 3 TO 4 FT. SPREAD WIDTH 125 LB. PUSH BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions
More informationST11 Structural Straightening
Uniform Procedures For Collision Repair ST11 Structural Straightening 1. Description This procedure describes repair methods and inspection requirements for straightening structural parts using hydraulic
More informationMOTORS. Features: UL Certificate of Compliance CSA Approved and CE Marked Designed for 40 Ambient Temperature, 3300 Ft. Elevation NEMA Design B Torque
BALDOR MOTORS MOTORS ODP Motors - Three Phase Integral Horsepower General Purpose Motors Rigid Base 2, 4 & 6 Pole NEMA Premium & EPACT Class F Insulation System Inverter Duty 1.15 Service Factor 60 Hz
More informationInstallation and Maintenance Instructions JSE1-0128MAEAD Extruder Clutch. World Leader in Modular Torque Limiters
World Leader in Modular Torque Limiters Installation and Maintenance Instructions JSE1-0128MAEAD Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail:
More informationProduct Name Chair Conversion Kit (to LR Delivery Unit) Installation [Kit # xx]
Elevance Product Name Chair Conversion Kit (to LR Delivery Unit) Installation Installation [Kit #002-1966-xx] Attention: Use this kit to convert an Elevance Chair to a Chair with an Elevance LR mounted
More informationInstruction Manual For DODGE. Airport Baggage Handling Systems Speed Reducers
Instruction Manual For DODGE Airport Baggage Handling Systems Speed Reducers ABHS TXT109 - TXT115 - TXT125 ABHS TXT209 - TXT215 - TXT225 ABHS TXT309A - TXT315A - TXT325A ABHS TXT409A - TXT415A - TXT425A
More informationEmerson Power Transmission P.O. Box 687 Maysville, KY Phone:
Torq/Gard Installation, Operation and Maintenance Instructions Emerson Power Transmission P.O. Box 687 Maysville, KY 41056 Phone: 606-564-2093 www.emerson-ept.com FORM 8322 Revised June 2007 Installation
More informationElectrically Released Brakes FB-375, 475, 650
P-237 819-0289 Electrically Released Brakes FB-375, 475, 650 Installation Instructions Contents Introduction............................ 3 Installing the Brake...................... 4 Power Supplies and
More informationINSTRUCTIONS FOR OVERHAUL OF RAMEY RE SERIES WINCH
INSTRUCTIONS FOR OVERHAUL OF RAMEY RE 12000 SERIES WINCH DISASSEMBLY 1. Drain oil from gear housing by removing plug # from bottom of gear housing. Remove relief fitting # and reducer # from top of gear
More informationInstruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings
Instruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings Installation SDAF SD & S3000 SAF Warning: To ensure that the drive is not unexpectedly started,
More informationTECHNICAL SERVICE MANUAL
TECHNICAL SERVICE MANUAL VIKING HELICAL GEAR REDUCERS "A", "B", AND "C" SIZES SECTION TSM 610 PAGE 1 OF 9 ISSUE E CONTENTS Special Information 2 Lubrication 2 Installation 3 Operation 3 Disassembly 3 Assembly
More informationINSTRUCTION AND REPAIR MANUAL
SECTION ITEM 0A DATED JANUARY 999 SUPERSEDES SECTION ITEM 0A DATED JULY 99 INSTRUCTION AND REPAIR MANUAL MODEL 4A-5A-A and 0B SINGLE STAGE and TWO STAGE This repair manual is applicable to pump models
More informationMaintenance Instructions & Parts List
Maintenance Instructions Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When Ordering Spare Parts. General Limit the maximum operational pressure of the Parker M
More informationElectrically Released Brakes FB-375, 475, 650
Electrically Released Brakes FB-375, 475, 650 P-0237-WE 819-0289 Installation Instructions An Altra Industrial Motion Company Contents Introduction... 3 Installing the Brake... 4 Power Supplies and Electrical
More informationTECHNICAL SERVICE MANUAL GENERAL PURPOSE BRACKET MOUNTED PUMPS SERIES 115 MODELS G, GX2, H and HX4
TECHNICAL SERVICE MANUAL GENERAL PURPOSE BRACKET MOUNTED PUMPS SERIES 115 MODELS G, GX2, H and HX4 SECTION 2 BULLETIN TSM-115-C ISSUE A CONTENTS Special Information 2 Maintenance 2 Packed Pump Breakdown
More informationPROSPECTOR TRACK MOUNT KIT
PROSPECTOR TRACK MOUNT KIT P/N 2882109 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain
More informationSIT-LOCK self locking elements
self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with
More informationWD DODGE SUSPENSION LIFT KIT P/N
4/03/03 94-01 4WD DODGE 1500 3 SUSPENSION LIFT KIT P/N 10-46094 NOTE: Each lift kit, and options to lift kits, are packaged separately. Therefore installation procedures are covered in separate instructions.
More informationWARNING DO NOT USE THE PRODUCTS IN THIS GUIDE IN AIRCRAFT APPLICATIONS. THE PRODUCTS IN THIS GUIDE ARE NOT INTENDED FOR USE IN AIRCRAFT APPLICATIONS.
P O W E R T R A N S M I S S I O N P R O D U C T S power transmission belt drive system Installation, Maintenance and Troubleshooting Guide WARNING DO NOT USE THE PRODUCTS IN THIS GUIDE IN AIRCRAFT APPLICATIONS.
More informationCAMOPLAST MOUNTING KIT, RANGER 900 P/N
CAMOPLAST MOUNTING KIT, RANGER 900 P/N 2879621 Application RANGER 900 XP MY13 AND NEWER Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain
More informationAgri-Fab OWNERS MANUAL. Model No LB. PUSH BROADCAST SPREADER. Assembly Operation Maintenance Repair Parts
Agri-Fab OWNERS MANUAL Model No. 45-02142 100 LB. PUSH BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to
More informationElectro-Brake 375, 475, 650, 825, 1000, 1225
Electro-Brake 375, 475, 650, 825, 1000, 1225 P-211-WE 819-0043 Installation Instructions An Altra Industrial Motion Company Contents Installation Instructions.... 2 Electrical Coil Data.... 5 Burnishing
More informationWJ AUTO TRANS. ATLAS SHIFTER
KIT CONSISTS OF: No. Qty Part No. Description 4320 Aerotech Center Way, Page 1 of 8 1 1 302051 BASE- ATLAS TWIN STICK MOUNT 2 1 302080 STUD BOLT 1/2-13 X 7 B7 3 1 303120 Serrated-Flange Hex Locknut 1/2-13
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS DISC BRAKE CONVERSION KITS A121-1, A121-2, A121-3, A121-4 1967-69 Ford & Mercury Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases take
More informationTidland Air Brake. Installation, Operation, and Maintenance. Models 200, 250, 305, 380, 460, 610
Tidland Air Brake Installation, Operation, and Maintenance Models 200, 250, 305, 380, 460, 610 TABLE OF CONTENTS TIDLAND CUSTOMER SERVICE... 2 RECOMMENDED TOOLS... 2 CAUTION... 2 INSTALLATION... 3 Caliper
More informationAIR CHAMP PRODUCTS. User Manual. Models DPC-9T and DPC-11T. (i) FORM NO. L C-0501
AIR CHAMP PRODUCTS User Manual Models DPC-9T and DPC-11T (i) In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change
More informationBELT DRIVE SYSTEM TROUBLESHOOTING CHART CAUSES CORRECTIVE ACTION ENGINE RUNS BUT PADDLES DO NOT TURN
ELT DRIVE SYSTEM TROULESHOOTING HRT USES ORRETIVE TION ENGINE RUNS UT PDDLES DO NOT TURN elt jumps off the drive pulleys. Inspect the belt for damage. Replace belt if needed. heck belt alignment. Idler
More informationBlue Jay Rodless Cylinder BC MS. Track Repair Manual 1996 & 2012 THE EASTMAN EASTMAN. All End Caps Black for Models
EASTMAN 1996 & 2012 THE EASTMAN Blue Jay Rodless Cylinder BC-40224-MS Track Repair Manual All End Caps Black for 1996-2012 Models IMPORTANT Disconnect this equipment from pneumatic pressure lines before
More informationATLAS TRANSFER CASES CABLE SHIFTER units built after 5/1/12
KIT CONSISTS OF: No. Qty Part No. Description P.O. Box 247, 4320 Aerotech Center Way PAGE 1 OF 6 Page Rev. Date: 08-01-17 1 1 302051 BASE- TWIN STICK MOUNT 2 1 302060 BOOT- TWIN STICK 3 1 302063 BOOT RING-
More informationWood s Sure-Grip Pulleys
Wood s SureGrip Pulleys B5 Statically Balanced Up to 65 feet per minute rim speed Dynamic balance based on rim speed and face width P1686TBW 11/15... TB Wood s 888896637 B51 SureGrip Pulleys Dimensions
More informationPower Transmission Belt Drive System Installation, Maintenance and Troubleshooting Guide
Power Transmission Drive System Installation, Maintenance and Troubleshooting Guide www.contitech.us Table of Contents Installation Guide 2 Table of Contents Installation V-s V-s 3 Banded s Torque Team
More informationService Bulletin No. 3033
MODEL TYPE SECTION/GROUP DATE G Series Coaches Product Improvement 2--Rear Axle Mar. 31, 2010 SUBJECT CONDITIONS BEARING BOX Parts may be purchased from MCI Service Parts, Louisville, Kentucky or from
More informationHUB & WHEEL INSTALLATION
HUB & WHEEL INSTALLATION 1.0 SCOPE This specification covers the torque requirements for the attachment of all component parts of Spoke Wheels, Rims, Tyres and Hub assemblies. 1.1 Spoke Wheels CAUTION:
More informationPRODUCT OBSOLETED 1Q16
TECHNICAL SERVICE MANUAL HEAVY DUTY STEEL EXTERNAL MOUNTED PUMPS SERIES 123 AND 4123 SIZES H-LL SECTION TSM 151.1 PAGE 1 OF 13 ISSUE C CONTENTS Introduction 1 Special Information 2 Maintenance 3 Packed
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationClutch, servicing. Special tools, testers and auxiliary items required. Flywheel retainer Thrust pad 3062
Page 1 of 10 30-36 Clutch, servicing Special tools, testers and auxiliary items required Flywheel retainer 10-201 Thrust pad 3062 Page 2 of 10 30-37 Centering mandrel 3176 Grease G 000 100 Notes: Observe
More informationAT Clutch Major Service Sizes 25, 55, 115
P-1404 819-0324 AT Clutch Major Service Sizes 25, 55, 115 Installation Instructions Contents Introduction............................ 2 Warranty....................... back cover Failure to follow these
More informationTRACK OPERATION ALIGNMENT MAINTENANCE LUBRICATION
TRACK OPERATION ALIGNMENT MAINTENANCE LUBRICATION 265939 Manufactured At: Unverferth Manufacturing Co., Inc. 27612 Temple Ave. Shell Rock, IA 50670 PH: 319-885-6571 Fax: 319-885-6576 Part #265941 INDEX
More informationINSTALLATION INSTRUCTIONS REPAIR SEAL KIT PowerSurvivor 40E
INSTALLATION INSTRUCTIONS REPAIR SEAL KIT PowerSurvivor 40E PURPOSE OF THE KIT The Repair Seal Kit should be installed after 1000 hours of operation. It should be installed regardless of whether or not
More informationTECHNICAL SERVICE MANUAL
Electronic copies of the most current TSM issue can be found on the Viking Pump website at www.vikingpump.com TECHNICAL SERVICE MANUAL HEAVY-DUTY Stainless steel PUMPS SERIES 4197 SIZES GG, hj, hl, as,
More informationTECHNICAL SERVICE MANUAL
Electronic copies of the most current TSM issue can be found on the Viking Pump website at www.vikingpump.com TECHNICAL SERVICE MANUAL industrial heavy duty motor speed pumps SERIES 4076 AND 4176 SIZES
More informationINSTALLATION INSTRUCTION 88148
INSTALLATION INSTRUCTION 88148 Rev C For Rancho Suspension Systems RS6548, RS6549 & RS6550: GM 2500HD, 2500, and 1500HD Trucks READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION
More informationMaintenance Information
16575128 Edition 2 May 2014 Air Grinder, Sander or Polisher 77A Series Maintenance Information Save These Instructions Product Safety Information Failure to observe the following warnings, and to avoid
More information